arm: dts: rz-g2-beacon-u-boot: Enable pinmux for QSPI
PATCH 1/1 arm: dts: rz-g2-beacon-u-boot: Enable pinmux for QSPI
When booting from QSPI, the boot ROM appears to mux the QSPI pins, but it's not guaranteed to be setup when booting from eMMC. Fix this by explicitly configuring the pinmux.
Signed-off-by Adam Ford <[email protected]>
arch/arm/dts/rz-g2-beacon-u-boot.dtsi +9 -0
@@ -33,12 +33,21 @@ u-boot,dm-pre-reloc; }; +&pfc { + qspi_pins: qspi { + groups = "qspi_ctrl", "qspi_data4"; + function = "qspi"; + }; +}; + &prr { u-boot,dm-pre-reloc; }; &rpc { compatible = "renesas,rcar-gen3-rpc"; + pinctrl-0 = <&qspi_pins>; + pinctrl-names = "default"; num-cs = <1>; spi-max-frequency = <40000000>; #address-cells = <1>;
Signature · 1 line
2.32.0