arm: bcmbca: introduce the bcmbca architecture and 47622 SOC
William Zhang
maintainercover arm: bcmbca: introduce the bcmbca architecture and 47622 SOC
This change introduces Broadcom's ARCH_BCMBCA architecture for armv7 and armv8 based Broadband SoCs. We expect to send additional patches for each SoC in the near future.
William Zhang (1):
arm: bcmbca: introduce the bcmbca architecture and 47622 SOC
MAINTAINERS | 11 ++++++++ arch/arm/Kconfig | 7 ++++++ arch/arm/Makefile | 1 + arch/arm/dts/Makefile | 3 +++ arch/arm/dts/bcm47622.dtsi | 25 ++++++++++++++++++ arch/arm/dts/bcm947622.dts | 31 +++++++++++++++++++++++ arch/arm/mach-bcmbca/Kconfig | 17 +++++++++++++ arch/arm/mach-bcmbca/Makefile | 6 +++++ arch/arm/mach-bcmbca/bcm47622/Kconfig | 17 +++++++++++++ arch/arm/mach-bcmbca/bcm47622/Makefile | 5 ++++ board/broadcom/bcmbca/Kconfig | 17 +++++++++++++ board/broadcom/bcmbca/Makefile | 5 ++++ board/broadcom/bcmbca/board.c | 35 ++++++++++++++++++++++++++ configs/bcm947622_defconfig | 18 +++++++++++++ include/configs/bcm947622.h | 21 ++++++++++++++++ 15 files changed, 219 insertions(+) create mode 100644 arch/arm/dts/bcm47622.dtsi create mode 100644 arch/arm/dts/bcm947622.dts create mode 100644 arch/arm/mach-bcmbca/Kconfig create mode 100644 arch/arm/mach-bcmbca/Makefile create mode 100644 arch/arm/mach-bcmbca/bcm47622/Kconfig create mode 100644 arch/arm/mach-bcmbca/bcm47622/Makefile create mode 100644 board/broadcom/bcmbca/Kconfig create mode 100644 board/broadcom/bcmbca/Makefile create mode 100644 board/broadcom/bcmbca/board.c create mode 100644 configs/bcm947622_defconfig create mode 100644 include/configs/bcm947622.h
Signature · 1 line
2.17.1
William Zhang
maintainerPATCH 1/1 arm: bcmbca: introduce the bcmbca architecture and 47622 SOC
This is the initial support for Broadcom's ARM-based 47622 SOC.
In this change, our first SOC is an armv7 platform called 47622. The initial support includes a bare-bone implementation and dts with ARM PL011 uart.
The SOC-specific code resides in arch/arm/mach-bcmbca/<soc> and board related code is in board/broadcom/bcmba.
The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there.
---
MAINTAINERS | 11 ++++++++ arch/arm/Kconfig | 7 ++++++ arch/arm/Makefile | 1 + arch/arm/dts/Makefile | 3 +++ arch/arm/dts/bcm47622.dtsi | 25 ++++++++++++++++++ arch/arm/dts/bcm947622.dts | 31 +++++++++++++++++++++++ arch/arm/mach-bcmbca/Kconfig | 17 +++++++++++++ arch/arm/mach-bcmbca/Makefile | 6 +++++ arch/arm/mach-bcmbca/bcm47622/Kconfig | 17 +++++++++++++ arch/arm/mach-bcmbca/bcm47622/Makefile | 5 ++++ board/broadcom/bcmbca/Kconfig | 17 +++++++++++++ board/broadcom/bcmbca/Makefile | 5 ++++ board/broadcom/bcmbca/board.c | 35 ++++++++++++++++++++++++++ configs/bcm947622_defconfig | 18 +++++++++++++ include/configs/bcm947622.h | 21 ++++++++++++++++ 15 files changed, 219 insertions(+) create mode 100644 arch/arm/dts/bcm47622.dtsi create mode 100644 arch/arm/dts/bcm947622.dts create mode 100644 arch/arm/mach-bcmbca/Kconfig create mode 100644 arch/arm/mach-bcmbca/Makefile create mode 100644 arch/arm/mach-bcmbca/bcm47622/Kconfig create mode 100644 arch/arm/mach-bcmbca/bcm47622/Makefile create mode 100644 board/broadcom/bcmbca/Kconfig create mode 100644 board/broadcom/bcmbca/Makefile create mode 100644 board/broadcom/bcmbca/board.c create mode 100644 configs/bcm947622_defconfig create mode 100644 include/configs/bcm947622.h
MAINTAINERS +11 -0
@@ -195,6 +195,17 @@ F: drivers/pinctrl/broadcom/ F: configs/rpi_* T: git https://source.denx.de/u-boot/custodians/u-boot-arm.git +ARM BROADCOM BCMBCA +M: Anand Gore <[email protected]> +M: William Zhang <[email protected]> +M: Kursad Oney <[email protected]> +M: Joel Peshkin <[email protected]> +S: Maintained +F: arch/arm/mach-bcmbca/ +F: board/broadcom/bcmbca/ +F: configs/bcm947622_defconfig +F: include/configs/bcm947622.h + ARM BROADCOM BCMSTB M: Thomas Fitzsimmons <[email protected]> S: Maintained
arch/arm/Kconfig +7 -0
@@ -641,6 +641,11 @@ config ARCH_BCMSTB This enables support for Broadcom ARM-based set-top box chipsets, including the 7445 family of chips. +config ARCH_BCMBCA + bool "Broadcom broadband chip family" + select DM + select OF_CONTROL + config TARGET_VEXPRESS_CA9X4 bool "Support vexpress_ca9x4" select CPU_V7A
@@ -2092,6 +2097,8 @@ source "arch/arm/mach-at91/Kconfig" source "arch/arm/mach-bcm283x/Kconfig" +source "arch/arm/mach-bcmbca/Kconfig" + source "arch/arm/mach-bcmstb/Kconfig" source "arch/arm/mach-davinci/Kconfig"
arch/arm/Makefile +1 -0
@@ -59,6 +59,7 @@ machine-$(CONFIG_ARCH_APPLE) += apple machine-$(CONFIG_ARCH_ASPEED) += aspeed machine-$(CONFIG_ARCH_AT91) += at91 machine-$(CONFIG_ARCH_BCM283X) += bcm283x +machine-$(CONFIG_ARCH_BCMBCA) += bcmbca machine-$(CONFIG_ARCH_BCMSTB) += bcmstb machine-$(CONFIG_ARCH_DAVINCI) += davinci machine-$(CONFIG_ARCH_EXYNOS) += exynos
arch/arm/dts/Makefile +3 -0
@@ -1112,6 +1112,9 @@ dtb-$(CONFIG_TARGET_BCMNS3) += ns3-board.dtb dtb-$(CONFIG_ARCH_BCMSTB) += bcm7xxx.dtb +dtb-$(CONFIG_BCM47622) += \ + bcm947622.dtb + dtb-$(CONFIG_ASPEED_AST2500) += ast2500-evb.dtb dtb-$(CONFIG_ASPEED_AST2600) += ast2600-evb.dtb
arch/arm/dts/bcm47622.dtsi new file +25 -0
@@ -0,0 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019 Broadcom Ltd. + */ + +#include "skeleton.dtsi" + +/ { + compatible = "brcm,bcm47622"; + #address-cells = <0x1>; + #size-cells = <0x1>; + + ubus@ff800000 { + compatible = "simple-bus"; + #address-cells = <0x1>; + #size-cells = <0x1>; + + uart0: serial@ff812000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xff812000 0x1000>; + clock = <50000000>; + status = "disabled"; + }; + }; +};
arch/arm/dts/bcm947622.dts new file +31 -0
@@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2019 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm47622.dtsi" + +/ { + model = "Broadcom bcm947622"; + compatible = "broadcom,bcm947622", "brcm,bcm947622"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; +
arch/arm/mach-bcmbca/Kconfig new file +17 -0
@@ -0,0 +1,17 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2022 Broadcom Ltd +# + +if ARCH_BCMBCA + +config BCM47622 + bool "Support for Broadcom 47622 Family" + select SYS_ARCH_TIMER + select CPU_V7A + select DM_SERIAL + select PL01X_SERIAL + +endif + +source "arch/arm/mach-bcmbca/bcm47622/Kconfig"
arch/arm/mach-bcmbca/Makefile new file +6 -0
@@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2022 Broadcom Ltd +# + +obj-$(CONFIG_BCM47622) += bcm47622/
arch/arm/mach-bcmbca/bcm47622/Kconfig new file +17 -0
@@ -0,0 +1,17 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2022 Broadcom Ltd +# + +if BCM47622 + +config TARGET_BCM947622 + bool "Broadcom 47622 Reference Board" + depends on ARCH_BCMBCA + +config SYS_SOC + default "bcm47622" + +source "board/broadcom/bcmbca/Kconfig" + +endif
arch/arm/mach-bcmbca/bcm47622/Makefile new file +5 -0
@@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2022 Broadcom Ltd +# +obj- += dummy.o
board/broadcom/bcmbca/Kconfig new file +17 -0
@@ -0,0 +1,17 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2022 Broadcom Ltd +# + +config SYS_BOARD + default "bcmbca" + +config SYS_VENDOR + default "broadcom" + +if TARGET_BCM947622 + +config SYS_CONFIG_NAME + default "bcm947622" + +endif
board/broadcom/bcmbca/Makefile new file +5 -0
@@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2022 Broadcom Ltd + +obj-y += board.o
board/broadcom/bcmbca/board.c new file +35 -0
@@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* (C) Copyright 2022 Broadcom Ltd. +*/ + +#include <common.h> +#include <fdtdec.h> + +int board_init (void ) +{ +return 0 ; +} + +int dram_init (void ) +{ +if (fdtdec_setup_mem_size_base () !=0 ) +puts ("fdtdec_setup_mem_size_base() has failed\n" ); + +return 0 ; +} + +int dram_init_banksize (void ) +{ +fdtdec_setup_memory_banksize (); +return 0 ; +} + +int print_cpuinfo (void ) +{ +return 0 ; +} + +void reset_cpu (ulong addr) +{ +}
configs/bcm947622_defconfig new file +18 -0
@@ -0,0 +1,18 @@ +CONFIG_ARM=y +CONFIG_ARCH_BCMBCA=y +CONFIG_SYS_TEXT_BASE=0x10000000 +CONFIG_SYS_MALLOC_LEN=0x2000000 +CONFIG_SYS_MALLOC_F_LEN=0x8000 +CONFIG_BCM47622=y +CONFIG_TARGET_BCM947622=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_DEFAULT_DEVICE_TREE="bcm947622" +CONFIG_IDENT_STRING=" Broadcom BCM47622" +CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_SYS_LOAD_ADDR=0x10000000 +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_CACHE=y +CONFIG_OF_EMBED=y +CONFIG_CLK=y
include/configs/bcm947622.h new file +21 -0
@@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* (C) Copyright 2022 Broadcom Ltd. +*/ + +#ifndef __BCM947622_H +#define __BCM947622_H +#include <linux/sizes.h> + +#define CONFIG_SYS_MAXARGS 64 +#define CONFIG_SYS_BOOTM_LEN (32 * 1024 * 1024) + +/* UART */ +#define CONFIG_SYS_BAUDRATE_TABLE { 115200 } + +#define CONFIG_SYS_SDRAM_BASE 0x00000000 + +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_16M) + +#define COUNTER_FREQUENCY 50000000 +#endif
Signature · 1 line
2.17.1
Quoted 15 lines · William Zhang
This is the initial support for Broadcom's ARM-based 47622 SOC.
In this change, our first SOC is an armv7 platform called 47622. The initial support includes a bare-bone implementation and dts with ARM PL011 uart.
The SOC-specific code resides in arch/arm/mach-bcmbca/<soc> and board related code is in board/broadcom/bcmba.
The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there.
Signed-off-by William Zhang <[email protected]>Signed-off-by Kursad Oney <[email protected]>Signed-off-by Anand Gore <[email protected]>
Quoted 8 lines
---
MAINTAINERS | 11 ++++++++ arch/arm/Kconfig | 7 ++++++ arch/arm/Makefile | 1 + arch/arm/dts/Makefile | 3 +++ arch/arm/dts/bcm47622.dtsi | 25 ++++++++++++++++++ arch/arm/dts/bcm947622.dts | 31 +++++++++++++++++++++++
What is the status of these dts files with upstream Linux kernel? Thanks.
Signature · 1 line
Tom
William Zhang
maintainerHi Tom,
We haven't upstream to linux yet but it is in our plan.
Thanks,
William
Quoted 31 lines · Tom Rini
Quoted 15 lines · William Zhang
This is the initial support for Broadcom's ARM-based 47622 SOC.
In this change, our first SOC is an armv7 platform called 47622. The initial support includes a bare-bone implementation and dts with ARM PL011 uart.
The SOC-specific code resides in arch/arm/mach-bcmbca/<soc> and board related code is in board/broadcom/bcmba.
The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there.
Signed-off-by William Zhang <[email protected]>Signed-off-by Kursad Oney <[email protected]>Signed-off-by Anand Gore <[email protected]>Quoted 8 lines
---
MAINTAINERS | 11 ++++++++ arch/arm/Kconfig | 7 ++++++ arch/arm/Makefile | 1 + arch/arm/dts/Makefile | 3 +++ arch/arm/dts/bcm47622.dtsi | 25 ++++++++++++++++++ arch/arm/dts/bcm947622.dts | 31 +++++++++++++++++++++++What is the status of these dts files with upstream Linux kernel? Thanks.
--
Tom
William Zhang
maintainerHi Tom,
Quoted 25 lines · Tom Rini
Quoted 15 lines · William Zhang
This is the initial support for Broadcom's ARM-based 47622 SOC.
In this change, our first SOC is an armv7 platform called 47622. The initial support includes a bare-bone implementation and dts with ARM PL011 uart.
The SOC-specific code resides in arch/arm/mach-bcmbca/<soc> and board related code is in board/broadcom/bcmba.
The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there.
Signed-off-by William Zhang <[email protected]>Signed-off-by Kursad Oney <[email protected]>Signed-off-by Anand Gore <[email protected]>Quoted 8 lines
---
MAINTAINERS | 11 ++++++++ arch/arm/Kconfig | 7 ++++++ arch/arm/Makefile | 1 + arch/arm/dts/Makefile | 3 +++ arch/arm/dts/bcm47622.dtsi | 25 ++++++++++++++++++ arch/arm/dts/bcm947622.dts | 31 +++++++++++++++++++++++
Quoted 3 lines
What is the status of these dts files with upstream Linux kernel? Thanks.
Sorry my reply yesterday was from an wrong email client and format. Try it again with thunderbird plan text mode.
We haven't upstream to linux support yet but it is in our plan.
Thanks,
William
Quoted 28 lines · William Zhang
Hi Tom,
Quoted 25 lines · Tom Rini
Quoted 23 lines · William Zhang
This is the initial support for Broadcom's ARM-based 47622 SOC.
In this change, our first SOC is an armv7 platform called 47622. The initial support includes a bare-bone implementation and dts with ARM PL011 uart.
The SOC-specific code resides in arch/arm/mach-bcmbca/<soc> and board related code is in board/broadcom/bcmba.
The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there.
Signed-off-by William Zhang <[email protected]>Signed-off-by Kursad Oney <[email protected]>Signed-off-by Anand Gore <[email protected]>---
MAINTAINERS | 11 ++++++++ arch/arm/Kconfig | 7 ++++++ arch/arm/Makefile | 1 + arch/arm/dts/Makefile | 3 +++ arch/arm/dts/bcm47622.dtsi | 25 ++++++++++++++++++ arch/arm/dts/bcm947622.dts | 31 +++++++++++++++++++++++
Quoted 7 lines
Quoted 3 lines
What is the status of these dts files with upstream Linux kernel? Thanks.
Sorry my reply yesterday was from an wrong email client and format. Try it again with thunderbird plan text mode.
We haven't upstream to linux support yet but it is in our plan.
OK. The device tree needs to get reviewed and accepted in to linux-next at least first. For skeleton trees like this, it should not be too hard. Thanks.
Signature · 1 line
Tom
William Zhang
maintainerQuoted 32 lines · Tom Rini
Quoted 31 lines · William Zhang
Hi Tom,
Quoted 28 lines · Tom Rini
Quoted 15 lines · William Zhang
This is the initial support for Broadcom's ARM-based 47622 SOC.
In this change, our first SOC is an armv7 platform called 47622. The initial support includes a bare-bone implementation and dts with ARM PL011 uart.
The SOC-specific code resides in arch/arm/mach-bcmbca/<soc> and board related code is in board/broadcom/bcmba.
The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there.
Signed-off-by William Zhang <[email protected]>Signed-off-by Kursad Oney <[email protected]>Signed-off-by Anand Gore <[email protected]>Quoted 8 lines
---
MAINTAINERS | 11 ++++++++ arch/arm/Kconfig | 7 ++++++ arch/arm/Makefile | 1 + arch/arm/dts/Makefile | 3 +++ arch/arm/dts/bcm47622.dtsi | 25 ++++++++++++++++++ arch/arm/dts/bcm947622.dts | 31 +++++++++++++++++++++++What is the status of these dts files with upstream Linux kernel? Thanks.
Quoted 9 lines
Quoted 4 lines
Sorry my reply yesterday was from an wrong email client and format. Try it again with thunderbird plan text mode.
We haven't upstream to linux support yet but it is in our plan.
OK. The device tree needs to get reviewed and accepted in to linux-next at least first. For skeleton trees like this, it should not be too hard. Thanks.
Okay. We will work on the linux device tree first then.
On Wed, 23 Mar 2022 19:03:48 -0700
William Zhang <[email protected]> wrote:
Hi,
Quoted 5 lines
This is the initial support for Broadcom's ARM-based 47622 SOC.
In this change, our first SOC is an armv7 platform called 47622. The initial support includes a bare-bone implementation and dts with ARM PL011 uart.
As Tom said, you need to run the DT through the kernel review first. To maybe save you one round there, see below my comments.
Quoted 118 lines
The SOC-specific code resides in arch/arm/mach-bcmbca/<soc> and board related code is in board/broadcom/bcmba.
The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there.
Signed-off-by William Zhang <[email protected]>Signed-off-by Kursad Oney <[email protected]>Signed-off-by Anand Gore <[email protected]>---
MAINTAINERS | 11 ++++++++ arch/arm/Kconfig | 7 ++++++ arch/arm/Makefile | 1 + arch/arm/dts/Makefile | 3 +++ arch/arm/dts/bcm47622.dtsi | 25 ++++++++++++++++++ arch/arm/dts/bcm947622.dts | 31 +++++++++++++++++++++++ arch/arm/mach-bcmbca/Kconfig | 17 +++++++++++++ arch/arm/mach-bcmbca/Makefile | 6 +++++ arch/arm/mach-bcmbca/bcm47622/Kconfig | 17 +++++++++++++ arch/arm/mach-bcmbca/bcm47622/Makefile | 5 ++++ board/broadcom/bcmbca/Kconfig | 17 +++++++++++++ board/broadcom/bcmbca/Makefile | 5 ++++ board/broadcom/bcmbca/board.c | 35 ++++++++++++++++++++++++++ configs/bcm947622_defconfig | 18 +++++++++++++ include/configs/bcm947622.h | 21 ++++++++++++++++ 15 files changed, 219 insertions(+) create mode 100644 arch/arm/dts/bcm47622.dtsi create mode 100644 arch/arm/dts/bcm947622.dts create mode 100644 arch/arm/mach-bcmbca/Kconfig create mode 100644 arch/arm/mach-bcmbca/Makefile create mode 100644 arch/arm/mach-bcmbca/bcm47622/Kconfig create mode 100644 arch/arm/mach-bcmbca/bcm47622/Makefile create mode 100644 board/broadcom/bcmbca/Kconfig create mode 100644 board/broadcom/bcmbca/Makefile create mode 100644 board/broadcom/bcmbca/board.c create mode 100644 configs/bcm947622_defconfig create mode 100644 include/configs/bcm947622.hMAINTAINERS +11
-0@@ -195,6 +195,17 @@ F: drivers/pinctrl/broadcom/ F: configs/rpi_* T: git https://source.denx.de/u-boot/custodians/u-boot-arm.git +ARM BROADCOM BCMBCA +M: Anand Gore <[email protected]> +M: William Zhang <[email protected]> +M: Kursad Oney <[email protected]> +M: Joel Peshkin <[email protected]> +S: Maintained +F: arch/arm/mach-bcmbca/ +F: board/broadcom/bcmbca/ +F: configs/bcm947622_defconfig +F: include/configs/bcm947622.h + ARM BROADCOM BCMSTB M: Thomas Fitzsimmons <[email protected]> S: Maintainedarch/arm/Kconfig +7
-0@@ -641,6 +641,11 @@ config ARCH_BCMSTB This enables support for Broadcom ARM-based set-top box chipsets, including the 7445 family of chips. +config ARCH_BCMBCA + bool "Broadcom broadband chip family" + select DM + select OF_CONTROL + config TARGET_VEXPRESS_CA9X4 bool "Support vexpress_ca9x4" select CPU_V7A@@ -2092,6 +2097,8 @@ source "arch/arm/mach-at91/Kconfig" source "arch/arm/mach-bcm283x/Kconfig" +source "arch/arm/mach-bcmbca/Kconfig" + source "arch/arm/mach-bcmstb/Kconfig" source "arch/arm/mach-davinci/Kconfig"arch/arm/Makefile +1
-0@@ -59,6 +59,7 @@ machine-$(CONFIG_ARCH_APPLE) += apple machine-$(CONFIG_ARCH_ASPEED) += aspeed machine-$(CONFIG_ARCH_AT91) += at91 machine-$(CONFIG_ARCH_BCM283X) += bcm283x +machine-$(CONFIG_ARCH_BCMBCA) += bcmbca machine-$(CONFIG_ARCH_BCMSTB) += bcmstb machine-$(CONFIG_ARCH_DAVINCI) += davinci machine-$(CONFIG_ARCH_EXYNOS) += exynosarch/arm/dts/Makefile +3
-0@@ -1112,6 +1112,9 @@ dtb-$(CONFIG_TARGET_BCMNS3) += ns3-board.dtb dtb-$(CONFIG_ARCH_BCMSTB) += bcm7xxx.dtb +dtb-$(CONFIG_BCM47622) += \ + bcm947622.dtb + dtb-$(CONFIG_ASPEED_AST2500) += ast2500-evb.dtb dtb-$(CONFIG_ASPEED_AST2600) += ast2600-evb.dtbarch/arm/dts/bcm47622.dtsi new file +0
-0
arch/arm/dts/bcm47622.dtsi line 6
Quoted 6 lines
arch/arm/dts/bcm47622.dtsi new file +6
-0@@ -0,0 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019 Broadcom Ltd. + */ + +#include "skeleton.dtsi"
skeleton is not used anymore in the kernel.
arch/arm/dts/bcm47622.dtsi line 11
Quoted 5 lines
arch/arm/dts/bcm47622.dtsi new file +5
-0+ +/ { + compatible = "brcm,bcm47622"; + #address-cells = <0x1>; + #size-cells = <0x1>;
Just use decimals: ... = <1>;
arch/arm/dts/bcm47622.dtsi line 13
Quoted 2 lines
arch/arm/dts/bcm47622.dtsi new file +2
-0+ + ubus@ff800000 {
just: bus@ff800000 {
Actually not sure you need that at all. Are there going to be more devices later?
arch/arm/dts/bcm47622.dtsi line 21
Quoted 8 lines
arch/arm/dts/bcm47622.dtsi new file +8
-0+ compatible = "simple-bus"; + #address-cells = <0x1>; + #size-cells = <0x1>; + + uart0: serial@ff812000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xff812000 0x1000>; + clock = <50000000>;
This is not an official property. Please use a fixed-clock and the clocks property.
In general, once you have those files in the kernel tree, run your DT through "make dtbs_check". This will report a lot of unrelated failures initially, so ignore the first run, "touch" your .dts file, then re-run.
If this SoC contains Cortex-A7 cores, then please also add the GIC, arch timer and CPU nodes, for basic functionality.
Cheers,
Andre
Quoted 236 lines
arch/arm/dts/bcm47622.dtsi new file +4
-0+ status = "disabled"; + }; + }; +};arch/arm/dts/bcm947622.dts new file +31
-0@@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2019 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm47622.dtsi" + +/ { + model = "Broadcom bcm947622"; + compatible = "broadcom,bcm947622", "brcm,bcm947622"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; +arch/arm/mach-bcmbca/Kconfig new file +17
-0@@ -0,0 +1,17 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2022 Broadcom Ltd +# + +if ARCH_BCMBCA + +config BCM47622 + bool "Support for Broadcom 47622 Family" + select SYS_ARCH_TIMER + select CPU_V7A + select DM_SERIAL + select PL01X_SERIAL + +endif + +source "arch/arm/mach-bcmbca/bcm47622/Kconfig"arch/arm/mach-bcmbca/Makefile new file +6
-0@@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2022 Broadcom Ltd +# + +obj-$(CONFIG_BCM47622) += bcm47622/arch/arm/mach-bcmbca/bcm47622/Kconfig new file +17
-0@@ -0,0 +1,17 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2022 Broadcom Ltd +# + +if BCM47622 + +config TARGET_BCM947622 + bool "Broadcom 47622 Reference Board" + depends on ARCH_BCMBCA + +config SYS_SOC + default "bcm47622" + +source "board/broadcom/bcmbca/Kconfig" + +endifarch/arm/mach-bcmbca/bcm47622/Makefile new file +5
-0@@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2022 Broadcom Ltd +# +obj- += dummy.oboard/broadcom/bcmbca/Kconfig new file +17
-0@@ -0,0 +1,17 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2022 Broadcom Ltd +# + +config SYS_BOARD + default "bcmbca" + +config SYS_VENDOR + default "broadcom" + +if TARGET_BCM947622 + +config SYS_CONFIG_NAME + default "bcm947622" + +endifboard/broadcom/bcmbca/Makefile new file +5
-0@@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2022 Broadcom Ltd + +obj-y += board.oboard/broadcom/bcmbca/board.c new file +35
-0@@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* (C) Copyright 2022 Broadcom Ltd. +*/ + +#include <common.h> +#include <fdtdec.h> + +int board_init (void ) +{ +return 0 ; +} + +int dram_init (void ) +{ +if (fdtdec_setup_mem_size_base () !=0 ) +puts ("fdtdec_setup_mem_size_base() has failed\n" ); + +return 0 ; +} + +int dram_init_banksize (void ) +{ +fdtdec_setup_memory_banksize (); +return 0 ; +} + +int print_cpuinfo (void ) +{ +return 0 ; +} + +void reset_cpu (ulong addr) +{ +}configs/bcm947622_defconfig new file +18
-0@@ -0,0 +1,18 @@ +CONFIG_ARM=y +CONFIG_ARCH_BCMBCA=y +CONFIG_SYS_TEXT_BASE=0x10000000 +CONFIG_SYS_MALLOC_LEN=0x2000000 +CONFIG_SYS_MALLOC_F_LEN=0x8000 +CONFIG_BCM47622=y +CONFIG_TARGET_BCM947622=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_DEFAULT_DEVICE_TREE="bcm947622" +CONFIG_IDENT_STRING=" Broadcom BCM47622" +CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_SYS_LOAD_ADDR=0x10000000 +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_CACHE=y +CONFIG_OF_EMBED=y +CONFIG_CLK=yinclude/configs/bcm947622.h new file +21
-0@@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* (C) Copyright 2022 Broadcom Ltd. +*/ + +#ifndef __BCM947622_H +#define __BCM947622_H +#include <linux/sizes.h> + +#define CONFIG_SYS_MAXARGS 64 +#define CONFIG_SYS_BOOTM_LEN (32 * 1024 * 1024) + +/* UART */ +#define CONFIG_SYS_BAUDRATE_TABLE { 115200 } + +#define CONFIG_SYS_SDRAM_BASE 0x00000000 + +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_16M) + +#define COUNTER_FREQUENCY 50000000 +#endif
William Zhang
maintainerQuoted 5 lines · Andre Przywara
On Wed, 23 Mar 2022 19:03:48 -0700
William Zhang <[email protected]> wrote:Hi,
Quoted 9 lines
Quoted 5 lines
This is the initial support for Broadcom's ARM-based 47622 SOC.
In this change, our first SOC is an armv7 platform called 47622. The initial support includes a bare-bone implementation and dts with ARM PL011 uart.
As Tom said, you need to run the DT through the kernel review first. To maybe save you one round there, see below my comments.
Yes we are working on that.
Quoted 135 lines
Quoted 118 lines
The SOC-specific code resides in arch/arm/mach-bcmbca/<soc> and board related code is in board/broadcom/bcmba.
The u-boot image can be loaded from flash or network to the entry point address in the memory and boot from there.
Signed-off-by William Zhang <[email protected]>Signed-off-by Kursad Oney <[email protected]>Signed-off-by Anand Gore <[email protected]>---
MAINTAINERS | 11 ++++++++ arch/arm/Kconfig | 7 ++++++ arch/arm/Makefile | 1 + arch/arm/dts/Makefile | 3 +++ arch/arm/dts/bcm47622.dtsi | 25 ++++++++++++++++++ arch/arm/dts/bcm947622.dts | 31 +++++++++++++++++++++++ arch/arm/mach-bcmbca/Kconfig | 17 +++++++++++++ arch/arm/mach-bcmbca/Makefile | 6 +++++ arch/arm/mach-bcmbca/bcm47622/Kconfig | 17 +++++++++++++ arch/arm/mach-bcmbca/bcm47622/Makefile | 5 ++++ board/broadcom/bcmbca/Kconfig | 17 +++++++++++++ board/broadcom/bcmbca/Makefile | 5 ++++ board/broadcom/bcmbca/board.c | 35 ++++++++++++++++++++++++++ configs/bcm947622_defconfig | 18 +++++++++++++ include/configs/bcm947622.h | 21 ++++++++++++++++ 15 files changed, 219 insertions(+)create mode 100644
arch/arm/dts/bcm47622.dtsicreate mode 100644arch/arm/dts/bcm947622.dtscreate mode 100644arch/arm/mach-bcmbca/Kconfigcreate mode 100644arch/arm/mach-bcmbca/Makefilecreate mode 100644arch/arm/mach-bcmbca/bcm47622/Kconfigcreate mode 100644arch/arm/mach-bcmbca/bcm47622/Makefilecreate mode 100644 board/broadcom/bcmbca/Kconfig create mode 100644 board/broadcom/bcmbca/Makefile create mode 100644board/broadcom/bcmbca/board.ccreate mode 100644 configs/bcm947622_defconfig create mode 100644include/configs/bcm947622.hMAINTAINERS +11
-0@@ -195,6 +195,17 @@ F: drivers/pinctrl/broadcom/ F: configs/rpi_* T: git https://source.denx.de/u-boot/custodians/u-boot-arm.git +ARM BROADCOM BCMBCA +M: Anand Gore <[email protected]> +M: William Zhang <[email protected]> +M: Kursad Oney <[email protected]> +M: Joel Peshkin <[email protected]> +S: Maintained +F: arch/arm/mach-bcmbca/ +F: board/broadcom/bcmbca/ +F: configs/bcm947622_defconfig +F: include/configs/bcm947622.h + ARM BROADCOM BCMSTB M: Thomas Fitzsimmons <[email protected]> S: Maintainedarch/arm/Kconfig +7
-0@@ -641,6 +641,11 @@ config ARCH_BCMSTB This enables support for Broadcom ARM-based set-top box chipsets, including the 7445 family of chips. +config ARCH_BCMBCA + bool "Broadcom broadband chip family" + select DM + select OF_CONTROL + config TARGET_VEXPRESS_CA9X4 bool "Support vexpress_ca9x4" select CPU_V7A@@ -2092,6 +2097,8 @@ source "arch/arm/mach-at91/Kconfig" source "arch/arm/mach-bcm283x/Kconfig" +source "arch/arm/mach-bcmbca/Kconfig" + source "arch/arm/mach-bcmstb/Kconfig" source "arch/arm/mach-davinci/Kconfig"arch/arm/Makefile +1
-0@@ -59,6 +59,7 @@ machine-$(CONFIG_ARCH_APPLE) += apple machine-$(CONFIG_ARCH_ASPEED) += aspeed machine-$(CONFIG_ARCH_AT91) += at91 machine-$(CONFIG_ARCH_BCM283X) += bcm283x +machine-$(CONFIG_ARCH_BCMBCA) += bcmbca machine-$(CONFIG_ARCH_BCMSTB) += bcmstb machine-$(CONFIG_ARCH_DAVINCI) += davinci machine-$(CONFIG_ARCH_EXYNOS) += exynosarch/arm/dts/Makefile +3
-0@@ -1112,6 +1112,9 @@ dtb-$(CONFIG_TARGET_BCMNS3) += ns3-board.dtb dtb-$(CONFIG_ARCH_BCMSTB) += bcm7xxx.dtb +dtb-$(CONFIG_BCM47622) += \ + bcm947622.dtb + dtb-$(CONFIG_ASPEED_AST2500) += ast2500-evb.dtb dtb-$(CONFIG_ASPEED_AST2600) += ast2600-evb.dtbarch/arm/dts/bcm47622.dtsi new file +0
-0arch/arm/dts/bcm47622.dtsi line 6
Quoted 6 lines
arch/arm/dts/bcm47622.dtsi new file +6
-0@@ -0,0 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019 Broadcom Ltd. + */ + +#include "skeleton.dtsi"skeleton is not used anymore in the kernel.
arch/arm/dts/bcm47622.dtsi line 11
Quoted 5 lines
arch/arm/dts/bcm47622.dtsi new file +5
-0+ +/ { + compatible = "brcm,bcm47622"; + #address-cells = <0x1>; + #size-cells = <0x1>;Just use decimals: ... = <1>;
Quoted 8 lines
arch/arm/dts/bcm47622.dtsi line 13
Quoted 2 lines
arch/arm/dts/bcm47622.dtsi new file +2
-0+ + ubus@ff800000 {just: bus@ff800000 {
Actually not sure you need that at all. Are there going to be more devices later?
There will be more devices under this peripheral bus. I will rename it as periph.
Quoted 12 lines
arch/arm/dts/bcm47622.dtsi line 21
Quoted 8 lines
arch/arm/dts/bcm47622.dtsi new file +8
-0+ compatible = "simple-bus"; + #address-cells = <0x1>; + #size-cells = <0x1>; + + uart0: serial@ff812000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xff812000 0x1000>; + clock = <50000000>;This is not an official property. Please use a fixed-clock and the clocks property.
Quoted 6 lines
In general, once you have those files in the kernel tree, run your DT through "make
dtbs_check". This will report a lot of unrelated failures initially, so ignore the first run, "touch" your .dts file, then re-run.If this SoC contains Cortex-A7 cores, then please also add the GIC, arch timer and CPU nodes, for basic functionality.
Thanks for the feedbacks Andre! Will address all your comments in the dts we submit to kernel upstream.
Quoted 242 lines
Cheers,
AndreQuoted 236 lines
arch/arm/dts/bcm47622.dtsi new file +4
-0+ status = "disabled"; + }; + }; +};arch/arm/dts/bcm947622.dts new file +31
-0@@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2019 Broadcom Ltd. + */ + +/dts-v1/; + +#include "bcm47622.dtsi" + +/ { + model = "Broadcom bcm947622"; + compatible = "broadcom,bcm947622", "brcm,bcm947622"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; + +&uart0 { + status = "okay"; +}; +arch/arm/mach-bcmbca/Kconfig new file +17
-0@@ -0,0 +1,17 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2022 Broadcom Ltd +# + +if ARCH_BCMBCA + +config BCM47622 + bool "Support for Broadcom 47622 Family" + select SYS_ARCH_TIMER + select CPU_V7A + select DM_SERIAL + select PL01X_SERIAL + +endif + +source "arch/arm/mach-bcmbca/bcm47622/Kconfig"arch/arm/mach-bcmbca/Makefile new file +6
-0@@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2022 Broadcom Ltd +# + +obj-$(CONFIG_BCM47622) += bcm47622/arch/arm/mach-bcmbca/bcm47622/Kconfig new file +17
-0@@ -0,0 +1,17 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2022 Broadcom Ltd +# + +if BCM47622 + +config TARGET_BCM947622 + bool "Broadcom 47622 Reference Board" + depends on ARCH_BCMBCA + +config SYS_SOC + default "bcm47622" + +source "board/broadcom/bcmbca/Kconfig" + +endifarch/arm/mach-bcmbca/bcm47622/Makefile new file +5
-0@@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2022 Broadcom Ltd +# +obj- += dummy.oboard/broadcom/bcmbca/Kconfig new file +17
-0@@ -0,0 +1,17 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2022 Broadcom Ltd +# + +config SYS_BOARD + default "bcmbca" + +config SYS_VENDOR + default "broadcom" + +if TARGET_BCM947622 + +config SYS_CONFIG_NAME + default "bcm947622" + +endifboard/broadcom/bcmbca/Makefile new file +5
-0@@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2022 Broadcom Ltd + +obj-y += board.oboard/broadcom/bcmbca/board.c new file +35
-0@@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* (C) Copyright 2022 Broadcom Ltd. +*/ + +#include <common.h> +#include <fdtdec.h> + +int board_init (void ) +{ +return 0 ; +} + +int dram_init (void ) +{ +if (fdtdec_setup_mem_size_base () !=0 ) +puts ("fdtdec_setup_mem_size_base() has failed\n" ); + +return 0 ; +} + +int dram_init_banksize (void ) +{ +fdtdec_setup_memory_banksize (); +return 0 ; +} + +int print_cpuinfo (void ) +{ +return 0 ; +} + +void reset_cpu (ulong addr) +{ +}configs/bcm947622_defconfig new file +18
-0@@ -0,0 +1,18 @@ +CONFIG_ARM=y +CONFIG_ARCH_BCMBCA=y +CONFIG_SYS_TEXT_BASE=0x10000000 +CONFIG_SYS_MALLOC_LEN=0x2000000 +CONFIG_SYS_MALLOC_F_LEN=0x8000 +CONFIG_BCM47622=y +CONFIG_TARGET_BCM947622=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_DEFAULT_DEVICE_TREE="bcm947622" +CONFIG_IDENT_STRING=" Broadcom BCM47622" +CONFIG_ENV_VARS_UBOOT_CONFIG=y +CONFIG_SYS_LOAD_ADDR=0x10000000 +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_CACHE=y +CONFIG_OF_EMBED=y +CONFIG_CLK=yinclude/configs/bcm947622.h new file +21
-0@@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* (C) Copyright 2022 Broadcom Ltd. +*/ + +#ifndef __BCM947622_H +#define __BCM947622_H +#include <linux/sizes.h> + +#define CONFIG_SYS_MAXARGS 64 +#define CONFIG_SYS_BOOTM_LEN (32 * 1024 * 1024) + +/* UART */ +#define CONFIG_SYS_BAUDRATE_TABLE { 115200 } + +#define CONFIG_SYS_SDRAM_BASE 0x00000000 + +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_16M) + +#define COUNTER_FREQUENCY 50000000 +#endif