hwmon: powr1220: add powr104 support
v2 cover hwmon: powr1220: add powr104 support
From: Michael Shych <[email protected]>
This patchset adds support for Lattice POWR1014 power management device
Michael Shych (2):
hwmon: powr1220: Upgrade driver to support hwmon info infrastructure
hwmon: powr1220: Add support for Lattice's POWR1014 power manager IC
drivers/hwmon/powr1220.c | 241 ++++++++++++++++++++++------------------------- 1 file changed, 115 insertions(+), 126 deletions(-)
Signature · 1 line
2.14.1
PATCH v2 1/2 hwmon: powr1220: Upgrade driver to support hwmon info infrastructure
From: Michael Shych <[email protected]>
Reduce code by using devm_hwmon_device_register_with_groups() API by devm_hwmon_device_register_with_info() API.
The motivation is to reduce code and to allow easy support for similar devices by the same driver.
--- drivers/hwmon/powr1220.c | 216 +++++++++++++++++++++-------------------------- 1 file changed, 95 insertions(+), 121 deletions(-)
drivers/hwmon/powr1220.c +95 -121
@@ -111,7 +111,7 @@ static int powr1220_read_adc(struct device *dev, int ch_num)mutex_lock (&data->update_lock);if (time_after (jiffies, data->adc_last_updated[ch_num] +HZ ) || - !data->adc_valid[ch_num]) { + !data->adc_valid[ch_num]) {/* * figure out if we need to use the attenuator for * high inputs or inputs that we don't yet have a measurement
@@ -119,12 +119,12 @@ static int powr1220_read_adc(struct device *dev, int ch_num)* max reading. */ if (data->adc_maxes[ch_num] >ADC_MAX_LOW_MEASUREMENT_MV || - data->adc_maxes[ch_num] ==0 ) + data->adc_maxes[ch_num] ==0 ) adc_range =1 <<4 ;/* set the attenuator and mux */ result =i2c_smbus_write_byte_data (data->client,ADC_MUX , - adc_range | ch_num); + adc_range | ch_num);if (result) goto exit;
@@ -132,7 +132,7 @@ static int powr1220_read_adc(struct device *dev, int ch_num)* wait at least Tconvert time (200 us) for the * conversion to complete */ -udelay (200 ); +usleep (200 );/* get the ADC reading */ result =i2c_smbus_read_byte_data (data->client,ADC_VALUE_LOW );
@@ -163,139 +163,112 @@ static int powr1220_read_adc(struct device *dev, int ch_num) exit:mutex_unlock (&data->update_lock); -return result; } -/* Shows the voltage associated with the specified ADC channel */ -static ssize_t powr1220_voltage_show (struct device *dev, -struct device_attribute *dev_attr, -char *buf) +static umode_t +powr1220_is_visible (const void *data,enum hwmon_sensor_types type,u32 + attr,int channel) { -struct sensor_device_attribute *attr =to_sensor_dev_attr (dev_attr); -int adc_val =powr1220_read_adc (dev, attr->index); - -if (adc_val <0 ) -return adc_val; +switch (type) { +case hwmon_in: +switch (attr) { +case hwmon_in_input: +case hwmon_in_highest: +case hwmon_in_label: +return 0444 ; +default : +break ; + } + +default : +break ; + } -return sprintf (buf,"%d\n" , adc_val); +return 0 ; } -/* Shows the maximum setting associated with the specified ADC channel */ -static ssize_t powr1220_max_show (struct device *dev, -struct device_attribute *dev_attr,char *buf) +static int +powr1220_read_string (struct device *dev,enum hwmon_sensor_types type,u32 attr, +int channel,const char **str) { -struct sensor_device_attribute *attr =to_sensor_dev_attr (dev_attr); -struct powr1220_data *data =dev_get_drvdata (dev); +switch (type) { +case hwmon_in: +switch (attr) { +case hwmon_in_label: + *str = input_names[channel]; +return 0 ; +default : +return -EOPNOTSUPP ; + } +break ; +default : +return -EOPNOTSUPP ; + } -return sprintf (buf,"%d\n" , data->adc_maxes[attr->index]); +return -EOPNOTSUPP ; } -/* Shows the label associated with the specified ADC channel */ -static ssize_t powr1220_label_show (struct device *dev, -struct device_attribute *dev_attr, -char *buf) +static int +powr1220_read (struct device *dev,enum hwmon_sensor_types type,u32 + attr,int channel,long *val) { -struct sensor_device_attribute *attr =to_sensor_dev_attr (dev_attr); +struct powr1220_data *data =dev_get_drvdata (dev); +int ret; + +switch (type) { +case hwmon_in: +switch (attr) { +case hwmon_in_input: + ret =powr1220_read_adc (dev, channel); +if (ret <0 ) +return ret; + *val = ret; +break ; +case hwmon_in_highest: + *val = data->adc_maxes[channel]; +break ; +default : +return -EOPNOTSUPP ; + } +break ; +default : +return -EOPNOTSUPP ; + } -return sprintf (buf,"%s\n" , input_names[attr->index]); +return 0 ; } -static SENSOR_DEVICE_ATTR_RO(in0_input, powr1220_voltage, VMON1); -static SENSOR_DEVICE_ATTR_RO(in1_input, powr1220_voltage, VMON2); -static SENSOR_DEVICE_ATTR_RO(in2_input, powr1220_voltage, VMON3); -static SENSOR_DEVICE_ATTR_RO(in3_input, powr1220_voltage, VMON4); -static SENSOR_DEVICE_ATTR_RO(in4_input, powr1220_voltage, VMON5); -static SENSOR_DEVICE_ATTR_RO(in5_input, powr1220_voltage, VMON6); -static SENSOR_DEVICE_ATTR_RO(in6_input, powr1220_voltage, VMON7); -static SENSOR_DEVICE_ATTR_RO(in7_input, powr1220_voltage, VMON8); -static SENSOR_DEVICE_ATTR_RO(in8_input, powr1220_voltage, VMON9); -static SENSOR_DEVICE_ATTR_RO(in9_input, powr1220_voltage, VMON10); -static SENSOR_DEVICE_ATTR_RO(in10_input, powr1220_voltage, VMON11); -static SENSOR_DEVICE_ATTR_RO(in11_input, powr1220_voltage, VMON12); -static SENSOR_DEVICE_ATTR_RO(in12_input, powr1220_voltage, VCCA); -static SENSOR_DEVICE_ATTR_RO(in13_input, powr1220_voltage, VCCINP); - -static SENSOR_DEVICE_ATTR_RO(in0_highest, powr1220_max, VMON1); -static SENSOR_DEVICE_ATTR_RO(in1_highest, powr1220_max, VMON2); -static SENSOR_DEVICE_ATTR_RO(in2_highest, powr1220_max, VMON3); -static SENSOR_DEVICE_ATTR_RO(in3_highest, powr1220_max, VMON4); -static SENSOR_DEVICE_ATTR_RO(in4_highest, powr1220_max, VMON5); -static SENSOR_DEVICE_ATTR_RO(in5_highest, powr1220_max, VMON6); -static SENSOR_DEVICE_ATTR_RO(in6_highest, powr1220_max, VMON7); -static SENSOR_DEVICE_ATTR_RO(in7_highest, powr1220_max, VMON8); -static SENSOR_DEVICE_ATTR_RO(in8_highest, powr1220_max, VMON9); -static SENSOR_DEVICE_ATTR_RO(in9_highest, powr1220_max, VMON10); -static SENSOR_DEVICE_ATTR_RO(in10_highest, powr1220_max, VMON11); -static SENSOR_DEVICE_ATTR_RO(in11_highest, powr1220_max, VMON12); -static SENSOR_DEVICE_ATTR_RO(in12_highest, powr1220_max, VCCA); -static SENSOR_DEVICE_ATTR_RO(in13_highest, powr1220_max, VCCINP); - -static SENSOR_DEVICE_ATTR_RO(in0_label, powr1220_label, VMON1); -static SENSOR_DEVICE_ATTR_RO(in1_label, powr1220_label, VMON2); -static SENSOR_DEVICE_ATTR_RO(in2_label, powr1220_label, VMON3); -static SENSOR_DEVICE_ATTR_RO(in3_label, powr1220_label, VMON4); -static SENSOR_DEVICE_ATTR_RO(in4_label, powr1220_label, VMON5); -static SENSOR_DEVICE_ATTR_RO(in5_label, powr1220_label, VMON6); -static SENSOR_DEVICE_ATTR_RO(in6_label, powr1220_label, VMON7); -static SENSOR_DEVICE_ATTR_RO(in7_label, powr1220_label, VMON8); -static SENSOR_DEVICE_ATTR_RO(in8_label, powr1220_label, VMON9); -static SENSOR_DEVICE_ATTR_RO(in9_label, powr1220_label, VMON10); -static SENSOR_DEVICE_ATTR_RO(in10_label, powr1220_label, VMON11); -static SENSOR_DEVICE_ATTR_RO(in11_label, powr1220_label, VMON12); -static SENSOR_DEVICE_ATTR_RO(in12_label, powr1220_label, VCCA); -static SENSOR_DEVICE_ATTR_RO(in13_label, powr1220_label, VCCINP); - -static struct attribute *powr1220_attrs[] = { - &sensor_dev_attr_in0_input.dev_attr.attr, - &sensor_dev_attr_in1_input.dev_attr.attr, - &sensor_dev_attr_in2_input.dev_attr.attr, - &sensor_dev_attr_in3_input.dev_attr.attr, - &sensor_dev_attr_in4_input.dev_attr.attr, - &sensor_dev_attr_in5_input.dev_attr.attr, - &sensor_dev_attr_in6_input.dev_attr.attr, - &sensor_dev_attr_in7_input.dev_attr.attr, - &sensor_dev_attr_in8_input.dev_attr.attr, - &sensor_dev_attr_in9_input.dev_attr.attr, - &sensor_dev_attr_in10_input.dev_attr.attr, - &sensor_dev_attr_in11_input.dev_attr.attr, - &sensor_dev_attr_in12_input.dev_attr.attr, - &sensor_dev_attr_in13_input.dev_attr.attr, - - &sensor_dev_attr_in0_highest.dev_attr.attr, - &sensor_dev_attr_in1_highest.dev_attr.attr, - &sensor_dev_attr_in2_highest.dev_attr.attr, - &sensor_dev_attr_in3_highest.dev_attr.attr, - &sensor_dev_attr_in4_highest.dev_attr.attr, - &sensor_dev_attr_in5_highest.dev_attr.attr, - &sensor_dev_attr_in6_highest.dev_attr.attr, - &sensor_dev_attr_in7_highest.dev_attr.attr, - &sensor_dev_attr_in8_highest.dev_attr.attr, - &sensor_dev_attr_in9_highest.dev_attr.attr, - &sensor_dev_attr_in10_highest.dev_attr.attr, - &sensor_dev_attr_in11_highest.dev_attr.attr, - &sensor_dev_attr_in12_highest.dev_attr.attr, - &sensor_dev_attr_in13_highest.dev_attr.attr, - - &sensor_dev_attr_in0_label.dev_attr.attr, - &sensor_dev_attr_in1_label.dev_attr.attr, - &sensor_dev_attr_in2_label.dev_attr.attr, - &sensor_dev_attr_in3_label.dev_attr.attr, - &sensor_dev_attr_in4_label.dev_attr.attr, - &sensor_dev_attr_in5_label.dev_attr.attr, - &sensor_dev_attr_in6_label.dev_attr.attr, - &sensor_dev_attr_in7_label.dev_attr.attr, - &sensor_dev_attr_in8_label.dev_attr.attr, - &sensor_dev_attr_in9_label.dev_attr.attr, - &sensor_dev_attr_in10_label.dev_attr.attr, - &sensor_dev_attr_in11_label.dev_attr.attr, - &sensor_dev_attr_in12_label.dev_attr.attr, - &sensor_dev_attr_in13_label.dev_attr.attr, +static const struct hwmon_channel_info *powr1220_info[] = { +HWMON_CHANNEL_INFO (in, +HWMON_I_INPUT |HWMON_I_HIGHEST |HWMON_I_LABEL , +HWMON_I_INPUT |HWMON_I_HIGHEST |HWMON_I_LABEL , +HWMON_I_INPUT |HWMON_I_HIGHEST |HWMON_I_LABEL , +HWMON_I_INPUT |HWMON_I_HIGHEST |HWMON_I_LABEL , +HWMON_I_INPUT |HWMON_I_HIGHEST |HWMON_I_LABEL , +HWMON_I_INPUT |HWMON_I_HIGHEST |HWMON_I_LABEL , +HWMON_I_INPUT |HWMON_I_HIGHEST |HWMON_I_LABEL , +HWMON_I_INPUT |HWMON_I_HIGHEST |HWMON_I_LABEL , +HWMON_I_INPUT |HWMON_I_HIGHEST |HWMON_I_LABEL , +HWMON_I_INPUT |HWMON_I_HIGHEST |HWMON_I_LABEL , +HWMON_I_INPUT |HWMON_I_HIGHEST |HWMON_I_LABEL , +HWMON_I_INPUT |HWMON_I_HIGHEST |HWMON_I_LABEL , +HWMON_I_INPUT |HWMON_I_HIGHEST |HWMON_I_LABEL , +HWMON_I_INPUT |HWMON_I_HIGHEST |HWMON_I_LABEL ),NULL }; -ATTRIBUTE_GROUPS (powr1220); +static const struct hwmon_ops powr1220_hwmon_ops = { + .read = powr1220_read, + .read_string = powr1220_read_string, + .is_visible = powr1220_is_visible, +}; + +static const struct hwmon_chip_info powr1220_chip_info = { + .ops = &powr1220_hwmon_ops, + .info = powr1220_info, +};static int powr1220_probe (struct i2c_client *client) {
@@ -312,9 +285,10 @@ static int powr1220_probe(struct i2c_client *client)mutex_init (&data->update_lock); data->client = client; - hwmon_dev =devm_hwmon_device_register_with_groups (&client->dev, - client->name, data, powr1220_groups); - + hwmon_dev =devm_hwmon_device_register_with_info (&client->dev, + client->name, data, + &powr1220_chip_info, +NULL );return PTR_ERR_OR_ZERO (hwmon_dev); }
Signature · 1 line
2.14.1
PATCH v2 2/2 hwmon: powr1220: Add support for Lattice's POWR1014 power manager IC
In reply to [email protected]From: Michael Shych <[email protected]>
This patch adds support for Lattice's POWR1014 power manager IC. Read access to all the ADCs on the chip are supported through the "hwmon" "sysfs" files.
The main difference of POWR1014 compared to POWR1220 is amount of VMON input lines: 10 on POWR1014 and 12 lines on POWR1220.
Extend wait time for conversion to complete, since for POWR1014 it could be longer.
---v1->v2
Fix added by Michael: Fix incorrect device id.
--- drivers/hwmon/powr1220.c | 27 +++++++++++++++++++++------ 1 file changed, 21 insertions(+), 6 deletions(-)
drivers/hwmon/powr1220.c +21 -6
@@ -22,6 +22,8 @@#define ADC_STEP_MV 2#define ADC_MAX_LOW_MEASUREMENT_MV 2000 +enum powr1xxx_chips { powr1220, powr1014 }; +enum powr1220_regs {VMON_STATUS0 ,VMON_STATUS1 ,
@@ -74,6 +76,7 @@ enum powr1220_adc_values {struct powr1220_data {struct i2c_client *client;struct mutex update_lock; +u8 max_channels;bool adc_valid[MAX_POWR1220_ADC_VALUES ];/* the next value is in jiffies */ unsigned long adc_last_updated[MAX_POWR1220_ADC_VALUES ];
@@ -128,11 +131,8 @@ static int powr1220_read_adc(struct device *dev, int ch_num)if (result) goto exit; -/* -* wait at least Tconvert time (200 us) for the -* conversion to complete -*/ -usleep (200 ); +/* wait Tconvert time (200us - 400us) for the conversion to complete */ +usleep_range (200 ,400 );/* get the ADC reading */ result =i2c_smbus_read_byte_data (data->client,ADC_VALUE_LOW );
@@ -170,6 +170,9 @@ static umode_t powr1220_is_visible(const void *data, enum hwmon_sensor_types type, u32 attr, int channel) { + if (((struct powr1220_data *)data)->max_channels <= channel) + return 0; + switch (type) { case hwmon_in: switch (attr) {
@@ -270,6 +273,8 @@ static const struct hwmon_chip_info powr1220_chip_info = { .info = powr1220_info, }; +static const struct i2c_device_id powr1220_ids[]; +static int powr1220_probe (struct i2c_client *client) {struct powr1220_data *data;
@@ -282,6 +287,15 @@ static int powr1220_probe(struct i2c_client *client)if (!data)return -ENOMEM ; +switch (i2c_match_id (powr1220_ids, client)->driver_data) { +case powr1014: + data->max_channels =10 ; +break ; +default : + data->max_channels =12 ; +break ; + } +mutex_init (&data->update_lock); data->client = client;
@@ -293,7 +307,8 @@ static int powr1220_probe(struct i2c_client *client) }static const struct i2c_device_id powr1220_ids[] = { - {"powr1220" ,0 , }, + {"powr1220" , powr1220, }, + {"powr1014" , powr1014, }, { } };
Signature · 1 line
2.14.1
Guenter Roeck
maintainerRe: [PATCH v2 2/2] hwmon: powr1220: Add support for Lattice's POWR1014 power manager IC
Quoted 6 lines · On 1/11/22 9:32 AM, [email protected] wrote:
From: Michael Shych <[email protected]>
This patch adds support for Lattice's POWR1014 power manager IC. Read access to all the ADCs on the chip are supported through the "hwmon" "sysfs" files.
Quoted 6 lines
The main difference of POWR1014 compared to POWR1220 is amount of VMON input lines: 10 on POWR1014 and 12 lines on POWR1220.
Extend wait time for conversion to complete, since for POWR1014 it could be longer.
That is not correct, according to the POWR1014 datasheet, and the change is wrong anyway. More on that see below.
Quoted 14 lines
Signed-off-by Michael Shych <[email protected]>Reviewed-by Vadim Pasternak <[email protected]>---
v1->v2
Fix added by Michael: Fix incorrect device id.--- drivers/hwmon/powr1220.c | 27 +++++++++++++++++++++------ 1 file changed, 21 insertions(+), 6 deletions(-)drivers/hwmon/powr1220.c +0
-0
drivers/hwmon/powr1220.c line 25
Quoted 4 lines
drivers/hwmon/powr1220.c +1
-0@@ -22,6 +22,8 @@#define ADC_STEP_MV 2#define ADC_MAX_LOW_MEASUREMENT_MV 2000 +enum powr1xxx_chips { powr1220, powr1014 };
Please put these into (alpha)numberic order, ie powr1014 first. Same everywhere below.
Quoted 13 lines
drivers/hwmon/powr1220.c +2
-0+enum powr1220_regs {VMON_STATUS0 ,VMON_STATUS1 ,@@ -74,6 +76,7 @@ enum powr1220_adc_values {struct powr1220_data {struct i2c_client *client;struct mutex update_lock; +u8 max_channels;bool adc_valid[MAX_POWR1220_ADC_VALUES ];/* the next value is in jiffies */ unsigned long adc_last_updated[MAX_POWR1220_ADC_VALUES ];
drivers/hwmon/powr1220.c static int powr1220_read_adc(struct device *dev, int ch_num) · line 135
Quoted 10 lines
drivers/hwmon/powr1220.c +2
-5@@ -128,11 +131,8 @@ static int powr1220_read_adc(struct device *dev, int ch_num)if (result) goto exit; -/* -* wait at least Tconvert time (200 us) for the -* conversion to complete -*/ -usleep (200 ); +/* wait Tconvert time (200us - 400us) for the conversion to complete */ +usleep_range (200 ,400 );
This is confusing. I don't mind using usleep_range(), but usleep_range means that it is the kernel's choice how long to wait, and it may return after 200uS. If the chip specification states that the conversion may take up to 400uS to complete, the above may return before the conversion is complete.
So please clarify what the chip actually specifies. If the conversion time for POWR1014 can indeed be 400uS but is only 200uS for POWR1220, the minimum sleep time would have to be 400uS. If the above is just a personal preference change to relax sleep time, please make it a separate patch.
Follow-up: I looked up the datasheets. The maximum conversion time for POWR1014 is 100uS, and the maximum conversion time for POWR1220 is 200uS. The above really doesn't make sense in this context. Tconvert is never "200us - 400us" for any of the supported chips. Please don't do that as part of an unrelated patch. If you want to relax wait time, please submit a separate patch that includes a rationale (and one that is correct and backed up by a datasheet).
drivers/hwmon/powr1220.c static umode_t · line 175
Quoted 10 lines
drivers/hwmon/powr1220.c +3
-0/* get the ADC reading */ result =i2c_smbus_read_byte_data (data->client,ADC_VALUE_LOW );@@ -170,6 +170,9 @@ static umode_t powr1220_is_visible(const void *data, enum hwmon_sensor_types type, u32 attr, int channel) { + if (((struct powr1220_data *)data)->max_channels <= channel) + return 0; +
I would prefer to have a separate variable for struct powr1220_data * here, and please don't use Joda programming. Something like
struct powr1220_data *data = _data; if (channel >= data->max_channels) return 0;
Quoted 39 lines
drivers/hwmon/powr1220.c +13
-1switch (type) {case hwmon_in:switch (attr) {@@ -270,6 +273,8 @@ static const struct hwmon_chip_info powr1220_chip_info = { .info = powr1220_info, }; +static const struct i2c_device_id powr1220_ids[]; +static int powr1220_probe (struct i2c_client *client) {struct powr1220_data *data;@@ -282,6 +287,15 @@ static int powr1220_probe(struct i2c_client *client)if (!data)return -ENOMEM ; +switch (i2c_match_id (powr1220_ids, client)->driver_data) { +case powr1014: + data->max_channels =10 ; +break ; +default : + data->max_channels =12 ; +break ; + } +mutex_init (&data->update_lock); data->client = client;@@ -293,7 +307,8 @@ static int powr1220_probe(struct i2c_client *client) }static const struct i2c_device_id powr1220_ids[] = { - {"powr1220" ,0 , }, + {"powr1220" , powr1220, }, + {"powr1014" , powr1014, }, { } };
Guenter Roeck
maintainerRe: [PATCH v2 1/2] hwmon: powr1220: Upgrade driver to support hwmon info infrastructure
In reply to [email protected]Quoted 9 lines · On Tue, Jan 11, 2022 at 07:32:38PM +0200, [email protected] wrote:
From: Michael Shych <[email protected]>
Reduce code by using
devm_hwmon_device_register_with_groups()API bydevm_hwmon_device_register_with_info()API.
The motivation is to reduce code and to allow easy support for similar devices by the same driver.Signed-off-by Michael Shych <[email protected]>Reviewed-by Vadim Pasternak <[email protected]>
There are vaious unrelated changes in this patch: Multi-line alignment changes, and udelay() -> usleep(). Especially tyhe latter may introduce a significant additional delay; it often results in long sleep times (the kernel may sleep as long as it wants). This can have significant performance impact. It would probably be much better to use usleep_range() since that provides an upper bound for the sleep time.
Please split unrelated changes into separate patch(es).
Thanks,
Guenter
Quoted 282 lines
--- drivers/hwmon/powr1220.c | 216 +++++++++++++++++++++-------------------------- 1 file changed, 95 insertions(+), 121 deletions(-)drivers/hwmon/powr1220.c +95
-121@@ -111,7 +111,7 @@ static int powr1220_read_adc(struct device *dev, int ch_num)mutex_lock (&data->update_lock);if (time_after (jiffies, data->adc_last_updated[ch_num] +HZ ) || - !data->adc_valid[ch_num]) { + !data->adc_valid[ch_num]) {/* * figure out if we need to use the attenuator for * high inputs or inputs that we don't yet have a measurement @@ -119,12 +119,12 @@ static int powr1220_read_adc(struct device *dev, int ch_num)* max reading. */ if (data->adc_maxes[ch_num] >ADC_MAX_LOW_MEASUREMENT_MV || - data->adc_maxes[ch_num] ==0 ) + data->adc_maxes[ch_num] ==0 ) adc_range =1 <<4 ;/* set the attenuator and mux */ result =i2c_smbus_write_byte_data (data->client,ADC_MUX , - adc_range | ch_num); + adc_range | ch_num);if (result) goto exit;@@ -132,7 +132,7 @@ static int powr1220_read_adc(struct device *dev, int ch_num)* wait at least Tconvert time (200 us) for the * conversion to complete */ -udelay (200 ); +usleep (200 );/* get the ADC reading */ result =i2c_smbus_read_byte_data (data->client,ADC_VALUE_LOW );@@ -163,139 +163,112 @@ static int powr1220_read_adc(struct device *dev, int ch_num) exit:mutex_unlock (&data->update_lock); -return result; } -/* Shows the voltage associated with the specified ADC channel */ -static ssize_t powr1220_voltage_show (struct device *dev, -struct device_attribute *dev_attr, -char *buf) +static umode_t +powr1220_is_visible (const void *data,enum hwmon_sensor_types type,u32 + attr,int channel) { -struct sensor_device_attribute *attr =to_sensor_dev_attr (dev_attr); -int adc_val =powr1220_read_adc (dev, attr->index); - -if (adc_val <0 ) -return adc_val; +switch (type) { +case hwmon_in: +switch (attr) { +case hwmon_in_input: +case hwmon_in_highest: +case hwmon_in_label: +return 0444 ; +default : +break ; + } + +default : +break ; + } -return sprintf (buf,"%d\n" , adc_val); +return 0 ; } -/* Shows the maximum setting associated with the specified ADC channel */ -static ssize_t powr1220_max_show (struct device *dev, -struct device_attribute *dev_attr,char *buf) +static int +powr1220_read_string (struct device *dev,enum hwmon_sensor_types type,u32 attr, +int channel,const char **str) { -struct sensor_device_attribute *attr =to_sensor_dev_attr (dev_attr); -struct powr1220_data *data =dev_get_drvdata (dev); +switch (type) { +case hwmon_in: +switch (attr) { +case hwmon_in_label: + *str = input_names[channel]; +return 0 ; +default : +return -EOPNOTSUPP ; + } +break ; +default : +return -EOPNOTSUPP ; + } -return sprintf (buf,"%d\n" , data->adc_maxes[attr->index]); +return -EOPNOTSUPP ; } -/* Shows the label associated with the specified ADC channel */ -static ssize_t powr1220_label_show (struct device *dev, -struct device_attribute *dev_attr, -char *buf) +static int +powr1220_read (struct device *dev,enum hwmon_sensor_types type,u32 + attr,int channel,long *val) { -struct sensor_device_attribute *attr =to_sensor_dev_attr (dev_attr); +struct powr1220_data *data =dev_get_drvdata (dev); +int ret; + +switch (type) { +case hwmon_in: +switch (attr) { +case hwmon_in_input: + ret =powr1220_read_adc (dev, channel); +if (ret <0 ) +return ret; + *val = ret; +break ; +case hwmon_in_highest: + *val = data->adc_maxes[channel]; +break ; +default : +return -EOPNOTSUPP ; + } +break ; +default : +return -EOPNOTSUPP ; + } -return sprintf (buf,"%s\n" , input_names[attr->index]); +return 0 ; } -static SENSOR_DEVICE_ATTR_RO(in0_input, powr1220_voltage, VMON1); -static SENSOR_DEVICE_ATTR_RO(in1_input, powr1220_voltage, VMON2); -static SENSOR_DEVICE_ATTR_RO(in2_input, powr1220_voltage, VMON3); -static SENSOR_DEVICE_ATTR_RO(in3_input, powr1220_voltage, VMON4); -static SENSOR_DEVICE_ATTR_RO(in4_input, powr1220_voltage, VMON5); -static SENSOR_DEVICE_ATTR_RO(in5_input, powr1220_voltage, VMON6); -static SENSOR_DEVICE_ATTR_RO(in6_input, powr1220_voltage, VMON7); -static SENSOR_DEVICE_ATTR_RO(in7_input, powr1220_voltage, VMON8); -static SENSOR_DEVICE_ATTR_RO(in8_input, powr1220_voltage, VMON9); -static SENSOR_DEVICE_ATTR_RO(in9_input, powr1220_voltage, VMON10); -static SENSOR_DEVICE_ATTR_RO(in10_input, powr1220_voltage, VMON11); -static SENSOR_DEVICE_ATTR_RO(in11_input, powr1220_voltage, VMON12); -static SENSOR_DEVICE_ATTR_RO(in12_input, powr1220_voltage, VCCA); -static SENSOR_DEVICE_ATTR_RO(in13_input, powr1220_voltage, VCCINP); - -static SENSOR_DEVICE_ATTR_RO(in0_highest, powr1220_max, VMON1); -static SENSOR_DEVICE_ATTR_RO(in1_highest, powr1220_max, VMON2); -static SENSOR_DEVICE_ATTR_RO(in2_highest, powr1220_max, VMON3); -static SENSOR_DEVICE_ATTR_RO(in3_highest, powr1220_max, VMON4); -static SENSOR_DEVICE_ATTR_RO(in4_highest, powr1220_max, VMON5); -static SENSOR_DEVICE_ATTR_RO(in5_highest, powr1220_max, VMON6); -static SENSOR_DEVICE_ATTR_RO(in6_highest, powr1220_max, VMON7); -static SENSOR_DEVICE_ATTR_RO(in7_highest, powr1220_max, VMON8); -static SENSOR_DEVICE_ATTR_RO(in8_highest, powr1220_max, VMON9); -static SENSOR_DEVICE_ATTR_RO(in9_highest, powr1220_max, VMON10); -static SENSOR_DEVICE_ATTR_RO(in10_highest, powr1220_max, VMON11); -static SENSOR_DEVICE_ATTR_RO(in11_highest, powr1220_max, VMON12); -static SENSOR_DEVICE_ATTR_RO(in12_highest, powr1220_max, VCCA); -static SENSOR_DEVICE_ATTR_RO(in13_highest, powr1220_max, VCCINP); - -static SENSOR_DEVICE_ATTR_RO(in0_label, powr1220_label, VMON1); -static SENSOR_DEVICE_ATTR_RO(in1_label, powr1220_label, VMON2); -static SENSOR_DEVICE_ATTR_RO(in2_label, powr1220_label, VMON3); -static SENSOR_DEVICE_ATTR_RO(in3_label, powr1220_label, VMON4); -static SENSOR_DEVICE_ATTR_RO(in4_label, powr1220_label, VMON5); -static SENSOR_DEVICE_ATTR_RO(in5_label, powr1220_label, VMON6); -static SENSOR_DEVICE_ATTR_RO(in6_label, powr1220_label, VMON7); -static SENSOR_DEVICE_ATTR_RO(in7_label, powr1220_label, VMON8); -static SENSOR_DEVICE_ATTR_RO(in8_label, powr1220_label, VMON9); -static SENSOR_DEVICE_ATTR_RO(in9_label, powr1220_label, VMON10); -static SENSOR_DEVICE_ATTR_RO(in10_label, powr1220_label, VMON11); -static SENSOR_DEVICE_ATTR_RO(in11_label, powr1220_label, VMON12); -static SENSOR_DEVICE_ATTR_RO(in12_label, powr1220_label, VCCA); -static SENSOR_DEVICE_ATTR_RO(in13_label, powr1220_label, VCCINP); - -static struct attribute *powr1220_attrs[] = { - &sensor_dev_attr_in0_input.dev_attr.attr, - &sensor_dev_attr_in1_input.dev_attr.attr, - &sensor_dev_attr_in2_input.dev_attr.attr, - &sensor_dev_attr_in3_input.dev_attr.attr, - &sensor_dev_attr_in4_input.dev_attr.attr, - &sensor_dev_attr_in5_input.dev_attr.attr, - &sensor_dev_attr_in6_input.dev_attr.attr, - &sensor_dev_attr_in7_input.dev_attr.attr, - &sensor_dev_attr_in8_input.dev_attr.attr, - &sensor_dev_attr_in9_input.dev_attr.attr, - &sensor_dev_attr_in10_input.dev_attr.attr, - &sensor_dev_attr_in11_input.dev_attr.attr, - &sensor_dev_attr_in12_input.dev_attr.attr, - &sensor_dev_attr_in13_input.dev_attr.attr, - - &sensor_dev_attr_in0_highest.dev_attr.attr, - &sensor_dev_attr_in1_highest.dev_attr.attr, - &sensor_dev_attr_in2_highest.dev_attr.attr, - &sensor_dev_attr_in3_highest.dev_attr.attr, - &sensor_dev_attr_in4_highest.dev_attr.attr, - &sensor_dev_attr_in5_highest.dev_attr.attr, - &sensor_dev_attr_in6_highest.dev_attr.attr, - &sensor_dev_attr_in7_highest.dev_attr.attr, - &sensor_dev_attr_in8_highest.dev_attr.attr, - &sensor_dev_attr_in9_highest.dev_attr.attr, - &sensor_dev_attr_in10_highest.dev_attr.attr, - &sensor_dev_attr_in11_highest.dev_attr.attr, - &sensor_dev_attr_in12_highest.dev_attr.attr, - &sensor_dev_attr_in13_highest.dev_attr.attr, - - &sensor_dev_attr_in0_label.dev_attr.attr, - &sensor_dev_attr_in1_label.dev_attr.attr, - &sensor_dev_attr_in2_label.dev_attr.attr, - &sensor_dev_attr_in3_label.dev_attr.attr, - &sensor_dev_attr_in4_label.dev_attr.attr, - &sensor_dev_attr_in5_label.dev_attr.attr, - &sensor_dev_attr_in6_label.dev_attr.attr, - &sensor_dev_attr_in7_label.dev_attr.attr, - &sensor_dev_attr_in8_label.dev_attr.attr, - &sensor_dev_attr_in9_label.dev_attr.attr, - &sensor_dev_attr_in10_label.dev_attr.attr, - &sensor_dev_attr_in11_label.dev_attr.attr, - &sensor_dev_attr_in12_label.dev_attr.attr, - &sensor_dev_attr_in13_label.dev_attr.attr, +static const struct hwmon_channel_info *powr1220_info[] = { +HWMON_CHANNEL_INFO (in, +HWMON_I_INPUT |HWMON_I_HIGHEST |HWMON_I_LABEL , +HWMON_I_INPUT |HWMON_I_HIGHEST |HWMON_I_LABEL , +HWMON_I_INPUT |HWMON_I_HIGHEST |HWMON_I_LABEL , +HWMON_I_INPUT |HWMON_I_HIGHEST |HWMON_I_LABEL , +HWMON_I_INPUT |HWMON_I_HIGHEST |HWMON_I_LABEL , +HWMON_I_INPUT |HWMON_I_HIGHEST |HWMON_I_LABEL , +HWMON_I_INPUT |HWMON_I_HIGHEST |HWMON_I_LABEL , +HWMON_I_INPUT |HWMON_I_HIGHEST |HWMON_I_LABEL , +HWMON_I_INPUT |HWMON_I_HIGHEST |HWMON_I_LABEL , +HWMON_I_INPUT |HWMON_I_HIGHEST |HWMON_I_LABEL , +HWMON_I_INPUT |HWMON_I_HIGHEST |HWMON_I_LABEL , +HWMON_I_INPUT |HWMON_I_HIGHEST |HWMON_I_LABEL , +HWMON_I_INPUT |HWMON_I_HIGHEST |HWMON_I_LABEL , +HWMON_I_INPUT |HWMON_I_HIGHEST |HWMON_I_LABEL ),NULL }; -ATTRIBUTE_GROUPS (powr1220); +static const struct hwmon_ops powr1220_hwmon_ops = { + .read = powr1220_read, + .read_string = powr1220_read_string, + .is_visible = powr1220_is_visible, +}; + +static const struct hwmon_chip_info powr1220_chip_info = { + .ops = &powr1220_hwmon_ops, + .info = powr1220_info, +};static int powr1220_probe (struct i2c_client *client) {@@ -312,9 +285,10 @@ static int powr1220_probe(struct i2c_client *client)mutex_init (&data->update_lock); data->client = client; - hwmon_dev =devm_hwmon_device_register_with_groups (&client->dev, - client->name, data, powr1220_groups); - + hwmon_dev =devm_hwmon_device_register_with_info (&client->dev, + client->name, data, + &powr1220_chip_info, +NULL );return PTR_ERR_OR_ZERO (hwmon_dev); }