drm/amdkfd: Check for potential null return of kmalloc_array()
Subsystems (5)
Sasha Levin
maintainerPATCH 1/7 drm/amdkfd: Check for potential null return of kmalloc_array()
From: QintaoShen <[email protected]>
[ Upstream commit ebbb7bb9e80305820dc2328a371c1b35679f2667 ]
As the kmalloc_array() may return null, the 'event_waiters[i].wait' would lead to null-pointer dereference. Therefore, it is better to check the return value of kmalloc_array() to avoid this confusion.
--- drivers/gpu/drm/amd/amdkfd/kfd_events.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/gpu/drm/amd/amdkfd/kfd_events.c +2 -0
@@ -607,6 +607,8 @@ static struct kfd_event_waiter *alloc_event_waiters(uint32_t num_events) event_waiters =kmalloc_array (num_events,sizeof (struct kfd_event_waiter ),GFP_KERNEL ); +if (!event_waiters) +return NULL ;for (i =0 ; (event_waiters) && (i < num_events) ; i++) {INIT_LIST_HEAD (&event_waiters[i].waiters);
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 5/7 gpu: ipu-v3: Fix dev_dbg frequency output
From: Leo Ruan <[email protected]>
[ Upstream commit 070a88fd4a03f921b73a2059e97d55faaa447dab ]
This commit corrects the printing of the IPU clock error percentage if it is between -0.1% to -0.9%. For example, if the pixel clock requested is 27.2 MHz but only 27.0 MHz can be achieved the deviation is -0.8%. But the fixed point math had a flaw and calculated error of 0.2%.
Before:
Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz IPU clock can give 27000000 with divider 10, error 0.2% Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz
After:
Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz IPU clock can give 27000000 with divider 10, error -0.8% Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz
--- drivers/gpu/ipu-v3/ipu-di.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/gpu/ipu-v3/ipu-di.c +3 -2
@@ -460,8 +460,9 @@ static void ipu_di_config_clock(struct ipu_di *di, error = rate / (sig->mode.pixelclock /1000 ); -dev_dbg (di->ipu->dev," IPU clock can give %lu with divider %u, error %d.%u%%\n" , - rate, div, (signed )(error -1000 ) /10 , error %10 ); +dev_dbg (di->ipu->dev," IPU clock can give %lu with divider %u, error %c%d.%d%%\n" , + rate, div, error <1000 ?'-' :'+' , +abs (error -1000 ) /10 ,abs (error -1000 ) %10 );/* Allow a 1% error */ if (error <1010 && error >=990 ) {
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 4/7 net: micrel: fix KS8851_MLL Kconfig
In reply to Sasha LevinFrom: Randy Dunlap <[email protected]>
[ Upstream commit c3efcedd272aa6dd5929e20cf902a52ddaa1197a ]
KS8851_MLL selects MICREL_PHY, which depends on PTP_1588_CLOCK_OPTIONAL, so make KS8851_MLL also depend on PTP_1588_CLOCK_OPTIONAL since 'select' does not follow any dependency chains.
Fixes kconfig warning and build errors:
WARNING: unmet direct dependencies detected for MICREL_PHY
Depends on [m]: NETDEVICES [=y] && PHYLIB [=y] && PTP_1588_CLOCK_OPTIONAL [=m] Selected by [y]:
- KS8851_MLL [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICREL [=y] && HAS_IOMEM [=y]
ld: drivers/net/phy/micrel.o: in function `lan8814_ts_info':
micrel.c:(.text+0xb35): undefined reference to `ptp_clock_index'
ld: drivers/net/phy/micrel.o: in function `lan8814_probe':
micrel.c:(.text+0x2586): undefined reference to `ptp_clock_register'
--- drivers/net/ethernet/micrel/Kconfig | 1 + 1 file changed, 1 insertion(+)
drivers/net/ethernet/micrel/Kconfig +1 -0
@@ -45,6 +45,7 @@ config KS8851 config KS8851_MLL tristate "Micrel KS8851 MLL" depends on HAS_IOMEM + depends on PTP_1588_CLOCK_OPTIONAL select MII ---help--- This platform driver is for Micrel KS8851 Address/data bus
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 6/7 scsi: mvsas: Add PCI ID of RocketRaid 2640
In reply to Sasha LevinFrom: Alexey Galakhov <[email protected]>
[ Upstream commit 5f2bce1e222028dc1c15f130109a17aa654ae6e8 ]
The HighPoint RocketRaid 2640 is a low-cost SAS controller based on Marvell chip. The chip in question was already supported by the kernel, just the PCI ID of this particular board was missing.
--- drivers/scsi/mvsas/mv_init.c | 1 + 1 file changed, 1 insertion(+)
drivers/scsi/mvsas/mv_init.c +1 -0
@@ -679,6 +679,7 @@ static struct pci_device_id mvs_pci_table[] = { { PCI_VDEVICE(ARECA, PCI_DEVICE_ID_ARECA_1300), chip_1300 }, { PCI_VDEVICE(ARECA, PCI_DEVICE_ID_ARECA_1320), chip_1320 }, { PCI_VDEVICE(ADAPTEC2, 0x0450), chip_6440 }, + { PCI_VDEVICE(TTI, 0x2640), chip_6440 }, { PCI_VDEVICE(TTI, 0x2710), chip_9480 }, { PCI_VDEVICE(TTI, 0x2720), chip_9480 }, { PCI_VDEVICE(TTI, 0x2721), chip_9480 },
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 7/7 drivers: net: slip: fix NPD bug in sl_tx_timeout()
In reply to Sasha LevinFrom: Duoming Zhou <[email protected]>
[ Upstream commit ec4eb8a86ade4d22633e1da2a7d85a846b7d1798 ]
When a slip driver is detaching, the slip_close() will act to cleanup necessary resources and sl->tty is set to NULL in slip_close(). Meanwhile, the packet we transmit is blocked, sl_tx_timeout() will be called. Although slip_close() and sl_tx_timeout() use sl->lock to synchronize, we don`t judge whether sl->tty equals to NULL in sl_tx_timeout() and the null pointer dereference bug will happen.
(Thread 1) | (Thread 2)
| slip_close()
| spin_lock_bh(&sl->lock)
| ...
... | sl->tty = NULL //(1)
sl_tx_timeout() | spin_unlock_bh(&sl->lock)
spin_lock(&sl->lock); |
... | ...
tty_chars_in_buffer(sl->tty)|
if (tty->ops->..) //(2) |
... | synchronize_rcu()We set NULL to sl->tty in position (1) and dereference sl->tty in position (2).
This patch adds check in sl_tx_timeout(). If sl->tty equals to NULL, sl_tx_timeout() will goto out.
--- drivers/net/slip/slip.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/slip/slip.c +1 -1
@@ -471,7 +471,7 @@ static void sl_tx_timeout(struct net_device *dev)spin_lock (&sl->lock);if (netif_queue_stopped (dev)) { -if (!netif_running (dev)) +if (!netif_running (dev) || !sl->tty) goto out;/* May be we must check transmitter timeout here ?
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 2/7 scsi: lpfc: Fix queue failures when recovering from PCI parity error
In reply to Sasha LevinFrom: James Smart <[email protected]>
[ Upstream commit df0101197c4d9596682901631f3ee193ed354873 ]
When recovering from a pci-parity error the driver is failing to re-create queues, causing recovery to fail. Looking deeper, it was found that the interrupt vector count allocated on the recovery was fewer than the vectors originally allocated. This disparity resulted in CPU map entries with stale information. When the driver tries to re-create the queues, it attempts to use the stale information which indicates an eq/interrupt vector that was no longer created.
Fix by clearng the cpup map array before enabling and requesting the IRQs in the lpfc_sli_reset_slot_s4 routine().
--- drivers/scsi/lpfc/lpfc_init.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/scsi/lpfc/lpfc_init.c +2 -0
@@ -10921,6 +10921,8 @@ lpfc_io_slot_reset_s4(struct pci_dev *pdev) psli->sli_flag &= ~LPFC_SLI_ACTIVE ;spin_unlock_irq (&phba->hbalock); +/* Init cpu_map array */ +lpfc_cpu_map_array_init (phba);/* Configure and enable interrupt */ intr_mode =lpfc_sli4_enable_intr (phba, phba->intr_mode);if (intr_mode ==LPFC_INTR_ERROR ) {
Signature · 1 line
2.35.1
Sasha Levin
maintainerPATCH 3/7 scsi: ibmvscsis: Increase INITIAL_SRP_LIMIT to 1024
In reply to Sasha LevinFrom: Tyrel Datwyler <[email protected]>
[ Upstream commit 0bade8e53279157c7cc9dd95d573b7e82223d78a ]
The adapter request_limit is hardcoded to be INITIAL_SRP_LIMIT which is currently an arbitrary value of 800. Increase this value to 1024 which better matches the characteristics of the typical IBMi Initiator that supports 32 LUNs and a queue depth of 32.
This change also has the secondary benefit of being a power of two as required by the kfifo API. Since, Commit ab9bb6318b09 ("Partially revert "kfifo: fix kfifo_alloc() and kfifo_init()"") the size of IU pool for each target has been rounded down to 512 when attempting to kfifo_init() those pools with the current request_limit size of 800.
--- drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c +1 -1
@@ -43,7 +43,7 @@#define IBMVSCSIS_VERSION "v0.2" -#define INITIAL_SRP_LIMIT 800 +#define INITIAL_SRP_LIMIT 1024#define DEFAULT_MAX_SECTORS 256#define MAX_TXU 1024 * 1024
Signature · 1 line
2.35.1
Re: [PATCH AUTOSEL 4.9 2/7] scsi: lpfc: Fix queue failures when recovering from PCI parity error
In reply to Sasha LevinHi!
Quoted 3 lines
From: James Smart <[email protected]>
[ Upstream commit
df0101197c4d9596682901631f3ee193ed354873]
There's something strange going on with this commit. It is in autosel for 4.9 and 5.10, but not 4.19. Mistake?
Best regards,
Pavel
Signature · 1 line
People of Russia, stop Putin before his war on Ukraine escalates.