Skip to contentSkip to conversation

drivers: Fix Links to Technologic Systems web resources

PATCH In review Kris Bahnsen 3 participants 7 messages Mar 3, 2022 – Mar 29, 2022

Subsystems (2)
GPIO CAN network drivers
lore
Share & tools
lore

Kris Bahnsen

author
#0 lore raw

PATCH 1/1 drivers: Fix Links to Technologic Systems web resources

Technologic Systems has rebranded as embeddedTS with the current domain eventually going offline. Update web/doc URLs to correct resource locations.

Signed-off-by Kris Bahnsen <[email protected]>
---
 drivers/gpio/gpio-ts5500.c       | 4 ++--
 drivers/net/can/sja1000/Kconfig  | 2 +-
 drivers/net/can/sja1000/tscan1.c | 4 ++--
 3 files changed, 5 insertions(+), 5 deletions(-)
drivers/gpio/gpio-ts5500.c +2 -2
index b159e92a3612..8e03614c7a24 100644
@@ -11,11 +11,11 @@
  * Actually, the following platforms have DIO support:
  *
  * TS-5500:
- *   Documentation: http://wiki.embeddedarm.com/wiki/TS-5500
+ *   Documentation: https://docs.embeddedts.com/TS-5500
  *   Blocks: DIO1, DIO2 and LCD port.
  *
  * TS-5600:
- *   Documentation: http://wiki.embeddedarm.com/wiki/TS-5600
+ *   Documentation: https://docs.embeddedts.com/TS-5600
  *   Blocks: LCD port (identical to TS-5500 LCD).
  */
drivers/net/can/sja1000/Kconfig +1 -1
index 110071b26921..4b2f9cb17fc3 100644
@@ -107,7 +107,7 @@ config CAN_TSCAN1
 	depends on ISA
 	help
 	  This driver is for Technologic Systems' TSCAN-1 PC104 boards.
-	  http://www.embeddedarm.com/products/board-detail.php?product=TS-CAN1
+	  https://www.embeddedts.com/products/TS-CAN1
 	  The driver supports multiple boards and automatically configures them:
 	  PLD IO base addresses are read from jumpers JP1 and JP2,
 	  IRQ numbers are read from jumpers JP4 and JP5,
drivers/net/can/sja1000/tscan1.c +2 -2
index 3dbba8d61afb..749002f21e27 100644
@@ -7,8 +7,8 @@
 
 /*
  * References:
- * - Getting started with TS-CAN1, Technologic Systems, Jun 2009
- *	http://www.embeddedarm.com/documentation/ts-can1-manual.pdf
+ * - Getting started with TS-CAN1, Technologic Systems, Feb 2022
+ *	https://docs.embeddedts.com/TS-CAN1
  */
 
 #include <linux/init.h>
Signature · 1 line
2.11.0
maintainer Acked-by on v1 1/1
#1 lore raw
Quoted 8 lines · Kris Bahnsen

Technologic Systems has rebranded as embeddedTS with the current domain eventually going offline. Update web/doc URLs to correct resource locations.

Signed-off-by Kris Bahnsen <[email protected]>
---
 drivers/net/can/sja1000/Kconfig  | 2 +-
 drivers/net/can/sja1000/tscan1.c | 4 ++--

For the CAN part:

Acked-by Marc Kleine-Budde

regards,
Marc

Signature · 4 lines
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |
Acked-by on v1 1/1
#2 lore raw
In reply to Kris Bahnsen
Quoted 19 lines · Kris Bahnsen

Technologic Systems has rebranded as embeddedTS with the current domain eventually going offline. Update web/doc URLs to correct resource locations.

Signed-off-by Kris Bahnsen <[email protected]>
---
 drivers/gpio/gpio-ts5500.c       | 4 ++--
 drivers/net/can/sja1000/Kconfig  | 2 +-
 drivers/net/can/sja1000/tscan1.c | 4 ++--
 3 files changed, 5 insertions(+), 5 deletions(-)
drivers/gpio/gpio-ts5500.c +0 -0
index b159e92a3612..8e03614c7a24 100644
@@ -11,11 +11,11 @@
  * Actually, the following platforms have DIO support:
  *

drivers/gpio/gpio-ts5500.c line 20

Quoted 10 lines
drivers/gpio/gpio-ts5500.c +2 -2
  * TS-5500:
- *   Documentation: http://wiki.embeddedarm.com/wiki/TS-5500
+ *   Documentation: https://docs.embeddedts.com/TS-5500
  *   Blocks: DIO1, DIO2 and LCD port.
  *
  * TS-5600:
- *   Documentation: http://wiki.embeddedarm.com/wiki/TS-5600
+ *   Documentation: https://docs.embeddedts.com/TS-5600
  *   Blocks: LCD port (identical to TS-5500 LCD).
  */

For GPIO

Acked-by Bartosz Golaszewski <[email protected]>
Quoted 32 lines
drivers/net/can/sja1000/Kconfig +1 -1
index 110071b26921..4b2f9cb17fc3 100644
@@ -107,7 +107,7 @@ config CAN_TSCAN1
        depends on ISA
        help
          This driver is for Technologic Systems' TSCAN-1 PC104 boards.
-         http://www.embeddedarm.com/products/board-detail.php?product=TS-CAN1
+         https://www.embeddedts.com/products/TS-CAN1
          The driver supports multiple boards and automatically configures them:
          PLD IO base addresses are read from jumpers JP1 and JP2,
          IRQ numbers are read from jumpers JP4 and JP5,
drivers/net/can/sja1000/tscan1.c +2 -3
index 3dbba8d61afb..749002f21e27 100644
@@ -7,8 +7,8 @@
 
 /*
  * References:
- * - Getting started with TS-CAN1, Technologic Systems, Jun 2009
- *     http://www.embeddedarm.com/documentation/ts-can1-manual.pdf
+ * - Getting started with TS-CAN1, Technologic Systems, Feb 2022
+ *     https://docs.embeddedts.com/TS-CAN1
  */
 
 #include <linux/init.h>
--

2.11.0

author
#3 lore raw
Quoted 7 lines · Marc Kleine-Budde

For the CAN part:

Acked-by Marc Kleine-Budde

regards,
Marc

Quoted 5 lines · Bartosz Golaszewski

For GPIO

Acked-by Bartosz Golaszewski <[email protected]>

Inquiring about the status of this patch. I have not seen it show up in any repositories. Is there any other action I need to take at this time? Apologies if this time frame is normal for such a low priority patch, I am not sure what to expect. Thanks!

Kris

maintainer
#4 lore raw
Quoted 13 lines · Kris Bahnsen
Quoted 7 lines · Marc Kleine-Budde

For the CAN part:

Acked-by Marc Kleine-Budde

regards,
Marc

Quoted 3 lines · Bartosz Golaszewski

For GPIO

Quoted 8 lines
Quoted 2 lines
Acked-by Bartosz Golaszewski <[email protected]>

Inquiring about the status of this patch. I have not seen it show up in any repositories. Is there any other action I need to take at this time? Apologies if this time frame is normal for such a low priority patch, I am not sure what to expect. Thanks!

I'm taking the CAN part. I think it's best to repost the GPIO part as a separate patch.

regards,
Marc

Signature · 4 lines
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |
#5 lore raw
Quoted 19 lines · Marc Kleine-Budde
Quoted 17 lines · Kris Bahnsen
Quoted 7 lines · Marc Kleine-Budde

For the CAN part:

Acked-by Marc Kleine-Budde

regards,
Marc

Quoted 5 lines · Bartosz Golaszewski

For GPIO

Acked-by Bartosz Golaszewski <[email protected]>
Quoted 8 lines
Quoted 4 lines

Inquiring about the status of this patch. I have not seen it show up in any repositories. Is there any other action I need to take at this time? Apologies if this time frame is normal for such a low priority patch, I am not sure what to expect. Thanks!

I'm taking the CAN part. I think it's best to repost the GPIO part as a separate patch.

Yes please, and for the future: if possible separate such changes into patches aimed at different maintainers.

Bart

author
#6 lore raw
Quoted 11 lines · Bartosz Golaszewski
Quoted 4 lines · Marc Kleine-Budde

I'm taking the CAN part. I think it's best to repost the GPIO part as a separate patch.

Yes please, and for the future: if possible separate such changes into patches aimed at different maintainers.

Bart

Understood. Thank you for the information.

Kris