Skip to contentSkip to conversation

Nokia RX-51: Update documentation about ext2/3/4

PATCH RESEND In review Pali Rohár 2 participants 7 messages Jan 24, 2022 – Jan 27, 2022

lore
Share & tools
lore
#0 lore raw

PATCH RESEND 1/3 Nokia RX-51: Update documentation about ext2/3/4

Since commit 25c5b6517854 ("Nokia RX-51: Do not try calling both ext2load and ext4load") command ext4load is used for all ext2/3/4 fs variants.

---
 doc/README.nokia_rx51 | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
doc/README.nokia_rx51 +2 -3
index 7f22ed49bd75..1be077514f03 100644
@@ -44,8 +44,7 @@ Boot from SD or eMMC in this order:
    * 1.2 find uImage on first fat partition
    * 1.3 find zImage on first fat partition
    * 1.4 same order for 2. - 4. fat partition
- * 2. same as 1. but for ext2/3 partition
- * 3. same as 1. but for ext4 partition
+ * 2. same as 1. but for ext2/3/4 partition
 
 
 Available additional commands/variables:
@@ -70,7 +69,7 @@ Additional variables for loading files from mmc:
 
  * mmc ${mmcnum} (0 - external, 1 - internal)
  * partition number ${mmcpart} (1 - 4)
- * parition type ${mmctype} (fat, ext2, ext4)
+ * partition type ${mmctype} (fat, ext2, ext4; ext2 is just alias for ext4)
 
 Additional variables for booting kernel:
 
Signature · 1 line
2.20.1
#1 lore raw

PATCH RESEND 2/3 Nokia RX-51: Update documentation about flashing

This change contains update for doc/README.nokia_rx51 documentation file with information how to load U-Boot image to device RAM without need to flash it and also how to flash it into OneNAND via 0xFFFF flasher.

---
 doc/README.nokia_rx51 | 45 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)
doc/README.nokia_rx51 +45 -0
index 1be077514f03..e739b02088ea 100644
@@ -22,6 +22,51 @@ following repository:
 
   https://github.com/pali/u-boot-maemo
 
+To generate combined.bin image from u-boot.bin and kernel.bin (either uImage
+or zImage) use:
+
+  sh u-boot-gen-combined u-boot.bin kernel.bin combined.bin
+
+Original Maemo Fremantle PR1.3 zImage kernel binary is available at:
+
+  http://repository.maemo.org/pool/maemo5.0/free/k/kernel/kernel_2.6.28-20103103+0m5_armel.deb
+
+To unpack it (from DEB/AR, TAR and FIASCO) call commands:
+
+  ar x kernel_2.6.28-20103103+0m5_armel.deb data.tar.gz
+  tar -O -xf data.tar.gz ./boot/zImage-2.6.28-20103103+0m5.fiasco > kernel_2.6.28-20103103+0m5.fiasco
+  0xFFFF -M kernel_2.6.28-20103103+0m5.fiasco -u
+
+Flashed image must start with 2 kB "NOLO!img" header which contains size of
+the image. Header consist of bytes "NOLO!img\x02\x00\x00\x00\x00\x00\x00\x00"
+followed by 4 byte little endian size of the image and rest of the 2 kB header
+are just zero bytes.
+
+Nokia proprietary flasher and also open source 0xFFFF flasher automatically
+prepend required "NOLO!img" header and both applications expect that image
+does not contain "NOLO!img" header. Adding "NOLO!img" header is required
+only in case using "nandwrite" tool for flashing.
+
+Open source 0xFFFF flasher is available in following repository:
+
+  https://github.com/pali/0xFFFF
+
+It is possible to load u-boot.bin via USB to N900 RAM and boot it without
+need to flashing it. Via 0xFFFF running at host PC it is done:
+
+  0xFFFF -m u-boot.bin -l -b
+
+0xFFFF support also flashing kernel image either via USB or directly on
+N900 device. Flashing u-boot/kernel/combined image is done as:
+
+  0xFFFF -m combined.bin -f
+
+Via 0xFFFF is possible to generate also standard flashable image in Nokia
+FIASCO format which contains metadata information like device identification
+(RX-51) and version string (v2021.04):
+
+  0xFFFF -m RX-51:v2021.04:kernel:u-boot.bin -g u-boot.fiasco
+
 There is support for hardware watchdog. Hardware watchdog is started by
 NOLO so u-boot must kick watchdog to prevent reboot device (but not very
 often, max every 2 seconds). There is also support for framebuffer display
Signature · 1 line
2.20.1
#3 lore raw

PATCH RESEND 3/3 Nokia RX-51: Convert documentation to rst format

In reply to Pali Rohár

Convert documentation to rst format

---
 board/nokia/rx51/MAINTAINERS                  |   2 +-
 doc/board/index.rst                           |   1 +
 doc/board/nokia/index.rst                     |   9 ++
 .../nokia/rx51.rst}                           | 144 +++++++++---------
 4 files changed, 87 insertions(+), 69 deletions(-)
 create mode 100644 doc/board/nokia/index.rst
 rename doc/{README.nokia_rx51 => board/nokia/rx51.rst} (32%)
board/nokia/rx51/MAINTAINERS +1 -1
index 58b16bf9a95c..25f8b3c5a9ad 100644
@@ -4,5 +4,5 @@ S:	Maintained
 F:	board/nokia/rx51/
 F:	include/configs/nokia_rx51.h
 F:	configs/nokia_rx51_defconfig
-F:	doc/README.nokia_rx51
+F:	doc/board/nokia/rx51.rst
 F:	test/nokia_rx51_test.sh
doc/board/index.rst +1 -0
index 5607e1f94638..75c34c4a9998 100644
@@ -22,6 +22,7 @@ Board-specific doc
    intel/index
    kontron/index
    microchip/index
+   nokia/index
    nxp/index
    openpiton/index
    qualcomm/index
doc/board/nokia/index.rst new file +9 -0
new file mode 100644
index 000000000000..b68c3c613164
@@ -0,0 +1,9 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Nokia
+=====
+
+.. toctree::
+   :maxdepth: 2
+
+   rx51
doc/board/nokia/rx51.rst renamed from doc/README.nokia_rx51 +76 -68

208 lines not on this page · raw message

Signature · 1 line
2.20.1
Reviewed-by on v1 1/3
#6 lore raw
In reply to Pali Rohár
Quoted 4 lines · Pali Rohár

Since commit 25c5b6517854 ("Nokia RX-51: Do not try calling both ext2load and ext4load") command ext4load is used for all ext2/3/4 fs variants.

Quoted 27 lines
---
  doc/README.nokia_rx51 | 5 ++---
  1 file changed, 2 insertions(+), 3 deletions(-)
doc/README.nokia_rx51 +2 -3
index 7f22ed49bd75..1be077514f03 100644
@@ -44,8 +44,7 @@ Boot from SD or eMMC in this order:
     * 1.2 find uImage on first fat partition
     * 1.3 find zImage on first fat partition
     * 1.4 same order for 2. - 4. fat partition
- * 2. same as 1. but for ext2/3 partition
- * 3. same as 1. but for ext4 partition
+ * 2. same as 1. but for ext2/3/4 partition
 
 
  Available additional commands/variables:
@@ -70,7 +69,7 @@ Additional variables for loading files from mmc:
 
   * mmc ${mmcnum} (0 - external, 1 - internal)
   * partition number ${mmcpart} (1 - 4)
- * parition type ${mmctype} (fat, ext2, ext4)
+ * partition type ${mmctype} (fat, ext2, ext4; ext2 is just alias for ext4)
 
  Additional variables for booting kernel:
 
#2 lore raw

Re: [RESEND PATCH 2/3] Nokia RX-51: Update documentation about flashing

In reply to Pali Rohár
Quoted 14 lines · Pali Rohár

This change contains update for doc/README.nokia_rx51 documentation file with information how to load U-Boot image to device RAM without need to flash it and also how to flash it into OneNAND via 0xFFFF flasher.

---
  doc/README.nokia_rx51 | 45 +++++++++++++++++++++++++++++++++++++++++++
  1 file changed, 45 insertions(+)
doc/README.nokia_rx51 +0 -0
index 1be077514f03..e739b02088ea 100644

doc/README.nokia_rx51 following repository: · line 26

Quoted 5 lines
doc/README.nokia_rx51 +2 -0
@@ -22,6 +22,51 @@ following repository:
 
    https://github.com/pali/u-boot-maemo
 
+To generate combined.bin image from u-boot.bin and kernel.bin (either uImage
+or zImage) use:

Thank you for adding all this information.

In the restructured text (patch 3), please use:

.. code-block:: bash

doc/README.nokia_rx51 following repository: · line 34

Quoted 8 lines
doc/README.nokia_rx51 +8 -0
+
+  sh u-boot-gen-combined u-boot.bin kernel.bin combined.bin
+
+Original Maemo Fremantle PR1.3 zImage kernel binary is available at:
+
+  http://repository.maemo.org/pool/maemo5.0/free/k/kernel/kernel_2.6.28-20103103+0m5_armel.deb
+
+To unpack it (from DEB/AR, TAR and FIASCO) call commands:

.. code-block:: bash

doc/README.nokia_rx51 following repository: · line 40

Quoted 6 lines
doc/README.nokia_rx51 +6 -0
+
+  ar x kernel_2.6.28-20103103+0m5_armel.deb data.tar.gz
+  tar -O -xf data.tar.gz ./boot/zImage-2.6.28-20103103+0m5.fiasco > kernel_2.6.28-20103103+0m5.fiasco
+  0xFFFF -M kernel_2.6.28-20103103+0m5.fiasco -u
+
+Flashed image must start with 2 kB "NOLO!img" header which contains size of

%s/Flashed/The flashed/

%s/size/the size/

doc/README.nokia_rx51 following repository: · line 41

Quoted 1 line
doc/README.nokia_rx51 +1 -0
+the image. Header consist of bytes "NOLO!img\x02\x00\x00\x00\x00\x00\x00\x00"

%/Header consist/The header consists/

doc/README.nokia_rx51 following repository: · line 42

Quoted 1 line
doc/README.nokia_rx51 +1 -0
+followed by 4 byte little endian size of the image and rest of the 2 kB header

%s/4 byte/by the 4 byte/

%s/rest/the rest/

%s/kB/KiB/

doc/README.nokia_rx51 following repository: · line 45

Quoted 3 lines
doc/README.nokia_rx51 +3 -0
+are just zero bytes.
+
+Nokia proprietary flasher and also open source 0xFFFF flasher automatically

%s/Nokia/Nokia's/ ?

doc/README.nokia_rx51 following repository: · line 46

Quoted 1 line
doc/README.nokia_rx51 +1 -0
+prepend required "NOLO!img" header and both applications expect that image

%s/prepend required/prepends the required/

%s/that image/that the image/

doc/README.nokia_rx51 following repository: · line 47

Quoted 1 line
doc/README.nokia_rx51 +1 -0
+does not contain "NOLO!img" header. Adding "NOLO!img" header is required

%s/contain/contain a/

%s/Adding/Adding a/

doc/README.nokia_rx51 following repository: · line 48

Quoted 1 line
doc/README.nokia_rx51 +1 -0
+only in case using "nandwrite" tool for flashing.

%s/using/of using the/

doc/README.nokia_rx51 following repository: · line 50

Quoted 2 lines
doc/README.nokia_rx51 +2 -0
+
+Open source 0xFFFF flasher is available in following repository:

%s/Open/The open/

%s/following/the following/

doc/README.nokia_rx51 following repository: · line 59

Quoted 9 lines
doc/README.nokia_rx51 +9 -0
+
+  https://github.com/pali/0xFFFF
+
+It is possible to load u-boot.bin via USB to N900 RAM and boot it without
+need to flashing it. Via 0xFFFF running at host PC it is done:
+
+  0xFFFF -m u-boot.bin -l -b
+
+0xFFFF support also flashing kernel image either via USB or directly on

%s/support/supports/

doc/README.nokia_rx51 following repository: · line 64

Quoted 5 lines
doc/README.nokia_rx51 +5 -0
+N900 device. Flashing u-boot/kernel/combined image is done as:
+
+  0xFFFF -m combined.bin -f
+
+Via 0xFFFF is possible to generate also standard flashable image in Nokia

%s/is/it is/

%s/standard/a standard/

doc/README.nokia_rx51 following repository: · line 65

Quoted 1 line
doc/README.nokia_rx51 +1 -0
+FIASCO format which contains metadata information like device identification

%s/identification/the identification/

doc/README.nokia_rx51 following repository: · line 66

Quoted 1 line
doc/README.nokia_rx51 +1 -0
+(RX-51) and version string (v2021.04):

%s/and/and the/

Best regards

Heinrich

Quoted 6 lines
doc/README.nokia_rx51 +3 -0
+
+  0xFFFF -m RX-51:v2021.04:kernel:u-boot.bin -g u-boot.fiasco
+
  There is support for hardware watchdog. Hardware watchdog is started by
  NOLO so u-boot must kick watchdog to prevent reboot device (but not very
  often, max every 2 seconds). There is also support for framebuffer display
Acked-by on v1 3/3
#4 lore raw

Re: [RESEND PATCH 3/3] Nokia RX-51: Convert documentation to rst format

In reply to Pali Rohár
Quoted 3 lines · Pali Rohár

Convert documentation to rst format

Thanks for converting to rst.

I guess I will simply add all 3 patches to my repo and add all typo fixes to patch 3.

Quoted 265 lines
---
  board/nokia/rx51/MAINTAINERS                  |   2 +-
  doc/board/index.rst                           |   1 +
  doc/board/nokia/index.rst                     |   9 ++
  .../nokia/rx51.rst}                           | 144 +++++++++---------
  4 files changed, 87 insertions(+), 69 deletions(-)

create mode 100644 doc/board/nokia/index.rst rename doc/{README.nokia_rx51 => board/nokia/rx51.rst} (32%)

board/nokia/rx51/MAINTAINERS +1 -1
index 58b16bf9a95c..25f8b3c5a9ad 100644
@@ -4,5 +4,5 @@ S:	Maintained
  F:	board/nokia/rx51/
  F:	include/configs/nokia_rx51.h
  F:	configs/nokia_rx51_defconfig
-F:	doc/README.nokia_rx51
+F:	doc/board/nokia/rx51.rst
  F:	test/nokia_rx51_test.sh
doc/board/index.rst +1 -0
index 5607e1f94638..75c34c4a9998 100644
@@ -22,6 +22,7 @@ Board-specific doc
     intel/index
     kontron/index
     microchip/index
+   nokia/index
     nxp/index
     openpiton/index
     qualcomm/index
doc/board/nokia/index.rst new file +9 -0
new file mode 100644
index 000000000000..b68c3c613164
@@ -0,0 +1,9 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+Nokia
+=====
+
+.. toctree::
+   :maxdepth: 2
+
+   rx51
doc/board/nokia/rx51.rst renamed from doc/README.nokia_rx51 +76 -68
similarity index 32%
rename from doc/README.nokia_rx51
rename to doc/board/nokia/rx51.rst
index e739b02088ea..7ab3a1686b1d 100644
@@ -1,6 +1,9 @@
-Board: Nokia RX-51 aka N900
+.. SPDX-License-Identifier: GPL-2.0+
 
-This board definition results in a u-boot.bin which can be chainloaded
+Nokia RX-51 aka N900
+====================
+
+This board definition results in a ``u-boot.bin`` which can be chainloaded
  from NOLO in qemu or on a real N900. It does very little hardware config
  because NOLO has already configured the board. Only needed is enabling
  internal eMMC memory via twl4030 regulator which is not enabled by NOLO.
@@ -8,64 +11,64 @@ internal eMMC memory via twl4030 regulator which is not enabled by NOLO.
  NOLO is expecting a kernel image and will treat any image it finds in
  onenand as such. This u-boot is intended to be flashed to the N900 like
  a kernel. In order to transparently boot the original kernel, it will be
-appended to u-boot.bin at 0x40000. NOLO will load the entire image into
+appended to ``u-boot.bin`` at 0x40000. NOLO will load the entire image into
  (random) memory and execute u-boot, which saves hw revision, boot reason
  and boot mode ATAGs set by NOLO. Then the bootscripts will attempt to load
-uImage, zImage or boot.scr from a fat or ext2/3/4 filesystem on external
-SD card or internal eMMC memory. If this fails or keyboard is closed then
-the appended kernel image will be booted using some generated and some
-stored ATAGs (see boot order).
+``uImage``, ``zImage`` or ``boot.scr`` file from a fat or ext2/3/4 filesystem
+on external SD card or internal eMMC memory. If this fails or keyboard is
+closed then the appended kernel image will be booted using some generated
+and some stored ATAGs (see boot order).
 
  For generating combined image of u-boot and kernel (either in uImage or zImage
-format) there is a simple script called u-boot-gen-combined. It is available in
-following repository:
+format) there is a simple script called ``u-boot-gen-combined``. It is available
+in following repository:
 
-  https://github.com/pali/u-boot-maemo
+ https://github.com/pali/u-boot-maemo
 
-To generate combined.bin image from u-boot.bin and kernel.bin (either uImage
-or zImage) use:
+To generate ``combined.bin`` image from ``u-boot.bin`` and ``kernel.bin``
+(either uImage or zImage format) use::
 
-  sh u-boot-gen-combined u-boot.bin kernel.bin combined.bin
+ $ sh u-boot-gen-combined u-boot.bin kernel.bin combined.bin
 
  Original Maemo Fremantle PR1.3 zImage kernel binary is available at:
 
-  http://repository.maemo.org/pool/maemo5.0/free/k/kernel/kernel_2.6.28-20103103+0m5_armel.deb
+ http://repository.maemo.org/pool/maemo5.0/free/k/kernel/kernel_2.6.28-20103103+0m5_armel.deb
 
-To unpack it (from DEB/AR, TAR and FIASCO) call commands:
+To unpack it (from DEB/AR, TAR and FIASCO) call commands::
 
-  ar x kernel_2.6.28-20103103+0m5_armel.deb data.tar.gz
-  tar -O -xf data.tar.gz ./boot/zImage-2.6.28-20103103+0m5.fiasco > kernel_2.6.28-20103103+0m5.fiasco
-  0xFFFF -M kernel_2.6.28-20103103+0m5.fiasco -u
+ $ ar x kernel_2.6.28-20103103+0m5_armel.deb data.tar.gz
+ $ tar -O -xf data.tar.gz ./boot/zImage-2.6.28-20103103+0m5.fiasco > kernel_2.6.28-20103103+0m5.fiasco
+ $ 0xFFFF -M kernel_2.6.28-20103103+0m5.fiasco -u
 
-Flashed image must start with 2 kB "NOLO!img" header which contains size of
-the image. Header consist of bytes "NOLO!img\x02\x00\x00\x00\x00\x00\x00\x00"
+Flashed image must start with 2 kB ``NOLO!img`` header which contains size of
+the image. Header consist of bytes ``NOLO!img\x02\x00\x00\x00\x00\x00\x00\x00``
  followed by 4 byte little endian size of the image and rest of the 2 kB header
  are just zero bytes.
 
  Nokia proprietary flasher and also open source 0xFFFF flasher automatically
-prepend required "NOLO!img" header and both applications expect that image
-does not contain "NOLO!img" header. Adding "NOLO!img" header is required
-only in case using "nandwrite" tool for flashing.
+prepend required ``NOLO!img`` header and both applications expect that image
+does not contain ``NOLO!img`` header. Adding ``NOLO!img`` header is required
+only in case using ``nandwrite`` tool for flashing.
 
  Open source 0xFFFF flasher is available in following repository:
 
-  https://github.com/pali/0xFFFF
+ https://github.com/pali/0xFFFF
 
-It is possible to load u-boot.bin via USB to N900 RAM and boot it without
-need to flashing it. Via 0xFFFF running at host PC it is done:
+It is possible to load ``u-boot.bin`` via USB to N900 RAM and boot it without
+need to flashing it. Via 0xFFFF running at host PC it is done::
 
-  0xFFFF -m u-boot.bin -l -b
+ $ 0xFFFF -m u-boot.bin -l -b
 
  0xFFFF support also flashing kernel image either via USB or directly on
-N900 device. Flashing u-boot/kernel/combined image is done as:
+N900 device. Flashing u-boot/kernel/combined image is done as::
 
-  0xFFFF -m combined.bin -f
+ $ 0xFFFF -m combined.bin -f
 
  Via 0xFFFF is possible to generate also standard flashable image in Nokia
  FIASCO format which contains metadata information like device identification
-(RX-51) and version string (v2021.04):
+(RX-51) and version string (v2021.04)::
 
-  0xFFFF -m RX-51:v2021.04:kernel:u-boot.bin -g u-boot.fiasco
+ $ 0xFFFF -m RX-51:v2021.04:kernel:u-boot.bin -g u-boot.fiasco
 
  There is support for hardware watchdog. Hardware watchdog is started by
  NOLO so u-boot must kick watchdog to prevent reboot device (but not very
@@ -77,62 +80,67 @@ which is needed for Thumb-2 ISA support. It is workaround for errata 430973.
 
  Default boot order:
 
- * 0. if keyboard is closed boot automatically attached kernel image
- * 1. try boot from external SD card
- * 2. try boot from internal eMMC memory
- * 3. try boot from attached kernel image
+0. if keyboard is closed boot automatically attached kernel image
+1. try boot from external SD card
+2. try boot from internal eMMC memory
+3. try boot from attached kernel image
 
  Boot from SD or eMMC in this order:
 
- * 1.
-   * 1.1 find boot.scr on first fat partition
-   * 1.2 find uImage on first fat partition
-   * 1.3 find zImage on first fat partition
-   * 1.4 same order for 2. - 4. fat partition
- * 2. same as 1. but for ext2/3/4 partition
+* 1. step
+
+  * 1.1 find ``boot.scr`` on first fat partition
+  * 1.2 find ``uImage`` on first fat partition
+  * 1.3 find ``zImage`` on first fat partition
+  * 1.4 same order for 2. - 4. fat partition
 
+* 2. step - same as 1. but for ext2/3/4 partition
 
  Available additional commands/variables:
 
- * run sdboot - Boot from external SD card (see boot order)
- * run emmcboot - Boot from internal eMMC memory (see boot order)
- * run attachboot - Boot attached kernel image (attached to U-Boot binary)
+* run sdboot - Boot from external SD card (see boot order)
+* run emmcboot - Boot from internal eMMC memory (see boot order)
+* run attachboot - Boot attached kernel image (attached to U-Boot binary)
+
+\
+
+* run scriptload - Load boot script ``${mmcscriptfile}``
+* run scriptboot - Run loaded boot script
+* run kernload - Load kernel image ``${mmckernfile}``
+* run initrdload - Load initrd image ``${mmcinitrdfile}``
+* run kernboot - Boot loaded kernel image
+* run kerninitrdboot - Boot loaded kernel image with loaded initrd image
 
- * run scriptload - Load boot script ${mmcscriptfile}
- * run scriptboot - Run loaded boot script
- * run kernload - Load kernel image ${mmckernfile}
- * run initrdload - Load initrd image ${mmcinitrdfile}
- * run kernboot - Boot loaded kernel image
- * run kerninitrdboot - Boot loaded kernel image with loaded initrd image
+\
 
- * run trymmcscriptboot - Try to load and boot script ${mmcscriptfile}
- * run trymmckernboot - Try to load and boot kernel image ${mmckernfile}
- * run trymmckerninitrdboot - Try to load and boot kernel image ${mmckernfile}
-                              with initrd image ${mmcinitrdfile}
+* run trymmcscriptboot - Try to load and boot script ``${mmcscriptfile}``
+* run trymmckernboot - Try to load and boot kernel image ``${mmckernfile}``
+* run trymmckerninitrdboot - Try to load and boot kernel image ``${mmckernfile}``
+  with initrd image ``${mmcinitrdfile}``
 
  Additional variables for loading files from mmc:
 
- * mmc ${mmcnum} (0 - external, 1 - internal)
- * partition number ${mmcpart} (1 - 4)
- * partition type ${mmctype} (fat, ext2, ext4; ext2 is just alias for ext4)
+* mmc ``${mmcnum}`` (0 - external, 1 - internal)
+* partition number ``${mmcpart}`` (1 - 4)
+* partition type ``${mmctype}`` (fat, ext2, ext4; ext2 is just alias for ext4)
 
  Additional variables for booting kernel:
 
- * setup_omap_atag - Add OMAP table into atags structure (needs maemo kernel)
- * setup_console_atag - Enable serial console in OMAP table
- * setup_boot_reason_atag - Change boot reason in OMAP table
- * setup_boot_mode_atag - Change boot mode in OMAP table
+* ``setup_omap_atag`` - Add OMAP table into atags structure (needed for maemo kernel)
+* ``setup_console_atag`` - Enable serial console in OMAP table
+* ``setup_boot_reason_atag`` - Change boot reason in OMAP table
+* ``setup_boot_mode_atag`` - Change boot mode in OMAP table
 
- Variable setup_omap_atag is automatically set when booting attached kernel.
- When variable setup_omap_atag is set, variable setup_console_atag is unset
- and u-boot standard output is set to serial then setup_console_atag is
- automatically set to 1. So output from Maemo kernel would go to serial port.
+Variable ``setup_omap_atag`` is automatically set when booting attached kernel.
+When variable ``setup_omap_atag`` is set, variable ``setup_console_atag`` is unset
+and u-boot standard output is set to serial then ``setup_console_atag`` is
+automatically set to 1. So output from Maemo kernel would go to serial port.
 
  UBIFS support:
 
- UBIFS support is disabled, because U-Boot image is too big and cannot be
- flashed with attached zImage to RX-51 kernel nand area. For enabling UBIFS
- support add following lines into file configs/nokia_rx51_defconfig
+UBIFS support is disabled, because U-Boot image is too big and cannot be
+flashed with attached kernel image to RX-51 kernel nand area. For enabling
+UBIFS support add following lines into file ``configs/nokia_rx51_defconfig``::
 
   CONFIG_CMD_UBI=y
   CONFIG_CMD_UBIFS=y
#5 lore raw

Re: [RESEND PATCH 3/3] Nokia RX-51: Convert documentation to rst format

Quoted 9 lines · On Tuesday 25 January 2022 06:03:26 Heinrich Schuchardt wrote:
Quoted 3 lines · Pali Rohár

Convert documentation to rst format

Thanks for converting to rst.

I guess I will simply add all 3 patches to my repo and add all typo fixes to patch 3.

Ok, thank you!

Quoted 11 lines
Quoted 9 lines
---
  board/nokia/rx51/MAINTAINERS                  |   2 +-
  doc/board/index.rst                           |   1 +
  doc/board/nokia/index.rst                     |   9 ++
  .../nokia/rx51.rst}                           | 144 +++++++++---------
  4 files changed, 87 insertions(+), 69 deletions(-)

create mode 100644 doc/board/nokia/index.rst rename doc/{README.nokia_rx51 => board/nokia/rx51.rst} (32%)