security_flags.inc: don't default to PIE if image-prelink is enabled
PATCH 1/1 security_flags.inc: don't default to PIE if image-prelink is enabled
Since a prelinked rootfs is in conflict with PIE, don't attempt the latter if the image enables prelink.
--- meta/conf/distro/include/security_flags.inc | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
meta/conf/distro/include/security_flags.inc +1 -1
@@ -5,7 +5,7 @@ # From a Yocto Project perspective, this file is included and tested # in the DISTRO="poky" configuration. -GCCPIE ?= "--enable-default-pie" +GCCPIE ?= "${@bb.utils.contains('USER_CLASSES', 'image-prelink', '--disable-default-pie', '--enable-default-pie', d)}" # If static PIE is known to work well, GLIBCPIE="--enable-static-pie" can be set # _FORTIFY_SOURCE requires -O1 or higher, so disable in debug builds as they use
Signature · 1 line
2.25.1
I think we pretty much abandoned prelink at this point, are you using it and do you see the benefits?
Alex
Quoted 38 lines · On Thu, 20 Jan 2022 at 04:30, <[email protected]> wrote:
Since a prelinked rootfs is in conflict with PIE, don't attempt the latter if the image enables prelink.
--- meta/conf/distro/include/security_flags.inc | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)meta/conf/distro/include/security_flags.inc +1
-1@@ -5,7 +5,7 @@ # From a Yocto Project perspective, this file is included and tested # in the DISTRO="poky" configuration. -GCCPIE ?= "--enable-default-pie" +GCCPIE ?= "${@bb.utils.contains('USER_CLASSES', 'image-prelink','--disable-default-pie', '--enable-default-pie', d)}"
# If static PIE is known to work well, GLIBCPIE="--enable-static-pie" can
be set#
_FORTIFY_SOURCErequires -O1 or higher, so disable in debug builds as
they use
--
2.25.1-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group. View/Reply Online (#160749):
https://lists.openembedded.org/g/openembedded-core/message/160749
Mute This Topic: https://lists.openembedded.org/mt/88551948/1686489
Group Owner: [email protected]
Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [ [email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
Yes, we do use prelink. I think our use case primarily benefits from CoW memory savings, rather than load times. Of course, GCCPIE can be overridden in the distro layer, but seeing as image-prelink.bbclass still exists upstream, the default definition should support configurations that choose to enable it.
Quoted 45 lines · Alexander Kanavin
I think we pretty much abandoned prelink at this point, are you using it and do you see the benefits?
Alex
Quoted 38 lines · On Thu, 20 Jan 2022 at 04:30, <[email protected]> wrote:
Since a prelinked rootfs is in conflict with PIE, don't attempt the latter if the image enables prelink.
--- meta/conf/distro/include/security_flags.inc | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)meta/conf/distro/include/security_flags.inc +1
-1@@ -5,7 +5,7 @@ # From a Yocto Project perspective, this file is included and tested # in the DISTRO="poky" configuration. -GCCPIE ?= "--enable-default-pie" +GCCPIE ?= "${@bb.utils.contains('USER_CLASSES', 'image-prelink','--disable-default-pie', '--enable-default-pie', d)}"
# If static PIE is known to work well, GLIBCPIE="--enable-static-pie"
can be set#
_FORTIFY_SOURCErequires -O1 or higher, so disable in debug builds as
they use
--
2.25.1-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group. View/Reply Online (#160749):
https://lists.openembedded.org/g/openembedded-core/message/160749
Mute This Topic: https://lists.openembedded.org/mt/88551948/1686489
Group Owner: [email protected]
Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [ [email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
Quoted 5 lines · On Thu, 2022-01-20 at 12:41 -0500, [email protected] wrote:
Yes, we do use prelink. I think our use case primarily benefits from CoW memory savings, rather than load times. Of course, GCCPIE can be overridden in the distro layer, but seeing as image-prelink.bbclass still exists upstream, the default definition should support configurations that choose to enable it.
It would seem that glibc plan to remove prelink support in 2.36. If anyone wants it to stick around they need to convince the glibc developers not to do that as I don't think we'd be able to sustain it if it is removed there.
I'm seriously considering removing prelink from OE-Core before the LTS at this point given the position glibc has and the lack of maintenance prelink clearly has in OE :(.
Cheers,
Richard
Interesting, I thought the image-prelink class had been removed completely, but apparently it was only the references to it in local.conf.sample that was removed.
Anyway, if you are going to do that change, I believe it is better to use bb.data.inherits_class() to see if the image-prelink class is in use:
GCCPIE ?= "${@'--disable-default-pie' if bb.data.inherits_class('image-prelink', d) else '--enable-default-pie'}"
//Peter
From: [email protected] <[email protected]> On Behalf Of [email protected]
Sent: den 20 januari 2022 18:42
To: Alexander Kanavin <[email protected]>
Cc: OE-core <[email protected]>
Subject: Re: [OE-core] [PATCH] security_flags.inc: don't default to PIE if image-prelink is enabled
Yes, we do use prelink. I think our use case primarily benefits from CoW memory savings, rather than load times. Of course, GCCPIE can be overridden in the distro layer, but seeing as image-prelink.bbclass still exists upstream, the default definition should support configurations that choose to enable it.
On Thu, Jan 20, 2022 at 3:30 AM Alexander Kanavin <[email protected]<mailto:[email protected]>> wrote:
I think we pretty much abandoned prelink at this point, are you using it and do you see the benefits?
Alex
On Thu, 20 Jan 2022 at 04:30, <[email protected]<mailto:[email protected]>> wrote:
Since a prelinked rootfs is in conflict with PIE, don't attempt the latter
if the image enables prelink.
--- meta/conf/distro/include/security_flags.inc | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
meta/conf/distro/include/security_flags.inc +1 -1
@@ -5,7 +5,7 @@ # From a Yocto Project perspective, this file is included and tested # in the DISTRO="poky" configuration. -GCCPIE ?= "--enable-default-pie" +GCCPIE ?= "${@bb.utils.contains('USER_CLASSES', 'image-prelink', '--disable-default-pie', '--enable-default-pie', d)}<mailto:$%[email protected]('USER_CLASSES',%20'image-prelink',%20'--disable-default-pie',%20'--enable-default-pie',%20d)%7d>" # If static PIE is known to work well, GLIBCPIE="--enable-static-pie" can be set # _FORTIFY_SOURCE requires -O1 or higher, so disable in debug builds as they use
--
2.25.1