Skip to contentSkip to conversation

powerpc/pseries: Parse control memory access error

PATCH RESEND Applied Ganesh Goudar 2 participants 5 messages Jan 7, 2022 – Mar 8, 2022

Subsystems (2)
lore
Share & tools
lore
#1 lore raw

PATCH RESEND v3 2/3 selftests/powerpc: Add test for real address error handling

In reply to Ganesh Goudar

Add test for real address or control memory address access error handling, using NX-GZIP engine.

The error is injected by accessing the control memory address using illegal instruction, on successful handling the process attempting to access control memory address using illegal instruction receives SIGBUS.

---
 tools/testing/selftests/powerpc/Makefile      |  3 +-
 tools/testing/selftests/powerpc/mce/Makefile  |  7 ++
 .../selftests/powerpc/mce/inject-ra-err.c     | 65 +++++++++++++++++++
 tools/testing/selftests/powerpc/mce/vas-api.h |  1 +
 4 files changed, 75 insertions(+), 1 deletion(-)
 create mode 100644 tools/testing/selftests/powerpc/mce/Makefile
 create mode 100644 tools/testing/selftests/powerpc/mce/inject-ra-err.c
 create mode 120000 tools/testing/selftests/powerpc/mce/vas-api.h
tools/testing/selftests/powerpc/Makefile +2 -1
index 0830e63818c1..4830372d7416 100644
@@ -31,7 +31,8 @@ SUB_DIRS = alignment		\
 	   vphn         \
 	   math		\
 	   ptrace	\
-	   security
+	   security	\
+	   mce
 
 endif
 
tools/testing/selftests/powerpc/mce/Makefile new file +7 -0
new file mode 100644
index 000000000000..2424513982d9
@@ -0,0 +1,7 @@
+#SPDX-License-Identifier: GPL-2.0-or-later
+
+TEST_GEN_PROGS := inject-ra-err
+
+include ../../lib.mk
+
+$(TEST_GEN_PROGS): ../harness.c
tools/testing/selftests/powerpc/mce/inject-ra-err.c new file +65 -0

65 lines not on this page · raw message

tools/testing/selftests/powerpc/mce/vas-api.h new file +1 -0
new file mode 120000
index 000000000000..1455c1bcd351
@@ -0,0 +1 @@
+../../../../../arch/powerpc/include/uapi/asm/vas-api.h
\ No newline at end of file
Signature · 1 line
2.31.1
#0 lore raw

PATCH RESEND v3 1/3 powerpc/pseries: Parse control memory access error

Add support to parse and log control memory access error for pseries. These changes are made according to PAPR v2.11 10.3.2.2.12.

---
 arch/powerpc/platforms/pseries/ras.c | 36 ++++++++++++++++++++++++----
 1 file changed, 32 insertions(+), 4 deletions(-)
arch/powerpc/platforms/pseries/ras.c +32 -4
index 56092dccfdb8..e62a0ca2611a 100644
@@ -60,11 +60,17 @@ struct pseries_mc_errorlog {
 	 *      XX	2: Reserved.
 	 *        XXX	3: Type of UE error.
 	 *
-	 * For error_type != MC_ERROR_TYPE_UE
+	 * For error_type == MC_ERROR_TYPE_SLB/ERAT/TLB
 	 *   XXXXXXXX
 	 *   X		1: Effective address provided.
 	 *    XXXXX	5: Reserved.
 	 *         XX	2: Type of SLB/ERAT/TLB error.
+	 *
+	 * For error_type == MC_ERROR_TYPE_CTRL_MEM_ACCESS
+	 *   XXXXXXXX
+	 *   X		1: Error causing address provided.
+	 *    XXX	3: Type of error.
+	 *       XXXX	4: Reserved.
 	 */
 	u8	sub_err_type;
 	u8	reserved_1[6];
@@ -80,6 +86,7 @@ struct pseries_mc_errorlog {
 #define MC_ERROR_TYPE_TLB		0x04
 #define MC_ERROR_TYPE_D_CACHE		0x05
 #define MC_ERROR_TYPE_I_CACHE		0x07
+#define MC_ERROR_TYPE_CTRL_MEM_ACCESS	0x08
 
 /* RTAS pseries MCE error sub types */
 #define MC_ERROR_UE_INDETERMINATE		0
@@ -90,6 +97,7 @@ struct pseries_mc_errorlog {
 
 #define UE_EFFECTIVE_ADDR_PROVIDED		0x40
 #define UE_LOGICAL_ADDR_PROVIDED		0x20
+#define MC_EFFECTIVE_ADDR_PROVIDED		0x80
 
 #define MC_ERROR_SLB_PARITY		0
 #define MC_ERROR_SLB_MULTIHIT		1
@@ -103,6 +111,9 @@ struct pseries_mc_errorlog {
 #define MC_ERROR_TLB_MULTIHIT		2
 #define MC_ERROR_TLB_INDETERMINATE	3
 
+#define MC_ERROR_CTRL_MEM_ACCESS_PTABLE_WALK	0
+#define MC_ERROR_CTRL_MEM_ACCESS_OP_ACCESS	1
+
 static inline u8 rtas_mc_error_sub_type(const struct pseries_mc_errorlog *mlog)
 {
 	switch (mlog->error_type) {
@@ -112,6 +123,8 @@ static inline u8 rtas_mc_error_sub_type(const struct pseries_mc_errorlog *mlog)
 	case	MC_ERROR_TYPE_ERAT:
 	case	MC_ERROR_TYPE_TLB:
 		return (mlog->sub_err_type & 0x03);
+	case	MC_ERROR_TYPE_CTRL_MEM_ACCESS:
+		return (mlog->sub_err_type & 0x70) >> 4;
 	default:
 		return 0;
 	}
@@ -656,7 +669,7 @@ static int mce_handle_err_virtmode(struct pt_regs *regs,
 			mce_err.u.slb_error_type = MCE_SLB_ERROR_INDETERMINATE;
 			break;
 		}
-		if (mce_log->sub_err_type & 0x80)
+		if (mce_log->sub_err_type & MC_EFFECTIVE_ADDR_PROVIDED)
 			eaddr = be64_to_cpu(mce_log->effective_address);
 		break;
 	case MC_ERROR_TYPE_ERAT:
@@ -673,7 +686,7 @@ static int mce_handle_err_virtmode(struct pt_regs *regs,
 			mce_err.u.erat_error_type = MCE_ERAT_ERROR_INDETERMINATE;
 			break;
 		}
-		if (mce_log->sub_err_type & 0x80)
+		if (mce_log->sub_err_type & MC_EFFECTIVE_ADDR_PROVIDED)
 			eaddr = be64_to_cpu(mce_log->effective_address);
 		break;
 	case MC_ERROR_TYPE_TLB:
@@ -690,7 +703,7 @@ static int mce_handle_err_virtmode(struct pt_regs *regs,
 			mce_err.u.tlb_error_type = MCE_TLB_ERROR_INDETERMINATE;
 			break;
 		}
-		if (mce_log->sub_err_type & 0x80)
+		if (mce_log->sub_err_type & MC_EFFECTIVE_ADDR_PROVIDED)
 			eaddr = be64_to_cpu(mce_log->effective_address);
 		break;
 	case MC_ERROR_TYPE_D_CACHE:
@@ -699,6 +712,21 @@ static int mce_handle_err_virtmode(struct pt_regs *regs,
 	case MC_ERROR_TYPE_I_CACHE:
 		mce_err.error_type = MCE_ERROR_TYPE_ICACHE;
 		break;
+	case MC_ERROR_TYPE_CTRL_MEM_ACCESS:
+		mce_err.error_type = MCE_ERROR_TYPE_RA;
+		switch (err_sub_type) {
+		case MC_ERROR_CTRL_MEM_ACCESS_PTABLE_WALK:
+			mce_err.u.ra_error_type =
+				MCE_RA_ERROR_PAGE_TABLE_WALK_LOAD_STORE_FOREIGN;
+			break;
+		case MC_ERROR_CTRL_MEM_ACCESS_OP_ACCESS:
+			mce_err.u.ra_error_type =
+				MCE_RA_ERROR_LOAD_STORE_FOREIGN;
+			break;
+		}
+		if (mce_log->sub_err_type & MC_EFFECTIVE_ADDR_PROVIDED)
+			eaddr = be64_to_cpu(mce_log->effective_address);
+		break;
 	case MC_ERROR_TYPE_UNKNOWN:
 	default:
 		mce_err.error_type = MCE_ERROR_TYPE_UNKNOWN;
Signature · 1 line
2.31.1
#2 lore raw

PATCH RESEND v3 3/3 powerpc/mce: Modify the real address error logging messages

To avoid ambiguity, modify the strings in real address error logging messages to "foreign/control memory" from "foreign", Since the error discriptions in P9 user manual and P10 user manual are different for same type of errors.

P9 User Manual for MCE:
DSISR:59 Host real address to foreign space during translation. DSISR:60 Host real address to foreign space on a load or store
access.

P10 User Manual for MCE:
DSISR:59 D-side tablewalk used a host real address in the
control memory address range.
DSISR:60 D-side operand access to control memory address space.

---
 arch/powerpc/kernel/mce.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
arch/powerpc/kernel/mce.c +4 -4
index fd829f7f25a4..55ccc651d1b0 100644
@@ -401,14 +401,14 @@ void machine_check_print_event_info(struct machine_check_event *evt,
 	static const char *mc_ra_types[] = {
 		"Indeterminate",
 		"Instruction fetch (bad)",
-		"Instruction fetch (foreign)",
+		"Instruction fetch (foreign/control memory)",
 		"Page table walk ifetch (bad)",
-		"Page table walk ifetch (foreign)",
+		"Page table walk ifetch (foreign/control memory)",
 		"Load (bad)",
 		"Store (bad)",
 		"Page table walk Load/Store (bad)",
-		"Page table walk Load/Store (foreign)",
-		"Load/Store (foreign)",
+		"Page table walk Load/Store (foreign/control memory)",
+		"Load/Store (foreign/control memory)",
 	};
 	static const char *mc_link_types[] = {
 		"Indeterminate",
Signature · 1 line
2.31.1
author
#3 lore raw
In reply to Ganesh Goudar
Quoted 11 lines · Ganesh Goudar

Add support to parse and log control memory access error for pseries. These changes are made according to PAPR v2.11 10.3.2.2.12.

---
  arch/powerpc/platforms/pseries/ras.c | 36 ++++++++++++++++++++++++----
  1 file changed, 32 insertions(+), 4 deletions(-)
  		mce_err.error_type = MCE_ERROR_TYPE_UNKNOWN;

Hi mpe, Any comments on this patch series?

#4 lore raw
In reply to Ganesh Goudar
Quoted 5 lines · Ganesh Goudar

Add support to parse and log control memory access error for pseries. These changes are made according to PAPR v2.11 10.3.2.2.12.

Applied to powerpc/next.

[1/3] powerpc/pseries: Parse control memory access error

      https://git.kernel.org/powerpc/c/0f54bddefe7f5e4c98bea6f945ebdf85d1c44117
[2/3] selftests/powerpc: Add test for real address error handling
      https://git.kernel.org/powerpc/c/0f4ef8a3bf784f250abc7d0155ae4e9fa22d8210
[3/3] powerpc/mce: Modify the real address error logging messages
      https://git.kernel.org/powerpc/c/0a182611d149b5b747014fbb230ec35b20a45c86

cheers