Skip to contentSkip to conversation

gpio: Enable hogging support in SPL

PATCH Superseded Eddie James 2 participants 2 messages Feb 7, 2022 GPIO

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 gpio: Enable hogging support in SPL

Use the CONFIG macros to conditionally build the GPIO hogging support in either the SPL or U-Boot, or both, depending on the configuration. Also call the GPIO hog probe function in the common SPL board initialization as an equivalent to adding it to the U-Boot init sequence functions.

---
 common/spl/spl.c           |  4 ++++
 drivers/gpio/Kconfig       | 10 ++++++++++
 drivers/gpio/gpio-uclass.c | 10 ++++++----
 3 files changed, 20 insertions(+), 4 deletions(-)
common/spl/spl.c +4 -0
index 884102bdea..36115e674d 100644
@@ -20,6 +20,7 @@
 #include <serial.h>
 #include <spl.h>
 #include <asm/global_data.h>
+#include <asm/gpio.h>
 #include <asm/u-boot.h>
 #include <nand.h>
 #include <fat.h>
@@ -739,6 +740,9 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
 		}
 	}
 
+	if (CONFIG_IS_ENABLED(GPIO_HOG))
+		gpio_hog_probe_all();
+
 #if CONFIG_IS_ENABLED(BOARD_INIT)
 	spl_board_init();
 #endif
drivers/gpio/Kconfig +10 -0
index 305a2dc563..4da2bdc10d 100644
@@ -57,6 +57,16 @@ config GPIO_HOG
 	  is a mechanism providing automatic GPIO request and config-
 	  uration as part of the gpio-controller's driver probe function.
 
+config SPL_GPIO_HOG
+	bool "Enable GPIO hog support in SPL"
+	depends on SPL_GPIO_SUPPORT
+	default n
+	help
+	  Enable gpio hog support in SPL
+	  The GPIO chip may contain GPIO hog definitions. GPIO hogging
+	  is a mechanism providing automatic GPIO request and config-
+	  uration as part of the gpio-controller's driver probe function.
+
 config DM_GPIO_LOOKUP_LABEL
 	bool "Enable searching for gpio labelnames"
 	depends on DM_GPIO
drivers/gpio/gpio-uclass.c +6 -4
index 125ae53d61..bebba620c9 100644
@@ -1432,9 +1432,6 @@ void devm_gpiod_put(struct udevice *dev, struct gpio_desc *desc)
 
 static int gpio_post_bind(struct udevice *dev)
 {
-	struct udevice *child;
-	ofnode node;
-
 #if defined(CONFIG_NEEDS_MANUAL_RELOC)
 	struct dm_gpio_ops *ops = (struct dm_gpio_ops *)device_get_ops(dev);
 	static int reloc_done;
@@ -1465,7 +1462,11 @@ static int gpio_post_bind(struct udevice *dev)
 	}
 #endif
 
-	if (CONFIG_IS_ENABLED(OF_REAL) && IS_ENABLED(CONFIG_GPIO_HOG)) {
+#if CONFIG_IS_ENABLED(GPIO_HOG)
+	{
+		struct udevice *child;
+		ofnode node;
+
 		dev_for_each_subnode(node, dev) {
 			if (ofnode_read_bool(node, "gpio-hog")) {
 				const char *name = ofnode_get_name(node);
@@ -1480,6 +1481,7 @@ static int gpio_post_bind(struct udevice *dev)
 			}
 		}
 	}
+#endif
 	return 0;
 }
 
Signature · 1 line
2.27.0
#1 lore raw

Hi Eddie,

Quoted 6 lines · Eddie James

Use the CONFIG macros to conditionally build the GPIO hogging support in either the SPL or U-Boot, or both, depending on the configuration. Also call the GPIO hog probe function in the common SPL board initialization as an equivalent to adding it to the U-Boot init sequence functions.

Quoted 6 lines
---
 common/spl/spl.c           |  4 ++++
 drivers/gpio/Kconfig       | 10 ++++++++++
 drivers/gpio/gpio-uclass.c | 10 ++++++----
 3 files changed, 20 insertions(+), 4 deletions(-)

Please add a change log. Also it seems to be using #if which is best avoided if possible.

Regards,
SImon