Skip to contentSkip to conversation

ARM: dts: imx6qdl-phytec: add missing pmic MFD subdevices

PATCH Applied Andrej Picej 2 participants 3 messages Jan 28, 2022 – Feb 11, 2022

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/2 ARM: dts: imx6qdl-phytec: add missing pmic MFD subdevices

phyFLEX PMIC DA9063 has also RTC and watchdog support. Add both MFD subdevices so they can be used.

---
Changes in v2:
- fix subject to follow ARM: dts: imx6qdl-phytec: ... style
- use MFD (capital letters) in subject and commit message
- change rtc and watchdog lebel/node name to follow more standard naming scheme

---
 arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +8 -0
index f3236204cb5a..c6ec71f6f034 100644
@@ -205,6 +205,14 @@ vdd_mx6_high_reg: ldo11 {
 				regulator-always-on;
 			};
 		};
+
+		da9063_rtc: rtc {
+			compatible = "dlg,da9063-rtc";
+		};
+
+		da9063_wdog: watchdog {
+			compatible = "dlg,da9063-watchdog";
+		};
 	};
 };
 
Signature · 1 line
2.25.1
#1 lore raw

PATCH v2 2/2 ARM: dts: imx6qdl-phytec: handle unneeded MFD-subdevices correctly

From: Yunus Bas <[email protected]>

The proper way to handle partly used MFD devices are to describe all MFD subdevices in the devicetree and disable the not used ones. This suppresses any warnings that may arise as a result.

---
Changes in v2:
- use ARM: dts: imx6qdl-phytec: ... as subject prefix

---
 arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi      |  5 +++++
 arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi | 10 ++++++++++
 2 files changed, 15 insertions(+)
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +5 -0
index c6ec71f6f034..1f2ba6f6254e 100644
@@ -213,6 +213,11 @@ da9063_rtc: rtc {
 		da9063_wdog: watchdog {
 			compatible = "dlg,da9063-watchdog";
 		};
+
+		onkey {
+			compatible = "dlg,da9063-onkey";
+			status = "disabled";
+		};
 	};
 };
 
arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi +10 -0
index 94b254bfd054..28a805384668 100644
@@ -116,6 +116,16 @@ watchdog {
 			dlg,use-sw-pm;
 		};
 
+		thermal {
+			compatible = "dlg,da9062-thermal";
+			status = "disabled";
+		};
+
+		gpio {
+			compatible = "dlg,da9062-gpio";
+			status = "disabled";
+		};
+
 		regulators {
 			vdd_arm: buck1 {
 				regulator-name = "vdd_arm";
Signature · 1 line
2.25.1