Skip to contentSkip to conversation

Add a clock driver for the imx8mq

PATCH New Angus Ainslie 2 participants 7 messages Mar 29, 2022 – Apr 12, 2022

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

v7 cover Add a clock driver for the imx8mq

This is a DM clock driver for the imx8mq based on the linux kernel driver and the u-boot imx8mm clock driver.

It also removes some code duplication in the imx8m[nmp] clock drivers.

Changes since v6

Fixed unused variable warning

Changes since v5

Added UART clocks
Added video clocks
Added DRAM clocks

Changes since v4

Rebased onto [1] so patch 4 of 4 was dropped.
Added CLK_COMPOSITE_CCF
Fixed const* clock definitions

Changes since v3:

Fixed driver spelling
Moved rate macros out of the header into the dot c

Changes since v2:

Added kernel commit IDs
Re-factored rate table code to remove duplication Remove duplicate code by creating a common clk-imx8m

Changes since v1:

More verbose clock driver description
Added forgotten dt-bindings
Synced PLL frequencies with mainline kernel

[1] https://patchwork.ozlabs.org/project/uboot/patch/[email protected]/

Angus Ainslie (3):
dt-bindings: imx8mq-clock: add mainline definitions
clk: imx8mq: Add a clock driver for the imx8mq
clk: imx8m: reduce rate table duplication

 drivers/clk/imx/Kconfig                  |  18 +
 drivers/clk/imx/Makefile                 |   2 +
 drivers/clk/imx/clk-imx8mm.c             |  60 +--
 drivers/clk/imx/clk-imx8mn.c             |  60 +--
 drivers/clk/imx/clk-imx8mp.c             |  65 +--
 drivers/clk/imx/clk-imx8mq.c             | 503 +++++++++++++++++++++++
 drivers/clk/imx/clk-pll14xx.c            |  61 +++
 drivers/clk/imx/clk.h                    |   4 +
 include/dt-bindings/clock/imx8mq-clock.h |  16 +-
 9 files changed, 623 insertions(+), 166 deletions(-)
 create mode 100644 drivers/clk/imx/clk-imx8mq.c
Signature · 1 line
2.25.1
#1 lore raw

PATCH v7 1/3 dt-bindings: imx8mq-clock: add mainline definitions

Sync the clock ids with the mainline kernel

077de6e1c9f ("clk: imx8mq: add PLL monitor output")

---
 include/dt-bindings/clock/imx8mq-clock.h | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)
include/dt-bindings/clock/imx8mq-clock.h +15 -1
index 9b8045d75b8..82e907ce7bd 100644
@@ -431,6 +431,20 @@
 
 #define IMX8MQ_CLK_A53_CORE			289
 
-#define IMX8MQ_CLK_END				290
+#define IMX8MQ_CLK_MON_AUDIO_PLL1_DIV		290
+#define IMX8MQ_CLK_MON_AUDIO_PLL2_DIV		291
+#define IMX8MQ_CLK_MON_VIDEO_PLL1_DIV		292
+#define IMX8MQ_CLK_MON_GPU_PLL_DIV		293
+#define IMX8MQ_CLK_MON_VPU_PLL_DIV		294
+#define IMX8MQ_CLK_MON_ARM_PLL_DIV		295
+#define IMX8MQ_CLK_MON_SYS_PLL1_DIV		296
+#define IMX8MQ_CLK_MON_SYS_PLL2_DIV		297
+#define IMX8MQ_CLK_MON_SYS_PLL3_DIV		298
+#define IMX8MQ_CLK_MON_DRAM_PLL_DIV		299
+#define IMX8MQ_CLK_MON_VIDEO_PLL2_DIV		300
+#define IMX8MQ_CLK_MON_SEL			301
+#define IMX8MQ_CLK_MON_CLK2_OUT			302
+
+#define IMX8MQ_CLK_END				303
 
 #endif /* __DT_BINDINGS_CLOCK_IMX8MQ_H */
Signature · 1 line
2.25.1
#2 lore raw

PATCH v7 1/3 dt-bindings: imx8mq-clock: add mainline definitions

Quoted 4 lines

Sync the clock ids with the mainline kernel 077de6e1c9f ("clk: imx8mq: add PLL monitor output")

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================
#3 lore raw

PATCH v7 2/3 clk: imx8mq: Add a clock driver for the imx8mq

In reply to Angus Ainslie

This is a DM clock driver based off the imx8mm u-boot driver and the linux kernel driver.

All of the PLLs and clocks are initialized so the subsystems below are functional and tested.

1) USB host and peripheral
2) ECSPI
3) UART
4) I2C all busses
5) USDHC for eMMC support
6) USB storage
7) GPIO
8) DRAM

---
 drivers/clk/imx/Kconfig      |  18 ++
 drivers/clk/imx/Makefile     |   2 +
 drivers/clk/imx/clk-imx8mq.c | 550 +++++++++++++++++++++++++++++++++++
 3 files changed, 570 insertions(+)
 create mode 100644 drivers/clk/imx/clk-imx8mq.c
drivers/clk/imx/Kconfig +18 -0
index cdd348020b0..04d252a1e03 100644
@@ -71,6 +71,24 @@ config CLK_IMX8MP
 	help
 	  This enables support clock driver for i.MX8MP platforms.
 
+config SPL_CLK_IMX8MQ
+	bool "SPL clock support for i.MX8MQ"
+	depends on ARCH_IMX8M && SPL
+	select SPL_CLK
+	select SPL_CLK_CCF
+	select SPL_CLK_COMPOSITE_CCF
+	help
+	  This enables SPL DM/DTS support for clock driver in i.MX8MQ
+
+config CLK_IMX8MQ
+	bool "Clock support for i.MX8MQ"
+	depends on ARCH_IMX8M
+	select CLK
+	select CLK_CCF
+	select CLK_COMPOSITE_CCF
+	help
+	  This enables support clock driver for i.MX8MQ platforms.
+
 config SPL_CLK_IMXRT1020
 	bool "SPL clock support for i.MXRT1020"
 	depends on ARCH_IMXRT && SPL
drivers/clk/imx/Makefile +2 -0
index 01bbbdf3aea..c5766901f2b 100644
@@ -16,6 +16,8 @@ obj-$(CONFIG_$(SPL_TPL_)CLK_IMX8MN) += clk-imx8mn.o clk-pll14xx.o \
 				clk-composite-8m.o
 obj-$(CONFIG_$(SPL_TPL_)CLK_IMX8MP) += clk-imx8mp.o clk-pll14xx.o \
 				clk-composite-8m.o
+obj-$(CONFIG_$(SPL_TPL_)CLK_IMX8MQ) += clk-imx8mq.o clk-pll14xx.o \
+				clk-composite-8m.o
 
 obj-$(CONFIG_$(SPL_TPL_)CLK_IMXRT1020) += clk-imxrt1020.o
 obj-$(CONFIG_$(SPL_TPL_)CLK_IMXRT1050) += clk-imxrt1050.o
drivers/clk/imx/clk-imx8mq.c new file +550 -0

550 lines not on this page · raw message

Signature · 1 line
2.25.1
#4 lore raw

PATCH v7 2/3 clk: imx8mq: Add a clock driver for the imx8mq

Quoted 12 lines

This is a DM clock driver based off the imx8mm u-boot driver and the linux kernel driver.
All of the PLLs and clocks are initialized so the subsystems below are functional and tested.
1) USB host and peripheral
2) ECSPI
3) UART
4) I2C all busses
5) USDHC for eMMC support
6) USB storage
7) GPIO
8) DRAM

Quoted 2 lines

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================
#5 lore raw

PATCH v7 3/3 clk: imx8m: reduce rate table duplication

In reply to Angus Ainslie

Re-factor the imx8m[nmpq] rate tables into the common pll1416x clock driver.

43cdaa1567ad3 ("clk: imx8mm: Move 1443X/1416X PLL clock structure to common place")

---
 drivers/clk/imx/clk-imx8mm.c  | 60 +++-----------------------------
 drivers/clk/imx/clk-imx8mn.c  | 60 +++-----------------------------
 drivers/clk/imx/clk-imx8mp.c  | 65 ++++++-----------------------------
 drivers/clk/imx/clk-imx8mq.c  | 59 ++++---------------------------
 drivers/clk/imx/clk-pll14xx.c | 61 ++++++++++++++++++++++++++++++++
 drivers/clk/imx/clk.h         |  4 +++
 6 files changed, 91 insertions(+), 218 deletions(-)
drivers/clk/imx/clk-imx8mm.c +5 -55
index 443bbdae332..11213212620 100644
@@ -15,56 +15,6 @@
 
 #include "clk.h"
 
-#define PLL_1416X_RATE(_rate, _m, _p, _s)		\
-	{						\
-		.rate	=	(_rate),		\
-		.mdiv	=	(_m),			\
-		.pdiv	=	(_p),			\
-		.sdiv	=	(_s),			\
-	}
-
-#define PLL_1443X_RATE(_rate, _m, _p, _s, _k)		\
-	{						\
-		.rate	=	(_rate),		\
-		.mdiv	=	(_m),			\
-		.pdiv	=	(_p),			\
-		.sdiv	=	(_s),			\
-		.kdiv	=	(_k),			\
-	}
-
-static const struct imx_pll14xx_rate_table imx8mm_pll1416x_tbl[] = {
-	PLL_1416X_RATE(1800000000U, 225, 3, 0),
-	PLL_1416X_RATE(1600000000U, 200, 3, 0),
-	PLL_1416X_RATE(1200000000U, 300, 3, 1),
-	PLL_1416X_RATE(1000000000U, 250, 3, 1),
-	PLL_1416X_RATE(800000000U,  200, 3, 1),
-	PLL_1416X_RATE(750000000U,  250, 2, 2),
-	PLL_1416X_RATE(700000000U,  350, 3, 2),
-	PLL_1416X_RATE(600000000U,  300, 3, 2),
-};
-
-static const struct imx_pll14xx_rate_table imx8mm_drampll_tbl[] = {
-	PLL_1443X_RATE(650000000U, 325, 3, 2, 0),
-};
-
-static struct imx_pll14xx_clk imx8mm_dram_pll __initdata = {
-		.type = PLL_1443X,
-		.rate_table = imx8mm_drampll_tbl,
-		.rate_count = ARRAY_SIZE(imx8mm_drampll_tbl),
-};
-
-static struct imx_pll14xx_clk imx8mm_arm_pll __initdata = {
-		.type = PLL_1416X,
-		.rate_table = imx8mm_pll1416x_tbl,
-		.rate_count = ARRAY_SIZE(imx8mm_pll1416x_tbl),
-};
-
-static struct imx_pll14xx_clk imx8mm_sys_pll __initdata = {
-		.type = PLL_1416X,
-		.rate_table = imx8mm_pll1416x_tbl,
-		.rate_count = ARRAY_SIZE(imx8mm_pll1416x_tbl),
-};
-
 static const char *pll_ref_sels[] = { "clock-osc-24m", "dummy", "dummy", "dummy", };
 static const char *dram_pll_bypass_sels[] = {"dram_pll", "dram_pll_ref_sel", };
 static const char *arm_pll_bypass_sels[] = {"arm_pll", "arm_pll_ref_sel", };
@@ -164,19 +114,19 @@ static int imx8mm_clk_probe(struct udevice *dev)
 
 	clk_dm(IMX8MM_DRAM_PLL,
 	       imx_clk_pll14xx("dram_pll", "dram_pll_ref_sel",
-			       base + 0x50, &imx8mm_dram_pll));
+			       base + 0x50, &imx_1443x_dram_pll));
 	clk_dm(IMX8MM_ARM_PLL,
 	       imx_clk_pll14xx("arm_pll", "arm_pll_ref_sel",
-			       base + 0x84, &imx8mm_arm_pll));
+			       base + 0x84, &imx_1416x_pll));
 	clk_dm(IMX8MM_SYS_PLL1,
 	       imx_clk_pll14xx("sys_pll1", "sys_pll1_ref_sel",
-			       base + 0x94, &imx8mm_sys_pll));
+			       base + 0x94, &imx_1416x_pll));
 	clk_dm(IMX8MM_SYS_PLL2,
 	       imx_clk_pll14xx("sys_pll2", "sys_pll2_ref_sel",
-			       base + 0x104, &imx8mm_sys_pll));
+			       base + 0x104, &imx_1416x_pll));
 	clk_dm(IMX8MM_SYS_PLL3,
 	       imx_clk_pll14xx("sys_pll3", "sys_pll3_ref_sel",
-			       base + 0x114, &imx8mm_sys_pll));
+			       base + 0x114, &imx_1416x_pll));
 
 	/* PLL bypass out */
 	clk_dm(IMX8MM_DRAM_PLL_BYPASS,
drivers/clk/imx/clk-imx8mn.c +5 -55

80 lines not on this page · raw message

drivers/clk/imx/clk-imx8mp.c +10 -55

77 lines not on this page · raw message

drivers/clk/imx/clk-imx8mq.c +6 -53

85 lines not on this page · raw message

drivers/clk/imx/clk-pll14xx.c +61 -0

67 lines not on this page · raw message

drivers/clk/imx/clk.h +4 -0
index 60f287046b9..0e1eaf03d41 100644
@@ -41,6 +41,10 @@ struct imx_pll14xx_clk {
 	int flags;
 };
 
+extern struct imx_pll14xx_clk imx_1416x_pll;
+extern struct imx_pll14xx_clk imx_1443x_pll;
+extern struct imx_pll14xx_clk imx_1443x_dram_pll;
+
 struct clk *imx_clk_pll14xx(const char *name, const char *parent_name,
 			    void __iomem *base,
 			    const struct imx_pll14xx_clk *pll_clk);
Signature · 1 line
2.25.1
#6 lore raw

PATCH v7 3/3 clk: imx8m: reduce rate table duplication

Quoted 5 lines

Re-factor the imx8m[nmpq] rate tables into the common pll1416x clock driver.
43cdaa1567ad3 ("clk: imx8mm: Move 1443X/1416X PLL clock structure to common place")

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================