Skip to contentSkip to conversation

arm: dts: Aspeed: add Bletchley dts

PATCH In review Potin Lai 3 participants 4 messages Jan 4, 2022 – Jan 19, 2022 Arm (32-bit)

lore
Share & tools
lore

Potin Lai

author
#0 lore raw

PATCH v2 1/1 arm: dts: Aspeed: add Bletchley dts

Initial introduction of Bletchley equipped with
Aspeed 2600 BMC SoC.

---

Change since v1:
- Disable mdio0, mdio1, mdio2
- Remove mac0, mac1, mac3 (keep disabled)
- Enable mac2, and set to fixed-link

---
 arch/arm/dts/Makefile              |   3 +-
 arch/arm/dts/ast2600-bletchley.dts | 285 +++++++++++++++++++++++++++++
 2 files changed, 287 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/ast2600-bletchley.dts
arch/arm/dts/Makefile +2 -1
index df844065cd..a172a9f8c6 100755
@@ -685,7 +685,8 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	ast2600-rainier.dtb \
 	ast2600-slt.dtb \
 	ast2600-tacoma.dtb \
-	ast2600-intel.dtb
+	ast2600-intel.dtb \
+	ast2600-bletchley.dtb
 
 dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb
 
arch/arm/dts/ast2600-bletchley.dts new file +285 -0

285 lines not on this page · raw message

Signature · 1 line
2.17.1
Reviewed-by on v2 1/1
#1 lore raw
Quoted 11 lines · Potin Lai

Initial introduction of Bletchley equipped with
Aspeed 2600 BMC SoC.

---

Change since v1:
- Disable mdio0, mdio1, mdio2
- Remove mac0, mac1, mac3 (keep disabled)
- Enable mac2, and set to fixed-link

Quoted 6 lines
---
 arch/arm/dts/Makefile              |   3 +-
 arch/arm/dts/ast2600-bletchley.dts | 285 +++++++++++++++++++++++++++++
 2 files changed, 287 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/ast2600-bletchley.dts
Signature · 1 line
Patrick Williams
#2 lore raw
In reply to Potin Lai
Quoted 22 lines · Potin Lai

Initial introduction of Bletchley equipped with
Aspeed 2600 BMC SoC.

---

Change since v1:
- Disable mdio0, mdio1, mdio2
- Remove mac0, mac1, mac3 (keep disabled)
- Enable mac2, and set to fixed-link

---
 arch/arm/dts/Makefile              |   3 +-
 arch/arm/dts/ast2600-bletchley.dts | 285 +++++++++++++++++++++++++++++
 2 files changed, 287 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/ast2600-bletchley.dts
arch/arm/dts/Makefile +0 -0
index df844065cd..a172a9f8c6 100755

arch/arm/dts/Makefile dtb-$(CONFIG_ARCH_ASPEED) += \ · line 691

Quoted 8 lines
arch/arm/dts/Makefile +2 -1
@@ -685,7 +685,8 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	ast2600-rainier.dtb \
 	ast2600-slt.dtb \
 	ast2600-tacoma.dtb \
-	ast2600-intel.dtb
+	ast2600-intel.dtb \
+	ast2600-bletchley.dtb
 
 dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb

Does this depend on other changes that I missed? We don't have those lines in the Makefile today, thanks.

Signature · 1 line
Tom
#3 lore raw

Hi Tom,
Thank you for the reply.
It looks like some of changes are only appeared in openbmc u-boot repo.

Hi Joel,
Could you advise how to send the patch to openbmc u-boot repo? Thank you.

BRs,
Potin
-----Original Message-----
From: Tom Rini <[email protected]>
Sent: Wednesday, January 19, 2022 1:48 AM
To: Potin Lai (賴柏廷) <[email protected]>
Cc: Albert Aribaud <[email protected]>; Chia-Wei, Wang <[email protected]>; Dylan Hung <[email protected]>; Klaus Heinrich Kiwi <[email protected]>; Joel Stanley <[email protected]>; Patrick Williams <[email protected]>; [email protected]
Subject: Re: [PATCH v2] arm: dts: Aspeed: add Bletchley dts

Quoted 22 lines · Potin Lai

Initial introduction of Bletchley equipped with Aspeed 2600 BMC SoC.

---

Change since v1:
- Disable mdio0, mdio1, mdio2
- Remove mac0, mac1, mac3 (keep disabled)
- Enable mac2, and set to fixed-link

---
 arch/arm/dts/Makefile              |   3 +-
 arch/arm/dts/ast2600-bletchley.dts | 285 
+++++++++++++++++++++++++++++
 2 files changed, 287 insertions(+), 1 deletion(-)  create mode 100644 

arch/arm/dts/ast2600-bletchley.dts

arch/arm/dts/Makefile index renamed from arch/arm/dts/Makefile +0 -0

df844065cd..a172a9f8c6 100755

arch/arm/dts/Makefile dtb-$(CONFIG_ARCH_ASPEED) += \ · line 691

Quoted 8 lines
arch/arm/dts/Makefile +2 -1
@@ -685,7 +685,8 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	ast2600-rainier.dtb \
 	ast2600-slt.dtb \
 	ast2600-tacoma.dtb \
-	ast2600-intel.dtb
+	ast2600-intel.dtb \
+	ast2600-bletchley.dtb
 
 dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb

Does this depend on other changes that I missed? We don't have those lines in the Makefile today, thanks.

--
Tom