ARM: dts: k3-j721s2: Correct timer frequency
PATCH 1/1 ARM: dts: k3-j721s2: Correct timer frequency
MCU Timer0 runs at 250MHz, and the clock-frequency defined in DT appears incorrect.
Without this delays in R5 SPL are 10x off.
--- arch/arm/dts/k3-j721s2-common-proc-board-u-boot.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/dts/k3-j721s2-common-proc-board-u-boot.dtsi +1 -1
@@ -40,7 +40,7 @@ compatible = "ti,omap5430-timer"; reg = <0x0 0x40400000 0x0 0x80>; ti,timer-alwon; - clock-frequency = <25000000>; + clock-frequency = <250000000>; u-boot,dm-spl; };
Signature · 1 line
2.35.1
Quoted 15 lines · Vignesh Raghavendra
MCU Timer0 runs at 250MHz, and the clock-frequency defined in DT appears incorrect.
Without this delays in R5 SPL are 10x off.
Signed-off-by Vignesh Raghavendra <[email protected]>--- arch/arm/dts/k3-j721s2-common-proc-board-u-boot.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/dts/k3-j721s2-common-proc-board-u-boot.dtsi +0
-0
arch/arm/dts/k3-j721s2-common-proc-board-u-boot.dtsi line 46
Quoted 8 lines
arch/arm/dts/k3-j721s2-common-proc-board-u-boot.dtsi +1
-1@@ -40,7 +40,7 @@ compatible = "ti,omap5430-timer"; reg = <0x0 0x40400000 0x0 0x80>; ti,timer-alwon; - clock-frequency = <25000000>; + clock-frequency = <250000000>; u-boot,dm-spl; };
Gentle ping...
Quoted 13 lines · Vignesh Raghavendra
Quoted 10 lines · Vignesh Raghavendra
MCU Timer0 runs at 250MHz, and the clock-frequency defined in DT appears incorrect.
Without this delays in R5 SPL are 10x off.
Signed-off-by Vignesh Raghavendra <[email protected]>--- arch/arm/dts/k3-j721s2-common-proc-board-u-boot.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
Quoted 15 lines
arch/arm/dts/k3-j721s2-common-proc-board-u-boot.dtsi line 45
Quoted 12 lines
arch/arm/dts/k3-j721s2-common-proc-board-u-boot.dtsi +1
-1@@ -40,7 +40,7 @@ compatible = "ti,omap5430-timer"; reg = <0x0 0x40400000 0x0 0x80>; ti,timer-alwon; - clock-frequency = <25000000>; + clock-frequency = <250000000>; u-boot,dm-spl; };Gentle ping...
Thanks for the reminder, was mislabled in patchwork.
Signature · 1 line
Tom
Quoted 6 lines · Vignesh Raghavendra
MCU Timer0 runs at 250MHz, and the clock-frequency defined in DT appears incorrect.
Without this delays in R5 SPL are 10x off.
Signed-off-by Vignesh Raghavendra <[email protected]>
Applied to u-boot/master, thanks!
Signature · 1 line
Tom