Support Spi in i2c-multi-instantiate driver

This can then be used to find a spi resource inside an ACPI node, and allocate a spi device.

Signed-off-by Stefan Binding <[email protected]>

---
 drivers/spi/spi.c       | 46 ++++++++++++++++++++++++++++++++---------
 include/linux/spi/spi.h | 12 +++++++++++
 2 files changed, 48 insertions(+), 10 deletions(-)

drivers/spi/spi.c +36 -10

index 1eb84101c4ad..13f4701f0694 100644
@@ -2410,8 +2410,18 @@ static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
 	return 1;
 }
 
-static acpi_status acpi_register_spi_device(struct spi_controller *ctlr,
-					    struct acpi_device *adev)
+/**
+ * acpi_spi_device_alloc - Allocate a spi device, and fill it in with ACPI information
+ * @ctlr: controller to which the spi device belongs
+ * @adev: ACPI Device for the spi device
+ *
+ * This should be used to allocate a new spi device from and ACPI Node.
+ * The caller is responsible for calling spi_add_device to register the spi device.
+ *
+ * Return: a pointer to the new device, or ERR_PTR on error.
+ */
+struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
+					 struct acpi_device *adev)
 {
 	acpi_handle parent_handle = NULL;
 	struct list_head resource_list;

@@ -2419,10 +2429,6 @@ static acpi_status acpi_register_spi_device(struct spi_controller *ctlr,
 	struct spi_device *spi;
 	int ret;
 
-	if (acpi_bus_get_status(adev) || !adev->status.present ||
-	    acpi_device_enumerated(adev))
-		return AE_OK;
-
 	lookup.ctlr		= ctlr;
 	lookup.irq		= -1;
 

@@ -2433,7 +2439,7 @@ static acpi_status acpi_register_spi_device(struct spi_controller *ctlr,
 
 	if (ret < 0)
 		/* found SPI in _CRS but it points to another controller */
-		return AE_OK;
+		return ERR_PTR(-ENODEV);
 
 	if (!lookup.max_speed_hz &&
 	    ACPI_SUCCESS(acpi_get_parent(adev->handle, &parent_handle)) &&

@@ -2443,16 +2449,15 @@ static acpi_status acpi_register_spi_device(struct spi_controller *ctlr,
 	}
 
 	if (!lookup.max_speed_hz)
-		return AE_OK;
+		return ERR_PTR(-ENODEV);
 
 	spi = spi_alloc_device(ctlr);
 	if (!spi) {
 		dev_err(&ctlr->dev, "failed to allocate SPI device for %s\n",
 			dev_name(&adev->dev));
-		return AE_NO_MEMORY;
+		return ERR_PTR(-ENOMEM);
 	}
 
-
 	ACPI_COMPANION_SET(&spi->dev, adev);
 	spi->max_speed_hz	= lookup.max_speed_hz;
 	spi->mode		|= lookup.mode;

@@ -2460,6 +2465,27 @@ static acpi_status acpi_register_spi_device(struct spi_controller *ctlr,
 	spi->bits_per_word	= lookup.bits_per_word;
 	spi->chip_select	= lookup.chip_select;
 
+	return spi;
+}
+EXPORT_SYMBOL_GPL(acpi_spi_device_alloc);
+
+static acpi_status acpi_register_spi_device(struct spi_controller *ctlr,
+					    struct acpi_device *adev)
+{
+	struct spi_device *spi;
+
+	if (acpi_bus_get_status(adev) || !adev->status.present ||
+	    acpi_device_enumerated(adev))
+		return AE_OK;
+
+	spi = acpi_spi_device_alloc(ctlr, adev);
+	if (IS_ERR(spi)) {
+		if (PTR_ERR(spi) == -ENOMEM)
+			return AE_NO_MEMORY;
+		else
+			return AE_OK;
+	}
+
 	acpi_set_modalias(adev, acpi_device_hid(adev), spi->modalias,
 			  sizeof(spi->modalias));
 

include/linux/spi/spi.h +2 -0

index 0346a3ff27fd..200725692b93 100644
@@ -16,6 +16,7 @@
 #include <linux/gpio/consumer.h>
 
 #include <uapi/linux/spi/spi.h>
+#include <linux/acpi.h>
 
 struct dma_chan;
 struct software_node;

@@ -759,6 +760,17 @@ extern int devm_spi_register_controller(struct device *dev,
 					struct spi_controller *ctlr);
 extern void spi_unregister_controller(struct spi_controller *ctlr);
 
+#if IS_ENABLED(CONFIG_ACPI)

include/linux/spi/spi.h +0 -0

 /*
  * SPI resource management while processing a SPI message
  */

This functions were previously made private since they were not used. However, these functions will be needed again.

Partial revert of commit da21fde0fdb3
("spi: Make several public functions private to spi.c")

Signed-off-by Stefan Binding <[email protected]>

---
 drivers/spi/spi.c       |  6 ++++--
 include/linux/spi/spi.h | 12 ++++++++++++
 2 files changed, 16 insertions(+), 2 deletions(-)

drivers/spi/spi.c +4 -2

index 4599b121d744..1eb84101c4ad 100644
@@ -532,7 +532,7 @@ static DEFINE_MUTEX(board_lock);
  *
  * Return: a pointer to the new device, or NULL.
  */
-static struct spi_device *spi_alloc_device(struct spi_controller *ctlr)
+struct spi_device *spi_alloc_device(struct spi_controller *ctlr)
 {
 	struct spi_device	*spi;
 

@@ -557,6 +557,7 @@ static struct spi_device *spi_alloc_device(struct spi_controller *ctlr)
 	device_initialize(&spi->dev);
 	return spi;
 }
+EXPORT_SYMBOL_GPL(spi_alloc_device);
 
 static void spi_dev_set_name(struct spi_device *spi)
 {

@@ -652,7 +653,7 @@ static int __spi_add_device(struct spi_device *spi)
  *
  * Return: 0 on success; negative errno on failure
  */
-static int spi_add_device(struct spi_device *spi)
+int spi_add_device(struct spi_device *spi)
 {
 	struct spi_controller *ctlr = spi->controller;
 	struct device *dev = ctlr->dev.parent;

@@ -673,6 +674,7 @@ static int spi_add_device(struct spi_device *spi)
 	mutex_unlock(&ctlr->add_lock);
 	return status;
 }
+EXPORT_SYMBOL_GPL(spi_add_device);
 
 static int spi_add_device_locked(struct spi_device *spi)
 {

include/linux/spi/spi.h +12 -0

index 7ab3fed7b804..0346a3ff27fd 100644
@@ -1452,7 +1452,19 @@ spi_register_board_info(struct spi_board_info const *info, unsigned n)
  * use spi_new_device() to describe each device.  You can also call
  * spi_unregister_device() to start making that device vanish, but
  * normally that would be handled by spi_unregister_controller().
+ *
+ * You can also use spi_alloc_device() and spi_add_device() to use a two
+ * stage registration sequence for each spi_device. This gives the caller
+ * some more control over the spi_device structure before it is registered,
+ * but requires that caller to initialize fields that would otherwise
+ * be defined using the board info.
  */
+extern struct spi_device *
+spi_alloc_device(struct spi_controller *ctlr);
+
+extern int
+spi_add_device(struct spi_device *spi);
+
 extern struct spi_device *
 spi_new_device(struct spi_controller *, struct spi_board_info *);
 

Some ACPI nodes may have more than one Spi Resource. To be able to handle these case, its necessary to have a way of counting these resources.

Signed-off-by Stefan Binding <[email protected]>

---
 drivers/spi/spi.c       | 40 ++++++++++++++++++++++++++++++++++++++++
 include/linux/spi/spi.h |  6 ++++++
 2 files changed, 46 insertions(+)

drivers/spi/spi.c +40 -0

index 898cc9931490..8c0c2e26609a 100644
@@ -2325,6 +2325,46 @@ struct acpi_spi_lookup {
 	int			irq_index;
 };
 
+static int acpi_spi_count(struct acpi_resource *ares, void *data)
+{
+	struct acpi_resource_spi_serialbus *sb;
+	int *count = data;
+
+	if (ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS)
+		return 1;
+
+	sb = &ares->data.spi_serial_bus;
+	if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_SPI)
+		return 1;
+
+	*count = *count + 1;
+
+	return 1;
+}
+
+/**
+ * acpi_spi_count_resources - Count the number of SpiSerialBus resources
+ * @adev:	ACPI device
+ *
+ * Returns the number of SpiSerialBus resources in the ACPI-device's
+ * resource-list; or a negative error code.
+ */
+int acpi_spi_count_resources(struct acpi_device *adev)
+{
+	LIST_HEAD(r);
+	int count = 0;
+	int ret;
+
+	ret = acpi_dev_get_resources(adev, &r, acpi_spi_count, &count);
+	if (ret < 0)
+		return ret;
+
+	acpi_dev_free_resource_list(&r);
+
+	return count;
+}
+EXPORT_SYMBOL_GPL(acpi_spi_count_resources);
+
 static void acpi_spi_parse_apple_properties(struct acpi_device *dev,
 					    struct acpi_spi_lookup *lookup)
 {

include/linux/spi/spi.h +6 -0

index 1a34fd0f6ca2..25a82729f8da 100644
@@ -764,6 +764,7 @@ extern void spi_unregister_controller(struct spi_controller *ctlr);
 extern struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
 						struct acpi_device *adev,
 						int index, int irq_index);
+int acpi_spi_count_resources(struct acpi_device *adev);
 #else
 static inline struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
 						       struct acpi_device *adev,

@@ -771,6 +772,11 @@ static inline struct spi_device *acpi_spi_device_alloc(struct spi_controller *ct
 {
 	return ERR_PTR(-EOPNOTSUPP);
 }
+
+int acpi_spi_count_resources(struct acpi_device *adev)
+{
+	return -EOPNOTSUPP;
+}
 #endif
 
 /*

If a node contains more than one Spi Resources, it may be necessary to use an index to select which one you want to allocate a spi device for.

Signed-off-by Stefan Binding <[email protected]>

---
 drivers/spi/spi.c       | 56 +++++++++++++++++++++++++++++++++++------
 include/linux/spi/spi.h |  6 +++--
 2 files changed, 52 insertions(+), 10 deletions(-)

drivers/spi/spi.c +21 -2

index 13f4701f0694..898cc9931490 100644
@@ -2320,6 +2320,9 @@ struct acpi_spi_lookup {
 	int			irq;
 	u8			bits_per_word;
 	u8			chip_select;
+	int			n;
+	int			index;
+	int			irq_index;
 };
 
 static void acpi_spi_parse_apple_properties(struct acpi_device *dev,

@@ -2351,6 +2354,8 @@ static void acpi_spi_parse_apple_properties(struct acpi_device *dev,
 		lookup->mode |= SPI_CPHA;
 }
 
+static struct spi_controller *acpi_spi_find_controller_by_adev(struct acpi_device *adev);
+
 static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
 {
 	struct acpi_spi_lookup *lookup = data;

@@ -2364,14 +2369,35 @@ static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
 		sb = &ares->data.spi_serial_bus;
 		if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_SPI) {
 
+			if (lookup->index != -1 && lookup->n++ != lookup->index)
+				return 1;
+
+			if (lookup->index == -1 && !ctlr)
+				return -ENODEV;
+
 			status = acpi_get_handle(NULL,
 						 sb->resource_source.string_ptr,
 						 &parent_handle);
 
-			if (ACPI_FAILURE(status) ||
-			    ACPI_HANDLE(ctlr->dev.parent) != parent_handle)
+			if (ACPI_FAILURE(status))
 				return -ENODEV;
 
+			if (ctlr) {
+				if (ACPI_HANDLE(ctlr->dev.parent) != parent_handle)
+					return -ENODEV;
+			} else {
+				struct acpi_device *adev;
+
+				if (acpi_bus_get_device(parent_handle, &adev))
+					return -ENODEV;
+

drivers/spi/spi.c +19 -5

@@ -2414,14 +2440,22 @@ static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
  * acpi_spi_device_alloc - Allocate a spi device, and fill it in with ACPI information
  * @ctlr: controller to which the spi device belongs
  * @adev: ACPI Device for the spi device
+ * @index: Index of the spi resource inside the ACPI Node
+ * @irq_index: Index of the GPIO resource for the IRQ inside the ACPI Node
  *
  * This should be used to allocate a new spi device from and ACPI Node.
  * The caller is responsible for calling spi_add_device to register the spi device.
  *
+ * If ctlr is set to NULL, the Controller for the spi device will be looked up
+ * using the resource.
+ * If index is set to -1, index is not used.
+ * Note: If index is -1, ctlr must be set.
+ *
  * Return: a pointer to the new device, or ERR_PTR on error.
  */
 struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
-					 struct acpi_device *adev)
+					 struct acpi_device *adev,
+					 int index, int irq_index)
 {
 	acpi_handle parent_handle = NULL;
 	struct list_head resource_list;

@@ -2429,8 +2463,14 @@ struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
 	struct spi_device *spi;
 	int ret;
 
+	if (!ctlr && index == -1)
+		return ERR_PTR(-EINVAL);
+
 	lookup.ctlr		= ctlr;
 	lookup.irq		= -1;
+	lookup.index		= index;
+	lookup.n		= 0;
+	lookup.irq_index	= irq_index;
 
 	INIT_LIST_HEAD(&resource_list);
 	ret = acpi_dev_get_resources(adev, &resource_list,

@@ -2443,7 +2483,7 @@ struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
 
 	if (!lookup.max_speed_hz &&
 	    ACPI_SUCCESS(acpi_get_parent(adev->handle, &parent_handle)) &&
-	    ACPI_HANDLE(ctlr->dev.parent) == parent_handle) {
+	    ACPI_HANDLE(lookup.ctlr->dev.parent) == parent_handle) {
 		/* Apple does not use _CRS but nested devices for SPI slaves */
 		acpi_spi_parse_apple_properties(adev, &lookup);
 	}

@@ -2451,9 +2491,9 @@ struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
 	if (!lookup.max_speed_hz)
 		return ERR_PTR(-ENODEV);
 
-	spi = spi_alloc_device(ctlr);
+	spi = spi_alloc_device(lookup.ctlr);
 	if (!spi) {
-		dev_err(&ctlr->dev, "failed to allocate SPI device for %s\n",
+		dev_err(&lookup.ctlr->dev, "failed to allocate SPI device for %s\n",
 			dev_name(&adev->dev));
 		return ERR_PTR(-ENOMEM);
 	}

@@ -2478,7 +2518,7 @@ static acpi_status acpi_register_spi_device(struct spi_controller *ctlr,
 	    acpi_device_enumerated(adev))
 		return AE_OK;
 
-	spi = acpi_spi_device_alloc(ctlr, adev);
+	spi = acpi_spi_device_alloc(ctlr, adev, -1, 0);
 	if (IS_ERR(spi)) {
 		if (PTR_ERR(spi) == -ENOMEM)
 			return AE_NO_MEMORY;

include/linux/spi/spi.h +0 -1

index 200725692b93..1a34fd0f6ca2 100644
@@ -762,10 +762,12 @@ extern void spi_unregister_controller(struct spi_controller *ctlr);
 
 #if IS_ENABLED(CONFIG_ACPI)
 extern struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
-						struct acpi_device *adev);

Some ACPI nodes may have more than one Spi Resource. To be able to handle these case, its necessary to have a way of counting these resources.

Signed-off-by Stefan Binding <[email protected]>

---
 drivers/spi/spi.c       | 40 ++++++++++++++++++++++++++++++++++++++++
 include/linux/spi/spi.h |  6 ++++++
 2 files changed, 46 insertions(+)

drivers/spi/spi.c +40 -0

index 898cc9931490..8c0c2e26609a 100644
@@ -2325,6 +2325,46 @@ struct acpi_spi_lookup {
 	int			irq_index;
 };
 
+static int acpi_spi_count(struct acpi_resource *ares, void *data)
+{
+	struct acpi_resource_spi_serialbus *sb;
+	int *count = data;
+
+	if (ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS)
+		return 1;
+
+	sb = &ares->data.spi_serial_bus;
+	if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_SPI)
+		return 1;
+
+	*count = *count + 1;
+
+	return 1;
+}
+
+/**
+ * acpi_spi_count_resources - Count the number of SpiSerialBus resources
+ * @adev:	ACPI device
+ *
+ * Returns the number of SpiSerialBus resources in the ACPI-device's
+ * resource-list; or a negative error code.
+ */
+int acpi_spi_count_resources(struct acpi_device *adev)
+{
+	LIST_HEAD(r);
+	int count = 0;
+	int ret;
+
+	ret = acpi_dev_get_resources(adev, &r, acpi_spi_count, &count);
+	if (ret < 0)
+		return ret;
+
+	acpi_dev_free_resource_list(&r);
+
+	return count;
+}
+EXPORT_SYMBOL_GPL(acpi_spi_count_resources);
+
 static void acpi_spi_parse_apple_properties(struct acpi_device *dev,
 					    struct acpi_spi_lookup *lookup)
 {

include/linux/spi/spi.h +1 -0

index 1a34fd0f6ca2..25a82729f8da 100644
@@ -764,6 +764,7 @@ extern void spi_unregister_controller(struct spi_controller *ctlr);
 extern struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
 						struct acpi_device *adev,
 						int index, int irq_index);
+int acpi_spi_count_resources(struct acpi_device *adev);
 #else
 static inline struct spi_device *acpi_spi_device_alloc(struct spi_controller *ctlr,
 						       struct acpi_device *adev,

@@ -771,6 +772,11 @@ static inline struct spi_device *acpi_spi_device_alloc(struct spi_controller *ct
 {

From: Lucas Tanure <[email protected]>

Rename I2C multi instantiate driver to bus-multi-instantiate for upcoming addition of SPI support

Signed-off-by Lucas Tanure <[email protected]>

Signed-off-by Stefan Binding <[email protected]>

---
 MAINTAINERS                                   |  4 +-
 drivers/acpi/scan.c                           |  2 +-
 drivers/platform/x86/Kconfig                  |  4 +-
 drivers/platform/x86/Makefile                 |  2 +-
 ...-instantiate.c => bus-multi-instantiate.c} | 89 +++++++++----------
 5 files changed, 50 insertions(+), 51 deletions(-)
 rename drivers/platform/x86/{i2c-multi-instantiate.c => bus-multi-instantiate.c} (53%)

MAINTAINERS +2 -2

index 4e828542b089..4a7e3cff9245 100644
@@ -388,11 +388,11 @@ L:	[email protected] (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/acpi/arm64
 
-ACPI I2C MULTI INSTANTIATE DRIVER
+ACPI BUS MULTI INSTANTIATE DRIVER
 M:	Hans de Goede <[email protected]>
 L:	[email protected]
 S:	Maintained
-F:	drivers/platform/x86/i2c-multi-instantiate.c
+F:	drivers/platform/x86/bus-multi-instantiate.c
 
 ACPI PCC(Platform Communication Channel) MAILBOX DRIVER
 M:	Sudeep Holla <[email protected]>

drivers/acpi/scan.c +1 -1

index 1331756d4cfc..e4fda14572e7 100644
@@ -1738,7 +1738,7 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device)
 	 * must be instantiated for each, each with its own i2c_device_id.
 	 * Normally we only instantiate an i2c-client for the first resource,
 	 * using the ACPI HID as id. These special cases are handled by the
-	 * drivers/platform/x86/i2c-multi-instantiate.c driver, which knows
+	 * drivers/platform/x86/bus-multi-instantiate.c driver, which knows
 	 * which i2c_device_id to use for each resource.
 	 */
 		{"BSG1160", },

drivers/platform/x86/Kconfig +2 -2

index 24deeeb29af2..616da06aa6b9 100644
@@ -990,7 +990,7 @@ config TOPSTAR_LAPTOP
 
 	  If you have a Topstar laptop, say Y or M here.
 
-config I2C_MULTI_INSTANTIATE
+config BUS_MULTI_INSTANTIATE
 	tristate "I2C multi instantiate pseudo device driver"
 	depends on I2C && ACPI
 	help

@@ -999,7 +999,7 @@ config I2C_MULTI_INSTANTIATE
 	  for each device in the firmware-node.
 
 	  To compile this driver as a module, choose M here: the module
-	  will be called i2c-multi-instantiate.
+	  will be called bus-multi-instantiate.
 
 config MLX_PLATFORM
 	tristate "Mellanox Technologies platform support"

drivers/platform/x86/Makefile +1 -1

index c12a9b044fd8..b5852e3fbab1 100644
@@ -110,7 +110,7 @@ obj-$(CONFIG_TOPSTAR_LAPTOP)	+= topstar-laptop.o
 
 # Platform drivers
 obj-$(CONFIG_FW_ATTR_CLASS)		+= firmware_attributes_class.o
-obj-$(CONFIG_I2C_MULTI_INSTANTIATE)	+= i2c-multi-instantiate.o
+obj-$(CONFIG_BUS_MULTI_INSTANTIATE)	+= bus-multi-instantiate.o
 obj-$(CONFIG_MLX_PLATFORM)		+= mlx-platform.o
 obj-$(CONFIG_TOUCHSCREEN_DMI)		+= touchscreen_dmi.o
 obj-$(CONFIG_WIRELESS_HOTKEY)		+= wireless-hotkey.o

drivers/platform/x86/bus-multi-instantiate.c renamed from drivers/platform/x86/i2c-multi-instantiate.c +44 -45

similarity index 53%
rename from drivers/platform/x86/i2c-multi-instantiate.c
rename to drivers/platform/x86/bus-multi-instantiate.c
index 4956a1df5b90..982dfecfd27c 100644
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- * I2C multi-instantiate driver, pseudo driver to instantiate multiple
+ * Bus multi-instantiate driver, pseudo driver to instantiate multiple
  * i2c-clients from a single fwnode.
  *
  * Copyright 2018 Hans de Goede <[email protected]>

@@ -21,29 +21,29 @@
 #define IRQ_RESOURCE_GPIO	1
 #define IRQ_RESOURCE_APIC	2
 
-struct i2c_inst_data {
+struct bmi_instance {
 	const char *type;
 	unsigned int flags;
 	int irq_idx;
 };
 
-struct i2c_multi_inst_data {
-	int num_clients;
-	struct i2c_client *clients[];
+struct bmi {
+	int i2c_num;
+	struct i2c_client *i2c_devs[];
 };
 
-static int i2c_multi_inst_probe(struct platform_device *pdev)
+static int bmi_probe(struct platform_device *pdev)
 {
-	struct i2c_multi_inst_data *multi;
-	const struct i2c_inst_data *inst_data;
 	struct i2c_board_info board_info = {};
+	const struct bmi_instance *inst;
 	struct device *dev = &pdev->dev;
 	struct acpi_device *adev;
+	struct bmi *bmi;
 	char name[32];
 	int i, ret;
 
-	inst_data = device_get_match_data(dev);
-	if (!inst_data) {
+	inst = device_get_match_data(dev);
+	if (!inst) {
 		dev_err(dev, "Error ACPI match data is missing\n");
 		return -ENODEV;
 	}

@@ -55,33 +55,32 @@ static int i2c_multi_inst_probe(struct platform_device *pdev)
 	if (ret < 0)
 		return ret;
 
-	multi = devm_kmalloc(dev, struct_size(multi, clients, ret), GFP_KERNEL);
-	if (!multi)
+	bmi = devm_kmalloc(dev, struct_size(bmi, i2c_devs, ret), GFP_KERNEL);
+	if (!bmi)
 		return -ENOMEM;
 
-	multi->num_clients = ret;
+	bmi->i2c_num = ret;
 
-	for (i = 0; i < multi->num_clients && inst_data[i].type; i++) {
+	for (i = 0; i < bmi->i2c_num && inst[i].type; i++) {
 		memset(&board_info, 0, sizeof(board_info));
-		strlcpy(board_info.type, inst_data[i].type, I2C_NAME_SIZE);
-		snprintf(name, sizeof(name), "%s-%s.%d", dev_name(dev),
-			 inst_data[i].type, i);
+		strlcpy(board_info.type, inst[i].type, I2C_NAME_SIZE);
+		snprintf(name, sizeof(name), "%s-%s.%d", dev_name(dev), inst[i].type, i);
 		board_info.dev_name = name;
-		switch (inst_data[i].flags & IRQ_RESOURCE_TYPE) {
+		switch (inst[i].flags & IRQ_RESOURCE_TYPE) {
 		case IRQ_RESOURCE_GPIO:
-			ret = acpi_dev_gpio_irq_get(adev, inst_data[i].irq_idx);
+			ret = acpi_dev_gpio_irq_get(adev, inst[i].irq_idx);
 			if (ret < 0) {
 				dev_err(dev, "Error requesting irq at index %d: %d\n",
-					inst_data[i].irq_idx, ret);
+						inst[i].irq_idx, ret);
 				goto error;
 			}
 			board_info.irq = ret;
 			break;
 		case IRQ_RESOURCE_APIC:
-			ret = platform_get_irq(pdev, inst_data[i].irq_idx);
+			ret = platform_get_irq(pdev, inst[i].irq_idx);
 			if (ret < 0) {
 				dev_dbg(dev, "Error requesting irq at index %d: %d\n",
-					inst_data[i].irq_idx, ret);
+					inst[i].irq_idx, ret);
 				goto error;
 			}
 			board_info.irq = ret;

@@ -90,48 +89,48 @@ static int i2c_multi_inst_probe(struct platform_device *pdev)
 			board_info.irq = 0;
 			break;
 		}
-		multi->clients[i] = i2c_acpi_new_device(dev, i, &board_info);
-		if (IS_ERR(multi->clients[i])) {
-			ret = dev_err_probe(dev, PTR_ERR(multi->clients[i]),
+		bmi->i2c_devs[i] = i2c_acpi_new_device(dev, i, &board_info);
+		if (IS_ERR(bmi->i2c_devs[i])) {
+			ret = dev_err_probe(dev, PTR_ERR(bmi->i2c_devs[i]),
 					    "Error creating i2c-client, idx %d\n", i);
 			goto error;
 		}
 	}
-	if (i < multi->num_clients) {
+	if (i < bmi->i2c_num) {
 		dev_err(dev, "Error finding driver, idx %d\n", i);
 		ret = -ENODEV;
 		goto error;
 	}
 
-	platform_set_drvdata(pdev, multi);
+	platform_set_drvdata(pdev, bmi);
 	return 0;
 
 error:
 	while (--i >= 0)
-		i2c_unregister_device(multi->clients[i]);
+		i2c_unregister_device(bmi->i2c_devs[i]);
 
 	return ret;
 }
 
-static int i2c_multi_inst_remove(struct platform_device *pdev)
+static int bmi_remove(struct platform_device *pdev)
 {
-	struct i2c_multi_inst_data *multi = platform_get_drvdata(pdev);
+	struct bmi *bmi = platform_get_drvdata(pdev);
 	int i;
 
-	for (i = 0; i < multi->num_clients; i++)
-		i2c_unregister_device(multi->clients[i]);
+	for (i = 0; i < bmi->i2c_num; i++)
+		i2c_unregister_device(bmi->i2c_devs[i]);
 
 	return 0;
 }
 
-static const struct i2c_inst_data bsg1160_data[]  = {
+static const struct bmi_instance bsg1160_data[]  = {
 	{ "bmc150_accel", IRQ_RESOURCE_GPIO, 0 },
 	{ "bmc150_magn" },
 	{ "bmg160" },
 	{}
 };
 
-static const struct i2c_inst_data bsg2150_data[]  = {
+static const struct bmi_instance bsg2150_data[]  = {
 	{ "bmc150_accel", IRQ_RESOURCE_GPIO, 0 },
 	{ "bmc150_magn" },
 	/* The resources describe a 3th client, but it is not really there. */

@@ -139,7 +138,7 @@ static const struct i2c_inst_data bsg2150_data[]  = {
 	{}
 };
 
-static const struct i2c_inst_data int3515_data[]  = {
+static const struct bmi_instance int3515_data[]  = {
 	{ "tps6598x", IRQ_RESOURCE_APIC, 0 },
 	{ "tps6598x", IRQ_RESOURCE_APIC, 1 },
 	{ "tps6598x", IRQ_RESOURCE_APIC, 2 },

@@ -148,27 +147,27 @@ static const struct i2c_inst_data int3515_data[]  = {
 };
 
 /*
- * Note new device-ids must also be added to i2c_multi_instantiate_ids in
+ * Note new device-ids must also be added to bus_multi_instantiate_ids in
  * drivers/acpi/scan.c: acpi_device_enumeration_by_parent().
  */
-static const struct acpi_device_id i2c_multi_inst_acpi_ids[] = {
+static const struct acpi_device_id bmi_acpi_ids[] = {
 	{ "BSG1160", (unsigned long)bsg1160_data },
 	{ "BSG2150", (unsigned long)bsg2150_data },
 	{ "INT3515", (unsigned long)int3515_data },
 	{ }
 };
-MODULE_DEVICE_TABLE(acpi, i2c_multi_inst_acpi_ids);
+MODULE_DEVICE_TABLE(acpi, bmi_acpi_ids);
 
-static struct platform_driver i2c_multi_inst_driver = {
+static struct platform_driver bmi_driver = {
 	.driver	= {
-		.name = "I2C multi instantiate pseudo device driver",
-		.acpi_match_table = i2c_multi_inst_acpi_ids,
+		.name = "Bus multi instantiate pseudo device driver",
+		.acpi_match_table = bmi_acpi_ids,
 	},
-	.probe = i2c_multi_inst_probe,
-	.remove = i2c_multi_inst_remove,
+	.probe = bmi_probe,
+	.remove = bmi_remove,
 };
-module_platform_driver(i2c_multi_inst_driver);
+module_platform_driver(bmi_driver);
 
-MODULE_DESCRIPTION("I2C multi instantiate pseudo device driver");
+MODULE_DESCRIPTION("Bus multi instantiate pseudo device driver");
 MODULE_AUTHOR("Hans de Goede <[email protected]>");
 MODULE_LICENSE("GPL");

From: Lucas Tanure <[email protected]>

Reorganize I2C functions to accommodate SPI support Split the probe and factor out parts of the code that will be used in the SPI support

Signed-off-by Lucas Tanure <[email protected]>

Signed-off-by Stefan Binding <[email protected]>

---
 drivers/platform/x86/bus-multi-instantiate.c | 150 ++++++++++++-------
 1 file changed, 96 insertions(+), 54 deletions(-)

drivers/platform/x86/bus-multi-instantiate.c +41 -2

index 982dfecfd27c..50f1540762e9 100644
@@ -29,85 +29,129 @@ struct bmi_instance {
 
 struct bmi {
 	int i2c_num;
-	struct i2c_client *i2c_devs[];
+	struct i2c_client **i2c_devs;
 };
 
-static int bmi_probe(struct platform_device *pdev)
+static int bmi_get_irq(struct platform_device *pdev, struct acpi_device *adev,
+		       const struct bmi_instance *inst)
+{
+	int ret;
+
+	switch (inst->flags & IRQ_RESOURCE_TYPE) {
+	case IRQ_RESOURCE_GPIO:
+		ret = acpi_dev_gpio_irq_get(adev, inst->irq_idx);
+		break;
+	case IRQ_RESOURCE_APIC:
+		ret = platform_get_irq(pdev, inst->irq_idx);
+		break;
+	default:
+		ret = 0;
+		break;
+	}
+
+	if (ret < 0)
+		dev_err_probe(&pdev->dev, ret, "Error requesting irq at index %d: %d\n",
+			      inst->irq_idx, ret);
+
+	return ret;
+}
+
+static void bmi_devs_unregister(struct bmi *bmi)
+{
+	while (bmi->i2c_num > 0)
+		i2c_unregister_device(bmi->i2c_devs[--bmi->i2c_num]);
+}
+
+/**
+ * bmi_i2c_probe - Instantiate multiple I2C devices from inst array
+ * @pdev:	Platform device
+ * @adev:	ACPI device
+ * @bmi:	Internal struct for Bus multi instantiate driver
+ * @inst:	Array of instances to probe
+ *
+ * Returns the number of I2C devices instantiate, Zero if none is found or a negative error code.
+ */
+static int bmi_i2c_probe(struct platform_device *pdev, struct acpi_device *adev, struct bmi *bmi,

drivers/platform/x86/bus-multi-instantiate.c +15 -41

-	inst = device_get_match_data(dev);
-	if (!inst) {
-		dev_err(dev, "Error ACPI match data is missing\n");
-		return -ENODEV;
-	}
-
-	adev = ACPI_COMPANION(dev);
-
-	/* Count number of clients to instantiate */
 	ret = i2c_acpi_client_count(adev);
-	if (ret < 0)
+	if (ret <= 0)
 		return ret;
+	count = ret;
 
-	bmi = devm_kmalloc(dev, struct_size(bmi, i2c_devs, ret), GFP_KERNEL);
-	if (!bmi)
+	bmi->i2c_devs = devm_kcalloc(dev, count, sizeof(*bmi->i2c_devs), GFP_KERNEL);
+	if (!bmi->i2c_devs)
 		return -ENOMEM;
 
-	bmi->i2c_num = ret;
-
-	for (i = 0; i < bmi->i2c_num && inst[i].type; i++) {
+	for (i = 0; i < count && inst_array[i].type; i++) {
 		memset(&board_info, 0, sizeof(board_info));
-		strlcpy(board_info.type, inst[i].type, I2C_NAME_SIZE);
-		snprintf(name, sizeof(name), "%s-%s.%d", dev_name(dev), inst[i].type, i);
+		strscpy(board_info.type, inst_array[i].type, I2C_NAME_SIZE);
+		snprintf(name, sizeof(name), "%s-%s.%d", dev_name(dev), inst_array[i].type, i);
 		board_info.dev_name = name;
-		switch (inst[i].flags & IRQ_RESOURCE_TYPE) {
-		case IRQ_RESOURCE_GPIO:
-			ret = acpi_dev_gpio_irq_get(adev, inst[i].irq_idx);
-			if (ret < 0) {
-				dev_err(dev, "Error requesting irq at index %d: %d\n",
-						inst[i].irq_idx, ret);
-				goto error;
-			}
-			board_info.irq = ret;
-			break;
-		case IRQ_RESOURCE_APIC:
-			ret = platform_get_irq(pdev, inst[i].irq_idx);
-			if (ret < 0) {
-				dev_dbg(dev, "Error requesting irq at index %d: %d\n",
-					inst[i].irq_idx, ret);
-				goto error;
-			}
-			board_info.irq = ret;
-			break;
-		default:
-			board_info.irq = 0;
-			break;
-		}
+
+		ret = bmi_get_irq(pdev, adev, &inst_array[i]);
+		if (ret < 0)
+			goto error;
+		board_info.irq = ret;
+
 		bmi->i2c_devs[i] = i2c_acpi_new_device(dev, i, &board_info);
 		if (IS_ERR(bmi->i2c_devs[i])) {
 			ret = dev_err_probe(dev, PTR_ERR(bmi->i2c_devs[i]),
 					    "Error creating i2c-client, idx %d\n", i);
 			goto error;
 		}
+		bmi->i2c_num++;
 	}
-	if (i < bmi->i2c_num) {
+	if (bmi->i2c_num < count) {
 		dev_err(dev, "Error finding driver, idx %d\n", i);
 		ret = -ENODEV;
 		goto error;
 	}

drivers/platform/x86/bus-multi-instantiate.c +34 -0

+	bmi_devs_unregister(bmi);
+
+	return ret;
+}
+
+static int bmi_probe(struct platform_device *pdev)
+{
+	const struct bmi_instance *inst_array;
+	struct device *dev = &pdev->dev;
+	struct acpi_device *adev;
+	struct bmi *bmi;
+	int ret;
+
+	inst_array = device_get_match_data(dev);
+	if (!inst_array) {
+		dev_err(dev, "Error ACPI match data is missing\n");
+		return -ENODEV;
+	}
+
+	adev = ACPI_COMPANION(dev);
+	if (!adev)
+		return -ENODEV;
+
+	bmi = devm_kzalloc(dev, sizeof(*bmi), GFP_KERNEL);
+	if (!bmi)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, bmi);
+
+	ret = bmi_i2c_probe(pdev, adev, bmi, inst_array);
+	if (ret > 0)
+		return 0;
+	if (ret == 0)
+		ret = -ENODEV;
 
 	return ret;
 }

@@ -115,10 +159,8 @@ static int bmi_probe(struct platform_device *pdev)
 static int bmi_remove(struct platform_device *pdev)

From: Lucas Tanure <[email protected]>

Add support for two and four CS35L41 using the component binding method

Signed-off-by Lucas Tanure <[email protected]>

Signed-off-by Stefan Binding <[email protected]>

sound/pci/hda/patch_realtek.c +5 -0

+	SND_PCI_QUIRK(0x103c, 0x896E, "HP EliteBook x360 830 G9", ALC245_FIXUP_CS35L41_SPI_2),
+	SND_PCI_QUIRK(0x103c, 0x8971, "HP EliteBook 830 G9", ALC245_FIXUP_CS35L41_SPI_2),
+	SND_PCI_QUIRK(0x103c, 0x8972, "HP EliteBook 840 G9", ALC245_FIXUP_CS35L41_SPI_2),
+	SND_PCI_QUIRK(0x103c, 0x8973, "HP EliteBook 860 G9", ALC245_FIXUP_CS35L41_SPI_2),
+	SND_PCI_QUIRK(0x103c, 0x8974, "HP EliteBook 840 Aero G9", ALC245_FIXUP_CS35L41_SPI_2),

From: Lucas Tanure <[email protected]>

Reorganize I2C functions to accommodate SPI support Split the probe and factor out parts of the code that will be used in the SPI support

Signed-off-by Lucas Tanure <[email protected]>

Signed-off-by Stefan Binding <[email protected]>

---
 drivers/platform/x86/bus-multi-instantiate.c | 150 ++++++++++++-------
 1 file changed, 96 insertions(+), 54 deletions(-)

drivers/platform/x86/bus-multi-instantiate.c +57 -46

index 982dfecfd27c..50f1540762e9 100644
@@ -29,85 +29,129 @@ struct bmi_instance {
 
 struct bmi {
 	int i2c_num;
-	struct i2c_client *i2c_devs[];
+	struct i2c_client **i2c_devs;
 };
 
-static int bmi_probe(struct platform_device *pdev)
+static int bmi_get_irq(struct platform_device *pdev, struct acpi_device *adev,
+		       const struct bmi_instance *inst)
+{
+	int ret;
+
+	switch (inst->flags & IRQ_RESOURCE_TYPE) {
+	case IRQ_RESOURCE_GPIO:
+		ret = acpi_dev_gpio_irq_get(adev, inst->irq_idx);
+		break;
+	case IRQ_RESOURCE_APIC:
+		ret = platform_get_irq(pdev, inst->irq_idx);
+		break;
+	default:
+		ret = 0;
+		break;
+	}
+
+	if (ret < 0)
+		dev_err_probe(&pdev->dev, ret, "Error requesting irq at index %d: %d\n",
+			      inst->irq_idx, ret);
+
+	return ret;
+}
+
+static void bmi_devs_unregister(struct bmi *bmi)
+{
+	while (bmi->i2c_num > 0)
+		i2c_unregister_device(bmi->i2c_devs[--bmi->i2c_num]);
+}
+
+/**
+ * bmi_i2c_probe - Instantiate multiple I2C devices from inst array
+ * @pdev:	Platform device
+ * @adev:	ACPI device
+ * @bmi:	Internal struct for Bus multi instantiate driver
+ * @inst:	Array of instances to probe
+ *
+ * Returns the number of I2C devices instantiate, Zero if none is found or a negative error code.
+ */
+static int bmi_i2c_probe(struct platform_device *pdev, struct acpi_device *adev, struct bmi *bmi,
+			 const struct bmi_instance *inst_array)
 {
 	struct i2c_board_info board_info = {};
-	const struct bmi_instance *inst;
 	struct device *dev = &pdev->dev;
-	struct acpi_device *adev;
-	struct bmi *bmi;
 	char name[32];
-	int i, ret;
+	int i, ret = 0, count;
 
-	inst = device_get_match_data(dev);
-	if (!inst) {
-		dev_err(dev, "Error ACPI match data is missing\n");
-		return -ENODEV;
-	}
-
-	adev = ACPI_COMPANION(dev);
-
-	/* Count number of clients to instantiate */
 	ret = i2c_acpi_client_count(adev);
-	if (ret < 0)
+	if (ret <= 0)
 		return ret;
+	count = ret;
 
-	bmi = devm_kmalloc(dev, struct_size(bmi, i2c_devs, ret), GFP_KERNEL);
-	if (!bmi)
+	bmi->i2c_devs = devm_kcalloc(dev, count, sizeof(*bmi->i2c_devs), GFP_KERNEL);
+	if (!bmi->i2c_devs)
 		return -ENOMEM;
 
-	bmi->i2c_num = ret;
-
-	for (i = 0; i < bmi->i2c_num && inst[i].type; i++) {
+	for (i = 0; i < count && inst_array[i].type; i++) {
 		memset(&board_info, 0, sizeof(board_info));
-		strlcpy(board_info.type, inst[i].type, I2C_NAME_SIZE);
-		snprintf(name, sizeof(name), "%s-%s.%d", dev_name(dev), inst[i].type, i);
+		strscpy(board_info.type, inst_array[i].type, I2C_NAME_SIZE);
+		snprintf(name, sizeof(name), "%s-%s.%d", dev_name(dev), inst_array[i].type, i);
 		board_info.dev_name = name;
-		switch (inst[i].flags & IRQ_RESOURCE_TYPE) {
-		case IRQ_RESOURCE_GPIO:
-			ret = acpi_dev_gpio_irq_get(adev, inst[i].irq_idx);
-			if (ret < 0) {
-				dev_err(dev, "Error requesting irq at index %d: %d\n",
-						inst[i].irq_idx, ret);
-				goto error;
-			}
-			board_info.irq = ret;
-			break;
-		case IRQ_RESOURCE_APIC:
-			ret = platform_get_irq(pdev, inst[i].irq_idx);
-			if (ret < 0) {
-				dev_dbg(dev, "Error requesting irq at index %d: %d\n",
-					inst[i].irq_idx, ret);
-				goto error;
-			}
-			board_info.irq = ret;
-			break;
-		default:
-			board_info.irq = 0;
-			break;
-		}
+
+		ret = bmi_get_irq(pdev, adev, &inst_array[i]);
+		if (ret < 0)
+			goto error;
+		board_info.irq = ret;
+
 		bmi->i2c_devs[i] = i2c_acpi_new_device(dev, i, &board_info);
 		if (IS_ERR(bmi->i2c_devs[i])) {
 			ret = dev_err_probe(dev, PTR_ERR(bmi->i2c_devs[i]),
 					    "Error creating i2c-client, idx %d\n", i);
 			goto error;
 		}
+		bmi->i2c_num++;
 	}

drivers/platform/x86/bus-multi-instantiate.c +37 -5

+	return bmi->i2c_num;
 error:
-	while (--i >= 0)
-		i2c_unregister_device(bmi->i2c_devs[i]);
+	dev_err_probe(dev, ret, "I2C error %d\n", ret);
+	bmi_devs_unregister(bmi);
+
+	return ret;
+}
+
+static int bmi_probe(struct platform_device *pdev)
+{
+	const struct bmi_instance *inst_array;
+	struct device *dev = &pdev->dev;
+	struct acpi_device *adev;
+	struct bmi *bmi;
+	int ret;
+
+	inst_array = device_get_match_data(dev);
+	if (!inst_array) {
+		dev_err(dev, "Error ACPI match data is missing\n");
+		return -ENODEV;
+	}
+
+	adev = ACPI_COMPANION(dev);
+	if (!adev)
+		return -ENODEV;
+
+	bmi = devm_kzalloc(dev, sizeof(*bmi), GFP_KERNEL);
+	if (!bmi)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, bmi);
+
+	ret = bmi_i2c_probe(pdev, adev, bmi, inst_array);
+	if (ret > 0)
+		return 0;
+	if (ret == 0)
+		ret = -ENODEV;
 
 	return ret;
 }

@@ -115,10 +159,8 @@ static int bmi_probe(struct platform_device *pdev)
 static int bmi_remove(struct platform_device *pdev)
 {
 	struct bmi *bmi = platform_get_drvdata(pdev);
-	int i;
 
-	for (i = 0; i < bmi->i2c_num; i++)
-		i2c_unregister_device(bmi->i2c_devs[i]);
+	bmi_devs_unregister(bmi);
 
 	return 0;
 }

From: Lucas Tanure <[email protected]>

Reorganize I2C functions to accommodate SPI support Split the probe and factor out parts of the code that will be used in the SPI support

Signed-off-by Lucas Tanure <[email protected]>

Signed-off-by Stefan Binding <[email protected]>

---
 drivers/platform/x86/bus-multi-instantiate.c | 150 ++++++++++++-------
 1 file changed, 96 insertions(+), 54 deletions(-)

drivers/platform/x86/bus-multi-instantiate.c +43 -9

index 982dfecfd27c..50f1540762e9 100644
@@ -29,85 +29,129 @@ struct bmi_instance {
 
 struct bmi {
 	int i2c_num;
-	struct i2c_client *i2c_devs[];
+	struct i2c_client **i2c_devs;
 };
 
-static int bmi_probe(struct platform_device *pdev)
+static int bmi_get_irq(struct platform_device *pdev, struct acpi_device *adev,
+		       const struct bmi_instance *inst)
+{
+	int ret;
+
+	switch (inst->flags & IRQ_RESOURCE_TYPE) {
+	case IRQ_RESOURCE_GPIO:
+		ret = acpi_dev_gpio_irq_get(adev, inst->irq_idx);
+		break;
+	case IRQ_RESOURCE_APIC:
+		ret = platform_get_irq(pdev, inst->irq_idx);
+		break;
+	default:
+		ret = 0;
+		break;
+	}
+
+	if (ret < 0)
+		dev_err_probe(&pdev->dev, ret, "Error requesting irq at index %d: %d\n",
+			      inst->irq_idx, ret);
+
+	return ret;
+}
+
+static void bmi_devs_unregister(struct bmi *bmi)
+{
+	while (bmi->i2c_num > 0)
+		i2c_unregister_device(bmi->i2c_devs[--bmi->i2c_num]);
+}
+
+/**
+ * bmi_i2c_probe - Instantiate multiple I2C devices from inst array
+ * @pdev:	Platform device
+ * @adev:	ACPI device
+ * @bmi:	Internal struct for Bus multi instantiate driver
+ * @inst:	Array of instances to probe
+ *
+ * Returns the number of I2C devices instantiate, Zero if none is found or a negative error code.
+ */
+static int bmi_i2c_probe(struct platform_device *pdev, struct acpi_device *adev, struct bmi *bmi,
+			 const struct bmi_instance *inst_array)
 {
 	struct i2c_board_info board_info = {};
-	const struct bmi_instance *inst;
 	struct device *dev = &pdev->dev;
-	struct acpi_device *adev;
-	struct bmi *bmi;
 	char name[32];
-	int i, ret;
+	int i, ret = 0, count;
 
-	inst = device_get_match_data(dev);
-	if (!inst) {
-		dev_err(dev, "Error ACPI match data is missing\n");

drivers/platform/x86/bus-multi-instantiate.c +14 -31

+	count = ret;
 
-	bmi = devm_kmalloc(dev, struct_size(bmi, i2c_devs, ret), GFP_KERNEL);
-	if (!bmi)
+	bmi->i2c_devs = devm_kcalloc(dev, count, sizeof(*bmi->i2c_devs), GFP_KERNEL);
+	if (!bmi->i2c_devs)
 		return -ENOMEM;
 
-	bmi->i2c_num = ret;
-
-	for (i = 0; i < bmi->i2c_num && inst[i].type; i++) {
+	for (i = 0; i < count && inst_array[i].type; i++) {
 		memset(&board_info, 0, sizeof(board_info));
-		strlcpy(board_info.type, inst[i].type, I2C_NAME_SIZE);
-		snprintf(name, sizeof(name), "%s-%s.%d", dev_name(dev), inst[i].type, i);
+		strscpy(board_info.type, inst_array[i].type, I2C_NAME_SIZE);
+		snprintf(name, sizeof(name), "%s-%s.%d", dev_name(dev), inst_array[i].type, i);
 		board_info.dev_name = name;
-		switch (inst[i].flags & IRQ_RESOURCE_TYPE) {
-		case IRQ_RESOURCE_GPIO:
-			ret = acpi_dev_gpio_irq_get(adev, inst[i].irq_idx);
-			if (ret < 0) {
-				dev_err(dev, "Error requesting irq at index %d: %d\n",
-						inst[i].irq_idx, ret);
-				goto error;
-			}
-			board_info.irq = ret;
-			break;
-		case IRQ_RESOURCE_APIC:
-			ret = platform_get_irq(pdev, inst[i].irq_idx);
-			if (ret < 0) {
-				dev_dbg(dev, "Error requesting irq at index %d: %d\n",
-					inst[i].irq_idx, ret);
-				goto error;
-			}
-			board_info.irq = ret;
-			break;
-		default:
-			board_info.irq = 0;
-			break;
-		}
+
+		ret = bmi_get_irq(pdev, adev, &inst_array[i]);
+		if (ret < 0)
+			goto error;
+		board_info.irq = ret;
+
 		bmi->i2c_devs[i] = i2c_acpi_new_device(dev, i, &board_info);
 		if (IS_ERR(bmi->i2c_devs[i])) {
 			ret = dev_err_probe(dev, PTR_ERR(bmi->i2c_devs[i]),
 					    "Error creating i2c-client, idx %d\n", i);
 			goto error;
 		}
+		bmi->i2c_num++;
 	}
-	if (i < bmi->i2c_num) {
+	if (bmi->i2c_num < count) {

drivers/platform/x86/bus-multi-instantiate.c +27 -2

 error:
-	while (--i >= 0)
-		i2c_unregister_device(bmi->i2c_devs[i]);
+	dev_err_probe(dev, ret, "I2C error %d\n", ret);
+	bmi_devs_unregister(bmi);
+
+	return ret;
+}
+
+static int bmi_probe(struct platform_device *pdev)
+{
+	const struct bmi_instance *inst_array;
+	struct device *dev = &pdev->dev;
+	struct acpi_device *adev;
+	struct bmi *bmi;
+	int ret;
+
+	inst_array = device_get_match_data(dev);
+	if (!inst_array) {
+		dev_err(dev, "Error ACPI match data is missing\n");
+		return -ENODEV;
+	}
+
+	adev = ACPI_COMPANION(dev);
+	if (!adev)
+		return -ENODEV;
+
+	bmi = devm_kzalloc(dev, sizeof(*bmi), GFP_KERNEL);
+	if (!bmi)
+		return -ENOMEM;

drivers/platform/x86/bus-multi-instantiate.c +1 -3

 }

@@ -115,10 +159,8 @@ static int bmi_probe(struct platform_device *pdev)
 static int bmi_remove(struct platform_device *pdev)
 {
 	struct bmi *bmi = platform_get_drvdata(pdev);
-	int i;
 
-	for (i = 0; i < bmi->i2c_num; i++)
-		i2c_unregister_device(bmi->i2c_devs[i]);
+	bmi_devs_unregister(bmi);
 
 	return 0;
 }

Add support for spi bus in bus-multi-instantiate driver

Some peripherals can have either a I2C or a SPI connection to the host (but not both) but use the same HID for both types. So it is not possible to use the HID to determine whether it is I2C or SPI. The driver must check the node to see if it contains I2cSerialBus or SpiSerialBus entries.

For backwards-compatibility with the existing nodes I2C is checked first and if such entries are found ONLY I2C devices are created. Since some existing nodes that were already handled by this driver could also contain unrelated SpiSerialBus nodes that were previously ignored, and this preserves that behavior. If there is ever a need to handle a node where both I2C and SPI devices must be instantiated this can be added in future.

Signed-off-by Stefan Binding <[email protected]>

---
 drivers/acpi/scan.c                          |  13 +-
 drivers/platform/x86/Kconfig                 |  10 +-
 drivers/platform/x86/bus-multi-instantiate.c | 200 ++++++++++++++++---
 3 files changed, 182 insertions(+), 41 deletions(-)

drivers/acpi/scan.c +7 -6

index e4fda14572e7..4fd1346d6e1f 100644
@@ -1734,12 +1734,13 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device)
 	bool is_serial_bus_slave = false;
 	static const struct acpi_device_id ignore_serial_bus_ids[] = {
 	/*
-	 * These devices have multiple I2cSerialBus resources and an i2c-client
-	 * must be instantiated for each, each with its own i2c_device_id.
-	 * Normally we only instantiate an i2c-client for the first resource,
-	 * using the ACPI HID as id. These special cases are handled by the
-	 * drivers/platform/x86/bus-multi-instantiate.c driver, which knows
-	 * which i2c_device_id to use for each resource.
+	 * These devices have multiple I2cSerialBus/SpiSerialBus resources
+	 * and an (i2c/spi)-client must be instantiated for each, each with
+	 * its own i2c_device_id/spi_device_id.
+	 * Normally we only instantiate an (i2c/spi)-client for the first
+	 * resource, using the ACPI HID as id. These special cases are handled
+	 * by the drivers/platform/x86/bus-multi-instantiate.c driver, which
+	 * knows which i2c_device_id or spi_device_id to use for each resource.
 	 */
 		{"BSG1160", },
 		{"BSG2150", },

drivers/platform/x86/Kconfig +5 -5

index 616da06aa6b9..7b49d9d1e267 100644
@@ -991,12 +991,12 @@ config TOPSTAR_LAPTOP
 	  If you have a Topstar laptop, say Y or M here.
 
 config BUS_MULTI_INSTANTIATE
-	tristate "I2C multi instantiate pseudo device driver"
-	depends on I2C && ACPI
+	tristate "I2C and SPI multi instantiate pseudo device driver"
+	depends on I2C && SPI && ACPI
 	help
-	  Some ACPI-based systems list multiple i2c-devices in a single ACPI
-	  firmware-node. This driver will instantiate separate i2c-clients
-	  for each device in the firmware-node.
+	  Some ACPI-based systems list multiple i2c/spi devices in a
+	  single ACPI firmware-node. This driver will instantiate separate
+	  i2c-clients or spi-devices for each device in the firmware-node.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called bus-multi-instantiate.

drivers/platform/x86/bus-multi-instantiate.c +31 -1

index 50f1540762e9..05bc941a38fd 100644
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Bus multi-instantiate driver, pseudo driver to instantiate multiple
- * i2c-clients from a single fwnode.
+ * i2c-clients or spi-devices from a single fwnode.
  *
  * Copyright 2018 Hans de Goede <[email protected]>
  */

@@ -14,6 +14,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
+#include <linux/spi/spi.h>
 #include <linux/types.h>
 
 #define IRQ_RESOURCE_TYPE	GENMASK(1, 0)

@@ -21,15 +22,28 @@
 #define IRQ_RESOURCE_GPIO	1
 #define IRQ_RESOURCE_APIC	2
 
+enum bmi_bus_type {
+	BMI_I2C,
+	BMI_SPI,
+	BMI_AUTO_DETECT,
+};
+
 struct bmi_instance {
 	const char *type;
 	unsigned int flags;
 	int irq_idx;
 };
 
+struct bmi_node {
+	enum bmi_bus_type bus_type;
+	struct bmi_instance instances[];
+};
+
 struct bmi {
 	int i2c_num;
+	int spi_num;
 	struct i2c_client **i2c_devs;
+	struct spi_device **spi_devs;
 };
 
 static int bmi_get_irq(struct platform_device *pdev, struct acpi_device *adev,

@@ -60,6 +74,92 @@ static void bmi_devs_unregister(struct bmi *bmi)
 {
 	while (bmi->i2c_num > 0)
 		i2c_unregister_device(bmi->i2c_devs[--bmi->i2c_num]);
+
+	while (bmi->spi_num > 0)
+		spi_unregister_device(bmi->spi_devs[--bmi->spi_num]);
+}
+
+/**
+ * bmi_spi_probe - Instantiate multiple SPI devices from inst array
+ * @pdev:	Platform device
+ * @adev:	ACPI device
+ * @bmi:	Internal struct for Bus multi instantiate driver
+ * @inst:	Array of instances to probe
+ *
+ * Returns the number of SPI devices instantiate, Zero if none is found or a negative error code.
+ */
+static int bmi_spi_probe(struct platform_device *pdev, struct acpi_device *adev, struct bmi *bmi,
+			 const struct bmi_instance *inst_array)

drivers/platform/x86/bus-multi-instantiate.c +23 -0

+			ret = bmi_get_irq(pdev, adev, &inst_array[i]);
+			if (ret < 0) {
+				spi_dev_put(spi_dev);
+				goto error;
+			}
+			spi_dev->irq = ret;
+		}
+
+		snprintf(name, sizeof(name), "%s-%s-%s.%d", dev_name(&ctlr->dev), dev_name(dev),
+			 inst_array[i].type, i);
+		spi_dev->dev.init_name = name;
+
+		ret = spi_add_device(spi_dev);
+		if (ret) {
+			dev_err(&ctlr->dev, "failed to add SPI device %s from ACPI: %d\n",
+				dev_name(&adev->dev), ret);
+			spi_dev_put(spi_dev);
+			goto error;
+		}
+
+		dev_dbg(dev, "SPI device %s using chip select %u", name, spi_dev->chip_select);
+
+		bmi->spi_devs[i] = spi_dev;

drivers/platform/x86/bus-multi-instantiate.c +35 -8

+
+	return ret;
+
 }
 
 /**

@@ -125,14 +225,14 @@ static int bmi_i2c_probe(struct platform_device *pdev, struct acpi_device *adev,
 
 static int bmi_probe(struct platform_device *pdev)
 {
-	const struct bmi_instance *inst_array;
 	struct device *dev = &pdev->dev;
+	const struct bmi_node *node;
 	struct acpi_device *adev;
 	struct bmi *bmi;
-	int ret;
+	int i2c_ret = 0, spi_ret = 0;
 
-	inst_array = device_get_match_data(dev);
-	if (!inst_array) {
+	node = device_get_match_data(dev);
+	if (!node) {
 		dev_err(dev, "Error ACPI match data is missing\n");
 		return -ENODEV;
 	}

@@ -147,13 +247,44 @@ static int bmi_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, bmi);
 
-	ret = bmi_i2c_probe(pdev, adev, bmi, inst_array);
-	if (ret > 0)
+	/* Each time this driver probes only one type of bus will be chosen.
+	 * And I2C has preference, which means that if find a I2cSerialBus it assumes
+	 * that all following devices will also be I2C.
+	 * In case there are zero I2C devices, it assumes that all following devices are SPI.
+	 */
+	if (node->bus_type != BMI_SPI) {
+		i2c_ret = bmi_i2c_probe(pdev, adev, bmi, node->instances);
+		if (i2c_ret > 0)
+			return 0;
+		else if (i2c_ret == -EPROBE_DEFER)
+			return i2c_ret;
+		if (node->bus_type == BMI_I2C) {
+			if (i2c_ret == 0)
+				return -ENODEV;
+			else
+				return i2c_ret;
+		}
+	}
+	/* BMI_SPI or BMI_AUTO_DETECT */
+	spi_ret = bmi_spi_probe(pdev, adev, bmi, node->instances);
+	if (spi_ret > 0)
 		return 0;
-	if (ret == 0)
-		ret = -ENODEV;
+	else if (spi_ret == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+	if (node->bus_type == BMI_SPI) {
+		if (spi_ret == 0)
+			return -ENODEV;
+		else
+			return spi_ret;

drivers/platform/x86/bus-multi-instantiate.c +26 -17

 static int bmi_remove(struct platform_device *pdev)

@@ -165,27 +296,36 @@ static int bmi_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct bmi_instance bsg1160_data[]  = {
-	{ "bmc150_accel", IRQ_RESOURCE_GPIO, 0 },
-	{ "bmc150_magn" },
-	{ "bmg160" },
-	{}
+static const struct bmi_node bsg1160_data = {
+	.instances = {
+		{ "bmc150_accel", IRQ_RESOURCE_GPIO, 0 },
+		{ "bmc150_magn" },
+		{ "bmg160" },
+		{}
+	},
+	.bus_type = BMI_I2C,
 };
 
-static const struct bmi_instance bsg2150_data[]  = {
-	{ "bmc150_accel", IRQ_RESOURCE_GPIO, 0 },
-	{ "bmc150_magn" },
-	/* The resources describe a 3th client, but it is not really there. */
-	{ "bsg2150_dummy_dev" },
-	{}
+static const struct bmi_node bsg2150_data = {
+	.instances = {
+		{ "bmc150_accel", IRQ_RESOURCE_GPIO, 0 },
+		{ "bmc150_magn" },
+		/* The resources describe a 3th client, but it is not really there. */
+		{ "bsg2150_dummy_dev" },
+		{}
+	},
+	.bus_type = BMI_I2C,
 };
 
-static const struct bmi_instance int3515_data[]  = {
-	{ "tps6598x", IRQ_RESOURCE_APIC, 0 },
-	{ "tps6598x", IRQ_RESOURCE_APIC, 1 },
-	{ "tps6598x", IRQ_RESOURCE_APIC, 2 },
-	{ "tps6598x", IRQ_RESOURCE_APIC, 3 },
-	{}
+static const struct bmi_node int3515_data = {
+	.instances = {
+		{ "tps6598x", IRQ_RESOURCE_APIC, 0 },
+		{ "tps6598x", IRQ_RESOURCE_APIC, 1 },
+		{ "tps6598x", IRQ_RESOURCE_APIC, 2 },
+		{ "tps6598x", IRQ_RESOURCE_APIC, 3 },
+		{}
+	},
+	.bus_type = BMI_I2C,
 };
 
 /*

@@ -193,9 +333,9 @@ static const struct bmi_instance int3515_data[]  = {
  * drivers/acpi/scan.c: acpi_device_enumeration_by_parent().
  */

From: Lucas Tanure <[email protected]>

The ACPI device with CSC3551 or CLSA0100 are sound cards with multiple instances of CS35L41 connectec by I2C or SPI to the main CPU.

We add an ID to the ignore_serial_bus_ids list to enumerate all I2C or SPI devices correctly.

Signed-off-by Lucas Tanure <[email protected]>

Signed-off-by Stefan Binding <[email protected]>

---
 drivers/acpi/scan.c                          |  3 +++
 drivers/platform/x86/bus-multi-instantiate.c | 14 ++++++++++++++
 2 files changed, 17 insertions(+)

drivers/acpi/scan.c +3 -0

index 4fd1346d6e1f..2f2210c969c8 100644
@@ -1744,8 +1744,11 @@ static bool acpi_device_enumeration_by_parent(struct acpi_device *device)
 	 */
 		{"BSG1160", },
 		{"BSG2150", },
+		{"CSC3551", },
 		{"INT33FE", },
 		{"INT3515", },
+	/* Non-conforming _HID for Cirrus Logic already released */
+		{"CLSA0100", },
 	/*
 	 * HIDs of device with an UartSerialBusV2 resource for which userspace
 	 * expects a regular tty cdev to be created (instead of the in kernel

drivers/platform/x86/bus-multi-instantiate.c +14 -0

index 05bc941a38fd..7a394b671f5a 100644
@@ -328,6 +328,17 @@ static const struct bmi_node int3515_data = {
 	.bus_type = BMI_I2C,
 };
 
+static const struct bmi_node cs35l41_hda = {
+	.instances = {
+		{ "cs35l41-hda", IRQ_RESOURCE_GPIO, 0 },
+		{ "cs35l41-hda", IRQ_RESOURCE_GPIO, 0 },
+		{ "cs35l41-hda", IRQ_RESOURCE_GPIO, 0 },
+		{ "cs35l41-hda", IRQ_RESOURCE_GPIO, 0 },
+		{}
+	},
+	.bus_type = BMI_AUTO_DETECT,
+};
+
 /*
  * Note new device-ids must also be added to bus_multi_instantiate_ids in
  * drivers/acpi/scan.c: acpi_device_enumeration_by_parent().

@@ -336,6 +347,9 @@ static const struct acpi_device_id bmi_acpi_ids[] = {
 	{ "BSG1160", (unsigned long)&bsg1160_data },
 	{ "BSG2150", (unsigned long)&bsg2150_data },
 	{ "INT3515", (unsigned long)&int3515_data },
+	{ "CSC3551", (unsigned long)&cs35l41_hda },
+	/* Non-conforming _HID for Cirrus Logic already released */
+	{ "CLSA0100", (unsigned long)&cs35l41_hda },
 	{ }
 };
 MODULE_DEVICE_TABLE(acpi, bmi_acpi_ids);

Add support for SPI bus in the i2c-multi-instantiate driver as upcoming laptops will need to multi instantiate SPI devices from a single device node, which has multiple SpiSerialBus entries at the ACPI table.

With the new SPI support, i2c-multi-instantiate becomes bus-multi-instantiate and is moved to the ACPI folder.

The intention is to support the SPI bus by re-using the current I2C multi instantiate, instead of creating a new SPI multi instantiate, to make it possible for peripherals that can be controlled by I2C or SPI to have the same HID at the ACPI table.

The new driver (Bus multi instantiate, bmi) checks for the hard-coded bus type and returns -ENODEV in case of zero devices found for that bus. In the case of automatic bus detection, the driver will give preference to I2C.

The expectation is for a device node in the ACPI table to have multiple I2cSerialBus only or multiple SpiSerialBus only, not a mix of both; and for the case where there are both entries in one device node, only the I2C ones would be probed.

This new bus multi instantiate will be used in CS35L41 HDA new driver.

Changes since V2:
- Moved bus-multi-instantiate back into platform/x86

Lucas Tanure (4):
platform/x86: i2c-multi-instantiate: Rename it for a generic bus
driver name
platform/x86: bus-multi-instantiate: Reorganize I2C functions
ALSA: hda/realtek: Add support for HP Laptops
ACPI / scan: Create platform device for CS35L41

Stefan Binding (5):
spi: Make spi_alloc_device and spi_add_device public again
spi: Create helper API to lookup ACPI info for spi device
spi: Support selection of the index of the ACPI Spi Resource before
alloc
spi: Add API to count spi acpi resources
platform/x86: bus-multi-instantiate: Add SPI support

 MAINTAINERS                                  |   4 +-
 drivers/acpi/scan.c                          |  16 +-
 drivers/platform/x86/Kconfig                 |  14 +-
 drivers/platform/x86/Makefile                |   2 +-
 drivers/platform/x86/bus-multi-instantiate.c | 369 +++++++++++++++++++
 drivers/platform/x86/i2c-multi-instantiate.c | 174 ---------
 drivers/spi/spi.c                            | 142 ++++++-
 include/linux/spi/spi.h                      |  32 ++
 sound/pci/hda/patch_realtek.c                |  43 ++-
 9 files changed, 588 insertions(+), 208 deletions(-)
 create mode 100644 drivers/platform/x86/bus-multi-instantiate.c
 delete mode 100644 drivers/platform/x86/i2c-multi-instantiate.c

From: Lucas Tanure <[email protected]>

Rename I2C multi instantiate driver to bus-multi-instantiate for upcoming addition of SPI support

Quoted 5 lines · Stefan Binding

From: Lucas Tanure <[email protected]>

Rename I2C multi instantiate driver to bus-multi-instantiate for upcoming addition of SPI support

TBH, I don't particularly like the new naming.

Namely, the "bus" part seems overly generic (and the "bmi" abbreviation brings something totally different to mind).

AFAICS this can cover serial interfaces only and specifically the ones where serial links can be represented as resources returned by the ACPI _CRS object.

I would call it serial-multi-instance or similar.

-----Original Message-----
From: Alsa-devel <[email protected]> On Behalf Of Takashi Iwai
Sent: 20 January 2022 15:27
To: Stefan Binding <[email protected]>
Cc: [email protected]; [email protected];

[email protected]; Lucas Tanure <[email protected]>; Rafael J . Wysocki <[email protected]>; [email protected]; Takashi Iwai <[email protected]>; Mark Gross <[email protected]>; Hans de Goede <[email protected]>; Mark Brown <[email protected]>; [email protected]; [email protected]; Len Brown <[email protected]>
Subject: Re: [PATCH v4 8/9] ALSA: hda/realtek: Add support for HP Laptops

Quoted 6 lines · Stefan Binding

From: Lucas Tanure <[email protected]>

Add support for two and four CS35L41 using the component binding method

Quoted 2 lines

Signed-off-by Lucas Tanure <[email protected]>

Signed-off-by Stefan Binding <[email protected]>

I guess this patch won't be applicable until ACPI or other tree syncs with the latest Linus tree or sound git tree. Must this patch be merged with other patches?

Hi Takashi,

Quoted 6 lines

-----Original Message-----
From: Alsa-devel <[email protected]> On Behalf Of Takashi Iwai
Sent: 20 January 2022 15:27
To: Stefan Binding <[email protected]>
Cc: [email protected]; [email protected];

linux-

Quoted 19 lines

[email protected]; Lucas Tanure <[email protected]>; Rafael J . Wysocki <[email protected]>; [email protected]; Takashi Iwai <[email protected]>; Mark Gross <[email protected]>; Hans de Goede <[email protected]>; Mark Brown <[email protected]>; [email protected]; [email protected]; Len Brown <[email protected]>
Subject: Re: [PATCH v4 8/9] ALSA: hda/realtek: Add support for HP Laptops

Quoted 8 lines · Stefan Binding

From: Lucas Tanure <[email protected]>

Add support for two and four CS35L41 using the component binding method

Signed-off-by Lucas Tanure <[email protected]>

Signed-off-by Stefan Binding <[email protected]>

Quoted 3 lines

I guess this patch won't be applicable until ACPI or other tree syncs with the latest Linus tree or sound git tree. Must this patch be merged with other patches?

In order for these laptops to work correctly, it will need all of the patches merged,
including both this change and the ACPI changes - without the ACPI changes, some of the amps will not probe.