arm-bsp/fvp-baser-aemv8r64: Fix PL011 and SP805 register sizes
PATCH 1/1 arm-bsp/fvp-baser-aemv8r64: Fix PL011 and SP805 register sizes
From: Peter Hoyes <[email protected]>
The Linux kernel expects the peripheral ID register to be just below the end of the address range, which for the PL011 and SP805 is at 0xFE0 not 0xFFE0, so set the size to 0x1000.
Issue-Id: SCM-3881
Signed-off-by Peter Hoyes <[email protected]>
Change-Id Iada28e8192d72b1647822c33d13deffe507043b5
--- .../files/fvp-baser-aemv8r64/fvp-baser-aemv8r64.dts | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
meta-arm-bsp/recipes-kernel/linux/files/fvp-baser-aemv8r64/fvp-baser-aemv8r64.dts +5 -5
@@ -111,7 +111,7 @@ uart@9c090000 { compatible = "arm,pl011", "arm,primecell"; - reg = <0x0 0x9c090000 0x0 0x10000>; + reg = <0x0 0x9c090000 0x0 0x1000>; interrupts = <0x0 5 0x4>; clocks = <&refclk24mhz>, <&refclk100mhz>; clock-names = "uartclk", "apb_pclk";
@@ -119,7 +119,7 @@ uart@9c0a0000 { compatible = "arm,pl011", "arm,primecell"; - reg = <0x0 0x9c0a0000 0x0 0x10000>; + reg = <0x0 0x9c0a0000 0x0 0x1000>; interrupts = <0x0 6 0x4>; clocks = <&refclk24mhz>, <&refclk100mhz>; clock-names = "uartclk", "apb_pclk";
@@ -127,7 +127,7 @@ uart@9c0b0000 { compatible = "arm,pl011", "arm,primecell"; - reg = <0x0 0x9c0b0000 0x0 0x10000>; + reg = <0x0 0x9c0b0000 0x0 0x1000>; interrupts = <0x0 7 0x4>; clocks = <&refclk24mhz>, <&refclk100mhz>; clock-names = "uartclk", "apb_pclk";
@@ -135,7 +135,7 @@ uart@9c0c0000 { compatible = "arm,pl011", "arm,primecell"; - reg = <0x0 0x9c0c0000 0x0 0x10000>; + reg = <0x0 0x9c0c0000 0x0 0x1000>; interrupts = <0x0 8 0x4>; clocks = <&refclk24mhz>, <&refclk100mhz>; clock-names = "uartclk", "apb_pclk";
@@ -143,7 +143,7 @@ wdt@9c0f0000 { compatible = "arm,sp805", "arm,primecell"; - reg = <0x0 0x9c0f0000 0x0 0x10000>; + reg = <0x0 0x9c0f0000 0x0 0x1000>; interrupts = <0x0 0 0x4>; clocks = <&refclk24mhz>, <&refclk100mhz>; clock-names = "wdog_clk", "apb_pclk";
Signature · 1 line
2.25.1
Jon Mason
AppliedQuoted 3 lines · Peter Hoyes
The Linux kernel expects the peripheral ID register to be just below the end of the address range, which for the PL011 and SP805 is at
0xFE0not0xFFE0, so set the size to0x1000.
Applied, thanks!
[1/1] arm-bsp/fvp-baser-aemv8r64: Fix PL011 and SP805 register sizes
commit: 3d38ee3e1106d18b3ba6a0cf0925718149cd7f05
Best regards,
Signature · 1 line
Jon Mason <[email protected]>