Skip to contentSkip to conversation

Fix compiler warnings for 32-bit ARM

PATCH In review Simon Glass 3 participants 11 messages Jan 23, 2022 – Feb 4, 2022

Subsystems (6)
lore
Share & tools
lore
#0 lore raw

v5 cover Fix compiler warnings for 32-bit ARM

These were noticed when building sandbox on a Raspberry Pi 400, which uses 32-bit linux.

To make this work, I enabled CONFIG_HOST_32BIT in 'make menuconfig'. It would be nice if that were automatic, since we have the logic already in arch/sandbox/config.mk

So this series adds that.

It also fixes the unicode warnings of the form:

/usr/bin/ld: warning: arch/sandbox/cpu/start.o uses 2-byte wchar_t yet the output is to use 4-byte wchar_t; use of wchar_t values across objects may fail

as suggested by Heinrich.

Changes in v5:
- Resync with upstream instead

Changes in v4:
- Rebase to master
- Use $(HOSTCC) instead of gcc
- Add proper Kconfig help

Changes in v3:
- Change some things EFI things missed (or new since) last time
- Use 'bitness' instead of 'bit'
- Add a new patch to change non-EFI occurences

Changes in v2:
- Drop patches previously applied
- Put all the packages in gcc.rst

Simon Glass (4):
scripts/checkpatch.pl: Resync with v5.16
efi: Use 16-bit unicode strings
sandbox: Detect the host bit size automatically
treewide: Use 16-bit unicode strings

 Makefile                                      |  11 +-
 arch/sandbox/Kconfig                          |  33 +-
 cmd/efidebug.c                                |  28 +-
 doc/develop/checkpatch.rst                    | 590 ++++++++++++++++--
 include/efi_loader.h                          |   2 +-
 include/efi_selftest.h                        |   4 +-
 lib/efi_loader/efi_bootmgr.c                  |  12 +-
 lib/efi_loader/efi_boottime.c                 |   2 +-
 lib/efi_loader/efi_capsule.c                  |  22 +-
 lib/efi_loader/efi_helper.c                   |   2 +-
 lib/efi_loader/efi_image_loader.c             |   8 +-
 lib/efi_loader/efi_setup.c                    |  14 +-
 lib/efi_loader/efi_string.c                   |   2 +-
 lib/efi_loader/efi_tcg2.c                     |   4 +-
 lib/efi_loader/efi_var_common.c               |  12 +-
 lib/efi_loader/efi_variable.c                 |   6 +-
 lib/efi_loader/efi_variable_tee.c             |   2 +-
 lib/efi_loader/helloworld.c                   |  40 +-
 lib/efi_selftest/dtbdump.c                    |  82 +--
 lib/efi_selftest/efi_selftest.c               |   2 +-
 lib/efi_selftest/efi_selftest_block_device.c  |   6 +-
 lib/efi_selftest/efi_selftest_devicepath.c    |   2 +-
 lib/efi_selftest/efi_selftest_exception.c     |   2 +-
 lib/efi_selftest/efi_selftest_fdt.c           |   6 +-
 lib/efi_selftest/efi_selftest_hii.c           |   8 +-
 lib/efi_selftest/efi_selftest_load_file.c     |   4 +-
 lib/efi_selftest/efi_selftest_loadimage.c     |   4 +-
 .../efi_selftest_miniapp_exception.c          |   4 +-
 lib/efi_selftest/efi_selftest_miniapp_exit.c  |   8 +-
 .../efi_selftest_miniapp_return.c             |   2 +-
 lib/efi_selftest/efi_selftest_reset.c         |   2 +-
 lib/efi_selftest/efi_selftest_textoutput.c    |  12 +-
 .../efi_selftest_unicode_collation.c          |  38 +-
 lib/efi_selftest/efi_selftest_util.c          | 106 ++--
 lib/efi_selftest/efi_selftest_variables.c     |  22 +-
 .../efi_selftest_variables_runtime.c          |   4 +-
 lib/efi_selftest/initrddump.c                 |  60 +-
 lib/lzma/Types.h                              |   4 +-
 lib/vsprintf.c                                |   2 +-
 scripts/checkpatch.pl                         | 145 +++--
 scripts/kconfig/Makefile                      |  14 +-
 scripts/spdxcheck.py                          |   2 +-
 test/print_ut.c                               |   2 +-
 test/unicode_ut.c                             |  22 +-
 44 files changed, 974 insertions(+), 385 deletions(-)
Signature · 1 line
2.35.0.rc0.227.g00780c9af4-goog
#1 lore raw

PATCH v5 1/4 scripts/checkpatch.pl: Resync with v5.16

This resyncs us with the version found in v5.16 of the Linux kernel with the following exceptions:
- Keep our u-boot specific tests / code area.
- Change the location of checkpatch.rst
- Drop the "use strscpy" test as we don't have that, but do have strlcpy and want that used now.
- Keep debug/printf in the list for $logFunctions

This also syncs the spdxcheck.py tool and all the associated documentation.
S

---

Changes in v5:
- Resync with upstream instead

 doc/develop/checkpatch.rst | 590 ++++++++++++++++++++++++++++++++++---
 scripts/checkpatch.pl      | 145 ++++++---
 scripts/spdxcheck.py       |   2 +-
 3 files changed, 641 insertions(+), 96 deletions(-)
doc/develop/checkpatch.rst +542 -48
index 51fed1bd72e..b52452bc296 100644
@@ -246,6 +246,7 @@ Allocation style
     The first argument for kcalloc or kmalloc_array should be the
     number of elements.  sizeof() as the first argument is generally
     wrong.
+
     See: https://www.kernel.org/doc/html/latest/core-api/memory-allocation.html
 
   **ALLOC_SIZEOF_STRUCT**
@@ -264,6 +265,7 @@ Allocation style
   **ALLOC_WITH_MULTIPLY**
     Prefer kmalloc_array/kcalloc over kmalloc/kzalloc with a
     sizeof multiply.
+
     See: https://www.kernel.org/doc/html/latest/core-api/memory-allocation.html
 
 
@@ -284,6 +286,7 @@ API usage
     BUG() or BUG_ON() should be avoided totally.
     Use WARN() and WARN_ON() instead, and handle the "impossible"
     error condition as gracefully as possible.
+
     See: https://www.kernel.org/doc/html/latest/process/deprecated.html#bug-and-bug-on
 
   **CONSIDER_KSTRTO**
@@ -292,12 +295,161 @@ API usage
     may lead to unexpected results in callers.  The respective kstrtol(),
     kstrtoll(), kstrtoul(), and kstrtoull() functions tend to be the
     correct replacements.
+
     See: https://www.kernel.org/doc/html/latest/process/deprecated.html#simple-strtol-simple-strtoll-simple-strtoul-simple-strtoull
 
+  **CONSTANT_CONVERSION**
+    Use of __constant_<foo> form is discouraged for the following functions::
+
+      __constant_cpu_to_be[x]
+      __constant_cpu_to_le[x]
+      __constant_be[x]_to_cpu
+      __constant_le[x]_to_cpu
+      __constant_htons
+      __constant_ntohs
+
+    Using any of these outside of include/uapi/ is not preferred as using the
+    function without __constant_ is identical when the argument is a
+    constant.
+
+    In big endian systems, the macros like __constant_cpu_to_be32(x) and
+    cpu_to_be32(x) expand to the same expression::
+
+      #define __constant_cpu_to_be32(x) ((__force __be32)(__u32)(x))
+      #define __cpu_to_be32(x)          ((__force __be32)(__u32)(x))
+
+    In little endian systems, the macros __constant_cpu_to_be32(x) and
+    cpu_to_be32(x) expand to __constant_swab32 and __swab32.  __swab32
+    has a __builtin_constant_p check::
+
+      #define __swab32(x)				\
+        (__builtin_constant_p((__u32)(x)) ?	\
+        ___constant_swab32(x) :			\
+        __fswab32(x))
+
+    So ultimately they have a special case for constants.
+    Similar is the case with all of the macros in the list.  Thus
+    using the __constant_... forms are unnecessarily verbose and
+    not preferred outside of include/uapi.
+
+    See: https://lore.kernel.org/lkml/1400106425.12666.6.camel@joe-AO725/
+
+  **DEPRECATED_API**
+    Usage of a deprecated RCU API is detected.  It is recommended to replace
+    old flavourful RCU APIs by their new vanilla-RCU counterparts.
+
+    The full list of available RCU APIs can be viewed from the kernel docs.
+
+    See: https://www.kernel.org/doc/html/latest/RCU/whatisRCU.html#full-list-of-rcu-apis
+
+  **DEPRECATED_VARIABLE**
+    EXTRA_{A,C,CPP,LD}FLAGS are deprecated and should be replaced by the new
+    flags added via commit f77bf01425b1 ("kbuild: introduce ccflags-y,
+    asflags-y and ldflags-y").
+
+    The following conversion scheme maybe used::
+
+      EXTRA_AFLAGS    ->  asflags-y
+      EXTRA_CFLAGS    ->  ccflags-y
+      EXTRA_CPPFLAGS  ->  cppflags-y
+      EXTRA_LDFLAGS   ->  ldflags-y
+
+    See:
+
+      1. https://lore.kernel.org/lkml/[email protected]/
+      2. https://lore.kernel.org/lkml/[email protected]/
+      3. https://www.kernel.org/doc/html/latest/kbuild/makefiles.html#compilation-flags
+
+  **DEVICE_ATTR_FUNCTIONS**
+    The function names used in DEVICE_ATTR is unusual.
+    Typically, the store and show functions are used with <attr>_store and
+    <attr>_show, where <attr> is a named attribute variable of the device.
+
+    Consider the following examples::
+
+      static DEVICE_ATTR(type, 0444, type_show, NULL);
+      static DEVICE_ATTR(power, 0644, power_show, power_store);
+
+    The function names should preferably follow the above pattern.
+
+    See: https://www.kernel.org/doc/html/latest/driver-api/driver-model/device.html#attributes
+
+  **DEVICE_ATTR_RO**
+    The DEVICE_ATTR_RO(name) helper macro can be used instead of
+    DEVICE_ATTR(name, 0444, name_show, NULL);
+
+    Note that the macro automatically appends _show to the named
+    attribute variable of the device for the show method.
+
+    See: https://www.kernel.org/doc/html/latest/driver-api/driver-model/device.html#attributes
+
+  **DEVICE_ATTR_RW**
+    The DEVICE_ATTR_RW(name) helper macro can be used instead of
+    DEVICE_ATTR(name, 0644, name_show, name_store);
+
+    Note that the macro automatically appends _show and _store to the
+    named attribute variable of the device for the show and store methods.
+
+    See: https://www.kernel.org/doc/html/latest/driver-api/driver-model/device.html#attributes
+
+  **DEVICE_ATTR_WO**
+    The DEVICE_AATR_WO(name) helper macro can be used instead of
+    DEVICE_ATTR(name, 0200, NULL, name_store);
+
+    Note that the macro automatically appends _store to the
+    named attribute variable of the device for the store method.
+
+    See: https://www.kernel.org/doc/html/latest/driver-api/driver-model/device.html#attributes
+
+  **DUPLICATED_SYSCTL_CONST**
+    Commit d91bff3011cf ("proc/sysctl: add shared variables for range
+    check") added some shared const variables to be used instead of a local
+    copy in each source file.
+
+    Consider replacing the sysctl range checking value with the shared
+    one in include/linux/sysctl.h.  The following conversion scheme may
+    be used::
+
+      &zero     ->  SYSCTL_ZERO
+      &one      ->  SYSCTL_ONE
+      &int_max  ->  SYSCTL_INT_MAX
+
+    See:
+
+      1. https://lore.kernel.org/lkml/[email protected]/
+      2. https://lore.kernel.org/lkml/[email protected]/
+
+  **ENOSYS**
+    ENOSYS means that a nonexistent system call was called.
+    Earlier, it was wrongly used for things like invalid operations on
+    otherwise valid syscalls.  This should be avoided in new code.
+
+    See: https://lore.kernel.org/lkml/5eb299021dec23c1a48fa7d9f2c8b794e967766d.1408730669.git.luto@amacapital.net/
+
+  **ENOTSUPP**
+    ENOTSUPP is not a standard error code and should be avoided in new patches.
+    EOPNOTSUPP should be used instead.
+
+    See: https://lore.kernel.org/netdev/[email protected]/
+
+  **EXPORT_SYMBOL**
+    EXPORT_SYMBOL should immediately follow the symbol to be exported.
+
+  **IN_ATOMIC**
+    in_atomic() is not for driver use so any such use is reported as an ERROR.
+    Also in_atomic() is often used to determine if sleeping is permitted,
+    but it is not reliable in this use model.  Therefore its use is
+    strongly discouraged.
+
+    However, in_atomic() is ok for core kernel use.
+
+    See: https://lore.kernel.org/lkml/[email protected]/
+
   **LOCKDEP**
     The lockdep_no_validate class was added as a temporary measure to
     prevent warnings on conversion of device->sem to device->mutex.
     It should not be used for any other purpose.
+
     See: https://lore.kernel.org/lkml/1268959062.9440.467.camel@laptop/
 
   **MALFORMED_INCLUDE**
@@ -308,14 +460,21 @@ API usage
   **USE_LOCKDEP**
     lockdep_assert_held() annotations should be preferred over
     assertions based on spin_is_locked()
+
     See: https://www.kernel.org/doc/html/latest/locking/lockdep-design.html#annotations
 
   **UAPI_INCLUDE**
     No #include statements in include/uapi should use a uapi/ path.
 
+  **USLEEP_RANGE**
+    usleep_range() should be preferred over udelay(). The proper way of
+    using usleep_range() is mentioned in the kernel docs.
+
+    See: https://www.kernel.org/doc/html/latest/timers/timers-howto.html#delays-information-on-the-various-kernel-delay-sleep-mechanisms
 
-Comment style
--------------
+
+Comments
+--------
 
   **BLOCK_COMMENT_STYLE**
     The comment style is incorrect.  The preferred style for multi-
@@ -338,8 +497,24 @@ Comment style
   **C99_COMMENTS**
     C99 style single line comments (//) should not be used.
     Prefer the block comment style instead.
+
     See: https://www.kernel.org/doc/html/latest/process/coding-style.html#commenting
 
+  **DATA_RACE**
+    Applications of data_race() should have a comment so as to document the
+    reasoning behind why it was deemed safe.
+
+    See: https://lore.kernel.org/lkml/[email protected]/
+
+  **FSF_MAILING_ADDRESS**
+    Kernel maintainers reject new instances of the GPL boilerplate paragraph
+    directing people to write to the FSF for a copy of the GPL, since the
+    FSF has moved in the past and may do so again.
+    So do not write paragraphs about writing to the Free Software Foundation's
+    mailing address.
+
+    See: https://lore.kernel.org/lkml/20131006222342.GT19510@leaf/
+
 
 Commit message
 --------------
@@ -347,6 +522,7 @@ Commit message
   **BAD_SIGN_OFF**
     The signed-off-by line does not fall in line with the standards
     specified by the community.
+
     See: https://www.kernel.org/doc/html/latest/process/submitting-patches.html#developer-s-certificate-of-origin-1-1
 
   **BAD_STABLE_ADDRESS_STYLE**
@@ -368,12 +544,33 @@ Commit message
   **COMMIT_MESSAGE**
     The patch is missing a commit description.  A brief
     description of the changes made by the patch should be added.
+
+    See: https://www.kernel.org/doc/html/latest/process/submitting-patches.html#describe-your-changes
+
+  **EMAIL_SUBJECT**
+    Naming the tool that found the issue is not very useful in the
+    subject line.  A good subject line summarizes the change that
+    the patch brings.
+
     See: https://www.kernel.org/doc/html/latest/process/submitting-patches.html#describe-your-changes
 
+  **FROM_SIGN_OFF_MISMATCH**
+    The author's email does not match with that in the Signed-off-by:
+    line(s). This can be sometimes caused due to an improperly configured
+    email client.
+
+    This message is emitted due to any of the following reasons::
+
+      - The email names do not match.
+      - The email addresses do not match.
+      - The email subaddresses do not match.
+      - The email comments do not match.
+
   **MISSING_SIGN_OFF**
     The patch is missing a Signed-off-by line.  A signed-off-by
     line should be added according to Developer's certificate of
     Origin.
+
     See: https://www.kernel.org/doc/html/latest/process/submitting-patches.html#sign-your-work-the-developer-s-certificate-of-origin
 
   **NO_AUTHOR_SIGN_OFF**
@@ -382,6 +579,7 @@ Commit message
     end of explanation of the patch to denote that the author has
     written it or otherwise has the rights to pass it on as an open
     source patch.
+
     See: https://www.kernel.org/doc/html/latest/process/submitting-patches.html#sign-your-work-the-developer-s-certificate-of-origin
 
   **DIFF_IN_COMMIT_MSG**
@@ -389,6 +587,7 @@ Commit message
     This causes problems when one tries to apply a file containing both
     the changelog and the diff because patch(1) tries to apply the diff
     which it found in the changelog.
+
     See: https://lore.kernel.org/lkml/[email protected]/
 
   **GERRIT_CHANGE_ID**
@@ -431,6 +630,7 @@ Comparison style
   **BOOL_COMPARISON**
     Comparisons of A to true and false are better written
     as A and !A.
+
     See: https://lore.kernel.org/lkml/1365563834.27174.12.camel@joe-AO722/
 
   **COMPARISON_TO_NULL**
@@ -442,6 +642,120 @@ Comparison style
     side of the test should be avoided.
 
 
+Indentation and Line Breaks
+---------------------------
+
+  **CODE_INDENT**
+    Code indent should use tabs instead of spaces.
+    Outside of comments, documentation and Kconfig,
+    spaces are never used for indentation.
+
+    See: https://www.kernel.org/doc/html/latest/process/coding-style.html#indentation
+
+  **DEEP_INDENTATION**
+    Indentation with 6 or more tabs usually indicate overly indented
+    code.
+
+    It is suggested to refactor excessive indentation of
+    if/else/for/do/while/switch statements.
+
+    See: https://lore.kernel.org/lkml/1328311239.21255.24.camel@joe2Laptop/
+
+  **SWITCH_CASE_INDENT_LEVEL**
+    switch should be at the same indent as case.
+    Example::
+
+      switch (suffix) {
+      case 'G':
+      case 'g':
+              mem <<= 30;
+              break;
+      case 'M':
+      case 'm':
+              mem <<= 20;
+              break;
+      case 'K':
+      case 'k':
+              mem <<= 10;
+              fallthrough;
+      default:
+              break;
+      }
+
+    See: https://www.kernel.org/doc/html/latest/process/coding-style.html#indentation
+
+  **LONG_LINE**
+    The line has exceeded the specified maximum length.
+    To use a different maximum line length, the --max-line-length=n option
+    may be added while invoking checkpatch.
+
+    Earlier, the default line length was 80 columns.  Commit bdc48fa11e46
+    ("checkpatch/coding-style: deprecate 80-column warning") increased the
+    limit to 100 columns.  This is not a hard limit either and it's
+    preferable to stay within 80 columns whenever possible.
+
+    See: https://www.kernel.org/doc/html/latest/process/coding-style.html#breaking-long-lines-and-strings
+
+  **LONG_LINE_STRING**
+    A string starts before but extends beyond the maximum line length.
+    To use a different maximum line length, the --max-line-length=n option
+    may be added while invoking checkpatch.
+
+    See: https://www.kernel.org/doc/html/latest/process/coding-style.html#breaking-long-lines-and-strings
+
+  **LONG_LINE_COMMENT**
+    A comment starts before but extends beyond the maximum line length.
+    To use a different maximum line length, the --max-line-length=n option
+    may be added while invoking checkpatch.
+
+    See: https://www.kernel.org/doc/html/latest/process/coding-style.html#breaking-long-lines-and-strings
+
+  **SPLIT_STRING**
+    Quoted strings that appear as messages in userspace and can be
+    grepped, should not be split across multiple lines.
+
+    See: https://lore.kernel.org/lkml/20120203052727.GA15035@leaf/
+
+  **MULTILINE_DEREFERENCE**
+    A single dereferencing identifier spanned on multiple lines like::
+
+      struct_identifier->member[index].
+      member = <foo>;
+
+    is generally hard to follow. It can easily lead to typos and so makes
+    the code vulnerable to bugs.
+
+    If fixing the multiple line dereferencing leads to an 80 column
+    violation, then either rewrite the code in a more simple way or if the
+    starting part of the dereferencing identifier is the same and used at
+    multiple places then store it in a temporary variable, and use that
+    temporary variable only at all the places. For example, if there are
+    two dereferencing identifiers::
+
+      member1->member2->member3.foo1;
+      member1->member2->member3.foo2;
+
+    then store the member1->member2->member3 part in a temporary variable.
+    It not only helps to avoid the 80 column violation but also reduces
+    the program size by removing the unnecessary dereferences.
+
+    But if none of the above methods work then ignore the 80 column
+    violation because it is much easier to read a dereferencing identifier
+    on a single line.
+
+  **TRAILING_STATEMENTS**
+    Trailing statements (for example after any conditional) should be
+    on the next line.
+    Statements, such as::
+
+      if (x == y) break;
+
+    should be::
+
+      if (x == y)
+              break;
+
+
 Macros, Attributes and Symbols
 ------------------------------
 
@@ -472,7 +786,7 @@ Macros, Attributes and Symbols
 
   **BIT_MACRO**
     Defines like: 1 << <digit> could be BIT(digit).
-    The BIT() macro is defined in include/linux/bitops.h::
+    The BIT() macro is defined via include/linux/bits.h::
 
       #define BIT(nr)         (1UL << (nr))
 
@@ -492,6 +806,7 @@ Macros, Attributes and Symbols
     The kernel does *not* use the ``__DATE__`` and ``__TIME__`` macros,
     and enables warnings if they are used as they can lead to
     non-deterministic builds.
+
     See: https://www.kernel.org/doc/html/latest/kbuild/reproducible-builds.html#timestamps
 
   **DEFINE_ARCH_HAS**
@@ -502,8 +817,12 @@ Macros, Attributes and Symbols
     want architectures able to override them with optimized ones, we
     should either use weak functions (appropriate for some cases), or
     the symbol that protects them should be the same symbol we use.
+
     See: https://lore.kernel.org/lkml/CA+55aFycQ9XJvEOsiM3txHL5bjUc8CeKWJNR_H+MiicaddB42Q@mail.gmail.com/
 
+  **DO_WHILE_MACRO_WITH_TRAILING_SEMICOLON**
+    do {} while(0) macros should not have a trailing semicolon.
+
   **INIT_ATTRIBUTE**
     Const init definitions should use __initconst instead of
     __initdata.
@@ -528,6 +847,20 @@ Macros, Attributes and Symbols
               ...
       }
 
+  **MISPLACED_INIT**
+    It is possible to use section markers on variables in a way
+    which gcc doesn't understand (or at least not the way the
+    developer intended)::
+
+      static struct __initdata samsung_pll_clock exynos4_plls[nr_plls] = {
+
+    does not put exynos4_plls in the .initdata section. The __initdata
+    marker can be virtually anywhere on the line, except right after
+    "struct". The preferred location is before the "=" sign if there is
+    one, or before the trailing ";" otherwise.
+
+    See: https://lore.kernel.org/lkml/1377655732.3619.19.camel@joe-AO722/
+
   **MULTISTATEMENT_MACRO_USE_DO_WHILE**
     Macros with multiple statements should be enclosed in a
     do - while block.  Same should also be the case for macros
@@ -541,6 +874,42 @@ Macros, Attributes and Symbols
 
     See: https://www.kernel.org/doc/html/latest/process/coding-style.html#macros-enums-and-rtl
 
+  **PREFER_FALLTHROUGH**
+    Use the `fallthrough;` pseudo keyword instead of
+    `/* fallthrough */` like comments.
+
+  **TRAILING_SEMICOLON**
+    Macro definition should not end with a semicolon. The macro
+    invocation style should be consistent with function calls.
+    This can prevent any unexpected code paths::
+
+      #define MAC do_something;
+
+    If this macro is used within a if else statement, like::
+
+      if (some_condition)
+              MAC;
+
+      else
+              do_something;
+
+    Then there would be a compilation error, because when the macro is
+    expanded there are two trailing semicolons, so the else branch gets
+    orphaned.
+
+    See: https://lore.kernel.org/lkml/1399671106.2912.21.camel@joe-AO725/
+
+  **SINGLE_STATEMENT_DO_WHILE_MACRO**
+    For the multi-statement macros, it is necessary to use the do-while
+    loop to avoid unpredictable code paths. The do-while loop helps to
+    group the multiple statements into a single one so that a
+    function-like macro can be used as a function only.
+
+    But for the single statement macros, it is unnecessary to use the
+    do-while loop. Although the code is syntactically correct but using
+    the do-while loop is redundant. So remove the do-while loop for single
+    statement macros.
+
   **WEAK_DECLARATION**
     Using weak declarations like __attribute__((weak)) or __weak
     can have unintended link defects.  Avoid using them.
@@ -551,8 +920,51 @@ Functions and Variables
 
   **CAMELCASE**
     Avoid CamelCase Identifiers.
+
     See: https://www.kernel.org/doc/html/latest/process/coding-style.html#naming
 
+  **CONST_CONST**
+    Using `const <type> const *` is generally meant to be
+    written `const <type> * const`.
+
+  **CONST_STRUCT**
+    Using const is generally a good idea.  Checkpatch reads
+    a list of frequently used structs that are always or
+    almost always constant.
+
+    The existing structs list can be viewed from
+    `scripts/const_structs.checkpatch`.
+
+    See: https://lore.kernel.org/lkml/alpine.DEB.2.10.1608281509480.3321@hadrien/
+
+  **EMBEDDED_FUNCTION_NAME**
+    Embedded function names are less appropriate to use as
+    refactoring can cause function renaming.  Prefer the use of
+    "%s", __func__ to embedded function names.
+
+    Note that this does not work with -f (--file) checkpatch option
+    as it depends on patch context providing the function name.
+
+  **FUNCTION_ARGUMENTS**
+    This warning is emitted due to any of the following reasons:
+
+      1. Arguments for the function declaration do not follow
+         the identifier name.  Example::
+
+           void foo
+           (int bar, int baz)
+
+         This should be corrected to::
+
+           void foo(int bar, int baz)
+
+      2. Some arguments for the function definition do not
+         have an identifier name.  Example::
+
+           void foo(int)
+
+         All arguments should have identifier names.
+
   **FUNCTION_WITHOUT_ARGS**
     Function declarations without arguments like::
 
@@ -573,6 +985,11 @@ Functions and Variables
     Your compiler (or rather your loader) automatically does
     it for you.
 
+  **MULTIPLE_ASSIGNMENTS**
+    Multiple assignments on a single line makes the code unnecessarily
+    complicated. So on a single line assign value to a single variable
+    only, this makes the code more readable and helps avoid typos.
+
   **RETURN_PARENTHESES**
     return is not a function and as such doesn't need parentheses::
 
@@ -583,6 +1000,45 @@ Functions and Variables
       return bar;
 
 
+Permissions
+-----------
+
+  **DEVICE_ATTR_PERMS**
+    The permissions used in DEVICE_ATTR are unusual.
+    Typically only three permissions are used - 0644 (RW), 0444 (RO)
+    and 0200 (WO).
+
+    See: https://www.kernel.org/doc/html/latest/filesystems/sysfs.html#attributes
+
+  **EXECUTE_PERMISSIONS**
+    There is no reason for source files to be executable.  The executable
+    bit can be removed safely.
+
+  **EXPORTED_WORLD_WRITABLE**
+    Exporting world writable sysfs/debugfs files is usually a bad thing.
+    When done arbitrarily they can introduce serious security bugs.
+    In the past, some of the debugfs vulnerabilities would seemingly allow
+    any local user to write arbitrary values into device registers - a
+    situation from which little good can be expected to emerge.
+
+    See: https://lore.kernel.org/linux-arm-kernel/[email protected]/
+
+  **NON_OCTAL_PERMISSIONS**
+    Permission bits should use 4 digit octal permissions (like 0700 or 0444).
+    Avoid using any other base like decimal.
+
+  **SYMBOLIC_PERMS**
+    Permission bits in the octal form are more readable and easier to
+    understand than their symbolic counterparts because many command-line
+    tools use this notation. Experienced kernel developers have been using
+    these traditional Unix permission bits for decades and so they find it
+    easier to understand the octal notation than the symbolic macros.
+    For example, it is harder to read S_IWUSR|S_IRUGO than 0644, which
+    obscures the developer's intent rather than clarifying it.
+
+    See: https://lore.kernel.org/lkml/CA+55aFw5v23T-zvDZp-MmD_EYxF8WbafwwB59934FV7g21uMGQ@mail.gmail.com/
+
+
 Spacing and Brackets
 --------------------
 
@@ -616,7 +1072,7 @@ Spacing and Brackets
 
     1. With a type on the left::
 
-        ;int [] a;
+        int [] a;
 
     2. At the beginning of a line for slice initialisers::
 
@@ -626,12 +1082,6 @@ Spacing and Brackets
 
         = { [0...10] = 5 }
 
-  **CODE_INDENT**
-    Code indent should use tabs instead of spaces.
-    Outside of comments, documentation and Kconfig,
-    spaces are never used for indentation.
-    See: https://www.kernel.org/doc/html/latest/process/coding-style.html#indentation
-
   **CONCATENATED_STRING**
     Concatenated elements should have a space in between.
     Example::
@@ -644,17 +1094,20 @@ Spacing and Brackets
 
   **ELSE_AFTER_BRACE**
     `else {` should follow the closing block `}` on the same line.
+
     See: https://www.kernel.org/doc/html/latest/process/coding-style.html#placing-braces-and-spaces
 
   **LINE_SPACING**
     Vertical space is wasted given the limited number of lines an
     editor window can display when multiple blank lines are used.
+
     See: https://www.kernel.org/doc/html/latest/process/coding-style.html#spaces
 
   **OPEN_BRACE**
     The opening brace should be following the function definitions on the
     next line.  For any non-functional block it should be on the same line
     as the last construct.
+
     See: https://www.kernel.org/doc/html/latest/process/coding-style.html#placing-braces-and-spaces
 
   **POINTER_LOCATION**
@@ -671,37 +1124,47 @@ Spacing and Brackets
 
   **SPACING**
     Whitespace style used in the kernel sources is described in kernel docs.
-    See: https://www.kernel.org/doc/html/latest/process/coding-style.html#spaces
-
-  **SWITCH_CASE_INDENT_LEVEL**
-    switch should be at the same indent as case.
-    Example::
 
-      switch (suffix) {
-      case 'G':
-      case 'g':
-              mem <<= 30;
-              break;
-      case 'M':
-      case 'm':
-              mem <<= 20;
-              break;
-      case 'K':
-      case 'k':
-              mem <<= 10;
-              /* fall through */
-      default:
-              break;
-      }
-
-    See: https://www.kernel.org/doc/html/latest/process/coding-style.html#indentation
+    See: https://www.kernel.org/doc/html/latest/process/coding-style.html#spaces
 
   **TRAILING_WHITESPACE**
     Trailing whitespace should always be removed.
     Some editors highlight the trailing whitespace and cause visual
     distractions when editing files.
+
     See: https://www.kernel.org/doc/html/latest/process/coding-style.html#spaces
 
+  **UNNECESSARY_PARENTHESES**
+    Parentheses are not required in the following cases:
+
+      1. Function pointer uses::
+
+          (foo->bar)();
+
+        could be::
+
+          foo->bar();
+
+      2. Comparisons in if::
+
+          if ((foo->bar) && (foo->baz))
+          if ((foo == bar))
+
+        could be::
+
+          if (foo->bar && foo->baz)
+          if (foo == bar)
+
+      3. addressof/dereference single Lvalues::
+
+          &(foo->bar)
+          *(foo->bar)
+
+        could be::
+
+          &foo->bar
+          *foo->bar
+
   **WHILE_AFTER_BRACE**
     while should follow the closing bracket on the same line::
 
@@ -723,17 +1186,50 @@ Others
     The patch seems to be corrupted or lines are wrapped.
     Please regenerate the patch file before sending it to the maintainer.
 
+  **CVS_KEYWORD**
+    Since linux moved to git, the CVS markers are no longer used.
+    So, CVS style keywords ($Id$, $Revision$, $Log$) should not be
+    added.
+
+  **DEFAULT_NO_BREAK**
+    switch default case is sometimes written as "default:;".  This can
+    cause new cases added below default to be defective.
+
+    A "break;" should be added after empty default statement to avoid
+    unwanted fallthrough.
+
   **DOS_LINE_ENDINGS**
     For DOS-formatted patches, there are extra ^M symbols at the end of
     the line.  These should be removed.
 
-  **EXECUTE_PERMISSIONS**
-    There is no reason for source files to be executable.  The executable
-    bit can be removed safely.
+  **DT_SCHEMA_BINDING_PATCH**
+    DT bindings moved to a json-schema based format instead of
+    freeform text.
 
-  **NON_OCTAL_PERMISSIONS**
-    Permission bits should use 4 digit octal permissions (like 0700 or 0444).
-    Avoid using any other base like decimal.
+    See: https://www.kernel.org/doc/html/latest/devicetree/bindings/writing-schema.html
+
+  **DT_SPLIT_BINDING_PATCH**
+    Devicetree bindings should be their own patch.  This is because
+    bindings are logically independent from a driver implementation,
+    they have a different maintainer (even though they often
+    are applied via the same tree), and it makes for a cleaner history in the
+    DT only tree created with git-filter-branch.
+
+    See: https://www.kernel.org/doc/html/latest/devicetree/bindings/submitting-patches.html#i-for-patch-submitters
+
+  **EMBEDDED_FILENAME**
+    Embedding the complete filename path inside the file isn't particularly
+    useful as often the path is moved around and becomes incorrect.
+
+  **FILE_PATH_CHANGES**
+    Whenever files are added, moved, or deleted, the MAINTAINERS file
+    patterns can be out of sync or outdated.
+
+    So MAINTAINERS might need updating in these cases.
+
+  **MEMSET**
+    The memset use appears to be incorrect.  This may be caused due to
+    badly ordered parameters.  Please recheck the usage.
 
   **NOT_UNIFIED_DIFF**
     The patch file does not appear to be in unified-diff format.  Please
@@ -742,14 +1238,12 @@ Others
   **PRINTF_0XDECIMAL**
     Prefixing 0x with decimal output is defective and should be corrected.
 
-  **TRAILING_STATEMENTS**
-    Trailing statements (for example after any conditional) should be
-    on the next line.
-    Like::
+  **SPDX_LICENSE_TAG**
+    The source file is missing or has an improper SPDX identifier tag.
+    The Linux kernel requires the precise SPDX identifier in all source files,
+    and it is thoroughly documented in the kernel docs.
 
-      if (x == y) break;
+    See: https://www.kernel.org/doc/html/latest/process/license-rules.html
 
-    should be::
-
-      if (x == y)
-              break;
+  **TYPO_SPELLING**
+    Some words may have been misspelled.  Consider reviewing them.
scripts/checkpatch.pl +98 -47

269 lines not on this page · raw message

scripts/spdxcheck.py +1 -1
index 3e784cf9f40..ebd06ae642c 100755
@@ -44,7 +44,7 @@ def read_spdxdata(repo):
                 continue
 
             exception = None
-            for l in open(el.path).readlines():
+            for l in open(el.path, encoding="utf-8").readlines():
                 if l.startswith('Valid-License-Identifier:'):
                     lid = l.split(':')[1].strip().upper()
                     if lid in spdx.licenses:
Signature · 1 line
2.35.0.rc0.227.g00780c9af4-goog
#2 lore raw

Re: [PATCH v5 1/4] scripts/checkpatch.pl: Resync with v5.16

Quoted 8 lines · Simon Glass

This resyncs us with the version found in v5.16 of the Linux kernel with the following exceptions:
- Keep our u-boot specific tests / code area.
- Change the location of checkpatch.rst
- Drop the "use strscpy" test as we don't have that, but do have strlcpy and want that used now.
- Keep debug/printf in the list for $logFunctions

Quoted 4 lines

This also syncs the spdxcheck.py tool and all the associated documentation.
S

Applied to u-boot/master, thanks!

Signature · 1 line
Tom
#3 lore raw

PATCH v5 2/4 efi: Use 16-bit unicode strings

In reply to Simon Glass

At present we use wide characters for unicode but this is not necessary. Change the code to use the 'u' literal instead. This helps to fix build warnings for sandbox on rpi.

---

(no changes since v4)

Changes in v4:
- Rebase to master

Changes in v3:
- Change some things EFI things missed (or new since) last time

 cmd/efidebug.c                                |  28 ++---
 include/efi_loader.h                          |   2 +-
 include/efi_selftest.h                        |   4 +-
 lib/efi_loader/efi_bootmgr.c                  |  12 +-
 lib/efi_loader/efi_boottime.c                 |   2 +-
 lib/efi_loader/efi_capsule.c                  |  22 ++--
 lib/efi_loader/efi_helper.c                   |   2 +-
 lib/efi_loader/efi_image_loader.c             |   8 +-
 lib/efi_loader/efi_setup.c                    |  14 +--
 lib/efi_loader/efi_string.c                   |   2 +-
 lib/efi_loader/efi_tcg2.c                     |   4 +-
 lib/efi_loader/efi_var_common.c               |  12 +-
 lib/efi_loader/efi_variable.c                 |   6 +-
 lib/efi_loader/efi_variable_tee.c             |   2 +-
 lib/efi_loader/helloworld.c                   |  40 +++----
 lib/efi_selftest/dtbdump.c                    |  82 +++++++-------
 lib/efi_selftest/efi_selftest.c               |   2 +-
 lib/efi_selftest/efi_selftest_block_device.c  |   6 +-
 lib/efi_selftest/efi_selftest_devicepath.c    |   2 +-
 lib/efi_selftest/efi_selftest_exception.c     |   2 +-
 lib/efi_selftest/efi_selftest_fdt.c           |   6 +-
 lib/efi_selftest/efi_selftest_hii.c           |   8 +-
 lib/efi_selftest/efi_selftest_load_file.c     |   4 +-
 lib/efi_selftest/efi_selftest_loadimage.c     |   4 +-
 .../efi_selftest_miniapp_exception.c          |   4 +-
 lib/efi_selftest/efi_selftest_miniapp_exit.c  |   8 +-
 .../efi_selftest_miniapp_return.c             |   2 +-
 lib/efi_selftest/efi_selftest_reset.c         |   2 +-
 lib/efi_selftest/efi_selftest_textoutput.c    |  12 +-
 .../efi_selftest_unicode_collation.c          |  38 +++----
 lib/efi_selftest/efi_selftest_util.c          | 106 +++++++++---------
 lib/efi_selftest/efi_selftest_variables.c     |  22 ++--
 .../efi_selftest_variables_runtime.c          |   4 +-
 lib/efi_selftest/initrddump.c                 |  60 +++++-----
 34 files changed, 267 insertions(+), 267 deletions(-)
cmd/efidebug.c +14 -14
index 66ce0fc3058..401d13cc4ca 100644
@@ -240,7 +240,7 @@ static int do_efi_capsule_res(struct cmd_tbl *cmdtp, int flag,
 	guid = efi_guid_capsule_report;
 	if (argc == 1) {
 		size = sizeof(var_name16);
-		ret = efi_get_variable_int(L"CapsuleLast", &guid, NULL,
+		ret = efi_get_variable_int(u"CapsuleLast", &guid, NULL,
 					   &size, var_name16, NULL);
 
 		if (ret != EFI_SUCCESS) {
@@ -1120,7 +1120,7 @@ static int do_efi_boot_dump(struct cmd_tbl *cmdtp, int flag,
 			return CMD_RET_FAILURE;
 		}
 
-		if (memcmp(var_name16, L"Boot", 8))
+		if (memcmp(var_name16, u"Boot", 8))
 			continue;
 
 		for (id = 0, i = 0; i < 4; i++) {
@@ -1156,7 +1156,7 @@ static int show_efi_boot_order(void)
 	efi_status_t ret;
 
 	size = 0;
-	ret = EFI_CALL(efi_get_variable(L"BootOrder", &efi_global_variable_guid,
+	ret = EFI_CALL(efi_get_variable(u"BootOrder", &efi_global_variable_guid,
 					NULL, &size, NULL));
 	if (ret != EFI_BUFFER_TOO_SMALL) {
 		if (ret == EFI_NOT_FOUND) {
@@ -1171,7 +1171,7 @@ static int show_efi_boot_order(void)
 		printf("ERROR: Out of memory\n");
 		return CMD_RET_FAILURE;
 	}
-	ret = EFI_CALL(efi_get_variable(L"BootOrder", &efi_global_variable_guid,
+	ret = EFI_CALL(efi_get_variable(u"BootOrder", &efi_global_variable_guid,
 					NULL, &size, bootorder));
 	if (ret != EFI_SUCCESS) {
 		ret = CMD_RET_FAILURE;
@@ -1260,11 +1260,11 @@ static int do_efi_boot_next(struct cmd_tbl *cmdtp, int flag,
 
 	guid = efi_global_variable_guid;
 	size = sizeof(u16);
-	ret = efi_set_variable_int(L"BootNext", &guid,
-					EFI_VARIABLE_NON_VOLATILE |
-					EFI_VARIABLE_BOOTSERVICE_ACCESS |
-					EFI_VARIABLE_RUNTIME_ACCESS,
-					size, &bootnext, false);
+	ret = efi_set_variable_int(u"BootNext", &guid,
+				   EFI_VARIABLE_NON_VOLATILE |
+				   EFI_VARIABLE_BOOTSERVICE_ACCESS |
+				   EFI_VARIABLE_RUNTIME_ACCESS,
+				   size, &bootnext, false);
 	if (ret != EFI_SUCCESS) {
 		printf("Cannot set BootNext\n");
 		r = CMD_RET_FAILURE;
@@ -1321,11 +1321,11 @@ static int do_efi_boot_order(struct cmd_tbl *cmdtp, int flag,
 	}
 
 	guid = efi_global_variable_guid;
-	ret = efi_set_variable_int(L"BootOrder", &guid,
-					EFI_VARIABLE_NON_VOLATILE |
-					EFI_VARIABLE_BOOTSERVICE_ACCESS |
-					EFI_VARIABLE_RUNTIME_ACCESS,
-					size, bootorder, true);
+	ret = efi_set_variable_int(u"BootOrder", &guid,
+				   EFI_VARIABLE_NON_VOLATILE |
+				   EFI_VARIABLE_BOOTSERVICE_ACCESS |
+				   EFI_VARIABLE_RUNTIME_ACCESS,
+				   size, bootorder, true);
 	if (ret != EFI_SUCCESS) {
 		printf("Cannot set BootOrder\n");
 		r = CMD_RET_FAILURE;
include/efi_loader.h +1 -1
index 701efcd2b62..bcd20ad6657 100644
@@ -971,7 +971,7 @@ efi_status_t efi_capsule_authenticate(const void *capsule,
 				      efi_uintn_t capsule_size,
 				      void **image, efi_uintn_t *image_size);
 
-#define EFI_CAPSULE_DIR L"\\EFI\\UpdateCapsule\\"
+#define EFI_CAPSULE_DIR u"\\EFI\\UpdateCapsule\\"
 
 /**
  * Install the ESRT system table.
include/efi_selftest.h +2 -2
index 94ceb147330..5340cefbb6f 100644
@@ -16,7 +16,7 @@
 
 #define EFI_ST_SUCCESS 0
 #define EFI_ST_FAILURE 1
-#define EFI_ST_SUCCESS_STR L"SUCCESS"
+#define EFI_ST_SUCCESS_STR u"SUCCESS"
 
 /**
  * efi_st_printf() - print a message
@@ -111,7 +111,7 @@ u16 *efi_st_translate_char(u16 code);
  * efi_st_translate_code() - translate a scan code to a human readable string
  *
  * This function translates the scan code returned by the simple text input
- * protocol to a human readable string, e.g. 0x04 is translated to L"Left".
+ * protocol to a human readable string, e.g. 0x04 is translated to u"Left".
  *
  * @code:	scan code
  * Return:	Unicode string
lib/efi_loader/efi_bootmgr.c +6 -6
index 1fe19237f9a..8c04ecbdc83 100644
@@ -46,8 +46,8 @@ static efi_status_t try_load_entry(u16 n, efi_handle_t *handle,
 				   void **load_options)
 {
 	struct efi_load_option lo;
-	u16 varname[] = L"Boot0000";
-	u16 hexmap[] = L"0123456789ABCDEF";
+	u16 varname[] = u"Boot0000";
+	u16 hexmap[] = u"0123456789ABCDEF";
 	void *load_option;
 	efi_uintn_t size;
 	efi_status_t ret;
@@ -83,7 +83,7 @@ static efi_status_t try_load_entry(u16 n, efi_handle_t *handle,
 
 		attributes = EFI_VARIABLE_BOOTSERVICE_ACCESS |
 			     EFI_VARIABLE_RUNTIME_ACCESS;
-		ret = efi_set_variable_int(L"BootCurrent",
+		ret = efi_set_variable_int(u"BootCurrent",
 					   &efi_global_variable_guid,
 					   attributes, sizeof(n), &n, false);
 		if (ret != EFI_SUCCESS)
@@ -149,7 +149,7 @@ efi_status_t efi_bootmgr_load(efi_handle_t *handle, void **load_options)
 
 	/* BootNext */
 	size = sizeof(bootnext);
-	ret = efi_get_variable_int(L"BootNext",
+	ret = efi_get_variable_int(u"BootNext",
 				   &efi_global_variable_guid,
 				   NULL, &size, &bootnext, NULL);
 	if (ret == EFI_SUCCESS || ret == EFI_BUFFER_TOO_SMALL) {
@@ -158,7 +158,7 @@ efi_status_t efi_bootmgr_load(efi_handle_t *handle, void **load_options)
 			log_err("BootNext must be 16-bit integer\n");
 
 		/* delete BootNext */
-		ret = efi_set_variable_int(L"BootNext",
+		ret = efi_set_variable_int(u"BootNext",
 					   &efi_global_variable_guid,
 					   0, 0, NULL, false);
 
@@ -178,7 +178,7 @@ efi_status_t efi_bootmgr_load(efi_handle_t *handle, void **load_options)
 	}
 
 	/* BootOrder */
-	bootorder = efi_get_var(L"BootOrder", &efi_global_variable_guid, &size);
+	bootorder = efi_get_var(u"BootOrder", &efi_global_variable_guid, &size);
 	if (!bootorder) {
 		log_info("BootOrder not defined\n");
 		ret = EFI_NOT_FOUND;
lib/efi_loader/efi_boottime.c +1 -1
index 37b9c68b6e9..1ea04de9065 100644
@@ -3778,7 +3778,7 @@ static struct efi_boot_services efi_boot_services = {
 	.create_event_ex = efi_create_event_ex,
 };
 
-static u16 __efi_runtime_data firmware_vendor[] = L"Das U-Boot";
+static u16 __efi_runtime_data firmware_vendor[] = u"Das U-Boot";
 
 struct efi_system_table __efi_runtime_data systab = {
 	.hdr = {
lib/efi_loader/efi_capsule.c +11 -11
index 4463ae00fd0..f4519c73178 100644
@@ -56,10 +56,10 @@ static __maybe_unused unsigned int get_last_capsule(void)
 	int i;
 
 	size = sizeof(value16);
-	ret = efi_get_variable_int(L"CapsuleLast", &efi_guid_capsule_report,
+	ret = efi_get_variable_int(u"CapsuleLast", &efi_guid_capsule_report,
 				   NULL, &size, value16, NULL);
 	if (ret != EFI_SUCCESS || size != 22 ||
-	    u16_strncmp(value16, L"Capsule", 7))
+	    u16_strncmp(value16, u"Capsule", 7))
 		goto err;
 	for (i = 0; i < 4; ++i) {
 		u16 c = value16[i + 7];
@@ -113,14 +113,14 @@ void set_capsule_result(int index, struct efi_capsule_header *capsule,
 	}
 
 	/* Variable CapsuleLast must not include terminating 0x0000 */
-	ret = efi_set_variable_int(L"CapsuleLast", &efi_guid_capsule_report,
+	ret = efi_set_variable_int(u"CapsuleLast", &efi_guid_capsule_report,
 				   EFI_VARIABLE_READ_ONLY |
 				   EFI_VARIABLE_NON_VOLATILE |
 				   EFI_VARIABLE_BOOTSERVICE_ACCESS |
 				   EFI_VARIABLE_RUNTIME_ACCESS,
 				   22, variable_name16, false);
 	if (ret != EFI_SUCCESS)
-		log_err("Setting %ls failed\n", L"CapsuleLast");
+		log_err("Setting %ls failed\n", u"CapsuleLast");
 }
 
 #ifdef CONFIG_EFI_CAPSULE_FIRMWARE_MANAGEMENT
@@ -707,7 +707,7 @@ static efi_status_t find_boot_device(void)
 	/* find active boot device in BootNext */
 	bootnext = 0;
 	size = sizeof(bootnext);
-	ret = efi_get_variable_int(L"BootNext",
+	ret = efi_get_variable_int(u"BootNext",
 				   (efi_guid_t *)&efi_global_variable_guid,
 				   NULL, &size, &bootnext, NULL);
 	if (ret == EFI_SUCCESS || ret == EFI_BUFFER_TOO_SMALL) {
@@ -734,7 +734,7 @@ static efi_status_t find_boot_device(void)
 skip:
 	/* find active boot device in BootOrder */
 	size = 0;
-	ret = efi_get_variable_int(L"BootOrder", &efi_global_variable_guid,
+	ret = efi_get_variable_int(u"BootOrder", &efi_global_variable_guid,
 				   NULL, &size, NULL, NULL);
 	if (ret == EFI_BUFFER_TOO_SMALL) {
 		boot_order = malloc(size);
@@ -743,7 +743,7 @@ skip:
 			goto out;
 		}
 
-		ret = efi_get_variable_int(L"BootOrder",
+		ret = efi_get_variable_int(u"BootOrder",
 					   &efi_global_variable_guid,
 					   NULL, &size, boot_order, NULL);
 	}
@@ -875,8 +875,8 @@ static efi_status_t efi_capsule_scan_dir(u16 ***files, unsigned int *num)
 			break;
 
 		if (!(dirent->attribute & EFI_FILE_DIRECTORY) &&
-		    u16_strcmp(dirent->file_name, L".") &&
-		    u16_strcmp(dirent->file_name, L".."))
+		    u16_strcmp(dirent->file_name, u".") &&
+		    u16_strcmp(dirent->file_name, u".."))
 			tmp_files[count++] = u16_strdup(dirent->file_name);
 	}
 	/* ignore an error */
@@ -1052,7 +1052,7 @@ static efi_status_t check_run_capsules(void)
 	efi_status_t r;
 
 	size = sizeof(os_indications);
-	r = efi_get_variable_int(L"OsIndications", &efi_global_variable_guid,
+	r = efi_get_variable_int(u"OsIndications", &efi_global_variable_guid,
 				 NULL, &size, &os_indications, NULL);
 	if (r != EFI_SUCCESS || size != sizeof(os_indications))
 		return EFI_NOT_FOUND;
@@ -1061,7 +1061,7 @@ static efi_status_t check_run_capsules(void)
 	    EFI_OS_INDICATIONS_FILE_CAPSULE_DELIVERY_SUPPORTED) {
 		os_indications &=
 			~EFI_OS_INDICATIONS_FILE_CAPSULE_DELIVERY_SUPPORTED;
-		r = efi_set_variable_int(L"OsIndications",
+		r = efi_set_variable_int(u"OsIndications",
 					 &efi_global_variable_guid,
 					 EFI_VARIABLE_NON_VOLATILE |
 					 EFI_VARIABLE_BOOTSERVICE_ACCESS |
lib/efi_loader/efi_helper.c +1 -1
index b80a6e07dff..802d39ed97b 100644
@@ -36,7 +36,7 @@ static efi_status_t efi_create_current_boot_var(u16 var_name[],
 	u16 *pos;
 
 	boot_current_size = sizeof(boot_current);
-	ret = efi_get_variable_int(L"BootCurrent",
+	ret = efi_get_variable_int(u"BootCurrent",
 				   &efi_global_variable_guid, NULL,
 				   &boot_current_size, &boot_current, NULL);
 	if (ret != EFI_SUCCESS)
lib/efi_loader/efi_image_loader.c +4 -4
index 255613eb72b..a83c3ed32e8 100644
@@ -532,13 +532,13 @@ static bool efi_image_unsigned_authenticate(struct efi_image_regions *regs)
 	struct efi_signature_store *db = NULL, *dbx = NULL;
 	bool ret = false;
 
-	dbx = efi_sigstore_parse_sigdb(L"dbx");
+	dbx = efi_sigstore_parse_sigdb(u"dbx");
 	if (!dbx) {
 		EFI_PRINT("Getting signature database(dbx) failed\n");
 		goto out;
 	}
 
-	db = efi_sigstore_parse_sigdb(L"db");
+	db = efi_sigstore_parse_sigdb(u"db");
 	if (!db) {
 		EFI_PRINT("Getting signature database(db) failed\n");
 		goto out;
@@ -621,13 +621,13 @@ static bool efi_image_authenticate(void *efi, size_t efi_size)
 	/*
 	 * verify signature using db and dbx
 	 */
-	db = efi_sigstore_parse_sigdb(L"db");
+	db = efi_sigstore_parse_sigdb(u"db");
 	if (!db) {
 		EFI_PRINT("Getting signature database(db) failed\n");
 		goto err;
 	}
 
-	dbx = efi_sigstore_parse_sigdb(L"dbx");
+	dbx = efi_sigstore_parse_sigdb(u"dbx");
 	if (!dbx) {
 		EFI_PRINT("Getting signature database(dbx) failed\n");
 		goto err;
lib/efi_loader/efi_setup.c +7 -7
index 49172e35798..e4109b9e849 100644
@@ -43,7 +43,7 @@ static efi_status_t efi_init_platform_lang(void)
 	 * Variable PlatformLangCodes defines the language codes that the
 	 * machine can support.
 	 */
-	ret = efi_set_variable_int(L"PlatformLangCodes",
+	ret = efi_set_variable_int(u"PlatformLangCodes",
 				   &efi_global_variable_guid,
 				   EFI_VARIABLE_BOOTSERVICE_ACCESS |
 				   EFI_VARIABLE_RUNTIME_ACCESS |
@@ -57,7 +57,7 @@ static efi_status_t efi_init_platform_lang(void)
 	 * Variable PlatformLang defines the language that the machine has been
 	 * configured for.
 	 */
-	ret = efi_get_variable_int(L"PlatformLang",
+	ret = efi_get_variable_int(u"PlatformLang",
 				   &efi_global_variable_guid,
 				   NULL, &data_size, &pos, NULL);
 	if (ret == EFI_BUFFER_TOO_SMALL) {
@@ -74,7 +74,7 @@ static efi_status_t efi_init_platform_lang(void)
 	if (pos)
 		*pos = 0;
 
-	ret = efi_set_variable_int(L"PlatformLang",
+	ret = efi_set_variable_int(u"PlatformLang",
 				   &efi_global_variable_guid,
 				   EFI_VARIABLE_NON_VOLATILE |
 				   EFI_VARIABLE_BOOTSERVICE_ACCESS |
@@ -100,7 +100,7 @@ static efi_status_t efi_init_secure_boot(void)
 	};
 	efi_status_t ret;
 
-	ret = efi_set_variable_int(L"SignatureSupport",
+	ret = efi_set_variable_int(u"SignatureSupport",
 				   &efi_global_variable_guid,
 				   EFI_VARIABLE_READ_ONLY |
 				   EFI_VARIABLE_BOOTSERVICE_ACCESS |
@@ -129,12 +129,12 @@ static efi_status_t efi_init_capsule(void)
 	efi_status_t ret = EFI_SUCCESS;
 
 	if (IS_ENABLED(CONFIG_EFI_HAVE_CAPSULE_UPDATE)) {
-		ret = efi_set_variable_int(L"CapsuleMax",
+		ret = efi_set_variable_int(u"CapsuleMax",
 					   &efi_guid_capsule_report,
 					   EFI_VARIABLE_READ_ONLY |
 					   EFI_VARIABLE_BOOTSERVICE_ACCESS |
 					   EFI_VARIABLE_RUNTIME_ACCESS,
-					   22, L"CapsuleFFFF", false);
+					   22, u"CapsuleFFFF", false);
 		if (ret != EFI_SUCCESS)
 			printf("EFI: cannot initialize CapsuleMax variable\n");
 	}
@@ -165,7 +165,7 @@ static efi_status_t efi_init_os_indications(void)
 		os_indications_supported |=
 			EFI_OS_INDICATIONS_FMP_CAPSULE_SUPPORTED;
 
-	return efi_set_variable_int(L"OsIndicationsSupported",
+	return efi_set_variable_int(u"OsIndicationsSupported",
 				    &efi_global_variable_guid,
 				    EFI_VARIABLE_BOOTSERVICE_ACCESS |
 				    EFI_VARIABLE_RUNTIME_ACCESS |
lib/efi_loader/efi_string.c +1 -1
index a3b8edf5a80..8bf1e493b89 100644
@@ -16,7 +16,7 @@
  * @index:	Index
  *
  * Create a utf-16 string with @name, appending @index.
- * For example, L"Capsule0001"
+ * For example, u"Capsule0001"
  *
  * The caller must ensure that the buffer has enough space for the resulting
  * string including the trailing L'\0'.
lib/efi_loader/efi_tcg2.c +2 -2
index 0ae07ef0839..99ec3a54867 100644
@@ -1916,8 +1916,8 @@ static efi_status_t tcg2_measure_boot_variable(struct udevice *dev)
 {
 	u16 *boot_order;
 	u16 *boot_index;
-	u16 var_name[] = L"BootOrder";
-	u16 boot_name[] = L"Boot####";
+	u16 var_name[] = u"BootOrder";
+	u16 boot_name[] = u"Boot####";
 	u8 *bootvar;
 	efi_uintn_t var_data_size;
 	u32 count, i;
lib/efi_loader/efi_var_common.c +6 -6
index 9f1dd74f36c..eb837027818 100644
@@ -229,26 +229,26 @@ static efi_status_t efi_set_secure_state(u8 secure_boot, u8 setup_mode,
 
 	efi_secure_boot = secure_boot;
 
-	ret = efi_set_variable_int(L"SecureBoot", &efi_global_variable_guid,
+	ret = efi_set_variable_int(u"SecureBoot", &efi_global_variable_guid,
 				   attributes_ro, sizeof(secure_boot),
 				   &secure_boot, false);
 	if (ret != EFI_SUCCESS)
 		goto err;
 
-	ret = efi_set_variable_int(L"SetupMode", &efi_global_variable_guid,
+	ret = efi_set_variable_int(u"SetupMode", &efi_global_variable_guid,
 				   attributes_ro, sizeof(setup_mode),
 				   &setup_mode, false);
 	if (ret != EFI_SUCCESS)
 		goto err;
 
-	ret = efi_set_variable_int(L"AuditMode", &efi_global_variable_guid,
+	ret = efi_set_variable_int(u"AuditMode", &efi_global_variable_guid,
 				   audit_mode || setup_mode ?
 				   attributes_ro : attributes_rw,
 				   sizeof(audit_mode), &audit_mode, false);
 	if (ret != EFI_SUCCESS)
 		goto err;
 
-	ret = efi_set_variable_int(L"DeployedMode",
+	ret = efi_set_variable_int(u"DeployedMode",
 				   &efi_global_variable_guid,
 				   audit_mode || deployed_mode || setup_mode ?
 				   attributes_ro : attributes_rw,
@@ -280,7 +280,7 @@ static efi_status_t efi_transfer_secure_state(enum efi_secure_mode mode)
 		if (ret != EFI_SUCCESS)
 			goto err;
 	} else if (mode == EFI_MODE_AUDIT) {
-		ret = efi_set_variable_int(L"PK", &efi_global_variable_guid,
+		ret = efi_set_variable_int(u"PK", &efi_global_variable_guid,
 					   EFI_VARIABLE_BOOTSERVICE_ACCESS |
 					   EFI_VARIABLE_RUNTIME_ACCESS,
 					   0, NULL, false);
@@ -354,7 +354,7 @@ efi_status_t efi_init_secure_state(void)
 		return ret;
 
 	/* As we do not provide vendor keys this variable is always 0. */
-	ret = efi_set_variable_int(L"VendorKeys",
+	ret = efi_set_variable_int(u"VendorKeys",
 				   &efi_global_variable_guid,
 				   EFI_VARIABLE_BOOTSERVICE_ACCESS |
 				   EFI_VARIABLE_RUNTIME_ACCESS |
lib/efi_loader/efi_variable.c +3 -3
index 5adc7f821a8..8ca2d85694c 100644
@@ -145,15 +145,15 @@ static efi_status_t efi_variable_authenticate(const u16 *variable,
 	case EFI_AUTH_VAR_PK:
 	case EFI_AUTH_VAR_KEK:
 		/* with PK */
-		truststore = efi_sigstore_parse_sigdb(L"PK");
+		truststore = efi_sigstore_parse_sigdb(u"PK");
 		if (!truststore)
 			goto err;
 		break;
 	case EFI_AUTH_VAR_DB:
 	case EFI_AUTH_VAR_DBX:
 		/* with PK and KEK */
-		truststore = efi_sigstore_parse_sigdb(L"KEK");
-		truststore2 = efi_sigstore_parse_sigdb(L"PK");
+		truststore = efi_sigstore_parse_sigdb(u"KEK");
+		truststore2 = efi_sigstore_parse_sigdb(u"PK");
 		if (!truststore) {
 			if (!truststore2)
 				goto err;
lib/efi_loader/efi_variable_tee.c +1 -1
index a2c65e36947..58931c4efd7 100644
@@ -588,7 +588,7 @@ efi_status_t efi_set_variable_int(const u16 *variable_name,
 	if (alt_ret != EFI_SUCCESS)
 		goto out;
 
-	if (!u16_strcmp(variable_name, L"PK"))
+	if (!u16_strcmp(variable_name, u"PK"))
 		alt_ret = efi_init_secure_state();
 out:
 	free(comm_buf);
lib/efi_loader/helloworld.c +20 -20
index 3f215e2a46e..ec17c73a5e1 100644
@@ -34,7 +34,7 @@ static struct efi_simple_text_output_protocol *con_out;
  */
 static void print_uefi_revision(void)
 {
-	u16 rev[] = L"0.0.0";
+	u16 rev[] = u"0.0.0";
 
 	rev[0] = (systable->hdr.revision >> 16) + '0';
 	rev[4] = systable->hdr.revision & 0xffff;
@@ -48,9 +48,9 @@ static void print_uefi_revision(void)
 	else
 		rev[3] = 0;
 
-	con_out->output_string(con_out, L"Running on UEFI ");
+	con_out->output_string(con_out, u"Running on UEFI ");
 	con_out->output_string(con_out, rev);
-	con_out->output_string(con_out, L"\r\n");
+	con_out->output_string(con_out, u"\r\n");
 }
 
 /**
@@ -65,15 +65,15 @@ static void print_config_tables(void)
 		if (!memcmp(&systable->tables[i].guid, &fdt_guid,
 			    sizeof(efi_guid_t)))
 			con_out->output_string
-					(con_out, L"Have device tree\r\n");
+					(con_out, u"Have device tree\r\n");
 		if (!memcmp(&systable->tables[i].guid, &acpi_guid,
 			    sizeof(efi_guid_t)))
 			con_out->output_string
-					(con_out, L"Have ACPI 2.0 table\r\n");
+					(con_out, u"Have ACPI 2.0 table\r\n");
 		if (!memcmp(&systable->tables[i].guid, &smbios_guid,
 			    sizeof(efi_guid_t)))
 			con_out->output_string
-					(con_out, L"Have SMBIOS table\r\n");
+					(con_out, u"Have SMBIOS table\r\n");
 	}
 }
 
@@ -86,13 +86,13 @@ static void print_config_tables(void)
 void print_load_options(struct efi_loaded_image *loaded_image)
 {
 	/* Output the load options */
-	con_out->output_string(con_out, L"Load options: ");
+	con_out->output_string(con_out, u"Load options: ");
 	if (loaded_image->load_options_size && loaded_image->load_options)
 		con_out->output_string(con_out,
 				       (u16 *)loaded_image->load_options);
 	else
-		con_out->output_string(con_out, L"<none>");
-	con_out->output_string(con_out, L"\r\n");
+		con_out->output_string(con_out, u"<none>");
+	con_out->output_string(con_out, u"\r\n");
 }
 
 /**
@@ -108,21 +108,21 @@ efi_status_t print_device_path(struct efi_device_path *device_path,
 	efi_status_t ret;
 
 	if (!device_path) {
-		con_out->output_string(con_out, L"<none>\r\n");
+		con_out->output_string(con_out, u"<none>\r\n");
 		return EFI_SUCCESS;
 	}
 
 	string = dp2txt->convert_device_path_to_text(device_path, true, false);
 	if (!string) {
 		con_out->output_string
-			(con_out, L"Cannot convert device path to text\r\n");
+			(con_out, u"Cannot convert device path to text\r\n");
 		return EFI_OUT_OF_RESOURCES;
 	}
 	con_out->output_string(con_out, string);
-	con_out->output_string(con_out, L"\r\n");
+	con_out->output_string(con_out, u"\r\n");
 	ret = boottime->free_pool(string);
 	if (ret != EFI_SUCCESS) {
-		con_out->output_string(con_out, L"Cannot free pool memory\r\n");
+		con_out->output_string(con_out, u"Cannot free pool memory\r\n");
 		return ret;
 	}
 	return EFI_SUCCESS;
@@ -148,7 +148,7 @@ efi_status_t EFIAPI efi_main(efi_handle_t handle,
 	con_out = systable->con_out;
 
 	/* UEFI requires CR LF */
-	con_out->output_string(con_out, L"Hello, world!\r\n");
+	con_out->output_string(con_out, u"Hello, world!\r\n");
 
 	print_uefi_revision();
 	print_config_tables();
@@ -158,7 +158,7 @@ efi_status_t EFIAPI efi_main(efi_handle_t handle,
 					(void **)&loaded_image);
 	if (ret != EFI_SUCCESS) {
 		con_out->output_string
-			(con_out, L"Cannot open loaded image protocol\r\n");
+			(con_out, u"Cannot open loaded image protocol\r\n");
 		goto out;
 	}
 	print_load_options(loaded_image);
@@ -168,12 +168,12 @@ efi_status_t EFIAPI efi_main(efi_handle_t handle,
 					NULL, (void **)&device_path_to_text);
 	if (ret != EFI_SUCCESS) {
 		con_out->output_string
-			(con_out, L"Cannot open device path to text protocol\r\n");
+			(con_out, u"Cannot open device path to text protocol\r\n");
 		goto out;
 	}
 	if (!loaded_image->device_handle) {
 		con_out->output_string
-			(con_out, L"Missing device handle\r\n");
+			(con_out, u"Missing device handle\r\n");
 		goto out;
 	}
 	ret = boottime->handle_protocol(loaded_image->device_handle,
@@ -181,14 +181,14 @@ efi_status_t EFIAPI efi_main(efi_handle_t handle,
 					(void **)&device_path);
 	if (ret != EFI_SUCCESS) {
 		con_out->output_string
-			(con_out, L"Missing device path for device handle\r\n");
+			(con_out, u"Missing device path for device handle\r\n");
 		goto out;
 	}
-	con_out->output_string(con_out, L"Boot device: ");
+	con_out->output_string(con_out, u"Boot device: ");
 	ret = print_device_path(device_path, device_path_to_text);
 	if (ret != EFI_SUCCESS)
 		goto out;
-	con_out->output_string(con_out, L"File path: ");
+	con_out->output_string(con_out, u"File path: ");
 	ret = print_device_path(loaded_image->file_path, device_path_to_text);
 	if (ret != EFI_SUCCESS)
 		goto out;
lib/efi_selftest/dtbdump.c +41 -41

264 lines not on this page · raw message

lib/efi_selftest/efi_selftest.c +1 -1
index 3da34b1d46d..4a88ec69b53 100644
@@ -18,7 +18,7 @@ static const struct efi_system_table *systable;
 static const struct efi_boot_services *boottime;
 static const struct efi_runtime_services *runtime;
 static efi_handle_t handle;
-static u16 reset_message[] = L"Selftest completed";
+static u16 reset_message[] = u"Selftest completed";
 static int *setup_status;
 
 /*
lib/efi_selftest/efi_selftest_block_device.c +3 -3
index ad53dac796b..5e05d36716d 100644
@@ -407,7 +407,7 @@ static int execute(void)
 	}
 
 	/* Read file */
-	ret = root->open(root, &file, L"hello.txt", EFI_FILE_MODE_READ,
+	ret = root->open(root, &file, u"hello.txt", EFI_FILE_MODE_READ,
 			 0);
 	if (ret != EFI_SUCCESS) {
 		efi_st_error("Failed to open file\n");
@@ -451,7 +451,7 @@ static int execute(void)
 
 #ifdef CONFIG_FAT_WRITE
 	/* Write file */
-	ret = root->open(root, &file, L"u-boot.txt", EFI_FILE_MODE_READ |
+	ret = root->open(root, &file, u"u-boot.txt", EFI_FILE_MODE_READ |
 			 EFI_FILE_MODE_WRITE | EFI_FILE_MODE_CREATE, 0);
 	if (ret != EFI_SUCCESS) {
 		efi_st_error("Failed to open file\n");
@@ -483,7 +483,7 @@ static int execute(void)
 
 	/* Verify file */
 	boottime->set_mem(buf, sizeof(buf), 0);
-	ret = root->open(root, &file, L"u-boot.txt", EFI_FILE_MODE_READ,
+	ret = root->open(root, &file, u"u-boot.txt", EFI_FILE_MODE_READ,
 			 0);
 	if (ret != EFI_SUCCESS) {
 		efi_st_error("Failed to open file\n");
lib/efi_selftest/efi_selftest_devicepath.c +1 -1
index d87b9f7dcd0..8a22a5d4d9c 100644
@@ -319,7 +319,7 @@ static int execute(void)
 			{ DEVICE_PATH_TYPE_MEDIA_DEVICE,
 			  DEVICE_PATH_SUB_TYPE_FILE_PATH,
 			  sizeof(struct efi_device_path) + 12},
-			L"u-boot.bin",
+			u"u-boot.bin",
 		};
 	u16 *string;
 	efi_status_t ret;
lib/efi_selftest/efi_selftest_exception.c +1 -1
index d86228a8926..f3a810429af 100644
@@ -31,7 +31,7 @@ static struct {
 		DEVICE_PATH_SUB_TYPE_FILE_PATH,
 		sizeof(dp.dp) + sizeof(dp.filename),
 	},
-	L"bug.efi",
+	u"bug.efi",
 	{
 		DEVICE_PATH_TYPE_END,
 		DEVICE_PATH_SUB_TYPE_END,
lib/efi_selftest/efi_selftest_fdt.c +3 -3
index 739f029b8c7..4b49b5b8bd0 100644
@@ -199,7 +199,7 @@ static int execute(void)
 	char *str;
 	efi_status_t ret;
 
-	str = get_property(L"compatible", NULL);
+	str = get_property(u"compatible", NULL);
 	if (str) {
 		efi_st_printf("compatible: %s\n", str);
 		ret = boottime->free_pool(str);
@@ -211,7 +211,7 @@ static int execute(void)
 		efi_st_error("Missing property 'compatible'\n");
 		return EFI_ST_FAILURE;
 	}
-	str = get_property(L"serial-number", NULL);
+	str = get_property(u"serial-number", NULL);
 	if (str) {
 		efi_st_printf("serial-number: %s\n", str);
 		ret = boottime->free_pool(str);
@@ -220,7 +220,7 @@ static int execute(void)
 			return EFI_ST_FAILURE;
 		}
 	}
-	str = get_property(L"boot-hartid", L"chosen");
+	str = get_property(u"boot-hartid", u"chosen");
 	if (IS_ENABLED(CONFIG_RISCV)) {
 		if (str) {
 			efi_st_printf("boot-hartid: %u\n",
lib/efi_selftest/efi_selftest_hii.c +4 -4
index f4b70f79508..432b038475b 100644
@@ -699,7 +699,7 @@ static int test_hii_string_new_string(void)
 
 	ret = hii_string_protocol->new_string(hii_string_protocol, handle,
 					      &id, (u8 *)"en-US",
-					      L"Japanese", L"Japanese", NULL);
+					      u"Japanese", u"Japanese", NULL);
 	if (ret != EFI_SUCCESS) {
 		efi_st_error("new_string returned %u\n",
 			     (unsigned int)ret);
@@ -752,7 +752,7 @@ static int test_hii_string_get_string(void)
 
 	ret = hii_string_protocol->new_string(hii_string_protocol, handle,
 					      &id, (u8 *)"en-US",
-					      L"Japanese", L"Japanese", NULL);
+					      u"Japanese", u"Japanese", NULL);
 	if (ret != EFI_SUCCESS) {
 		efi_st_error("new_string returned %u\n",
 			     (unsigned int)ret);
@@ -831,7 +831,7 @@ static int test_hii_string_set_string(void)
 
 	ret = hii_string_protocol->new_string(hii_string_protocol, handle,
 					      &id, (u8 *)"en-US",
-					      L"Japanese", L"Japanese", NULL);
+					      u"Japanese", u"Japanese", NULL);
 	if (ret != EFI_SUCCESS) {
 		efi_st_error("new_string returned %u\n",
 			     (unsigned int)ret);
@@ -840,7 +840,7 @@ static int test_hii_string_set_string(void)
 
 	ret = hii_string_protocol->set_string(hii_string_protocol, handle,
 					      id, (u8 *)"en-US",
-					      L"Nihongo", NULL);
+					      u"Nihongo", NULL);
 	if (ret != EFI_SUCCESS) {
 		efi_st_error("set_string returned %u\n",
 			     (unsigned int)ret);
lib/efi_selftest/efi_selftest_load_file.c +2 -2
index bf955cbf663..f8c637791f9 100644
@@ -101,7 +101,7 @@ static struct {
 			FILE_NAME_SIZE * sizeof(u16),
 		}
 	},
-	L"\\lf.efi",
+	u"\\lf.efi",
 	{
 		DEVICE_PATH_TYPE_END,
 		DEVICE_PATH_SUB_TYPE_END,
@@ -152,7 +152,7 @@ static struct {
 			FILE_NAME_SIZE * sizeof(u16),
 		}
 	},
-	L"\\lf2.efi",
+	u"\\lf2.efi",
 	{
 		DEVICE_PATH_TYPE_END,
 		DEVICE_PATH_SUB_TYPE_END,
lib/efi_selftest/efi_selftest_loadimage.c +2 -2
index 4975d80ff1c..522722e01fe 100644
@@ -20,8 +20,8 @@
 /* Binary logarithm of the block size */
 #define LB_BLOCK_SIZE 9
 
-#define FILE_NAME L"app.efi"
-#define VOLUME_NAME L"EfiDisk"
+#define FILE_NAME u"app.efi"
+#define VOLUME_NAME u"EfiDisk"
 
 static struct efi_boot_services *boottime;
 static efi_handle_t handle_image;
lib/efi_selftest/efi_selftest_miniapp_exception.c +2 -2
index 9be0e7e3eb1..79f9a67859b 100644
@@ -23,7 +23,7 @@ efi_status_t EFIAPI efi_main(efi_handle_t handle,
 	struct efi_simple_text_output_protocol *con_out = systable->con_out;
 
 	con_out->output_string(con_out,
-			       L"EFI application triggers exception.\n");
+			       u"EFI application triggers exception.\n");
 
 #if defined(CONFIG_ARM)
 	/*
@@ -38,6 +38,6 @@ efi_status_t EFIAPI efi_main(efi_handle_t handle,
 #elif defined(CONFIG_X86)
 	asm volatile (".word 0xffff\n");
 #endif
-	con_out->output_string(con_out, L"Exception not triggered.\n");
+	con_out->output_string(con_out, u"Exception not triggered.\n");
 	return EFI_ABORTED;
 }
lib/efi_selftest/efi_selftest_miniapp_exit.c +4 -4
index 6b5cfb01cf7..77a1869e47d 100644
@@ -40,7 +40,7 @@ static efi_status_t EFIAPI check_loaded_image_protocol
 				  NULL, EFI_OPEN_PROTOCOL_GET_PROTOCOL);
 	if (ret != EFI_SUCCESS) {
 		cout->output_string(cout,
-				    L"Could not open loaded image protocol");
+				    u"Could not open loaded image protocol");
 		return ret;
 	}
 	if ((void *)check_loaded_image_protocol <
@@ -49,7 +49,7 @@ static efi_status_t EFIAPI check_loaded_image_protocol
 	    loaded_image_protocol->image_base +
 	    loaded_image_protocol->image_size) {
 		cout->output_string(cout,
-				    L"Incorrect image_base or image_size\n");
+				    u"Incorrect image_base or image_size\n");
 		return EFI_NOT_FOUND;
 	}
 	return EFI_SUCCESS;
@@ -69,11 +69,11 @@ efi_status_t EFIAPI efi_main(efi_handle_t handle,
 	efi_status_t ret;
 	u16 text[] = EFI_ST_SUCCESS_STR;
 
-	con_out->output_string(con_out, L"EFI application calling Exit\n");
+	con_out->output_string(con_out, u"EFI application calling Exit\n");
 
 	if (check_loaded_image_protocol(handle, systable) != EFI_SUCCESS) {
 		con_out->output_string(con_out,
-				       L"Loaded image protocol missing\n");
+				       u"Loaded image protocol missing\n");
 		ret = EFI_NOT_FOUND;
 		goto out;
 	}
lib/efi_selftest/efi_selftest_miniapp_return.c +1 -1
index 25a2bd16373..45366aa9c63 100644
@@ -24,7 +24,7 @@ efi_status_t EFIAPI efi_main(efi_handle_t handle,
 	struct efi_simple_text_output_protocol *con_out = systable->con_out;
 
 	con_out->output_string(con_out,
-			       L"EFI application returning w/o calling Exit\n");
+			       u"EFI application returning w/o calling Exit\n");
 
 	/* The return value is checked by the calling test */
 	return EFI_INCOMPATIBLE_VERSION;
lib/efi_selftest/efi_selftest_reset.c +1 -1
index 8b6ac24cb15..24e8cc06bd4 100644
@@ -33,7 +33,7 @@ static int setup(const efi_handle_t handle,
  */
 static int execute(void)
 {
-	u16 reset_data[] = L"Reset by selftest";
+	u16 reset_data[] = u"Reset by selftest";
 
 	runtime->reset_system(EFI_RESET_COLD, EFI_SUCCESS,
 			      sizeof(reset_data), reset_data);
lib/efi_selftest/efi_selftest_textoutput.c +6 -6
index a87f65e197f..f6b029df23d 100644
@@ -44,14 +44,14 @@ static int execute(void)
 	}
 	/* TestString */
 	ret = con_out->test_string(con_out,
-			L" !\"#$%&'()*+,-./0-9:;<=>?@A-Z[\\]^_`a-z{|}~\n");
+			u" !\"#$%&'()*+,-./0-9:;<=>?@A-Z[\\]^_`a-z{|}~\n");
 	if (ret != EFI_ST_SUCCESS) {
 		efi_st_error("TestString failed for ANSI characters\n");
 		return EFI_ST_FAILURE;
 	}
 	/* OutputString */
 	ret = con_out->output_string(con_out,
-				     L"Testing cursor column update\n");
+				     u"Testing cursor column update\n");
 	if (ret != EFI_ST_SUCCESS) {
 		efi_st_error("OutputString failed for ANSI characters");
 		return EFI_ST_FAILURE;
@@ -75,7 +75,7 @@ static int execute(void)
 		efi_st_error("Cursor column not 0 at beginning of line\n");
 		return EFI_ST_FAILURE;
 	}
-	ret = con_out->output_string(con_out, L"123");
+	ret = con_out->output_string(con_out, u"123");
 	if (ret != EFI_ST_SUCCESS) {
 		efi_st_error("OutputString failed for ANSI characters\n");
 		return EFI_ST_FAILURE;
@@ -84,7 +84,7 @@ static int execute(void)
 		efi_st_error("Cursor column not incremented properly\n");
 		return EFI_ST_FAILURE;
 	}
-	ret = con_out->output_string(con_out, L"\b");
+	ret = con_out->output_string(con_out, u"\b");
 	if (ret != EFI_ST_SUCCESS) {
 		efi_st_error("OutputString failed for backspace\n");
 		return EFI_ST_FAILURE;
@@ -93,7 +93,7 @@ static int execute(void)
 		efi_st_error("Cursor column not decremented properly\n");
 		return EFI_ST_FAILURE;
 	}
-	ret = con_out->output_string(con_out, L"\b\b");
+	ret = con_out->output_string(con_out, u"\b\b");
 	if (ret != EFI_ST_SUCCESS) {
 		efi_st_error("OutputString failed for backspace\n");
 		return EFI_ST_FAILURE;
@@ -102,7 +102,7 @@ static int execute(void)
 		efi_st_error("Cursor column not decremented properly\n");
 		return EFI_ST_FAILURE;
 	}
-	ret = con_out->output_string(con_out, L"\b\b");
+	ret = con_out->output_string(con_out, u"\b\b");
 	if (ret != EFI_ST_SUCCESS) {
 		efi_st_error("OutputString failed for backspace\n");
 		return EFI_ST_FAILURE;
lib/efi_selftest/efi_selftest_unicode_collation.c +19 -19
index 75294307d9f..c63a1b51e4e 100644
@@ -44,9 +44,9 @@ static int setup(const efi_handle_t handle,
 static int test_stri_coll(void)
 {
 	efi_intn_t ret;
-	u16 c1[] = L"first";
-	u16 c2[] = L"FIRST";
-	u16 c3[] = L"second";
+	u16 c1[] = u"first";
+	u16 c2[] = u"FIRST";
+	u16 c3[] = u"second";
 
 	ret = unicode_collation_protocol->stri_coll(unicode_collation_protocol,
 						    c1, c2);
@@ -78,66 +78,66 @@ static int test_stri_coll(void)
 static int test_metai_match(void)
 {
 	bool ret;
-	const u16 c[] = L"Das U-Boot";
+	const u16 c[] = u"Das U-Boot";
 
 	ret = unicode_collation_protocol->metai_match(
-		unicode_collation_protocol, c, L"*");
+		unicode_collation_protocol, c, u"*");
 	if (!ret) {
 		efi_st_error("metai_match returned %u\n", ret);
 		return EFI_ST_FAILURE;
 	}
 
 	ret = unicode_collation_protocol->metai_match(
-		unicode_collation_protocol, c, L"Da[rstu] U-Boot");
+		unicode_collation_protocol, c, u"Da[rstu] U-Boot");
 	if (!ret) {
 		efi_st_error("metai_match returned %u\n", ret);
 		return EFI_ST_FAILURE;
 	}
 
 	ret = unicode_collation_protocol->metai_match(
-		unicode_collation_protocol, c, L"Da[q-v] U-Boot");
+		unicode_collation_protocol, c, u"Da[q-v] U-Boot");
 	if (!ret) {
 		efi_st_error("metai_match returned %u\n", ret);
 		return EFI_ST_FAILURE;
 	}
 
 	ret = unicode_collation_protocol->metai_match(
-		unicode_collation_protocol, c, L"Da? U-Boot");
+		unicode_collation_protocol, c, u"Da? U-Boot");
 	if (!ret) {
 		efi_st_error("metai_match returned %u\n", ret);
 		return EFI_ST_FAILURE;
 	}
 
 	ret = unicode_collation_protocol->metai_match(
-		unicode_collation_protocol, c, L"D*Bo*t");
+		unicode_collation_protocol, c, u"D*Bo*t");
 	if (!ret) {
 		efi_st_error("metai_match returned %u\n", ret);
 		return EFI_ST_FAILURE;
 	}
 
 	ret = unicode_collation_protocol->metai_match(
-		unicode_collation_protocol, c, L"Da[xyz] U-Boot");
+		unicode_collation_protocol, c, u"Da[xyz] U-Boot");
 	if (ret) {
 		efi_st_error("metai_match returned %u\n", ret);
 		return EFI_ST_FAILURE;
 	}
 
 	ret = unicode_collation_protocol->metai_match(
-		unicode_collation_protocol, c, L"Da[a-d] U-Boot");
+		unicode_collation_protocol, c, u"Da[a-d] U-Boot");
 	if (ret) {
 		efi_st_error("metai_match returned %u\n", ret);
 		return EFI_ST_FAILURE;
 	}
 
 	ret = unicode_collation_protocol->metai_match(
-		unicode_collation_protocol, c, L"Da?? U-Boot");
+		unicode_collation_protocol, c, u"Da?? U-Boot");
 	if (ret) {
 		efi_st_error("metai_match returned %u\n", ret);
 		return EFI_ST_FAILURE;
 	}
 
 	ret = unicode_collation_protocol->metai_match(
-		unicode_collation_protocol, c, L"D*Bo*tt");
+		unicode_collation_protocol, c, u"D*Bo*tt");
 	if (ret) {
 		efi_st_error("metai_match returned %u\n", ret);
 		return EFI_ST_FAILURE;
@@ -148,7 +148,7 @@ static int test_metai_match(void)
 
 static int test_str_lwr(void)
 {
-	u16 c[] = L"U-Boot";
+	u16 c[] = u"U-Boot";
 
 	unicode_collation_protocol->str_lwr(unicode_collation_protocol, c);
 	if (efi_st_strcmp_16_8(c, "u-boot")) {
@@ -161,7 +161,7 @@ static int test_str_lwr(void)
 
 static int test_str_upr(void)
 {
-	u16 c[] = L"U-Boot";
+	u16 c[] = u"U-Boot";
 
 	unicode_collation_protocol->str_upr(unicode_collation_protocol, c);
 	if (efi_st_strcmp_16_8(c, "U-BOOT")) {
@@ -194,16 +194,16 @@ static int test_str_to_fat(void)
 
 	boottime->set_mem(fat, sizeof(fat), 0);
 	ret = unicode_collation_protocol->str_to_fat(unicode_collation_protocol,
-						     L"U -Boo.t", 6, fat);
-	if (ret || efi_st_strcmp_16_8(L"U-BOOT", fat)) {
+						     u"U -Boo.t", 6, fat);
+	if (ret || efi_st_strcmp_16_8(u"U-BOOT", fat)) {
 		efi_st_error("str_to_fat returned %u, \"%s\"\n", ret, fat);
 		return EFI_ST_FAILURE;
 	}
 
 	boottime->set_mem(fat, 16, 0);
 	ret = unicode_collation_protocol->str_to_fat(unicode_collation_protocol,
-						     L"U\\Boot", 6, fat);
-	if (!ret || efi_st_strcmp_16_8(L"U_BOOT", fat)) {
+						     u"U\\Boot", 6, fat);
+	if (!ret || efi_st_strcmp_16_8(u"U_BOOT", fat)) {
 		efi_st_error("str_to_fat returned %u, \"%s\"\n", ret, fat);
 		return EFI_ST_FAILURE;
 	}
lib/efi_selftest/efi_selftest_util.c +53 -53

117 lines not on this page · raw message

lib/efi_selftest/efi_selftest_variables.c +11 -11
index 2c16f3db6cc..dc1d5c8f43e 100644
@@ -63,7 +63,7 @@ static int execute(void)
 		return EFI_ST_FAILURE;
 	}
 	/* Set variable 0 */
-	ret = runtime->set_variable(L"efi_st_var0", &guid_vendor0,
+	ret = runtime->set_variable(u"efi_st_var0", &guid_vendor0,
 				    EFI_VARIABLE_BOOTSERVICE_ACCESS,
 				    3, v + 4);
 	if (ret != EFI_SUCCESS) {
@@ -72,7 +72,7 @@ static int execute(void)
 	}
 	data[3] = 0xff;
 	len = 3;
-	ret = runtime->get_variable(L"efi_st_var0", &guid_vendor0,
+	ret = runtime->get_variable(u"efi_st_var0", &guid_vendor0,
 				    &attr, &len, data);
 	if (ret != EFI_SUCCESS) {
 		efi_st_error("GetVariable failed\n");
@@ -87,7 +87,7 @@ static int execute(void)
 		return EFI_ST_FAILURE;
 	}
 	/* Set variable 1 */
-	ret = runtime->set_variable(L"efi_st_var1", &guid_vendor1,
+	ret = runtime->set_variable(u"efi_st_var1", &guid_vendor1,
 				    EFI_VARIABLE_BOOTSERVICE_ACCESS,
 				    8, v);
 	if (ret != EFI_SUCCESS) {
@@ -95,7 +95,7 @@ static int execute(void)
 		return EFI_ST_FAILURE;
 	}
 	len = EFI_ST_MAX_DATA_SIZE;
-	ret = runtime->get_variable(L"efi_st_var1", &guid_vendor1,
+	ret = runtime->get_variable(u"efi_st_var1", &guid_vendor1,
 				    &attr, &len, data);
 	if (ret != EFI_SUCCESS) {
 		efi_st_error("GetVariable failed\n");
@@ -111,7 +111,7 @@ static int execute(void)
 		return EFI_ST_FAILURE;
 	}
 	/* Append variable 1 */
-	ret = runtime->set_variable(L"efi_st_var1", &guid_vendor1,
+	ret = runtime->set_variable(u"efi_st_var1", &guid_vendor1,
 				    EFI_VARIABLE_BOOTSERVICE_ACCESS |
 				    EFI_VARIABLE_APPEND_WRITE,
 				    7, v + 8);
@@ -120,7 +120,7 @@ static int execute(void)
 		return EFI_ST_FAILURE;
 	}
 	len = EFI_ST_MAX_DATA_SIZE;
-	ret = runtime->get_variable(L"efi_st_var1", &guid_vendor1,
+	ret = runtime->get_variable(u"efi_st_var1", &guid_vendor1,
 				    &attr, &len, data);
 	if (ret != EFI_SUCCESS) {
 		efi_st_error("GetVariable failed\n");
@@ -132,7 +132,7 @@ static int execute(void)
 	if (memcmp(data, v, len))
 		efi_st_todo("GetVariable returned wrong value\n");
 	/* Append variable 2 */
-	ret = runtime->set_variable(L"efi_none", &guid_vendor1,
+	ret = runtime->set_variable(u"efi_none", &guid_vendor1,
 				    EFI_VARIABLE_BOOTSERVICE_ACCESS |
 				    EFI_VARIABLE_APPEND_WRITE,
 				    15, v);
@@ -173,28 +173,28 @@ static int execute(void)
 		return EFI_ST_FAILURE;
 	}
 	/* Delete variable 1 */
-	ret = runtime->set_variable(L"efi_st_var1", &guid_vendor1,
+	ret = runtime->set_variable(u"efi_st_var1", &guid_vendor1,
 				    0, 0, NULL);
 	if (ret != EFI_SUCCESS) {
 		efi_st_error("SetVariable failed\n");
 		return EFI_ST_FAILURE;
 	}
 	len = EFI_ST_MAX_DATA_SIZE;
-	ret = runtime->get_variable(L"efi_st_var1", &guid_vendor1,
+	ret = runtime->get_variable(u"efi_st_var1", &guid_vendor1,
 				    &attr, &len, data);
 	if (ret != EFI_NOT_FOUND) {
 		efi_st_error("Variable was not deleted\n");
 		return EFI_ST_FAILURE;
 	}
 	/* Delete variable 0 */
-	ret = runtime->set_variable(L"efi_st_var0", &guid_vendor0,
+	ret = runtime->set_variable(u"efi_st_var0", &guid_vendor0,
 				    0, 0, NULL);
 	if (ret != EFI_SUCCESS) {
 		efi_st_error("SetVariable failed\n");
 		return EFI_ST_FAILURE;
 	}
 	len = EFI_ST_MAX_DATA_SIZE;
-	ret = runtime->get_variable(L"efi_st_var0", &guid_vendor0,
+	ret = runtime->get_variable(u"efi_st_var0", &guid_vendor0,
 				    &attr, &len, data);
 	if (ret != EFI_NOT_FOUND) {
 		efi_st_error("Variable was not deleted\n");
lib/efi_selftest/efi_selftest_variables_runtime.c +2 -2
index 3226069c0b2..4700d942410 100644
@@ -58,7 +58,7 @@ static int execute(void)
 		return EFI_ST_FAILURE;
 	}
 
-	ret = runtime->set_variable(L"efi_st_var0", &guid_vendor0,
+	ret = runtime->set_variable(u"efi_st_var0", &guid_vendor0,
 				    EFI_VARIABLE_BOOTSERVICE_ACCESS |
 				    EFI_VARIABLE_RUNTIME_ACCESS,
 				    3, v + 4);
@@ -67,7 +67,7 @@ static int execute(void)
 		return EFI_ST_FAILURE;
 	}
 	len = EFI_ST_MAX_DATA_SIZE;
-	ret = runtime->get_variable(L"PlatformLangCodes", &guid_vendor0,
+	ret = runtime->get_variable(u"PlatformLangCodes", &guid_vendor0,
 				    &attr, &len, data);
 	if (ret != EFI_SUCCESS) {
 		efi_st_error("GetVariable failed\n");
lib/efi_selftest/initrddump.c +30 -30

180 lines not on this page · raw message

Signature · 1 line
2.35.0.rc0.227.g00780c9af4-goog
#4 lore raw

Re: [PATCH v5 2/4] efi: Use 16-bit Unicode strings

Quoted 7 lines · Simon Glass

At present we use wide characters for Unicode but this is not necessary. Change the code to use the 'u' literal instead. This helps to fix build warnings for sandbox on the Raspberry Pi.

Applied to u-boot/master, thanks!

Signature · 1 line
Tom
#5 lore raw

PATCH v5 3/4 sandbox: Detect the host bit size automatically

In reply to Simon Glass

At present if you build sandbox on a 32-bit host a lot of errors are produced. This is because CONFIG_HOST_64BIT is enabled by default.

It is quite annoying to have to change that manually before building sandbox. It is also quite confusing for new users.

Add a way to detect the setting and add the appropriate CONFIG_HOST_64BIT=y or CONFIG_HOST_32BIT=y to the defconfig, to avoid this issue.

Tidy up the Kconfig help for the above two options while we are here.

---

(no changes since v4)

Changes in v4:
- Use $(HOSTCC) instead of gcc
- Add proper Kconfig help

Changes in v3:
- Use 'bitness' instead of 'bit'

Changes in v2:
- Drop patches previously applied
- Put all the packages in gcc.rst

 Makefile                 | 11 ++++++++++-
 arch/sandbox/Kconfig     | 33 ++++++++++++++++++++++++++++-----
 scripts/kconfig/Makefile | 14 +++++++++++++-
 3 files changed, 51 insertions(+), 7 deletions(-)
Makefile +10 -1
index b08bad48738..da9b5e494f8 100644
@@ -570,8 +570,17 @@ export KBUILD_DEFCONFIG KBUILD_KCONFIG
 config: scripts_basic outputmakefile FORCE
 	$(Q)$(MAKE) $(build)=scripts/kconfig $@
 
+# If nothing is specified explicitly, detect the bit size for sandbox,
+# referred to from arch/sandbox/Kconfig
+# Add it to the end of the defconfig file
 %config: scripts_basic outputmakefile FORCE
-	$(Q)$(MAKE) $(build)=scripts/kconfig $@
+	$(Q)if test -f $(srctree)/configs/$@ && \
+		! grep -Eq "CONFIG_HOST_(32|64)BIT=y" $(srctree)/configs/$@; then \
+		echo '#include <stdio.h>\nint main(void) { printf("CONFIG_HOST_%dBIT=y\\n", __WORDSIZE); return 0; }' \
+			 | $(HOSTCC) -x c - -o get_word_size; \
+		extra=$$(./get_word_size); \
+	fi; \
+	$(MAKE) $(build)=scripts/kconfig EXTRA_DEFCONFIG=$$extra $@
 
 else
 # ===========================================================================
arch/sandbox/Kconfig +28 -5
index 477c51960da..08d7f3bded6 100644
@@ -35,19 +35,42 @@ config SYS_CONFIG_NAME
 
 choice
 	prompt "Run sandbox on 32/64-bit host"
-	default HOST_64BIT
+	default HOST_DETECT_BITNESS
 	help
-	  Sandbox can be built on 32-bit and 64-bit hosts.
-	  The default is to build on a 64-bit host and run
-	  on a 64-bit host. If you want to run sandbox on
-	  a 32-bit host, change it here.
+	  Sandbox can be built on 32-bit and 64-bit hosts. This is generally
+	  auto-detected but you can force a particular word size here. If you
+	  see strange warnings about SANDBOX_BITS_PER_LONG then you may have
+	  selected the wrong value.
 
 config HOST_32BIT
 	bool "32-bit host"
 	depends on !PHYS_64BIT
+	help
+	  Select this if the host is a 32-bit machine. This adjusts various
+	  tests and other features to work correctly in this environment. If
+	  this option is enabled on 64-bit machines you may get build warnings
+	  and/or errors.
 
 config HOST_64BIT
 	bool "64-bit host"
+	help
+	  Select this if the host is a 64-bit machine. This adjusts various
+	  tests and other features to work correctly in this environment. If
+	  this option is enabled on 32-bit machines you may get build warnings
+	  and/or errors.
+
+config HOST_DETECT_BITNESS
+	bool "Auto-detect host bitness"
+	help
+	  Select this if you want the build system to determine the bitness
+	  automatically. This compiles a small program during the build, then
+	  runs it to determine the bitness using __WORDSIZE (32 or 64 bits).
+	  Then it adds one of the above options (CONFIG_HOST_32 or
+	  CONFIG_HOST_64) to the configuration when creating it.
+
+	  In rare situations this may fail, e.g. on an unsupported Operating
+	  System or toolchain, in which case you will likely get build warnings
+	  and errors.
 
 endchoice
 
scripts/kconfig/Makefile +13 -1
index 12e525ee31f..4e28a7e5973 100644
@@ -12,6 +12,9 @@ PHONY += xconfig gconfig menuconfig config localmodconfig localyesconfig \
 #  Set SRCARCH to .. fake this Makefile.
 SRCARCH := ..
 
+# For U-Boot, EXTRA_DEFCONFIG contains a line to be added to the defconfig
+# before processing. If empty, no line is added.
+
 ifdef KBUILD_KCONFIG
 Kconfig := $(KBUILD_KCONFIG)
 else
@@ -92,8 +95,17 @@ else
 endif
 endif
 
+# If EXTRA_DEFCONFIG is defined, add it to the end of the defconfig, before
+# processing. This allows the caller to change a setting on the fly
 %_defconfig: $(obj)/conf
-	$(Q)$< $(silent) --defconfig=arch/$(SRCARCH)/configs/$@ $(Kconfig)
+	$(Q)defconfig="$(srctree)/arch/$(SRCARCH)/configs/$@"; \
+	if [ -n "$(EXTRA_DEFCONFIG)" ]; then \
+		cat $$defconfig >defconfig_tmp; \
+		echo $(EXTRA_DEFCONFIG) >>defconfig_tmp; \
+		$< $(silent) --defconfig=defconfig_tmp $(Kconfig); \
+	else \
+		$< $(silent) --defconfig=$$defconfig $(Kconfig); \
+	fi
 
 # Added for U-Boot (backward compatibility)
 %_config: %_defconfig
Signature · 1 line
2.35.0.rc0.227.g00780c9af4-goog
#6 lore raw

Re: [PATCH v5 3/4] sandbox: Detect the host bit size automatically

Quoted 6 lines · Simon Glass

At present if you build sandbox on a 32-bit host a lot of errors are produced. This is because CONFIG_HOST_64BIT is enabled by default.

It is quite annoying to have to change that manually before building sandbox. It is also quite confusing for new users.

Quoted 7 lines

Add a way to detect the setting and add the appropriate CONFIG_HOST_64BIT=y or CONFIG_HOST_32BIT=y to the defconfig, to avoid this issue.

Tidy up the Kconfig help for the above two options while we are here.

This pretty reliably fails to build for me with CONFIG_HOST_DETECT_BITNESS=y resulting in CONFIG_SANDBOX_BITS_PER_LONG not being set. It's as easy to trigger as "make O=/tmp/fail sandbox_config all" for me (over on bill-the-cat if it works for you locally).

Signature · 1 line
Tom
#7 lore raw

Re: [PATCH v5 3/4] sandbox: Detect the host bit size automatically

In reply to Simon Glass
Quoted 39 lines · Simon Glass

At present if you build sandbox on a 32-bit host a lot of errors are produced. This is because CONFIG_HOST_64BIT is enabled by default.

It is quite annoying to have to change that manually before building sandbox. It is also quite confusing for new users.

Add a way to detect the setting and add the appropriate CONFIG_HOST_64BIT=y or CONFIG_HOST_32BIT=y to the defconfig, to avoid this issue.

Tidy up the Kconfig help for the above two options while we are here.

---

(no changes since v4)

Changes in v4:
- Use $(HOSTCC) instead of gcc
- Add proper Kconfig help

Changes in v3:
- Use 'bitness' instead of 'bit'

Changes in v2:
- Drop patches previously applied
- Put all the packages in gcc.rst

  Makefile                 | 11 ++++++++++-
  arch/sandbox/Kconfig     | 33 ++++++++++++++++++++++++++++-----
  scripts/kconfig/Makefile | 14 +++++++++++++-
  3 files changed, 51 insertions(+), 7 deletions(-)
Makefile +0 -0
index b08bad48738..da9b5e494f8 100644
@@ -570,8 +570,17 @@ export KBUILD_DEFCONFIG KBUILD_KCONFIG
  config: scripts_basic outputmakefile FORCE

Makefile export KBUILD_DEFCONFIG KBUILD_KCONFIG · line 579

Quoted 10 lines
Makefile +6 -1
  	$(Q)$(MAKE) $(build)=scripts/kconfig $@
 
+# If nothing is specified explicitly, detect the bit size for sandbox,
+# referred to from arch/sandbox/Kconfig
+# Add it to the end of the defconfig file
  %config: scripts_basic outputmakefile FORCE
-	$(Q)$(MAKE) $(build)=scripts/kconfig $@
+	$(Q)if test -f $(srctree)/configs/$@ && \
+		! grep -Eq "CONFIG_HOST_(32|64)BIT=y" $(srctree)/configs/$@; then \
+		echo '#include <stdio.h>\nint main(void) { printf("CONFIG_HOST_%dBIT=y\\n", __WORDSIZE); return 0; }' \

This does not compile on Alpine Linux:

test.c: In function 'main':
test.c:2:50: error: '__WORDSIZE' undeclared (first use in this function)

    2 | int main(void) { printf("CONFIG_HOST_%dBIT=y\n", __WORDSIZE);

return 0; }

Quoted 25 lines
Makefile +4 -0
+			 | $(HOSTCC) -x c - -o get_word_size; \
+		extra=$$(./get_word_size); \
+	fi; \
+	$(MAKE) $(build)=scripts/kconfig EXTRA_DEFCONFIG=$$extra $@
 
  else
  # ===========================================================================
arch/sandbox/Kconfig +4 -5
index 477c51960da..08d7f3bded6 100644
@@ -35,19 +35,42 @@ config SYS_CONFIG_NAME
 
  choice
  	prompt "Run sandbox on 32/64-bit host"
-	default HOST_64BIT
+	default HOST_DETECT_BITNESS
  	help
-	  Sandbox can be built on 32-bit and 64-bit hosts.
-	  The default is to build on a 64-bit host and run
-	  on a 64-bit host. If you want to run sandbox on
-	  a 32-bit host, change it here.
+	  Sandbox can be built on 32-bit and 64-bit hosts. This is generally
+	  auto-detected but you can force a particular word size here. If you
+	  see strange warnings about SANDBOX_BITS_PER_LONG then you may have

arch/sandbox/Kconfig config SYS_CONFIG_NAME · line 52

Quoted 10 lines
arch/sandbox/Kconfig +3 -0
 
 
 
+	  selected the wrong value.
 
  config HOST_32BIT
  	bool "32-bit host"
  	depends on !PHYS_64BIT
+	help
+	  Select this if the host is a 32-bit machine. This adjusts various

This text is really confusing me.

Does HOST_32BIT relate to the bitness of HOSTCC that we use to compile tools? I would not know why I should have to set HOSTCC manually.

The bitness of the binary that we build is orthogonal to the bitness of the system that we are building on.

You can build a 64bit ARM binary on a 32bit machine and vice versa.

An i386 binary can be run on a x86_64 host. Same with ARMv7 on an ARMv8 host.

Normally I would call the machine I am building on host. But that does not imply the bitness of the target machine nor does it imply the bitness of the binary.

What does your usage of HOST relate to?

Best regards

Heinrich

Quoted 60 lines
arch/sandbox/Kconfig +21 -0
+	  tests and other features to work correctly in this environment. If
+	  this option is enabled on 64-bit machines you may get build warnings
+	  and/or errors.
 
  config HOST_64BIT
  	bool "64-bit host"
+	help
+	  Select this if the host is a 64-bit machine. This adjusts various
+	  tests and other features to work correctly in this environment. If
+	  this option is enabled on 32-bit machines you may get build warnings
+	  and/or errors.
+
+config HOST_DETECT_BITNESS
+	bool "Auto-detect host bitness"
+	help
+	  Select this if you want the build system to determine the bitness
+	  automatically. This compiles a small program during the build, then
+	  runs it to determine the bitness using __WORDSIZE (32 or 64 bits).
+	  Then it adds one of the above options (CONFIG_HOST_32 or
+	  CONFIG_HOST_64) to the configuration when creating it.
+
+	  In rare situations this may fail, e.g. on an unsupported Operating
+	  System or toolchain, in which case you will likely get build warnings
+	  and errors.

endchoice

scripts/kconfig/Makefile +13 -1
index 12e525ee31f..4e28a7e5973 100644
@@ -12,6 +12,9 @@ PHONY += xconfig gconfig menuconfig config localmodconfig localyesconfig \
  #  Set SRCARCH to .. fake this Makefile.
  SRCARCH := ..
 
+# For U-Boot, EXTRA_DEFCONFIG contains a line to be added to the defconfig
+# before processing. If empty, no line is added.
+
  ifdef KBUILD_KCONFIG
  Kconfig := $(KBUILD_KCONFIG)
  else
@@ -92,8 +95,17 @@ else
  endif
  endif
 
+# If EXTRA_DEFCONFIG is defined, add it to the end of the defconfig, before
+# processing. This allows the caller to change a setting on the fly
  %_defconfig: $(obj)/conf
-	$(Q)$< $(silent) --defconfig=arch/$(SRCARCH)/configs/$@ $(Kconfig)
+	$(Q)defconfig="$(srctree)/arch/$(SRCARCH)/configs/$@"; \
+	if [ -n "$(EXTRA_DEFCONFIG)" ]; then \
+		cat $$defconfig >defconfig_tmp; \
+		echo $(EXTRA_DEFCONFIG) >>defconfig_tmp; \
+		$< $(silent) --defconfig=defconfig_tmp $(Kconfig); \
+	else \
+		$< $(silent) --defconfig=$$defconfig $(Kconfig); \
+	fi
 
  # Added for U-Boot (backward compatibility)
  %_config: %_defconfig
#8 lore raw

PATCH v5 4/4 treewide: Use 16-bit unicode strings

In reply to Simon Glass

At present we use wide characters for unicode but this is not necessary. Change the code to use the 'u' literal instead. This helps to fix build warnings for sandbox on rpi.

Note: This applies tree-wide

---

(no changes since v3)

Changes in v3:
- Add a new patch to change non-EFI occurences

 lib/lzma/Types.h  |  4 ++--
 lib/vsprintf.c    |  2 +-
 test/print_ut.c   |  2 +-
 test/unicode_ut.c | 22 +++++++++++-----------
 4 files changed, 15 insertions(+), 15 deletions(-)
lib/lzma/Types.h +2 -2
index 8afcba556eb..04f894a8ca9 100644
@@ -225,9 +225,9 @@ typedef struct
 #else
 
 #define CHAR_PATH_SEPARATOR '/'
-#define WCHAR_PATH_SEPARATOR L'/'
+#define WCHAR_PATH_SEPARATOR u'/'
 #define STRING_PATH_SEPARATOR "/"
-#define WSTRING_PATH_SEPARATOR L"/"
+#define WSTRING_PATH_SEPARATOR u"/"
 
 #endif
 
lib/vsprintf.c +1 -1
index 2c84649fa8a..69b2f6a1adc 100644
@@ -279,7 +279,7 @@ static char *string(char *buf, char *end, const char *s, int field_width,
 static __maybe_unused char *string16(char *buf, char *end, u16 *s,
 				     int field_width, int precision, int flags)
 {
-	const u16 *str = s ? s : L"<NULL>";
+	const u16 *str = s ? s : u"<NULL>";
 	ssize_t i, len = utf16_strnlen(str, precision);
 
 	if (!(flags & LEFT))
test/print_ut.c +1 -1
index 194387f169f..a133907674d 100644
@@ -118,7 +118,7 @@ static int print_printf(struct unit_test_state *uts)
 	snprintf(str, 0, "testing none");
 	ut_asserteq('x', *str);
 
-	sprintf(big_str, "_%ls_", L"foo");
+	sprintf(big_str, "_%ls_", u"foo");
 	ut_assertok(strcmp("_foo_", big_str));
 
 	/* Test the banner function */
test/unicode_ut.c +11 -11
index 617eed8cfa0..f821e5a6be8 100644
@@ -299,17 +299,17 @@ static int unicode_test_utf8_utf16_strcpy(struct unit_test_state *uts)
 	pos = buf;
 	utf8_utf16_strcpy(&pos, j1);
 	ut_asserteq(4, pos - buf);
-	ut_assert(!unicode_test_u16_strcmp(buf, L"j1?l", SIZE_MAX));
+	ut_assert(!unicode_test_u16_strcmp(buf, u"j1?l", SIZE_MAX));
 
 	pos = buf;
 	utf8_utf16_strcpy(&pos, j2);
 	ut_asserteq(4, pos - buf);
-	ut_assert(!unicode_test_u16_strcmp(buf, L"j2?l", SIZE_MAX));
+	ut_assert(!unicode_test_u16_strcmp(buf, u"j2?l", SIZE_MAX));
 
 	pos = buf;
 	utf8_utf16_strcpy(&pos, j3);
 	ut_asserteq(3, pos - buf);
-	ut_assert(!unicode_test_u16_strcmp(buf, L"j3?", SIZE_MAX));
+	ut_assert(!unicode_test_u16_strcmp(buf, u"j3?", SIZE_MAX));
 
 	return 0;
 }
@@ -584,13 +584,13 @@ UNICODE_TEST(unicode_test_utf_to_upper);
 
 static int unicode_test_u16_strncmp(struct unit_test_state *uts)
 {
-	ut_assert(u16_strncmp(L"abc", L"abc", 3) == 0);
-	ut_assert(u16_strncmp(L"abcdef", L"abcghi", 3) == 0);
-	ut_assert(u16_strncmp(L"abcdef", L"abcghi", 6) < 0);
-	ut_assert(u16_strncmp(L"abcghi", L"abcdef", 6) > 0);
-	ut_assert(u16_strcmp(L"abc", L"abc") == 0);
-	ut_assert(u16_strcmp(L"abcdef", L"deghi") < 0);
-	ut_assert(u16_strcmp(L"deghi", L"abcdef") > 0);
+	ut_assert(u16_strncmp(u"abc", u"abc", 3) == 0);
+	ut_assert(u16_strncmp(u"abcdef", u"abcghi", 3) == 0);
+	ut_assert(u16_strncmp(u"abcdef", u"abcghi", 6) < 0);
+	ut_assert(u16_strncmp(u"abcghi", u"abcdef", 6) > 0);
+	ut_assert(u16_strcmp(u"abc", u"abc") == 0);
+	ut_assert(u16_strcmp(u"abcdef", u"deghi") < 0);
+	ut_assert(u16_strcmp(u"deghi", u"abcdef") > 0);
 	return 0;
 }
 UNICODE_TEST(unicode_test_u16_strncmp);
@@ -713,7 +713,7 @@ UNICODE_TEST(unicode_test_utf8_to_utf32_stream);
 static int unicode_test_efi_create_indexed_name(struct unit_test_state *uts)
 {
 	u16 buf[16];
-	u16 const expected[] = L"Capsule0AF9";
+	u16 const expected[] = u"Capsule0AF9";
 	u16 *pos;
 
 	memset(buf, 0xeb, sizeof(buf));
Signature · 1 line
2.35.0.rc0.227.g00780c9af4-goog
Reviewed-by on v5 4/4
#9 lore raw

Re: [PATCH v5 4/4] treewide: Use 16-bit unicode strings

Quoted 1 line · Simon Glass

At present we use wide characters for unicode but this is not necessary.

nits:
%s/unicode/Unicode/

Quoted 2 lines

Change the code to use the 'u' literal instead. This helps to fix build warnings for sandbox on rpi.

%s/rpi/the Raspberry Pi/

Quoted 2 lines

Note: This applies tree-wide

Why do we need this in the commit message? You patch changes lib/ and test/ only.

Quoted 2 lines

Otherwise

Quoted 110 lines

---

(no changes since v3)

Changes in v3:
- Add a new patch to change non-EFI occurences

  lib/lzma/Types.h  |  4 ++--
  lib/vsprintf.c    |  2 +-
  test/print_ut.c   |  2 +-
  test/unicode_ut.c | 22 +++++++++++-----------
  4 files changed, 15 insertions(+), 15 deletions(-)
lib/lzma/Types.h +2 -2
index 8afcba556eb..04f894a8ca9 100644
@@ -225,9 +225,9 @@ typedef struct
  #else
 
  #define CHAR_PATH_SEPARATOR '/'
-#define WCHAR_PATH_SEPARATOR L'/'
+#define WCHAR_PATH_SEPARATOR u'/'
  #define STRING_PATH_SEPARATOR "/"
-#define WSTRING_PATH_SEPARATOR L"/"
+#define WSTRING_PATH_SEPARATOR u"/"
 
  #endif
 
lib/vsprintf.c +1 -1
index 2c84649fa8a..69b2f6a1adc 100644
@@ -279,7 +279,7 @@ static char *string(char *buf, char *end, const char *s, int field_width,
  static __maybe_unused char *string16(char *buf, char *end, u16 *s,
  				     int field_width, int precision, int flags)
  {
-	const u16 *str = s ? s : L"<NULL>";
+	const u16 *str = s ? s : u"<NULL>";
  	ssize_t i, len = utf16_strnlen(str, precision);
 
  	if (!(flags & LEFT))
test/print_ut.c +1 -1
index 194387f169f..a133907674d 100644
@@ -118,7 +118,7 @@ static int print_printf(struct unit_test_state *uts)
  	snprintf(str, 0, "testing none");
  	ut_asserteq('x', *str);
 
-	sprintf(big_str, "_%ls_", L"foo");
+	sprintf(big_str, "_%ls_", u"foo");
  	ut_assertok(strcmp("_foo_", big_str));
 
  	/* Test the banner function */
test/unicode_ut.c +11 -11
index 617eed8cfa0..f821e5a6be8 100644
@@ -299,17 +299,17 @@ static int unicode_test_utf8_utf16_strcpy(struct unit_test_state *uts)
  	pos = buf;
  	utf8_utf16_strcpy(&pos, j1);
  	ut_asserteq(4, pos - buf);
-	ut_assert(!unicode_test_u16_strcmp(buf, L"j1?l", SIZE_MAX));
+	ut_assert(!unicode_test_u16_strcmp(buf, u"j1?l", SIZE_MAX));
 
  	pos = buf;
  	utf8_utf16_strcpy(&pos, j2);
  	ut_asserteq(4, pos - buf);
-	ut_assert(!unicode_test_u16_strcmp(buf, L"j2?l", SIZE_MAX));
+	ut_assert(!unicode_test_u16_strcmp(buf, u"j2?l", SIZE_MAX));
 
  	pos = buf;
  	utf8_utf16_strcpy(&pos, j3);
  	ut_asserteq(3, pos - buf);
-	ut_assert(!unicode_test_u16_strcmp(buf, L"j3?", SIZE_MAX));
+	ut_assert(!unicode_test_u16_strcmp(buf, u"j3?", SIZE_MAX));
 
  	return 0;
  }
@@ -584,13 +584,13 @@ UNICODE_TEST(unicode_test_utf_to_upper);
 
  static int unicode_test_u16_strncmp(struct unit_test_state *uts)
  {
-	ut_assert(u16_strncmp(L"abc", L"abc", 3) == 0);
-	ut_assert(u16_strncmp(L"abcdef", L"abcghi", 3) == 0);
-	ut_assert(u16_strncmp(L"abcdef", L"abcghi", 6) < 0);
-	ut_assert(u16_strncmp(L"abcghi", L"abcdef", 6) > 0);
-	ut_assert(u16_strcmp(L"abc", L"abc") == 0);
-	ut_assert(u16_strcmp(L"abcdef", L"deghi") < 0);
-	ut_assert(u16_strcmp(L"deghi", L"abcdef") > 0);
+	ut_assert(u16_strncmp(u"abc", u"abc", 3) == 0);
+	ut_assert(u16_strncmp(u"abcdef", u"abcghi", 3) == 0);
+	ut_assert(u16_strncmp(u"abcdef", u"abcghi", 6) < 0);
+	ut_assert(u16_strncmp(u"abcghi", u"abcdef", 6) > 0);
+	ut_assert(u16_strcmp(u"abc", u"abc") == 0);
+	ut_assert(u16_strcmp(u"abcdef", u"deghi") < 0);
+	ut_assert(u16_strcmp(u"deghi", u"abcdef") > 0);
  	return 0;
  }
  UNICODE_TEST(unicode_test_u16_strncmp);
@@ -713,7 +713,7 @@ UNICODE_TEST(unicode_test_utf8_to_utf32_stream);
  static int unicode_test_efi_create_indexed_name(struct unit_test_state *uts)
  {
  	u16 buf[16];
-	u16 const expected[] = L"Capsule0AF9";
+	u16 const expected[] = u"Capsule0AF9";
  	u16 *pos;
 
  	memset(buf, 0xeb, sizeof(buf));
#10 lore raw

Re: [PATCH v5 4/4] treewide: Use 16-bit unicode strings

In reply to Simon Glass
Quoted 7 lines · Simon Glass

At present we use wide characters for unicode but this is not necessary. Change the code to use the 'u' literal instead. This helps to fix build warnings for sandbox on rpi.

Note: This applies tree-wide

Applied to u-boot/master, thanks!

Signature · 1 line
Tom