Skip to contentSkip to conversation

configs/mx6sx_udoo: Bump U-Boot and kernel

PATCH Applied Fabio Estevam 2 participants 2 messages Jan 10, 2022 – Jan 11, 2022

lore
Share & tools
lore

Fabio Estevam

author
#0 lore raw

PATCH 1/1 configs/mx6sx_udoo: Bump U-Boot and kernel

Bump U-Boot to 2022.01 and kernel to 5.15.13.

After the conversion to U-Boot device model, the SD card is device '1', so change the boot script accordingly.

Signed-off-by Fabio Estevam <[email protected]>
---
 board/udoo/common/boot.scr.txt   | 6 +++---
 configs/mx6sx_udoo_neo_defconfig | 8 ++++----
 2 files changed, 7 insertions(+), 7 deletions(-)
board/udoo/common/boot.scr.txt +3 -3
index 7acceed0fb29..7a7d756c3c71 100644
@@ -1,7 +1,7 @@
-setenv finduuid "part uuid mmc 0:1 uuid"
+setenv finduuid "part uuid mmc 1:1 uuid"
 run finduuid
 run findfdt
 setenv bootargs "console=${console} root=PARTUUID=${uuid} rootwait rootfstype=ext4"
-load mmc 0:1 ${fdt_addr} boot/${fdtfile}
-load mmc 0:1 ${loadaddr} boot/zImage
+load mmc 1:1 ${fdt_addr} boot/${fdtfile}
+load mmc 1:1 ${loadaddr} boot/zImage
 bootz ${loadaddr} - ${fdt_addr}
configs/mx6sx_udoo_neo_defconfig +4 -4
index 2bdcade25296..3e1dc33bd4ba 100644
@@ -3,8 +3,8 @@ BR2_cortex_a9=y
 BR2_ARM_ENABLE_NEON=y
 BR2_ARM_ENABLE_VFP=y
 BR2_ARM_FPU_VFPV3=y
-# Linux headers same as kernel, a 5.8 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_8=y
+# Linux headers same as kernel, a 5.15 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/udoo/common/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh"
 BR2_TARGET_ROOTFS_EXT2=y

@@ -12,13 +12,13 @@ BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="udoo_neo"
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.10"
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.01"
 BR2_TARGET_UBOOT_FORMAT_IMG=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="SPL"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.8.13"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.13"
 BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6sx-udoo-neo-basic imx6sx-udoo-neo-full imx6sx-udoo-neo-extended"
Signature · 6 lines
2.25.1

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Applied
#1 lore raw
Quoted 10 lines · On Mon, 10 Jan 2022 17:18:10 -0300 Fabio Estevam <[email protected]> wrote:

Bump U-Boot to 2022.01 and kernel to 5.15.13.

After the conversion to U-Boot device model, the SD card is device '1', so change the boot script accordingly.

Signed-off-by Fabio Estevam <[email protected]>
---
 board/udoo/common/boot.scr.txt   | 6 +++---
 configs/mx6sx_udoo_neo_defconfig | 8 ++++----
 2 files changed, 7 insertions(+), 7 deletions(-)

Applied to master, thanks.

Thomas

Signature · 7 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot