imx6: Enable ACTLR.SMP in SPL
Subsystems (3)
PATCH 1/1 imx6: Enable ACTLR.SMP in SPL
Similar to what has been done before with c5437e5b for u-boot proper, we enable the SMP bit for SPL as well. This is necessary when SDP booting straight into Linux, i.e. falcon boot. When SDP boot mode is active, the ROM code does not set this bit which makes the caches not work once activated in Linux.
Signed-off-by Sven Schwermer <[email protected]>
--- arch/arm/include/asm/mach-imx/sys_proto.h | 5 +++++ arch/arm/mach-imx/cache.c | 2 +- arch/arm/mach-imx/mx6/soc.c | 3 +++ 3 files changed, 9 insertions(+), 1 deletion(-)
arch/arm/include/asm/mach-imx/sys_proto.h +5 -0
@@ -236,4 +236,9 @@ unsigned long call_imx_sip_ret2(unsigned long id, unsigned long reg0, unsigned long reg3);void imx_get_mac_from_fuse (int dev_id,unsigned char *mac); + +#if defined(CONFIG_MX6 ) || defined(CONFIG_MX7 ) +void enable_ca7_smp (void ); +#endif +#endif
arch/arm/mach-imx/cache.c +1 -1
@@ -11,7 +11,7 @@#include <asm/io.h> #include <asm/mach-imx/sys_proto.h> -static void enable_ca7_smp (void ) +void enable_ca7_smp (void ) {u32 val;
arch/arm/mach-imx/mx6/soc.c +3 -0
@@ -487,6 +487,9 @@ int arch_cpu_init(void)if (is_mx6dqp ())noc_setup ();#endif + +enable_ca7_smp (); +return 0 ; }
Signature · 1 line
2.34.1