RISCV_EFI_BOOT_PROTOCOL support in linux
cover RISCV_EFI_BOOT_PROTOCOL support in linux
This patch adds support for getting the boot hart ID using new RISCV_EFI_BOOT_PROTOCOL in linux efi stub. While there is an existing solution of passing the boot hart ID through Device Tree, it doesn't work for ACPI. Hence an EFI protocol protocol is recommended which works for both DT and ACPI based platforms.
The frozen spec of this new protocol is available at
https://github.com/riscv-non-isa/riscv-uefi/releases/download/1.0-rc3/RISCV_UEFI_PROTOCOL-spec.pdf
This is tested in qemu with both u-boot and edk2.
Sunil V L (1):
riscv/efi_stub: Add support for RISCV_EFI_BOOT_PROTOCOL
drivers/firmware/efi/libstub/efistub.h | 7 ++++++ drivers/firmware/efi/libstub/riscv-stub.c | 29 +++++++++++++++++++---- include/linux/efi.h | 1 + 3 files changed, 32 insertions(+), 5 deletions(-)
Signature · 1 line
2.25.1
PATCH 1/1 riscv/efi_stub: Add support for RISCV_EFI_BOOT_PROTOCOL
This patch adds the support for getting the boot hart ID in Linux EFI stub using RISCV_EFI_BOOT_PROTOCOL. This protocol is preferred method over existing DT based solution since it works irrespective of DT or ACPI.
The specification of the protocol is hosted at:
https://github.com/riscv-non-isa/riscv-uefi
--- drivers/firmware/efi/libstub/efistub.h | 7 ++++++ drivers/firmware/efi/libstub/riscv-stub.c | 29 +++++++++++++++++++---- include/linux/efi.h | 1 + 3 files changed, 32 insertions(+), 5 deletions(-)
drivers/firmware/efi/libstub/efistub.h +7 -0
@@ -720,6 +720,13 @@ union efi_tcg2_protocol { } mixed_mode; }; +struct riscv_efi_boot_protocol { +u64 revision; + + efi_status_t (__efiapi * get_boot_hartid)(struct riscv_efi_boot_protocol *this, + size_t *boot_hartid); +}; +typedef union efi_load_file_protocol efi_load_file_protocol_t ;typedef union efi_load_file_protocol efi_load_file2_protocol_t ;
drivers/firmware/efi/libstub/riscv-stub.c +24 -5
@@ -23,7 +23,7 @@typedef void __noreturn (*jump_kernel_func )(unsigned int ,unsigned long ); -static u32 hartid; +static size_t hartid;static int get_boot_hartid_from_fdt (void ) {
@@ -47,14 +47,33 @@ static int get_boot_hartid_from_fdt(void)return 0 ; } +static efi_status_t get_boot_hartid_from_efi (void ) +{ +efi_guid_t boot_protocol_guid =RISCV_EFI_BOOT_PROTOCOL_GUID ; +efi_status_t status; +struct riscv_efi_boot_protocol *boot_protocol; + + status =efi_bs_call (locate_protocol, &boot_protocol_guid,NULL , + (void **)&boot_protocol); +if (status ==EFI_SUCCESS ) { + status =efi_call_proto (boot_protocol, + get_boot_hartid, &hartid); + } +return status; +} +efi_status_t check_platform_features (void ) {int ret; +efi_status_t status; - ret =get_boot_hartid_from_fdt (); -if (ret) { -efi_err ("/chosen/boot-hartid missing or invalid!\n" ); -return EFI_UNSUPPORTED ; + status =get_boot_hartid_from_efi (); +if (status !=EFI_SUCCESS ) { + ret =get_boot_hartid_from_fdt (); +if (ret) { +efi_err ("Failed to get boot hartid!\n" ); +return EFI_UNSUPPORTED ; + } }return EFI_SUCCESS ; }
include/linux/efi.h +1 -0
@@ -380,6 +380,7 @@ void efi_native_runtime_setup(void);#define EFI_CONSOLE_OUT_DEVICE_GUID EFI_GUID(0xd3b36f2c, 0xd551, 0x11d4, 0x9a, 0x46, 0x00, 0x90, 0x27, 0x3f, 0xc1, 0x4d)#define APPLE_PROPERTIES_PROTOCOL_GUID EFI_GUID(0x91bd12fe, 0xf6c3, 0x44fb, 0xa5, 0xb7, 0x51, 0x22, 0xab, 0x30, 0x3a, 0xe0)#define EFI_TCG2_PROTOCOL_GUID EFI_GUID(0x607f766c, 0x7455, 0x42be, 0x93, 0x0b, 0xe4, 0xd7, 0x6d, 0xb2, 0x72, 0x0f) +#define RISCV_EFI_BOOT_PROTOCOL_GUID EFI_GUID(0xccd15fec, 0x6f73, 0x4eec, 0x83, 0x95, 0x3e, 0x69, 0xe4, 0xb9, 0x40, 0xbf)#define EFI_LOAD_FILE_PROTOCOL_GUID EFI_GUID(0x56ec3091, 0x954c, 0x11d2, 0x8e, 0x3f, 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b)#define EFI_LOAD_FILE2_PROTOCOL_GUID EFI_GUID(0x4006c0c1, 0xfcb3, 0x403e, 0x99, 0x6d, 0x4a, 0x6c, 0x87, 0x24, 0xe0, 0x6d)#define EFI_RT_PROPERTIES_TABLE_GUID EFI_GUID(0xeb66918a, 0x7eef, 0x402a, 0x84, 0x2e, 0x93, 0x1d, 0x21, 0xc3, 0x8a, 0xe9)
Signature · 1 line
2.25.1
Re: [PATCH 1/1] riscv/efi_stub: Add support for RISCV_EFI_BOOT_PROTOCOL
Quoted 10 lines · Sunil V L
This patch adds the support for getting the boot hart ID in Linux EFI stub using
RISCV_EFI_BOOT_PROTOCOL. This protocol is preferred method over existing DT based solution since it works irrespective of DT or ACPI.The specification of the protocol is hosted at:
https://github.com/riscv-non-isa/riscv-uefiSigned-off-by Sunil V L <[email protected]>Acked-by Palmer Dabbelt <[email protected]>
This seems to be v3 of the patch. v2 is available in
https://lore.kernel.org/all/[email protected]/
v3 replaces a message in efi_status_t check_platform_features():
<+ efi_err("/chosen/boot-hartid missing or invalid!\n");
Quoted 1 line
+
efi_err("Failed to get boot hartid!\n");
Quoted 87 lines
--- drivers/firmware/efi/libstub/efistub.h | 7 ++++++ drivers/firmware/efi/libstub/riscv-stub.c | 29 +++++++++++++++++++---- include/linux/efi.h | 1 + 3 files changed, 32 insertions(+), 5 deletions(-)drivers/firmware/efi/libstub/efistub.h +7
-0@@ -720,6 +720,13 @@ union efi_tcg2_protocol { } mixed_mode; }; +struct riscv_efi_boot_protocol { +u64 revision; + + efi_status_t (__efiapi * get_boot_hartid)(struct riscv_efi_boot_protocol *this, + size_t *boot_hartid); +}; +typedef union efi_load_file_protocol efi_load_file_protocol_t ;typedef union efi_load_file_protocol efi_load_file2_protocol_t ;drivers/firmware/efi/libstub/riscv-stub.c +24
-5@@ -23,7 +23,7 @@typedef void __noreturn (*jump_kernel_func )(unsigned int ,unsigned long ); -static u32 hartid; +static size_t hartid;static int get_boot_hartid_from_fdt (void ) {@@ -47,14 +47,33 @@ static int get_boot_hartid_from_fdt(void)return 0 ; } +static efi_status_t get_boot_hartid_from_efi (void ) +{ +efi_guid_t boot_protocol_guid =RISCV_EFI_BOOT_PROTOCOL_GUID ; +efi_status_t status; +struct riscv_efi_boot_protocol *boot_protocol; + + status =efi_bs_call (locate_protocol, &boot_protocol_guid,NULL , + (void **)&boot_protocol); +if (status ==EFI_SUCCESS ) { + status =efi_call_proto (boot_protocol, + get_boot_hartid, &hartid); + } +return status; +} +efi_status_t check_platform_features (void ) {int ret; +efi_status_t status; - ret =get_boot_hartid_from_fdt (); -if (ret) { -efi_err ("/chosen/boot-hartid missing or invalid!\n" ); -return EFI_UNSUPPORTED ; + status =get_boot_hartid_from_efi (); +if (status !=EFI_SUCCESS ) { + ret =get_boot_hartid_from_fdt (); +if (ret) { +efi_err ("Failed to get boot hartid!\n" ); +return EFI_UNSUPPORTED ; + } }return EFI_SUCCESS ; }include/linux/efi.h +1
-0@@ -380,6 +380,7 @@ void efi_native_runtime_setup(void);#define EFI_CONSOLE_OUT_DEVICE_GUID EFI_GUID(0xd3b36f2c, 0xd551, 0x11d4, 0x9a, 0x46, 0x00, 0x90, 0x27, 0x3f, 0xc1, 0x4d)#define APPLE_PROPERTIES_PROTOCOL_GUID EFI_GUID(0x91bd12fe, 0xf6c3, 0x44fb, 0xa5, 0xb7, 0x51, 0x22, 0xab, 0x30, 0x3a, 0xe0)#define EFI_TCG2_PROTOCOL_GUID EFI_GUID(0x607f766c, 0x7455, 0x42be, 0x93, 0x0b, 0xe4, 0xd7, 0x6d, 0xb2, 0x72, 0x0f) +#define RISCV_EFI_BOOT_PROTOCOL_GUID EFI_GUID(0xccd15fec, 0x6f73, 0x4eec, 0x83, 0x95, 0x3e, 0x69, 0xe4, 0xb9, 0x40, 0xbf)#define EFI_LOAD_FILE_PROTOCOL_GUID EFI_GUID(0x56ec3091, 0x954c, 0x11d2, 0x8e, 0x3f, 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b)#define EFI_LOAD_FILE2_PROTOCOL_GUID EFI_GUID(0x4006c0c1, 0xfcb3, 0x403e, 0x99, 0x6d, 0x4a, 0x6c, 0x87, 0x24, 0xe0, 0x6d)#define EFI_RT_PROPERTIES_TABLE_GUID EFI_GUID(0xeb66918a, 0x7eef, 0x402a, 0x84, 0x2e, 0x93, 0x1d, 0x21, 0xc3, 0x8a, 0xe9)
Re: [PATCH 1/1] riscv/efi_stub: Add support for RISCV_EFI_BOOT_PROTOCOL
Quoted 12 lines · Heinrich Schuchardt
Quoted 10 lines · Sunil V L
This patch adds the support for getting the boot hart ID in Linux EFI stub using
RISCV_EFI_BOOT_PROTOCOL. This protocol is preferred method over existing DT based solution since it works irrespective of DT or ACPI.The specification of the protocol is hosted at:
https://github.com/riscv-non-isa/riscv-uefiSigned-off-by Sunil V L <[email protected]>Acked-by Palmer Dabbelt <[email protected]>
Quoted 7 lines
This seems to be v3 of the patch. v2 is available in
https://lore.kernel.org/all/[email protected]/v3 replaces a message in
efi_status_tcheck_platform_features():<+
efi_err("/chosen/boot-hartid missing or invalid!\n");Quoted 1 line
+
efi_err("Failed to get boot hartid!\n");
Yes, that's correct. Sorry I missed the version. I resent the patch with version and your RB tag added.
Thanks!
Sunil
Quoted 84 lines
Reviewed-by Heinrich Schuchardt <[email protected]>Quoted 80 lines
--- drivers/firmware/efi/libstub/efistub.h | 7 ++++++ drivers/firmware/efi/libstub/riscv-stub.c | 29 +++++++++++++++++++---- include/linux/efi.h | 1 + 3 files changed, 32 insertions(+), 5 deletions(-)drivers/firmware/efi/libstub/efistub.h +7
-0@@ -720,6 +720,13 @@ union efi_tcg2_protocol { } mixed_mode; }; +struct riscv_efi_boot_protocol { +u64 revision; + + efi_status_t (__efiapi * get_boot_hartid)(struct riscv_efi_boot_protocol *this, + size_t *boot_hartid); +}; +typedef union efi_load_file_protocol efi_load_file_protocol_t ;typedef union efi_load_file_protocol efi_load_file2_protocol_t ;drivers/firmware/efi/libstub/riscv-stub.c +24
-5@@ -23,7 +23,7 @@typedef void __noreturn (*jump_kernel_func )(unsigned int ,unsigned long ); -static u32 hartid; +static size_t hartid;static int get_boot_hartid_from_fdt (void ) {@@ -47,14 +47,33 @@ static int get_boot_hartid_from_fdt(void)return 0 ; } +static efi_status_t get_boot_hartid_from_efi (void ) +{ +efi_guid_t boot_protocol_guid =RISCV_EFI_BOOT_PROTOCOL_GUID ; +efi_status_t status; +struct riscv_efi_boot_protocol *boot_protocol; + + status =efi_bs_call (locate_protocol, &boot_protocol_guid,NULL , + (void **)&boot_protocol); +if (status ==EFI_SUCCESS ) { + status =efi_call_proto (boot_protocol, + get_boot_hartid, &hartid); + } +return status; +} +efi_status_t check_platform_features (void ) {int ret; +efi_status_t status; - ret =get_boot_hartid_from_fdt (); -if (ret) { -efi_err ("/chosen/boot-hartid missing or invalid!\n" ); -return EFI_UNSUPPORTED ; + status =get_boot_hartid_from_efi (); +if (status !=EFI_SUCCESS ) { + ret =get_boot_hartid_from_fdt (); +if (ret) { +efi_err ("Failed to get boot hartid!\n" ); +return EFI_UNSUPPORTED ; + } }return EFI_SUCCESS ; }include/linux/efi.h +1
-0@@ -380,6 +380,7 @@ void efi_native_runtime_setup(void);#define EFI_CONSOLE_OUT_DEVICE_GUID EFI_GUID(0xd3b36f2c, 0xd551, 0x11d4, 0x9a, 0x46, 0x00, 0x90, 0x27, 0x3f, 0xc1, 0x4d)#define APPLE_PROPERTIES_PROTOCOL_GUID EFI_GUID(0x91bd12fe, 0xf6c3, 0x44fb, 0xa5, 0xb7, 0x51, 0x22, 0xab, 0x30, 0x3a, 0xe0)#define EFI_TCG2_PROTOCOL_GUID EFI_GUID(0x607f766c, 0x7455, 0x42be, 0x93, 0x0b, 0xe4, 0xd7, 0x6d, 0xb2, 0x72, 0x0f) +#define RISCV_EFI_BOOT_PROTOCOL_GUID EFI_GUID(0xccd15fec, 0x6f73, 0x4eec, 0x83, 0x95, 0x3e, 0x69, 0xe4, 0xb9, 0x40, 0xbf)#define EFI_LOAD_FILE_PROTOCOL_GUID EFI_GUID(0x56ec3091, 0x954c, 0x11d2, 0x8e, 0x3f, 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b)#define EFI_LOAD_FILE2_PROTOCOL_GUID EFI_GUID(0x4006c0c1, 0xfcb3, 0x403e, 0x99, 0x6d, 0x4a, 0x6c, 0x87, 0x24, 0xe0, 0x6d)#define EFI_RT_PROPERTIES_TABLE_GUID EFI_GUID(0xeb66918a, 0x7eef, 0x402a, 0x84, 0x2e, 0x93, 0x1d, 0x21, 0xc3, 0x8a, 0xe9)