scsi: print actual pointer addresses if using scsi debug logging
Subsystems (2)
PATCH 1/1 scsi: print actual pointer addresses if using scsi debug logging
Since commit ad67b74d2469 ("printk: hash addresses printed with %p"), any addresses printed with an unadorned %p will be hashed. However, when scsi debug logging is enabled, in general, the user needs the actual address for use with address tracking or vmcore analysis. Print the actual address for pointers when using the SCSI_LOG_* macros.
Collab-from: David Jeffery <[email protected]>
--- drivers/scsi/scsi.c | 2 +- drivers/scsi/scsi_lib.c | 2 +- drivers/scsi/sg.c | 8 ++++---- drivers/scsi/sr.c | 2 +- 4 files changed, 7 insertions(+), 7 deletions(-)
drivers/scsi/scsi.c +1 -1
@@ -106,7 +106,7 @@ void scsi_log_send(struct scsi_cmnd *cmd) SCSI_LOG_MLQUEUE_BITS);if (level >1 ) {scmd_printk (KERN_INFO , cmd, -"Send: scmd 0x%p\n" , cmd); +"Send: scmd 0x%px\n" , cmd);scsi_print_command (cmd); } }
drivers/scsi/scsi_lib.c +1 -1
@@ -148,7 +148,7 @@ static void __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, bool unbusy)struct scsi_device *device = cmd->device;SCSI_LOG_MLQUEUE (1 ,scmd_printk (KERN_INFO , cmd, -"Inserting command %p into mlqueue\n" , cmd)); +"Inserting command %px into mlqueue\n" , cmd));scsi_set_blocked (cmd, reason);
drivers/scsi/sg.c +4 -4
@@ -1274,7 +1274,7 @@ sg_mmap(struct file *filp, struct vm_area_struct *vma)return -ENXIO ; req_sz = vma->vm_end - vma->vm_start;SCSI_LOG_TIMEOUT (3 ,sg_printk (KERN_INFO , sfp->parentdp, -"sg_mmap starting, vm_start=%p, len=%d\n" , +"sg_mmap starting, vm_start=%px, len=%d\n" , (void *) vma->vm_start, (int ) req_sz));if (vma->vm_pgoff)return -EINVAL ;/* want no offset */
@@ -1944,7 +1944,7 @@ sg_remove_scat(Sg_fd * sfp, Sg_scatter_hold * schp)for (k =0 ; k < schp->k_use_sg && schp->pages[k]; k++) {SCSI_LOG_TIMEOUT (5 ,sg_printk (KERN_INFO , sfp->parentdp, -"sg_remove_scat: k=%d, pg=0x%p\n" , +"sg_remove_scat: k=%d, pg=0x%px\n" , k, schp->pages[k]));__free_pages (schp->pages[k], schp->page_order); }
@@ -2156,7 +2156,7 @@ sg_add_sfp(Sg_device * sdp)list_add_tail (&sfp->sfd_siblings, &sdp->sfds);write_unlock_irqrestore (&sdp->sfd_lock, iflags);SCSI_LOG_TIMEOUT (3 ,sg_printk (KERN_INFO , sdp, -"sg_add_sfp: sfp=0x%p\n" , sfp)); +"sg_add_sfp: sfp=0x%px\n" , sfp));if (unlikely (sg_big_buff != def_reserved_size)) sg_big_buff = def_reserved_size;
@@ -2200,7 +2200,7 @@ sg_remove_sfp_usercontext(struct work_struct *work) }SCSI_LOG_TIMEOUT (6 ,sg_printk (KERN_INFO , sdp, -"sg_remove_sfp: sfp=0x%p\n" , sfp)); +"sg_remove_sfp: sfp=0x%px\n" , sfp));kfree (sfp);scsi_device_put (sdp->device);
drivers/scsi/sr.c +1 -1
@@ -411,7 +411,7 @@ static blk_status_t sr_init_command(struct scsi_cmnd *SCpnt)SCSI_LOG_HLQUEUE (2 ,scmd_printk (KERN_INFO , SCpnt,"Finishing %u sectors\n" ,blk_rq_sectors (rq)));SCSI_LOG_HLQUEUE (2 ,scmd_printk (KERN_INFO , SCpnt, -"Retry with 0x%p\n" , SCpnt)); +"Retry with 0x%px\n" , SCpnt)); goto out; }
Signature · 1 line
2.17.2
Quoted 6 lines · John Pittman
Since commit
ad67b74d2469("printk: hash addresses printed with %p"), any addresses printed with an unadorned %p will be hashed. However, when scsi debug logging is enabled, in general, the user needs the actual address for use with address tracking or vmcore analysis. Print the actual address for pointers when using the SCSI_LOG_* macros.
While scsi_logging_level defaults to 0, i.e. all disabled, and it requires root privileges to increase it, I wonder how unconditionally unmodified addresses for scsi logging would relate to KASLR.
Why not have the root user use no_hash_pointers with the existing plain pointers %p when setting scsi_logging_level?
That way, it would be a clear and deliberate unhashing choice to be done by higher powers.
Is it because changing no_hash_pointers does not seem dynamic as opposed to changing scsi_logging_level? I could not find such info in the patch description. Or would you delegate user access control to unmodified addresses in scsi logging kernel messages to https://www.kernel.org/doc/html/latest/admin-guide/sysctl/kernel.html#dmesg-restrict ?
While still not being unambiguous, I often try to use the CDB for correlation of scsi logs with pending (request) objects in a crash dump. Would that be an alternative to pointers? AFAIK, with scsi_cmnd being re-used, the pointers are
not unique for a particular request as time progresses.
Enabling SCSI tracepoints on top can also be useful.
References
https://www.kernel.org/doc/html/latest/core-api/printk-formats.html#plain-pointers
"If not possible, and the aim of printing the address is to provide more information for debugging, use %p and boot the kernel with the no_hash_pointers parameter during debugging, which will print all %p addresses unmodified."
https://www.kernel.org/doc/html/latest/core-api/printk-formats.html#unmodified-addresses
"Before using %px, consider if using %p is sufficient together with enabling the no_hash_pointers kernel parameter during debugging sessions"
Quoted 89 lines
Signed-off-by John Pittman <[email protected]>Collab-from: David Jeffery <[email protected]>
--- drivers/scsi/scsi.c | 2 +- drivers/scsi/scsi_lib.c | 2 +- drivers/scsi/sg.c | 8 ++++---- drivers/scsi/sr.c | 2 +- 4 files changed, 7 insertions(+), 7 deletions(-)drivers/scsi/scsi.c +1
-1@@ -106,7 +106,7 @@ void scsi_log_send(struct scsi_cmnd *cmd) SCSI_LOG_MLQUEUE_BITS);if (level >1 ) {scmd_printk (KERN_INFO , cmd, -"Send: scmd 0x%p\n" , cmd); +"Send: scmd 0x%px\n" , cmd);scsi_print_command (cmd); } }drivers/scsi/scsi_lib.c +1
-1@@ -148,7 +148,7 @@ static void __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, bool unbusy)struct scsi_device *device = cmd->device;SCSI_LOG_MLQUEUE (1 ,scmd_printk (KERN_INFO , cmd, -"Inserting command %p into mlqueue\n" , cmd)); +"Inserting command %px into mlqueue\n" , cmd));scsi_set_blocked (cmd, reason);drivers/scsi/sg.c +4
-4@@ -1274,7 +1274,7 @@ sg_mmap(struct file *filp, struct vm_area_struct *vma)return -ENXIO ; req_sz = vma->vm_end - vma->vm_start;SCSI_LOG_TIMEOUT (3 ,sg_printk (KERN_INFO , sfp->parentdp, -"sg_mmap starting, vm_start=%p, len=%d\n" , +"sg_mmap starting, vm_start=%px, len=%d\n" , (void *) vma->vm_start, (int ) req_sz));if (vma->vm_pgoff)return -EINVAL ;/* want no offset */ @@ -1944,7 +1944,7 @@ sg_remove_scat(Sg_fd * sfp, Sg_scatter_hold * schp)for (k =0 ; k < schp->k_use_sg && schp->pages[k]; k++) {SCSI_LOG_TIMEOUT (5 ,sg_printk (KERN_INFO , sfp->parentdp, -"sg_remove_scat: k=%d, pg=0x%p\n" , +"sg_remove_scat: k=%d, pg=0x%px\n" , k, schp->pages[k]));__free_pages (schp->pages[k], schp->page_order); }@@ -2156,7 +2156,7 @@ sg_add_sfp(Sg_device * sdp)list_add_tail (&sfp->sfd_siblings, &sdp->sfds);write_unlock_irqrestore (&sdp->sfd_lock, iflags);SCSI_LOG_TIMEOUT (3 ,sg_printk (KERN_INFO , sdp, -"sg_add_sfp: sfp=0x%p\n" , sfp)); +"sg_add_sfp: sfp=0x%px\n" , sfp));if (unlikely (sg_big_buff != def_reserved_size)) sg_big_buff = def_reserved_size;@@ -2200,7 +2200,7 @@ sg_remove_sfp_usercontext(struct work_struct *work) }SCSI_LOG_TIMEOUT (6 ,sg_printk (KERN_INFO , sdp, -"sg_remove_sfp: sfp=0x%p\n" , sfp)); +"sg_remove_sfp: sfp=0x%px\n" , sfp));kfree (sfp);scsi_device_put (sdp->device);drivers/scsi/sr.c +1
-1@@ -411,7 +411,7 @@ static blk_status_t sr_init_command(struct scsi_cmnd *SCpnt)SCSI_LOG_HLQUEUE (2 ,scmd_printk (KERN_INFO , SCpnt,"Finishing %u sectors\n" ,blk_rq_sectors (rq)));SCSI_LOG_HLQUEUE (2 ,scmd_printk (KERN_INFO , SCpnt, -"Retry with 0x%p\n" , SCpnt)); +"Retry with 0x%px\n" , SCpnt)); goto out; }
Signature · 11 lines
Mit freundlichen Gruessen / Kind regards Steffen Maier Linux on IBM Z and LinuxONE https://www.ibm.com/privacy/us/en/ IBM Deutschland Research & Development GmbH Vorsitzender des Aufsichtsrats: Gregor Pillen Geschaeftsfuehrung: David Faller, Dirk Wittkopp Sitz der Gesellschaft: Boeblingen Registergericht: Amtsgericht Stuttgart, HRB 243294
Thanks for looking Steffen. I failed to notice the no_hash_pointers option. I do think it would be a reasonable convenience for debug scsi logging to print the actual address without having to go through the trouble of rebooting enabling the no_hash_pointers parameter then rebooting again to disable afterward. Perhaps the system is a production box that can't be rebooted. Maybe an additional sysctl to enable no_hash_pointers would be reasonable? That way it could be changed online? Thanks again.
Quoted 145 lines · Steffen Maier
Quoted 6 lines · John Pittman
Since commit
ad67b74d2469("printk: hash addresses printed with %p"), any addresses printed with an unadorned %p will be hashed. However, when scsi debug logging is enabled, in general, the user needs the actual address for use with address tracking or vmcore analysis. Print the actual address for pointers when using the SCSI_LOG_* macros.While
scsi_logging_leveldefaults to 0, i.e. all disabled, and it requires root privileges to increase it, I wonder how unconditionally unmodified addresses for scsi logging would relate to KASLR.Why not have the root user use
no_hash_pointerswith the existing plain pointers %p when settingscsi_logging_level?
That way, it would be a clear and deliberate unhashing choice to be done by higher powers.
Is it because changingno_hash_pointersdoes not seem dynamic as opposed to changingscsi_logging_level? I could not find such info in the patch description. Or would you delegate user access control to unmodified addresses in scsi logging kernel messages to
https://www.kernel.org/doc/html/latest/admin-guide/sysctl/kernel.html#dmesg-restrict
?While still not being unambiguous, I often try to use the CDB for correlation of scsi logs with pending (request) objects in a crash dump. Would that be an alternative to pointers? AFAIK, with
scsi_cmndbeing re-used, the pointers are
not unique for a particular request as time progresses.
Enabling SCSI tracepoints on top can also be useful.References
https://www.kernel.org/doc/html/latest/core-api/printk-formats.html#plain-pointers
"If not possible, and the aim of printing the address is to provide more information for debugging, use %p and boot the kernel with theno_hash_pointersparameter during debugging, which will print all %p addresses unmodified."https://www.kernel.org/doc/html/latest/core-api/printk-formats.html#unmodified-addresses
"Before using %px, consider if using %p is sufficient together with enabling theno_hash_pointerskernel parameter during debugging sessions"Quoted 81 lines
Signed-off-by John Pittman <[email protected]>Collab-from: David Jeffery <[email protected]>
--- drivers/scsi/scsi.c | 2 +- drivers/scsi/scsi_lib.c | 2 +- drivers/scsi/sg.c | 8 ++++---- drivers/scsi/sr.c | 2 +- 4 files changed, 7 insertions(+), 7 deletions(-)drivers/scsi/scsi.c +1
-1@@ -106,7 +106,7 @@ void scsi_log_send(struct scsi_cmnd *cmd) SCSI_LOG_MLQUEUE_BITS);if (level >1 ) {scmd_printk (KERN_INFO , cmd, -"Send: scmd 0x%p\n" , cmd); +"Send: scmd 0x%px\n" , cmd);scsi_print_command (cmd); } }drivers/scsi/scsi_lib.c +1
-1@@ -148,7 +148,7 @@ static void __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, bool unbusy)struct scsi_device *device = cmd->device;SCSI_LOG_MLQUEUE (1 ,scmd_printk (KERN_INFO , cmd, -"Inserting command %p into mlqueue\n" , cmd)); +"Inserting command %px into mlqueue\n" , cmd));scsi_set_blocked (cmd, reason);drivers/scsi/sg.c +4
-4@@ -1274,7 +1274,7 @@ sg_mmap(struct file *filp, struct vm_area_struct *vma)return -ENXIO ; req_sz = vma->vm_end - vma->vm_start;SCSI_LOG_TIMEOUT (3 ,sg_printk (KERN_INFO , sfp->parentdp, -"sg_mmap starting, vm_start=%p, len=%d\n" , +"sg_mmap starting, vm_start=%px, len=%d\n" , (void *) vma->vm_start, (int ) req_sz));if (vma->vm_pgoff)return -EINVAL ;/* want no offset */ @@ -1944,7 +1944,7 @@ sg_remove_scat(Sg_fd * sfp, Sg_scatter_hold * schp)for (k =0 ; k < schp->k_use_sg && schp->pages[k]; k++) {SCSI_LOG_TIMEOUT (5 ,sg_printk (KERN_INFO , sfp->parentdp, -"sg_remove_scat: k=%d, pg=0x%p\n" , +"sg_remove_scat: k=%d, pg=0x%px\n" , k, schp->pages[k]));__free_pages (schp->pages[k], schp->page_order); }@@ -2156,7 +2156,7 @@ sg_add_sfp(Sg_device * sdp)list_add_tail (&sfp->sfd_siblings, &sdp->sfds);write_unlock_irqrestore (&sdp->sfd_lock, iflags);SCSI_LOG_TIMEOUT (3 ,sg_printk (KERN_INFO , sdp, -"sg_add_sfp: sfp=0x%p\n" , sfp)); +"sg_add_sfp: sfp=0x%px\n" , sfp));if (unlikely (sg_big_buff != def_reserved_size)) sg_big_buff = def_reserved_size;@@ -2200,7 +2200,7 @@ sg_remove_sfp_usercontext(struct work_struct *work) }SCSI_LOG_TIMEOUT (6 ,sg_printk (KERN_INFO , sdp, -"sg_remove_sfp: sfp=0x%p\n" , sfp)); +"sg_remove_sfp: sfp=0x%px\n" , sfp));kfree (sfp);scsi_device_put (sdp->device);drivers/scsi/sr.c +0
-0drivers/scsi/sr.c static blk_status_t sr_init_command(struct scsi_cmnd *SCpnt) · line 417
Quoted 8 lines
drivers/scsi/sr.c +1
-1@@ -411,7 +411,7 @@ static blk_status_t sr_init_command(struct scsi_cmnd *SCpnt)SCSI_LOG_HLQUEUE (2 ,scmd_printk (KERN_INFO , SCpnt,"Finishing %u sectors\n" ,blk_rq_sectors (rq)));SCSI_LOG_HLQUEUE (2 ,scmd_printk (KERN_INFO , SCpnt, -"Retry with 0x%p\n" , SCpnt)); +"Retry with 0x%px\n" , SCpnt)); goto out; }--
Mit freundlichen Gruessen / Kind regards
Steffen MaierLinux on IBM Z and LinuxONE
https://www.ibm.com/privacy/us/en/
IBM Deutschland Research & Development GmbH Vorsitzender des Aufsichtsrats: Gregor Pillen
Geschaeftsfuehrung: David Faller, Dirk Wittkopp Sitz der Gesellschaft: Boeblingen
Registergericht: Amtsgericht Stuttgart, HRB 243294
Quoted 8 lines · John Pittman
Thanks for looking Steffen. I failed to notice the
no_hash_pointersoption. I do think it would be a reasonable convenience for debug scsi logging to print the actual address without having to go through the trouble of rebooting enabling theno_hash_pointersparameter then rebooting again to disable afterward. Perhaps the system is a production box that can't be rebooted. Maybe an additional sysctl to enableno_hash_pointerswould be reasonable? That way it could be changed online? Thanks again.
Are SCSI command pointers really useful to anyone? How about modifying the debug statements such that the SCSI command tags are reported instead of the SCSI command pointers? There is a 1:1 correspondence between the values returned by blk_mq_unique_tag() and the SCSI command pointers.
Bart.