Add support for the SHIFT SHIFT6mq
Subsystems (4)
cover Add support for the SHIFT SHIFT6mq
This series adds initial support for the SHIFT6mq. SHIFT are a sustainably oriented device manufacturer who aim to build repairable devices with long lifespans.
The SHIFT6mq is a Snapdragon 845 based device, it features a 1080p OLED panel, 8GB of RAM, 128GB of UFS storage and display port alt mode. The device also ships with secure-boot off, potentially allowing end-users to modify usually inaccesible parts of the device like the bootloader. They've been keen to see their devices supported upstream kernels!
This brings up initial support for the device, with all core features working:
* Display / GPU / touch
* WIFI
* Modem (sms and mobile data are supported with ModemManager)
- Caleb
Alexander Martinz (1):
arm64: dts: qcom: sdm845: add device tree for SHIFT6mq
Caleb Connolly (5):
dt-bindings: input: touchscreen: add bindings for focaltech,fts
input: touchscreen: add focaltech FTS driver
dt-bindings: display: visionox-rm69299: document new compatible string drm/panel: visionox-rm69299: support the variant found in the SHIFT6mq
dt-bindings: vendor-prefixes: add vendor prefix for SHIFT
.../display/panel/visionox,rm69299.yaml | 4 +- .../input/touchscreen/focaltech,fts.yaml | 78 ++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/sdm845-shift-axolotl.dts | 736 +++++++++++++++ .../gpu/drm/panel/panel-visionox-rm69299.c | 281 ++++-- drivers/input/touchscreen/Kconfig | 9 + drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/focaltech_fts.c | 870 ++++++++++++++++++ 9 files changed, 1921 insertions(+), 61 deletions(-) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/focaltech,fts.yaml create mode 100644 arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts create mode 100644 drivers/input/touchscreen/focaltech_fts.c
--
2.34.1
PATCH 1/6 dt-bindings: input: touchscreen: add bindings for focaltech,fts
Add devicetree bindings for the Focaltech FTS touchscreen drivers.
--- .../input/touchscreen/focaltech,fts.yaml | 78 +++++++++++++++++++ 1 file changed, 78 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/focaltech,fts.yaml
Documentation/devicetree/bindings/input/touchscreen/focaltech,fts.yaml new file +78 -0
@@ -0,0 +1,78 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/focaltech,fts.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Focaltech FTS I2C Touchscreen Controller + +maintainers: + - Caleb Connolly <[email protected]> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + enum: + - focaltech,fts5452 + - focaltech,fts8719 + reg: + const: 0x38 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + wakeup-source: + type: boolean + description: touchscreen can be used as a wakeup source. + + focaltech,max-touch-number: + $ref: /schemas/types.yaml#/definitions/uint32 + description: max number of fingers supported + minimum: 2 + maximum: 10 + + touchscreen-size-x: true + touchscreen-size-y: true + +additionalProperties: false + +required: + - compatible + - reg + - reset-gpios + - focaltech,max-touch-number + - touchscreen-size-x + - touchscreen-size-y + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + &i2c5 { + status="okay"; + + touchscreen: focaltech@38 { + compatible = "focaltech,fts8719"; + reg = <0x38>; + wakeup-source; + interrupt-parent = <&tlmm>; + interrupts = <125 0x2>; + vdd-supply = <&vreg_l28a_3p0>; + vcc-i2c-supply = <&vreg_l14a_1p88>; + + pinctrl-names = "default", "suspend"; + pinctrl-0 = <&ts_int_active &ts_reset_active>; + pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>; + + reset-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>; + irq-gpio = <&tlmm 125 GPIO_TRANSITORY>; + touchscreen-size-x = <1080>; + touchscreen-size-y = <2160>; + focaltech,max-touch-number = <5>; + }; + };
--
2.34.1
PATCH 2/6 input: touchscreen: add focaltech FTS driver
In reply to Caleb ConnollyThe focaltech FTS driver supports several variants of focaltech touch screens found in ~2018 era smartphones including a variant of the PocoPhone F1 and the SHIFT6mq. This driver is loosely based on the original driver from Focaltech but has been simplified and largely reworked.
--- drivers/input/touchscreen/Kconfig | 9 + drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/focaltech_fts.c | 870 ++++++++++++++++++++++ 3 files changed, 880 insertions(+) create mode 100644 drivers/input/touchscreen/focaltech_fts.c
drivers/input/touchscreen/Kconfig +9 -0
@@ -372,6 +372,15 @@ config TOUCHSCREEN_EXC3000 To compile this driver as a module, choose M here: the module will be called exc3000. +config TOUCHSCREEN_FOCALTECH_FTS + tristate "Focaltech FTS Touchscreen" + depends on I2C + help + Say Y here to enable support for Focaltech FTS based + touch panels, including the 5452 and 8917 panels. + + If unsure, say N. + config TOUCHSCREEN_FUJITSU tristate "Fujitsu serial touchscreen" select SERIO
drivers/input/touchscreen/Makefile +1 -0
@@ -44,6 +44,7 @@ obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o obj-$(CONFIG_TOUCHSCREEN_EGALAX) += egalax_ts.o obj-$(CONFIG_TOUCHSCREEN_EGALAX_SERIAL) += egalax_ts_serial.o obj-$(CONFIG_TOUCHSCREEN_EXC3000) += exc3000.o +obj-$(CONFIG_TOUCHSCREEN_FOCALTECH_FTS) += focaltech_fts.o obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix_ts.o obj-$(CONFIG_TOUCHSCREEN_HIDEEP) += hideep.o
drivers/input/touchscreen/focaltech_fts.c new file +870 -0
870 lines not on this page · raw message
--
2.34.1
Rob Herring
maintainerRe: [PATCH 1/6] dt-bindings: input: touchscreen: add bindings for focaltech,fts
In reply to Caleb ConnollyQuoted 8 lines · Caleb Connolly
Add devicetree bindings for the Focaltech FTS touchscreen drivers.
Signed-off-by Caleb Connolly <[email protected]>--- .../input/touchscreen/focaltech,fts.yaml | 78 +++++++++++++++++++ 1 file changed, 78 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/focaltech,fts.yaml
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
Error: Documentation/devicetree/bindings/input/touchscreen/focaltech,fts.example.dts:21.9-14 syntax error FATAL ERROR: Unable to parse input tree
make[1]: *** [scripts/Makefile.lib:378: Documentation/devicetree/bindings/input/touchscreen/focaltech,fts.example.dt.yaml] Error 1 make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1398: dt_binding_check] Error 2
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/patch/1583161
This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date:
pip3 install dtschema --upgrade
Please check and re-submit.