xen/arm64: io: Decode ldr/str post-indexing instructions
PATCH v4 1/1 xen/arm64: io: Decode ldr/str post-indexing instructions
At the moment, Xen is only handling data abort with valid syndrome (i.e. ISV=0). Unfortunately, this doesn't cover all the instructions a domain could use to access MMIO regions.
For instance, a baremetal OS can use any of the following instructions, where x1 contains the address of the MMIO region:
1. ldr x2, [x1], #8 2. ldr w2, [x1], #-4 3. ldr x2, [x1], #-8 4. ldr w2, [x1], #4 5. ldrh w2, [x1], #2 6. ldrb w2, [x1], #1 7. str x2, [x1], #8 8. str w2, [x1], #-4 9. strh w2, [x1], #2 10. strb w2, [x1], #1
In the following two instructions, Rn could theoretically be stack pointer which might contain the address of the MMIO region:-
11. ldrb w2, [Rn], #1 12. ldrb wzr, [Rn], #1
In order to handle post-indexing store/load instructions (like those mentioned above), Xen will need to fetch and decode the instruction.
This patch only cover post-index store/load instructions from AArch64 mode. For now, this is left unimplemented for trap from AArch32 mode.
---
Changelog :-
v2 - 1. Updated the rn register after reading from it. (Pointed by Julien,
Stefano)
2. Used a union to represent the instruction opcode (Suggestd by Bertrand)
3. Fixed coding style issues (Pointed by Julien)
4. In the previous patch, I was updating dabt->sign based on the signedness of imm9. This was incorrect. As mentioned in ARMv8 ARM DDI 0487G.b, Page 3221, SSE indicates the signedness of the data item loaded. In our case, the data item loaded is always unsigned.
v3- 1. Handled all the variants of ldr/str (ie 64, 32, 16, 8 bit variants).
Thus, I have removed the check for "instr->code.opc == 0" (Suggested by Andre)
2. Handled the scenario when rn = SP, rt = XZR (Suggested by Jan, Andre)
3. Added restriction for "rt != rn" (Suggested by Andre)
4. Moved union ldr_str_instr_class {} to decode.h. This is the header included by io.c and decode.c (where the union is referred). (Suggested by Jan)
5. Indentation and typo fixes (Suggested by Jan)
v4- 1. Fixed the patch as per Stefano's comments on v3. They are as follows :-
1.1 Use macros to determine the fixed values in the instruction opcode 1.2 Checked if instr != NULL
1.3 Changed some data types and added #define ARM_64 for AArch64 specific
code
1.4 Moved post_increment_register() to decode.c so that the decoding
logic is confined to a single file.
1.5 Moved some checks from post_increment_register() to
decode_loadstore_postindexing()
1.6 Removed a duplicate check
2. Updated the commit message as per Andre's comments.
3. Changed the names of a label and some comments. *32bit* was erroneously mentioned in a label and comments in decode_loadstore_postindexing() although the function handled all variants of ldr/str post indexing.
xen/arch/arm/decode.c | 124 +++++++++++++++++++++++++++++++++++++++++- xen/arch/arm/decode.h | 41 +++++++++++++- xen/arch/arm/io.c | 41 +++++++++++--- 3 files changed, 195 insertions(+), 11 deletions(-)
xen/arch/arm/decode.c +123 -1
@@ -84,6 +84,101 @@ bad_thumb2:return 1 ; } +static int decode_loadstore_postindexing (register_t pc, +struct hsr_dabt *dabt, +union ldr_str_instr_class *instr) +{ +struct cpu_user_regs *regs =guest_cpu_user_regs (); + +if ( instr ==NULL ) + { +gprintk (XENLOG_ERR ,"instr should not be NULL\n" ); +return -EINVAL ; + } + +if (raw_copy_from_guest (&instr->value, (void *__user )pc,sizeof (instr)) ) + { +gprintk (XENLOG_ERR ,"Could not copy the instruction from PC\n" ); +return -EFAULT ; + } + +/* +* Rn -ne Rt for ldr/str instruction. +* Check https://developer.arm.com/documentation/dui0802/a/CIHGJHED +* (Register restrictions) +* +* The only exception for this is when rn = 31. It denotes SP ("Use of SP") +* +* And when rt = 31, it denotes wzr/xzr. (Refer +* https://developer.arm.com/documentation/den0024/a/ARMv8-Registers/AArch64-special-registers +* "There is no register called X31 or W31. Many instructions are encoded +* such that the number 31 represents the zero register, ZR (WZR/XZR)." +*/ +if ( (instr->code.rn == instr->code.rt) && (instr->code.rn !=31 ) ) + { +gprintk (XENLOG_ERR ,"Rn should not be equal to Rt except for r31\n" ); +return -EINVAL ; + } + +/* First, let's check for the fixed values */ +if ( (instr->value &POST_INDEX_FIXED_MASK ) !=POST_INDEX_FIXED_VALUE ) + { +gprintk (XENLOG_ERR ,"Cannot decode instruction 0x%x" ,instr->value); +gprintk (XENLOG_ERR ,"Decoding not supported for instructions other than" +" ldr/str post indexing\n" ); + goto bad_loadstore; + } + +/* +* Handle when rn = SP +* Refer ArmV8 ARM DDI 0487G.b, Page - D1-2463 "Stack pointer register selection" +* As we are interested in handling exceptions only from EL1 in AArch64 state, +* thus M[3:0] == EL1h (Page - C5-480 "When exception taken from AArch64 state:") +*/ +if ( (instr->code.rn ==31 ) && ((regs->cpsr &PSR_MODE_MASK ) != PSR_MODE_EL1h) ) + { +gprintk (XENLOG_ERR ,"SP is valid only for EL1h\n" ); + goto bad_loadstore; + } + +if ( instr->code.v !=0 ) + { +gprintk (XENLOG_ERR , +"ldr/str post indexing for vector types are not supported\n" ); + goto bad_loadstore; + } + +/* Check for STR (immediate) */ +if ( instr->code.opc ==0 ) + { + dabt->write =1 ; + } +/* Check for LDR (immediate) */ +else if ( instr->code.opc ==1 ) + { + dabt->write =0 ; + } +else + { +gprintk (XENLOG_ERR , +"Decoding ldr/str post indexing is not supported for this variant\n" ); + goto bad_loadstore; + } + +gprintk (XENLOG_INFO , +"instr->code.rt = 0x%x, instr->code.size = 0x%x, instr->code.imm9 = %d\n" , + instr->code.rt, instr->code.size, instr->code.imm9); + +update_dabt (dabt, instr->code.rt, instr->code.size, false); + dabt->valid =1 ; + +return 0 ; + + bad_loadstore: +gprintk (XENLOG_ERR ,"unhandled Arm instruction 0x%x\n" , instr->value); +return 1 ; +} +static int decode_thumb (register_t pc,struct hsr_dabt *dabt) {uint16_t instr;
@@ -150,17 +245,44 @@ bad_thumb:return 1 ; } -int decode_instruction (const struct cpu_user_regs *regs,struct hsr_dabt *dabt) +int decode_instruction (const struct cpu_user_regs *regs,struct hsr_dabt *dabt, +union ldr_str_instr_class *instr) {if (is_32bit_domain (current->domain) && regs->cpsr &PSR_THUMB )return decode_thumb (regs->pc, dabt); +if ( (is_64bit_domain (current->domain) && !psr_mode_is_32bit (regs)) ) + { +return decode_loadstore_postindexing (regs->pc, dabt, instr); + } +/* TODO: Handle ARM instruction */ gprintk (XENLOG_ERR ,"unhandled ARM instruction\n" );return 1 ; } +#if CONFIG_ARM_64 +void post_increment_register (union ldr_str_instr_class *instr) +{ +struct cpu_user_regs *regs =guest_cpu_user_regs (); +register_t val; + +/* handle when rn = SP */ +if ( instr->code.rn ==31 ) + val = regs->sp_el1; +else + val =get_user_reg (regs, instr->code.rn); + + val += instr->code.imm9; + +if ( instr->code.rn ==31 ) + regs->sp_el1 = val; +else +set_user_reg (regs, instr->code.rn, val); +} +#endif +/* * Local variables: * mode: C
xen/arch/arm/decode.h +40 -1
54 lines not on this page · raw message
xen/arch/arm/io.c +32 -9
72 lines not on this page · raw message
Signature · 1 line
2.17.1
Quoted 20 lines · Ayan Kumar Halder
At the moment, Xen is only handling data abort with valid syndrome (i.e. ISV=0). Unfortunately, this doesn't cover all the instructions a domain could use to access MMIO regions.
For instance, a baremetal OS can use any of the following instructions, where x1 contains the address of the MMIO region:
1. ldr x2, [x1], #8 2. ldr w2, [x1], #-4 3. ldr x2, [x1], #-8 4. ldr w2, [x1], #4 5. ldrh w2, [x1], #2 6. ldrb w2, [x1], #1 7. str x2, [x1], #8 8. str w2, [x1], #-4 9. strh w2, [x1], #2 10. strb w2, [x1], #1In the following two instructions, Rn could theoretically be stack pointer which might contain the address of the MMIO region:-
Quoted 8 lines
11. ldrb w2, [Rn], #1 12. ldrb wzr, [Rn], #1In order to handle post-indexing store/load instructions (like those mentioned above), Xen will need to fetch and decode the instruction.
This patch only cover post-index store/load instructions from AArch64 mode. For now, this is left unimplemented for trap from AArch32 mode.
NIT: "For now, AArch32 mode is left unimplemented."
Quoted 235 lines
Signed-off-by Ayan Kumar Halder <[email protected]>---
Changelog :-
v2 - 1. Updated the rn register after reading from it. (Pointed by Julien,
Stefano)
2. Used a union to represent the instruction opcode (Suggestd by Bertrand)
3. Fixed coding style issues (Pointed by Julien)
4. In the previous patch, I was updatingdabt->signbased on the signedness of imm9. This was incorrect. As mentioned in ARMv8 ARM DDI 0487G.b, Page 3221, SSE indicates the signedness of the data item loaded. In our case, the data item loaded is always unsigned.v3- 1. Handled all the variants of ldr/str (ie 64, 32, 16, 8 bit variants).
Thus, I have removed the check for "instr->code.opc== 0" (Suggested by Andre)
2. Handled the scenario when rn = SP, rt = XZR (Suggested by Jan, Andre)
3. Added restriction for "rt != rn" (Suggested by Andre)
4. Moved unionldr_str_instr_class{} todecode.h. This is the header included byio.canddecode.c(where the union is referred). (Suggested by Jan)
5. Indentation and typo fixes (Suggested by Jan)v4- 1. Fixed the patch as per Stefano's comments on v3. They are as follows :-
1.1 Use macros to determine the fixed values in the instruction opcode 1.2 Checked if instr != NULL
1.3 Changed some data types and added #defineARM_64for AArch64 specific
code
1.4 Movedpost_increment_register()todecode.cso that the decoding
logic is confined to a single file.
1.5 Moved some checks frompost_increment_register()to
decode_loadstore_postindexing()
1.6 Removed a duplicate check
2. Updated the commit message as per Andre's comments.
3. Changed the names of a label and some comments. *32bit* was erroneously mentioned in a label and comments indecode_loadstore_postindexing()although the function handled all variants of ldr/str post indexing.xen/arch/arm/decode.c | 124 +++++++++++++++++++++++++++++++++++++++++- xen/arch/arm/decode.h | 41 +++++++++++++- xen/arch/arm/io.c | 41 +++++++++++--- 3 files changed, 195 insertions(+), 11 deletions(-)xen/arch/arm/decode.c +123
-1@@ -84,6 +84,101 @@ bad_thumb2:return 1 ; } +static int decode_loadstore_postindexing (register_t pc, +struct hsr_dabt *dabt, +union ldr_str_instr_class *instr) +{ +struct cpu_user_regs *regs =guest_cpu_user_regs (); + +if ( instr ==NULL ) + { +gprintk (XENLOG_ERR ,"instr should not be NULL\n" ); +return -EINVAL ; + } + +if (raw_copy_from_guest (&instr->value, (void *__user )pc,sizeof (instr)) ) + { +gprintk (XENLOG_ERR ,"Could not copy the instruction from PC\n" ); +return -EFAULT ; + } + +/* +* Rn -ne Rt for ldr/str instruction. +* Check https://developer.arm.com/documentation/dui0802/a/CIHGJHED +* (Register restrictions) +* +* The only exception for this is when rn = 31. It denotes SP ("Use of SP") +* +* And when rt = 31, it denotes wzr/xzr. (Refer +* https://developer.arm.com/documentation/den0024/a/ARMv8-Registers/AArch64-special-registers +* "There is no register called X31 or W31. Many instructions are encoded +* such that the number 31 represents the zero register, ZR (WZR/XZR)." +*/ +if ( (instr->code.rn == instr->code.rt) && (instr->code.rn !=31 ) ) + { +gprintk (XENLOG_ERR ,"Rn should not be equal to Rt except for r31\n" ); +return -EINVAL ; + } + +/* First, let's check for the fixed values */ +if ( (instr->value &POST_INDEX_FIXED_MASK ) !=POST_INDEX_FIXED_VALUE ) + { +gprintk (XENLOG_ERR ,"Cannot decode instruction 0x%x" ,instr->value); +gprintk (XENLOG_ERR ,"Decoding not supported for instructions other than" +" ldr/str post indexing\n" ); + goto bad_loadstore; + } + +/* +* Handle when rn = SP +* Refer ArmV8 ARM DDI 0487G.b, Page - D1-2463 "Stack pointer register selection" +* As we are interested in handling exceptions only from EL1 in AArch64 state, +* thus M[3:0] == EL1h (Page - C5-480 "When exception taken from AArch64 state:") +*/ +if ( (instr->code.rn ==31 ) && ((regs->cpsr &PSR_MODE_MASK ) != PSR_MODE_EL1h) ) + { +gprintk (XENLOG_ERR ,"SP is valid only for EL1h\n" ); + goto bad_loadstore; + } + +if ( instr->code.v !=0 ) + { +gprintk (XENLOG_ERR , +"ldr/str post indexing for vector types are not supported\n" ); + goto bad_loadstore; + } + +/* Check for STR (immediate) */ +if ( instr->code.opc ==0 ) + { + dabt->write =1 ; + } +/* Check for LDR (immediate) */ +else if ( instr->code.opc ==1 ) + { + dabt->write =0 ; + } +else + { +gprintk (XENLOG_ERR , +"Decoding ldr/str post indexing is not supported for this variant\n" ); + goto bad_loadstore; + } + +gprintk (XENLOG_INFO , +"instr->code.rt = 0x%x, instr->code.size = 0x%x, instr->code.imm9 = %d\n" , + instr->code.rt, instr->code.size, instr->code.imm9); + +update_dabt (dabt, instr->code.rt, instr->code.size, false); + dabt->valid =1 ; + +return 0 ; + + bad_loadstore: +gprintk (XENLOG_ERR ,"unhandled Arm instruction 0x%x\n" , instr->value); +return 1 ; +} +static int decode_thumb (register_t pc,struct hsr_dabt *dabt) {uint16_t instr;@@ -150,17 +245,44 @@ bad_thumb:return 1 ; } -int decode_instruction (const struct cpu_user_regs *regs,struct hsr_dabt *dabt) +int decode_instruction (const struct cpu_user_regs *regs,struct hsr_dabt *dabt, +union ldr_str_instr_class *instr) {if (is_32bit_domain (current->domain) && regs->cpsr &PSR_THUMB )return decode_thumb (regs->pc, dabt); +if ( (is_64bit_domain (current->domain) && !psr_mode_is_32bit (regs)) ) + { +return decode_loadstore_postindexing (regs->pc, dabt, instr); + } +/* TODO: Handle ARM instruction */ gprintk (XENLOG_ERR ,"unhandled ARM instruction\n" );return 1 ; } +#if CONFIG_ARM_64 +void post_increment_register (union ldr_str_instr_class *instr) +{ +struct cpu_user_regs *regs =guest_cpu_user_regs (); +register_t val; + +/* handle when rn = SP */ +if ( instr->code.rn ==31 ) + val = regs->sp_el1; +else + val =get_user_reg (regs, instr->code.rn); + + val += instr->code.imm9; + +if ( instr->code.rn ==31 ) + regs->sp_el1 = val; +else +set_user_reg (regs, instr->code.rn, val); +} +#endif +/* * Local variables: * mode: C xen/arch/arm/decode.h +29
-0@@ -23,6 +23,35 @@#include <asm/regs.h> #include <asm/processor.h> +/* +* Refer to the ARMv8 ARM (DDI 0487G.b), Section C4.1.4 Loads and Stores +* Page 318 specifies the following bit pattern for +* "load/store register (immediate post-indexed)". +* +* 31 30 29 27 26 25 23 21 20 11 9 4 0 +* ___________________________________________________________________ +* |size|1 1 1 |V |0 0 |opc |0 | imm9 |0 1 | Rn | Rt | +* |____|______|__|____|____|__|_______________|____|_________|_______| +*/ +union ldr_str_instr_class { +uint32_t value; +struct ldr_str { +unsigned int rt:5 ;/* Rt register */ +unsigned int rn:5 ;/* Rn register */ +unsigned int fixed1:2 ;/* value == 01b */ +signed int imm9:9 ;/* imm9 */ +unsigned int fixed2:1 ;/* value == 0b */ +unsigned int opc:2 ;/* opc */ +unsigned int fixed3:2 ;/* value == 00b */ +unsigned int v:1 ;/* vector */ +unsigned int fixed4:3 ;/* value == 111b */ +unsigned int size:2 ;/* size */ + } code; +}; + +#define POST_INDEX_FIXED_MASK 0x3B200C00 +#define POST_INDEX_FIXED_VALUE 0x38000400 +/** * Decode an instruction from pc * /!\ This function is not intended to fully decode an instruction. It
xen/arch/arm/decode.h line 70
Quoted 8 lines
xen/arch/arm/decode.h +3
-1@@ -35,8 +64,18 @@*/ int decode_instruction (const struct cpu_user_regs *regs, -struct hsr_dabt *dabt); +struct hsr_dabt *dabt, +union ldr_str_instr_class *instr); +/**
NIT: the Xen coding style only has /*, not /**
In any case aside from these two minor NITs that can be fixed on commit:
Quoted 94 lines
xen/arch/arm/decode.h +8
-0+* Update the register value for Rn +* /!\ This function is used to update the register value for Rn when a +* post indexing ldr/str instruction is decoded. +* +* This function will get: +* - The post indexing ldr/str instruction opcode +*/ +void post_increment_register (union ldr_str_instr_class *instr);#endif /* __ARCH_ARM_DECODE_H_ */ /* xen/arch/arm/io.c +32
-9@@ -106,14 +106,29 @@ enum io_state try_handle_mmio(struct cpu_user_regs *regs, .gpa = gpa, .dabt = dabt }; +int rc; +union ldr_str_instr_class instr = {0 };ASSERT (hsr.ec ==HSR_EC_DATA_ABORT_LOWER_EL ); +/* +* Armv8 processor does not provide a valid syndrome for post-indexing +* ldr/str instructions. So in order to process these instructions, +* Xen must decode them. +*/ +if ( !info.dabt.valid ) + { + rc =decode_instruction (regs, &info.dabt, &instr); +if ( rc ) + { +gprintk (XENLOG_DEBUG ,"Unable to decode instruction\n" ); +return IO_ABORT ; + } + } + handler =find_mmio_handler (v->domain, info.gpa);if ( !handler ) { -int rc; - rc =try_fwd_ioserv (regs, v, &info);if ( rc ==IO_HANDLED )return handle_ioserv (regs, v);@@ -121,10 +136,6 @@ enum io_state try_handle_mmio(struct cpu_user_regs *regs,return rc; } -/* All the instructions used on emulated MMIO region should be valid */ -if ( !dabt.valid ) -return IO_ABORT ; -/* * Erratum 766422: Thumb store translation fault to Hypervisor may * not have correct HSR Rt value. @@ -134,7 +145,7 @@ enum io_state try_handle_mmio(struct cpu_user_regs *regs, {int rc; - rc =decode_instruction (regs, &info.dabt); + rc =decode_instruction (regs, &info.dabt,NULL );if ( rc ) {gprintk (XENLOG_DEBUG ,"Unable to decode instruction\n" );@@ -143,9 +154,21 @@ enum io_state try_handle_mmio(struct cpu_user_regs *regs, }if ( info.dabt.write ) -return handle_write (handler, v, &info); + rc =handle_write (handler, v, &info);else -return handle_read (handler, v, &info); + rc =handle_read (handler, v, &info); + +#if CONFIG_ARM_64 +if ( (is_64bit_domain (current->domain) && !psr_mode_is_32bit (regs)) ) + { +if ( instr.value !=0 ) + { +post_increment_register (&instr); + } + } +#endif + +return rc; } void register_mmio_handler(struct domain *d,Signature · 1 line
2.17.1
Hi,
Quoted 76 lines · Ayan Kumar Halder
At the moment, Xen is only handling data abort with valid syndrome (i.e. ISV=0). Unfortunately, this doesn't cover all the instructions a domain could use to access MMIO regions.
For instance, a baremetal OS can use any of the following instructions, where x1 contains the address of the MMIO region:
1. ldr x2, [x1], #8 2. ldr w2, [x1], #-4 3. ldr x2, [x1], #-8 4. ldr w2, [x1], #4 5. ldrh w2, [x1], #2 6. ldrb w2, [x1], #1 7. str x2, [x1], #8 8. str w2, [x1], #-4 9. strh w2, [x1], #2 10. strb w2, [x1], #1In the following two instructions, Rn could theoretically be stack pointer which might contain the address of the MMIO region:-
11. ldrb w2, [Rn], #1 12. ldrb wzr, [Rn], #1In order to handle post-indexing store/load instructions (like those mentioned above), Xen will need to fetch and decode the instruction.
This patch only cover post-index store/load instructions from AArch64 mode. For now, this is left unimplemented for trap from AArch32 mode.
Signed-off-by Ayan Kumar Halder <[email protected]>---
Changelog :-
v2 - 1. Updated the rn register after reading from it. (Pointed by Julien,
Stefano)
2. Used a union to represent the instruction opcode (Suggestd by Bertrand)
3. Fixed coding style issues (Pointed by Julien)
4. In the previous patch, I was updatingdabt->signbased on the signedness of imm9. This was incorrect. As mentioned in ARMv8 ARM DDI 0487G.b, Page 3221, SSE indicates the signedness of the data item loaded. In our case, the data item loaded is always unsigned.v3- 1. Handled all the variants of ldr/str (ie 64, 32, 16, 8 bit variants).
Thus, I have removed the check for "instr->code.opc== 0" (Suggested by Andre)
2. Handled the scenario when rn = SP, rt = XZR (Suggested by Jan, Andre)
3. Added restriction for "rt != rn" (Suggested by Andre)
4. Moved unionldr_str_instr_class{} todecode.h. This is the header included byio.canddecode.c(where the union is referred). (Suggested by Jan)
5. Indentation and typo fixes (Suggested by Jan)v4- 1. Fixed the patch as per Stefano's comments on v3. They are as follows :-
1.1 Use macros to determine the fixed values in the instruction opcode 1.2 Checked if instr != NULL
1.3 Changed some data types and added #defineARM_64for AArch64 specific
code
1.4 Movedpost_increment_register()todecode.cso that the decoding
logic is confined to a single file.
1.5 Moved some checks frompost_increment_register()to
decode_loadstore_postindexing()
1.6 Removed a duplicate check
2. Updated the commit message as per Andre's comments.
3. Changed the names of a label and some comments. *32bit* was erroneously mentioned in a label and comments indecode_loadstore_postindexing()although the function handled all variants of ldr/str post indexing.xen/arch/arm/decode.c | 124 +++++++++++++++++++++++++++++++++++++++++- xen/arch/arm/decode.h | 41 +++++++++++++- xen/arch/arm/io.c | 41 +++++++++++--- 3 files changed, 195 insertions(+), 11 deletions(-)xen/arch/arm/decode.c +0
-0
xen/arch/arm/decode.c bad_thumb2: · line 87
Quoted 4 lines
xen/arch/arm/decode.c +1
-0@@ -84,6 +84,101 @@ bad_thumb2:return 1 ; } +static int decode_loadstore_postindexing(register_t pc,
This is only handling AArch64 instruction. So please add aarch64 (or arm64) in the name.
xen/arch/arm/decode.c bad_thumb2: · line 93
Quoted 6 lines
xen/arch/arm/decode.c +6
-0+struct hsr_dabt *dabt, + union ldr_str_instr_class *instr) +{ + struct cpu_user_regs *regs = guest_cpu_user_regs(); + +if ( instr ==NULL )
Wouldn't it be a programming error? If so, should it be ASSERT(...)?
Quoted 5 lines
xen/arch/arm/decode.c +5
-0+ { +gprintk (XENLOG_ERR ,"instr should not be NULL\n" ); +return -EINVAL ; + } +
xen/arch/arm/decode.c bad_thumb2: · line 108
Quoted 10 lines
xen/arch/arm/decode.c +10
-0+if (raw_copy_from_guest (&instr->value, (void *__user )pc,sizeof (instr)) ) + { +gprintk (XENLOG_ERR ,"Could not copy the instruction from PC\n" ); +return -EFAULT ; + } + +/* +* Rn -ne Rt for ldr/str instruction. +* Check https://developer.arm.com/documentation/dui0802/a/CIHGJHED +* (Register restrictions)
I find a bit odd that you are pointing to 3 different spec (Compiler, Cortex-A, Arm Arm). Can we please use only the Arm Arm? It should contain everything we need...
xen/arch/arm/decode.c bad_thumb2: · line 113
Quoted 5 lines
xen/arch/arm/decode.c +5
-0+* +* The only exception for this is when rn = 31. It denotes SP ("Use of SP") +* +* And when rt = 31, it denotes wzr/xzr. (Refer +* https://developer.arm.com/documentation/den0024/a/ARMv8-Registers/AArch64-special-registers
Same here.
Also, please avoid URL and use the document reference (e.g. ARM DDI 0487F.c for the Arm Arm) are they are easy to find on google.
Quoted 5 lines
xen/arch/arm/decode.c +5
-0+* "There is no register called X31 or W31. Many instructions are encoded +* such that the number 31 represents the zero register, ZR (WZR/XZR)." +*/ +if ( (instr->code.rn == instr->code.rt) && (instr->code.rn !=31 ) ) + {
xen/arch/arm/decode.c bad_thumb2: · line 128
Quoted 10 lines
xen/arch/arm/decode.c +10
-0+gprintk (XENLOG_ERR ,"Rn should not be equal to Rt except for r31\n" ); +return -EINVAL ; + } + +/* First, let's check for the fixed values */ +if ( (instr->value &POST_INDEX_FIXED_MASK ) !=POST_INDEX_FIXED_VALUE ) + { +gprintk (XENLOG_ERR ,"Cannot decode instruction 0x%x" ,instr->value); +gprintk (XENLOG_ERR ,"Decoding not supported for instructions other than" +" ldr/str post indexing\n" );
Please don't split the message. Instead, it should be:
gprintk(XENLOG_ERR,
"...");
But I would combine the two messages and simply write:
"Decoding instruction 0x%x is not supported". Not need to say that we support only ldr/str post indexing.
xen/arch/arm/decode.c bad_thumb2: · line 129
Quoted 1 line
xen/arch/arm/decode.c +1
-0+ goto bad_loadstore;
I am a bit confused why some of the error path is using error and other goto. Can you clarify it?
xen/arch/arm/decode.c bad_thumb2: · line 136
Quoted 7 lines
xen/arch/arm/decode.c +7
-0+ } + +/* +* Handle when rn = SP +* Refer ArmV8 ARM DDI 0487G.b, Page - D1-2463 "Stack pointer register selection" +* As we are interested in handling exceptions only from EL1 in AArch64 state, +* thus M[3:0] == EL1h (Page - C5-480 "When exception taken from AArch64 state:")
I read the last sentence as "We only support decoding from instruction run at EL1". But I can't find a check guarantee that.
Quoted 9 lines
xen/arch/arm/decode.c +9
-0+*/ +if ( (instr->code.rn ==31 ) && ((regs->cpsr &PSR_MODE_MASK ) != PSR_MODE_EL1h) ) + { +gprintk (XENLOG_ERR ,"SP is valid only for EL1h\n" ); + goto bad_loadstore; + } + +if ( instr->code.v !=0 ) + {
xen/arch/arm/decode.c bad_thumb2: · line 155
Quoted 10 lines
xen/arch/arm/decode.c +10
-0+gprintk (XENLOG_ERR , +"ldr/str post indexing for vector types are not supported\n" ); + goto bad_loadstore; + } + +/* Check for STR (immediate) */ +if ( instr->code.opc ==0 ) + { + dabt->write =1 ; + }
Coding style: We don't use {} for single line. In this case, it would also result to have a more readable code.
xen/arch/arm/decode.c bad_thumb2: · line 160
Quoted 5 lines
xen/arch/arm/decode.c +5
-0+/* Check for LDR (immediate) */ + else if ( instr->code.opc == 1 ) + { + dabt->write =0 ; + }
Same.
xen/arch/arm/decode.c bad_thumb2: · line 164
Quoted 4 lines
xen/arch/arm/decode.c +4
-0+else + { +gprintk (XENLOG_ERR , +"Decoding ldr/str post indexing is not supported for this variant\n" );
The indentation looks wrong here.
xen/arch/arm/decode.c bad_thumb2: · line 170
Quoted 6 lines
xen/arch/arm/decode.c +6
-0+ goto bad_loadstore; + } + +gprintk (XENLOG_INFO , +"instr->code.rt = 0x%x, instr->code.size = 0x%x, instr->code.imm9 = %d\n" , + instr->code.rt, instr->code.size, instr->code.imm9);
The indentation looks wrong here.
Quoted 15 lines
xen/arch/arm/decode.c +11
-0+ +update_dabt (dabt, instr->code.rt, instr->code.size, false); + dabt->valid =1 ; + +return 0 ; + + bad_loadstore: +gprintk (XENLOG_ERR ,"unhandled Arm instruction 0x%x\n" , instr->value); +return 1 ; +} +static int decode_thumb (register_t pc,struct hsr_dabt *dabt) {uint16_t instr;
xen/arch/arm/decode.c bad_thumb: · line 249
Quoted 6 lines
xen/arch/arm/decode.c +2
-1@@ -150,17 +245,44 @@ bad_thumb:return 1 ; } -int decode_instruction (const struct cpu_user_regs *regs,struct hsr_dabt *dabt) +int decode_instruction (const struct cpu_user_regs *regs,struct hsr_dabt *dabt, +union ldr_str_instr_class *instr)
I would like to avoid make the assumption that the instr we decode will always be a store/load. So please rename it to something more generic.
xen/arch/arm/decode.c bad_thumb: · line 254
Quoted 5 lines
xen/arch/arm/decode.c +1
-0{if (is_32bit_domain (current->domain) && regs->cpsr &PSR_THUMB )return decode_thumb (regs->pc, dabt); +if ( (is_64bit_domain (current->domain) && !psr_mode_is_32bit (regs)) )
The first part could be dropped because if psr_mode_is_32bit returns 0 then it must mean the domain is 64-bit.
xen/arch/arm/decode.c bad_thumb: · line 257
Quoted 3 lines
xen/arch/arm/decode.c +3
-0+ { +return decode_loadstore_postindexing (regs->pc, dabt, instr); + }
Coding style: Please drop the {}.
xen/arch/arm/decode.c bad_thumb: · line 266
Quoted 9 lines
xen/arch/arm/decode.c +3
-0+/* TODO: Handle ARM instruction */ gprintk (XENLOG_ERR ,"unhandled ARM instruction\n" );return 1 ; } +#if CONFIG_ARM_64 +void post_increment_register (union ldr_str_instr_class *instr)
instr should not be modified, so please use const. Also, it would be preferrable to pass the regs in parameter. So the none of the decoding code relies on the current regs.
Furthermore, decode.c should only contain code to update the syndrome and in theory Arm could decide to provide an valid syndrome in future revision. So I would move this code in io.c (or maybe traps.c).
Quoted 45 lines
xen/arch/arm/decode.c +19
-0+{ +struct cpu_user_regs *regs =guest_cpu_user_regs (); +register_t val; + +/* handle when rn = SP */ +if ( instr->code.rn ==31 ) + val = regs->sp_el1; +else + val =get_user_reg (regs, instr->code.rn); + + val += instr->code.imm9; + +if ( instr->code.rn ==31 ) + regs->sp_el1 = val; +else +set_user_reg (regs, instr->code.rn, val); +} +#endif +/* * Local variables: * mode: C xen/arch/arm/decode.h +15
-0@@ -23,6 +23,35 @@#include <asm/regs.h> #include <asm/processor.h> +/* +* Refer to the ARMv8 ARM (DDI 0487G.b), Section C4.1.4 Loads and Stores +* Page 318 specifies the following bit pattern for +* "load/store register (immediate post-indexed)". +* +* 31 30 29 27 26 25 23 21 20 11 9 4 0 +* ___________________________________________________________________ +* |size|1 1 1 |V |0 0 |opc |0 | imm9 |0 1 | Rn | Rt | +* |____|______|__|____|____|__|_______________|____|_________|_______| +*/ +union ldr_str_instr_class { +uint32_t value; +struct ldr_str { +unsigned int rt:5 ;/* Rt register */ +unsigned int rn:5 ;/* Rn register */
xen/arch/arm/decode.h line 50
Quoted 10 lines
xen/arch/arm/decode.h +10
-0+ unsigned int fixed1:2; /* value == 01b */ + signed int imm9:9; /* imm9 */ + unsigned int fixed2:1; /* value == 0b */ + unsigned int opc:2; /* opc */ + unsigned int fixed3:2; /* value == 00b */ + unsigned int v:1; /* vector */ + unsigned int fixed4:3; /* value == 111b */ + unsigned int size:2; /* size */ + } code; +};
Looking at the code, post_increment_register() only care about 'rn' and 'imm9'. So rather than exposing the full instruction, could we instead provide the strict minimum? I.e something like:
struct
{
enum instr_type; /* Unknown, ldr/str post increment */
union
{
struct
{
register; /* Register to increment */
imm; /* Immediate to add */
} ldr_str;
}
uint64_t register;
}Quoted 8 lines
xen/arch/arm/decode.h +4
-0+ +#define POST_INDEX_FIXED_MASK 0x3B200C00 +#define POST_INDEX_FIXED_VALUE 0x38000400 +/** * Decode an instruction from pc * /!\ This function is not intended to fully decode an instruction. It
xen/arch/arm/decode.h line 72
Quoted 10 lines
xen/arch/arm/decode.h +5
-1@@ -35,8 +64,18 @@*/ int decode_instruction (const struct cpu_user_regs *regs, -struct hsr_dabt *dabt); +struct hsr_dabt *dabt, +union ldr_str_instr_class *instr); +/** +* Update the register value for Rn +* /!\ This function is used to update the register value for Rn when a
NIT: I would drop /!\ because this looks more the description of the function rather than a warning.
Quoted 17 lines
xen/arch/arm/decode.h +6
-0+* post indexing ldr/str instruction is decoded. +* +* This function will get: +* - The post indexing ldr/str instruction opcode +*/ +void post_increment_register (union ldr_str_instr_class *instr);#endif /* __ARCH_ARM_DECODE_H_ */ /* xen/arch/arm/io.c +0
-0@@ -106,14 +106,29 @@ enum io_state try_handle_mmio(struct cpu_user_regs *regs, .gpa = gpa, .dabt = dabt };
xen/arch/arm/io.c enum io_state try_handle_mmio(struct cpu_user_regs *regs, · line 118
Quoted 10 lines
xen/arch/arm/io.c +7
-0+int rc; +union ldr_str_instr_class instr = {0 };ASSERT (hsr.ec ==HSR_EC_DATA_ABORT_LOWER_EL ); +/* +* Armv8 processor does not provide a valid syndrome for post-indexing +* ldr/str instructions. So in order to process these instructions, +* Xen must decode them. +*/
This sort of comments will become stall if we decide to add more decoding. So I would keep the comments in io.c generic (i.e. no mention of load/store).
xen/arch/arm/io.c enum io_state try_handle_mmio(struct cpu_user_regs *regs, · line 119
Quoted 1 line
xen/arch/arm/io.c +1
-0+if ( !info.dabt.valid )
I would rather prefer if we keep using dabt.valid here rather than info.dabt.valid. It is shorter and keep consistent with how it was checked before.
Quoted 18 lines
xen/arch/arm/io.c +9
-2+ { + rc =decode_instruction (regs, &info.dabt, &instr); +if ( rc ) + { +gprintk (XENLOG_DEBUG ,"Unable to decode instruction\n" ); +return IO_ABORT ; + } + } + handler =find_mmio_handler (v->domain, info.gpa);if ( !handler ) { -int rc; - rc =try_fwd_ioserv (regs, v, &info);if ( rc ==IO_HANDLED )return handle_ioserv (regs, v);
xen/arch/arm/io.c enum io_state try_handle_mmio(struct cpu_user_regs *regs, · line 127
Quoted 7 lines
xen/arch/arm/io.c +0
-4@@ -121,10 +136,6 @@ enum io_state try_handle_mmio(struct cpu_user_regs *regs,return rc; } -/* All the instructions used on emulated MMIO region should be valid */ -if ( !dabt.valid ) -return IO_ABORT ; -
I think moving if ( !dabt.valid ) earlier should be part of a pre-patch. This would allows us to backport it as we don't want to forward the I/O to an IOREQ server if ISV=0.
xen/arch/arm/io.c enum io_state try_handle_mmio(struct cpu_user_regs *regs, · line 148
Quoted 9 lines
xen/arch/arm/io.c +1
-1/* * Erratum 766422: Thumb store translation fault to Hypervisor may * not have correct HSR Rt value. @@ -134,7 +145,7 @@ enum io_state try_handle_mmio(struct cpu_user_regs *regs, {int rc; - rc =decode_instruction (regs, &info.dabt); + rc =decode_instruction (regs, &info.dabt,NULL );
Could we combine the two decode_instruction()?
Quoted 4 lines
xen/arch/arm/io.c +0
-0if ( rc ) {gprintk (XENLOG_DEBUG ,"Unable to decode instruction\n" );
xen/arch/arm/io.c enum io_state try_handle_mmio(struct cpu_user_regs *regs, · line 161
Quoted 10 lines
xen/arch/arm/io.c +4
-2@@ -143,9 +154,21 @@ enum io_state try_handle_mmio(struct cpu_user_regs *regs, }if ( info.dabt.write ) -return handle_write (handler, v, &info); + rc =handle_write (handler, v, &info);else -return handle_read (handler, v, &info); + rc =handle_read (handler, v, &info); + +#if CONFIG_ARM_64
Rather than using #ifdef here, I prefer if provide a stub for post_increment_register() that contains ASSERT_UNREACHABLE(). So the code in io.c is more arch-agnostic.
xen/arch/arm/io.c enum io_state try_handle_mmio(struct cpu_user_regs *regs, · line 162
Quoted 1 line
xen/arch/arm/io.c +1
-0+if ( (is_64bit_domain (current->domain) && !psr_mode_is_32bit (regs)) )
This is a fairly expensive check. Can we avoid it and instead rely on the instruction to be decoded?
xen/arch/arm/io.c enum io_state try_handle_mmio(struct cpu_user_regs *regs, · line 164
Quoted 2 lines
xen/arch/arm/io.c +2
-0+ { +if ( instr.value !=0 )
I would prefer if we carry a boolean to indicate whether we manually decoded the instruction. The main advantage is one doesn't need to check in the Arm Arm to figure out that the 0x0 will never result to a valid instruction (it is thankfully used for UDF).
xen/arch/arm/io.c enum io_state try_handle_mmio(struct cpu_user_regs *regs, · line 174
Quoted 10 lines
xen/arch/arm/io.c +7
-0+ { +post_increment_register (&instr); + } + } +#endif + +return rc; } void register_mmio_handler(struct domain *d,
Cheers,
Signature · 1 line
Julien Grall
Quoted 12 lines · Julien Grall
xen/arch/arm/decode.c bad_thumb: · line 266
Quoted 7 lines
xen/arch/arm/decode.c +2
-0+/* TODO: Handle ARM instruction */ gprintk (XENLOG_ERR ,"unhandled ARM instruction\n" );return 1 ; } +#if CONFIG_ARM_64 +void post_increment_register (union ldr_str_instr_class *instr)instr should not be modified, so please use const. Also, it would be preferrable to pass the regs in parameter. So the none of the decoding code relies on the current regs.
Quoted 3 lines
Furthermore,
decode.cshould only contain code to update the syndrome and in theory Arm could decide to provide an valid syndrome in future revision. So I would move this code inio.c(or maybetraps.c).
I was the one to suggest moving it to decode.c to keep it closer to the decoding function it is related to, and also because it felt a bit out of place in io.c.
I don't feel strongly about this at all; I am fine either way.
Quoted 60 lines
Quoted 44 lines
xen/arch/arm/decode.c +19
-0+{ +struct cpu_user_regs *regs =guest_cpu_user_regs (); +register_t val; + +/* handle when rn = SP */ +if ( instr->code.rn ==31 ) + val = regs->sp_el1; +else + val =get_user_reg (regs, instr->code.rn); + + val += instr->code.imm9; + +if ( instr->code.rn ==31 ) + regs->sp_el1 = val; +else +set_user_reg (regs, instr->code.rn, val); +} +#endif +/* * Local variables: * mode: C xen/arch/arm/decode.h +14
-0@@ -23,6 +23,35 @@#include <asm/regs.h> #include <asm/processor.h> +/* +* Refer to the ARMv8 ARM (DDI 0487G.b), Section C4.1.4 Loads and Stores +* Page 318 specifies the following bit pattern for +* "load/store register (immediate post-indexed)". +* +* 31 30 29 27 26 25 23 21 20 11 9 4 0 +* ___________________________________________________________________ +* |size|1 1 1 |V |0 0 |opc |0 | imm9 |0 1 | Rn | Rt | +* |____|______|__|____|____|__|_______________|____|_________|_______| +*/ +union ldr_str_instr_class { + uint32_t value; + struct ldr_str { + unsigned int rt:5; /* Rt register */ + unsigned int rn:5; /* Rn register */xen/arch/arm/decode.h line 49
Quoted 10 lines
xen/arch/arm/decode.h +10
-0+ unsigned int fixed1:2; /* value == 01b */ + signed int imm9:9; /* imm9 */ + unsigned int fixed2:1; /* value == 0b */ + unsigned int opc:2; /* opc */ + unsigned int fixed3:2; /* value == 00b */ + unsigned int v:1; /* vector */ + unsigned int fixed4:3; /* value == 111b */ + unsigned int size:2; /* size */ + } code; +};Looking at the code,
post_increment_register()only care about 'rn' and 'imm9'. So rather than exposing the full instruction, could we instead provide the strict minimum? I.e something like:struct
Quoted 12 lines
{
enum instr_type; /* Unknown, ldr/str post increment */
union
{
struct
{
register; /* Register to increment */
imm; /* Immediate to add */
} ldr_str;
}
uint64_t register;
}The full description helped a lot during review. I would prefer to keep it if you don't feel strongly about it.
Hi,
Quoted 13 lines · Stefano Stabellini
Quoted 12 lines · Julien Grall
xen/arch/arm/decode.c bad_thumb: · line 266
Quoted 7 lines
xen/arch/arm/decode.c +2
-0+/* TODO: Handle ARM instruction */ gprintk (XENLOG_ERR ,"unhandled ARM instruction\n" );return 1 ; } +#if CONFIG_ARM_64 +void post_increment_register (union ldr_str_instr_class *instr)instr should not be modified, so please use const. Also, it would be preferrable to pass the regs in parameter. So the none of the decoding code relies on the current regs.
Quoted 7 lines
Quoted 3 lines
Furthermore,
decode.cshould only contain code to update the syndrome and in theory Arm could decide to provide an valid syndrome in future revision. So I would move this code inio.c(or maybetraps.c).I was the one to suggest moving it to
decode.cto keep it closer to the decoding function it is related to, and also because it felt a bit out of place inio.c.
How about traps.c? This is where we also take care of incrementing pc after we handle a MMIO trap.
Quoted 34 lines
Quoted 34 lines
Quoted 34 lines
xen/arch/arm/decode.c +19
-0+{ +struct cpu_user_regs *regs =guest_cpu_user_regs (); +register_t val; + +/* handle when rn = SP */ +if ( instr->code.rn ==31 ) + val = regs->sp_el1; +else + val =get_user_reg (regs, instr->code.rn); + + val += instr->code.imm9; + +if ( instr->code.rn ==31 ) + regs->sp_el1 = val; +else +set_user_reg (regs, instr->code.rn, val); +} +#endif +/* * Local variables: * mode: C xen/arch/arm/decode.h +4
-0@@ -23,6 +23,35 @@#include <asm/regs.h> #include <asm/processor.h> +/* +* Refer to the ARMv8 ARM (DDI 0487G.b), Section C4.1.4 Loads and Stores +* Page 318 specifies the following bit pattern for +* "load/store register (immediate post-indexed)". +*
Quoted 8 lines
Quoted 8 lines
xen/arch/arm/decode.h line 38
Quoted 8 lines
xen/arch/arm/decode.h +8
-0+* 31 30 29 27 26 25 23 21 20 11 9 4 0 +* ___________________________________________________________________ +* |size|1 1 1 |V |0 0 |opc |0 | imm9 |0 1 | Rn | Rt | +* |____|______|__|____|____|__|_______________|____|_________|_______| +*/ +union ldr_str_instr_class { + uint32_t value; + struct ldr_str {
No need to name the struct here.
Quoted 11 lines
Quoted 11 lines
xen/arch/arm/decode.h line 49
Quoted 11 lines
xen/arch/arm/decode.h +11
-0+ unsigned int rt:5; /* Rt register */ + unsigned int rn:5; /* Rn register */ + unsigned int fixed1:2; /* value == 01b */ + signed int imm9:9; /* imm9 */ + unsigned int fixed2:1; /* value == 0b */ + unsigned int opc:2; /* opc */ + unsigned int fixed3:2; /* value == 00b */ + unsigned int v:1; /* vector */ + unsigned int fixed4:3; /* value == 111b */ + unsigned int size:2; /* size */ + } code;
It would be best to name it ldr_str so this can be easily extended (e.g. no renaming) for other instructions in the future.
Quoted 20 lines
Quoted 7 lines
xen/arch/arm/decode.h line 50
Quoted 1 line
xen/arch/arm/decode.h +1
-0+};Looking at the code,
post_increment_register()only care about 'rn' and 'imm9'. So rather than exposing the full instruction, could we instead provide the strict minimum? I.e something like:struct
Quoted 12 lines
{ enum instr_type; /* Unknown, ldr/str post increment */ union { struct { register; /* Register to increment */ imm; /* Immediate to add */ } ldr_str; } uint64_t register; }
Quoted 2 lines
The full description helped a lot during review. I would prefer to keep it if you don't feel strongly about it.
I haven't suggested to drop the union. Instead, I am suggesting to keep it internally to decode.c and expose something different to the external the user. The idea is the caller doesn't care about the full instruction, it only cares about what action to do.
Basically, what I am asking is an augmented dabt. So all the information are in one place rather than having to carry two structure (struct hsr_dabt and union ldr_str_instr_class) which contain mostly redundant information.
Cheers,
Signature · 1 line
Julien Grall
Quoted 112 lines · Julien Grall
Quoted 20 lines · Stefano Stabellini
Quoted 13 lines · Julien Grall
xen/arch/arm/decode.c bad_thumb: · line 266
Quoted 7 lines
xen/arch/arm/decode.c +2
-0+/* TODO: Handle ARM instruction */ gprintk (XENLOG_ERR ,"unhandled ARM instruction\n" );return 1 ; } +#if CONFIG_ARM_64 +void post_increment_register (union ldr_str_instr_class *instr)instr should not be modified, so please use const. Also, it would be preferrable to pass the regs in parameter. So the none of the decoding code
relies on the current regs.Quoted 5 lines
Furthermore,
decode.cshould only contain code to update the syndrome and in
theory Arm could decide to provide an valid syndrome in future revision. So I
would move this code inio.c(or maybetraps.c).Quoted 3 lines
I was the one to suggest moving it to
decode.cto keep it closer to the decoding function it is related to, and also because it felt a bit out of place inio.c.How about
traps.c? This is where we also take care of incrementing pc after we handle a MMIO trap.Quoted 35 lines
Quoted 35 lines
Quoted 35 lines
xen/arch/arm/decode.c +19
-0+{ +struct cpu_user_regs *regs =guest_cpu_user_regs (); +register_t val; + +/* handle when rn = SP */ +if ( instr->code.rn ==31 ) + val = regs->sp_el1; +else + val =get_user_reg (regs, instr->code.rn); + + val += instr->code.imm9; + +if ( instr->code.rn ==31 ) + regs->sp_el1 = val; +else +set_user_reg (regs, instr->code.rn, val); +} +#endif +/* * Local variables: * mode: C xen/arch/arm/decode.h +1
-0@@ -23,6 +23,35 @@#include <asm/regs.h> #include <asm/processor.h> +/* +* Refer to the ARMv8 ARM (DDI 0487G.b), Section C4.1.4 Loads and Stores
+ * Page 318 specifies the following bit pattern for
+ * "load/store register (immediate post-indexed)".
+ *Quoted 8 lines
Quoted 8 lines
xen/arch/arm/decode.h line 38
Quoted 8 lines
+ * 31 30 29 27 26 25 23 21 20 11 9 4 0
+ * ___________________________________________________________________+ * |size|1 1 1 |V |0 0 |opc |0 | imm9 |0 1 | Rn | Rt | + * |____|______|__|____|____|__|_______________|____|_________|_______|+ */
xen/arch/arm/decode.h +3
-0+union ldr_str_instr_class { + uint32_t value; + struct ldr_str {No need to name the struct here.
Quoted 11 lines
Quoted 11 lines
xen/arch/arm/decode.h line 49
Quoted 11 lines
xen/arch/arm/decode.h +11
-0+ unsigned int rt:5; /* Rt register */ + unsigned int rn:5; /* Rn register */ + unsigned int fixed1:2; /* value == 01b */ + signed int imm9:9; /* imm9 */ + unsigned int fixed2:1; /* value == 0b */ + unsigned int opc:2; /* opc */ + unsigned int fixed3:2; /* value == 00b */ + unsigned int v:1; /* vector */ + unsigned int fixed4:3; /* value == 111b */ + unsigned int size:2; /* size */ + } code;It would be best to name it
ldr_strso this can be easily extended (e.g. no renaming) for other instructions in the future.Quoted 20 lines
Quoted 8 lines
Quoted 1 line
+};
Looking at the code,
post_increment_register()only care about 'rn' and 'imm9'. So rather than exposing the full instruction, could we instead provide
the strict minimum? I.e something like:struct
Quoted 12 lines
{ enum instr_type; /* Unknown, ldr/str post increment */ union { struct { register; /* Register to increment */ imm; /* Immediate to add */ } ldr_str; } uint64_t register; }Quoted 2 lines
The full description helped a lot during review. I would prefer to keep
it if you don't feel strongly about it.
Quoted 8 lines
I haven't suggested to drop the union. Instead, I am suggesting to keep it internally to
decode.cand expose something different to the external the user. The idea is the caller doesn't care about the full instruction, it only cares about what action to do.Basically, what I am asking is an augmented dabt. So all the information are in one place rather than having to carry two structure (struct
hsr_dabtand unionldr_str_instr_class) which contain mostly redundant information.
That could be a good idea. We shouldn't need "union ldr_str_instr_class" in io.c, it should only be needed in decode.c. Thus, it could be internal to decode.c. That's fine by me.
Hi Julien/Stefano,
Thanks for your feedback. The comments are useful.
I need a couple clarifications and then I can send the pre-patch and v5 (with the fixes suggested).
Quoted 154 lines · Julien Grall
Hi,
Quoted 76 lines · Ayan Kumar Halder
At the moment, Xen is only handling data abort with valid syndrome (i.e. ISV=0). Unfortunately, this doesn't cover all the instructions a domain could use to access MMIO regions.
For instance, a baremetal OS can use any of the following instructions, where x1 contains the address of the MMIO region:
1. ldr x2, [x1], #8
2. ldr w2, [x1], #-4
3. ldr x2, [x1], #-8
4. ldr w2, [x1], #4
5. ldrh w2, [x1], #2
6. ldrb w2, [x1], #1
7. str x2, [x1], #8
8. str w2, [x1], #-4
9. strh w2, [x1], #2
10. strb w2, [x1], #1In the following two instructions, Rn could theoretically be stack pointer which might contain the address of the MMIO region:-
11. ldrb w2, [Rn], #1
12. ldrb wzr, [Rn], #1In order to handle post-indexing store/load instructions (like those mentioned above), Xen will need to fetch and decode the instruction.
This patch only cover post-index store/load instructions from AArch64 mode. For now, this is left unimplemented for trap from AArch32 mode.
Signed-off-by Ayan Kumar Halder <[email protected]>---
Changelog :-
v2 - 1. Updated the rn register after reading from it. (Pointed by Julien, Stefano)
2. Used a union to represent the instruction opcode (Suggestd by Bertrand)
3. Fixed coding style issues (Pointed by Julien)
4. In the previous patch, I was updatingdabt->signbased on the signedness of imm9. This was incorrect. As mentioned in ARMv8 ARM DDI 0487G.b, Page 3221, SSE indicates the signedness of the data item loaded. In our case, the data item loaded is always unsigned.v3- 1. Handled all the variants of ldr/str (ie 64, 32, 16, 8 bit variants). Thus, I have removed the check for "
instr->code.opc== 0" (Suggested by Andre)
2. Handled the scenario when rn = SP, rt = XZR (Suggested by Jan, Andre)
3. Added restriction for "rt != rn" (Suggested by Andre)
4. Moved unionldr_str_instr_class{} todecode.h. This is the header included byio.canddecode.c(where the union is referred). (Suggested by Jan)
5. Indentation and typo fixes (Suggested by Jan)v4- 1. Fixed the patch as per Stefano's comments on v3. They are as follows :- 1.1 Use macros to determine the fixed values in the instruction opcode 1.2 Checked if instr != NULL
1.3 Changed some data types and added #defineARM_64for AArch64 specific code
1.4 Movedpost_increment_register()todecode.cso that the decoding logic is confined to a single file.
1.5 Moved some checks frompost_increment_register()todecode_loadstore_postindexing()
1.6 Removed a duplicate check
2. Updated the commit message as per Andre's comments.
3. Changed the names of a label and some comments. *32bit* was erroneously mentioned in a label and comments indecode_loadstore_postindexing()although the function handled all variants of ldr/str post indexing.
xen/arch/arm/decode.c| 124 +++++++++++++++++++++++++++++++++++++++++-xen/arch/arm/decode.h| 41 +++++++++++++- xen/arch/arm/io.c | 41 +++++++++++---3 files changed, 195 insertions(+), 11 deletions(-)xen/arch/arm/decode.c +0
-0xen/arch/arm/decode.c bad_thumb2: · line 86
Quoted 3 lines
xen/arch/arm/decode.c +0
-0@@ -84,6 +84,101 @@ bad_thumb2: return 1; } +static int decode_loadstore_postindexing(register_t pc,This is only handling AArch64 instruction. So please add aarch64 (or arm64) in the name.
xen/arch/arm/decode.c bad_thumb2: · line 93
Quoted 7 lines
xen/arch/arm/decode.c +6
-0+ struct hsr_dabt *dabt, + union ldr_str_instr_class *instr) +{ + struct cpu_user_regs *regs = guest_cpu_user_regs(); + + if ( instr == NULL )Wouldn't it be a programming error? If so, should it be ASSERT(...)?
Quoted 7 lines
xen/arch/arm/decode.c +6
-0+ { + gprintk(XENLOG_ERR, "instr should not be NULL\n"); + return -EINVAL; + } + + if ( raw_copy_from_guest(&instr->value, (void * __user)pc,sizeof (instr)) )xen/arch/arm/decode.c bad_thumb2: · line 108
Quoted 10 lines
xen/arch/arm/decode.c +9
-0+ { + gprintk(XENLOG_ERR, "Could not copy the instruction from PC\n"); + return -EFAULT; + } + + /* +* Rn -ne Rt for ldr/str instruction. +* Check https://developer.arm.com/documentation/dui0802/a/CIHGJHED +* (Register restrictions) I find a bit odd that you are pointing to 3 different spec (Compiler, Cortex-A, Arm Arm). Can we please use only the Arm Arm? It should contain everything we need...
Quoted 7 lines
xen/arch/arm/decode.c +2
-0+ * + * The only exception for this is when rn = 31. It denotes SP("Use of SP")
+ *
+ * And when rt = 31, it denotes wzr/xzr. (Refer + *
https://developer.arm.com/documentation/den0024/a/ARMv8-Registers/AArch64-special-registersSame here.
Also, please avoid URL and use the document reference (e.g. ARM DDI
0487F.cfor the Arm Arm) are they are easy to find on google.Quoted 13 lines
+ * "There is no register called X31 or W31. Many instructions are encoded
+ * such that the number 31 represents the zero register, ZR (WZR/XZR)."
+ */
+ if ( (instr->code.rn==instr->code.rt) && (instr->code.rn!= 31) ) + {
+gprintk(XENLOG_ERR, "Rn should not be equal to Rt except for r31\n");
+ return-EINVAL;
+ }
+
+ /* First, let's check for the fixed values */Quoted 8 lines
+ if ( (
instr->value&POST_INDEX_FIXED_MASK) !=POST_INDEX_FIXED_VALUE)
+ {
+gprintk(XENLOG_ERR, "Cannot decode instruction 0x%x",instr->value);
+ gprintk(XENLOG_ERR, "Decoding not supported for instructions other than"
+ " ldr/str post indexing\n");Please don't split the message. Instead, it should be:
gprintk(XENLOG_ERR,
"...");
Quoted 7 lines
But I would combine the two messages and simply write:
"Decoding instruction 0x%x is not supported". Not need to say that we support only ldr/str post indexing.
Quoted 1 line
+ goto
bad_loadstore;I am a bit confused why some of the error path is using error and other goto. Can you clarify it?
Sorry, this is my carelessness. I was thinking to return an error (immediately) for issues un-related to decoding (For eg instr == NULL, copy_from_guest()). But on re-thinking, it does not sound sane. I will use goto for all the errors as it is important to display the error message for the user.
Quoted 12 lines
Quoted 11 lines
+ }
+
+ /*
+ * Handle when rn = SP
+ * Refer ArmV8 ARM DDI 0487G.b, Page - D1-2463 "Stack pointer register selection"
+ * As we are interested in handling exceptions only from EL1 in AArch64 state,
+ * thus M[3:0] == EL1h (Page - C5-480 "When exception taken from AArch64 state:")
Quoted 1 line
I read the last sentence as "We only support decoding from instruction run at EL1". But I can't find a check guarantee that.
Sorry, the check below does that but is used only for rn == 31. I should move ((regs->cpsr & PSR_MODE_MASK) != PSR_MODE_EL1h) ) into a separate check of its own.
Quoted 67 lines
Quoted 14 lines
+ */
+ if ( (instr->code.rn== 31) && ((regs->cpsr&PSR_MODE_MASK) !=PSR_MODE_EL1h) )
+ {
+gprintk(XENLOG_ERR, "SP is valid only for EL1h\n"); + gotobad_loadstore;
+ }
+
+ if (instr->code.v!= 0 )
+ {
+ gprintk(XENLOG_ERR,
+ "ldr/str post indexing for vector types are not supported\n");Quoted 8 lines
+ goto
bad_loadstore;
+ }
+
+ /* Check for STR (immediate) */
+ if (instr->code.opc== 0 )
+ {
+dabt->write= 1;
+ }Coding style: We don't use {} for single line. In this case, it would also result to have a more readable code.
Quoted 5 lines
+ /* Check for LDR (immediate) */
+ else if (instr->code.opc== 1 )
+ {
+dabt->write= 0;
+ }Same.
Quoted 5 lines
+ else
+ {
+ gprintk(XENLOG_ERR,
+ "Decoding ldr/str post indexing is not supported for this variant\n");The indentation looks wrong here.
Quoted 7 lines
+ goto
bad_loadstore;
+ }
+
+ gprintk(XENLOG_INFO,
+ "instr->code.rt= 0x%x,instr->code.size= 0x%x,instr->code.imm9= %d\n",
+instr->code.rt,instr->code.size,instr->code.imm9);The indentation looks wrong here.
Quoted 16 lines
xen/arch/arm/decode.c +8
-0+ + update_dabt(dabt, instr->code.rt, instr->code.size, false); + dabt->valid = 1; + + return 0; + + bad_loadstore: + gprintk(XENLOG_ERR, "unhandled Arm instruction 0x%x\n",
instr->value);
+ return 1;xen/arch/arm/decode.c +2
-0+} +static int
decode_thumb(register_t pc, struct hsr_dabt *dabt){
uint16_tinstr;xen/arch/arm/decode.c +0
-0@@ -150,17 +245,44 @@ bad_thumb:
Quoted 8 lines
xen/arch/arm/decode.c bad_thumb2: · line 89
Quoted 6 lines
xen/arch/arm/decode.c +2
-0return 1; } -int decode_instruction(const struct cpu_user_regs *regs, struct hsr_dabt *dabt) +int decode_instruction(const struct cpu_user_regs *regs, structhsr_dabt *dabt, + union ldr_str_instr_class *instr)I would like to avoid make the assumption that the instr we decode will always be a store/load. So please rename it to something more generic.
A difference of thought. Should we not name it as per the current usage ? This will avoid any ambiguity. Later, if this gets extended, then it can be named more appropriately depending on the usage.
Also, the bit-pattern in "union ldr_str_instr_class" is very much specific to ldr/str. So changing the name to something generic seems incorrect imo.
Quoted 24 lines
xen/arch/arm/decode.c bad_thumb:
Quoted 5 lines
xen/arch/arm/decode.c +0
-0{ if ( is_32bit_domain(current->domain) && regs->cpsr & PSR_THUMB ) return decode_thumb(regs->pc, dabt); + if ( (is_64bit_domain(current->domain) && !psr_mode_is_32bit(regs)) )The first part could be dropped because if
psr_mode_is_32bitreturns 0 then it must mean the domain is 64-bit.xen/arch/arm/decode.c bad_thumb: · line 257
Quoted 3 lines
xen/arch/arm/decode.c +3
-0+ { + return decode_loadstore_postindexing(regs->pc, dabt, instr); + }Coding style: Please drop the {}.
Quoted 7 lines
xen/arch/arm/decode.c +1
-0+ /* TODO: Handle ARM instruction */ gprintk(XENLOG_ERR, "unhandled ARM instruction\n"); return 1; }+#if
CONFIG_ARM_64
+voidpost_increment_register(union ldr_str_instr_class *instr)instr should not be modified, so please use const. Also, it would be preferrable to pass the regs in parameter. So the none of the decoding code relies on the current regs.
Quoted 1 line
Furthermore,
decode.cshould only contain code to update the syndrome and in theory Arm could decide to provide an valid syndrome in future revision. So I would move this code inio.c(or maybetraps.c).
@Stefano/Julien - Can we all agree on traps.c ?
Quoted 112 lines
Quoted 46 lines
xen/arch/arm/decode.c +19
-0+{ + struct cpu_user_regs *regs = guest_cpu_user_regs(); + register_t val; + + /* handle when rn = SP */ + if ( instr->code.rn == 31 ) + val = regs->sp_el1; + else + val = get_user_reg(regs, instr->code.rn); + + val += instr->code.imm9; + + if ( instr->code.rn == 31 ) + regs->sp_el1 = val; + else + set_user_reg(regs, instr->code.rn, val); +} +#endif +/*
* Local variables:
* mode: Cxen/arch/arm/decode.h +0
-0@@ -23,6 +23,35 @@ #include <asm/regs.h> #include <asm/processor.h>+/*
+ * Refer to the ARMv8 ARM (DDI 0487G.b), Section C4.1.4 Loads and Stores
+ * Page 318 specifies the following bit pattern for
+ * "load/store register (immediate post-indexed)".
+ *
+ * 31 30 29 27 26 25 23 21 20 11 9 4 0
+ * ___________________________________________________________________+ * |size|1 1 1 |V |0 0 |opc |0 | imm9 |0 1 | Rn | Rt | + * |____|______|__|____|____|__|_______________|____|_________|_______|+ */
xen/arch/arm/decode.h +5
-0+union ldr_str_instr_class { + uint32_t value; + struct ldr_str { + unsigned int rt:5; /* Rt register */ + unsigned int rn:5; /* Rn register */xen/arch/arm/decode.h line 50
Quoted 10 lines
xen/arch/arm/decode.h +10
-0+ unsigned int fixed1:2; /* value == 01b */ + signed int imm9:9; /* imm9 */ + unsigned int fixed2:1; /* value == 0b */ + unsigned int opc:2; /* opc */ + unsigned int fixed3:2; /* value == 00b */ + unsigned int v:1; /* vector */ + unsigned int fixed4:3; /* value == 111b */ + unsigned int size:2; /* size */ + } code; +};Looking at the code,
post_increment_register()only care about 'rn' and 'imm9'. So rather than exposing the full instruction, could we instead provide the strict minimum? I.e something like:struct
{
enuminstr_type; /* Unknown, ldr/str post increment */ union
{
struct
{
register; /* Register to increment */ imm; /* Immediate to add */
}ldr_str;
}
uint64_tregister;
}Quoted 13 lines
xen/arch/arm/decode.h +4
-0+ +#define POST_INDEX_FIXED_MASK 0x3B200C00 +#define POST_INDEX_FIXED_VALUE 0x38000400 +/**
* Decode an instruction from pc
* /!\ This function is not intended to fully decode an instruction. Itxen/arch/arm/decode.h +2
-1@@ -35,8 +64,18 @@*/ int decode_instruction(const struct cpu_user_regs *regs, - struct hsr_dabt *dabt); + struct hsr_dabt *dabt, + union ldr_str_instr_class *instr);Quoted 3 lines
+/**
+ * Update the register value for Rn
+ * /!\ This function is used to update the register value for Rn when aNIT: I would drop /!\ because this looks more the description of the function rather than a warning.
Quoted 20 lines
+ * post indexing ldr/str instruction is decoded.
+ *
+ * This function will get:
+ * - The post indexing ldr/str instruction opcode
+ */
+voidpost_increment_register(union ldr_str_instr_class *instr); #endif /*__ARCH_ARM_DECODE_H_*/
/*xen/arch/arm/io.c +0
-0@@ -106,14 +106,29 @@ enum io_state try_handle_mmio(structcpu_user_regs *regs, .gpa = gpa,.dabt = dabt
};
+ int rc;
+ unionldr_str_instr_classinstr = {0};ASSERT(hsr.ec == HSR_EC_DATA_ABORT_LOWER_EL);
Quoted 8 lines
Quoted 6 lines
+ /*
+ * Armv8 processor does not provide a valid syndrome for post-indexing
+ * ldr/str instructions. So in order to process these instructions, + * Xen must decode them.
+ */This sort of comments will become stall if we decide to add more decoding. So I would keep the comments in
io.cgeneric (i.e. no mention of load/store).
Yes, I can remove ldr/str from comments
Quoted 24 lines
Quoted 2 lines
+ if ( !info.dabt.valid )
I would rather prefer if we keep using dabt.valid here rather than info.dabt.valid. It is shorter and keep consistent with how it was checked before.
Quoted 19 lines
+ {
+ rc =decode_instruction(regs, &info.dabt, &instr); + if ( rc )
+ {
+gprintk(XENLOG_DEBUG, "Unable to decode instruction\n"); + returnIO_ABORT;
+ }
+ }
+
handler =find_mmio_handler(v->domain, info.gpa);
if ( !handler )
{
- int rc;
-
rc =try_fwd_ioserv(regs, v, &info);
if ( rc ==IO_HANDLED)
returnhandle_ioserv(regs, v);xen/arch/arm/io.c +0
-0@@ -121,10 +136,6 @@ enum io_state try_handle_mmio(struct cpu_user_regs *regs,
Quoted 8 lines
Quoted 6 lines
xen/arch/arm/io.c +0
-0return rc; }- /* All the instructions used on emulated MMIO region should be valid */ - if ( !dabt.valid )
- returnIO_ABORT;
-I think moving if ( !dabt.valid ) earlier should be part of a pre-patch. This would allows us to backport it as we don't want to forward the I/O to an IOREQ server if ISV=0.
I would say that in the pre-patch, we should move "if ( !dabt.valid )" before "find_mmio_handler()". The reason being if the intruction was not decoded successfully (ie ISV=0), then there is no need to find the mmio handler corresponding to the gpa. Please let me know your thoughts and I can send the pre-patch.
Quoted 12 lines
xen/arch/arm/io.c enum io_state try_handle_mmio(struct · line 149
Quoted 10 lines
/*
* Erratum 766422: Thumb store translation fault to Hypervisor may
* not have correct HSR Rt value.xen/arch/arm/io.c +1
-0@@ -134,7 +145,7 @@ enum io_state try_handle_mmio(structcpu_user_regs *regs, { int rc; - rc = decode_instruction(regs, &info.dabt); + rc = decode_instruction(regs, &info.dabt, NULL);Could we combine the two
decode_instruction()?
Do you mean something like this :-
if ( (!info.dabt.valid ) || (( check_workaround_766422() && (regs->cpsr & PSR_THUMB) && dabt.write) )
{
rc = decode_instruction(regs, &info.dabt, &instr); // We know that for PSR_THUMB, instr is ignored. if ( rc )
{
gprintk(XENLOG_DEBUG, "Unable to decode instruction\n");
return IO_ABORT;
}
}
Quoted 17 lines
Quoted 13 lines
xen/arch/arm/io.c +0
-0if ( rc ) {
gprintk(XENLOG_DEBUG, "Unable to decode instruction\n");xen/arch/arm/io.c +1
-1@@ -143,9 +154,21 @@ enum io_state try_handle_mmio(structcpu_user_regs *regs, } if ( info.dabt.write ) - return handle_write(handler, v, &info); + rc = handle_write(handler, v, &info);else
- returnhandle_read(handler, v, &info);
+ rc =handle_read(handler, v, &info);xen/arch/arm/io.c
Quoted 2 lines
xen/arch/arm/io.c +2
-0+ +#if CONFIG_ARM_64 Rather than using #ifdef here, I prefer if provide a stub for
post_increment_register()that containsASSERT_UNREACHABLE(). So the code inio.cis more arch-agnostic.
So you mean something like this (in traps.c):-
#if CONFIG_ARM_64
void post_increment_register(union ldr_str_instr_class *instr)
{
// handle the post increment
}
#else
void post_increment_register(union ldr_str_instr_class *instr)
{
ASSERT_UNREACHABLE();
}
#endif
If so, I am fine with this.
Quoted 5 lines
Quoted 3 lines
+ if ( (
is_64bit_domain(current->domain)&&
!psr_mode_is_32bit(regs)) )This is a fairly expensive check. Can we avoid it and instead rely on the instruction to be decoded?
yes, as this has already been checked in decode_instruction(), so we can just rely on instr.
- Ayan
Quoted 18 lines
Quoted 3 lines
+ {
+ if ( instr.value != 0 )I would prefer if we carry a boolean to indicate whether we manually decoded the instruction. The main advantage is one doesn't need to check in the Arm Arm to figure out that the
0x0will never result to a valid instruction (it is thankfully used for UDF).Quoted 9 lines
+ {
+post_increment_register(&instr);
+ }
+ }xen/arch/arm/io.c +3
-0+#endif + + return rc;}
void register_mmio_handler(struct domain *d,Cheers,
Quoted 1 line · Ayan Kumar Halder
Hi Julien/Stefano,
Hi,
Quoted 12 lines · Julien Grall
Quoted 11 lines
Quoted 10 lines
+ }
+
+ /*
+ * Handle when rn = SP
+ * Refer ArmV8 ARM DDI 0487G.b, Page - D1-2463 "Stack pointer register selection"
+ * As we are interested in handling exceptions only from EL1 in AArch64 state,
+ * thus M[3:0] == EL1h (Page - C5-480 "When exception taken from AArch64 state:")
Quoted 2 lines
Quoted 1 line
I read the last sentence as "We only support decoding from instruction run at EL1". But I can't find a check guarantee that.
Sorry, the check below does that but is used only for rn == 31. I should move ((
regs->cpsr&PSR_MODE_MASK) !=PSR_MODE_EL1h) ) into a separate check of its own.
The question is why do we want to limit instruction decoding to EL1?
Quoted 76 lines
Quoted 67 lines
Quoted 14 lines
+ */
+ if ( (instr->code.rn== 31) && ((regs->cpsr&PSR_MODE_MASK) !=PSR_MODE_EL1h) )
+ {
+gprintk(XENLOG_ERR, "SP is valid only for EL1h\n"); + gotobad_loadstore;
+ }
+
+ if (instr->code.v!= 0 )
+ {
+ gprintk(XENLOG_ERR,
+ "ldr/str post indexing for vector types are not supported\n");Quoted 8 lines
+ goto
bad_loadstore;
+ }
+
+ /* Check for STR (immediate) */
+ if (instr->code.opc== 0 )
+ {
+dabt->write= 1;
+ }Coding style: We don't use {} for single line. In this case, it would also result to have a more readable code.
Quoted 5 lines
+ /* Check for LDR (immediate) */
+ else if (instr->code.opc== 1 )
+ {
+dabt->write= 0;
+ }Same.
Quoted 5 lines
+ else
+ {
+ gprintk(XENLOG_ERR,
+ "Decoding ldr/str post indexing is not supported for this variant\n");The indentation looks wrong here.
Quoted 7 lines
+ goto
bad_loadstore;
+ }
+
+ gprintk(XENLOG_INFO,
+ "instr->code.rt= 0x%x,instr->code.size= 0x%x,instr->code.imm9= %d\n",
+instr->code.rt,instr->code.size,instr->code.imm9);The indentation looks wrong here.
Quoted 16 lines
xen/arch/arm/decode.c +8
-0+ + update_dabt(dabt, instr->code.rt, instr->code.size, false); + dabt->valid = 1; + + return 0; + + bad_loadstore: + gprintk(XENLOG_ERR, "unhandled Arm instruction 0x%x\n",
instr->value);
+ return 1;(quoted diff) +2
-0+} +static int
decode_thumb(register_t pc, struct hsr_dabt *dabt){
uint16_tinstr;(quoted diff) +0
-0@@ -150,17 +245,44 @@ bad_thumb:Quoted 8 lines
xen/arch/arm/decode.c bad_thumb2: · line 89
Quoted 6 lines
xen/arch/arm/decode.c +2
-0return 1; } -int decode_instruction(const struct cpu_user_regs *regs, struct hsr_dabt *dabt) +int decode_instruction(const struct cpu_user_regs *regs, structhsr_dabt *dabt, + union ldr_str_instr_class *instr)I would like to avoid make the assumption that the instr we decode will always be a store/load. So please rename it to something more generic.
Quoted 1 line
A difference of thought. Should we not name it as per the current usage ? This will avoid any ambiguity.
What ambiguity? The caller should be completely agnostic to what instruction we decode.
Quoted 1 line
Later, if this gets extended, then it can be named more appropriately depending on the usage.
Renaming afterwards is exactly what I want to avoid.
Quoted 2 lines
Also, the bit-pattern in "union
ldr_str_instr_class" is very much specific to ldr/str.
I agree that the bit-pattern is specific to load/store. But that's just one way to interpret the 32-bit value. It would be easy to add another way to interpret it. I.e:
union
{
value;
struct {
} str_ldr;
struct {
} brk;
}
Quoted 2 lines
Quoted 1 line
I think moving if ( !dabt.valid ) earlier should be part of a pre-patch. This would allows us to backport it as we don't want to forward the I/O to an IOREQ server if ISV=0.
I would say that in the pre-patch, we should move "if ( !dabt.valid )" before "
find_mmio_handler()". The reason being if the intruction was not decoded successfully (ie ISV=0), then there is no need to find the mmio handler corresponding to the gpa. Please let me know your thoughts and I can send the pre-patch.
Sounds good to me.
Quoted 13 lines
Quoted 12 lines
xen/arch/arm/io.c enum io_state try_handle_mmio(struct · line 149
Quoted 10 lines
xen/arch/arm/io.c +1
-0/** Erratum 766422: Thumb store translation fault to Hypervisor may * not have correct HSR Rt value. @@ -134,7 +145,7 @@ enum io_state try_handle_mmio(structcpu_user_regs *regs, { int rc; - rc = decode_instruction(regs, &info.dabt); + rc = decode_instruction(regs, &info.dabt, NULL);Could we combine the two
decode_instruction()?
Quoted 1 line
Do you mean something like this :-
Yes. But...
Quoted 8 lines
if ( (!info.dabt.valid ) || ((
check_workaround_766422()&& (regs->cpsr&PSR_THUMB) &&
dabt.write) ){
rc =
decode_instruction(regs, &info.dabt, &instr); // We know
that forPSR_THUMB, instr is ignored.
... without this comment. Also see my reply to Stefano's email.
[...]
Quoted 18 lines
So you mean something like this (in traps.c):-
#if
CONFIG_ARM_64void
post_increment_register(union ldr_str_instr_class *instr){
// handle the post increment
}
#else
void
post_increment_register(union ldr_str_instr_class *instr){
Quoted 7 lines
ASSERT_UNREACHABLE();}
#endif
If so, I am fine with this.
Yes.
Cheers,
Signature · 1 line
Julien Grall
Quoted 4 lines · Ayan Kumar Halder
Quoted 3 lines
Furthermore,
decode.cshould only contain code to update the syndrome and in theory Arm could decide to provide an valid syndrome in future revision. So I would move this code inio.c(or maybetraps.c).@Stefano/Julien - Can we all agree on
traps.c?
Fine by me
Hi Ayan,
Below some more comments on a few issues I noticed while reviewing your other patch yesterday.
Quoted 15 lines · Ayan Kumar Halder
xen/arch/arm/io.c +4
-0@@ -106,14 +106,29 @@ enum io_state try_handle_mmio(struct cpu_user_regs *regs, .gpa = gpa, .dabt = dabt }; +int rc; +union ldr_str_instr_class instr = {0 };ASSERT (hsr.ec ==HSR_EC_DATA_ABORT_LOWER_EL ); +/* +* Armv8 processor does not provide a valid syndrome for post-indexing
xen/arch/arm/io.c enum io_state try_handle_mmio(struct cpu_user_regs *regs, · line 125
Quoted 10 lines
xen/arch/arm/io.c +10
-0+* ldr/str instructions. So in order to process these instructions, +* Xen must decode them. +*/ +if ( !info.dabt.valid ) + { + rc =decode_instruction (regs, &info.dabt, &instr); +if ( rc ) + { +gprintk (XENLOG_DEBUG ,"Unable to decode instruction\n" ); +return IO_ABORT ;
Sorry, I should have noticed this earlier.
If we return IO_ABORT here, it means Xen will inject an abort to the domain. However, an I/O may trap in Xen for other reasons. One explain is when Xen modify the P2M it has to temporarily remove the mapping and then recreate it. This leaves a small window when an access may trap.
In this situation, we don't care that the instruction syndrome is invalid. Therefore, it would be wrong to inject an abort to the domain. What we want is looking whether another part of Xen handles it.
One possibility would be to return IO_UNHANDLED here. However... it means that we will end up to decode the instruction when this is not necessary. So I think we want to move the decode after find_mmio_handler() has succeeded.
Regarding, try_fwd_ioserv(). As you rightly pointed out, it already contains a dabt.valid check. We would want to augment it to decode the instruction. I think the thumb workaround should be there as well.
Quoted 38 lines
xen/arch/arm/io.c +5
-8+ } + } + handler =find_mmio_handler (v->domain, info.gpa);if ( !handler ) { -int rc; - rc =try_fwd_ioserv (regs, v, &info);if ( rc ==IO_HANDLED )return handle_ioserv (regs, v);@@ -121,10 +136,6 @@ enum io_state try_handle_mmio(struct cpu_user_regs *regs,return rc; } -/* All the instructions used on emulated MMIO region should be valid */ -if ( !dabt.valid ) -return IO_ABORT ; -/* * Erratum 766422: Thumb store translation fault to Hypervisor may * not have correct HSR Rt value. @@ -134,7 +145,7 @@ enum io_state try_handle_mmio(struct cpu_user_regs *regs, {int rc; - rc =decode_instruction (regs, &info.dabt); + rc =decode_instruction (regs, &info.dabt,NULL );if ( rc ) {gprintk (XENLOG_DEBUG ,"Unable to decode instruction\n" );@@ -143,9 +154,21 @@ enum io_state try_handle_mmio(struct cpu_user_regs *regs, }if ( info.dabt.write ) -return handle_write (handler, v, &info); + rc =handle_write (handler, v, &info);else
xen/arch/arm/io.c enum io_state try_handle_mmio(struct cpu_user_regs *regs, · line 167
Quoted 10 lines
xen/arch/arm/io.c +9
-1-return handle_read (handler, v, &info); + rc =handle_read (handler, v, &info); + +#if CONFIG_ARM_64 +if ( (is_64bit_domain (current->domain) && !psr_mode_is_32bit (regs)) ) + { +if ( instr.value !=0 ) + { +post_increment_register (&instr); + }
This path will not be reached when the I/O is forwarded to an IOREQ server. I think we need to add similar code in arch_ioreq_complete_mmio() (just before advance_pc()).
Just for completeness, even if it would be easier, I don't think we can update the register before the MMIO is handled (i.e. in try_fwd_ioserv()) because in theory the instruction is not completed. So I am a bit worry that this may impact other subsystem (the obvious one are the registers dump would be incorrect).
Cheers,
Signature · 1 line
Julien Grall