Skip to contentSkip to conversation

arm64: dts: broadcom: Fix boolean properties with values

PATCH In review Rob Herring 2 participants 2 messages Mar 4, 2022

Subsystems (2)
lore
Share & tools
lore

Rob Herring

author maintainer
#0 lore raw

PATCH 1/1 arm64: dts: broadcom: Fix boolean properties with values

Boolean properties in DT are present or not present and don't take a value. A property such as 'foo = <0>;' evaluated to true. IOW, the value doesn't matter.

It may have been intended that 0 values are false, but there is no change in behavior with this patch.

---
 arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts +4 -4
index ec19fbf928a1..12a4b1c03390 100644
@@ -111,8 +111,8 @@ slic@0 {
 		compatible = "silabs,si3226x";
 		reg = <0>;
 		spi-max-frequency = <5000000>;
-		spi-cpha = <1>;
-		spi-cpol = <1>;
+		spi-cpha;
+		spi-cpol;
 		pl022,hierarchy = <0>;
 		pl022,interface = <0>;
 		pl022,slave-tx-disable = <0>;
@@ -135,8 +135,8 @@ at25@0 {
 		at25,byte-len = <0x8000>;
 		at25,addr-mode = <2>;
 		at25,page-size = <64>;
-		spi-cpha = <1>;
-		spi-cpol = <1>;
+		spi-cpha;
+		spi-cpol;
 		pl022,hierarchy = <0>;
 		pl022,interface = <0>;
 		pl022,slave-tx-disable = <0>;
Signature · 1 line
2.32.0
#1 lore raw
Quoted 8 lines · Rob Herring

Boolean properties in DT are present or not present and don't take a value. A property such as 'foo = <0>;' evaluated to true. IOW, the value doesn't matter.

It may have been intended that 0 values are false, but there is no change in behavior with this patch.

Thanks, I already have queued up an identical change just a few days ago:

https://github.com/Broadcom/stblinux/commit/c953c764e505428f59ffe6afb1c73b89b5b1ac35

This will be submitted shortly for 5.18.

Signature · 1 line
Florian