Skip to contentSkip to conversation

ARM: dts: imx: Add support for Data Modul i.MX8M Mini eDM SBC

PATCH Superseded Marek Vasut 2 participants 2 messages Apr 11, 2022 – Apr 12, 2022

Subsystems (3)

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 ARM: dts: imx: Add support for Data Modul i.MX8M Mini eDM SBC

Add support for Data Modul i.MX8M Mini eDM SBC board. This is an evaluation board for various custom display units. Currently supported are serial console, ethernet, eMMC, SD, SPI NOR, USB host and USB OTG.

---
V2: - Disable UHS mode support in SPL, the overhead incured by bringing up UHS
mode in SPL does not make sense for loading less than 1 MiB u-boot.itb.
- Select primary boot device based on boot device indicated by BootROM, either eMMC or SD boot device is supported. Always select the other boot device, SD or eMMC, as fallback boot device.
- Set 'devnum' environment variable based on boot device indicated by BootROM unless the 'devnum' variable is already set. This way it is possible to boot from the same boot media from which BootROM started U-Boot SPL and U-Boot SPL started U-Boot itself.
- Add RB from Fabio
V3: - Drop CONFIG_SYS_PROMPT_HUSH_PS2 and CONFIG_SYS_I2C_SPEED which
were since converted to Kconfig

---
 arch/arm/dts/Makefile                         |    1 +
 .../dts/imx8mm-data-modul-edm-sbc-u-boot.dtsi |  116 ++
 arch/arm/dts/imx8mm-data-modul-edm-sbc.dts    |  996 +++++++++
 arch/arm/mach-imx/imx8m/Kconfig               |    8 +
 board/data_modul/imx8mm_edm_sbc/Kconfig       |   12 +
 board/data_modul/imx8mm_edm_sbc/MAINTAINERS   |    8 +
 board/data_modul/imx8mm_edm_sbc/Makefile      |   13 +
 board/data_modul/imx8mm_edm_sbc/common.c      |   37 +
 .../imx8mm_data_modul_edm_sbc.c               |  110 +
 board/data_modul/imx8mm_edm_sbc/imximage.cfg  |    8 +
 .../data_modul/imx8mm_edm_sbc/lpddr4_timing.h |   14 +
 .../imx8mm_edm_sbc/lpddr4_timing_2G_32.c      | 1845 +++++++++++++++++
 .../imx8mm_edm_sbc/lpddr4_timing_4G_32.c      | 1842 ++++++++++++++++
 board/data_modul/imx8mm_edm_sbc/spl.c         |  179 ++
 configs/imx8mm_data_modul_edm_sbc_defconfig   |  227 ++
 include/configs/imx8mm_data_modul_edm_sbc.h   |  130 ++
 16 files changed, 5546 insertions(+)
 create mode 100644 arch/arm/dts/imx8mm-data-modul-edm-sbc-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx8mm-data-modul-edm-sbc.dts
 create mode 100644 board/data_modul/imx8mm_edm_sbc/Kconfig
 create mode 100644 board/data_modul/imx8mm_edm_sbc/MAINTAINERS
 create mode 100644 board/data_modul/imx8mm_edm_sbc/Makefile
 create mode 100644 board/data_modul/imx8mm_edm_sbc/common.c
 create mode 100644 board/data_modul/imx8mm_edm_sbc/imx8mm_data_modul_edm_sbc.c
 create mode 100644 board/data_modul/imx8mm_edm_sbc/imximage.cfg
 create mode 100644 board/data_modul/imx8mm_edm_sbc/lpddr4_timing.h
 create mode 100644 board/data_modul/imx8mm_edm_sbc/lpddr4_timing_2G_32.c
 create mode 100644 board/data_modul/imx8mm_edm_sbc/lpddr4_timing_4G_32.c
 create mode 100644 board/data_modul/imx8mm_edm_sbc/spl.c
 create mode 100644 configs/imx8mm_data_modul_edm_sbc_defconfig
 create mode 100644 include/configs/imx8mm_data_modul_edm_sbc.h
arch/arm/dts/Makefile +1 -0
index cd9a820f956..f6034f0fcf9 100644
@@ -900,6 +900,7 @@ dtb-$(CONFIG_ARCH_IMX8ULP) += \
 	imx8ulp-evk.dtb
 
 dtb-$(CONFIG_ARCH_IMX8M) += \
+	imx8mm-data-modul-edm-sbc.dtb \
 	imx8mm-evk.dtb \
 	imx8mm-icore-mx8mm-ctouch2.dtb \
 	imx8mm-icore-mx8mm-edimm2.2.dtb \
arch/arm/dts/imx8mm-data-modul-edm-sbc-u-boot.dtsi new file +116 -0

116 lines not on this page · raw message

arch/arm/dts/imx8mm-data-modul-edm-sbc.dts new file +996 -0

996 lines not on this page · raw message

arch/arm/mach-imx/imx8m/Kconfig +8 -0
index fae70499953..7f09d7b26a8 100644
@@ -46,6 +46,13 @@ config TARGET_IMX8MQ_PHANBELL
 	select IMX8MQ
 	select IMX8M_LPDDR4
 
+config TARGET_IMX8MM_DATA_MODUL_EDM_SBC
+	bool "Data Modul eDM SBC i.MX8M Mini"
+	select BINMAN
+	select IMX8MM
+	select IMX8M_LPDDR4
+	select SUPPORT_SPL
+
 config TARGET_IMX8MM_EVK
 	bool "imx8mm LPDDR4 EVK board"
 	select BINMAN
@@ -209,6 +216,7 @@ source "board/advantech/imx8mp_rsb3720a1/Kconfig"
 source "board/beacon/imx8mm/Kconfig"
 source "board/beacon/imx8mn/Kconfig"
 source "board/compulab/imx8mm-cl-iot-gate/Kconfig"
+source "board/data_modul/imx8mm_edm_sbc/Kconfig"
 source "board/engicam/imx8mm/Kconfig"
 source "board/freescale/imx8mq_evk/Kconfig"
 source "board/freescale/imx8mm_evk/Kconfig"
board/data_modul/imx8mm_edm_sbc/Kconfig new file +12 -0
new file mode 100644
index 00000000000..df9871c2240
@@ -0,0 +1,12 @@
+if TARGET_IMX8MM_DATA_MODUL_EDM_SBC
+
+config SYS_BOARD
+	default "imx8mm_edm_sbc"
+
+config SYS_VENDOR
+	default "data_modul"
+
+config SYS_CONFIG_NAME
+	default "imx8mm_data_modul_edm_sbc"
+
+endif
board/data_modul/imx8mm_edm_sbc/MAINTAINERS new file +8 -0
new file mode 100644
index 00000000000..72659c081e2
@@ -0,0 +1,8 @@
+Data Modul eDM SBC i.MX8M Mini
+M:	Marek Vasut <[email protected]>
+S:	Maintained
+F:	arch/arm/dts/imx8mm-data-modul-edm-sbc.dts
+F:	arch/arm/dts/imx8mm-data-modul-edm-sbc-u-boot.dtsi
+F:	board/data_modul/imx8mm_data_modul_edm_sbc/
+F:	configs/imx8mm_data_modul_edm_sbc_defconfig
+F:	include/configs/imx8mm_data_modul_edm_sbc.h
board/data_modul/imx8mm_edm_sbc/Makefile new file +13 -0
new file mode 100644
index 00000000000..eaba85d65b8
@@ -0,0 +1,13 @@
+#
+# Copyright (C) 2022 Marek Vasut <[email protected]>
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+ifdef CONFIG_SPL_BUILD
+obj-y += spl.o lpddr4_timing_2G_32.o lpddr4_timing_4G_32.o
+else
+obj-y += imx8mm_data_modul_edm_sbc.o
+endif
+
+obj-y += common.o
board/data_modul/imx8mm_edm_sbc/common.c new file +37 -0
new file mode 100644
index 00000000000..713f789da67
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2022 Marek Vasut <[email protected]>
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm-generic/gpio.h>
+
+#include "lpddr4_timing.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+u8 dmo_get_memcfg(void)
+{
+	struct gpio_desc gpio[4];
+	u8 memcfg = 0;
+	ofnode node;
+	int i, ret;
+
+	node = ofnode_path("/config");
+	if (!ofnode_valid(node)) {
+		printf("%s: no /config node?\n", __func__);
+		return BIT(2) | BIT(0);
+	}
+
+	ret = gpio_request_list_by_name_nodev(node,
+					      "dmo,ram-coding-gpios",
+					      gpio, ARRAY_SIZE(gpio),
+					      GPIOD_IS_IN);
+	for (i = 0; i < ret; i++)
+		memcfg |= !!dm_gpio_get_value(&(gpio[i])) << i;
+
+	gpio_free_list_nodev(gpio, ret);
+
+	return memcfg;
+}
board/data_modul/imx8mm_edm_sbc/imx8mm_data_modul_edm_sbc.c new file +110 -0

110 lines not on this page · raw message

board/data_modul/imx8mm_edm_sbc/imximage.cfg new file +8 -0
new file mode 100644
index 00000000000..fa0b618128a
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+FIT
+BOOT_FROM	sd
+LOADER		u-boot-spl-ddr.bin	0x7E1000
board/data_modul/imx8mm_edm_sbc/lpddr4_timing.h new file +14 -0
new file mode 100644
index 00000000000..1fab9b14051
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2022 Marek Vasut <[email protected]>
+ */
+
+#ifndef __LPDDR4_TIMING_H__
+#define __LPDDR4_TIMING_H__
+
+extern struct dram_timing_info dmo_imx8mm_sbc_dram_timing_16_32;
+extern struct dram_timing_info dmo_imx8mm_sbc_dram_timing_32_32;
+
+u8 dmo_get_memcfg(void);
+
+#endif /* __LPDDR4_TIMING_H__ */
board/data_modul/imx8mm_edm_sbc/lpddr4_timing_2G_32.c new file +1845 -0

1,659 lines not on this page · raw message

board/data_modul/imx8mm_edm_sbc/lpddr4_timing_4G_32.c new file +1842 -0

1,842 lines not on this page · raw message

board/data_modul/imx8mm_edm_sbc/spl.c new file +179 -0

179 lines not on this page · raw message

configs/imx8mm_data_modul_edm_sbc_defconfig new file +227 -0

227 lines not on this page · raw message

include/configs/imx8mm_data_modul_edm_sbc.h new file +130 -0

130 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Signature · 1 line
2.35.1

Part of the diff is not shown here. View the raw message.

#1 lore raw

PATCH v3 1/1 ARM: dts: imx: Add support for Data Modul i.MX8M Mini eDM SBC

Quoted 9 lines

Add support for Data Modul i.MX8M Mini eDM SBC board. This is an evaluation board for various custom display units. Currently supported are serial console, ethernet, eMMC, SD, SPI NOR, USB host and USB OTG.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================