Skip to contentSkip to conversation

tracing: Three fixes

PATCH New Steven Rostedt 1 participant 4 messages Mar 10, 2022

Subsystems (4)
lore
Share & tools
lore
author maintainer
#1 lore raw

PATCH 1/3 tracing/osnoise: Do not unregister events twice

In reply to Steven Rostedt

From: Daniel Bristot de Oliveira <[email protected]>

Nicolas reported that using:

 # trace-cmd record -e all -M 10 -p osnoise --poll

Resulted in the following kernel warning:

 ------------[ cut here ]------------
 WARNING: CPU: 0 PID: 1217 at kernel/tracepoint.c:404 tracepoint_probe_unregister+0x280/0x370
 [...]
 CPU: 0 PID: 1217 Comm: trace-cmd Not tainted 5.17.0-rc6-next-20220307-nico+ #19
 RIP: 0010:tracepoint_probe_unregister+0x280/0x370
 [...]
 CR2: 00007ff919b29497 CR3: 0000000109da4005 CR4: 0000000000170ef0
 Call Trace:
  <TASK>
  osnoise_workload_stop+0x36/0x90
  tracing_set_tracer+0x108/0x260
  tracing_set_trace_write+0x94/0xd0
  ? __check_object_size.part.0+0x10a/0x150
  ? selinux_file_permission+0x104/0x150
  vfs_write+0xb5/0x290
  ksys_write+0x5f/0xe0
  do_syscall_64+0x3b/0x90
  entry_SYSCALL_64_after_hwframe+0x44/0xae
 RIP: 0033:0x7ff919a18127
 [...]
 ---[ end trace 0000000000000000 ]---

The warning complains about an attempt to unregister an unregistered tracepoint.

This happens on trace-cmd because it first stops tracing, and then switches the tracer to nop. Which is equivalent to:

  # cd /sys/kernel/tracing/
  # echo osnoise > current_tracer
  # echo 0 > tracing_on
  # echo nop > current_tracer

The osnoise tracer stops the workload when no trace instance is actually collecting data. This can be caused both by disabling tracing or disabling the tracer itself.

To avoid unregistering events twice, use the existing trace_osnoise_callback_enabled variable to check if the events (and the workload) are actually active before trying to deactivate them.

Cc Marcelo Tosatti <[email protected]>
Fixes 2fac8d6486d5 ("tracing/osnoise: Allow multiple instances of the same tracer")
---
 kernel/trace/trace_osnoise.c | 11 +++++++++++
 1 file changed, 11 insertions(+)
kernel/trace/trace_osnoise.c +11 -0
index cfddb30e65ab..2aa3efdca755 100644
@@ -2200,6 +2200,17 @@ static void osnoise_workload_stop(void)
 	if (osnoise_has_registered_instances())
 		return;
 
+	/*
+	 * If callbacks were already disabled in a previous stop
+	 * call, there is no need to disable then again.
+	 *
+	 * For instance, this happens when tracing is stopped via:
+	 * echo 0 > tracing_on
+	 * echo nop > current_tracer.
+	 */
+	if (!trace_osnoise_callback_enabled)
+		return;
+
 	trace_osnoise_callback_enabled = false;
 	/*
 	 * Make sure that ftrace_nmi_enter/exit() see
Signature · 1 line
2.34.1
author maintainer
#2 lore raw

PATCH 2/3 tracing/osnoise: Force quiescent states while tracing

In reply to Steven Rostedt

From: Nicolas Saenz Julienne <[email protected]>

At the moment running osnoise on a nohz_full CPU or uncontested FIFO priority and a PREEMPT_RCU kernel might have the side effect of extending grace periods too much. This will entice RCU to force a context switch on the wayward CPU to end the grace period, all while introducing unwarranted noise into the tracer. This behaviour is unavoidable as overly extending grace periods might exhaust the system's memory.

This same exact problem is what extended quiescent states (EQS) were created for, conversely, rcu_momentary_dyntick_idle() emulates them by performing a zero duration EQS. So let's make use of it.

In the common case rcu_momentary_dyntick_idle() is fairly inexpensive:
atomically incrementing a local per-CPU counter and doing a store. So it shouldn't affect osnoise's measurements (which has a 1us granularity), so we'll call it unanimously.

The uncommon case involve calling rcu_momentary_dyntick_idle() after having the osnoise process:

- Receive an expedited quiescent state IPI with preemption disabled or during an RCU critical section. (activates rdp->cpu_no_qs.b.exp code-path).

- Being preempted within in an RCU critical section and having the subsequent outermost rcu_read_unlock() called with interrupts disabled. (t->rcu_read_unlock_special.b.blocked code-path).

Neither of those are possible at the moment, and are unlikely to be in the future given the osnoise's loop design. On top of this, the noise generated by the situations described above is unavoidable, and if not exposed by rcu_momentary_dyntick_idle() will be eventually seen in subsequent rcu_read_unlock() calls or schedule operations.

---
 kernel/trace/trace_osnoise.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
kernel/trace/trace_osnoise.c +20 -0
index 2aa3efdca755..5e3c62a08fc0 100644
@@ -1386,6 +1386,26 @@ static int run_osnoise(void)
 					osnoise_stop_tracing();
 		}
 
+		/*
+		 * In some cases, notably when running on a nohz_full CPU with
+		 * a stopped tick PREEMPT_RCU has no way to account for QSs.
+		 * This will eventually cause unwarranted noise as PREEMPT_RCU
+		 * will force preemption as the means of ending the current
+		 * grace period. We avoid this problem by calling
+		 * rcu_momentary_dyntick_idle(), which performs a zero duration
+		 * EQS allowing PREEMPT_RCU to end the current grace period.
+		 * This call shouldn't be wrapped inside an RCU critical
+		 * section.
+		 *
+		 * Note that in non PREEMPT_RCU kernels QSs are handled through
+		 * cond_resched()
+		 */
+		if (IS_ENABLED(CONFIG_PREEMPT_RCU)) {
+			local_irq_disable();
+			rcu_momentary_dyntick_idle();
+			local_irq_enable();
+		}
+
 		/*
 		 * For the non-preemptive kernel config: let threads runs, if
 		 * they so wish.
Signature · 1 line
2.34.1

Steven Rostedt

author maintainer
#0 lore raw

cover tracing: Three fixes

Minor tracing fixes:

- Fix unregistering the same event twice a the user could disable the event osnoise will disable on unregistering.

- Inform RCU of a quiescent state in the osnoise testing thread.

- Fix some kerneldoc comments.

Daniel Bristot de Oliveira (1):
tracing/osnoise: Do not unregister events twice

Jiapeng Chong (1):
ftrace: Fix some W=1 warnings in kernel doc comments

Nicolas Saenz Julienne (1):
tracing/osnoise: Force quiescent states while tracing

----

 kernel/trace/ftrace.c        |  4 ++--
 kernel/trace/trace_osnoise.c | 31 +++++++++++++++++++++++++++++++
 2 files changed, 33 insertions(+), 2 deletions(-)
author maintainer
#3 lore raw

PATCH 3/3 ftrace: Fix some W=1 warnings in kernel doc comments

From: Jiapeng Chong <[email protected]>

Clean up the following clang-w1 warning:

kernel/trace/ftrace.c:7827: warning: Function parameter or member 'ops' not described in 'unregister_ftrace_function'.

kernel/trace/ftrace.c:7805: warning: Function parameter or member 'ops' not described in 'register_ftrace_function'.

---
 kernel/trace/ftrace.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
kernel/trace/ftrace.c +2 -2
index a4b462b6f944..6105b7036482 100644
@@ -7790,7 +7790,7 @@ int ftrace_is_dead(void)
 
 /**
  * register_ftrace_function - register a function for profiling
- * @ops - ops structure that holds the function for profiling.
+ * @ops:	ops structure that holds the function for profiling.
  *
  * Register a function to be called by all functions in the
  * kernel.
@@ -7817,7 +7817,7 @@ EXPORT_SYMBOL_GPL(register_ftrace_function);
 
 /**
  * unregister_ftrace_function - unregister a function for profiling.
- * @ops - ops structure that holds the function to unregister
+ * @ops:	ops structure that holds the function to unregister
  *
  * Unregister a function that was added to be called by ftrace profiling.
  */
Signature · 1 line
2.34.1