kbuild: replace $(if A,A,B) with $(or A,B)
Subsystems (13)
PATCH v2 1/1 kbuild: replace $(if A,A,B) with $(or A,B)
$(or ...) is available since GNU Make 3.81, and useful to shorten the code in some places.
Covert as follows:
$(if A,A,B) --> $(or A,B)
This patch also converts:
$(if A, A, B) --> $(or A, B)
Strictly speaking, the latter is not an equivalent conversion because spaces after commas remain; if A is not empty, $(if A, A, B) expands to " A", while $(or A, B) expands to "A".
Anyway, preceding spaces are not significant in the code hunks I touched.
---
Changes in v2:
- Fix misconversion in tools/lib/perf/Makefile
- Remove spaces before the stray backslash in tools/lib/bpf/Makefile
- Mention the presence of preceding spaces is not important this case
Makefile | 8 ++++---- scripts/Makefile.build | 3 +-- scripts/Makefile.clean | 2 +- scripts/Makefile.lib | 4 ++-- tools/bpf/bpftool/Makefile | 4 ++-- tools/build/Makefile | 2 +- tools/counter/Makefile | 2 +- tools/gpio/Makefile | 2 +- tools/hv/Makefile | 2 +- tools/iio/Makefile | 2 +- tools/lib/api/Makefile | 2 +- tools/lib/bpf/Makefile | 2 +- tools/lib/perf/Makefile | 2 +- tools/lib/subcmd/Makefile | 2 +- tools/objtool/Makefile | 2 +- tools/pci/Makefile | 2 +- tools/perf/Makefile.perf | 4 ++-- tools/power/x86/intel-speed-select/Makefile | 2 +- tools/scripts/utilities.mak | 2 +- tools/spi/Makefile | 6 +++--- tools/tracing/rtla/Makefile | 2 +- tools/usb/Makefile | 2 +- 22 files changed, 30 insertions(+), 31 deletions(-)
Makefile +4 -4
@@ -1240,8 +1240,8 @@ define filechk_version.h echo \#define LINUX_VERSION_SUBLEVEL $(SUBLEVEL) endef -$(version_h): PATCHLEVEL := $(if $(PATCHLEVEL), $(PATCHLEVEL), 0) -$(version_h): SUBLEVEL := $(if $(SUBLEVEL), $(SUBLEVEL), 0) +$(version_h): PATCHLEVEL := $(or $(PATCHLEVEL), 0) +$(version_h): SUBLEVEL := $(or $(SUBLEVEL), 0) $(version_h): FORCE $(call filechk,version.h)
@@ -1624,7 +1624,7 @@ help: @$(MAKE) -f $(srctree)/Documentation/Makefile dochelp @echo '' @echo 'Architecture specific targets ($(SRCARCH)):' - @$(if $(archhelp),$(archhelp),\ + @$(or $(archhelp),\ echo ' No architecture specific help defined for $(SRCARCH)') @echo '' @$(if $(boards), \
@@ -1841,7 +1841,7 @@ $(clean-dirs): clean: $(clean-dirs) $(call cmd,rmfiles) - @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \ + @find $(or $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \ \( -name '*.[aios]' -o -name '*.ko' -o -name '.*.cmd' \ -o -name '*.ko.*' \ -o -name '*.dtb' -o -name '*.dtbo' -o -name '*.dtb.S' -o -name '*.dt.yaml' \
scripts/Makefile.build +1 -2
@@ -40,8 +40,7 @@ include $(srctree)/scripts/Makefile.compiler # The filename Kbuild has precedence over Makefile kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src)) -kbuild-file := $(if $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Kbuild,$(kbuild-dir)/Makefile) -include $(kbuild-file) +include $(or $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Makefile) include $(srctree)/scripts/Makefile.lib
scripts/Makefile.clean +1 -1
@@ -12,7 +12,7 @@ include $(srctree)/scripts/Kbuild.include # The filename Kbuild has precedence over Makefile kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src)) -include $(if $(wildcard $(kbuild-dir)/Kbuild), $(kbuild-dir)/Kbuild, $(kbuild-dir)/Makefile) +include $(or $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Makefile) # Figure out what we need to build from the various variables # ==========================================================================
scripts/Makefile.lib +2 -2
@@ -111,7 +111,7 @@ subdir-ym := $(addprefix $(obj)/,$(subdir-ym)) modname-multi = $(sort $(foreach m,$(multi-obj-ym),\ $(if $(filter $*.o, $(call suffix-search, $m, .o, -objs -y -m)),$(m:.o=)))) -__modname = $(if $(modname-multi),$(modname-multi),$(basetarget)) +__modname = $(or $(modname-multi),$(basetarget)) modname = $(subst $(space),:,$(__modname)) modfile = $(addprefix $(obj)/,$(__modname))
@@ -434,7 +434,7 @@ MKIMAGE := $(srctree)/scripts/mkuboot.sh # SRCARCH just happens to match slightly more than ARCH (on sparc), so reduces # the number of overrides in arch makefiles UIMAGE_ARCH ?= $(SRCARCH) -UIMAGE_COMPRESSION ?= $(if $(2),$(2),none) +UIMAGE_COMPRESSION ?= $(or $(2),none) UIMAGE_OPTS-y ?= UIMAGE_TYPE ?= kernel UIMAGE_LOADADDR ?= arch_must_set_this
tools/bpf/bpftool/Makefile +2 -2
@@ -78,7 +78,7 @@ CFLAGS += -O2 CFLAGS += -W -Wall -Wextra -Wno-unused-parameter -Wno-missing-field-initializers CFLAGS += $(filter-out -Wswitch-enum -Wnested-externs,$(EXTRA_WARNINGS)) CFLAGS += -DPACKAGE='"bpftool"' -D__EXPORTED_HEADERS__ \ - -I$(if $(OUTPUT),$(OUTPUT),.) \ + -I$(or $(OUTPUT),.) \ -I$(LIBBPF_INCLUDE) \ -I$(srctree)/kernel/bpf/ \ -I$(srctree)/tools/include \
@@ -186,7 +186,7 @@ endif $(OUTPUT)%.bpf.o: skeleton/%.bpf.c $(OUTPUT)vmlinux.h $(LIBBPF_BOOTSTRAP) $(QUIET_CLANG)$(CLANG) \ - -I$(if $(OUTPUT),$(OUTPUT),.) \ + -I$(or $(OUTPUT),.) \ -I$(srctree)/tools/include/uapi/ \ -I$(LIBBPF_BOOTSTRAP_INCLUDE) \ -g -O2 -Wall -target bpf -c $< -o $@
tools/build/Makefile +1 -1
@@ -36,7 +36,7 @@ TMP_O := $(if $(OUTPUT),$(OUTPUT)feature/,./) clean: $(call QUIET_CLEAN, fixdep) - $(Q)find $(if $(OUTPUT),$(OUTPUT),.) -name '*.o' -delete -o -name '\.*.cmd' -delete -o -name '\.*.d' -delete + $(Q)find $(or $(OUTPUT),.) -name '*.o' -delete -o -name '\.*.cmd' -delete -o -name '\.*.d' -delete $(Q)rm -f $(OUTPUT)fixdep $(call QUIET_CLEAN, feature-detect) ifneq ($(wildcard $(TMP_O)),)
tools/counter/Makefile +1 -1
@@ -40,7 +40,7 @@ $(OUTPUT)counter_example: $(COUNTER_EXAMPLE) clean: rm -f $(ALL_PROGRAMS) rm -rf $(OUTPUT)include/linux/counter.h - find $(if $(OUTPUT),$(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete + find $(or $(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete install: $(ALL_PROGRAMS) install -d -m 755 $(DESTDIR)$(bindir); \
tools/gpio/Makefile +1 -1
@@ -78,7 +78,7 @@ $(OUTPUT)gpio-watch: $(GPIO_WATCH_IN) clean: rm -f $(ALL_PROGRAMS) rm -f $(OUTPUT)include/linux/gpio.h - find $(if $(OUTPUT),$(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete + find $(or $(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete install: $(ALL_PROGRAMS) install -d -m 755 $(DESTDIR)$(bindir); \
tools/hv/Makefile +1 -1
@@ -47,7 +47,7 @@ $(OUTPUT)hv_fcopy_daemon: $(HV_FCOPY_DAEMON_IN) clean: rm -f $(ALL_PROGRAMS) - find $(if $(OUTPUT),$(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete + find $(or $(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete install: $(ALL_PROGRAMS) install -d -m 755 $(DESTDIR)$(sbindir); \
tools/iio/Makefile +1 -1
@@ -58,7 +58,7 @@ $(OUTPUT)iio_generic_buffer: $(IIO_GENERIC_BUFFER_IN) clean: rm -f $(ALL_PROGRAMS) rm -rf $(OUTPUT)include/linux/iio - find $(if $(OUTPUT),$(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete + find $(or $(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete install: $(ALL_PROGRAMS) install -d -m 755 $(DESTDIR)$(bindir); \
tools/lib/api/Makefile +1 -1
@@ -60,7 +60,7 @@ $(LIBFILE): $(API_IN) clean: $(call QUIET_CLEAN, libapi) $(RM) $(LIBFILE); \ - find $(if $(OUTPUT),$(OUTPUT),.) -name \*.o -or -name \*.o.cmd -or -name \*.o.d | xargs $(RM) + find $(or $(OUTPUT),.) -name \*.o -or -name \*.o.cmd -or -name \*.o.d | xargs $(RM) FORCE:
tools/lib/bpf/Makefile +1 -1
@@ -60,7 +60,7 @@ ifndef VERBOSE VERBOSE = 0 endif -INCLUDES = -I$(if $(OUTPUT),$(OUTPUT),.) \ +INCLUDES = -I$(or $(OUTPUT),.) \ -I$(srctree)/tools/include -I$(srctree)/tools/include/uapi export prefix libdir src obj
tools/lib/perf/Makefile +1 -1
@@ -153,7 +153,7 @@ $(TESTS_STATIC): $(TESTS_IN) $(LIBPERF_A) $(LIBAPI) $(QUIET_LINK)$(CC) -o $@ $^ $(TESTS_SHARED): $(TESTS_IN) $(LIBAPI) - $(QUIET_LINK)$(CC) -o $@ -L$(if $(OUTPUT),$(OUTPUT),.) $^ -lperf + $(QUIET_LINK)$(CC) -o $@ -L$(or $(OUTPUT),.) $^ -lperf make-tests: libs $(TESTS_SHARED) $(TESTS_STATIC)
tools/lib/subcmd/Makefile +1 -1
@@ -63,7 +63,7 @@ $(LIBFILE): $(SUBCMD_IN) clean: $(call QUIET_CLEAN, libsubcmd) $(RM) $(LIBFILE); \ - find $(if $(OUTPUT),$(OUTPUT),.) -name \*.o -or -name \*.o.cmd -or -name \*.o.d | xargs $(RM) + find $(or $(OUTPUT),.) -name \*.o -or -name \*.o.cmd -or -name \*.o.d | xargs $(RM) FORCE:
tools/objtool/Makefile +1 -1
@@ -13,7 +13,7 @@ srctree := $(patsubst %/,%,$(dir $(srctree))) endif SUBCMD_SRCDIR = $(srctree)/tools/lib/subcmd/ -LIBSUBCMD_OUTPUT = $(if $(OUTPUT),$(OUTPUT),$(CURDIR)/) +LIBSUBCMD_OUTPUT = $(or $(OUTPUT),$(CURDIR)/) LIBSUBCMD = $(LIBSUBCMD_OUTPUT)libsubcmd.a OBJTOOL := $(OUTPUT)objtool
tools/pci/Makefile +1 -1
@@ -42,7 +42,7 @@ $(OUTPUT)pcitest: $(PCITEST_IN) clean: rm -f $(ALL_PROGRAMS) rm -rf $(OUTPUT)include/ - find $(if $(OUTPUT),$(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete + find $(or $(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete install: $(ALL_PROGRAMS) install -d -m 755 $(DESTDIR)$(bindir); \
tools/perf/Makefile.perf +2 -2
@@ -724,7 +724,7 @@ endif # get relative building directory (to $(OUTPUT)) # and '.' if it's $(OUTPUT) itself __build-dir = $(subst $(OUTPUT),,$(dir $@)) -build-dir = $(if $(__build-dir),$(__build-dir),.) +build-dir = $(or $(__build-dir),.) prepare: $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)common-cmds.h archheaders $(drm_ioctl_array) \ $(fadvise_advice_array) \
@@ -1090,7 +1090,7 @@ bpf-skel-clean: clean:: $(LIBTRACEEVENT)-clean $(LIBAPI)-clean $(LIBBPF)-clean $(LIBSUBCMD)-clean $(LIBPERF)-clean fixdep-clean python-clean bpf-skel-clean $(call QUIET_CLEAN, core-objs) $(RM) $(LIBPERF_A) $(OUTPUT)perf-archive $(OUTPUT)perf-with-kcore $(OUTPUT)perf-iostat $(LANG_BINDINGS) - $(Q)find $(if $(OUTPUT),$(OUTPUT),.) -name '*.o' -delete -o -name '\.*.cmd' -delete -o -name '\.*.d' -delete + $(Q)find $(or $(OUTPUT),.) -name '*.o' -delete -o -name '\.*.cmd' -delete -o -name '\.*.d' -delete $(Q)$(RM) $(OUTPUT).config-detected $(call QUIET_CLEAN, core-progs) $(RM) $(ALL_PROGRAMS) perf perf-read-vdso32 perf-read-vdsox32 $(OUTPUT)pmu-events/jevents $(OUTPUT)$(LIBJVMTI).so $(call QUIET_CLEAN, core-gen) $(RM) *.spec *.pyc *.pyo */*.pyc */*.pyo $(OUTPUT)common-cmds.h TAGS tags cscope* $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)FEATURE-DUMP $(OUTPUT)util/*-bison* $(OUTPUT)util/*-flex* \
tools/power/x86/intel-speed-select/Makefile +1 -1
@@ -43,7 +43,7 @@ $(OUTPUT)intel-speed-select: $(ISST_IN) clean: rm -f $(ALL_PROGRAMS) rm -rf $(OUTPUT)include/linux/isst_if.h - find $(if $(OUTPUT),$(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete + find $(or $(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete install: $(ALL_PROGRAMS) install -d -m 755 $(DESTDIR)$(bindir); \
tools/scripts/utilities.mak +1 -1
@@ -175,5 +175,5 @@ _ge-abspath = $(if $(is-executable),$(1)) define get-executable-or-default $(if $($(1)),$(call _ge_attempt,$($(1)),$(1)),$(call _ge_attempt,$(2))) endef -_ge_attempt = $(if $(get-executable),$(get-executable),$(call _gea_err,$(2))) +_ge_attempt = $(or $(get-executable),$(call _gea_err,$(2))) _gea_err = $(if $(1),$(error Please set '$(1)' appropriately))
tools/spi/Makefile +3 -3
@@ -53,9 +53,9 @@ $(OUTPUT)spidev_fdx: $(SPIDEV_FDX_IN) clean: rm -f $(ALL_PROGRAMS) rm -rf $(OUTPUT)include/ - find $(if $(OUTPUT),$(OUTPUT),.) -name '*.o' -delete - find $(if $(OUTPUT),$(OUTPUT),.) -name '\.*.o.d' -delete - find $(if $(OUTPUT),$(OUTPUT),.) -name '\.*.o.cmd' -delete + find $(or $(OUTPUT),.) -name '*.o' -delete + find $(or $(OUTPUT),.) -name '\.*.o.d' -delete + find $(or $(OUTPUT),.) -name '\.*.o.cmd' -delete install: $(ALL_PROGRAMS) install -d -m 755 $(DESTDIR)$(bindir); \
tools/tracing/rtla/Makefile +1 -1
@@ -45,7 +45,7 @@ DATADIR := /usr/share DOCDIR := $(DATADIR)/doc MANDIR := $(DATADIR)/man LICDIR := $(DATADIR)/licenses -SRCTREE := $(if $(BUILD_SRC),$(BUILD_SRC),$(CURDIR)) +SRCTREE := $(or $(BUILD_SRC),$(CURDIR)) # If running from the tarball, man pages are stored in the Documentation # dir. If running from the kernel source, man pages are stored in
tools/usb/Makefile +1 -1
@@ -38,7 +38,7 @@ $(OUTPUT)ffs-test: $(FFS_TEST_IN) clean: rm -f $(ALL_PROGRAMS) - find $(if $(OUTPUT),$(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete -o -name '\.*.o.cmd' -delete + find $(or $(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete -o -name '\.*.o.cmd' -delete install: $(ALL_PROGRAMS) install -d -m 755 $(DESTDIR)$(bindir); \
Signature · 1 line
2.32.0
Quoted 16 lines · Masahiro Yamada
$(or ...) is available since GNU Make 3.81, and useful to shorten the code in some places.
Covert as follows:
$(if A,A,B) --> $(or A,B)This patch also converts:
$(if A, A, B) --> $(or A, B)Strictly speaking, the latter is not an equivalent conversion because spaces after commas remain; if A is not empty, $(if A, A, B) expands to " A", while $(or A, B) expands to "A".
Quoted 5 lines
Anyway, preceding spaces are not significant in the code hunks I touched.
Signed-off-by Masahiro Yamada <[email protected]>Reviewed-by Nicolas Schier <[email protected]>---
Applied to linux-kbuild.
Quoted 368 lines
Changes in v2:
- Fix misconversion intools/lib/perf/Makefile
- Remove spaces before the stray backslash intools/lib/bpf/Makefile
- Mention the presence of preceding spaces is not important this caseMakefile | 8 ++++---- scripts/Makefile.build | 3 +-- scripts/Makefile.clean | 2 +- scripts/Makefile.lib | 4 ++-- tools/bpf/bpftool/Makefile | 4 ++-- tools/build/Makefile | 2 +- tools/counter/Makefile | 2 +- tools/gpio/Makefile | 2 +- tools/hv/Makefile | 2 +- tools/iio/Makefile | 2 +- tools/lib/api/Makefile | 2 +- tools/lib/bpf/Makefile | 2 +- tools/lib/perf/Makefile | 2 +- tools/lib/subcmd/Makefile | 2 +- tools/objtool/Makefile | 2 +- tools/pci/Makefile | 2 +- tools/perf/Makefile.perf | 4 ++-- tools/power/x86/intel-speed-select/Makefile | 2 +- tools/scripts/utilities.mak | 2 +- tools/spi/Makefile | 6 +++--- tools/tracing/rtla/Makefile | 2 +- tools/usb/Makefile | 2 +- 22 files changed, 30 insertions(+), 31 deletions(-)Makefile +4
-4@@ -1240,8 +1240,8 @@ define filechk_version.h echo \#define LINUX_VERSION_SUBLEVEL $(SUBLEVEL) endef -$(version_h): PATCHLEVEL := $(if $(PATCHLEVEL), $(PATCHLEVEL), 0) -$(version_h): SUBLEVEL := $(if $(SUBLEVEL), $(SUBLEVEL), 0) +$(version_h): PATCHLEVEL := $(or $(PATCHLEVEL), 0) +$(version_h): SUBLEVEL := $(or $(SUBLEVEL), 0) $(version_h): FORCE $(call filechk,version.h)@@ -1624,7 +1624,7 @@ help: @$(MAKE) -f $(srctree)/Documentation/Makefile dochelp @echo '' @echo 'Architecture specific targets ($(SRCARCH)):' - @$(if $(archhelp),$(archhelp),\ + @$(or $(archhelp),\ echo ' No architecture specific help defined for $(SRCARCH)') @echo '' @$(if $(boards), \@@ -1841,7 +1841,7 @@ $(clean-dirs): clean: $(clean-dirs) $(call cmd,rmfiles) - @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \ + @find $(or $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \ \( -name '*.[aios]' -o -name '*.ko' -o -name '.*.cmd' \ -o -name '*.ko.*' \ -o -name '*.dtb' -o -name '*.dtbo' -o -name '*.dtb.S' -o -name '*.dt.yaml' \scripts/Makefile.build +1
-2@@ -40,8 +40,7 @@ include $(srctree)/scripts/Makefile.compiler # The filename Kbuild has precedence over Makefile kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src)) -kbuild-file := $(if $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Kbuild,$(kbuild-dir)/Makefile) -include $(kbuild-file) +include $(or $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Makefile) include $(srctree)/scripts/Makefile.libscripts/Makefile.clean +1
-1@@ -12,7 +12,7 @@ include $(srctree)/scripts/Kbuild.include # The filename Kbuild has precedence over Makefile kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src)) -include $(if $(wildcard $(kbuild-dir)/Kbuild), $(kbuild-dir)/Kbuild, $(kbuild-dir)/Makefile) +include $(or $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Makefile) # Figure out what we need to build from the various variables # ==========================================================================scripts/Makefile.lib +2
-2@@ -111,7 +111,7 @@ subdir-ym := $(addprefix $(obj)/,$(subdir-ym)) modname-multi = $(sort $(foreach m,$(multi-obj-ym),\ $(if $(filter $*.o, $(call suffix-search, $m, .o, -objs -y -m)),$(m:.o=)))) -__modname = $(if $(modname-multi),$(modname-multi),$(basetarget)) +__modname = $(or $(modname-multi),$(basetarget)) modname = $(subst $(space),:,$(__modname)) modfile = $(addprefix $(obj)/,$(__modname))@@ -434,7 +434,7 @@ MKIMAGE := $(srctree)/scripts/mkuboot.sh # SRCARCH just happens to match slightly more than ARCH (on sparc), so reduces # the number of overrides in arch makefiles UIMAGE_ARCH ?= $(SRCARCH) -UIMAGE_COMPRESSION ?= $(if $(2),$(2),none) +UIMAGE_COMPRESSION ?= $(or $(2),none) UIMAGE_OPTS-y ?= UIMAGE_TYPE ?= kernel UIMAGE_LOADADDR ?= arch_must_set_thistools/bpf/bpftool/Makefile +2
-2@@ -78,7 +78,7 @@ CFLAGS += -O2 CFLAGS += -W -Wall -Wextra -Wno-unused-parameter -Wno-missing-field-initializers CFLAGS += $(filter-out -Wswitch-enum -Wnested-externs,$(EXTRA_WARNINGS)) CFLAGS += -DPACKAGE='"bpftool"' -D__EXPORTED_HEADERS__ \ - -I$(if $(OUTPUT),$(OUTPUT),.) \ + -I$(or $(OUTPUT),.) \ -I$(LIBBPF_INCLUDE) \ -I$(srctree)/kernel/bpf/ \ -I$(srctree)/tools/include \@@ -186,7 +186,7 @@ endif $(OUTPUT)%.bpf.o: skeleton/%.bpf.c $(OUTPUT)vmlinux.h $(LIBBPF_BOOTSTRAP) $(QUIET_CLANG)$(CLANG) \ - -I$(if $(OUTPUT),$(OUTPUT),.) \ + -I$(or $(OUTPUT),.) \ -I$(srctree)/tools/include/uapi/ \ -I$(LIBBPF_BOOTSTRAP_INCLUDE) \ -g -O2 -Wall -target bpf -c $< -o $@tools/build/Makefile +1
-1@@ -36,7 +36,7 @@ TMP_O := $(if $(OUTPUT),$(OUTPUT)feature/,./) clean: $(call QUIET_CLEAN, fixdep) - $(Q)find $(if $(OUTPUT),$(OUTPUT),.) -name '*.o' -delete -o -name '\.*.cmd' -delete -o -name '\.*.d' -delete + $(Q)find $(or $(OUTPUT),.) -name '*.o' -delete -o -name '\.*.cmd' -delete -o -name '\.*.d' -delete $(Q)rm -f $(OUTPUT)fixdep $(call QUIET_CLEAN, feature-detect) ifneq ($(wildcard $(TMP_O)),)tools/counter/Makefile +1
-1@@ -40,7 +40,7 @@ $(OUTPUT)counter_example: $(COUNTER_EXAMPLE) clean: rm -f $(ALL_PROGRAMS) rm -rf $(OUTPUT)include/linux/counter.h - find $(if $(OUTPUT),$(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete + find $(or $(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete install: $(ALL_PROGRAMS) install -d -m 755 $(DESTDIR)$(bindir); \tools/gpio/Makefile +1
-1@@ -78,7 +78,7 @@ $(OUTPUT)gpio-watch: $(GPIO_WATCH_IN) clean: rm -f $(ALL_PROGRAMS) rm -f $(OUTPUT)include/linux/gpio.h - find $(if $(OUTPUT),$(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete + find $(or $(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete install: $(ALL_PROGRAMS) install -d -m 755 $(DESTDIR)$(bindir); \tools/hv/Makefile +1
-1@@ -47,7 +47,7 @@ $(OUTPUT)hv_fcopy_daemon: $(HV_FCOPY_DAEMON_IN) clean: rm -f $(ALL_PROGRAMS) - find $(if $(OUTPUT),$(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete + find $(or $(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete install: $(ALL_PROGRAMS) install -d -m 755 $(DESTDIR)$(sbindir); \tools/iio/Makefile +1
-1@@ -58,7 +58,7 @@ $(OUTPUT)iio_generic_buffer: $(IIO_GENERIC_BUFFER_IN) clean: rm -f $(ALL_PROGRAMS) rm -rf $(OUTPUT)include/linux/iio - find $(if $(OUTPUT),$(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete + find $(or $(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete install: $(ALL_PROGRAMS) install -d -m 755 $(DESTDIR)$(bindir); \tools/lib/api/Makefile +1
-1@@ -60,7 +60,7 @@ $(LIBFILE): $(API_IN) clean: $(call QUIET_CLEAN, libapi) $(RM) $(LIBFILE); \ - find $(if $(OUTPUT),$(OUTPUT),.) -name \*.o -or -name \*.o.cmd -or -name \*.o.d | xargs $(RM) + find $(or $(OUTPUT),.) -name \*.o -or -name \*.o.cmd -or -name \*.o.d | xargs $(RM) FORCE:tools/lib/bpf/Makefile +1
-1@@ -60,7 +60,7 @@ ifndef VERBOSE VERBOSE = 0 endif -INCLUDES = -I$(if $(OUTPUT),$(OUTPUT),.) \ +INCLUDES = -I$(or $(OUTPUT),.) \ -I$(srctree)/tools/include -I$(srctree)/tools/include/uapi export prefix libdir src objtools/lib/perf/Makefile +1
-1@@ -153,7 +153,7 @@ $(TESTS_STATIC): $(TESTS_IN) $(LIBPERF_A) $(LIBAPI) $(QUIET_LINK)$(CC) -o $@ $^ $(TESTS_SHARED): $(TESTS_IN) $(LIBAPI) - $(QUIET_LINK)$(CC) -o $@ -L$(if $(OUTPUT),$(OUTPUT),.) $^ -lperf + $(QUIET_LINK)$(CC) -o $@ -L$(or $(OUTPUT),.) $^ -lperf make-tests: libs $(TESTS_SHARED) $(TESTS_STATIC)tools/lib/subcmd/Makefile +1
-1@@ -63,7 +63,7 @@ $(LIBFILE): $(SUBCMD_IN) clean: $(call QUIET_CLEAN, libsubcmd) $(RM) $(LIBFILE); \ - find $(if $(OUTPUT),$(OUTPUT),.) -name \*.o -or -name \*.o.cmd -or -name \*.o.d | xargs $(RM) + find $(or $(OUTPUT),.) -name \*.o -or -name \*.o.cmd -or -name \*.o.d | xargs $(RM) FORCE:tools/objtool/Makefile +1
-1@@ -13,7 +13,7 @@ srctree := $(patsubst %/,%,$(dir $(srctree))) endif SUBCMD_SRCDIR = $(srctree)/tools/lib/subcmd/ -LIBSUBCMD_OUTPUT = $(if $(OUTPUT),$(OUTPUT),$(CURDIR)/) +LIBSUBCMD_OUTPUT = $(or $(OUTPUT),$(CURDIR)/) LIBSUBCMD = $(LIBSUBCMD_OUTPUT)libsubcmd.a OBJTOOL := $(OUTPUT)objtooltools/pci/Makefile +1
-1@@ -42,7 +42,7 @@ $(OUTPUT)pcitest: $(PCITEST_IN) clean: rm -f $(ALL_PROGRAMS) rm -rf $(OUTPUT)include/ - find $(if $(OUTPUT),$(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete + find $(or $(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete install: $(ALL_PROGRAMS) install -d -m 755 $(DESTDIR)$(bindir); \tools/perf/Makefile.perf +2
-2@@ -724,7 +724,7 @@ endif # get relative building directory (to $(OUTPUT)) # and '.' if it's $(OUTPUT) itself __build-dir = $(subst $(OUTPUT),,$(dir $@)) -build-dir = $(if $(__build-dir),$(__build-dir),.) +build-dir = $(or $(__build-dir),.) prepare: $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)common-cmds.h archheaders $(drm_ioctl_array) \ $(fadvise_advice_array) \@@ -1090,7 +1090,7 @@ bpf-skel-clean: clean:: $(LIBTRACEEVENT)-clean $(LIBAPI)-clean $(LIBBPF)-clean $(LIBSUBCMD)-clean $(LIBPERF)-clean fixdep-clean python-clean bpf-skel-clean $(call QUIET_CLEAN, core-objs) $(RM) $(LIBPERF_A) $(OUTPUT)perf-archive $(OUTPUT)perf-with-kcore $(OUTPUT)perf-iostat $(LANG_BINDINGS) - $(Q)find $(if $(OUTPUT),$(OUTPUT),.) -name '*.o' -delete -o -name '\.*.cmd' -delete -o -name '\.*.d' -delete + $(Q)find $(or $(OUTPUT),.) -name '*.o' -delete -o -name '\.*.cmd' -delete -o -name '\.*.d' -delete $(Q)$(RM) $(OUTPUT).config-detected $(call QUIET_CLEAN, core-progs) $(RM) $(ALL_PROGRAMS) perf perf-read-vdso32 perf-read-vdsox32 $(OUTPUT)pmu-events/jevents $(OUTPUT)$(LIBJVMTI).so $(call QUIET_CLEAN, core-gen) $(RM) *.spec *.pyc *.pyo */*.pyc */*.pyo $(OUTPUT)common-cmds.h TAGS tags cscope* $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)FEATURE-DUMP $(OUTPUT)util/*-bison* $(OUTPUT)util/*-flex* \tools/power/x86/intel-speed-select/Makefile +1
-1@@ -43,7 +43,7 @@ $(OUTPUT)intel-speed-select: $(ISST_IN) clean: rm -f $(ALL_PROGRAMS) rm -rf $(OUTPUT)include/linux/isst_if.h - find $(if $(OUTPUT),$(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete + find $(or $(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete install: $(ALL_PROGRAMS) install -d -m 755 $(DESTDIR)$(bindir); \tools/scripts/utilities.mak +1
-1@@ -175,5 +175,5 @@ _ge-abspath = $(if $(is-executable),$(1)) define get-executable-or-default $(if $($(1)),$(call _ge_attempt,$($(1)),$(1)),$(call _ge_attempt,$(2))) endef -_ge_attempt = $(if $(get-executable),$(get-executable),$(call _gea_err,$(2))) +_ge_attempt = $(or $(get-executable),$(call _gea_err,$(2))) _gea_err = $(if $(1),$(error Please set '$(1)' appropriately))tools/spi/Makefile +3
-3@@ -53,9 +53,9 @@ $(OUTPUT)spidev_fdx: $(SPIDEV_FDX_IN) clean: rm -f $(ALL_PROGRAMS) rm -rf $(OUTPUT)include/ - find $(if $(OUTPUT),$(OUTPUT),.) -name '*.o' -delete - find $(if $(OUTPUT),$(OUTPUT),.) -name '\.*.o.d' -delete - find $(if $(OUTPUT),$(OUTPUT),.) -name '\.*.o.cmd' -delete + find $(or $(OUTPUT),.) -name '*.o' -delete + find $(or $(OUTPUT),.) -name '\.*.o.d' -delete + find $(or $(OUTPUT),.) -name '\.*.o.cmd' -delete install: $(ALL_PROGRAMS) install -d -m 755 $(DESTDIR)$(bindir); \tools/tracing/rtla/Makefile +1
-1@@ -45,7 +45,7 @@ DATADIR := /usr/share DOCDIR := $(DATADIR)/doc MANDIR := $(DATADIR)/man LICDIR := $(DATADIR)/licenses -SRCTREE := $(if $(BUILD_SRC),$(BUILD_SRC),$(CURDIR)) +SRCTREE := $(or $(BUILD_SRC),$(CURDIR)) # If running from the tarball, man pages are stored in the Documentation # dir. If running from the kernel source, man pages are stored intools/usb/Makefile +1
-2@@ -38,7 +38,7 @@ $(OUTPUT)ffs-test: $(FFS_TEST_IN) clean: rm -f $(ALL_PROGRAMS) - find $(if $(OUTPUT),$(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete -o -name '\.*.o.cmd' -delete + find $(or $(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete -o -name '\.*.o.cmd' -delete install: $(ALL_PROGRAMS) install -d -m 755 $(DESTDIR)$(bindir); \ --2.32.0
Signature · 2 lines
Best Regards Masahiro Yamada