Skip to contentSkip to conversation

mkfs: add configuration files for the last few LTS kernels

PATCH Superseded Darrick J. Wong 1 participant 2 messages Dec 17, 2021

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 mkfs: add configuration files for the last few LTS kernels

From: Darrick J. Wong <[email protected]>

Add some sample mkfs configuration files that capture the mkfs feature defaults at the time of the release of the last three upstream LTS kernels.

---
 include/builddefs.in |    1 +
 mkfs/Makefile        |    6 +++++-
 mkfs/lts_4.19.conf   |   13 +++++++++++++
 mkfs/lts_5.10.conf   |   13 +++++++++++++
 mkfs/lts_5.15.conf   |   13 +++++++++++++
 5 files changed, 45 insertions(+), 1 deletion(-)
 create mode 100644 mkfs/lts_4.19.conf
 create mode 100644 mkfs/lts_5.10.conf
 create mode 100644 mkfs/lts_5.15.conf
include/builddefs.in +1 -0
index f10d1796..ca4b5fcc 100644
@@ -66,6 +66,7 @@ DK_INC_DIR	= @includedir@/disk
 PKG_MAN_DIR	= @mandir@
 PKG_DOC_DIR	= @datadir@/doc/@pkg_name@
 PKG_LOCALE_DIR	= @datadir@/locale
+PKG_DATA_DIR	= @datadir@/@pkg_name@
 
 CC		= @cc@
 BUILD_CC	= @BUILD_CC@
mkfs/Makefile +5 -1
index 811ba9db..04d17fdb 100644
@@ -9,19 +9,23 @@ LTCOMMAND = mkfs.xfs
 
 HFILES =
 CFILES = proto.c xfs_mkfs.c
+CFGFILES = lts_4.19.conf lts_5.10.conf lts_5.15.conf
 
 LLDLIBS += $(LIBXFS) $(LIBXCMD) $(LIBFROG) $(LIBRT) $(LIBPTHREAD) $(LIBBLKID) \
 	$(LIBUUID) $(LIBINIH) $(LIBURCU)
 LTDEPENDENCIES += $(LIBXFS) $(LIBXCMD) $(LIBFROG)
 LLDFLAGS = -static-libtool-libs
 
-default: depend $(LTCOMMAND)
+default: depend $(LTCOMMAND) $(CFGFILES)
 
 include $(BUILDRULES)
 
 install: default
 	$(INSTALL) -m 755 -d $(PKG_ROOT_SBIN_DIR)
 	$(LTINSTALL) -m 755 $(LTCOMMAND) $(PKG_ROOT_SBIN_DIR)
+	$(INSTALL) -m 755 -d $(PKG_DATA_DIR)/mkfs
+	$(INSTALL) -m 644 $(CFGFILES) $(PKG_DATA_DIR)/mkfs
+
 install-dev:
 
 -include .dep
mkfs/lts_4.19.conf new file +13 -0
new file mode 100644
index 00000000..74144790
@@ -0,0 +1,13 @@
+# V5 features that were the mkfs defaults when the upstream Linux 4.19 LTS
+# kernel was released at the end of 2019.
+
+[metadata]
+bigtime=0
+crc=1
+finobt=1
+inobtcount=0
+reflink=0
+rmapbt=0
+
+[inode]
+sparse=1
mkfs/lts_5.10.conf new file +13 -0
new file mode 100644
index 00000000..ac00960e
@@ -0,0 +1,13 @@
+# V5 features that were the mkfs defaults when the upstream Linux 5.10 LTS
+# kernel was released at the end of 2020.
+
+[metadata]
+bigtime=0
+crc=1
+finobt=1
+inobtcount=0
+reflink=1
+rmapbt=0
+
+[inode]
+sparse=1
mkfs/lts_5.15.conf new file +13 -0
new file mode 100644
index 00000000..32082958
@@ -0,0 +1,13 @@
+# V5 features that were the mkfs defaults when the upstream Linux 5.15 LTS
+# kernel was released at the end of 2021.
+
+[metadata]
+bigtime=1
+crc=1
+finobt=1
+inobtcount=1
+reflink=1
+rmapbt=0
+
+[inode]
+sparse=1
author NAK
#1 lore raw
Quoted 6 lines · Darrick J. Wong

From: Darrick J. Wong <[email protected]>

Add some sample mkfs configuration files that capture the mkfs feature defaults at the time of the release of the last three upstream LTS kernels.

Quoted 7 lines
---
 include/builddefs.in |    1 +
 mkfs/Makefile        |    6 +++++-
 mkfs/lts_4.19.conf   |   13 +++++++++++++
 mkfs/lts_5.10.conf   |   13 +++++++++++++
 mkfs/lts_5.15.conf   |   13 +++++++++++++

NAK, this is missing a config file for 5.4.

Also Eric prodded me to add a comment to the default feature config structure definition reminding people to keep the conffiles up to date.

v2 on its way...

--D

Quoted 103 lines
 5 files changed, 45 insertions(+), 1 deletion(-)
 create mode 100644 mkfs/lts_4.19.conf
 create mode 100644 mkfs/lts_5.10.conf
 create mode 100644 mkfs/lts_5.15.conf
include/builddefs.in +1 -0
index f10d1796..ca4b5fcc 100644
@@ -66,6 +66,7 @@ DK_INC_DIR	= @includedir@/disk
 PKG_MAN_DIR	= @mandir@
 PKG_DOC_DIR	= @datadir@/doc/@pkg_name@
 PKG_LOCALE_DIR	= @datadir@/locale
+PKG_DATA_DIR	= @datadir@/@pkg_name@
 
 CC		= @cc@
 BUILD_CC	= @BUILD_CC@
mkfs/Makefile +5 -1
index 811ba9db..04d17fdb 100644
@@ -9,19 +9,23 @@ LTCOMMAND = mkfs.xfs
 
 HFILES =
 CFILES = proto.c xfs_mkfs.c
+CFGFILES = lts_4.19.conf lts_5.10.conf lts_5.15.conf
 
 LLDLIBS += $(LIBXFS) $(LIBXCMD) $(LIBFROG) $(LIBRT) $(LIBPTHREAD) $(LIBBLKID) \
 	$(LIBUUID) $(LIBINIH) $(LIBURCU)
 LTDEPENDENCIES += $(LIBXFS) $(LIBXCMD) $(LIBFROG)
 LLDFLAGS = -static-libtool-libs
 
-default: depend $(LTCOMMAND)
+default: depend $(LTCOMMAND) $(CFGFILES)
 
 include $(BUILDRULES)
 
 install: default
 	$(INSTALL) -m 755 -d $(PKG_ROOT_SBIN_DIR)
 	$(LTINSTALL) -m 755 $(LTCOMMAND) $(PKG_ROOT_SBIN_DIR)
+	$(INSTALL) -m 755 -d $(PKG_DATA_DIR)/mkfs
+	$(INSTALL) -m 644 $(CFGFILES) $(PKG_DATA_DIR)/mkfs
+
 install-dev:
 
 -include .dep
mkfs/lts_4.19.conf new file +13 -0
new file mode 100644
index 00000000..74144790
@@ -0,0 +1,13 @@
+# V5 features that were the mkfs defaults when the upstream Linux 4.19 LTS
+# kernel was released at the end of 2019.
+
+[metadata]
+bigtime=0
+crc=1
+finobt=1
+inobtcount=0
+reflink=0
+rmapbt=0
+
+[inode]
+sparse=1
mkfs/lts_5.10.conf new file +13 -0
new file mode 100644
index 00000000..ac00960e
@@ -0,0 +1,13 @@
+# V5 features that were the mkfs defaults when the upstream Linux 5.10 LTS
+# kernel was released at the end of 2020.
+
+[metadata]
+bigtime=0
+crc=1
+finobt=1
+inobtcount=0
+reflink=1
+rmapbt=0
+
+[inode]
+sparse=1
mkfs/lts_5.15.conf new file +13 -0
new file mode 100644
index 00000000..32082958
@@ -0,0 +1,13 @@
+# V5 features that were the mkfs defaults when the upstream Linux 5.15 LTS
+# kernel was released at the end of 2021.
+
+[metadata]
+bigtime=1
+crc=1
+finobt=1
+inobtcount=1
+reflink=1
+rmapbt=0
+
+[inode]
+sparse=1