Skip to contentSkip to conversation

iio: temperature: ltc2983: Don't hard code defined constants in messages

PATCH Superseded Andy Shevchenko 4 participants 13 messages Feb 10, 2022 – Mar 3, 2022

Subsystems (2)

v3 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/3 iio: temperature: ltc2983: Don't hard code defined constants in messages

In a couple of messages the constants, which have their definitions, are hard coded into the message text. Unhardcode them.

While at it, add a trailing \n where it's currently missing.

---
v3: added \n, used %u (Joe)

 drivers/iio/temperature/ltc2983.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/iio/temperature/ltc2983.c +4 -4
index 301c3f13fb26..94d6dd4db47a 100644
@@ -409,8 +409,8 @@ static struct ltc2983_custom_sensor *__ltc2983_custom_sensor_new(
 	new_custom->size = n_entries * n_size;
 	/* check Steinhart size */
 	if (is_steinhart && new_custom->size != LTC2983_CUSTOM_STEINHART_SIZE) {
-		dev_err(dev, "Steinhart sensors size(%zu) must be 24",
-							new_custom->size);
+		dev_err(dev, "Steinhart sensors size(%zu) must be %u\n", new_custom->size,
+			LTC2983_CUSTOM_STEINHART_SIZE);
 		return ERR_PTR(-EINVAL);
 	}
 	/* Check space on the table. */
@@ -1299,8 +1299,8 @@ static int ltc2983_parse_dt(struct ltc2983_data *st)
 		if (sensor.chan < LTC2983_MIN_CHANNELS_NR ||
 		    sensor.chan > LTC2983_MAX_CHANNELS_NR) {
 			ret = -EINVAL;
-			dev_err(dev,
-				"chan:%d must be from 1 to 20\n", sensor.chan);
+			dev_err(dev, "chan:%d must be from %u to %u\n", sensor.chan,
+				LTC2983_MIN_CHANNELS_NR, LTC2983_MAX_CHANNELS_NR);
 			goto put_child;
 		} else if (channel_avail_mask & BIT(sensor.chan)) {
 			ret = -EINVAL;
Signature · 1 line
2.34.1
#1 lore raw

PATCH v3 2/3 iio: temperature: ltc2983: Use single error path to put OF node

There are several, possibly copied'n'pasted, places in the functions, where OF node is put and error returned directly, while the common exit point exists. Unify all these cases to use a single error path.

---
v3: no changes

 drivers/iio/temperature/ltc2983.c | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)
drivers/iio/temperature/ltc2983.c +11 -10
index 94d6dd4db47a..636bbc9011b9 100644
@@ -653,8 +653,6 @@ static struct ltc2983_sensor *ltc2983_thermocouple_new(
 
 	phandle = of_parse_phandle(child, "adi,cold-junction-handle", 0);
 	if (phandle) {
-		int ret;
-
 		ret = of_property_read_u32(phandle, "reg",
 					   &thermo->cold_junction_chan);
 		if (ret) {
@@ -663,8 +661,7 @@ static struct ltc2983_sensor *ltc2983_thermocouple_new(
 			 * the error right away.
 			 */
 			dev_err(&st->spi->dev, "Property reg must be given\n");
-			of_node_put(phandle);
-			return ERR_PTR(-EINVAL);
+			goto fail;
 		}
 	}
 
@@ -676,8 +673,8 @@ static struct ltc2983_sensor *ltc2983_thermocouple_new(
 							     propname, false,
 							     16384, true);
 		if (IS_ERR(thermo->custom)) {
-			of_node_put(phandle);
-			return ERR_CAST(thermo->custom);
+			ret = PTR_ERR(thermo->custom);
+			goto fail;
 		}
 	}
 
@@ -687,6 +684,10 @@ static struct ltc2983_sensor *ltc2983_thermocouple_new(
 
 	of_node_put(phandle);
 	return &thermo->sensor;
+
+fail:
+	of_node_put(phandle);
+	return ERR_PTR(ret);
 }
 
 static struct ltc2983_sensor *ltc2983_rtd_new(const struct device_node *child,
@@ -803,8 +804,8 @@ static struct ltc2983_sensor *ltc2983_rtd_new(const struct device_node *child,
 							  "adi,custom-rtd",
 							  false, 2048, false);
 		if (IS_ERR(rtd->custom)) {
-			of_node_put(phandle);
-			return ERR_CAST(rtd->custom);
+			ret = PTR_ERR(rtd->custom);
+			goto fail;
 		}
 	}
 
@@ -926,8 +927,8 @@ static struct ltc2983_sensor *ltc2983_thermistor_new(
 								 steinhart,
 								 64, false);
 		if (IS_ERR(thermistor->custom)) {
-			of_node_put(phandle);
-			return ERR_CAST(thermistor->custom);
+			ret = PTR_ERR(thermistor->custom);
+			goto fail;
 		}
 	}
 	/* set common parameters */
Signature · 1 line
2.34.1
#2 lore raw

PATCH v3 3/3 iio: temperature: ltc2983: Make use of device properties

In reply to Andy Shevchenko

Convert the module to be property provider agnostic and allow it to be used on non-OF platforms.

The conversion slightly changes the logic behind property reading for the configuration values. Original code allocates just as much memory as needed. Then for each separate 32- or 64-bit value it reads it from the property and converts to a raw one which will be fed to the sensor. In the new code we allocate the amount of memory needed to retrieve all values at once from the property and then convert them as required.

---
v3: no changes

 drivers/iio/temperature/ltc2983.c | 203 +++++++++++++++---------------
 1 file changed, 102 insertions(+), 101 deletions(-)
drivers/iio/temperature/ltc2983.c +102 -101
index 636bbc9011b9..d20f957ca0d9 100644
@@ -12,11 +12,15 @@
 #include <linux/iio/iio.h>
 #include <linux/interrupt.h>
 #include <linux/list.h>
+#include <linux/mod_devicetable.h>
 #include <linux/module.h>
-#include <linux/of_gpio.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/spi/spi.h>
 
+#include <asm/byteorder.h>
+#include <asm/unaligned.h>
+
 /* register map */
 #define LTC2983_STATUS_REG			0x0000
 #define LTC2983_TEMP_RES_START_REG		0x0010
@@ -219,7 +223,7 @@ struct ltc2983_sensor {
 
 struct ltc2983_custom_sensor {
 	/* raw table sensor data */
-	u8 *table;
+	void *table;
 	size_t size;
 	/* address offset */
 	s8 offset;
@@ -377,25 +381,25 @@ static int __ltc2983_chan_custom_sensor_assign(struct ltc2983_data *st,
 	return regmap_bulk_write(st->regmap, reg, custom->table, custom->size);
 }
 
-static struct ltc2983_custom_sensor *__ltc2983_custom_sensor_new(
-						struct ltc2983_data *st,
-						const struct device_node *np,
-						const char *propname,
-						const bool is_steinhart,
-						const u32 resolution,
-						const bool has_signed)
+static struct ltc2983_custom_sensor *
+__ltc2983_custom_sensor_new(struct ltc2983_data *st, const struct fwnode_handle *fn,
+			    const char *propname, const bool is_steinhart,
+			    const u32 resolution, const bool has_signed)
 {
 	struct ltc2983_custom_sensor *new_custom;
-	u8 index, n_entries, tbl = 0;
 	struct device *dev = &st->spi->dev;
 	/*
 	 * For custom steinhart, the full u32 is taken. For all the others
 	 * the MSB is discarded.
 	 */
 	const u8 n_size = is_steinhart ? 4 : 3;
-	const u8 e_size = is_steinhart ? sizeof(u32) : sizeof(u64);
+	u8 index, n_entries;
+	int ret;
 
-	n_entries = of_property_count_elems_of_size(np, propname, e_size);
+	if (is_steinhart)
+		n_entries = fwnode_property_count_u32(fn, propname);
+	else
+		n_entries = fwnode_property_count_u64(fn, propname);
 	/* n_entries must be an even number */
 	if (!n_entries || (n_entries % 2) != 0) {
 		dev_err(dev, "Number of entries either 0 or not even\n");
@@ -423,21 +427,33 @@ static struct ltc2983_custom_sensor *__ltc2983_custom_sensor_new(
 	}
 
 	/* allocate the table */
-	new_custom->table = devm_kzalloc(dev, new_custom->size, GFP_KERNEL);
+	if (is_steinhart)
+		new_custom->table = devm_kcalloc(dev, n_entries, sizeof(u32), GFP_KERNEL);
+	else
+		new_custom->table = devm_kcalloc(dev, n_entries, sizeof(u64), GFP_KERNEL);
 	if (!new_custom->table)
 		return ERR_PTR(-ENOMEM);
 
-	for (index = 0; index < n_entries; index++) {
-		u64 temp = 0, j;
-		/*
-		 * Steinhart sensors are configured with raw values in the
-		 * devicetree. For the other sensors we must convert the
-		 * value to raw. The odd index's correspond to temperarures
-		 * and always have 1/1024 of resolution. Temperatures also
-		 * come in kelvin, so signed values is not possible
-		 */
-		if (!is_steinhart) {
-			of_property_read_u64_index(np, propname, index, &temp);
+	/*
+	 * Steinhart sensors are configured with raw values in the firmware
+	 * node. For the other sensors we must convert the value to raw.
+	 * The odd index's correspond to temperatures and always have 1/1024
+	 * of resolution. Temperatures also come in Kelvin, so signed values
+	 * are not possible.
+	 */
+	if (is_steinhart) {
+		ret = fwnode_property_read_u32_array(fn, propname, new_custom->table, n_entries);
+		if (ret < 0)
+			return ERR_PTR(ret);
+
+		cpu_to_be32_array(new_custom->table, new_custom->table, n_entries);
+	} else {
+		ret = fwnode_property_read_u64_array(fn, propname, new_custom->table, n_entries);
+		if (ret < 0)
+			return ERR_PTR(ret);
+
+		for (index = 0; index < n_entries; index++) {
+			u64 temp = ((u64 *)new_custom->table)[index];
 
 			if ((index % 2) != 0)
 				temp = __convert_to_raw(temp, 1024);
@@ -445,16 +461,9 @@ static struct ltc2983_custom_sensor *__ltc2983_custom_sensor_new(
 				temp = __convert_to_raw_sign(temp, resolution);
 			else
 				temp = __convert_to_raw(temp, resolution);
-		} else {
-			u32 t32;
 
-			of_property_read_u32_index(np, propname, index, &t32);
-			temp = t32;
+			put_unaligned_be24(temp, new_custom->table + index * 3);
 		}
-
-		for (j = 0; j < n_size; j++)
-			new_custom->table[tbl++] =
-				temp >> (8 * (n_size - j - 1));
 	}
 
 	new_custom->is_steinhart = is_steinhart;
@@ -597,13 +606,12 @@ static int ltc2983_adc_assign_chan(struct ltc2983_data *st,
 	return __ltc2983_chan_assign_common(st, sensor, chan_val);
 }
 
-static struct ltc2983_sensor *ltc2983_thermocouple_new(
-					const struct device_node *child,
-					struct ltc2983_data *st,
-					const struct ltc2983_sensor *sensor)
+static struct ltc2983_sensor *
+ltc2983_thermocouple_new(const struct fwnode_handle *child, struct ltc2983_data *st,
+			 const struct ltc2983_sensor *sensor)
 {
 	struct ltc2983_thermocouple *thermo;
-	struct device_node *phandle;
+	struct fwnode_handle *ref;
 	u32 oc_current;
 	int ret;
 
@@ -611,11 +619,10 @@ static struct ltc2983_sensor *ltc2983_thermocouple_new(
 	if (!thermo)
 		return ERR_PTR(-ENOMEM);
 
-	if (of_property_read_bool(child, "adi,single-ended"))
+	if (fwnode_property_read_bool(child, "adi,single-ended"))
 		thermo->sensor_config = LTC2983_THERMOCOUPLE_SGL(1);
 
-	ret = of_property_read_u32(child, "adi,sensor-oc-current-microamp",
-				   &oc_current);
+	ret = fwnode_property_read_u32(child, "adi,sensor-oc-current-microamp", &oc_current);
 	if (!ret) {
 		switch (oc_current) {
 		case 10:
@@ -651,10 +658,9 @@ static struct ltc2983_sensor *ltc2983_thermocouple_new(
 		return ERR_PTR(-EINVAL);
 	}
 
-	phandle = of_parse_phandle(child, "adi,cold-junction-handle", 0);
-	if (phandle) {
-		ret = of_property_read_u32(phandle, "reg",
-					   &thermo->cold_junction_chan);
+	ref = fwnode_find_reference(child, "adi,cold-junction-handle", 0);
+	if (ref) {
+		ret = fwnode_property_read_u32(ref, "reg", &thermo->cold_junction_chan);
 		if (ret) {
 			/*
 			 * This would be catched later but we can just return
@@ -682,41 +688,41 @@ static struct ltc2983_sensor *ltc2983_thermocouple_new(
 	thermo->sensor.fault_handler = ltc2983_thermocouple_fault_handler;
 	thermo->sensor.assign_chan = ltc2983_thermocouple_assign_chan;
 
-	of_node_put(phandle);
+	fwnode_handle_put(ref);
 	return &thermo->sensor;
 
 fail:
-	of_node_put(phandle);
+	fwnode_handle_put(ref);
 	return ERR_PTR(ret);
 }
 
-static struct ltc2983_sensor *ltc2983_rtd_new(const struct device_node *child,
-					  struct ltc2983_data *st,
-					  const struct ltc2983_sensor *sensor)
+static struct ltc2983_sensor *
+ltc2983_rtd_new(const struct fwnode_handle *child, struct ltc2983_data *st,
+		const struct ltc2983_sensor *sensor)
 {
 	struct ltc2983_rtd *rtd;
 	int ret = 0;
 	struct device *dev = &st->spi->dev;
-	struct device_node *phandle;
+	struct fwnode_handle *ref;
 	u32 excitation_current = 0, n_wires = 0;
 
 	rtd = devm_kzalloc(dev, sizeof(*rtd), GFP_KERNEL);
 	if (!rtd)
 		return ERR_PTR(-ENOMEM);
 
-	phandle = of_parse_phandle(child, "adi,rsense-handle", 0);
-	if (!phandle) {
+	ref = fwnode_find_reference(child, "adi,rsense-handle", 0);
+	if (!ref) {
 		dev_err(dev, "Property adi,rsense-handle missing or invalid");
 		return ERR_PTR(-EINVAL);
 	}
 
-	ret = of_property_read_u32(phandle, "reg", &rtd->r_sense_chan);
+	ret = fwnode_property_read_u32(ref, "reg", &rtd->r_sense_chan);
 	if (ret) {
 		dev_err(dev, "Property reg must be given\n");
 		goto fail;
 	}
 
-	ret = of_property_read_u32(child, "adi,number-of-wires", &n_wires);
+	ret = fwnode_property_read_u32(child, "adi,number-of-wires", &n_wires);
 	if (!ret) {
 		switch (n_wires) {
 		case 2:
@@ -739,9 +745,9 @@ static struct ltc2983_sensor *ltc2983_rtd_new(const struct device_node *child,
 		}
 	}
 
-	if (of_property_read_bool(child, "adi,rsense-share")) {
+	if (fwnode_property_read_bool(child, "adi,rsense-share")) {
 		/* Current rotation is only available with rsense sharing */
-		if (of_property_read_bool(child, "adi,current-rotate")) {
+		if (fwnode_property_read_bool(child, "adi,current-rotate")) {
 			if (n_wires == 2 || n_wires == 3) {
 				dev_err(dev,
 					"Rotation not allowed for 2/3 Wire RTDs");
@@ -813,8 +819,8 @@ static struct ltc2983_sensor *ltc2983_rtd_new(const struct device_node *child,
 	rtd->sensor.fault_handler = ltc2983_common_fault_handler;
 	rtd->sensor.assign_chan = ltc2983_rtd_assign_chan;
 
-	ret = of_property_read_u32(child, "adi,excitation-current-microamp",
-				   &excitation_current);
+	ret = fwnode_property_read_u32(child, "adi,excitation-current-microamp",
+				       &excitation_current);
 	if (ret) {
 		/* default to 5uA */
 		rtd->excitation_current = 1;
@@ -853,23 +859,22 @@ static struct ltc2983_sensor *ltc2983_rtd_new(const struct device_node *child,
 		}
 	}
 
-	of_property_read_u32(child, "adi,rtd-curve", &rtd->rtd_curve);
+	fwnode_property_read_u32(child, "adi,rtd-curve", &rtd->rtd_curve);
 
-	of_node_put(phandle);
+	fwnode_handle_put(ref);
 	return &rtd->sensor;
 fail:
-	of_node_put(phandle);
+	fwnode_handle_put(ref);
 	return ERR_PTR(ret);
 }
 
-static struct ltc2983_sensor *ltc2983_thermistor_new(
-					const struct device_node *child,
-					struct ltc2983_data *st,
-					const struct ltc2983_sensor *sensor)
+static struct ltc2983_sensor *
+ltc2983_thermistor_new(const struct fwnode_handle *child, struct ltc2983_data *st,
+		       const struct ltc2983_sensor *sensor)
 {
 	struct ltc2983_thermistor *thermistor;
 	struct device *dev = &st->spi->dev;
-	struct device_node *phandle;
+	struct fwnode_handle *ref;
 	u32 excitation_current = 0;
 	int ret = 0;
 
@@ -877,23 +882,23 @@ static struct ltc2983_sensor *ltc2983_thermistor_new(
 	if (!thermistor)
 		return ERR_PTR(-ENOMEM);
 
-	phandle = of_parse_phandle(child, "adi,rsense-handle", 0);
-	if (!phandle) {
+	ref = fwnode_find_reference(child, "adi,rsense-handle", 0);
+	if (!ref) {
 		dev_err(dev, "Property adi,rsense-handle missing or invalid");
 		return ERR_PTR(-EINVAL);
 	}
 
-	ret = of_property_read_u32(phandle, "reg", &thermistor->r_sense_chan);
+	ret = fwnode_property_read_u32(ref, "reg", &thermistor->r_sense_chan);
 	if (ret) {
 		dev_err(dev, "rsense channel must be configured...\n");
 		goto fail;
 	}
 
-	if (of_property_read_bool(child, "adi,single-ended")) {
+	if (fwnode_property_read_bool(child, "adi,single-ended")) {
 		thermistor->sensor_config = LTC2983_THERMISTOR_SGL(1);
-	} else if (of_property_read_bool(child, "adi,rsense-share")) {
+	} else if (fwnode_property_read_bool(child, "adi,rsense-share")) {
 		/* rotation is only possible if sharing rsense */
-		if (of_property_read_bool(child, "adi,current-rotate"))
+		if (fwnode_property_read_bool(child, "adi,current-rotate"))
 			thermistor->sensor_config =
 						LTC2983_THERMISTOR_C_ROTATE(1);
 		else
@@ -935,8 +940,8 @@ static struct ltc2983_sensor *ltc2983_thermistor_new(
 	thermistor->sensor.fault_handler = ltc2983_common_fault_handler;
 	thermistor->sensor.assign_chan = ltc2983_thermistor_assign_chan;
 
-	ret = of_property_read_u32(child, "adi,excitation-current-nanoamp",
-				   &excitation_current);
+	ret = fwnode_property_read_u32(child, "adi,excitation-current-nanoamp",
+				       &excitation_current);
 	if (ret) {
 		/* Auto range is not allowed for custom sensors */
 		if (sensor->type >= LTC2983_SENSOR_THERMISTOR_STEINHART)
@@ -1000,17 +1005,16 @@ static struct ltc2983_sensor *ltc2983_thermistor_new(
 		}
 	}
 
-	of_node_put(phandle);
+	fwnode_handle_put(ref);
 	return &thermistor->sensor;
 fail:
-	of_node_put(phandle);
+	fwnode_handle_put(ref);
 	return ERR_PTR(ret);
 }
 
-static struct ltc2983_sensor *ltc2983_diode_new(
-					const struct device_node *child,
-					const struct ltc2983_data *st,
-					const struct ltc2983_sensor *sensor)
+static struct ltc2983_sensor *
+ltc2983_diode_new(const struct fwnode_handle *child, const struct ltc2983_data *st,
+		  const struct ltc2983_sensor *sensor)
 {
 	struct ltc2983_diode *diode;
 	u32 temp = 0, excitation_current = 0;
@@ -1020,13 +1024,13 @@ static struct ltc2983_sensor *ltc2983_diode_new(
 	if (!diode)
 		return ERR_PTR(-ENOMEM);
 
-	if (of_property_read_bool(child, "adi,single-ended"))
+	if (fwnode_property_read_bool(child, "adi,single-ended"))
 		diode->sensor_config = LTC2983_DIODE_SGL(1);
 
-	if (of_property_read_bool(child, "adi,three-conversion-cycles"))
+	if (fwnode_property_read_bool(child, "adi,three-conversion-cycles"))
 		diode->sensor_config |= LTC2983_DIODE_3_CONV_CYCLE(1);
 
-	if (of_property_read_bool(child, "adi,average-on"))
+	if (fwnode_property_read_bool(child, "adi,average-on"))
 		diode->sensor_config |= LTC2983_DIODE_AVERAGE_ON(1);
 
 	/* validate channel index */
@@ -1041,8 +1045,8 @@ static struct ltc2983_sensor *ltc2983_diode_new(
 	diode->sensor.fault_handler = ltc2983_common_fault_handler;
 	diode->sensor.assign_chan = ltc2983_diode_assign_chan;
 
-	ret = of_property_read_u32(child, "adi,excitation-current-microamp",
-				   &excitation_current);
+	ret = fwnode_property_read_u32(child, "adi,excitation-current-microamp",
+				       &excitation_current);
 	if (!ret) {
 		switch (excitation_current) {
 		case 10:
@@ -1065,7 +1069,7 @@ static struct ltc2983_sensor *ltc2983_diode_new(
 		}
 	}
 
-	of_property_read_u32(child, "adi,ideal-factor-value", &temp);
+	fwnode_property_read_u32(child, "adi,ideal-factor-value", &temp);
 
 	/* 2^20 resolution */
 	diode->ideal_factor_value = __convert_to_raw(temp, 1048576);
@@ -1073,7 +1077,7 @@ static struct ltc2983_sensor *ltc2983_diode_new(
 	return &diode->sensor;
 }
 
-static struct ltc2983_sensor *ltc2983_r_sense_new(struct device_node *child,
+static struct ltc2983_sensor *ltc2983_r_sense_new(struct fwnode_handle *child,
 					struct ltc2983_data *st,
 					const struct ltc2983_sensor *sensor)
 {
@@ -1092,7 +1096,7 @@ static struct ltc2983_sensor *ltc2983_r_sense_new(struct device_node *child,
 		return ERR_PTR(-EINVAL);
 	}
 
-	ret = of_property_read_u32(child, "adi,rsense-val-milli-ohms", &temp);
+	ret = fwnode_property_read_u32(child, "adi,rsense-val-milli-ohms", &temp);
 	if (ret) {
 		dev_err(&st->spi->dev, "Property adi,rsense-val-milli-ohms missing\n");
 		return ERR_PTR(-EINVAL);
@@ -1111,7 +1115,7 @@ static struct ltc2983_sensor *ltc2983_r_sense_new(struct device_node *child,
 	return &rsense->sensor;
 }
 
-static struct ltc2983_sensor *ltc2983_adc_new(struct device_node *child,
+static struct ltc2983_sensor *ltc2983_adc_new(struct fwnode_handle *child,
 					 struct ltc2983_data *st,
 					 const struct ltc2983_sensor *sensor)
 {
@@ -1121,7 +1125,7 @@ static struct ltc2983_sensor *ltc2983_adc_new(struct device_node *child,
 	if (!adc)
 		return ERR_PTR(-ENOMEM);
 
-	if (of_property_read_bool(child, "adi,single-ended"))
+	if (fwnode_property_read_bool(child, "adi,single-ended"))
 		adc->single_ended = true;
 
 	if (!adc->single_ended &&
@@ -1265,17 +1269,15 @@ static irqreturn_t ltc2983_irq_handler(int irq, void *data)
 
 static int ltc2983_parse_dt(struct ltc2983_data *st)
 {
-	struct device_node *child;
 	struct device *dev = &st->spi->dev;
+	struct fwnode_handle *child;
 	int ret = 0, chan = 0, channel_avail_mask = 0;
 
-	of_property_read_u32(dev->of_node, "adi,mux-delay-config-us",
-			     &st->mux_delay_config);
+	device_property_read_u32(dev, "adi,mux-delay-config-us", &st->mux_delay_config);
 
-	of_property_read_u32(dev->of_node, "adi,filter-notch-freq",
-			     &st->filter_notch_freq);
+	device_property_read_u32(dev, "adi,filter-notch-freq", &st->filter_notch_freq);
 
-	st->num_channels = of_get_available_child_count(dev->of_node);
+	st->num_channels = device_get_child_node_count(dev);
 	if (!st->num_channels) {
 		dev_err(&st->spi->dev, "At least one channel must be given!");
 		return -EINVAL;
@@ -1287,10 +1289,10 @@ static int ltc2983_parse_dt(struct ltc2983_data *st)
 		return -ENOMEM;
 
 	st->iio_channels = st->num_channels;
-	for_each_available_child_of_node(dev->of_node, child) {
+	device_for_each_child_node(dev, child) {
 		struct ltc2983_sensor sensor;
 
-		ret = of_property_read_u32(child, "reg", &sensor.chan);
+		ret = fwnode_property_read_u32(child, "reg", &sensor.chan);
 		if (ret) {
 			dev_err(dev, "reg property must given for child nodes\n");
 			goto put_child;
@@ -1309,8 +1311,7 @@ static int ltc2983_parse_dt(struct ltc2983_data *st)
 			goto put_child;
 		}
 
-		ret = of_property_read_u32(child, "adi,sensor-type",
-					       &sensor.type);
+		ret = fwnode_property_read_u32(child, "adi,sensor-type", &sensor.type);
 		if (ret) {
 			dev_err(dev,
 				"adi,sensor-type property must given for child nodes\n");
@@ -1364,7 +1365,7 @@ static int ltc2983_parse_dt(struct ltc2983_data *st)
 
 	return 0;
 put_child:
-	of_node_put(child);
+	fwnode_handle_put(child);
 	return ret;
 }
 
Signature · 1 line
2.34.1
maintainer
#9 lore raw
In reply to Andy Shevchenko
Quoted 7 lines · On Thu, 10 Feb 2022 15:55:20 +0200 Andy Shevchenko…

In a couple of messages the constants, which have their definitions, are hard coded into the message text. Unhardcode them.

While at it, add a trailing \n where it's currently missing.

Mostly so I can remember what is going on with this patch, Nuno is OoO and planning to test this series when he returns.

Given that I'll wait on Nuno's testing.

Thanks,

Jonathan

Quoted 31 lines

---
v3: added \n, used %u (Joe)

 drivers/iio/temperature/ltc2983.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/iio/temperature/ltc2983.c +4 -4
index 301c3f13fb26..94d6dd4db47a 100644
@@ -409,8 +409,8 @@ static struct ltc2983_custom_sensor *__ltc2983_custom_sensor_new(
 	new_custom->size = n_entries * n_size;
 	/* check Steinhart size */
 	if (is_steinhart && new_custom->size != LTC2983_CUSTOM_STEINHART_SIZE) {
-		dev_err(dev, "Steinhart sensors size(%zu) must be 24",
-							new_custom->size);
+		dev_err(dev, "Steinhart sensors size(%zu) must be %u\n", new_custom->size,
+			LTC2983_CUSTOM_STEINHART_SIZE);
 		return ERR_PTR(-EINVAL);
 	}
 	/* Check space on the table. */
@@ -1299,8 +1299,8 @@ static int ltc2983_parse_dt(struct ltc2983_data *st)
 		if (sensor.chan < LTC2983_MIN_CHANNELS_NR ||
 		    sensor.chan > LTC2983_MAX_CHANNELS_NR) {
 			ret = -EINVAL;
-			dev_err(dev,
-				"chan:%d must be from 1 to 20\n", sensor.chan);
+			dev_err(dev, "chan:%d must be from %u to %u\n", sensor.chan,
+				LTC2983_MIN_CHANNELS_NR, LTC2983_MAX_CHANNELS_NR);
 			goto put_child;
 		} else if (channel_avail_mask & BIT(sensor.chan)) {
 			ret = -EINVAL;
#10 lore raw
Quoted 8 lines · Jonathan Cameron
Quoted 5 lines · On Thu, 10 Feb 2022 15:55:20 +0200 Andy Shevchenko…

In a couple of messages the constants, which have their definitions, are hard coded into the message text. Unhardcode them.

While at it, add a trailing \n where it's currently missing.

Quoted 7 lines
Quoted 2 lines

Mostly so I can remember what is going on with this patch, Nuno is OoO and planning to test this series when he returns.

Given that I'll wait on Nuno's testing.

Me too :-)

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#11 lore raw
In reply to Jonathan Cameron
Quoted 8 lines · Jonathan Cameron
Quoted 5 lines · On Thu, 10 Feb 2022 15:55:20 +0200 Andy Shevchenko…

In a couple of messages the constants, which have their definitions, are hard coded into the message text. Unhardcode them.

While at it, add a trailing \n where it's currently missing.

Quoted 7 lines
Quoted 2 lines

Mostly so I can remember what is going on with this patch, Nuno is OoO and planning to test this series when he returns.

Given that I'll wait on Nuno's testing.

Any news?

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#12 lore raw
Quoted 14 lines · Andy Shevchenko
Quoted 13 lines · Jonathan Cameron
Quoted 9 lines · On Thu, 10 Feb 2022 15:55:20 +0200 Andy Shevchenko…

In a couple of messages the constants, which have their definitions,
are hard coded into the message text. Unhardcode them.

While at it, add a trailing \n where it's currently missing.

Signed-off-by: Andy Shevchenko
<[email protected]>

Quoted 7 lines
Quoted 4 lines

Mostly so I can remember what is going on with this patch, Nuno is OoO and planning to test this series when he returns.

Given that I'll wait on Nuno's testing.

Any news?

Started to prepare things by the end of the day. Should be tested by tomorrow.

- Nuno Sá

maintainer Tested-by on v3 3/3
#3 lore raw

RE: [PATCH v3 3/3] iio: temperature: ltc2983: Make use of device properties

In reply to Andy Shevchenko

Hi Andy,

Good that we waited to test this patch. The fundamental logic change for fetching and writing the custom tables are fine. That said, there some issues that I had to fix to test the patch. See below...

Quoted 245 lines

From: Andy Shevchenko <[email protected]>
Sent: Thursday, February 10, 2022 2:55 PM
To: Andy Shevchenko <[email protected]>; linux- [email protected]; [email protected]
Cc: Sa, Nuno <[email protected]>; Jonathan Cameron <[email protected]>; Lars-Peter Clausen <[email protected]>
Subject: [PATCH v3 3/3] iio: temperature: ltc2983: Make use of device properties

[External]

Convert the module to be property provider agnostic and allow it to be used on non-OF platforms.

The conversion slightly changes the logic behind property reading for the configuration values. Original code allocates just as much memory as needed. Then for each separate 32- or 64-bit value it reads it from the property and converts to a raw one which will be fed to the sensor. In the new code we allocate the amount of memory needed to retrieve all
values at once from the property and then convert them as required.

Signed-off-by: Andy Shevchenko
<[email protected]>
---
v3: no changes

 drivers/iio/temperature/ltc2983.c | 203 +++++++++++++++-------------
--
 1 file changed, 102 insertions(+), 101 deletions(-)
drivers/iio/temperature/ltc2983.c +12 -12
index 636bbc9011b9..d20f957ca0d9 100644
@@ -12,11 +12,15 @@
 #include <linux/iio/iio.h>
 #include <linux/interrupt.h>
 #include <linux/list.h>
+#include <linux/mod_devicetable.h>
 #include <linux/module.h>
-#include <linux/of_gpio.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/spi/spi.h>
 
+#include <asm/byteorder.h>
+#include <asm/unaligned.h>
+
 /* register map */
 #define LTC2983_STATUS_REG			0x0000
 #define LTC2983_TEMP_RES_START_REG		0x0010
@@ -219,7 +223,7 @@ struct ltc2983_sensor {
 
 struct ltc2983_custom_sensor {
 	/* raw table sensor data */
-	u8 *table;
+	void *table;
 	size_t size;
 	/* address offset */
 	s8 offset;
@@ -377,25 +381,25 @@ static int
 __ltc2983_chan_custom_sensor_assign(struct ltc2983_data *st,
 	return regmap_bulk_write(st->regmap, reg, custom->table,
 custom->size);
 }
 
-static struct ltc2983_custom_sensor
 *__ltc2983_custom_sensor_new(
-						struct ltc2983_data *st,
-						const struct
 device_node *np,
-						const char *propname,
-						const bool is_steinhart,
-						const u32 resolution,
-						const bool has_signed)
+static struct ltc2983_custom_sensor *
+__ltc2983_custom_sensor_new(struct ltc2983_data *st, const struct
 fwnode_handle *fn,
+			    const char *propname, const bool
 is_steinhart,
+			    const u32 resolution, const bool has_signed)
 {
 	struct ltc2983_custom_sensor *new_custom;
-	u8 index, n_entries, tbl = 0;
 	struct device *dev = &st->spi->dev;
 	/*
 	 * For custom steinhart, the full u32 is taken. For all the others
 	 * the MSB is discarded.
 	 */
 	const u8 n_size = is_steinhart ? 4 : 3;
-	const u8 e_size = is_steinhart ? sizeof(u32) : sizeof(u64);
+	u8 index, n_entries;
+	int ret;
 
-	n_entries = of_property_count_elems_of_size(np, propname,

e_size);

drivers/iio/temperature/ltc2983.c +2 -0
+	if (is_steinhart)
+		n_entries = fwnode_property_count_u32(fn,

propname);

drivers/iio/temperature/ltc2983.c +2 -0
+	else
+		n_entries = fwnode_property_count_u64(fn,

propname);

drivers/iio/temperature/ltc2983.c +0 -0
 	/* n_entries must be an even number */
 	if (!n_entries || (n_entries % 2) != 0) {
 		dev_err(dev, "Number of entries either 0 or not

even\n");

drivers/iio/temperature/ltc2983.c +4 -5
@@ -423,21 +427,33 @@ static struct ltc2983_custom_sensor
 *__ltc2983_custom_sensor_new(
 	}
 
 	/* allocate the table */
-	new_custom->table = devm_kzalloc(dev, new_custom->size,
 GFP_KERNEL);
+	if (is_steinhart)
+		new_custom->table = devm_kcalloc(dev, n_entries,
 sizeof(u32), GFP_KERNEL);
+	else
+		new_custom->table = devm_kcalloc(dev, n_entries,
 sizeof(u64), GFP_KERNEL);
 	if (!new_custom->table)
 		return ERR_PTR(-ENOMEM);
 
-	for (index = 0; index < n_entries; index++) {
-		u64 temp = 0, j;
-		/*
-		 * Steinhart sensors are configured with raw values in

the

drivers/iio/temperature/ltc2983.c +0 -1
-		 * devicetree. For the other sensors we must convert

the

drivers/iio/temperature/ltc2983.c +0 -1
-		 * value to raw. The odd index's correspond to

temperarures

drivers/iio/temperature/ltc2983.c +0 -1
-		 * and always have 1/1024 of resolution. Temperatures

also

drivers/iio/temperature/ltc2983.c +0 -4
-		 * come in kelvin, so signed values is not possible
-		 */
-		if (!is_steinhart) {
-			of_property_read_u64_index(np, propname,

index, &temp);

drivers/iio/temperature/ltc2983.c +2 -0
+	/*
+	 * Steinhart sensors are configured with raw values in the

firmware

drivers/iio/temperature/ltc2983.c +1 -0
+	 * node. For the other sensors we must convert the value to

raw.

drivers/iio/temperature/ltc2983.c +1 -0
+	 * The odd index's correspond to temperatures and always

have 1/1024

drivers/iio/temperature/ltc2983.c +1 -0
+	 * of resolution. Temperatures also come in Kelvin, so signed

values

drivers/iio/temperature/ltc2983.c +4 -0
+	 * are not possible.
+	 */
+	if (is_steinhart) {
+		ret = fwnode_property_read_u32_array(fn,

propname, new_custom->table, n_entries);

drivers/iio/temperature/ltc2983.c +4 -0
+		if (ret < 0)
+			return ERR_PTR(ret);
+
+		cpu_to_be32_array(new_custom->table,

new_custom->table, n_entries);

drivers/iio/temperature/ltc2983.c +2 -0
+	} else {
+		ret = fwnode_property_read_u64_array(fn,

propname, new_custom->table, n_entries);

drivers/iio/temperature/ltc2983.c +5 -0
+		if (ret < 0)
+			return ERR_PTR(ret);
+
+		for (index = 0; index < n_entries; index++) {
+			u64 temp = ((u64 *)new_custom-
Quoted 1 line

table)[index];

drivers/iio/temperature/ltc2983.c +1 -4
 			if ((index % 2) != 0)
 				temp = __convert_to_raw(temp, 1024);
@@ -445,16 +461,9 @@ static struct ltc2983_custom_sensor
 *__ltc2983_custom_sensor_new(
 				temp = __convert_to_raw_sign(temp,
 resolution);
 			else
 				temp = __convert_to_raw(temp,
 resolution);
-		} else {
-			u32 t32;
 
-			of_property_read_u32_index(np, propname,
 index, &t32);
-			temp = t32;
+			put_unaligned_be24(temp, new_custom-
Quoted 1 line

table + index * 3);

drivers/iio/temperature/ltc2983.c +4 -9
 		}
-
-		for (j = 0; j < n_size; j++)
-			new_custom->table[tbl++] =
-				temp >> (8 * (n_size - j - 1));
 	}
 
 	new_custom->is_steinhart = is_steinhart;
@@ -597,13 +606,12 @@ static int ltc2983_adc_assign_chan(struct
 ltc2983_data *st,
 	return __ltc2983_chan_assign_common(st, sensor, chan_val);
 }
 
-static struct ltc2983_sensor *ltc2983_thermocouple_new(
-					const struct device_node *child,
-					struct ltc2983_data *st,
-					const struct ltc2983_sensor
 *sensor)
+static struct ltc2983_sensor *
+ltc2983_thermocouple_new(const struct fwnode_handle *child,
 struct ltc2983_data *st,
+			 const struct ltc2983_sensor *sensor)
 {
 	struct ltc2983_thermocouple *thermo;
-	struct device_node *phandle;
+	struct fwnode_handle *ref;
drivers/iio/temperature/ltc2983.c +2 -3
 	u32 oc_current;
 	int ret;
@@ -611,11 +619,10 @@ static struct ltc2983_sensor
 *ltc2983_thermocouple_new(
 	if (!thermo)
 		return ERR_PTR(-ENOMEM);
 
-	if (of_property_read_bool(child, "adi,single-ended"))
+	if (fwnode_property_read_bool(child, "adi,single-ended"))
 		thermo->sensor_config =
 LTC2983_THERMOCOUPLE_SGL(1);
 
-	ret = of_property_read_u32(child, "adi,sensor-oc-current-
 microamp",
-				   &oc_current);
+	ret = fwnode_property_read_u32(child, "adi,sensor-oc-

current-microamp", &oc_current);

drivers/iio/temperature/ltc2983.c +1 -4
 	if (!ret) {
 		switch (oc_current) {
 		case 10:
@@ -651,10 +658,9 @@ static struct ltc2983_sensor
 *ltc2983_thermocouple_new(
 		return ERR_PTR(-EINVAL);
 	}
 
-	phandle = of_parse_phandle(child, "adi,cold-junction-handle",
 0);
-	if (phandle) {
-		ret = of_property_read_u32(phandle, "reg",
-					   &thermo-
 >cold_junction_chan);
+	ref = fwnode_find_reference(child, "adi,cold-junction-

handle", 0);

drivers/iio/temperature/ltc2983.c static struct ltc2983_sensor *ltc2983_thermocouple_new( · line 662

Quoted 1 line
drivers/iio/temperature/ltc2983.c +1 -0
+	if (ref) {

This is nok. It needs to be 'if (IS_ERR(ref))'. We then should return ERR_CAST() in case of errors inside the if block. As this reference is also optional, we need to nullify ref in case we don't find the it. Otherwise fwnode_handle_put() breaks.

We also need to use ptr error logic in the other places where fwnode_find_reference() is used. Although, in the other cases the ref is mandatory, so there's no need to care with breaking fwnode_handle_put().

After these changes (I think the changes are straight enough; but I can re-test if you or Jonathan ask for it):

#4 lore raw

Re: [PATCH v3 3/3] iio: temperature: ltc2983: Make use of device properties

Quoted 5 lines · Nuno

Hi Andy,

Good that we waited to test this patch. The fundamental logic change for fetching and writing the custom tables are fine. That said, there some issues that I had to fix to test the patch. See below...

Thanks and indeed it's a good news that we caught a bug beforehand.

Quoted 2 lines
Quoted 2 lines

From: Andy Shevchenko <[email protected]>
Sent: Thursday, February 10, 2022 2:55 PM

...

Quoted 6 lines
Quoted 6 lines
(quoted diff) +0 -1
-	phandle = of_parse_phandle(child, "adi,cold-junction-handle",

0);

drivers/iio/temperature/ltc2983.c +0 -3
-	if (phandle) {
-		ret = of_property_read_u32(phandle, "reg",
-					   &thermo-
Quoted 1 line

cold_junction_chan);

Quoted 8 lines

drivers/iio/temperature/ltc2983.c static struct ltc2983_sensor *ltc2983_thermocouple_new( · line 662

Quoted 3 lines
(quoted diff) +1 -0
+	ref = fwnode_find_reference(child, "adi,cold-junction-

handle", 0);

drivers/iio/temperature/ltc2983.c +1 -0
+	if (ref) {

This is nok. It needs to be 'if (IS_ERR(ref))'. We then should return ERR_CAST() in case of errors inside the if block. As this reference is also optional, we need to nullify ref in case we don't find the it. Otherwise fwnode_handle_put() breaks.

Got it (I hope).
Lemme go through it again and issue a v4.

Quoted 9 lines

We also need to use ptr error logic in the other places where fwnode_find_reference() is used. Although, in the other cases the ref is mandatory, so there's no need to care with breaking fwnode_handle_put().

After these changes (I think the changes are straight enough; but I can re-test if you or Jonathan ask for it):

I think of v4 where I may add this, but still would be nice to re-review and check if I got correctly your testing report.

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#6 lore raw

Re: [PATCH v3 3/3] iio: temperature: ltc2983: Make use of device properties

In reply to Sa, Nuno

On Thu, Mar 03, 2022 at 01:31:56PM +0000, Sa, Nuno wrote:

...

Quoted 6 lines

drivers/iio/temperature/ltc2983.c static struct ltc2983_sensor *ltc2983_thermocouple_new( · line 662

Quoted 3 lines
(quoted diff) +1 -0
+	ref = fwnode_find_reference(child, "adi,cold-junction-

handle", 0);

drivers/iio/temperature/ltc2983.c +1 -0
+	if (ref) {

This is nok. It needs to be 'if (IS_ERR(ref))'. We then should return ERR_CAST() in case of errors inside the if block.

This is a good catch!

Quoted 3 lines

As this reference
is also optional, we need to nullify ref in case we don't find the it. Otherwise fwnode_handle_put() breaks.

No, this is not correct. fwnode_handle_put() is ERR_PTR aware.

Quoted 10 lines

We also need to use ptr error logic in the other places where fwnode_find_reference() is used. Although, in the other cases the ref is mandatory, so there's no need to care with breaking fwnode_handle_put().

After these changes (I think the changes are straight enough; but I can re-test if you or Jonathan ask for it):

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#7 lore raw

Re: [PATCH v3 3/3] iio: temperature: ltc2983: Make use of device properties

Quoted 11 lines · Andy Shevchenko

On Thu, Mar 03, 2022 at 01:31:56PM +0000, Sa, Nuno wrote:

...

Quoted 6 lines

drivers/iio/temperature/ltc2983.c static struct ltc2983_sensor *ltc2983_thermocouple_new( · line 662

Quoted 3 lines
(quoted diff) +1 -0
+	ref = fwnode_find_reference(child, "adi,cold-junction-

handle", 0);

drivers/iio/temperature/ltc2983.c +1 -0
+	if (ref) {

This is nok. It needs to be 'if (IS_ERR(ref))'. We then should return ERR_CAST() in case of errors inside the if block.

Quoted 7 lines

This is a good catch!

Quoted 3 lines

As this reference
is also optional, we need to nullify ref in case we don't find the it. Otherwise fwnode_handle_put() breaks.

No, this is not correct. fwnode_handle_put() is ERR_PTR aware.

Oh, the ->put() handles that, but the fwnode_call_void_op() doesn't!

This has to be fixed on fwnode level.

Quoted 9 lines
Quoted 9 lines

We also need to use ptr error logic in the other places where fwnode_find_reference() is used. Although, in the other cases the ref is mandatory, so there's no need to care with breaking fwnode_handle_put().

After these changes (I think the changes are straight enough; but I can re-test if you or Jonathan ask for it):

Signature · 2 lines
With Best Regards,
Andy Shevchenko
maintainer
#8 lore raw

RE: [PATCH v3 3/3] iio: temperature: ltc2983: Make use of device properties

Quoted 31 lines

-----Original Message-----
From: Andy Shevchenko <[email protected]>
Sent: Thursday, March 3, 2022 3:27 PM
To: Sa, Nuno <[email protected]>
Cc: [email protected]; [email protected]; Jonathan Cameron <[email protected]>; Lars-Peter Clausen <[email protected]>
Subject: Re: [PATCH v3 3/3] iio: temperature: ltc2983: Make use of device properties

[External]

Quoted 17 lines · Andy Shevchenko

On Thu, Mar 03, 2022 at 01:31:56PM +0000, Sa, Nuno wrote:

...

Quoted 6 lines

drivers/iio/temperature/ltc2983.c static struct ltc2983_sensor *ltc2983_thermocouple_new( · line 662

Quoted 3 lines
(quoted diff) +1 -0
+	ref = fwnode_find_reference(child, "adi,cold-junction-

handle", 0);

drivers/iio/temperature/ltc2983.c +1 -0
+	if (ref) {

This is nok. It needs to be 'if (IS_ERR(ref))'. We then should return ERR_CAST() in case of errors inside the if block.

This is a good catch!

Quoted 3 lines

As this reference
is also optional, we need to nullify ref in case we don't find the it. Otherwise fwnode_handle_put() breaks.

Quoted 5 lines
Quoted 1 line

No, this is not correct. fwnode_handle_put() is ERR_PTR aware.

Oh, the ->put() handles that, but the fwnode_call_void_op() doesn't!

This has to be fixed on fwnode level.

Yeah, it was crashing. Even better if you fix there...

- Nuno Sá

Quoted 4 lines

--
With Best Regards,
Andy Shevchenko

maintainer
#5 lore raw

RE: [PATCH v3 3/3] iio: temperature: ltc2983: Make use of device properties

In reply to Andy Shevchenko
Quoted 51 lines

-----Original Message-----
From: Andy Shevchenko <[email protected]>
Sent: Thursday, March 3, 2022 2:58 PM
To: Sa, Nuno <[email protected]>
Cc: [email protected]; [email protected]; Jonathan Cameron <[email protected]>; Lars-Peter Clausen <[email protected]>
Subject: Re: [PATCH v3 3/3] iio: temperature: ltc2983: Make use of device properties

[External]

Quoted 3 lines · Nuno

Hi Andy,

Good that we waited to test this patch. The fundamental logic

change

Quoted 2 lines

for fetching and writing the custom tables are fine. That said, there some issues that I had to fix to test the patch. See below...

Thanks and indeed it's a good news that we caught a bug beforehand.

Quoted 2 lines
Quoted 2 lines

From: Andy Shevchenko <[email protected]>
Sent: Thursday, February 10, 2022 2:55 PM

...

Quoted 6 lines
Quoted 6 lines
(quoted diff) +0 -1
-	phandle = of_parse_phandle(child, "adi,cold-junction-handle",

0);

drivers/iio/temperature/ltc2983.c +0 -3
-	if (phandle) {
-		ret = of_property_read_u32(phandle, "reg",
-					   &thermo-
Quoted 1 line

cold_junction_chan);

Quoted 8 lines

drivers/iio/temperature/ltc2983.c static struct ltc2983_sensor *ltc2983_thermocouple_new( · line 662

Quoted 3 lines
(quoted diff) +1 -0
+	ref = fwnode_find_reference(child, "adi,cold-junction-

handle", 0);

drivers/iio/temperature/ltc2983.c +1 -0
+	if (ref) {

This is nok. It needs to be 'if (IS_ERR(ref))'. We then should return ERR_CAST() in case of errors inside the if block. As this reference is also optional, we need to nullify ref in case we don't find the it. Otherwise fwnode_handle_put() breaks.

Got it (I hope).
Lemme go through it again and issue a v4.

Quoted 5 lines

We also need to use ptr error logic in the other places where fwnode_find_reference() is used. Although, in the other cases the ref is mandatory, so there's no need to care with breaking fwnode_handle_put().

Quoted 8 lines
Quoted 4 lines

After these changes (I think the changes are straight enough; but I can re-test if you or Jonathan ask for it):

I think of v4 where I may add this, but still would be nice to re-review and
check if I got correctly your testing report.

No problem... I will leave the setup up and re-test v4...

- Nuno Sá