drm/panel-simple: Add a timing for the Raspberry Pi 7" panel
Subsystems (3)
PATCH 1/1 drm/panel-simple: Add a timing for the Raspberry Pi 7" panel
From: Dave Stevenson <[email protected]>
The Raspberry Pi 7" 800x480 panel uses a Toshiba TC358762 DSI to DPI bridge chip, so there is a requirement for the timings to be specified for the end panel. Add such a definition.
Signed-off-by Dave Stevenson <[email protected]>
Signed-off-by Detlev Casanova <[email protected]>
--- drivers/gpu/drm/panel/panel-simple.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)
drivers/gpu/drm/panel/panel-simple.c +28 -0
@@ -3013,6 +3013,31 @@ static const struct panel_desc qishenglong_gopher2b_lcd = { .connector_type = DRM_MODE_CONNECTOR_DPI, }; +static const struct drm_display_mode raspberrypi_7inch_mode = { + .clock =25979400 /1000 , + .hdisplay =800 , + .hsync_start =800 +2 , + .hsync_end =800 +2 +2 , + .htotal =800 +2 +2 +46 , + .vdisplay =480 , + .vsync_start =480 +7 , + .vsync_end =480 +7 +2 , + .vtotal =480 +7 +2 +21 , + .flags =DRM_MODE_FLAG_NVSYNC |DRM_MODE_FLAG_NHSYNC , +}; + +static const struct panel_desc raspberrypi_7inch = { + .modes = &raspberrypi_7inch_mode, + .num_modes =1 , + .bpc =8 , + .size = { + .width =154 , + .height =86 , + }, + .bus_format =MEDIA_BUS_FMT_RGB888_1X24 , + .connector_type =DRM_MODE_CONNECTOR_DSI , +}; +static const struct display_timing rocktech_rk070er9427_timing = { .pixelclock = {26400000 ,33300000 ,46800000 }, .hactive = {800 ,800 ,800 },
@@ -3958,6 +3983,9 @@ static const struct of_device_id platform_of_match[] = { }, { .compatible = "qishenglong,gopher2b-lcd", .data = &qishenglong_gopher2b_lcd, + }, { + .compatible = "raspberrypi,7inch-dsi", + .data = &raspberrypi_7inch, }, { .compatible = "rocktech,rk070er9427", .data = &rocktech_rk070er9427,
Signature · 1 line
2.35.0