Skip to contentSkip to conversation

net-sysfs: add check for netdevice being present to speed_show

PATCH New Sasha Levin 1 participant 7 messages Mar 1, 2022

Subsystems (6)
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/7 net-sysfs: add check for netdevice being present to speed_show

From: suresh kumar <[email protected]>

[ Upstream commit 4224cfd7fb6523f7a9d1c8bb91bb5df1e38eb624 ]

When bringing down the netdevice or system shutdown, a panic can be triggered while accessing the sysfs path because the device is already removed.

    [  755.549084] mlx5_core 0000:12:00.1: Shutdown was called
    [  756.404455] mlx5_core 0000:12:00.0: Shutdown was called
    ...
    [  757.937260] BUG: unable to handle kernel NULL pointer dereference at           (null)
    [  758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280
    crash> bt
    ...
    PID: 12649  TASK: ffff8924108f2100  CPU: 1   COMMAND: "amsd"
    ...
     #9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778
        [exception RIP: dma_pool_alloc+0x1ab]
        RIP: ffffffff8ee11acb  RSP: ffff89240e1a3968  RFLAGS: 00010046
        RAX: 0000000000000246  RBX: ffff89243d874100  RCX: 0000000000001000
        RDX: 0000000000000000  RSI: 0000000000000246  RDI: ffff89243d874090
        RBP: ffff89240e1a39c0   R8: 000000000001f080   R9: ffff8905ffc03c00
        R10: ffffffffc04680d4  R11: ffffffff8edde9fd  R12: 00000000000080d0
        R13: ffff89243d874090  R14: ffff89243d874080  R15: 0000000000000000
        ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
    #10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core]
    #11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core]
    #12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core]
    #13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core]
    #14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core]
    #15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core]
    #16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core]
    #17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46
    #18 [ffff89240e1a3d48] speed_show at ffffffff8f277208
    #19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3
    #20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf
    #21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596
    #22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10
    #23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5
    #24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff
    #25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f
    #26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92

    crash> net_device.state ffff89443b0c0000
      state = 0x5  (__LINK_STATE_START| __LINK_STATE_NOCARRIER)

To prevent this scenario, we also make sure that the netdevice is present.

---
 net/core/net-sysfs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/core/net-sysfs.c +1 -1
index e5dc04cb55992..7a11b2d90975d 100644
@@ -203,7 +203,7 @@ static ssize_t speed_show(struct device *dev,
 	if (!rtnl_trylock())
 		return restart_syscall();
 
-	if (netif_running(netdev)) {
+	if (netif_running(netdev) && netif_device_present(netdev)) {
 		struct ethtool_link_ksettings cmd;
 
 		if (!__ethtool_get_link_ksettings(netdev, &cmd))
Signature · 1 line
2.34.1
author maintainer
#4 lore raw

PATCH 5/7 Revert "xen-netback: Check for hotplug-status existence before watching"

From: Marek Marczykowski-Górecki <[email protected]>

[ Upstream commit e8240addd0a3919e0fd7436416afe9aa6429c484 ]

This reverts commit 2afeec08ab5c86ae21952151f726bfe184f6b23d.

The reasoning in the commit was wrong - the code expected to setup the watch even if 'hotplug-status' didn't exist. In fact, it relied on the watch being fired the first time - to check if maybe 'hotplug-status' is already set to 'connected'. Not registering a watch for non-existing path (which is the case if hotplug script hasn't been executed yet), made the backend not waiting for the hotplug script to execute. This in turns, made the netfront think the interface is fully operational, while in fact it was not (the vif interface on xen-netback side might not be configured yet).

This was a workaround for 'hotplug-status' erroneously being removed. But since that is reverted now, the workaround is not necessary either.

More discussion at
https://lore.kernel.org/xen-devel/[email protected]/T/#u

---
 drivers/net/xen-netback/xenbus.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)
drivers/net/xen-netback/xenbus.c +4 -8
index 6b678ab0a31f7..6d7fb0a956452 100644
@@ -1044,15 +1044,11 @@ static void connect(struct backend_info *be)
 	xenvif_carrier_on(be->vif);
 
 	unregister_hotplug_status_watch(be);
-	if (xenbus_exists(XBT_NIL, dev->nodename, "hotplug-status")) {
-		err = xenbus_watch_pathfmt(dev, &be->hotplug_status_watch,
-					   NULL, hotplug_status_changed,
-					   "%s/%s", dev->nodename,
-					   "hotplug-status");
-		if (err)
-			goto err;
+	err = xenbus_watch_pathfmt(dev, &be->hotplug_status_watch, NULL,
+				   hotplug_status_changed,
+				   "%s/%s", dev->nodename, "hotplug-status");
+	if (!err)
 		be->have_hotplug_status_watch = 1;
-	}
 
 	netif_tx_wake_all_queues(be->vif->dev);
 
Signature · 1 line
2.34.1
author maintainer
#6 lore raw

PATCH 7/7 selftests/memfd: clean up mapping in mfd_fail_write

In reply to Sasha Levin

From: Mike Kravetz <[email protected]>

[ Upstream commit fda153c89af344d21df281009a9d046cf587ea0f ]

Running the memfd script ./run_hugetlbfs_test.sh will often end in error as follows:

memfd-hugetlb: CREATE
memfd-hugetlb: BASIC
memfd-hugetlb: SEAL-WRITE
memfd-hugetlb: SEAL-FUTURE-WRITE
memfd-hugetlb: SEAL-SHRINK fallocate(ALLOC) failed: No space left on device
./run_hugetlbfs_test.sh: line 60: 166855 Aborted (core dumped) ./memfd_test hugetlbfs
opening: ./mnt/memfd
fuse: DONE

If no hugetlb pages have been preallocated, run_hugetlbfs_test.sh will allocate 'just enough' pages to run the test. In the SEAL-FUTURE-WRITE test the mfd_fail_write routine maps the file, but does not unmap. As a result, two hugetlb pages remain reserved for the mapping. When the fallocate call in the SEAL-SHRINK test attempts allocate all hugetlb pages, it is short by the two reserved pages.

Fix by making sure to unmap in mfd_fail_write.

---
 tools/testing/selftests/memfd/memfd_test.c | 1 +
 1 file changed, 1 insertion(+)
tools/testing/selftests/memfd/memfd_test.c +1 -0
index 10baa1652fc2a..a4e520b94e431 100644
@@ -386,6 +386,7 @@ static void mfd_fail_write(int fd)
 			printf("mmap()+mprotect() didn't fail as expected\n");
 			abort();
 		}
+		munmap(p, mfd_def_size);
 	}
 
 	/* verify PUNCH_HOLE fails */
Signature · 1 line
2.34.1
author maintainer
#3 lore raw

PATCH 4/7 Revert "xen-netback: remove 'hotplug-status' once it has served its purpose"

In reply to Sasha Levin

From: Marek Marczykowski-Górecki <[email protected]>

[ Upstream commit 0f4558ae91870692ce7f509c31c9d6ee721d8cdc ]

This reverts commit 1f2565780e9b7218cf92c7630130e82dcc0fe9c2.

The 'hotplug-status' node should not be removed as long as the vif device remains configured. Otherwise the xen-netback would wait for re-running the network script even if it was already called (in case of the frontent re-connecting). But also, it _should_ be removed when the vif device is destroyed (for example when unbinding the driver) - otherwise hotplug script would not configure the device whenever it re-appear.

Moving removal of the 'hotplug-status' node was a workaround for nothing calling network script after xen-netback module is reloaded. But when vif interface is re-created (on xen-netback unbind/bind for example), the script should be called, regardless of who does that - currently this case is not handled by the toolstack, and requires manual script call. Keeping hotplug-status=connected to skip the call is wrong and leads to not configured interface.

More discussion at
https://lore.kernel.org/xen-devel/[email protected]/T/#u

---
 drivers/net/xen-netback/xenbus.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/xen-netback/xenbus.c +1 -0
index 78c56149559ce..6b678ab0a31f7 100644
@@ -499,6 +499,7 @@ static void backend_disconnect(struct backend_info *be)
 		unsigned int queue_index;
 
 		xen_unregister_watchers(vif);
+		xenbus_rm(XBT_NIL, be->dev->nodename, "hotplug-status");
 #ifdef CONFIG_DEBUG_FS
 		xenvif_debugfs_delif(vif);
 #endif /* CONFIG_DEBUG_FS */
Signature · 1 line
2.34.1
author maintainer
#5 lore raw

PATCH 6/7 tracing: Ensure trace buffer is at least 4096 bytes large

In reply to Sasha Levin

From: Sven Schnelle <[email protected]>

[ Upstream commit 7acf3a127bb7c65ff39099afd78960e77b2ca5de ]

Booting the kernel with 'trace_buf_size=1' give a warning at boot during the ftrace selftests:

[    0.892809] Running postponed tracer tests:
[    0.892893] Testing tracer function:
[    0.901899] Callback from call_rcu_tasks_trace() invoked.
[    0.983829] Callback from call_rcu_tasks_rude() invoked.
[    1.072003] .. bad ring buffer .. corrupted trace buffer ..
[    1.091944] Callback from call_rcu_tasks() invoked.
[    1.097695] PASSED
[    1.097701] Testing dynamic ftrace: .. filter failed count=0 ..FAILED!
[    1.353474] ------------[ cut here ]------------
[    1.353478] WARNING: CPU: 0 PID: 1 at kernel/trace/trace.c:1951 run_tracer_selftest+0x13c/0x1b0

Therefore enforce a minimum of 4096 bytes to make the selftest pass.

---
 kernel/trace/trace.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
kernel/trace/trace.c +6 -4
index 19a6b088f1e72..063b434c89d26 100644
@@ -1118,10 +1118,12 @@ static int __init set_buf_size(char *str)
 	if (!str)
 		return 0;
 	buf_size = memparse(str, &str);
-	/* nr_entries can not be zero */
-	if (buf_size == 0)
-		return 0;
-	trace_buf_size = buf_size;
+	/*
+	 * nr_entries can not be zero and the startup
+	 * tests require some buffer space. Therefore
+	 * ensure we have at least 4096 bytes of buffer.
+	 */
+	trace_buf_size = max(4096UL, buf_size);
 	return 1;
 }
 __setup("trace_buf_size=", set_buf_size);
Signature · 1 line
2.34.1
author maintainer
#1 lore raw

PATCH 2/7 sr9700: sanity check for packet length

In reply to Sasha Levin

From: Oliver Neukum <[email protected]>

[ Upstream commit e9da0b56fe27206b49f39805f7dcda8a89379062 ]

A malicious device can leak heap data to user space providing bogus frame lengths. Introduce a sanity check.

---
 drivers/net/usb/sr9700.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/usb/sr9700.c +1 -1
index 6ac232e52bf7c..83640628c47dd 100644
@@ -410,7 +410,7 @@ static int sr9700_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 		/* ignore the CRC length */
 		len = (skb->data[1] | (skb->data[2] << 8)) - 4;
 
-		if (len > ETH_FRAME_LEN)
+		if (len > ETH_FRAME_LEN || len > skb->len)
 			return 0;
 
 		/* the last packet of current skb */
Signature · 1 line
2.34.1
author maintainer
#2 lore raw

PATCH 3/7 gpio: Return EPROBE_DEFER if gc->to_irq is NULL

In reply to Sasha Levin

From: Shreeya Patel <[email protected]>

[ Upstream commit ae42f9288846353982e2eab181fb41e7fd8bf60f ]

We are racing the registering of .to_irq when probing the i2c driver. This results in random failure of touchscreen devices.

Following explains the race condition better.

[gpio driver] gpio driver registers gpio chip [gpio consumer] gpio is acquired
[gpio consumer] gpiod_to_irq() fails with -ENXIO [gpio driver] gpio driver registers irqchip gpiod_to_irq works at this point, but -ENXIO is fatal

We could see the following errors in dmesg logs when gc->to_irq is NULL

[2.101857] i2c_hid i2c-FTS3528:00: HID over i2c has not been provided an Int IRQ
[2.101953] i2c_hid: probe of i2c-FTS3528:00 failed with error -22

To avoid this situation, defer probing until to_irq is registered. Returning -EPROBE_DEFER would be the first step towards avoiding the failure of devices due to the race in registration of .to_irq. Final solution to this issue would be to avoid using gc irq members until they are fully initialized.

This issue has been reported many times in past and people have been using workarounds like changing the pinctrl_amd to built-in instead of loading it as a module or by adding a softdep for pinctrl_amd into the config file.

---
 drivers/gpio/gpiolib.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/gpio/gpiolib.c +10 -0
index 12472b84a71ca..b66e3f2ca1b1e 100644
@@ -3327,6 +3327,16 @@ int gpiod_to_irq(const struct gpio_desc *desc)
 
 		return retirq;
 	}
+#ifdef CONFIG_GPIOLIB_IRQCHIP
+	if (gc->irq.chip) {
+		/*
+		 * Avoid race condition with other code, which tries to lookup
+		 * an IRQ before the irqchip has been properly registered,
+		 * i.e. while gpiochip is still being brought up.
+		 */
+		return -EPROBE_DEFER;
+	}
+#endif
 	return -ENXIO;
 }
 EXPORT_SYMBOL_GPL(gpiod_to_irq);
Signature · 1 line
2.34.1