Skip to contentSkip to conversation

i2c: mv64xxx: Add atomic_xfer method to driver

PATCH In review Chris Morgan 3 participants 3 messages Mar 30, 2022 – May 25, 2022

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 i2c: mv64xxx: Add atomic_xfer method to driver

From: Chris Morgan <[email protected]>

Add an atomic_xfer method to the driver so that it behaves correctly when controlling a PMIC that is responsible for device shutdown.

The atomic_xfer method added is similar to the one from the i2c-rk3x driver. When running an atomic_xfer a bool flag in the driver data is set, the interrupt is not unmasked on transfer start, and the IRQ handler is manually invoked while waiting for pending transfers to complete.

---
 drivers/i2c/busses/i2c-mv64xxx.c | 52 ++++++++++++++++++++++++++++----
 1 file changed, 46 insertions(+), 6 deletions(-)
drivers/i2c/busses/i2c-mv64xxx.c +46 -6
index 5c8e94b6cdb5..9c66904eebe9 100644
@@ -150,6 +150,7 @@ struct mv64xxx_i2c_data {
 	/* Clk div is 2 to the power n, not 2 to the power n + 1 */
 	bool			clk_n_base_0;
 	struct i2c_bus_recovery_info	rinfo;
+	bool			atomic;
 };
 
 static struct mv64xxx_i2c_regs mv64xxx_i2c_regs_mv64xxx = {
@@ -179,7 +180,10 @@ mv64xxx_i2c_prepare_for_io(struct mv64xxx_i2c_data *drv_data,
 	u32	dir = 0;
 
 	drv_data->cntl_bits = MV64XXX_I2C_REG_CONTROL_ACK |
-		MV64XXX_I2C_REG_CONTROL_INTEN | MV64XXX_I2C_REG_CONTROL_TWSIEN;
+			      MV64XXX_I2C_REG_CONTROL_TWSIEN;
+
+	if (!drv_data->atomic)
+		drv_data->cntl_bits |= MV64XXX_I2C_REG_CONTROL_INTEN;
 
 	if (msg->flags & I2C_M_RD)
 		dir = 1;
@@ -409,7 +413,8 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data)
 	case MV64XXX_I2C_ACTION_RCV_DATA_STOP:
 		drv_data->msg->buf[drv_data->byte_posn++] =
 			readl(drv_data->reg_base + drv_data->reg_offsets.data);
-		drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN;
+		if (!drv_data->atomic)
+			drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN;
 		writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP,
 			drv_data->reg_base + drv_data->reg_offsets.control);
 		drv_data->block = 0;
@@ -427,7 +432,8 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data)
 		drv_data->rc = -EIO;
 		fallthrough;
 	case MV64XXX_I2C_ACTION_SEND_STOP:
-		drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN;
+		if (!drv_data->atomic)
+			drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN;
 		writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP,
 			drv_data->reg_base + drv_data->reg_offsets.control);
 		drv_data->block = 0;
@@ -575,6 +581,17 @@ mv64xxx_i2c_wait_for_completion(struct mv64xxx_i2c_data *drv_data)
 		spin_unlock_irqrestore(&drv_data->lock, flags);
 }
 
+static void mv64xxx_i2c_wait_polling(struct mv64xxx_i2c_data *drv_data)
+{
+	ktime_t timeout = ktime_add_ms(ktime_get(), drv_data->adapter.timeout);
+
+	while (READ_ONCE(drv_data->block) &&
+	       ktime_compare(ktime_get(), timeout) < 0) {
+		udelay(5);
+		mv64xxx_i2c_intr(0, drv_data);
+	}
+}
+
 static int
 mv64xxx_i2c_execute_msg(struct mv64xxx_i2c_data *drv_data, struct i2c_msg *msg,
 				int is_last)
@@ -590,7 +607,11 @@ mv64xxx_i2c_execute_msg(struct mv64xxx_i2c_data *drv_data, struct i2c_msg *msg,
 	mv64xxx_i2c_send_start(drv_data);
 	spin_unlock_irqrestore(&drv_data->lock, flags);
 
-	mv64xxx_i2c_wait_for_completion(drv_data);
+	if (!drv_data->atomic)
+		mv64xxx_i2c_wait_for_completion(drv_data);
+	else
+		mv64xxx_i2c_wait_polling(drv_data);
+
 	return drv_data->rc;
 }
 
@@ -717,7 +738,7 @@ mv64xxx_i2c_functionality(struct i2c_adapter *adap)
 }
 
 static int
-mv64xxx_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
+mv64xxx_i2c_xfer_core(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 {
 	struct mv64xxx_i2c_data *drv_data = i2c_get_adapdata(adap);
 	int rc, ret = num;
@@ -730,7 +751,7 @@ mv64xxx_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	drv_data->msgs = msgs;
 	drv_data->num_msgs = num;
 
-	if (mv64xxx_i2c_can_offload(drv_data))
+	if (mv64xxx_i2c_can_offload(drv_data) && !drv_data->atomic)
 		rc = mv64xxx_i2c_offload_xfer(drv_data);
 	else
 		rc = mv64xxx_i2c_execute_msg(drv_data, &msgs[0], num == 1);
@@ -747,8 +768,27 @@ mv64xxx_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	return ret;
 }
 
+static int
+mv64xxx_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
+{
+	struct mv64xxx_i2c_data *drv_data = i2c_get_adapdata(adap);
+
+	drv_data->atomic = 0;
+	return mv64xxx_i2c_xfer_core(adap, msgs, num);
+}
+
+static int mv64xxx_i2c_xfer_atomic(struct i2c_adapter *adap,
+				   struct i2c_msg msgs[], int num)
+{
+	struct mv64xxx_i2c_data *drv_data = i2c_get_adapdata(adap);
+
+	drv_data->atomic = 1;
+	return mv64xxx_i2c_xfer_core(adap, msgs, num);
+}
+
 static const struct i2c_algorithm mv64xxx_i2c_algo = {
 	.master_xfer = mv64xxx_i2c_xfer,
+	.master_xfer_atomic = mv64xxx_i2c_xfer_atomic,
 	.functionality = mv64xxx_i2c_functionality,
 };
 
Signature · 1 line
2.25.1
#1 lore raw
Quoted 5 lines · Chris Morgan

From: Chris Morgan <[email protected]>

Add an atomic_xfer method to the driver so that it behaves correctly when controlling a PMIC that is responsible for device shutdown.

Quoted 7 lines

The atomic_xfer method added is similar to the one from the i2c-rk3x driver. When running an atomic_xfer a bool flag in the driver data is set, the interrupt is not unmasked on transfer start, and the IRQ handler is manually invoked while waiting for pending transfers to complete.

Gregory? Looks reasonable to me.

maintainer Acked-by
#2 lore raw
Quoted 12 lines · Wolfram Sang
Quoted 11 lines · Chris Morgan

From: Chris Morgan <[email protected]>

Add an atomic_xfer method to the driver so that it behaves correctly when controlling a PMIC that is responsible for device shutdown.

The atomic_xfer method added is similar to the one from the i2c-rk3x driver. When running an atomic_xfer a bool flag in the driver data is set, the interrupt is not unmasked on transfer start, and the IRQ handler is manually invoked while waiting for pending transfers to complete.

Quoted 3 lines
Quoted 1 line

Gregory? Looks reasonable to me.

Thanks,

Gregory

Signature · 3 lines
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com