configs/qemu_aarch64_virt_defconfig: don't hard code getty port
PATCH 3/3 configs/qemu_aarch64_virt_defconfig: bump Linux kernel to 5.15.16
In reply to Peter Korsgaard--- configs/qemu_aarch64_virt_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
configs/qemu_aarch64_virt_defconfig +1 -1
@@ -20,7 +20,7 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.16" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/aarch64-virt/linux.config" BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
Signature · 6 lines
2.20.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH 2/3 configs/qemu_aarch64_virt_defconfig: linux.config: enable fb/input support
In reply to Peter KorsgaardThe Linux config already enabled drm-virtio for graphics output, but not the corresponding virtio-input / evdev drivers for input or the compatibility fb option.
Enable them so keyboard/mouse input works and /dev/fb0 is provided.
--- board/qemu/aarch64-virt/linux.config | 3 +++ 1 file changed, 3 insertions(+)
board/qemu/aarch64-virt/linux.config +3 -0
@@ -47,6 +47,7 @@ CONFIG_DUMMY=y CONFIG_MACVLAN=y CONFIG_VIRTIO_NET=y CONFIG_NLMON=y +CONFIG_INPUT_EVDEV=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_VIRTIO_CONSOLE=y
@@ -56,9 +57,11 @@ CONFIG_TCG_TPM=y CONFIG_TCG_TIS=y CONFIG_DRM=y CONFIG_DRM_VIRTIO_GPU=y +CONFIG_FB=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_PL031=y CONFIG_VIRTIO_PCI=y +CONFIG_VIRTIO_INPUT=y CONFIG_VIRTIO_MMIO=y CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y CONFIG_MAILBOX=y
Signature · 6 lines
2.20.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH 1/3 configs/qemu_aarch64_virt_defconfig: don't hard code getty port
The Linux defconfig both has VT and serial port support, so it makes more sense to run getty on /dev/console instead of hard coding the serial port.
--- configs/qemu_aarch64_virt_defconfig | 1 - 1 file changed, 1 deletion(-)
configs/qemu_aarch64_virt_defconfig +0 -1
@@ -4,7 +4,6 @@ BR2_cortex_a53=y # System BR2_SYSTEM_DHCP="eth0" -BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0" # Filesystem BR2_TARGET_ROOTFS_EXT2=y
Signature · 6 lines
2.20.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Peter, All,
On 2022-01-22 16:37 +0100, Peter Korsgaard spake thusly:
Quoted 4 lines
The Linux defconfig both has VT and serial port support, so it makes more sense to run getty on
/dev/consoleinstead of hard coding the serial port.Signed-off-by Peter Korsgaard <[email protected]>
Series of 3 patches applied to master, thanks.
Regards,
Yann E. MORIN.
Quoted 23 lines
--- configs/qemu_aarch64_virt_defconfig | 1 - 1 file changed, 1 deletion(-)configs/qemu_aarch64_virt_defconfig +0
-1@@ -4,7 +4,6 @@ BR2_cortex_a53=y # System BR2_SYSTEM_DHCP="eth0" -BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0" # Filesystem BR2_TARGET_ROOTFS_EXT2=ySignature · 6 lines
2.20.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Signature · 10 lines
.-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 561 099 427 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH 3/3] configs/qemu_aarch64_virt_defconfig: bump Linux kernel to 5.15.16
In reply to Peter KorsgaardHello Peter, All
Le 22/01/2022 à 16:37, Peter Korsgaard a écrit :
Quoted 10 lines
Signed-off-by Peter Korsgaard <[email protected]>--- configs/qemu_aarch64_virt_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)configs/qemu_aarch64_virt_defconfig +0
-0
configs/qemu_aarch64_virt_defconfig BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y · line 23
Quoted 5 lines
configs/qemu_aarch64_virt_defconfig +1
-1@@ -20,7 +20,7 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.16"
Why just only taking care of this defconfig ?
Most qemu defconfig are using the same kernel version (5.15). Usually we try to keep all of them in sync.
Since Qemu defconfigs are runtime tested each week in GitLab-CI maybe we can safely switch to BR2_LINUX_KERNEL_LATEST_VERSION instead ?
But we have to check qemu defconfigs using a local kernel patch, currently ppc-mpc8544ds and arm-versatile or keeping kernel custom version for them.
Also BR2_LINUX_KERNEL_LATEST_VERSION refer to the latest stable kernel version, not the latest lts version.
Thoughts?
Best regards,
Romain
configs/qemu_aarch64_virt_defconfig BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y · line 26
Quoted 4 lines
configs/qemu_aarch64_virt_defconfig +0
-0BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/aarch64-virt/linux.config" BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH 3/3] configs/qemu_aarch64_virt_defconfig: bump Linux kernel to 5.15.16
Quoted 4 lines · Romain Naour
configs/qemu_aarch64_virt_defconfig BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y · line 23
Quoted 2 lines
configs/qemu_aarch64_virt_defconfig +1
-1-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.16"Why just only taking care of this defconfig ?
Simply because I did some other changes to it (see the other patches in the series).
Quoted 2 lines
Most qemu defconfig are using the same kernel version (5.15). Usually we try to keep all of them in sync.
Ok.
Quoted 7 lines
Since Qemu defconfigs are runtime tested each week in GitLab-CI maybe we can safely switch to
BR2_LINUX_KERNEL_LATEST_VERSIONinstead ?
But we have to check qemu defconfigs using a local kernel patch, currently ppc-mpc8544ds and arm-versatile or keeping kernel custom version for them.Also
BR2_LINUX_KERNEL_LATEST_VERSIONrefer to the latest stable kernel version, not the latest lts version.
That would mean that they are not really reproducible, so I don't really like it.
--
Bye, Peter Korsgaard
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH 3/3] configs/qemu_aarch64_virt_defconfig: bump Linux kernel to 5.15.16
Hello Peter,
Le 23/01/2022 à 15:48, Peter Korsgaard a écrit :
Quoted 7 lines · Romain Naour
Quoted 5 lines
configs/qemu_aarch64_virt_defconfig BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y · line 23
Quoted 3 lines
configs/qemu_aarch64_virt_defconfig +1
-1-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.15.16"Why just only taking care of this defconfig ?
Quoted 7 lines
Simply because I did some other changes to it (see the other patches in the series).
Quoted 2 lines
Most qemu defconfig are using the same kernel version (5.15). Usually we try to keep all of them in sync.
Ok.
To test all qemu defconfig in gitlab you can push a branch named "kernel-5.15.16-defconfigs-qemu"
Where: "kernel-5.15.16" is a prefix, "-defconfigs-" trigger a pipeline for testing Buildroot defconfis and "qemu" is a pattern to match all defconfig named qemu*.
See:
https://gitlab.com/buildroot.org/buildroot/-/commit/65d2f04c012af492a9b9da04dfa3b3cbd20347f1
The kernel 5.15 is not as old, do we want to follow closely the latest kernel version for Qemu defconfigs? But it's annoying to modify each time the kernel version in several place.
Quoted 10 lines
Quoted 8 lines
Since Qemu defconfigs are runtime tested each week in GitLab-CI maybe we can safely switch to
BR2_LINUX_KERNEL_LATEST_VERSIONinstead ?
But we have to check qemu defconfigs using a local kernel patch, currently ppc-mpc8544ds and arm-versatile or keeping kernel custom version for them.Also
BR2_LINUX_KERNEL_LATEST_VERSIONrefer to the latest stable kernel version, not the latest lts version.That would mean that they are not really reproducible, so I don't really like it.
For a given Buildroot version BR2_LINUX_KERNEL_LATEST_VERSION is set with a default kernel version.
Actually defconfigs are already not reproducible since the internal toolchain components version use the default version.
But indeed, the kernel version change faster than the toolchain.
Best regards,
Romain
Quoted 3 lines
Signature · 2 lines
-- Bye, Peter Korsgaard
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot