Skip to contentSkip to conversation

drivers: serial: Make sure we really return a serial device

PATCH Superseded Mark Kettenis 3 participants 9 messages Feb 5, 2022 – Feb 21, 2022

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drivers: serial: Make sure we really return a serial device

The stdout-path property in the device tree does not necessarily point at a serial device. The code that binds the device if it isn't marked to be bound before relocation does not check whether the device really is a serial device. So check that its uclass is UCLASS_SERIAL before probing it.

---
 drivers/serial/serial-uclass.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/serial/serial-uclass.c +2 -1
index 96a1cb65ba..931a90bdbd 100644
@@ -66,7 +66,8 @@ static int serial_check_stdout(const void *blob, struct udevice **devp)
 	 */
 	if (node > 0 && !lists_bind_fdt(gd->dm_root, offset_to_ofnode(node),
 					devp, NULL, false)) {
-		if (!device_probe(*devp))
+		if (device_get_uclass_id(*devp) == UCLASS_SERIAL &&
+		    !device_probe(*devp))
 			return 0;
 	}
 
Signature · 1 line
2.34.1
#1 lore raw

Hi Mark,

Quoted 11 lines · Mark Kettenis

The stdout-path property in the device tree does not necessarily point at a serial device. The code that binds the device if it isn't marked to be bound before relocation does not check whether the device really is a serial device. So check that its uclass is UCLASS_SERIAL before probing it.

---
 drivers/serial/serial-uclass.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

This would be better as an assert() to avoid code bloat. Under what circumstances was this wrong?

Quoted 16 lines
drivers/serial/serial-uclass.c +2 -2
index 96a1cb65ba..931a90bdbd 100644
@@ -66,7 +66,8 @@ static int serial_check_stdout(const void *blob, struct udevice **devp)
         */
        if (node > 0 && !lists_bind_fdt(gd->dm_root, offset_to_ofnode(node),
                                        devp, NULL, false)) {
-               if (!device_probe(*devp))
+               if (device_get_uclass_id(*devp) == UCLASS_SERIAL &&
+                   !device_probe(*devp))
                        return 0;
        }
 
--
Quoted 2 lines

2.34.1

Regards,
Simon

#2 lore raw
Quoted 13 lines

From: Simon Glass <[email protected]>
Date: Mon, 7 Feb 2022 13:22:22 -0700

Hi Mark,

Quoted 7 lines · Mark Kettenis

The stdout-path property in the device tree does not necessarily point at a serial device. The code that binds the device if it isn't marked to be bound before relocation does not check whether the device really is a serial device. So check that its uclass is UCLASS_SERIAL before probing it.

Quoted 7 lines
Quoted 4 lines
---
 drivers/serial/serial-uclass.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

This would be better as an assert() to avoid code bloat. Under what circumstances was this wrong?

I'm passing a debive tree to U-Boot that has stdout-path set to "/chosen/framebuffer" to indicate that output should go to the framebuffer instead of the serial port. This is a node with a "simple-framebuffer" compatible, which means the list_bind_fdt() call binds the simple_video (simplefb.c) driver and stores a pointer to its struct udevice into devp. I've verified that the uclass is indeed UCLASS_VIDEO at that point with my device tree.

Since the function returns 0, the caller of this function thinks we returned a valid UCLASS_SERIAL device and when u-boot starts using it as such it crashes (without printing anything since there is no console output device yet).

So an assert won't work. We should simply return an error an run the fallback code below that looks for the serial port with the specified index. That way U-Boot continues to work as expected (with output on both the serial port and the framebuffer). But once my OS is running, it knows to pick the framebuffer console and all's fine.

I haven't looked at the binary growth, but it can't be much. But if you think it is a problem, maybe we should make this code that binds the console driver optional?

Thanks,

Mark

Quoted 21 lines
Quoted 15 lines
drivers/serial/serial-uclass.c +2 -2
index 96a1cb65ba..931a90bdbd 100644
@@ -66,7 +66,8 @@ static int serial_check_stdout(const void *blob, struct udevice **devp)
         */
        if (node > 0 && !lists_bind_fdt(gd->dm_root, offset_to_ofnode(node),
                                        devp, NULL, false)) {
-               if (!device_probe(*devp))
+               if (device_get_uclass_id(*devp) == UCLASS_SERIAL &&
+                   !device_probe(*devp))
                        return 0;
        }
 
--
Quoted 2 lines

2.34.1

Regards,
Simon

#3 lore raw

Hi Mark,

Quoted 41 lines · Mark Kettenis
Quoted 14 lines

From: Simon Glass <[email protected]>
Date: Mon, 7 Feb 2022 13:22:22 -0700

Hi Mark,

Quoted 7 lines · Mark Kettenis

The stdout-path property in the device tree does not necessarily point at a serial device. The code that binds the device if it isn't marked to be bound before relocation does not check whether the device really is a serial device. So check that its uclass is UCLASS_SERIAL before probing it.

Quoted 7 lines
Quoted 4 lines
---
 drivers/serial/serial-uclass.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

This would be better as an assert() to avoid code bloat. Under what circumstances was this wrong?

I'm passing a debive tree to U-Boot that has stdout-path set to "/chosen/framebuffer" to indicate that output should go to the framebuffer instead of the serial port. This is a node with a "simple-framebuffer" compatible, which means the list_bind_fdt() call binds the simple_video (simplefb.c) driver and stores a pointer to its struct udevice into devp. I've verified that the uclass is indeed UCLASS_VIDEO at that point with my device tree.

Since the function returns 0, the caller of this function thinks we returned a valid UCLASS_SERIAL device and when u-boot starts using it as such it crashes (without printing anything since there is no console output device yet).

So an assert won't work. We should simply return an error an run the fallback code below that looks for the serial port with the specified index. That way U-Boot continues to work as expected (with output on both the serial port and the framebuffer). But once my OS is running, it knows to pick the framebuffer console and all's fine.

Quoted 3 lines

I haven't looked at the binary growth, but it can't be much. But if you think it is a problem, maybe we should make this code that binds the console driver optional?

OK I see. It likely isn't much, but in SPL it is still growth. Worth checking.

Can you perhaps create a 'console' alias so that the line above finds the correct one?

But I'm a bit unsure of how you get the serial console to work if serial_check_stdout() fails? Is the serial driver not marked for pre-reloc use? There is something odd going on.

Regards,
Simon

#4 lore raw
Quoted 2 lines

From: Simon Glass <[email protected]>
Date: Fri, 18 Feb 2022 17:21:13 -0700

Hi Simon,

Quoted 44 lines

Hi Mark,

Quoted 41 lines · Mark Kettenis
Quoted 14 lines

From: Simon Glass <[email protected]>
Date: Mon, 7 Feb 2022 13:22:22 -0700

Hi Mark,

Quoted 7 lines · Mark Kettenis

The stdout-path property in the device tree does not necessarily point at a serial device. The code that binds the device if it isn't marked to be bound before relocation does not check whether the device really is a serial device. So check that its uclass is UCLASS_SERIAL before probing it.

Quoted 7 lines
Quoted 4 lines
---
 drivers/serial/serial-uclass.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

This would be better as an assert() to avoid code bloat. Under what circumstances was this wrong?

I'm passing a debive tree to U-Boot that has stdout-path set to "/chosen/framebuffer" to indicate that output should go to the framebuffer instead of the serial port. This is a node with a "simple-framebuffer" compatible, which means the list_bind_fdt() call binds the simple_video (simplefb.c) driver and stores a pointer to its struct udevice into devp. I've verified that the uclass is indeed UCLASS_VIDEO at that point with my device tree.

Since the function returns 0, the caller of this function thinks we returned a valid UCLASS_SERIAL device and when u-boot starts using it as such it crashes (without printing anything since there is no console output device yet).

So an assert won't work. We should simply return an error an run the fallback code below that looks for the serial port with the specified index. That way U-Boot continues to work as expected (with output on both the serial port and the framebuffer). But once my OS is running, it knows to pick the framebuffer console and all's fine.

Quoted 6 lines
Quoted 3 lines

I haven't looked at the binary growth, but it can't be much. But if you think it is a problem, maybe we should make this code that binds the console driver optional?

OK I see. It likely isn't much, but in SPL it is still growth. Worth checking.

before:

$ size u-boot
text    data    bss     dec     he
442903  27700   13448   484051  762d3

after:

$ size u-boot
text    data    bss     dec     hex
442925  27700   13448   484073  762e9

So that's 22 bytes.

Thew growth in serial-uclass.o is a bit smaller; only 16 byes.

Quoted 2 lines

Can you perhaps create a 'console' alias so that the line above finds the correct one?

Probably. But none of the Linux device trees provide a 'console' alias so this seems to be a U-Boot convention. And it doesn't actually fix the bug; it just works around it.

Quoted 3 lines

But I'm a bit unsure of how you get the serial console to work if serial_check_stdout() fails? Is the serial driver not marked for pre-reloc use? There is something odd going on.

The serial driver is marked for pre-reloc use. When serial_check_stdout() fails the code at the tail end of serial_find_console_or_panic() runs and finds the serial device at index 0 and uses that.

The "something odd" that's going on here is that I set "/chosen/stdout-path" to point to the framebuffer instead of a serial port. But nowhere does the device tree specification say that "stdout-path" has to point at a serial device. So U-Boot shouldn't crash when this isn't the case.

Cheers,

Mark

#5 lore raw

Hi Mark,

Quoted 89 lines · Mark Kettenis
Quoted 3 lines

From: Simon Glass <[email protected]>
Date: Fri, 18 Feb 2022 17:21:13 -0700

Hi Simon,

Quoted 44 lines

Hi Mark,

Quoted 41 lines · Mark Kettenis
Quoted 14 lines

From: Simon Glass <[email protected]>
Date: Mon, 7 Feb 2022 13:22:22 -0700

Hi Mark,

Quoted 7 lines · Mark Kettenis

The stdout-path property in the device tree does not necessarily point at a serial device. The code that binds the device if it isn't marked to be bound before relocation does not check whether the device really is a serial device. So check that its uclass is UCLASS_SERIAL before probing it.

Quoted 7 lines
Quoted 4 lines
---
 drivers/serial/serial-uclass.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

This would be better as an assert() to avoid code bloat. Under what circumstances was this wrong?

I'm passing a debive tree to U-Boot that has stdout-path set to "/chosen/framebuffer" to indicate that output should go to the framebuffer instead of the serial port. This is a node with a "simple-framebuffer" compatible, which means the list_bind_fdt() call binds the simple_video (simplefb.c) driver and stores a pointer to its struct udevice into devp. I've verified that the uclass is indeed UCLASS_VIDEO at that point with my device tree.

Since the function returns 0, the caller of this function thinks we returned a valid UCLASS_SERIAL device and when u-boot starts using it as such it crashes (without printing anything since there is no console output device yet).

So an assert won't work. We should simply return an error an run the fallback code below that looks for the serial port with the specified index. That way U-Boot continues to work as expected (with output on both the serial port and the framebuffer). But once my OS is running, it knows to pick the framebuffer console and all's fine.

Quoted 6 lines
Quoted 3 lines

I haven't looked at the binary growth, but it can't be much. But if you think it is a problem, maybe we should make this code that binds the console driver optional?

OK I see. It likely isn't much, but in SPL it is still growth. Worth checking.

before:

$ size u-boot
text    data    bss     dec     he
442903  27700   13448   484051  762d3

after:

$ size u-boot
text    data    bss     dec     hex
442925  27700   13448   484073  762e9

So that's 22 bytes.

Thew growth in serial-uclass.o is a bit smaller; only 16 byes.

Quoted 2 lines

Can you perhaps create a 'console' alias so that the line above finds the correct one?

Probably. But none of the Linux device trees provide a 'console' alias so this seems to be a U-Boot convention. And it doesn't actually fix the bug; it just works around it.

Quoted 3 lines

But I'm a bit unsure of how you get the serial console to work if serial_check_stdout() fails? Is the serial driver not marked for pre-reloc use? There is something odd going on.

The serial driver is marked for pre-reloc use. When serial_check_stdout() fails the code at the tail end of serial_find_console_or_panic() runs and finds the serial device at index 0 and uses that.

Quoted 5 lines

The "something odd" that's going on here is that I set "/chosen/stdout-path" to point to the framebuffer instead of a serial port. But nowhere does the device tree specification say that "stdout-path" has to point at a serial device. So U-Boot shouldn't crash when this isn't the case.

OK, I think this is the sort of info that should have been in your commit message.

However, looking at this, the code you are changing should not be there now. It was added for backwards-compatibility reasons.

Let's remove the lists_bind_fdt() call and rely on people doing the right thing now.

Regards,
Simon

#6 lore raw
Quoted 101 lines

From: Simon Glass <[email protected]>
Date: Sat, 19 Feb 2022 15:21:19 -0700

Hi Mark,

Quoted 89 lines · Mark Kettenis
Quoted 3 lines

From: Simon Glass <[email protected]>
Date: Fri, 18 Feb 2022 17:21:13 -0700

Hi Simon,

Quoted 44 lines

Hi Mark,

Quoted 41 lines · Mark Kettenis
Quoted 14 lines

From: Simon Glass <[email protected]>
Date: Mon, 7 Feb 2022 13:22:22 -0700

Hi Mark,

Quoted 7 lines · Mark Kettenis

The stdout-path property in the device tree does not necessarily point at a serial device. The code that binds the device if it isn't marked to be bound before relocation does not check whether the device really is a serial device. So check that its uclass is UCLASS_SERIAL before probing it.

Quoted 7 lines
Quoted 4 lines
---
 drivers/serial/serial-uclass.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

This would be better as an assert() to avoid code bloat. Under what circumstances was this wrong?

I'm passing a debive tree to U-Boot that has stdout-path set to "/chosen/framebuffer" to indicate that output should go to the framebuffer instead of the serial port. This is a node with a "simple-framebuffer" compatible, which means the list_bind_fdt() call binds the simple_video (simplefb.c) driver and stores a pointer to its struct udevice into devp. I've verified that the uclass is indeed UCLASS_VIDEO at that point with my device tree.

Since the function returns 0, the caller of this function thinks we returned a valid UCLASS_SERIAL device and when u-boot starts using it as such it crashes (without printing anything since there is no console output device yet).

So an assert won't work. We should simply return an error an run the fallback code below that looks for the serial port with the specified index. That way U-Boot continues to work as expected (with output on both the serial port and the framebuffer). But once my OS is running, it knows to pick the framebuffer console and all's fine.

Quoted 6 lines
Quoted 3 lines

I haven't looked at the binary growth, but it can't be much. But if you think it is a problem, maybe we should make this code that binds the console driver optional?

OK I see. It likely isn't much, but in SPL it is still growth. Worth checking.

before:

$ size u-boot
text    data    bss     dec     he
442903  27700   13448   484051  762d3

after:

$ size u-boot
text    data    bss     dec     hex
442925  27700   13448   484073  762e9

So that's 22 bytes.

Thew growth in serial-uclass.o is a bit smaller; only 16 byes.

Quoted 2 lines

Can you perhaps create a 'console' alias so that the line above finds the correct one?

Probably. But none of the Linux device trees provide a 'console' alias so this seems to be a U-Boot convention. And it doesn't actually fix the bug; it just works around it.

Quoted 3 lines

But I'm a bit unsure of how you get the serial console to work if serial_check_stdout() fails? Is the serial driver not marked for pre-reloc use? There is something odd going on.

The serial driver is marked for pre-reloc use. When serial_check_stdout() fails the code at the tail end of serial_find_console_or_panic() runs and finds the serial device at index 0 and uses that.

Quoted 5 lines

The "something odd" that's going on here is that I set "/chosen/stdout-path" to point to the framebuffer instead of a serial port. But nowhere does the device tree specification say that "stdout-path" has to point at a serial device. So U-Boot shouldn't crash when this isn't the case.

Quoted 8 lines

OK, I think this is the sort of info that should have been in your commit message.

However, looking at this, the code you are changing should not be there now. It was added for backwards-compatibility reasons.

Let's remove the lists_bind_fdt() call and rely on people doing the right thing now.

Right. I'm worrying a bit that this will break many boards. I was thinking in particular about boards like the raspberry pi where we use the device tree provided by the firmware. But on that the serial drivers have the DM_FLAG_PRE_RELOC flag set when OF_BOARD is defined, so that shouldn't be a problem.

But many other serial drivers don't set DM_FLAG_PRE_RELOC, or only set it when !OF_CONTROL. I checked a few of those and most of them don't seem to have the *-u-boot.dtsi files to add the necessary property to the nodes.

I still think we should fix the bug regardless of whether we remove the code somewhere in the near future.

#7 lore raw

Hi Mark,

Quoted 117 lines · Mark Kettenis
Quoted 102 lines

From: Simon Glass <[email protected]>
Date: Sat, 19 Feb 2022 15:21:19 -0700

Hi Mark,

Quoted 89 lines · Mark Kettenis
Quoted 3 lines

From: Simon Glass <[email protected]>
Date: Fri, 18 Feb 2022 17:21:13 -0700

Hi Simon,

Quoted 44 lines

Hi Mark,

Quoted 41 lines · Mark Kettenis
Quoted 14 lines

From: Simon Glass <[email protected]>
Date: Mon, 7 Feb 2022 13:22:22 -0700

Hi Mark,

Quoted 7 lines · Mark Kettenis

The stdout-path property in the device tree does not necessarily point at a serial device. The code that binds the device if it isn't marked to be bound before relocation does not check whether the device really is a serial device. So check that its uclass is UCLASS_SERIAL before probing it.

Quoted 7 lines
Quoted 4 lines
---
 drivers/serial/serial-uclass.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

This would be better as an assert() to avoid code bloat. Under what circumstances was this wrong?

I'm passing a debive tree to U-Boot that has stdout-path set to "/chosen/framebuffer" to indicate that output should go to the framebuffer instead of the serial port. This is a node with a "simple-framebuffer" compatible, which means the list_bind_fdt() call binds the simple_video (simplefb.c) driver and stores a pointer to its struct udevice into devp. I've verified that the uclass is indeed UCLASS_VIDEO at that point with my device tree.

Since the function returns 0, the caller of this function thinks we returned a valid UCLASS_SERIAL device and when u-boot starts using it as such it crashes (without printing anything since there is no console output device yet).

So an assert won't work. We should simply return an error an run the fallback code below that looks for the serial port with the specified index. That way U-Boot continues to work as expected (with output on both the serial port and the framebuffer). But once my OS is running, it knows to pick the framebuffer console and all's fine.

Quoted 6 lines
Quoted 3 lines

I haven't looked at the binary growth, but it can't be much. But if you think it is a problem, maybe we should make this code that binds the console driver optional?

OK I see. It likely isn't much, but in SPL it is still growth. Worth checking.

before:

$ size u-boot
text    data    bss     dec     he
442903  27700   13448   484051  762d3

after:

$ size u-boot
text    data    bss     dec     hex
442925  27700   13448   484073  762e9

So that's 22 bytes.

Thew growth in serial-uclass.o is a bit smaller; only 16 byes.

Quoted 2 lines

Can you perhaps create a 'console' alias so that the line above finds the correct one?

Probably. But none of the Linux device trees provide a 'console' alias so this seems to be a U-Boot convention. And it doesn't actually fix the bug; it just works around it.

Quoted 3 lines

But I'm a bit unsure of how you get the serial console to work if serial_check_stdout() fails? Is the serial driver not marked for pre-reloc use? There is something odd going on.

The serial driver is marked for pre-reloc use. When serial_check_stdout() fails the code at the tail end of serial_find_console_or_panic() runs and finds the serial device at index 0 and uses that.

Quoted 5 lines

The "something odd" that's going on here is that I set "/chosen/stdout-path" to point to the framebuffer instead of a serial port. But nowhere does the device tree specification say that "stdout-path" has to point at a serial device. So U-Boot shouldn't crash when this isn't the case.

Quoted 8 lines

OK, I think this is the sort of info that should have been in your commit message.

However, looking at this, the code you are changing should not be there now. It was added for backwards-compatibility reasons.

Let's remove the lists_bind_fdt() call and rely on people doing the right thing now.

Right. I'm worrying a bit that this will break many boards. I was thinking in particular about boards like the raspberry pi where we use the device tree provided by the firmware. But on that the serial drivers have the DM_FLAG_PRE_RELOC flag set when OF_BOARD is defined, so that shouldn't be a problem.

Quoted 7 lines

But many other serial drivers don't set DM_FLAG_PRE_RELOC, or only set it when !OF_CONTROL. I checked a few of those and most of them don't seem to have the *-u-boot.dtsi files to add the necessary property to the nodes.

I still think we should fix the bug regardless of whether we remove the code somewhere in the near future.

Well yes if you want this as a bug fix for the upcoming release, I agree, in which case we don't need to worry about the code size since it is temporary.

Would you mind sending a second patch to remove it? I will pick up the bug-fix now and add the removal to -next when it comes.

Also please expand the commit message to cover some of the material here, i.e. why we end up in this case for your board and why you don't want to add the 'console' property.

Regards,
Simon

#8 lore raw
Quoted 2 lines

From: Simon Glass <[email protected]>
Date: Sun, 20 Feb 2022 21:40:09 -0700

Hi Simon,

Quoted 132 lines

Hi Mark,

Quoted 117 lines · Mark Kettenis
Quoted 102 lines

From: Simon Glass <[email protected]>
Date: Sat, 19 Feb 2022 15:21:19 -0700

Hi Mark,

Quoted 89 lines · Mark Kettenis
Quoted 3 lines

From: Simon Glass <[email protected]>
Date: Fri, 18 Feb 2022 17:21:13 -0700

Hi Simon,

Quoted 44 lines

Hi Mark,

Quoted 41 lines · Mark Kettenis
Quoted 14 lines

From: Simon Glass <[email protected]>
Date: Mon, 7 Feb 2022 13:22:22 -0700

Hi Mark,

Quoted 7 lines · Mark Kettenis

The stdout-path property in the device tree does not necessarily point at a serial device. The code that binds the device if it isn't marked to be bound before relocation does not check whether the device really is a serial device. So check that its uclass is UCLASS_SERIAL before probing it.

Quoted 7 lines
Quoted 4 lines
---
 drivers/serial/serial-uclass.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

This would be better as an assert() to avoid code bloat. Under what circumstances was this wrong?

I'm passing a debive tree to U-Boot that has stdout-path set to "/chosen/framebuffer" to indicate that output should go to the framebuffer instead of the serial port. This is a node with a "simple-framebuffer" compatible, which means the list_bind_fdt() call binds the simple_video (simplefb.c) driver and stores a pointer to its struct udevice into devp. I've verified that the uclass is indeed UCLASS_VIDEO at that point with my device tree.

Since the function returns 0, the caller of this function thinks we returned a valid UCLASS_SERIAL device and when u-boot starts using it as such it crashes (without printing anything since there is no console output device yet).

So an assert won't work. We should simply return an error an run the fallback code below that looks for the serial port with the specified index. That way U-Boot continues to work as expected (with output on both the serial port and the framebuffer). But once my OS is running, it knows to pick the framebuffer console and all's fine.

Quoted 6 lines
Quoted 3 lines

I haven't looked at the binary growth, but it can't be much. But if you think it is a problem, maybe we should make this code that binds the console driver optional?

OK I see. It likely isn't much, but in SPL it is still growth. Worth checking.

before:

$ size u-boot
text    data    bss     dec     he
442903  27700   13448   484051  762d3

after:

$ size u-boot
text    data    bss     dec     hex
442925  27700   13448   484073  762e9

So that's 22 bytes.

Thew growth in serial-uclass.o is a bit smaller; only 16 byes.

Quoted 2 lines

Can you perhaps create a 'console' alias so that the line above finds the correct one?

Probably. But none of the Linux device trees provide a 'console' alias so this seems to be a U-Boot convention. And it doesn't actually fix the bug; it just works around it.

Quoted 3 lines

But I'm a bit unsure of how you get the serial console to work if serial_check_stdout() fails? Is the serial driver not marked for pre-reloc use? There is something odd going on.

The serial driver is marked for pre-reloc use. When serial_check_stdout() fails the code at the tail end of serial_find_console_or_panic() runs and finds the serial device at index 0 and uses that.

Quoted 5 lines

The "something odd" that's going on here is that I set "/chosen/stdout-path" to point to the framebuffer instead of a serial port. But nowhere does the device tree specification say that "stdout-path" has to point at a serial device. So U-Boot shouldn't crash when this isn't the case.

Quoted 8 lines

OK, I think this is the sort of info that should have been in your commit message.

However, looking at this, the code you are changing should not be there now. It was added for backwards-compatibility reasons.

Let's remove the lists_bind_fdt() call and rely on people doing the right thing now.

Right. I'm worrying a bit that this will break many boards. I was thinking in particular about boards like the raspberry pi where we use the device tree provided by the firmware. But on that the serial drivers have the DM_FLAG_PRE_RELOC flag set when OF_BOARD is defined, so that shouldn't be a problem.

Quoted 7 lines

But many other serial drivers don't set DM_FLAG_PRE_RELOC, or only set it when !OF_CONTROL. I checked a few of those and most of them don't seem to have the *-u-boot.dtsi files to add the necessary property to the nodes.

I still think we should fix the bug regardless of whether we remove the code somewhere in the near future.

Well yes if you want this as a bug fix for the upcoming release, I agree, in which case we don't need to worry about the code size since it is temporary.

Quoted 6 lines

Would you mind sending a second patch to remove it? I will pick up the bug-fix now and add the removal to -next when it comes.

Also please expand the commit message to cover some of the material here, i.e. why we end up in this case for your board and why you don't want to add the 'console' property.

Actually, adding a 'console' alias doesn't help, since that is only used if there is no stdout-path property. But in my case there is.

I extended the commit message and send a v2. I also sent a separate diff that removes the whole block of code again.

Cheers,

Mark