package/freescale-imx: Add installation of easrc-imx8mn.bin firmware
PATCH 1/1 package/freescale-imx: Add installation of easrc-imx8mn.bin firmware
The easrc firmware is used for audio resampling. The firmware for now exists only for imx8mn device
Signed-off-by Michael Trimarchi <[email protected]>
--- package/freescale-imx/firmware-imx/Config.in | 4 ++++ package/freescale-imx/firmware-imx/firmware-imx.mk | 12 ++++++++++++ 2 files changed, 16 insertions(+)
package/freescale-imx/firmware-imx/Config.in +4 -0
@@ -39,6 +39,10 @@ config BR2_PACKAGE_FIRMWARE_IMX_NEEDS_HDMI_FW bool default y if BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M +config BR2_PACKAGE_FIRMWARE_IMX_NEEDS_EASRC_FW + bool + default y if BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN + config BR2_PACKAGE_FIRMWARE_IMX_NEEDS_EPDC_FW bool default y if BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX6Q
package/freescale-imx/firmware-imx/firmware-imx.mk +12 -0
@@ -113,6 +113,17 @@ define FIRMWARE_IMX_INSTALL_IMAGE_HDMI_FW endef endif +# +# EASRC firmware +# + +ifeq ($(BR2_PACKAGE_FIRMWARE_IMX_NEEDS_EASRC_FW),y) +define FIRMWARE_IMX_INSTALL_TARGET_EASRC_FW + mkdir -p $(TARGET_DIR)/lib/firmware/imx + cp -r $(@D)/firmware/easrc $(TARGET_DIR)/lib/firmware/imx +endef +endif + # # EPDC firmware #
@@ -160,6 +171,7 @@ define FIRMWARE_IMX_INSTALL_IMAGES_CMDS endef define FIRMWARE_IMX_INSTALL_TARGET_CMDS + $(FIRMWARE_IMX_INSTALL_TARGET_EASRC_FW) $(FIRMWARE_IMX_INSTALL_TARGET_EPDC_FW) $(FIRMWARE_IMX_INSTALL_TARGET_SDMA_FW) $(FIRMWARE_IMX_INSTALL_TARGET_VPU_FW)
Signature · 6 lines
2.25.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Hi
Quoted 48 lines · Michael Trimarchi
The easrc firmware is used for audio resampling. The firmware for now exists only for imx8mn device
Signed-off-by Michael Trimarchi <[email protected]>--- package/freescale-imx/firmware-imx/Config.in | 4 ++++ package/freescale-imx/firmware-imx/firmware-imx.mk | 12 ++++++++++++ 2 files changed, 16 insertions(+)package/freescale-imx/firmware-imx/Config.in +4
-0@@ -39,6 +39,10 @@ config BR2_PACKAGE_FIRMWARE_IMX_NEEDS_HDMI_FW bool default y if BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M +config BR2_PACKAGE_FIRMWARE_IMX_NEEDS_EASRC_FW + bool + default y if BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN + config BR2_PACKAGE_FIRMWARE_IMX_NEEDS_EPDC_FW bool default y if BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX6Qpackage/freescale-imx/firmware-imx/firmware-imx.mk +11
-0@@ -113,6 +113,17 @@ define FIRMWARE_IMX_INSTALL_IMAGE_HDMI_FW endef endif +# +# EASRC firmware +# + +ifeq ($(BR2_PACKAGE_FIRMWARE_IMX_NEEDS_EASRC_FW),y) +define FIRMWARE_IMX_INSTALL_TARGET_EASRC_FW + mkdir -p $(TARGET_DIR)/lib/firmware/imx + cp -r $(@D)/firmware/easrc $(TARGET_DIR)/lib/firmware/imx +endef +endif + # # EPDC firmware #
package/freescale-imx/firmware-imx/firmware-imx.mk define FIRMWARE_IMX_INSTALL_IMAGES_CMDS · line 177
Quoted 7 lines
package/freescale-imx/firmware-imx/firmware-imx.mk +1
-0@@ -160,6 +171,7 @@ define FIRMWARE_IMX_INSTALL_IMAGES_CMDS endef define FIRMWARE_IMX_INSTALL_TARGET_CMDS + $(FIRMWARE_IMX_INSTALL_TARGET_EASRC_FW) $(FIRMWARE_IMX_INSTALL_TARGET_EPDC_FW) $(FIRMWARE_IMX_INSTALL_TARGET_SDMA_FW) $(FIRMWARE_IMX_INSTALL_TARGET_VPU_FW)
Is something missing here?
Michael
Quoted 3 lines
--
2.25.1
Signature · 15 lines
Michael Nazzareno Trimarchi Co-Founder & Chief Executive Officer M. +39 347 913 2170 [email protected] __________________________________ Amarula Solutions BV Joop Geesinkweg 125, 1114 AB, Amsterdam, NL T. +31 (0)85 111 9172 [email protected] www.amarulasolutions.com _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Quoted 54 lines · Michael Nazzareno Trimarchi
Hi
Quoted 50 lines · Michael Trimarchi
The easrc firmware is used for audio resampling. The firmware for now exists only for imx8mn device
Signed-off-by Michael Trimarchi <[email protected]>--- package/freescale-imx/firmware-imx/Config.in | 4 ++++ package/freescale-imx/firmware-imx/firmware-imx.mk | 12 ++++++++++++ 2 files changed, 16 insertions(+)package/freescale-imx/firmware-imx/Config.in +4
-0@@ -39,6 +39,10 @@ config BR2_PACKAGE_FIRMWARE_IMX_NEEDS_HDMI_FW bool default y if BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M +config BR2_PACKAGE_FIRMWARE_IMX_NEEDS_EASRC_FW + bool + default y if BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN + config BR2_PACKAGE_FIRMWARE_IMX_NEEDS_EPDC_FW bool default y if BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX6Qpackage/freescale-imx/firmware-imx/firmware-imx.mk +11
-0@@ -113,6 +113,17 @@ define FIRMWARE_IMX_INSTALL_IMAGE_HDMI_FW endef endif +# +# EASRC firmware +# + +ifeq ($(BR2_PACKAGE_FIRMWARE_IMX_NEEDS_EASRC_FW),y) +define FIRMWARE_IMX_INSTALL_TARGET_EASRC_FW + mkdir -p $(TARGET_DIR)/lib/firmware/imx + cp -r $(@D)/firmware/easrc $(TARGET_DIR)/lib/firmware/imx +endef +endif + # # EPDC firmware #@@ -160,6 +171,7 @@ define FIRMWARE_IMX_INSTALL_IMAGES_CMDS endef
Quoted 8 lines
package/freescale-imx/firmware-imx/firmware-imx.mk define FIRMWARE_IMX_INSTALL_IMAGES_CMDS · line 177
Quoted 5 lines
package/freescale-imx/firmware-imx/firmware-imx.mk +1
-0define FIRMWARE_IMX_INSTALL_TARGET_CMDS + $(FIRMWARE_IMX_INSTALL_TARGET_EASRC_FW) $(FIRMWARE_IMX_INSTALL_TARGET_EPDC_FW) $(FIRMWARE_IMX_INSTALL_TARGET_SDMA_FW) $(FIRMWARE_IMX_INSTALL_TARGET_VPU_FW)Is something missing here?
No, it's just that patches that are not reviewed or version bumps or fixes can
take a long time before they get applied, because there's such a huge stream of incoming patches.
Anyway, applied to master, thanks.
Regards,
Arnout
Quoted 7 lines
Michael
Quoted 3 lines
--
2.25.1
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot