Skip to contentSkip to conversation

Pull in WILC Wi-Fi updates

PATCH Superseded Kris Bahnsen via buildroot 1 participant 5 messages Mar 24, 2022 Arm/Microchip (AT91) SoC support

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore

Kris Bahnsen via buildroot

author
#0 lore raw

cover Pull in WILC Wi-Fi updates

This series bumps WILC1000/3000 firmware to the latest available from Microchip, updates existing defconfig files to include both WILC1000 and WILC3000 blobs, and adds a package to build the wilc driver as an external kernel module.

The previous wilc1000-firmware package was extremely outdated, no longer available on github, and installed the firmware files to the wrong location for the current upstream kernel wilc1000 driver and Microchip's separately maintained driver.

Since the firmware change includes individual WILC1000 and WILC3000 config options, this package is renamed to wilc-firmware.

The defconfigs of all platforms that used WILC1000 firmware were touched to also include WILC3000 firmware. They either natively have WILC3000 or can support either WILC1000/WILC3000 being connected to these platforms.

I've attempted to test the firmware changes against microchip_sama5d27_wlsom1_ek_mmc_dev_defconfig as this is a board I have in my possession. However, the defconfig appears broken (Microchip now maintains the evk in their own BR2_EXTERNAL repo):

...
Kernel command line: console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw
...
RAMDISK: Couldn't find valid RAM disk image starting at 0.
mmc0: new ultra high speed DDR50 SDHC card at address aaaa
List of all partitions:
...

Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0)
CPU: 0 PID: 1 Comm: swapper Not tainted 5.10.80-linux4microchip-2021.10 #1
Hardware name: Atmel SAMA5

Function entered at [<c010c0fc>] from [<c010974c>] Function entered at [<c010974c>] from [<c087e37c>] Function entered at [<c087e37c>] from [<c0b014bc>] Function entered at [<c0b014bc>] from [<c0b01788>] Function entered at [<c0b01788>] from [<c08872c0>] Function entered at [<c08872c0>] from [<c0100148>]

Exception stack(0xc2c29fb0 to 0xc2c29ff8)
9fa0:                                     00000000 00000000 00000000 00000000
9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9fe0: 00000000 00000000 00000000 00000000 00000013 00000000
---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0) ]---

The firmware and driver changes have been thoroughly tested, however, on an embeddedTS platform (BR patch for this in the future, waiting on kernel accepting FDT) that includes the WILC3000 device. We have a number of platforms that all use this same device and are starting to push for better upstream support overall. So this patch series is us laying the groundwork for that.

Kris Bahnsen (4):
package/wilc1000-firmware: bump to 15.6 package/wilc-firmware: rename from wilc1000-firmware
configs: add WILC3000_FIRMWARE to compatible devices package/wilc-driver: new package

 DEVELOPERS                                         |  6 ++-
 configs/at91sam9x5ek_dev_defconfig                 |  1 +
 configs/at91sam9x5ek_mmc_dev_defconfig             |  1 +
 configs/atmel_sama5d27_som1_ek_mmc_dev_defconfig   |  1 +
 configs/atmel_sama5d2_xplained_mmc_dev_defconfig   |  1 +
 configs/atmel_sama5d3_xplained_dev_defconfig       |  1 +
 configs/atmel_sama5d3_xplained_mmc_dev_defconfig   |  1 +
 configs/atmel_sama5d4_xplained_dev_defconfig       |  1 +
 configs/atmel_sama5d4_xplained_mmc_dev_defconfig   |  1 +
 configs/microchip_sam9x60ek_mmc_dev_defconfig      |  1 +
 .../microchip_sama5d27_wlsom1_ek_mmc_dev_defconfig |  1 +
 configs/microchip_sama5d2_icp_mmc_dev_defconfig    |  1 +
 configs/microchip_sama7g5ek_mmc_dev_defconfig      |  1 +
 package/Config.in                                  |  3 +-
 package/wilc-driver/Config.in                      | 58 ++++++++++++++++++++++
 package/wilc-driver/wilc-driver.hash               |  2 +
 package/wilc-driver/wilc-driver.mk                 | 29 +++++++++++
 package/wilc-firmware/Config.in                    | 29 +++++++++++
 package/wilc-firmware/wilc-firmware.hash           |  2 +
 package/wilc-firmware/wilc-firmware.mk             | 34 +++++++++++++
 package/wilc1000-firmware/Config.in                |  6 ---
 package/wilc1000-firmware/wilc1000-firmware.hash   |  2 -
 package/wilc1000-firmware/wilc1000-firmware.mk     | 24 ---------
 23 files changed, 173 insertions(+), 34 deletions(-)
 create mode 100644 package/wilc-driver/Config.in
 create mode 100644 package/wilc-driver/wilc-driver.hash
 create mode 100644 package/wilc-driver/wilc-driver.mk
 create mode 100644 package/wilc-firmware/Config.in
 create mode 100644 package/wilc-firmware/wilc-firmware.hash
 create mode 100644 package/wilc-firmware/wilc-firmware.mk
 delete mode 100644 package/wilc1000-firmware/Config.in
 delete mode 100644 package/wilc1000-firmware/wilc1000-firmware.hash
 delete mode 100644 package/wilc1000-firmware/wilc1000-firmware.mk
Signature · 6 lines
2.11.0

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
author
#1 lore raw

PATCH 1/4 package/wilc1000-firmware: bump to 15.6

Supports both WILC1000 (Wi-Fi only) and WILC3000 (Wi-Fi/BLE) hardware

To support WILC3000 this commit adds a separate config option, the original config option from this package is still valid.

Signed-off-by Kris Bahnsen <[email protected]>
---
 package/wilc1000-firmware/Config.in              | 27 +++++++++++++++++++++--
 package/wilc1000-firmware/wilc1000-firmware.hash |  2 +-
 package/wilc1000-firmware/wilc1000-firmware.mk   | 28 ++++++++++++++++--------
 3 files changed, 45 insertions(+), 12 deletions(-)
package/wilc1000-firmware/Config.in +25 -2
index df8a7a6b60..0734c7ad99 100644
@@ -1,6 +1,29 @@
 config BR2_PACKAGE_WILC1000_FIRMWARE
 	bool "wilc1000-firmware"
 	help
-	  Firmware for Atmel Wilc1000 wireless device
+	  Firmware for Microchip WILC1000 wireless device
 
-	  https://github.com/linux4sc/wireless-firmware.git
+	  These binary blobs are provided directly from Microchip.
+	  Ideally, the firmware version should match driver version.
+	  Generally, the latest firmware would be acceptible regardless
+	  of driver version.
+
+	  These will be installed to /lib/firmware/mchp/
+
+	  https://github.com/linux4wilc/firmware
+
+if BR2_PACKAGE_WILC1000_FIRMWARE
+config BR2_PACKAGE_WILC3000_FIRMWARE
+	bool "wilc3000-firmware"
+	help
+	  Firmware for Microchip WILC3000 wireless device
+
+	  These binary blobs are provided directly from Microchip.
+	  Ideally, the firmware version should match driver version.
+	  Generally, the latest firmware would be acceptible regardless
+	  of driver version.
+
+	  These will be installed to /lib/firmware/mchp/
+
+	  https://github.com/linux4wilc/firmware
+endif
package/wilc1000-firmware/wilc1000-firmware.hash +1 -1
index 5344efe517..9d55be9edc 100644
@@ -1,2 +1,2 @@
 # Locally calculated
-sha256 a2e7a327dd545ba2051946f7613005cbde88fdd952afb8eecdd1dacda7e767d2  v14.1_Firmware.zip
+sha256  29bb5739136cdb4088cb52af59badce05cc7e562bca40e9f29fef7f8f7c19cb8  wilc1000-firmware-wilc_linux_15_6.tar.gz
package/wilc1000-firmware/wilc1000-firmware.mk +19 -9
index 6f504d67a0..2bea9febe2 100644
@@ -4,21 +4,31 @@
 #
 ################################################################################
 
-WILC1000_FIRMWARE_VERSION = 14.1
-WILC1000_FIRMWARE_SITE = https://github.com/linux4sc/wireless-firmware/archive
-WILC1000_FIRMWARE_SOURCE = v$(WILC1000_FIRMWARE_VERSION)_Firmware.zip
+WILC1000_FIRMWARE_VERSION = wilc_linux_15_6
+WILC1000_FIRMWARE_SITE = $(call github,linux4wilc,firmware,$(WILC1000_FIRMWARE_VERSION))
 
 WILC1000_FIRMWARE_LICENSE = PROPRIETARY
 
-define WILC1000_FIRMWARE_EXTRACT_CMDS
-	$(UNZIP) -d $(BUILD_DIR) $(WILC1000_FIRMWARE_DL_DIR)/$(WILC1000_FIRMWARE_SOURCE)
-	mv $(BUILD_DIR)/wireless-firmware-$(WILC1000_FIRMWARE_VERSION)_Firmware/* $(@D)
-	rmdir $(BUILD_DIR)/wireless-firmware-$(WILC1000_FIRMWARE_VERSION)_Firmware
+ifeq ($(BR2_PACKAGE_WILC1000_FIRMWARE),y)
+WILC1000_FIRMWARE_FILES += \
+	wilc1000_wifi_firmware.bin
+endif
+
+ifeq ($(BR2_PACKAGE_WILC3000_FIRMWARE),y)
+WILC1000_FIRMWARE_FILES += \
+	wilc3000_ble_firmware.bin \
+	wilc3000_wifi_firmware.bin
+endif
+
+define WILC1000_FIRMWARE_INSTALL_FILES
+	cd $(@D) && \
+		$(TAR) cf install.tar $(sort $(WILC1000_FIRMWARE_FILES)) && \
+		$(TAR) xf install.tar -C $(TARGET_DIR)/lib/firmware/mchp
 endef
 
 define WILC1000_FIRMWARE_INSTALL_TARGET_CMDS
-	$(INSTALL) -D -m 0644 $(@D)/wilc1003_firmware.bin \
-		$(TARGET_DIR)/lib/firmware/atmel/wilc1003_firmware.bin
+	$(INSTALL) -d -m 0755 $(TARGET_DIR)/lib/firmware/mchp/
+	$(WILC1000_FIRMWARE_INSTALL_FILES)
 endef
 
 $(eval $(generic-package))
Signature · 6 lines
2.11.0

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
author
#2 lore raw

PATCH 2/4 package/wilc-firmware: rename from wilc1000-firmware

In reply to Kris Bahnsen via buildroot

Separates out WILC1000 and WILC3000 in to individual config options since in reality only one or the other set would be needed.

Signed-off-by Kris Bahnsen <[email protected]>
---
 DEVELOPERS                                                 |  5 ++++-
 package/Config.in                                          |  2 +-
 package/{wilc1000-firmware => wilc-firmware}/Config.in     |  4 ++--
 .../wilc-firmware.hash}                                    |  2 +-
 .../wilc-firmware.mk}                                      | 14 +++++++-------
 5 files changed, 15 insertions(+), 12 deletions(-)
 rename package/{wilc1000-firmware => wilc-firmware}/Config.in (92%)
 rename package/{wilc1000-firmware/wilc1000-firmware.hash => wilc-firmware/wilc-firmware.hash} (62%)
 rename package/{wilc1000-firmware/wilc1000-firmware.mk => wilc-firmware/wilc-firmware.mk} (67%)
DEVELOPERS +4 -1
index 942bb8fe9c..17becfa189 100644
@@ -1660,6 +1660,9 @@ F:	board/octavo/osd32mp1-red/
 F:	configs/octavo_osd32mp1_brk_defconfig
 F:	configs/octavo_osd32mp1_red_defconfig
 
+N:	Kris Bahnsen <[email protected]>
+F:	package/wilc-firmware/
+
 N:	Kurt Van Dijck <[email protected]>
 F:	package/bcusdk/
 F:	package/libpthsem/

@@ -1757,7 +1760,7 @@ F:	package/python-json-schema-validator/
 F:	package/python-keyring/
 F:	package/python-simplejson/
 F:	package/python-versiontools/
-F:	package/wilc1000-firmware/
+F:	package/wilc-firmware/
 
 N:	Maeva Manuel <[email protected]>
 F:	board/freescale/imx8qmmek/
package/Config.in +1 -1
index 0d5d763180..a175f105f3 100644
@@ -432,7 +432,7 @@ menu "Firmware"
 	source "package/sunxi-boards/Config.in"
 	source "package/ts4900-fpga/Config.in"
 	source "package/ux500-firmware/Config.in"
-	source "package/wilc1000-firmware/Config.in"
+	source "package/wilc-firmware/Config.in"
 	source "package/wilink-bt-firmware/Config.in"
 	source "package/zd1211-firmware/Config.in"
 endmenu
package/wilc-firmware/Config.in renamed from package/wilc1000-firmware/Config.in +2 -2
similarity index 92%
rename from package/wilc1000-firmware/Config.in
rename to package/wilc-firmware/Config.in
index 0734c7ad99..23abc88712 100644
@@ -1,5 +1,6 @@
 config BR2_PACKAGE_WILC1000_FIRMWARE
 	bool "wilc1000-firmware"
+	select BR2_PACKAGE_WILC_FIRMWARE
 	help
 	  Firmware for Microchip WILC1000 wireless device
 

@@ -12,9 +13,9 @@ config BR2_PACKAGE_WILC1000_FIRMWARE
 
 	  https://github.com/linux4wilc/firmware
 
-if BR2_PACKAGE_WILC1000_FIRMWARE
 config BR2_PACKAGE_WILC3000_FIRMWARE
 	bool "wilc3000-firmware"
+	select BR2_PACKAGE_WILC_FIRMWARE
 	help
 	  Firmware for Microchip WILC3000 wireless device
 

@@ -26,4 +27,3 @@ config BR2_PACKAGE_WILC3000_FIRMWARE
 	  These will be installed to /lib/firmware/mchp/
 
 	  https://github.com/linux4wilc/firmware
-endif
package/wilc-firmware/wilc-firmware.hash renamed from package/wilc1000-firmware/wilc1000-firmware.hash +1 -1
similarity index 62%
rename from package/wilc1000-firmware/wilc1000-firmware.hash
rename to package/wilc-firmware/wilc-firmware.hash
index 9d55be9edc..2f1fc9964d 100644
@@ -1,2 +1,2 @@
 # Locally calculated
-sha256  29bb5739136cdb4088cb52af59badce05cc7e562bca40e9f29fef7f8f7c19cb8  wilc1000-firmware-wilc_linux_15_6.tar.gz
+sha256  29bb5739136cdb4088cb52af59badce05cc7e562bca40e9f29fef7f8f7c19cb8  wilc-firmware-wilc_linux_15_6.tar.gz
package/wilc-firmware/wilc-firmware.mk renamed from package/wilc1000-firmware/wilc1000-firmware.mk +7 -7
similarity index 67%
rename from package/wilc1000-firmware/wilc1000-firmware.mk
rename to package/wilc-firmware/wilc-firmware.mk
index 2bea9febe2..63fd100421 100644
@@ -1,13 +1,13 @@
 ################################################################################
 #
-# wilc1000-firmware
+# wilc-firmware
 #
 ################################################################################
 
-WILC1000_FIRMWARE_VERSION = wilc_linux_15_6
-WILC1000_FIRMWARE_SITE = $(call github,linux4wilc,firmware,$(WILC1000_FIRMWARE_VERSION))
+WILC_FIRMWARE_VERSION = wilc_linux_15_6
+WILC_FIRMWARE_SITE = $(call github,linux4wilc,firmware,$(WILC_FIRMWARE_VERSION))
 
-WILC1000_FIRMWARE_LICENSE = PROPRIETARY
+WILC_FIRMWARE_LICENSE = PROPRIETARY
 
 ifeq ($(BR2_PACKAGE_WILC1000_FIRMWARE),y)
 WILC1000_FIRMWARE_FILES += \

@@ -20,15 +20,15 @@ WILC1000_FIRMWARE_FILES += \
 	wilc3000_wifi_firmware.bin
 endif
 
-define WILC1000_FIRMWARE_INSTALL_FILES
+define WILC_FIRMWARE_INSTALL_FILES
 	cd $(@D) && \
 		$(TAR) cf install.tar $(sort $(WILC1000_FIRMWARE_FILES)) && \
 		$(TAR) xf install.tar -C $(TARGET_DIR)/lib/firmware/mchp
 endef
 
-define WILC1000_FIRMWARE_INSTALL_TARGET_CMDS
+define WILC_FIRMWARE_INSTALL_TARGET_CMDS
 	$(INSTALL) -d -m 0755 $(TARGET_DIR)/lib/firmware/mchp/
-	$(WILC1000_FIRMWARE_INSTALL_FILES)
+	$(WILC_FIRMWARE_INSTALL_FILES)
 endef
 
 $(eval $(generic-package))
Signature · 6 lines
2.11.0

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
author
#3 lore raw

PATCH 3/4 configs: add WILC3000_FIRMWARE to compatible devices

In reply to Kris Bahnsen via buildroot

The update to wilc-firmware added firmware files for WILC3000 devices as a separate config option. All Atmel/Microchip defconfigs that previously only had WILC1000_FIRMWARE either have WILC3000 Wi-Fi hardware (WILC3000 is the same silicon but with BLE added) or have the capacity to have either WILC1000 or WILC3000 devices added to the system. Install all firmware blobs to these devices by default.

Signed-off-by Kris Bahnsen <[email protected]>
---
 configs/at91sam9x5ek_dev_defconfig                     | 1 +
 configs/at91sam9x5ek_mmc_dev_defconfig                 | 1 +
 configs/atmel_sama5d27_som1_ek_mmc_dev_defconfig       | 1 +
 configs/atmel_sama5d2_xplained_mmc_dev_defconfig       | 1 +
 configs/atmel_sama5d3_xplained_dev_defconfig           | 1 +
 configs/atmel_sama5d3_xplained_mmc_dev_defconfig       | 1 +
 configs/atmel_sama5d4_xplained_dev_defconfig           | 1 +
 configs/atmel_sama5d4_xplained_mmc_dev_defconfig       | 1 +
 configs/microchip_sam9x60ek_mmc_dev_defconfig          | 1 +
 configs/microchip_sama5d27_wlsom1_ek_mmc_dev_defconfig | 1 +
 configs/microchip_sama5d2_icp_mmc_dev_defconfig        | 1 +
 configs/microchip_sama7g5ek_mmc_dev_defconfig          | 1 +
 12 files changed, 12 insertions(+)
configs/at91sam9x5ek_dev_defconfig +1 -0
index bfa8e95941..8714463d89 100644
@@ -47,6 +47,7 @@ BR2_PACKAGE_DOSFSTOOLS_MKFS_FAT=y
 BR2_PACKAGE_MMC_UTILS=y
 BR2_PACKAGE_MTD=y
 BR2_PACKAGE_WILC1000_FIRMWARE=y
+BR2_PACKAGE_WILC3000_FIRMWARE=y
 BR2_PACKAGE_EVTEST=y
 BR2_PACKAGE_I2C_TOOLS=y
 BR2_PACKAGE_SETSERIAL=y
configs/at91sam9x5ek_mmc_dev_defconfig +1 -0
index 2e1a5c7f59..9481594716 100644
@@ -50,6 +50,7 @@ BR2_PACKAGE_DOSFSTOOLS_MKFS_FAT=y
 BR2_PACKAGE_MMC_UTILS=y
 BR2_PACKAGE_MTD=y
 BR2_PACKAGE_WILC1000_FIRMWARE=y
+BR2_PACKAGE_WILC3000_FIRMWARE=y
 BR2_PACKAGE_EVTEST=y
 BR2_PACKAGE_I2C_TOOLS=y
 BR2_PACKAGE_SETSERIAL=y
configs/atmel_sama5d27_som1_ek_mmc_dev_defconfig +1 -0
index ba2fa46790..38618a5732 100644
@@ -39,6 +39,7 @@ BR2_PACKAGE_DOSFSTOOLS_MKFS_FAT=y
 BR2_PACKAGE_MMC_UTILS=y
 BR2_PACKAGE_MTD=y
 BR2_PACKAGE_WILC1000_FIRMWARE=y
+BR2_PACKAGE_WILC3000_FIRMWARE=y
 BR2_PACKAGE_EVTEST=y
 BR2_PACKAGE_I2C_TOOLS=y
 BR2_PACKAGE_RNG_TOOLS=y
configs/atmel_sama5d2_xplained_mmc_dev_defconfig +1 -0
index a8b68ca0a2..1654408aa5 100644
@@ -53,6 +53,7 @@ BR2_PACKAGE_DOSFSTOOLS_MKFS_FAT=y
 BR2_PACKAGE_MMC_UTILS=y
 BR2_PACKAGE_MTD=y
 BR2_PACKAGE_WILC1000_FIRMWARE=y
+BR2_PACKAGE_WILC3000_FIRMWARE=y
 BR2_PACKAGE_EVTEST=y
 BR2_PACKAGE_I2C_TOOLS=y
 BR2_PACKAGE_SETSERIAL=y
configs/atmel_sama5d3_xplained_dev_defconfig +1 -0
index cdfd9de17e..64455cb2e0 100644
@@ -49,6 +49,7 @@ BR2_PACKAGE_DOSFSTOOLS_MKFS_FAT=y
 BR2_PACKAGE_MMC_UTILS=y
 BR2_PACKAGE_MTD=y
 BR2_PACKAGE_WILC1000_FIRMWARE=y
+BR2_PACKAGE_WILC3000_FIRMWARE=y
 BR2_PACKAGE_EVTEST=y
 BR2_PACKAGE_I2C_TOOLS=y
 BR2_PACKAGE_SETSERIAL=y
configs/atmel_sama5d3_xplained_mmc_dev_defconfig +1 -0
index a2205aeefa..8f5724d631 100644
@@ -52,6 +52,7 @@ BR2_PACKAGE_DOSFSTOOLS_MKFS_FAT=y
 BR2_PACKAGE_MMC_UTILS=y
 BR2_PACKAGE_MTD=y
 BR2_PACKAGE_WILC1000_FIRMWARE=y
+BR2_PACKAGE_WILC3000_FIRMWARE=y
 BR2_PACKAGE_EVTEST=y
 BR2_PACKAGE_I2C_TOOLS=y
 BR2_PACKAGE_SETSERIAL=y
configs/atmel_sama5d4_xplained_dev_defconfig +1 -0
index f8783f5652..fab91cf0b3 100644
@@ -50,6 +50,7 @@ BR2_PACKAGE_DOSFSTOOLS_MKFS_FAT=y
 BR2_PACKAGE_MMC_UTILS=y
 BR2_PACKAGE_MTD=y
 BR2_PACKAGE_WILC1000_FIRMWARE=y
+BR2_PACKAGE_WILC3000_FIRMWARE=y
 BR2_PACKAGE_EVTEST=y
 BR2_PACKAGE_I2C_TOOLS=y
 BR2_PACKAGE_SETSERIAL=y
configs/atmel_sama5d4_xplained_mmc_dev_defconfig +1 -0
index b4e99f658a..f9074e9862 100644
@@ -53,6 +53,7 @@ BR2_PACKAGE_DOSFSTOOLS_MKFS_FAT=y
 BR2_PACKAGE_MMC_UTILS=y
 BR2_PACKAGE_MTD=y
 BR2_PACKAGE_WILC1000_FIRMWARE=y
+BR2_PACKAGE_WILC3000_FIRMWARE=y
 BR2_PACKAGE_EVTEST=y
 BR2_PACKAGE_I2C_TOOLS=y
 BR2_PACKAGE_SETSERIAL=y
configs/microchip_sam9x60ek_mmc_dev_defconfig +1 -0
index 06e03967c4..2b4e234297 100644
@@ -36,6 +36,7 @@ BR2_PACKAGE_DOSFSTOOLS_MKFS_FAT=y
 BR2_PACKAGE_MMC_UTILS=y
 BR2_PACKAGE_MTD=y
 BR2_PACKAGE_WILC1000_FIRMWARE=y
+BR2_PACKAGE_WILC3000_FIRMWARE=y
 BR2_PACKAGE_EVTEST=y
 BR2_PACKAGE_I2C_TOOLS=y
 BR2_PACKAGE_SETSERIAL=y
configs/microchip_sama5d27_wlsom1_ek_mmc_dev_defconfig +1 -0
index 3bcd5f0200..f9aa6cdc05 100644
@@ -39,6 +39,7 @@ BR2_PACKAGE_DOSFSTOOLS_MKFS_FAT=y
 BR2_PACKAGE_MMC_UTILS=y
 BR2_PACKAGE_MTD=y
 BR2_PACKAGE_WILC1000_FIRMWARE=y
+BR2_PACKAGE_WILC3000_FIRMWARE=y
 BR2_PACKAGE_EVTEST=y
 BR2_PACKAGE_I2C_TOOLS=y
 BR2_PACKAGE_SETSERIAL=y
configs/microchip_sama5d2_icp_mmc_dev_defconfig +1 -0
index 27d1d3409d..b1b22c1312 100644
@@ -32,6 +32,7 @@ BR2_PACKAGE_DOSFSTOOLS_MKFS_FAT=y
 BR2_PACKAGE_MMC_UTILS=y
 BR2_PACKAGE_MTD=y
 BR2_PACKAGE_WILC1000_FIRMWARE=y
+BR2_PACKAGE_WILC3000_FIRMWARE=y
 BR2_PACKAGE_EVTEST=y
 BR2_PACKAGE_SETSERIAL=y
 BR2_PACKAGE_SPI_TOOLS=y
configs/microchip_sama7g5ek_mmc_dev_defconfig +1 -0
index 6eb6c282e0..d68846e553 100644
@@ -30,6 +30,7 @@ BR2_PACKAGE_DOSFSTOOLS_MKFS_FAT=y
 BR2_PACKAGE_MMC_UTILS=y
 BR2_PACKAGE_MTD=y
 BR2_PACKAGE_WILC1000_FIRMWARE=y
+BR2_PACKAGE_WILC3000_FIRMWARE=y
 BR2_PACKAGE_EVTEST=y
 BR2_PACKAGE_RNG_TOOLS=y
 # BR2_PACKAGE_RNG_TOOLS_JITTERENTROPY_LIBRARY is not set
Signature · 6 lines
2.11.0

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
author
#4 lore raw

PATCH 4/4 package/wilc-driver: new package

In reply to Kris Bahnsen via buildroot

WILC1000/3000 driver pulled from at91-linux tree set-up to be built as an external module. Upstream Linux kernel does not support WILC3000 features at this time. This package is intended to bridge that gap until WILC1000/3000 is fully supported in kernel.

Signed-off-by Kris Bahnsen <[email protected]>
---
 DEVELOPERS                           |  1 +
 package/Config.in                    |  1 +
 package/wilc-driver/Config.in        | 58 ++++++++++++++++++++++++++++++++++++
 package/wilc-driver/wilc-driver.hash |  2 ++
 package/wilc-driver/wilc-driver.mk   | 29 ++++++++++++++++++
 5 files changed, 91 insertions(+)
 create mode 100644 package/wilc-driver/Config.in
 create mode 100644 package/wilc-driver/wilc-driver.hash
 create mode 100644 package/wilc-driver/wilc-driver.mk
DEVELOPERS +1 -0
index 17becfa189..acd341873d 100644
@@ -1662,6 +1662,7 @@ F:	configs/octavo_osd32mp1_red_defconfig
 
 N:	Kris Bahnsen <[email protected]>
 F:	package/wilc-firmware/
+F:	package/wilc-driver/
 
 N:	Kurt Van Dijck <[email protected]>
 F:	package/bcusdk/
package/Config.in +1 -0
index a175f105f3..ae3f13df5c 100644
@@ -610,6 +610,7 @@ endmenu
 	source "package/usbutils/Config.in"
 	source "package/w_scan/Config.in"
 	source "package/wf111/Config.in"
+	source "package/wilc-driver/Config.in"
 	source "package/wipe/Config.in"
 	source "package/xorriso/Config.in"
 	source "package/xr819-xradio/Config.in"
package/wilc-driver/Config.in new file +58 -0

58 lines not on this page · raw message

package/wilc-driver/wilc-driver.hash new file +2 -0
new file mode 100644
index 0000000000..bfd8eaebc4
@@ -0,0 +1,2 @@
+# Locally calculated
+sha256  62a03d1a4f6aa92f5ecae36b5c8798a121506e8b09a8a68192b664416bf6e745  wilc-driver-linux4microchip-2021.10.tar.gz
package/wilc-driver/wilc-driver.mk new file +29 -0
new file mode 100644
index 0000000000..3b1fab8954
@@ -0,0 +1,29 @@
+################################################################################
+#
+# wilc-driver
+#
+################################################################################
+
+WILC_DRIVER_VERSION = linux4microchip-2021.10
+WILC_DRIVER_SITE = $(call github,embeddedTS,wilc3000-external-module,$(WILC_DRIVER_VERSION))
+
+WILC_DRIVER_LICENSE = GPL-2.0
+WILC_DRIVER_LICENSE_FILES = LICENSE
+
+ifeq ($(BR2_PACKAGE_WILC_DRIVER_SPI),y)
+WILC_DRIVER_MODULE_MAKE_OPTS += \
+	CONFIG_WILC_SPI=m
+endif
+
+ifeq ($(BR2_PACKAGE_WILC_DRIVER_SDIO),y)
+WILC_DRIVER_MODULE_MAKE_OPTS += \
+	CONFIG_WILC_SDIO=m
+endif
+
+ifeq ($(BR2_PACKAGE_WILC_DRIVER_SDIO_OOB),y)
+WILC_DRIVER_MODULE_MAKE_OPTS += \
+	CONFIG_WILC_HW_OOB_INTR=y
+endif
+
+$(eval $(kernel-module))
+$(eval $(generic-package))
Signature · 6 lines
2.11.0

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot