Skip to contentSkip to conversation

ksmbd: fix guest connection failure with nautilus

PATCH New Namjae Jeon 1 participant 1 message Jan 17, 2022

Subsystems (3)
lore
Share & tools
lore

Namjae Jeon

author maintainer
#0 lore raw

PATCH 1/1 ksmbd: fix guest connection failure with nautilus

MS-SMB2 describe session sign like the following. Session.SigningRequired MUST be set to TRUE under the following conditions:
- If the SMB2_NEGOTIATE_SIGNING_REQUIRED bit is set in the SecurityMode field of the client request.
- If the SMB2_SESSION_FLAG_IS_GUEST bit is not set in the SessionFlags field and Session.IsAnonymous is FALSE and either Connection.ShouldSign or global RequireMessageSigning is TRUE.

When trying guest account connection using nautilus, The login failure happened on session setup. ksmbd does not allow this connection when the user is a guest and the connection sign is set. Just do not set session sign instead of error response as described in the specification. And this change improves the guest connection in Nautilus.

Fixes e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc [email protected] # v5.15+
---
 fs/ksmbd/smb2pdu.c | 62 ++++++++++++++++++++++------------------------
 1 file changed, 29 insertions(+), 33 deletions(-)
fs/ksmbd/smb2pdu.c +29 -33
index 15f331dbe17a..1866c81c5c99 100644
@@ -1464,11 +1464,6 @@ static int ntlm_authenticate(struct ksmbd_work *work)
 	}
 
 	if (user_guest(sess->user)) {
-		if (conn->sign) {
-			ksmbd_debug(SMB, "Guest login not allowed when signing enabled\n");
-			return -EPERM;
-		}
-
 		rsp->SessionFlags = SMB2_SESSION_FLAG_IS_GUEST_LE;
 	} else {
 		struct authenticate_message *authblob;
@@ -1481,38 +1476,39 @@ static int ntlm_authenticate(struct ksmbd_work *work)
 			ksmbd_debug(SMB, "authentication failed\n");
 			return -EPERM;
 		}
+	}
 
-		/*
-		 * If session state is SMB2_SESSION_VALID, We can assume
-		 * that it is reauthentication. And the user/password
-		 * has been verified, so return it here.
-		 */
-		if (sess->state == SMB2_SESSION_VALID) {
-			if (conn->binding)
-				goto binding_session;
-			return 0;
-		}
+	/*
+	 * If session state is SMB2_SESSION_VALID, We can assume
+	 * that it is reauthentication. And the user/password
+	 * has been verified, so return it here.
+	 */
+	if (sess->state == SMB2_SESSION_VALID) {
+		if (conn->binding)
+			goto binding_session;
+		return 0;
+	}
 
-		if ((conn->sign || server_conf.enforced_signing) ||
-		    (req->SecurityMode & SMB2_NEGOTIATE_SIGNING_REQUIRED))
-			sess->sign = true;
+	if ((rsp->SessionFlags != SMB2_SESSION_FLAG_IS_GUEST_LE &&
+	     (conn->sign || server_conf.enforced_signing)) ||
+	    (req->SecurityMode & SMB2_NEGOTIATE_SIGNING_REQUIRED))
+		sess->sign = true;
 
-		if (smb3_encryption_negotiated(conn) &&
-		    !(req->Flags & SMB2_SESSION_REQ_FLAG_BINDING)) {
-			rc = conn->ops->generate_encryptionkey(sess);
-			if (rc) {
-				ksmbd_debug(SMB,
-					    "SMB3 encryption key generation failed\n");
-				return -EINVAL;
-			}
-			sess->enc = true;
-			rsp->SessionFlags = SMB2_SESSION_FLAG_ENCRYPT_DATA_LE;
-			/*
-			 * signing is disable if encryption is enable
-			 * on this session
-			 */
-			sess->sign = false;
+	if (smb3_encryption_negotiated(conn) &&
+			!(req->Flags & SMB2_SESSION_REQ_FLAG_BINDING)) {
+		rc = conn->ops->generate_encryptionkey(sess);
+		if (rc) {
+			ksmbd_debug(SMB,
+					"SMB3 encryption key generation failed\n");
+			return -EINVAL;
 		}
+		sess->enc = true;
+		rsp->SessionFlags = SMB2_SESSION_FLAG_ENCRYPT_DATA_LE;
+		/*
+		 * signing is disable if encryption is enable
+		 * on this session
+		 */
+		sess->sign = false;
 	}
 
 binding_session:
Signature · 1 line
2.25.1