Skip to contentSkip to conversation

dt-bindings: rtc: st,stm32-rtc: Make each example a separate entry

PATCH Applied Rob Herring 2 participants 3 messages Jan 6, 2022 – Jan 20, 2022

Subsystems (3)
Device tree bindings Arm STM32 Real time clock (RTC)
lore
Share & tools
lore

Rob Herring

author maintainer
#0 lore raw

PATCH 1/1 dt-bindings: rtc: st,stm32-rtc: Make each example a separate entry

Each independent example should be a separate entry. This allows for 'interrupts' to have different cell sizes.

Signed-off-by Rob Herring <[email protected]>
---
 Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml +1 -0
index 2359f541b770..764717ce1873 100644
@@ -127,6 +127,7 @@ examples:
       st,syscfg = <&pwrcfg 0x00 0x100>;
     };
 
+  - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/stm32mp1-clks.h>
     rtc@5c004000 {
Signature · 1 line
2.32.0
author maintainer Applied
#1 lore raw
Quoted 8 lines · Rob Herring

Each independent example should be a separate entry. This allows for 'interrupts' to have different cell sizes.

Signed-off-by Rob Herring <[email protected]>
---
 Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml | 1 +
 1 file changed, 1 insertion(+)

Applied, thanks!

maintainer
#2 lore raw

Hello Rob,

Quoted 11 lines · Rob Herring
Quoted 8 lines · Rob Herring

Each independent example should be a separate entry. This allows for 'interrupts' to have different cell sizes.

Signed-off-by Rob Herring <[email protected]>
---
 Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml | 1 +
 1 file changed, 1 insertion(+)

Applied, thanks!

Just for the record, I didn't reply but I trust you completely on this one ;) I'm usually letting you apply dt-bindings only patches, let me know if you prefer they go through my tree.

Signature · 3 lines
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com