ACPI: device_sysfs: Add sysfs support for _PLD
Subsystems (2)
PATCH v4 1/1 ACPI: device_sysfs: Add sysfs support for _PLD
When ACPI table includes _PLD fields for a device, create a new directory (pld) in sysfs to share _PLD fields.
Signed-off-by Won Chung <[email protected]>
--- Documentation/ABI/testing/sysfs-bus-acpi | 101 +++++++++++++++++++++++ drivers/acpi/device_sysfs.c | 55 ++++++++++++ include/acpi/acpi_bus.h | 1 + 3 files changed, 157 insertions(+)
Documentation/ABI/testing/sysfs-bus-acpi +101 -0
@@ -96,3 +96,104 @@ Description: hardware, if the _HRV control method is present. It is mostly useful for non-PCI devices because lspci can list the hardware version for PCI devices. + +What: /sys/bus/acpi/devices/.../pld/ +Date: Feb, 2022 +Contact: Won Chung <[email protected]> +Description: + This directory contains the output of the device object's _PLD + control method, if present. This information provides details + on physical location of a device. + +What: /sys/bus/acpi/devices/.../pld/revision +Date: Feb, 2022 +Contact: Won Chung <[email protected]> +Description: + The current revision is 0x2. + +What: /sys/bus/acpi/devices/.../pld/group_token +Date: Feb, 2022 +Contact: Won Chung <[email protected]> +Description: + Unique numerical value identifying a group. + +What: /sys/bus/acpi/devices/.../pld/group_position +Date: Feb, 2022 +Contact: Won Chung <[email protected]> +Description: + Identifies this device connection point’s position in the group. + +What: /sys/bus/acpi/devices/.../pld/user_visible +Date: Feb, 2022 +Contact: Won Chung <[email protected]> +Description: + Set if the device connection point can be seen by the user + without disassembly. + +What: /sys/bus/acpi/devices/.../pld/dock +Date: Feb, 2022 +Contact: Won Chung <[email protected]> +Description: + Set if the device connection point resides in a docking station + or port replicator. + +What: /sys/bus/acpi/devices/.../pld/bay +Date: Feb, 2022 +Contact: Won Chung <[email protected]> +Description: + Set if describing a device in a bay or if device connection + point is a bay. + +What: /sys/bus/acpi/devices/.../pld/lid +Date: Feb, 2022 +Contact: Won Chung <[email protected]> +Description: + Set if this device connection point resides on the lid of + laptop system. + +What: /sys/bus/acpi/devices/.../pld/panel +Date: Feb, 2022 +Contact: Won Chung <[email protected]> +Description: + Describes which panel surface of the system’s housing the + device connection point resides on: + 0 - Top + 1 - Bottom + 2 - Left + 3 - Right + 4 - Front + 5 - Back + 6 - Unknown (Vertical Position and Horizontal Position will be + ignored) + +What: /sys/bus/acpi/devices/.../pld/vertical_position +Date: Feb, 2022 +Contact: Won Chung <[email protected]> +Description: + 0 - Upper + 1 - Center + 2 - Lower + +What: /sys/bus/acpi/devices/.../pld/horizontal_position +Date: Feb, 2022 +Contact: Won Chung <[email protected]> +Description: + 0 - Leftmost + Higher numbers going toward the right. + +What: /sys/bus/acpi/devices/.../pld/shape +Date: Feb, 2022 +Contact: Won Chung <[email protected]> +Description: + Describes the shape of the device connection point. + 0 - Round + 1 - Oval + 2 - Square + 3 - Vertical Rectangle + 4 - Horizontal Rectangle + 5 - Vertical Trapezoid + 6 - Horizontal Trapezoid + 7 - Unknown - Shape rendered as a Rectangle with dotted lines + 8 - Chamfered + 15:9 - Reserved +
drivers/acpi/device_sysfs.c +55 -0
71 lines not on this page · raw message
include/acpi/acpi_bus.h +1 -0
@@ -381,6 +381,7 @@ struct acpi_device {struct acpi_hotplug_context *hp;struct acpi_driver *driver;const struct acpi_gpio_mapping *driver_gpios; +struct acpi_pld_info *pld;void *driver_data;struct device dev;unsigned int physical_node_count;
Signature · 1 line
2.35.0.rc2.247.g8bbb082509-goog