Skip to contentSkip to conversation

x86/cpu: Do some janitorial work

PATCH Applied Borislav Petkov 4 participants 26 messages Jan 27, 2022 – Apr 4, 2022

Subsystems (4)
lore
Share & tools
lore

Borislav Petkov

author maintainer
#0 lore raw

v2 cover x86/cpu: Do some janitorial work

From: Borislav Petkov <[email protected]>

Hi all,

here's v2 with some adjustments due to dependent changes which went upstream, in the meantime. I figure I should send them out one more time before I queue them.

Also, patch 1 handles printing of naked feature numbers for which we don't generate a string for /proc/cpuinfo now too.

Thx.

changelog:
----------

v1
--

Beef up clearcpuid= so that it supports the strings from /proc/cpuinfo too and remove a bunch of useless, and, in some cases even downright dangerous, chicken bits we have added over the years.

Borislav Petkov (6):
x86/cpu: Allow feature bit names from /proc/cpuinfo in clearcpuid= x86/cpu: Remove "nosep"
x86/cpu: Remove CONFIG_X86_SMAP and "nosmap"
x86/cpu: Remove "nosmep"
x86/cpu: Remove "noexec"
x86/cpu: Remove "noclflush"

 .../admin-guide/kernel-parameters.txt         | 24 ++---
 Documentation/x86/cpuinfo.rst                 |  5 +-
 Documentation/x86/x86_64/boot-options.rst     |  9 --
 arch/x86/Kconfig                              | 11 ---
 arch/x86/include/asm/cpufeature.h             |  7 +-
 arch/x86/include/asm/disabled-features.h      |  8 +-
 arch/x86/include/asm/proto.h                  |  1 -
 arch/x86/include/asm/smap.h                   | 24 -----
 arch/x86/kernel/cpu/common.c                  | 94 +++++++++----------
 arch/x86/kernel/setup.c                       | 28 +++++-
 arch/x86/mm/Makefile                          |  3 +-
 arch/x86/mm/init_64.c                         |  1 -
 arch/x86/mm/setup_nx.c                        | 62 ------------
 scripts/Makefile.build                        |  1 -
 scripts/link-vmlinux.sh                       |  3 -
 .../arch/x86/include/asm/disabled-features.h  |  8 +-
 16 files changed, 91 insertions(+), 198 deletions(-)
 delete mode 100644 arch/x86/mm/setup_nx.c
Signature · 1 line
2.29.2
author maintainer
#1 lore raw

PATCH v2 1/6 x86/cpu: Allow feature bit names from /proc/cpuinfo in clearcpuid=

From: Borislav Petkov <[email protected]>

Having to give the X86_FEATURE array indices in order to disable a feature bit for testing is not really user-friendly. So accept the feature bit names too.

Some feature bits don't have names so there the array indices are still accepted, of course.

Clearing CPUID flags is not something which should be done in production so taint the kernel too.

An exemplary cmdline would then be something like:

clearcpuid=de,440,smca,succory,bmi1,3dnow

("succory" is wrong on purpose). And it says:

[    0.000000] Clearing CPUID bits: de 13:24 smca bmi1 3dnow
---
 .../admin-guide/kernel-parameters.txt         | 11 +++-
 arch/x86/include/asm/cpufeature.h             |  7 ++-
 arch/x86/kernel/cpu/common.c                  | 57 +++++++++++++++----
 3 files changed, 58 insertions(+), 17 deletions(-)
Documentation/admin-guide/kernel-parameters.txt +8 -3
index f5a27f067db9..b67d0cf27997 100644
@@ -631,12 +631,17 @@
 			Defaults to zero when built as a module and to
 			10 seconds when built into the kernel.
 
-	clearcpuid=BITNUM[,BITNUM...] [X86]
+	clearcpuid=X[,X...] [X86]
 			Disable CPUID feature X for the kernel. See
 			arch/x86/include/asm/cpufeatures.h for the valid bit
-			numbers. Note the Linux specific bits are not necessarily
-			stable over kernel options, but the vendor specific
+			numbers X. Note the Linux-specific bits are not necessarily
+			stable over kernel options, but the vendor-specific
 			ones should be.
+			X can also be a string as appearing in the flags: line
+			in /proc/cpuinfo which does not have the above
+			instability issue. However, not all features have names
+			in /proc/cpuinfo.
+			Note that using this option will taint your kernel.
 			Also note that user programs calling CPUID directly
 			or using the feature without checking anything
 			will still see it. This just prevents it from
arch/x86/include/asm/cpufeature.h +5 -2
index 1261842d006c..66d3e3b1d24d 100644
@@ -34,14 +34,17 @@ enum cpuid_leafs
 	CPUID_8000_001F_EAX,
 };
 
+#define X86_CAP_FMT_NUM "%d:%d"
+#define x86_cap_flag_num(flag) ((flag) >> 5), ((flag) & 31)
+
 #ifdef CONFIG_X86_FEATURE_NAMES
 extern const char * const x86_cap_flags[NCAPINTS*32];
 extern const char * const x86_power_flags[32];
 #define X86_CAP_FMT "%s"
 #define x86_cap_flag(flag) x86_cap_flags[flag]
 #else
-#define X86_CAP_FMT "%d:%d"
-#define x86_cap_flag(flag) ((flag) >> 5), ((flag) & 31)
+#define X86_CAP_FMT X86_CAP_FMT_NUM
+#define x86_cap_flag x86_cap_flag_num
 #endif
 
 /*
arch/x86/kernel/cpu/common.c +45 -12

74 lines not on this page · raw message

Signature · 1 line
2.29.2
author maintainer
#5 lore raw

PATCH v2 2/6 x86/cpu: Remove "nosep"

In reply to Borislav Petkov

From: Borislav Petkov <[email protected]>

That chicken bit was added by

4f88651125e2 ("[PATCH] i386: allow disabling X86_FEATURE_SEP at boot")

but measuring int80 vsyscall performance on 32-bit doesn't matter anymore.

If still needed, one can boot with

clearcpuid=sep

to disable that feature for testing.

---
 Documentation/admin-guide/kernel-parameters.txt | 2 --
 arch/x86/kernel/cpu/common.c                    | 7 -------
 2 files changed, 9 deletions(-)
Documentation/admin-guide/kernel-parameters.txt +0 -2
index b67d0cf27997..2b35a45c2fd3 100644
@@ -3599,8 +3599,6 @@
 
 	nosbagart	[IA-64]
 
-	nosep		[BUGS=X86-32] Disables x86 SYSENTER/SYSEXIT support.
-
 	nosgx		[X86-64,SGX] Disables Intel SGX kernel support.
 
 	nosmp		[SMP] Tells an SMP kernel to act as a UP kernel,
arch/x86/kernel/cpu/common.c +0 -7
index aaac18d800a4..f394851db082 100644
@@ -220,13 +220,6 @@ static int __init cachesize_setup(char *str)
 }
 __setup("cachesize=", cachesize_setup);
 
-static int __init x86_sep_setup(char *s)
-{
-	setup_clear_cpu_cap(X86_FEATURE_SEP);
-	return 1;
-}
-__setup("nosep", x86_sep_setup);
-
 /* Standard macro to see if a specific flag is changeable */
 static inline int flag_is_changeable_p(u32 flag)
 {
Signature · 1 line
2.29.2
author maintainer
#8 lore raw

PATCH v2 3/6 x86/cpu: Remove CONFIG_X86_SMAP and "nosmap"

In reply to Borislav Petkov

From: Borislav Petkov <[email protected]>

Those were added as part of the SMAP enablement but SMAP is currently an integral part of kernel proper and there's no need to disable it anymore.

Rip out that functionality.

If still needed - clearcpuid=smap.

---
 .../admin-guide/kernel-parameters.txt         |  2 +-
 Documentation/x86/cpuinfo.rst                 |  5 ++--
 arch/x86/Kconfig                              | 11 ---------
 arch/x86/include/asm/disabled-features.h      |  8 +------
 arch/x86/include/asm/smap.h                   | 24 -------------------
 arch/x86/kernel/cpu/common.c                  | 15 +-----------
 scripts/Makefile.build                        |  1 -
 scripts/link-vmlinux.sh                       |  3 ---
 .../arch/x86/include/asm/disabled-features.h  |  8 +------
 9 files changed, 6 insertions(+), 71 deletions(-)
Documentation/admin-guide/kernel-parameters.txt +1 -1
index 2b35a45c2fd3..04b155a4298f 100644
@@ -3394,7 +3394,7 @@
 			noexec=on: enable non-executable mappings (default)
 			noexec=off: disable non-executable mappings
 
-	nosmap		[X86,PPC]
+	nosmap		[PPC]
 			Disable SMAP (Supervisor Mode Access Prevention)
 			even if it is supported by processor.
 
Documentation/x86/cpuinfo.rst +2 -3
index 5d54c39a063f..12fbe2b1e98a 100644
@@ -140,9 +140,8 @@ from #define X86_FEATURE_UMIP (16*32 + 2).
 
 In addition, there exists a variety of custom command-line parameters that
 disable specific features. The list of parameters includes, but is not limited
-to, nofsgsbase, nosmap, and nosmep. 5-level paging can also be disabled using
-"no5lvl". SMAP and SMEP are disabled with the aforementioned parameters,
-respectively.
+to, nofsgsbase, and nosmep. 5-level paging can also be disabled using
+"no5lvl". SMEP is disabled with the aforementioned parameter.
 
 e: The feature was known to be non-functional.
 ----------------------------------------------
arch/x86/Kconfig +0 -11
index ebe8fc76949a..836fa757dbce 100644
@@ -1834,17 +1834,6 @@ config ARCH_RANDOM
 	  If supported, this is a high bandwidth, cryptographically
 	  secure hardware random number generator.
 
-config X86_SMAP
-	def_bool y
-	prompt "Supervisor Mode Access Prevention" if EXPERT
-	help
-	  Supervisor Mode Access Prevention (SMAP) is a security
-	  feature in newer Intel processors.  There is a small
-	  performance cost if this enabled and turned on; there is
-	  also a small increase in the kernel size if this is enabled.
-
-	  If unsure, say Y.
-
 config X86_UMIP
 	def_bool y
 	prompt "User Mode Instruction Prevention" if EXPERT
arch/x86/include/asm/disabled-features.h +1 -7
index 8f28fafa98b3..c2808f4d61f0 100644
@@ -10,12 +10,6 @@
  * cpu_feature_enabled().
  */
 
-#ifdef CONFIG_X86_SMAP
-# define DISABLE_SMAP	0
-#else
-# define DISABLE_SMAP	(1<<(X86_FEATURE_SMAP & 31))
-#endif
-
 #ifdef CONFIG_X86_UMIP
 # define DISABLE_UMIP	0
 #else
@@ -77,7 +71,7 @@
 #define DISABLED_MASK6	0
 #define DISABLED_MASK7	(DISABLE_PTI)
 #define DISABLED_MASK8	0
-#define DISABLED_MASK9	(DISABLE_SMAP|DISABLE_SGX)
+#define DISABLED_MASK9	(DISABLE_SGX)
 #define DISABLED_MASK10	0
 #define DISABLED_MASK11	0
 #define DISABLED_MASK12	0
arch/x86/include/asm/smap.h +0 -24
index d17b39893b79..bab490379c65 100644
@@ -19,25 +19,14 @@
 
 #ifdef __ASSEMBLY__
 
-#ifdef CONFIG_X86_SMAP
-
 #define ASM_CLAC \
 	ALTERNATIVE "", __ASM_CLAC, X86_FEATURE_SMAP
 
 #define ASM_STAC \
 	ALTERNATIVE "", __ASM_STAC, X86_FEATURE_SMAP
 
-#else /* CONFIG_X86_SMAP */
-
-#define ASM_CLAC
-#define ASM_STAC
-
-#endif /* CONFIG_X86_SMAP */
-
 #else /* __ASSEMBLY__ */
 
-#ifdef CONFIG_X86_SMAP
-
 static __always_inline void clac(void)
 {
 	/* Note: a barrier is implicit in alternative() */
@@ -76,19 +65,6 @@ static __always_inline void smap_restore(unsigned long flags)
 #define ASM_STAC \
 	ALTERNATIVE("", __ASM_STAC, X86_FEATURE_SMAP)
 
-#else /* CONFIG_X86_SMAP */
-
-static inline void clac(void) { }
-static inline void stac(void) { }
-
-static inline unsigned long smap_save(void) { return 0; }
-static inline void smap_restore(unsigned long flags) { }
-
-#define ASM_CLAC
-#define ASM_STAC
-
-#endif /* CONFIG_X86_SMAP */
-
 #endif /* __ASSEMBLY__ */
 
 #endif /* _ASM_X86_SMAP_H */
arch/x86/kernel/cpu/common.c +1 -14
index f394851db082..7e5d695279bc 100644
@@ -304,13 +304,6 @@ static __always_inline void setup_smep(struct cpuinfo_x86 *c)
 		cr4_set_bits(X86_CR4_SMEP);
 }
 
-static __init int setup_disable_smap(char *arg)
-{
-	setup_clear_cpu_cap(X86_FEATURE_SMAP);
-	return 1;
-}
-__setup("nosmap", setup_disable_smap);
-
 static __always_inline void setup_smap(struct cpuinfo_x86 *c)
 {
 	unsigned long eflags = native_save_fl();
@@ -318,14 +311,8 @@ static __always_inline void setup_smap(struct cpuinfo_x86 *c)
 	/* This should have been cleared long ago */
 	BUG_ON(eflags & X86_EFLAGS_AC);
 
-	if (cpu_has(c, X86_FEATURE_SMAP)) {
-#ifdef CONFIG_X86_SMAP
+	if (cpu_has(c, X86_FEATURE_SMAP))
 		cr4_set_bits(X86_CR4_SMAP);
-#else
-		clear_cpu_cap(c, X86_FEATURE_SMAP);
-		cr4_clear_bits(X86_CR4_SMAP);
-#endif
-	}
 }
 
 static __always_inline void setup_umip(struct cpuinfo_x86 *c)
scripts/Makefile.build +0 -1
index a4b89b757287..9b37902607ed 100644
@@ -233,7 +233,6 @@ objtool_args =								\
 	$(if $(CONFIG_FRAME_POINTER),, --no-fp)				\
 	$(if $(CONFIG_GCOV_KERNEL)$(CONFIG_LTO_CLANG), --no-unreachable)\
 	$(if $(CONFIG_RETPOLINE), --retpoline)				\
-	$(if $(CONFIG_X86_SMAP), --uaccess)				\
 	$(if $(CONFIG_FTRACE_MCOUNT_USE_OBJTOOL), --mcount)		\
 	$(if $(CONFIG_SLS), --sls)
 
scripts/link-vmlinux.sh +0 -3
index 666f7bbc13eb..8547aaa1a630 100755
@@ -140,9 +140,6 @@ objtool_link()
 		if is_enabled CONFIG_RETPOLINE; then
 			objtoolopt="${objtoolopt} --retpoline"
 		fi
-		if is_enabled CONFIG_X86_SMAP; then
-			objtoolopt="${objtoolopt} --uaccess"
-		fi
 		if is_enabled CONFIG_SLS; then
 			objtoolopt="${objtoolopt} --sls"
 		fi
tools/arch/x86/include/asm/disabled-features.h +1 -7
index 8f28fafa98b3..c2808f4d61f0 100644
@@ -10,12 +10,6 @@
  * cpu_feature_enabled().
  */
 
-#ifdef CONFIG_X86_SMAP
-# define DISABLE_SMAP	0
-#else
-# define DISABLE_SMAP	(1<<(X86_FEATURE_SMAP & 31))
-#endif
-
 #ifdef CONFIG_X86_UMIP
 # define DISABLE_UMIP	0
 #else
@@ -77,7 +71,7 @@
 #define DISABLED_MASK6	0
 #define DISABLED_MASK7	(DISABLE_PTI)
 #define DISABLED_MASK8	0
-#define DISABLED_MASK9	(DISABLE_SMAP|DISABLE_SGX)
+#define DISABLED_MASK9	(DISABLE_SGX)
 #define DISABLED_MASK10	0
 #define DISABLED_MASK11	0
 #define DISABLED_MASK12	0
Signature · 1 line
2.29.2
author maintainer
#15 lore raw

PATCH v2 4/6 x86/cpu: Remove "nosmep"

In reply to Borislav Petkov

From: Borislav Petkov <[email protected]>

There should be no need to disable SMEP anymore.

---
 Documentation/admin-guide/kernel-parameters.txt | 2 +-
 Documentation/x86/cpuinfo.rst                   | 4 ++--
 arch/x86/kernel/cpu/common.c                    | 7 -------
 3 files changed, 3 insertions(+), 10 deletions(-)
Documentation/admin-guide/kernel-parameters.txt +1 -1
index 04b155a4298f..e3894159c22b 100644
@@ -3398,7 +3398,7 @@
 			Disable SMAP (Supervisor Mode Access Prevention)
 			even if it is supported by processor.
 
-	nosmep		[X86,PPC64s]
+	nosmep		[PPC64s]
 			Disable SMEP (Supervisor Mode Execution Prevention)
 			even if it is supported by processor.
 
Documentation/x86/cpuinfo.rst +2 -2
index 12fbe2b1e98a..08246e8ac835 100644
@@ -140,8 +140,8 @@ from #define X86_FEATURE_UMIP (16*32 + 2).
 
 In addition, there exists a variety of custom command-line parameters that
 disable specific features. The list of parameters includes, but is not limited
-to, nofsgsbase, and nosmep. 5-level paging can also be disabled using
-"no5lvl". SMEP is disabled with the aforementioned parameter.
+to, nofsgsbase, nosgx, noxsave, etc. 5-level paging can also be disabled using
+"no5lvl".
 
 e: The feature was known to be non-functional.
 ----------------------------------------------
arch/x86/kernel/cpu/common.c +0 -7
index 7e5d695279bc..3d0a5340a678 100644
@@ -291,13 +291,6 @@ static inline void squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
 }
 #endif
 
-static __init int setup_disable_smep(char *arg)
-{
-	setup_clear_cpu_cap(X86_FEATURE_SMEP);
-	return 1;
-}
-__setup("nosmep", setup_disable_smep);
-
 static __always_inline void setup_smep(struct cpuinfo_x86 *c)
 {
 	if (cpu_has(c, X86_FEATURE_SMEP))
Signature · 1 line
2.29.2
author maintainer
#18 lore raw

PATCH v2 5/6 x86/cpu: Remove "noexec"

In reply to Borislav Petkov

From: Borislav Petkov <[email protected]>

It doesn't make any sense to disable non-executable mappings - security-wise or else.

So rip out that switch and move the remaining code into setup.c and delete setup_nx.c

---
 .../admin-guide/kernel-parameters.txt         |  5 --
 Documentation/x86/x86_64/boot-options.rst     |  9 ---
 arch/x86/include/asm/proto.h                  |  1 -
 arch/x86/kernel/setup.c                       | 28 ++++++++-
 arch/x86/mm/Makefile                          |  3 +-
 arch/x86/mm/init_64.c                         |  1 -
 arch/x86/mm/setup_nx.c                        | 62 -------------------
 7 files changed, 26 insertions(+), 83 deletions(-)
 delete mode 100644 arch/x86/mm/setup_nx.c
Documentation/admin-guide/kernel-parameters.txt +0 -5
index e3894159c22b..dd398f83b335 100644
@@ -3389,11 +3389,6 @@
 
 	noexec		[IA-64]
 
-	noexec		[X86]
-			On X86-32 available only on PAE configured kernels.
-			noexec=on: enable non-executable mappings (default)
-			noexec=off: disable non-executable mappings
-
 	nosmap		[PPC]
 			Disable SMAP (Supervisor Mode Access Prevention)
 			even if it is supported by processor.
Documentation/x86/x86_64/boot-options.rst +0 -9
index ccb7e86bf8d9..e72c60210285 100644
@@ -164,15 +164,6 @@ Rebooting
      newer BIOS, or newer board) using this option will ignore the built-in
      quirk table, and use the generic default reboot actions.
 
-Non Executable Mappings
-=======================
-
-  noexec=on|off
-    on
-      Enable(default)
-    off
-      Disable
-
 NUMA
 ====
 
arch/x86/include/asm/proto.h +0 -1
index feed36d44d04..0f899c8d7a4e 100644
@@ -35,7 +35,6 @@ void xen_entry_INT80_compat(void);
 #endif
 
 void x86_configure_nx(void);
-void x86_report_nx(void);
 
 extern int reboot_force;
 
arch/x86/kernel/setup.c +25 -3
index f7a132eb794d..07a395803957 100644
@@ -740,6 +740,30 @@ dump_kernel_offset(struct notifier_block *self, unsigned long v, void *p)
 	return 0;
 }
 
+void x86_configure_nx(void)
+{
+	if (boot_cpu_has(X86_FEATURE_NX))
+		__supported_pte_mask |= _PAGE_NX;
+	else
+		__supported_pte_mask &= ~_PAGE_NX;
+}
+
+static void __init x86_report_nx(void)
+{
+	if (!boot_cpu_has(X86_FEATURE_NX)) {
+		printk(KERN_NOTICE "Notice: NX (Execute Disable) protection "
+		       "missing in CPU!\n");
+	} else {
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
+		printk(KERN_INFO "NX (Execute Disable) protection: active\n");
+#else
+		/* 32bit non-PAE kernel, NX cannot be used */
+		printk(KERN_NOTICE "Notice: NX (Execute Disable) protection "
+		       "cannot be enabled: non-PAE kernel!\n");
+#endif
+	}
+}
+
 /*
  * Determine if we were loaded by an EFI loader.  If so, then we have also been
  * passed the efi memmap, systab, etc., so we should use these data structures
@@ -880,9 +904,7 @@ void __init setup_arch(char **cmdline_p)
 	/*
 	 * x86_configure_nx() is called before parse_early_param() to detect
 	 * whether hardware doesn't support NX (so that the early EHCI debug
-	 * console setup can safely call set_fixmap()). It may then be called
-	 * again from within noexec_setup() during parsing early parameters
-	 * to honor the respective command line option.
+	 * console setup can safely call set_fixmap()).
 	 */
 	x86_configure_nx();
 
arch/x86/mm/Makefile +1 -2
index fe3d3061fc11..d957dc15b371 100644
@@ -20,13 +20,12 @@ CFLAGS_REMOVE_mem_encrypt_identity.o	= -pg
 endif
 
 obj-y				:=  init.o init_$(BITS).o fault.o ioremap.o extable.o mmap.o \
-				    pgtable.o physaddr.o setup_nx.o tlb.o cpu_entry_area.o maccess.o
+				    pgtable.o physaddr.o tlb.o cpu_entry_area.o maccess.o
 
 obj-y				+= pat/
 
 # Make sure __phys_addr has no stackprotector
 CFLAGS_physaddr.o		:= -fno-stack-protector
-CFLAGS_setup_nx.o		:= -fno-stack-protector
 CFLAGS_mem_encrypt_identity.o	:= -fno-stack-protector
 
 CFLAGS_fault.o := -I $(srctree)/$(src)/../include/asm/trace
arch/x86/mm/init_64.c +0 -1
index 96d34ebb20a9..d2e484efdfa1 100644
@@ -110,7 +110,6 @@ int force_personality32;
 /*
  * noexec32=on|off
  * Control non executable heap for 32bit processes.
- * To control the stack too use noexec=off
  *
  * on	PROT_READ does not imply PROT_EXEC for 32-bit processes (default)
  * off	PROT_READ implies PROT_EXEC
arch/x86/mm/setup_nx.c deleted +0 -62

62 lines not on this page · raw message

Signature · 1 line
2.29.2
author maintainer
#23 lore raw

PATCH v2 6/6 x86/cpu: Remove "noclflush"

In reply to Borislav Petkov

From: Borislav Petkov <[email protected]>

Not really needed anymore and there's clearcpuid=.

---
 Documentation/admin-guide/kernel-parameters.txt | 2 --
 arch/x86/kernel/cpu/common.c                    | 8 --------
 2 files changed, 10 deletions(-)
Documentation/admin-guide/kernel-parameters.txt +0 -2
index dd398f83b335..9882c0cc9722 100644
@@ -3377,8 +3377,6 @@
 
 	nocache		[ARM]
 
-	noclflush	[BUGS=X86] Don't use the CLFLUSH instruction
-
 	delayacct	[KNL] Enable per-task delay accounting
 
 	nodsp		[SH] Disable hardware DSP at boot time.
arch/x86/kernel/cpu/common.c +0 -8
index 3d0a5340a678..c090cc69c615 100644
@@ -1727,14 +1727,6 @@ void identify_secondary_cpu(struct cpuinfo_x86 *c)
 	update_srbds_msr();
 }
 
-static __init int setup_noclflush(char *arg)
-{
-	setup_clear_cpu_cap(X86_FEATURE_CLFLUSH);
-	setup_clear_cpu_cap(X86_FEATURE_CLFLUSHOPT);
-	return 1;
-}
-__setup("noclflush", setup_noclflush);
-
 void print_cpu_info(struct cpuinfo_x86 *c)
 {
 	const char *vendor = NULL;
Signature · 1 line
2.29.2
Reviewed-by on v2 2/6
#6 lore raw

Re: [PATCH v2 2/6] x86/cpu: Remove "nosep"

In reply to Borislav Petkov
Quoted 9 lines · Borislav Petkov

From: Borislav Petkov <[email protected]>

That chicken bit was added by

4f88651125e2 ("[PATCH] i386: allow disabling X86_FEATURE_SEP at boot")

but measuring int80 vsyscall performance on 32-bit doesn't matter anymore.

Quoted 7 lines

If still needed, one can boot with

clearcpuid=sep

to disable that feature for testing.

Signature · 1 line
Kees Cook
Reviewed-by on v2 1/6
#2 lore raw

Re: [PATCH v2 1/6] x86/cpu: Allow feature bit names from /proc/cpuinfo in clearcpuid=

In reply to Borislav Petkov
Quoted 14 lines · Borislav Petkov

From: Borislav Petkov <[email protected]>

Having to give the X86_FEATURE array indices in order to disable a feature bit for testing is not really user-friendly. So accept the feature bit names too.

Some feature bits don't have names so there the array indices are still accepted, of course.

Clearing CPUID flags is not something which should be done in production so taint the kernel too.

An exemplary cmdline would then be something like:

Quoted 7 lines

clearcpuid=de,440,smca,succory,bmi1,3dnow

("succory" is wrong on purpose). And it says:

[    0.000000] Clearing CPUID bits: de 13:24 smca bmi1 3dnow

I like the taint flag addition!

Even though it reports what it does actually clear, do you think it might be more "friendly" to yell about unknown stuff too? i.e.:

[    0.000000] Clearing CPUID bits: unknown bit 'succory'
[    0.000000] Clearing CPUID bits: de 13:24 smca bmi1 3dnow

Either way:

Signature · 1 line
Kees Cook
#9 lore raw

Re: [PATCH v2 3/6] x86/cpu: Remove CONFIG_X86_SMAP and "nosmap"

In reply to Borislav Petkov
Quoted 41 lines · Borislav Petkov

From: Borislav Petkov <[email protected]>

Those were added as part of the SMAP enablement but SMAP is currently an integral part of kernel proper and there's no need to disable it anymore.

Rip out that functionality.

If still needed - clearcpuid=smap.

---
 .../admin-guide/kernel-parameters.txt         |  2 +-
 Documentation/x86/cpuinfo.rst                 |  5 ++--
 arch/x86/Kconfig                              | 11 ---------
 arch/x86/include/asm/disabled-features.h      |  8 +------
 arch/x86/include/asm/smap.h                   | 24 -------------------
 arch/x86/kernel/cpu/common.c                  | 15 +-----------
 scripts/Makefile.build                        |  1 -
 scripts/link-vmlinux.sh                       |  3 ---
 .../arch/x86/include/asm/disabled-features.h  |  8 +------
 9 files changed, 6 insertions(+), 71 deletions(-)

[...]

scripts/Makefile.build +0 -1
index a4b89b757287..9b37902607ed 100644
@@ -233,7 +233,6 @@ objtool_args =								\
 	$(if $(CONFIG_FRAME_POINTER),, --no-fp)				\
 	$(if $(CONFIG_GCOV_KERNEL)$(CONFIG_LTO_CLANG), --no-unreachable)\
 	$(if $(CONFIG_RETPOLINE), --retpoline)				\
-	$(if $(CONFIG_X86_SMAP), --uaccess)				\
 	$(if $(CONFIG_FTRACE_MCOUNT_USE_OBJTOOL), --mcount)		\
 	$(if $(CONFIG_SLS), --sls)
 
scripts/link-vmlinux.sh +0 -0
index 666f7bbc13eb..8547aaa1a630 100755

scripts/link-vmlinux.sh objtool_link() · line 145

Quoted 9 lines
scripts/link-vmlinux.sh +0 -3
@@ -140,9 +140,6 @@ objtool_link()
 		if is_enabled CONFIG_RETPOLINE; then
 			objtoolopt="${objtoolopt} --retpoline"
 		fi
-		if is_enabled CONFIG_X86_SMAP; then
-			objtoolopt="${objtoolopt} --uaccess"
-		fi
 		if is_enabled CONFIG_SLS; then
 			objtoolopt="${objtoolopt} --sls"
 		fi

I was expecting to see --uaccess unconditionally added to objtool arguments. I think that needs to happen?

Signature · 1 line
Kees Cook
Reviewed-by on v2 5/6
#19 lore raw

Re: [PATCH v2 5/6] x86/cpu: Remove "noexec"

In reply to Borislav Petkov
Quoted 10 lines · Borislav Petkov

From: Borislav Petkov <[email protected]>

It doesn't make any sense to disable non-executable mappings - security-wise or else.

So rip out that switch and move the remaining code into setup.c and delete setup_nx.c

I've dug through the nx fun again. The verify_cpu() calls are untouched (which were the most fiddly part of all that a decade ago), so that's good. The early handling of __supported_pte_mask in x86_configure_nx() is untouched and the call is retained before the param processing for the set_fixmap() dance, so everything I can remember as being "difficult" with NX ordering here looks good.

Thanks for cleaning all this up!

Signature · 1 line
Kees Cook
author maintainer Reviewed-by Kees Cook
#3 lore raw

Re: [PATCH v2 1/6] x86/cpu: Allow feature bit names from /proc/cpuinfo in clearcpuid=

In reply to Kees Cook
Quoted 1 line · Kees Cook

I like the taint flag addition!

IKR. See below.

Quoted 2 lines

Even though it reports what it does actually clear, do you think it might be more "friendly" to yell about unknown stuff too? i.e.:

Well, this thing is not supposed to be used by normal users anyway. There was even talk of completely removing it but CPU folks wanna do some experiments with it, that's why we kept it.

And for exactly the same reason it taints the kernel - so that we know that it is an "out-of-spec" situation.

I even caused an explosion while testing it due to creating an impossible configuration of features.

So, folks who use it better know what they're doing.

Quoted 2 lines
[    0.000000] Clearing CPUID bits: unknown bit 'succory'
[    0.000000] Clearing CPUID bits: de 13:24 smca bmi1 3dnow

How's the below (I don't want to disrupt the pr_cont flow too much):

On the cmdline I have:

... clearcpuid=de,440,smca,succory,bmi1,3dnow,bla,foo ...

which says:

[    0.000000] Clearing CPUID bits: de 13:24 smca (unknown: succory) bmi1 3dnow (unknown: bla) (unknown: foo)
Quoted 1 line

Thx.

---
From: Borislav Petkov <[email protected]>
Date: Thu, 27 Jan 2022 12:56:21 +0100
Subject: [PATCH] x86/cpu: Allow feature bit names from /proc/cpuinfo in clearcpuid=

Having to give the X86_FEATURE array indices in order to disable a feature bit for testing is not really user-friendly. So accept the feature bit names too.

Some feature bits don't have names so there the array indices are still accepted, of course.

Clearing CPUID flags is not something which should be done in production so taint the kernel too.

An exemplary cmdline would then be something like:

clearcpuid=de,440,smca,succory,bmi1,3dnow

("succory" is wrong on purpose). And it says:

[ ... ] Clearing CPUID bits: de 13:24 smca (unknown: succory) bmi1 3dnow

---
 .../admin-guide/kernel-parameters.txt         | 11 +++-
 arch/x86/include/asm/cpufeature.h             |  7 ++-
 arch/x86/kernel/cpu/common.c                  | 62 +++++++++++++++----
 3 files changed, 63 insertions(+), 17 deletions(-)
Documentation/admin-guide/kernel-parameters.txt +8 -3
index f5a27f067db9..b67d0cf27997 100644
@@ -631,12 +631,17 @@
 			Defaults to zero when built as a module and to
 			10 seconds when built into the kernel.
 
-	clearcpuid=BITNUM[,BITNUM...] [X86]
+	clearcpuid=X[,X...] [X86]
 			Disable CPUID feature X for the kernel. See
 			arch/x86/include/asm/cpufeatures.h for the valid bit
-			numbers. Note the Linux specific bits are not necessarily
-			stable over kernel options, but the vendor specific
+			numbers X. Note the Linux-specific bits are not necessarily
+			stable over kernel options, but the vendor-specific
 			ones should be.
+			X can also be a string as appearing in the flags: line
+			in /proc/cpuinfo which does not have the above
+			instability issue. However, not all features have names
+			in /proc/cpuinfo.
+			Note that using this option will taint your kernel.
 			Also note that user programs calling CPUID directly
 			or using the feature without checking anything
 			will still see it. This just prevents it from
arch/x86/include/asm/cpufeature.h +5 -2
index 1261842d006c..66d3e3b1d24d 100644
@@ -34,14 +34,17 @@ enum cpuid_leafs
 	CPUID_8000_001F_EAX,
 };
 
+#define X86_CAP_FMT_NUM "%d:%d"
+#define x86_cap_flag_num(flag) ((flag) >> 5), ((flag) & 31)
+
 #ifdef CONFIG_X86_FEATURE_NAMES
 extern const char * const x86_cap_flags[NCAPINTS*32];
 extern const char * const x86_power_flags[32];
 #define X86_CAP_FMT "%s"
 #define x86_cap_flag(flag) x86_cap_flags[flag]
 #else
-#define X86_CAP_FMT "%d:%d"
-#define x86_cap_flag(flag) ((flag) >> 5), ((flag) & 31)
+#define X86_CAP_FMT X86_CAP_FMT_NUM
+#define x86_cap_flag x86_cap_flag_num
 #endif
 
 /*
arch/x86/kernel/cpu/common.c +50 -12

79 lines not on this page · raw message

Signature · 7 lines
2.29.2

-- 
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette
author maintainer
#10 lore raw

Re: [PATCH v2 3/6] x86/cpu: Remove CONFIG_X86_SMAP and "nosmap"

In reply to Kees Cook
Quoted 46 lines · Kees Cook
Quoted 45 lines · Borislav Petkov

From: Borislav Petkov <[email protected]>

Those were added as part of the SMAP enablement but SMAP is currently an integral part of kernel proper and there's no need to disable it anymore.

Rip out that functionality.

If still needed - clearcpuid=smap.

---
 .../admin-guide/kernel-parameters.txt         |  2 +-
 Documentation/x86/cpuinfo.rst                 |  5 ++--
 arch/x86/Kconfig                              | 11 ---------
 arch/x86/include/asm/disabled-features.h      |  8 +------
 arch/x86/include/asm/smap.h                   | 24 -------------------
 arch/x86/kernel/cpu/common.c                  | 15 +-----------
 scripts/Makefile.build                        |  1 -
 scripts/link-vmlinux.sh                       |  3 ---
 .../arch/x86/include/asm/disabled-features.h  |  8 +------
 9 files changed, 6 insertions(+), 71 deletions(-)

[...]

scripts/Makefile.build +0 -1
index a4b89b757287..9b37902607ed 100644
@@ -233,7 +233,6 @@ objtool_args =								\
 	$(if $(CONFIG_FRAME_POINTER),, --no-fp)				\
 	$(if $(CONFIG_GCOV_KERNEL)$(CONFIG_LTO_CLANG), --no-unreachable)\
 	$(if $(CONFIG_RETPOLINE), --retpoline)				\
-	$(if $(CONFIG_X86_SMAP), --uaccess)				\
 	$(if $(CONFIG_FTRACE_MCOUNT_USE_OBJTOOL), --mcount)		\
 	$(if $(CONFIG_SLS), --sls)
 
scripts/link-vmlinux.sh +0 -1
index 666f7bbc13eb..8547aaa1a630 100755
@@ -140,9 +140,6 @@ objtool_link()
 		if is_enabled CONFIG_RETPOLINE; then
 			objtoolopt="${objtoolopt} --retpoline"
 		fi
-		if is_enabled CONFIG_X86_SMAP; then
Quoted 8 lines

scripts/link-vmlinux.sh objtool_link() · line 145

Quoted 5 lines
scripts/link-vmlinux.sh +0 -2
-			objtoolopt="${objtoolopt} --uaccess"
-		fi
 		if is_enabled CONFIG_SLS; then
 			objtoolopt="${objtoolopt} --sls"
 		fi

I was expecting to see --uaccess unconditionally added to objtool arguments. I think that needs to happen?

Hmm, I think you're right.

Mr. Z?

Signature · 4 lines
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette
#20 lore raw

Re: [PATCH v2 5/6] x86/cpu: Remove "noexec"

In reply to Kees Cook
Quoted 5 lines · Kees Cook
Quoted 4 lines · Borislav Petkov

From: Borislav Petkov <[email protected]>

It doesn't make any sense to disable non-executable mappings - security-wise or else.

Heh, I've actually used noexec relatively recently to triage KVM goofs. That said, the same net result can still be achieved via clearcpuid=52, so I've no objection to removing the dedicated parameter.

author maintainer
#21 lore raw

Re: [PATCH v2 5/6] x86/cpu: Remove "noexec"

Quoted 3 lines · Sean Christopherson

Heh, I've actually used noexec relatively recently to triage KVM goofs. That said, the same net result can still be achieved via clearcpuid=52, so I've no objection to removing the dedicated parameter.

Even better: clearcpuid=nx works now too.

Signature · 4 lines
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette
author maintainer
#11 lore raw

Re: [PATCH v2 3/6] x86/cpu: Remove CONFIG_X86_SMAP and "nosmap"

In reply to Borislav Petkov
Quoted 3 lines · Borislav Petkov

Hmm, I think you're right.

Mr. Z?

He says yes.

Ok, that was a good catch, thanks!

This chunk looks now like this - I'll send a new version later.

---

scripts/Makefile.build +1 -1
index a4b89b757287..404ea669ecca 100644
@@ -233,7 +233,7 @@ objtool_args =								\
 	$(if $(CONFIG_FRAME_POINTER),, --no-fp)				\
 	$(if $(CONFIG_GCOV_KERNEL)$(CONFIG_LTO_CLANG), --no-unreachable)\
 	$(if $(CONFIG_RETPOLINE), --retpoline)				\
-	$(if $(CONFIG_X86_SMAP), --uaccess)				\
+	--uaccess							\
 	$(if $(CONFIG_FTRACE_MCOUNT_USE_OBJTOOL), --mcount)		\
 	$(if $(CONFIG_SLS), --sls)
 
scripts/link-vmlinux.sh +1 -4
index 666f7bbc13eb..0fcba46fc10f 100755
@@ -106,7 +106,7 @@ modpost_link()
 objtool_link()
 {
 	local objtoolcmd;
-	local objtoolopt;
+	local objtoolopt="--uaccess"
 
 	if is_enabled CONFIG_LTO_CLANG && is_enabled CONFIG_STACK_VALIDATION; then
 		# Don't perform vmlinux validation unless explicitly requested,
@@ -140,9 +140,6 @@ objtool_link()
 		if is_enabled CONFIG_RETPOLINE; then
 			objtoolopt="${objtoolopt} --retpoline"
 		fi
-		if is_enabled CONFIG_X86_SMAP; then
-			objtoolopt="${objtoolopt} --uaccess"
-		fi
 		if is_enabled CONFIG_SLS; then
 			objtoolopt="${objtoolopt} --sls"
 		fi
Signature · 4 lines
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette
Reviewed-by
#12 lore raw

Re: [PATCH v2 3/6] x86/cpu: Remove CONFIG_X86_SMAP and "nosmap"

Quoted 39 lines · Borislav Petkov
Quoted 3 lines · Borislav Petkov

Hmm, I think you're right.

Mr. Z?

He says yes.

Ok, that was a good catch, thanks!

This chunk looks now like this - I'll send a new version later.

---

scripts/Makefile.build +1 -1
index a4b89b757287..404ea669ecca 100644
@@ -233,7 +233,7 @@ objtool_args =								\
 	$(if $(CONFIG_FRAME_POINTER),, --no-fp)				\
 	$(if $(CONFIG_GCOV_KERNEL)$(CONFIG_LTO_CLANG), --no-unreachable)\
 	$(if $(CONFIG_RETPOLINE), --retpoline)				\
-	$(if $(CONFIG_X86_SMAP), --uaccess)				\
+	--uaccess							\
 	$(if $(CONFIG_FTRACE_MCOUNT_USE_OBJTOOL), --mcount)		\
 	$(if $(CONFIG_SLS), --sls)
 
scripts/link-vmlinux.sh +1 -1
index 666f7bbc13eb..0fcba46fc10f 100755
@@ -106,7 +106,7 @@ modpost_link()
 objtool_link()
 {
 	local objtoolcmd;
-	local objtoolopt;
+	local objtoolopt="--uaccess"
 
 	if is_enabled CONFIG_LTO_CLANG && is_enabled CONFIG_STACK_VALIDATION; then
 		# Don't perform vmlinux validation unless explicitly requested,

scripts/link-vmlinux.sh objtool_link() · line 145

Quoted 9 lines
scripts/link-vmlinux.sh +0 -3
@@ -140,9 +140,6 @@ objtool_link()
 		if is_enabled CONFIG_RETPOLINE; then
 			objtoolopt="${objtoolopt} --retpoline"
 		fi
-		if is_enabled CONFIG_X86_SMAP; then
-			objtoolopt="${objtoolopt} --uaccess"
-		fi
 		if is_enabled CONFIG_SLS; then
 			objtoolopt="${objtoolopt} --sls"
 		fi

Cool; yeah, that's kind of what I was expecting. I have a knee-jerk "I don't want to touch this again later" reaction to seeing it always applied instead of gated by CONFIG_X86 or something, but then, I doubt that'll be hard to change when/if objtool becomes multi-architecture.

Consider the update as:

Signature · 1 line
Kees Cook
author maintainer
#13 lore raw

Re: [PATCH v2 3/6] x86/cpu: Remove CONFIG_X86_SMAP and "nosmap"

Quoted 4 lines · Kees Cook

Cool; yeah, that's kind of what I was expecting. I have a knee-jerk "I don't want to touch this again later" reaction to seeing it always applied instead of gated by CONFIG_X86 or something, but then, I doubt that'll be hard to change when/if objtool becomes multi-architecture.

Yah, what I had doesn't build with 32-bit allnoconfig etc because of CONFIG_STACK_VALIDATION=n or so. So I ended up doing, see end.

In this case, it gets set only when the earlier LTO_CLANG/STACK/VMLINUX validation options are enabled.

We could do an is_enabled check around it but what would be the correct criterium to enable uaccess validation?

Quoted 3 lines

Consider the update as:

Thx.

---

scripts/Makefile.build +1 -1
index a4b89b757287..404ea669ecca 100644
@@ -233,7 +233,7 @@ objtool_args =								\
 	$(if $(CONFIG_FRAME_POINTER),, --no-fp)				\
 	$(if $(CONFIG_GCOV_KERNEL)$(CONFIG_LTO_CLANG), --no-unreachable)\
 	$(if $(CONFIG_RETPOLINE), --retpoline)				\
-	$(if $(CONFIG_X86_SMAP), --uaccess)				\
+	--uaccess							\
 	$(if $(CONFIG_FTRACE_MCOUNT_USE_OBJTOOL), --mcount)		\
 	$(if $(CONFIG_SLS), --sls)
 
scripts/link-vmlinux.sh +3 -3
index 666f7bbc13eb..fbdb531cca18 100755
@@ -140,9 +140,9 @@ objtool_link()
 		if is_enabled CONFIG_RETPOLINE; then
 			objtoolopt="${objtoolopt} --retpoline"
 		fi
-		if is_enabled CONFIG_X86_SMAP; then
-			objtoolopt="${objtoolopt} --uaccess"
-		fi
+
+		objtoolopt="${objtoolopt} --uaccess"
+
 		if is_enabled CONFIG_SLS; then
 			objtoolopt="${objtoolopt} --sls"
 		fi
Signature · 4 lines
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette
#22 lore raw

[tip: x86/cpu] x86/cpu: Remove "noexec"

In reply to Borislav Petkov
The following commit has been merged into the x86/cpu branch of tip:

The following commit has been merged into the x86/cpu branch of tip:

Commit-ID:     76ea0025a214cdf0d2c204f4c21cbffa9fb57c32
Gitweb:        https://git.kernel.org/tip/76ea0025a214cdf0d2c204f4c21cbffa9fb57c32
Author:        Borislav Petkov <[email protected]>
AuthorDate:    Thu, 27 Jan 2022 12:56:25 +01:00
Committer:     Borislav Petkov <[email protected]>
CommitterDate: Mon, 04 Apr 2022 10:17:03 +02:00

x86/cpu: Remove "noexec"

It doesn't make any sense to disable non-executable mappings - security-wise or else.

So rip out that switch and move the remaining code into setup.c and delete setup_nx.c

---
 Documentation/admin-guide/kernel-parameters.txt |  5 +-
 Documentation/x86/x86_64/boot-options.rst       |  9 +--
 arch/x86/include/asm/proto.h                    |  1 +-
 arch/x86/kernel/setup.c                         | 28 ++++++-
 arch/x86/mm/Makefile                            |  3 +-
 arch/x86/mm/init_64.c                           |  1 +-
 arch/x86/mm/setup_nx.c                          | 62 +----------------
 7 files changed, 26 insertions(+), 83 deletions(-)
 delete mode 100644 arch/x86/mm/setup_nx.c
Documentation/admin-guide/kernel-parameters.txt +0 -5
index 39ac2c1..a2299b2 100644
@@ -3456,11 +3456,6 @@
 
 	noexec		[IA-64]
 
-	noexec		[X86]
-			On X86-32 available only on PAE configured kernels.
-			noexec=on: enable non-executable mappings (default)
-			noexec=off: disable non-executable mappings
-
 	nosmap		[PPC]
 			Disable SMAP (Supervisor Mode Access Prevention)
 			even if it is supported by processor.
Documentation/x86/x86_64/boot-options.rst +0 -9
index 07aa000..fb6030a 100644
@@ -157,15 +157,6 @@ Rebooting
      newer BIOS, or newer board) using this option will ignore the built-in
      quirk table, and use the generic default reboot actions.
 
-Non Executable Mappings
-=======================
-
-  noexec=on|off
-    on
-      Enable(default)
-    off
-      Disable
-
 NUMA
 ====
 
arch/x86/include/asm/proto.h +0 -1
index feed36d..0f899c8 100644
@@ -35,7 +35,6 @@ void xen_entry_INT80_compat(void);
 #endif
 
 void x86_configure_nx(void);
-void x86_report_nx(void);
 
 extern int reboot_force;
 
arch/x86/kernel/setup.c +25 -3
index c95b9ac..249981b 100644
@@ -756,6 +756,30 @@ dump_kernel_offset(struct notifier_block *self, unsigned long v, void *p)
 	return 0;
 }
 
+void x86_configure_nx(void)
+{
+	if (boot_cpu_has(X86_FEATURE_NX))
+		__supported_pte_mask |= _PAGE_NX;
+	else
+		__supported_pte_mask &= ~_PAGE_NX;
+}
+
+static void __init x86_report_nx(void)
+{
+	if (!boot_cpu_has(X86_FEATURE_NX)) {
+		printk(KERN_NOTICE "Notice: NX (Execute Disable) protection "
+		       "missing in CPU!\n");
+	} else {
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
+		printk(KERN_INFO "NX (Execute Disable) protection: active\n");
+#else
+		/* 32bit non-PAE kernel, NX cannot be used */
+		printk(KERN_NOTICE "Notice: NX (Execute Disable) protection "
+		       "cannot be enabled: non-PAE kernel!\n");
+#endif
+	}
+}
+
 /*
  * Determine if we were loaded by an EFI loader.  If so, then we have also been
  * passed the efi memmap, systab, etc., so we should use these data structures
@@ -896,9 +920,7 @@ void __init setup_arch(char **cmdline_p)
 	/*
 	 * x86_configure_nx() is called before parse_early_param() to detect
 	 * whether hardware doesn't support NX (so that the early EHCI debug
-	 * console setup can safely call set_fixmap()). It may then be called
-	 * again from within noexec_setup() during parsing early parameters
-	 * to honor the respective command line option.
+	 * console setup can safely call set_fixmap()).
 	 */
 	x86_configure_nx();
 
arch/x86/mm/Makefile +1 -2
index fe3d306..d957dc1 100644
@@ -20,13 +20,12 @@ CFLAGS_REMOVE_mem_encrypt_identity.o	= -pg
 endif
 
 obj-y				:=  init.o init_$(BITS).o fault.o ioremap.o extable.o mmap.o \
-				    pgtable.o physaddr.o setup_nx.o tlb.o cpu_entry_area.o maccess.o
+				    pgtable.o physaddr.o tlb.o cpu_entry_area.o maccess.o
 
 obj-y				+= pat/
 
 # Make sure __phys_addr has no stackprotector
 CFLAGS_physaddr.o		:= -fno-stack-protector
-CFLAGS_setup_nx.o		:= -fno-stack-protector
 CFLAGS_mem_encrypt_identity.o	:= -fno-stack-protector
 
 CFLAGS_fault.o := -I $(srctree)/$(src)/../include/asm/trace
arch/x86/mm/init_64.c +0 -1
index 96d34eb..d2e484e 100644
@@ -110,7 +110,6 @@ int force_personality32;
 /*
  * noexec32=on|off
  * Control non executable heap for 32bit processes.
- * To control the stack too use noexec=off
  *
  * on	PROT_READ does not imply PROT_EXEC for 32-bit processes (default)
  * off	PROT_READ implies PROT_EXEC
arch/x86/mm/setup_nx.c deleted +0 -62

62 lines not on this page · raw message

#7 lore raw

[tip: x86/cpu] x86/cpu: Remove "nosep"

In reply to Borislav Petkov
The following commit has been merged into the x86/cpu branch of tip:

The following commit has been merged into the x86/cpu branch of tip:

Commit-ID:     c949110ef4e31cb5d3387bd8273fd5de66b5227b
Gitweb:        https://git.kernel.org/tip/c949110ef4e31cb5d3387bd8273fd5de66b5227b
Author:        Borislav Petkov <[email protected]>
AuthorDate:    Thu, 27 Jan 2022 12:56:22 +01:00
Committer:     Borislav Petkov <[email protected]>
CommitterDate: Mon, 04 Apr 2022 10:16:55 +02:00

x86/cpu: Remove "nosep"

That chicken bit was added by

4f88651125e2 ("[PATCH] i386: allow disabling X86_FEATURE_SEP at boot")

but measuring int80 vsyscall performance on 32-bit doesn't matter anymore.

If still needed, one can boot with

clearcpuid=sep

to disable that feature for testing.

---
 Documentation/admin-guide/kernel-parameters.txt | 2 --
 arch/x86/kernel/cpu/common.c                    | 7 -------
 2 files changed, 9 deletions(-)
Documentation/admin-guide/kernel-parameters.txt +0 -2
index 0ea1786..a9f3d31 100644
@@ -3665,8 +3665,6 @@
 
 	nosbagart	[IA-64]
 
-	nosep		[BUGS=X86-32] Disables x86 SYSENTER/SYSEXIT support.
-
 	nosgx		[X86-64,SGX] Disables Intel SGX kernel support.
 
 	nosmp		[SMP] Tells an SMP kernel to act as a UP kernel,
arch/x86/kernel/cpu/common.c +0 -7
index 69c7ea8..c71d107 100644
@@ -298,13 +298,6 @@ static int __init cachesize_setup(char *str)
 }
 __setup("cachesize=", cachesize_setup);
 
-static int __init x86_sep_setup(char *s)
-{
-	setup_clear_cpu_cap(X86_FEATURE_SEP);
-	return 1;
-}
-__setup("nosep", x86_sep_setup);
-
 /* Standard macro to see if a specific flag is changeable */
 static inline int flag_is_changeable_p(u32 flag)
 {
#4 lore raw

[tip: x86/cpu] x86/cpu: Allow feature bit names from /proc/cpuinfo in clearcpuid=

In reply to Borislav Petkov
The following commit has been merged into the x86/cpu branch of tip:

The following commit has been merged into the x86/cpu branch of tip:

Commit-ID:     1625c833db93516faaac5feedadf8d19c14238b6
Gitweb:        https://git.kernel.org/tip/1625c833db93516faaac5feedadf8d19c14238b6
Author:        Borislav Petkov <[email protected]>
AuthorDate:    Thu, 27 Jan 2022 12:56:21 +01:00
Committer:     Borislav Petkov <[email protected]>
CommitterDate: Mon, 04 Apr 2022 10:16:52 +02:00

x86/cpu: Allow feature bit names from /proc/cpuinfo in clearcpuid=

Having to give the X86_FEATURE array indices in order to disable a feature bit for testing is not really user-friendly. So accept the feature bit names too.

Some feature bits don't have names so there the array indices are still accepted, of course.

Clearing CPUID flags is not something which should be done in production so taint the kernel too.

An exemplary cmdline would then be something like:

clearcpuid=de,440,smca,succory,bmi1,3dnow

("succory" is wrong on purpose). And it says:

[ ... ] Clearing CPUID bits: de 13:24 smca (unknown: succory) bmi1 3dnow

[ Fix CONFIG_X86_FEATURE_NAMES=n build error as reported by the 0day

    robot: https://lore.kernel.org/r/[email protected] ]
---
 Documentation/admin-guide/kernel-parameters.txt | 11 ++-
 arch/x86/include/asm/cpufeature.h               |  7 +-
 arch/x86/kernel/cpu/common.c                    | 64 +++++++++++++---
 3 files changed, 65 insertions(+), 17 deletions(-)
Documentation/admin-guide/kernel-parameters.txt +8 -3
index 3f1cc5e..0ea1786 100644
@@ -631,12 +631,17 @@
 			Defaults to zero when built as a module and to
 			10 seconds when built into the kernel.
 
-	clearcpuid=BITNUM[,BITNUM...] [X86]
+	clearcpuid=X[,X...] [X86]
 			Disable CPUID feature X for the kernel. See
 			arch/x86/include/asm/cpufeatures.h for the valid bit
-			numbers. Note the Linux specific bits are not necessarily
-			stable over kernel options, but the vendor specific
+			numbers X. Note the Linux-specific bits are not necessarily
+			stable over kernel options, but the vendor-specific
 			ones should be.
+			X can also be a string as appearing in the flags: line
+			in /proc/cpuinfo which does not have the above
+			instability issue. However, not all features have names
+			in /proc/cpuinfo.
+			Note that using this option will taint your kernel.
 			Also note that user programs calling CPUID directly
 			or using the feature without checking anything
 			will still see it. This just prevents it from
arch/x86/include/asm/cpufeature.h +5 -2
index 1261842..66d3e3b 100644
@@ -34,14 +34,17 @@ enum cpuid_leafs
 	CPUID_8000_001F_EAX,
 };
 
+#define X86_CAP_FMT_NUM "%d:%d"
+#define x86_cap_flag_num(flag) ((flag) >> 5), ((flag) & 31)
+
 #ifdef CONFIG_X86_FEATURE_NAMES
 extern const char * const x86_cap_flags[NCAPINTS*32];
 extern const char * const x86_power_flags[32];
 #define X86_CAP_FMT "%s"
 #define x86_cap_flag(flag) x86_cap_flags[flag]
 #else
-#define X86_CAP_FMT "%d:%d"
-#define x86_cap_flag(flag) ((flag) >> 5), ((flag) & 31)
+#define X86_CAP_FMT X86_CAP_FMT_NUM
+#define x86_cap_flag x86_cap_flag_num
 #endif
 
 /*
arch/x86/kernel/cpu/common.c +52 -12

81 lines not on this page · raw message

#25 lore raw

[tip: x86/cpu] x86/cpu: Remove "noclflush"

In reply to Borislav Petkov
The following commit has been merged into the x86/cpu branch of tip:

The following commit has been merged into the x86/cpu branch of tip:

Commit-ID:     f8858b5eff30d1b2be15ef1ea6285964013b95e6
Gitweb:        https://git.kernel.org/tip/f8858b5eff30d1b2be15ef1ea6285964013b95e6
Author:        Borislav Petkov <[email protected]>
AuthorDate:    Thu, 27 Jan 2022 12:56:26 +01:00
Committer:     Borislav Petkov <[email protected]>
CommitterDate: Mon, 04 Apr 2022 10:17:05 +02:00

x86/cpu: Remove "noclflush"

Not really needed anymore and there's clearcpuid=.

---
 Documentation/admin-guide/kernel-parameters.txt | 2 --
 arch/x86/kernel/cpu/common.c                    | 8 --------
 2 files changed, 10 deletions(-)
Documentation/admin-guide/kernel-parameters.txt +0 -2
index a2299b2..8c18e7d 100644
@@ -3444,8 +3444,6 @@
 
 	nocache		[ARM]
 
-	noclflush	[BUGS=X86] Don't use the CLFLUSH instruction
-
 	delayacct	[KNL] Enable per-task delay accounting
 
 	nodsp		[SH] Disable hardware DSP at boot time.
arch/x86/kernel/cpu/common.c +0 -8
index 5791f69..7dd7604 100644
@@ -1870,14 +1870,6 @@ void identify_secondary_cpu(struct cpuinfo_x86 *c)
 	update_srbds_msr();
 }
 
-static __init int setup_noclflush(char *arg)
-{
-	setup_clear_cpu_cap(X86_FEATURE_CLFLUSH);
-	setup_clear_cpu_cap(X86_FEATURE_CLFLUSHOPT);
-	return 1;
-}
-__setup("noclflush", setup_noclflush);
-
 void print_cpu_info(struct cpuinfo_x86 *c)
 {
 	const char *vendor = NULL;
#17 lore raw

[tip: x86/cpu] x86/cpu: Remove "nosmep"

In reply to Borislav Petkov
The following commit has been merged into the x86/cpu branch of tip:

The following commit has been merged into the x86/cpu branch of tip:

Commit-ID:     385d2ae0a1b5efacb30e13a0f0e521490441d9bb
Gitweb:        https://git.kernel.org/tip/385d2ae0a1b5efacb30e13a0f0e521490441d9bb
Author:        Borislav Petkov <[email protected]>
AuthorDate:    Thu, 27 Jan 2022 12:56:24 +01:00
Committer:     Borislav Petkov <[email protected]>
CommitterDate: Mon, 04 Apr 2022 10:17:00 +02:00

x86/cpu: Remove "nosmep"

There should be no need to disable SMEP anymore.

---
 Documentation/admin-guide/kernel-parameters.txt | 2 +-
 Documentation/x86/cpuinfo.rst                   | 4 ++--
 arch/x86/kernel/cpu/common.c                    | 7 -------
 3 files changed, 3 insertions(+), 10 deletions(-)
Documentation/admin-guide/kernel-parameters.txt +1 -1
index e0bb710..39ac2c1 100644
@@ -3465,7 +3465,7 @@
 			Disable SMAP (Supervisor Mode Access Prevention)
 			even if it is supported by processor.
 
-	nosmep		[X86,PPC64s]
+	nosmep		[PPC64s]
 			Disable SMEP (Supervisor Mode Execution Prevention)
 			even if it is supported by processor.
 
Documentation/x86/cpuinfo.rst +2 -2
index 12fbe2b..08246e8 100644
@@ -140,8 +140,8 @@ from #define X86_FEATURE_UMIP (16*32 + 2).
 
 In addition, there exists a variety of custom command-line parameters that
 disable specific features. The list of parameters includes, but is not limited
-to, nofsgsbase, and nosmep. 5-level paging can also be disabled using
-"no5lvl". SMEP is disabled with the aforementioned parameter.
+to, nofsgsbase, nosgx, noxsave, etc. 5-level paging can also be disabled using
+"no5lvl".
 
 e: The feature was known to be non-functional.
 ----------------------------------------------
arch/x86/kernel/cpu/common.c +0 -7
index 747df07..5791f69 100644
@@ -369,13 +369,6 @@ static inline void squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
 }
 #endif
 
-static __init int setup_disable_smep(char *arg)
-{
-	setup_clear_cpu_cap(X86_FEATURE_SMEP);
-	return 1;
-}
-__setup("nosmep", setup_disable_smep);
-
 static __always_inline void setup_smep(struct cpuinfo_x86 *c)
 {
 	if (cpu_has(c, X86_FEATURE_SMEP))
#14 lore raw

[tip: x86/cpu] x86/cpu: Remove CONFIG_X86_SMAP and "nosmap"

In reply to Borislav Petkov
The following commit has been merged into the x86/cpu branch of tip:

The following commit has been merged into the x86/cpu branch of tip:

Commit-ID:     dbae0a934f09208075ec3e73491bd0844e1397b3
Gitweb:        https://git.kernel.org/tip/dbae0a934f09208075ec3e73491bd0844e1397b3
Author:        Borislav Petkov <[email protected]>
AuthorDate:    Thu, 27 Jan 2022 12:56:23 +01:00
Committer:     Borislav Petkov <[email protected]>
CommitterDate: Mon, 04 Apr 2022 10:16:57 +02:00

x86/cpu: Remove CONFIG_X86_SMAP and "nosmap"

Those were added as part of the SMAP enablement but SMAP is currently an integral part of kernel proper and there's no need to disable it anymore.

Rip out that functionality. Leave --uaccess default on for objtool as this is what objtool should do by default anyway.

If still needed - clearcpuid=smap.

---
 Documentation/admin-guide/kernel-parameters.txt |  2 +-
 Documentation/x86/cpuinfo.rst                   |  5 +--
 arch/x86/Kconfig                                | 11 +-------
 arch/x86/include/asm/disabled-features.h        |  8 +-----
 arch/x86/include/asm/smap.h                     | 24 +----------------
 arch/x86/kernel/cpu/common.c                    | 15 +----------
 scripts/Makefile.build                          |  2 +-
 scripts/link-vmlinux.sh                         |  6 ++--
 tools/arch/x86/include/asm/disabled-features.h  |  8 +-----
 9 files changed, 10 insertions(+), 71 deletions(-)
Documentation/admin-guide/kernel-parameters.txt +1 -1
index a9f3d31..e0bb710 100644
@@ -3461,7 +3461,7 @@
 			noexec=on: enable non-executable mappings (default)
 			noexec=off: disable non-executable mappings
 
-	nosmap		[X86,PPC]
+	nosmap		[PPC]
 			Disable SMAP (Supervisor Mode Access Prevention)
 			even if it is supported by processor.
 
Documentation/x86/cpuinfo.rst +2 -3
index 5d54c39..12fbe2b 100644
@@ -140,9 +140,8 @@ from #define X86_FEATURE_UMIP (16*32 + 2).
 
 In addition, there exists a variety of custom command-line parameters that
 disable specific features. The list of parameters includes, but is not limited
-to, nofsgsbase, nosmap, and nosmep. 5-level paging can also be disabled using
-"no5lvl". SMAP and SMEP are disabled with the aforementioned parameters,
-respectively.
+to, nofsgsbase, and nosmep. 5-level paging can also be disabled using
+"no5lvl". SMEP is disabled with the aforementioned parameter.
 
 e: The feature was known to be non-functional.
 ----------------------------------------------
arch/x86/Kconfig +0 -11
index b0142e0..5bc8bee 100644
@@ -1816,17 +1816,6 @@ config ARCH_RANDOM
 	  If supported, this is a high bandwidth, cryptographically
 	  secure hardware random number generator.
 
-config X86_SMAP
-	def_bool y
-	prompt "Supervisor Mode Access Prevention" if EXPERT
-	help
-	  Supervisor Mode Access Prevention (SMAP) is a security
-	  feature in newer Intel processors.  There is a small
-	  performance cost if this enabled and turned on; there is
-	  also a small increase in the kernel size if this is enabled.
-
-	  If unsure, say Y.
-
 config X86_UMIP
 	def_bool y
 	prompt "User Mode Instruction Prevention" if EXPERT
arch/x86/include/asm/disabled-features.h +1 -7
index 1231d63..1ae0fab 100644
@@ -10,12 +10,6 @@
  * cpu_feature_enabled().
  */
 
-#ifdef CONFIG_X86_SMAP
-# define DISABLE_SMAP	0
-#else
-# define DISABLE_SMAP	(1<<(X86_FEATURE_SMAP & 31))
-#endif
-
 #ifdef CONFIG_X86_UMIP
 # define DISABLE_UMIP	0
 #else
@@ -80,7 +74,7 @@
 #define DISABLED_MASK6	0
 #define DISABLED_MASK7	(DISABLE_PTI)
 #define DISABLED_MASK8	0
-#define DISABLED_MASK9	(DISABLE_SMAP|DISABLE_SGX)
+#define DISABLED_MASK9	(DISABLE_SGX)
 #define DISABLED_MASK10	0
 #define DISABLED_MASK11	0
 #define DISABLED_MASK12	0
arch/x86/include/asm/smap.h +0 -24
index d17b398..bab4903 100644
@@ -19,25 +19,14 @@
 
 #ifdef __ASSEMBLY__
 
-#ifdef CONFIG_X86_SMAP
-
 #define ASM_CLAC \
 	ALTERNATIVE "", __ASM_CLAC, X86_FEATURE_SMAP
 
 #define ASM_STAC \
 	ALTERNATIVE "", __ASM_STAC, X86_FEATURE_SMAP
 
-#else /* CONFIG_X86_SMAP */
-
-#define ASM_CLAC
-#define ASM_STAC
-
-#endif /* CONFIG_X86_SMAP */
-
 #else /* __ASSEMBLY__ */
 
-#ifdef CONFIG_X86_SMAP
-
 static __always_inline void clac(void)
 {
 	/* Note: a barrier is implicit in alternative() */
@@ -76,19 +65,6 @@ static __always_inline void smap_restore(unsigned long flags)
 #define ASM_STAC \
 	ALTERNATIVE("", __ASM_STAC, X86_FEATURE_SMAP)
 
-#else /* CONFIG_X86_SMAP */
-
-static inline void clac(void) { }
-static inline void stac(void) { }
-
-static inline unsigned long smap_save(void) { return 0; }
-static inline void smap_restore(unsigned long flags) { }
-
-#define ASM_CLAC
-#define ASM_STAC
-
-#endif /* CONFIG_X86_SMAP */
-
 #endif /* __ASSEMBLY__ */
 
 #endif /* _ASM_X86_SMAP_H */
arch/x86/kernel/cpu/common.c +1 -14
index c71d107..747df07 100644
@@ -382,13 +382,6 @@ static __always_inline void setup_smep(struct cpuinfo_x86 *c)
 		cr4_set_bits(X86_CR4_SMEP);
 }
 
-static __init int setup_disable_smap(char *arg)
-{
-	setup_clear_cpu_cap(X86_FEATURE_SMAP);
-	return 1;
-}
-__setup("nosmap", setup_disable_smap);
-
 static __always_inline void setup_smap(struct cpuinfo_x86 *c)
 {
 	unsigned long eflags = native_save_fl();
@@ -396,14 +389,8 @@ static __always_inline void setup_smap(struct cpuinfo_x86 *c)
 	/* This should have been cleared long ago */
 	BUG_ON(eflags & X86_EFLAGS_AC);
 
-	if (cpu_has(c, X86_FEATURE_SMAP)) {
-#ifdef CONFIG_X86_SMAP
+	if (cpu_has(c, X86_FEATURE_SMAP))
 		cr4_set_bits(X86_CR4_SMAP);
-#else
-		clear_cpu_cap(c, X86_FEATURE_SMAP);
-		cr4_clear_bits(X86_CR4_SMAP);
-#endif
-	}
 }
 
 static __always_inline void setup_umip(struct cpuinfo_x86 *c)
scripts/Makefile.build +1 -1
index 9717e6f..7e7aa1d 100644
@@ -233,7 +233,7 @@ objtool_args =								\
 	$(if $(CONFIG_FRAME_POINTER),, --no-fp)				\
 	$(if $(CONFIG_GCOV_KERNEL)$(CONFIG_LTO_CLANG), --no-unreachable)\
 	$(if $(CONFIG_RETPOLINE), --retpoline)				\
-	$(if $(CONFIG_X86_SMAP), --uaccess)				\
+	--uaccess							\
 	$(if $(CONFIG_FTRACE_MCOUNT_USE_OBJTOOL), --mcount)		\
 	$(if $(CONFIG_SLS), --sls)
 
scripts/link-vmlinux.sh +3 -3
index 20f4450..3a2fffd 100755
@@ -146,9 +146,9 @@ objtool_link()
 		if is_enabled CONFIG_RETPOLINE; then
 			objtoolopt="${objtoolopt} --retpoline"
 		fi
-		if is_enabled CONFIG_X86_SMAP; then
-			objtoolopt="${objtoolopt} --uaccess"
-		fi
+
+		objtoolopt="${objtoolopt} --uaccess"
+
 		if is_enabled CONFIG_SLS; then
 			objtoolopt="${objtoolopt} --sls"
 		fi
tools/arch/x86/include/asm/disabled-features.h +1 -7
index 1231d63..1ae0fab 100644
@@ -10,12 +10,6 @@
  * cpu_feature_enabled().
  */
 
-#ifdef CONFIG_X86_SMAP
-# define DISABLE_SMAP	0
-#else
-# define DISABLE_SMAP	(1<<(X86_FEATURE_SMAP & 31))
-#endif
-
 #ifdef CONFIG_X86_UMIP
 # define DISABLE_UMIP	0
 #else
@@ -80,7 +74,7 @@
 #define DISABLED_MASK6	0
 #define DISABLED_MASK7	(DISABLE_PTI)
 #define DISABLED_MASK8	0
-#define DISABLED_MASK9	(DISABLE_SMAP|DISABLE_SGX)
+#define DISABLED_MASK9	(DISABLE_SGX)
 #define DISABLED_MASK10	0
 #define DISABLED_MASK11	0
 #define DISABLED_MASK12	0