Skip to contentSkip to conversation

Input: iqs5xx - use local input_dev pointer

PATCH Applied Jeff LaBundy 2 participants 2 messages Mar 20, 2022 – Mar 21, 2022

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Input: iqs5xx - use local input_dev pointer

Both iqs5xx_axis_init() and iqs5xx_irq() already define a local input_dev pointer 'input'. Use this instead of iqs5xx->input so as to make the code a bit smaller.

---
 drivers/input/touchscreen/iqs5xx.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
drivers/input/touchscreen/iqs5xx.c +8 -8
index b3fa71213d60..34c4cca57d13 100644
@@ -486,11 +486,11 @@ static int iqs5xx_axis_init(struct i2c_client *client)
 {
 	struct iqs5xx_private *iqs5xx = i2c_get_clientdata(client);
 	struct touchscreen_properties *prop = &iqs5xx->prop;
-	struct input_dev *input;
+	struct input_dev *input = iqs5xx->input;
 	u16 max_x, max_y;
 	int error;
 
-	if (!iqs5xx->input) {
+	if (!input) {
 		input = devm_input_allocate_device(&client->dev);
 		if (!input)
 			return -ENOMEM;
@@ -512,11 +512,11 @@ static int iqs5xx_axis_init(struct i2c_client *client)
 	if (error)
 		return error;
 
-	input_set_abs_params(iqs5xx->input, ABS_MT_POSITION_X, 0, max_x, 0, 0);
-	input_set_abs_params(iqs5xx->input, ABS_MT_POSITION_Y, 0, max_y, 0, 0);
-	input_set_abs_params(iqs5xx->input, ABS_MT_PRESSURE, 0, U16_MAX, 0, 0);
+	input_set_abs_params(input, ABS_MT_POSITION_X, 0, max_x, 0, 0);
+	input_set_abs_params(input, ABS_MT_POSITION_Y, 0, max_y, 0, 0);
+	input_set_abs_params(input, ABS_MT_PRESSURE, 0, U16_MAX, 0, 0);
 
-	touchscreen_parse_properties(iqs5xx->input, true, prop);
+	touchscreen_parse_properties(input, true, prop);
 
 	/*
 	 * The device reserves 0xFFFF for coordinates that correspond to slots
@@ -540,7 +540,7 @@ static int iqs5xx_axis_init(struct i2c_client *client)
 			return error;
 	}
 
-	error = input_mt_init_slots(iqs5xx->input, IQS5XX_NUM_CONTACTS,
+	error = input_mt_init_slots(input, IQS5XX_NUM_CONTACTS,
 				    INPUT_MT_DIRECT);
 	if (error)
 		dev_err(&client->dev, "Failed to initialize slots: %d\n",
@@ -674,7 +674,7 @@ static irqreturn_t iqs5xx_irq(int irq, void *data)
 		input_mt_slot(input, i);
 		if (input_mt_report_slot_state(input, MT_TOOL_FINGER,
 					       pressure != 0)) {
-			touchscreen_report_pos(iqs5xx->input, &iqs5xx->prop,
+			touchscreen_report_pos(input, &iqs5xx->prop,
 					       be16_to_cpu(touch_data->abs_x),
 					       be16_to_cpu(touch_data->abs_y),
 					       true);
Signature · 1 line
2.25.1
maintainer Applied
#1 lore raw
Quoted 5 lines · Jeff LaBundy

Both iqs5xx_axis_init() and iqs5xx_irq() already define a local input_dev pointer 'input'. Use this instead of iqs5xx->input so as to make the code a bit smaller.

Applied, thank you.

Signature · 1 line
Dmitry