Skip to contentSkip to conversation

INFO: task hung in hub_port_init (2)

syzbot New syzbot 2 participants 4 messages Jan 20, 2022 – Jan 24, 2022 1 message not in the archive USB

lore
Share & tools
lore

syzbot

author syzbot
#1 lore raw
In reply to a message not in the archive

Hello,

syzbot has tested the proposed patch and the reproducer did not trigger any issue:

Reported-and-tested-by [email protected]

Tested on:

commit:         6f59bc24 Add linux-next specific files for 20220118
git tree:       git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
kernel config:  https://syzkaller.appspot.com/x/.config?x=94e8da4df9ab6319
dashboard link: https://syzkaller.appspot.com/bug?extid=76629376e06e2c2ad626
compiler:       gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2
patch:          https://syzkaller.appspot.com/x/patch.diff?x=101ba7efb00000

Note: testing is done by a robot and is best-effort only.

#2 lore raw
Quoted 8 lines · syzbot

Hello,

syzbot has tested the proposed patch and the reproducer did not trigger any issue:

Reported-and-tested-by [email protected]

Tested on:

Quoted 8 lines
commit:         6f59bc24 Add linux-next specific files for 20220118
git tree:       git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
kernel config:  https://syzkaller.appspot.com/x/.config?x=94e8da4df9ab6319
dashboard link: https://syzkaller.appspot.com/bug?extid=76629376e06e2c2ad626
compiler:       gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2
patch:          https://syzkaller.appspot.com/x/patch.diff?x=101ba7efb00000

Note: testing is done by a robot and is best-effort only.

Attempted fix.

Alan Stern

#syz test: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/ 6f59bc24

drivers/usb/core/hcd.c +13 -0
Index: usb-devel/drivers/usb/core/hcd.c
===================================================================
@@ -1563,6 +1563,12 @@ int usb_hcd_submit_urb (struct urb *urb,
 		urb->hcpriv = NULL;
 		INIT_LIST_HEAD(&urb->urb_list);
 		atomic_dec(&urb->use_count);
+		/*
+		 * Order the write of urb->use_count above against the read of
+		 * urb->reject below.  Pairs with the memory barriers in
+		 * usb_kill_urb() and usb_poison_urb().
+		 */
+		smp_mb__after_atomic();
 		atomic_dec(&urb->dev->urbnum);
 		if (atomic_read(&urb->reject))
 			wake_up(&usb_kill_urb_queue);
@@ -1665,6 +1671,13 @@ static void __usb_hcd_giveback_urb(struc
 
 	usb_anchor_resume_wakeups(anchor);
 	atomic_dec(&urb->use_count);
+	/*
+	 * Order the write of urb->use_count above against the read of
+	 * urb->reject below.  Pairs with the memory barriers in
+	 * usb_kill_urb() and usb_poison_urb().
+	 */
+	smp_mb__after_atomic();
+
 	if (unlikely(atomic_read(&urb->reject)))
 		wake_up(&usb_kill_urb_queue);
 	usb_put_urb(urb);
drivers/usb/core/urb.c +12 -0
Index: usb-devel/drivers/usb/core/urb.c
===================================================================
@@ -715,6 +715,12 @@ void usb_kill_urb(struct urb *urb)
 	if (!(urb && urb->dev && urb->ep))
 		return;
 	atomic_inc(&urb->reject);
+	/*
+	 * Order the write of urb->reject above against the read of
+	 * urb->use_count below.  Pairs with the barriers in
+	 * __usb_hcd_giveback_urb() and usb_hcd_submit_urb().
+	 */
+	smp_mb__after_atomic();
 
 	usb_hcd_unlink_urb(urb, -ENOENT);
 	wait_event(usb_kill_urb_queue, atomic_read(&urb->use_count) == 0);
@@ -756,6 +762,12 @@ void usb_poison_urb(struct urb *urb)
 	if (!urb)
 		return;
 	atomic_inc(&urb->reject);
+	/*
+	 * Order the write of urb->reject above against the read of
+	 * urb->use_count below.  Pairs with the barriers in
+	 * __usb_hcd_giveback_urb() and usb_hcd_submit_urb().
+	 */
+	smp_mb__after_atomic();
 
 	if (!urb->dev || !urb->ep)
 		return;
author syzbot
#3 lore raw
syzbot has tested the proposed patch and the reproducer did not trigger any issue:

Hello,

syzbot has tested the proposed patch and the reproducer did not trigger any issue:

Reported-and-tested-by [email protected]

Tested on:

commit:         6f59bc24 Add linux-next specific files for 20220118
git tree:       https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/
kernel config:  https://syzkaller.appspot.com/x/.config?x=94e8da4df9ab6319
dashboard link: https://syzkaller.appspot.com/bug?extid=76629376e06e2c2ad626
compiler:       gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2
patch:          https://syzkaller.appspot.com/x/patch.diff?x=1596bbdfb00000

Note: testing is done by a robot and is best-effort only.

#4 lore raw

PATCH 1/1 USB: core: Fix hang in usb_kill_urb by adding memory barriers

The syzbot fuzzer has identified a bug in which processes hang waiting for usb_kill_urb() to return. It turns out the issue is not unlinking the URB; that works just fine. Rather, the problem arises when the wakeup notification that the URB has completed is not received.

The reason is memory-access ordering on SMP systems. In outline form, usb_kill_urb() and __usb_hcd_giveback_urb() operating concurrently on different CPUs perform the following actions:

CPU 0 CPU 1
---------------------------- ---------------------------------
usb_kill_urb(): __usb_hcd_giveback_urb():
... ...
atomic_inc(&urb->reject); atomic_dec(&urb->use_count);
... ...
wait_event(usb_kill_urb_queue,

	atomic_read(&urb->use_count) == 0);
					  if (atomic_read(&urb->reject))
						wake_up(&usb_kill_urb_queue);

Confining your attention to urb->reject and urb->use_count, you can see that the overall pattern of accesses on CPU 0 is:

	write urb->reject, then read urb->use_count;

whereas the overall pattern of accesses on CPU 1 is:

	write urb->use_count, then read urb->reject.

This pattern is referred to in memory-model circles as SB (for "Store Buffering"), and it is well known that without suitable enforcement of the desired order of accesses -- in the form of memory barriers -- it is entirely possible for one or both CPUs to execute their reads ahead of their writes. The end result will be that sometimes CPU 0 sees the old un-decremented value of urb->use_count while CPU 1 sees the old un-incremented value of urb->reject. Consequently CPU 0 ends up on the wait queue and never gets woken up, leading to the observed hang in usb_kill_urb().

The same pattern of accesses occurs in usb_poison_urb() and the failure pathway of usb_hcd_submit_urb().

The problem is fixed by adding suitable memory barriers. To provide proper memory-access ordering in the SB pattern, a full barrier is required on both CPUs. The atomic_inc() and atomic_dec() accesses themselves don't provide any memory ordering, but since they are present, we can use the optimized smp_mb__after_atomic() memory barrier in the various routines to obtain the desired effect.

This patch adds the necessary memory barriers.

---

[as1969]

 drivers/usb/core/hcd.c |   14 ++++++++++++++
 drivers/usb/core/urb.c |   12 ++++++++++++
 2 files changed, 26 insertions(+)
drivers/usb/core/hcd.c +14 -0
Index: usb-devel/drivers/usb/core/hcd.c
===================================================================
@@ -1563,6 +1563,13 @@ int usb_hcd_submit_urb (struct urb *urb,
 		urb->hcpriv = NULL;
 		INIT_LIST_HEAD(&urb->urb_list);
 		atomic_dec(&urb->use_count);
+		/*
+		 * Order the write of urb->use_count above before the read
+		 * of urb->reject below.  Pairs with the memory barriers in
+		 * usb_kill_urb() and usb_poison_urb().
+		 */
+		smp_mb__after_atomic();
+
 		atomic_dec(&urb->dev->urbnum);
 		if (atomic_read(&urb->reject))
 			wake_up(&usb_kill_urb_queue);
@@ -1665,6 +1672,13 @@ static void __usb_hcd_giveback_urb(struc
 
 	usb_anchor_resume_wakeups(anchor);
 	atomic_dec(&urb->use_count);
+	/*
+	 * Order the write of urb->use_count above before the read
+	 * of urb->reject below.  Pairs with the memory barriers in
+	 * usb_kill_urb() and usb_poison_urb().
+	 */
+	smp_mb__after_atomic();
+
 	if (unlikely(atomic_read(&urb->reject)))
 		wake_up(&usb_kill_urb_queue);
 	usb_put_urb(urb);
drivers/usb/core/urb.c +12 -0
Index: usb-devel/drivers/usb/core/urb.c
===================================================================
@@ -715,6 +715,12 @@ void usb_kill_urb(struct urb *urb)
 	if (!(urb && urb->dev && urb->ep))
 		return;
 	atomic_inc(&urb->reject);
+	/*
+	 * Order the write of urb->reject above before the read
+	 * of urb->use_count below.  Pairs with the barriers in
+	 * __usb_hcd_giveback_urb() and usb_hcd_submit_urb().
+	 */
+	smp_mb__after_atomic();
 
 	usb_hcd_unlink_urb(urb, -ENOENT);
 	wait_event(usb_kill_urb_queue, atomic_read(&urb->use_count) == 0);
@@ -756,6 +762,12 @@ void usb_poison_urb(struct urb *urb)
 	if (!urb)
 		return;
 	atomic_inc(&urb->reject);
+	/*
+	 * Order the write of urb->reject above before the read
+	 * of urb->use_count below.  Pairs with the barriers in
+	 * __usb_hcd_giveback_urb() and usb_hcd_submit_urb().
+	 */
+	smp_mb__after_atomic();
 
 	if (!urb->dev || !urb->ep)
 		return;