Skip to contentSkip to conversation

Input: iqs7222 - propagate some error codes correctly

PATCH Applied Dan Carpenter 3 participants 3 messages Apr 12, 2022 – Apr 17, 2022

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Input: iqs7222 - propagate some error codes correctly

If fwnode_property_count_u32() returns a negative error code then, because of type promotion, the "count > ARRAY_SIZE(pins)" condition will be true. The negative "count" is type promoted to a high unsigned size_t value.

That means the "else if (count < 0)" condition will always be false and we don't print that error message or propagate the error code from fwnode_property_count_u32() as intended.

Fix this by re-ordering the checks so that we check for negative first.

Fixes e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C")
---
 drivers/input/misc/iqs7222.c | 32 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 16 deletions(-)
drivers/input/misc/iqs7222.c +16 -16
index d800f71043a5..c0b273222092 100644
@@ -1677,14 +1677,14 @@ static int iqs7222_parse_cycle(struct iqs7222_private *iqs7222, int cycle_index)
 		return 0;
 
 	count = fwnode_property_count_u32(cycle_node, "azoteq,tx-enable");
-	if (count > ARRAY_SIZE(pins)) {
-		dev_err(&client->dev, "Invalid number of %s CTx pins\n",
-			fwnode_get_name(cycle_node));
-		return -EINVAL;
-	} else if (count < 0) {
+	if (count < 0) {
 		dev_err(&client->dev, "Failed to count %s CTx pins: %d\n",
 			fwnode_get_name(cycle_node), count);
 		return count;
+	} else if (count > ARRAY_SIZE(pins)) {
+		dev_err(&client->dev, "Invalid number of %s CTx pins\n",
+			fwnode_get_name(cycle_node));
+		return -EINVAL;
 	}
 
 	error = fwnode_property_read_u32_array(cycle_node, "azoteq,tx-enable",
@@ -1807,16 +1807,16 @@ static int iqs7222_parse_chan(struct iqs7222_private *iqs7222, int chan_index)
 
 		count = fwnode_property_count_u32(chan_node,
 						  "azoteq,rx-enable");
-		if (count > ARRAY_SIZE(pins)) {
-			dev_err(&client->dev,
-				"Invalid number of %s CRx pins\n",
-				fwnode_get_name(chan_node));
-			return -EINVAL;
-		} else if (count < 0) {
+		if (count < 0) {
 			dev_err(&client->dev,
 				"Failed to count %s CRx pins: %d\n",
 				fwnode_get_name(chan_node), count);
 			return count;
+		} else if (count > ARRAY_SIZE(pins)) {
+			dev_err(&client->dev,
+				"Invalid number of %s CRx pins\n",
+				fwnode_get_name(chan_node));
+			return -EINVAL;
 		}
 
 		error = fwnode_property_read_u32_array(chan_node,
@@ -1975,14 +1975,14 @@ static int iqs7222_parse_sldr(struct iqs7222_private *iqs7222, int sldr_index)
 	 * the specified resolution.
 	 */
 	count = fwnode_property_count_u32(sldr_node, "azoteq,channel-select");
-	if (count < 3 || count > ARRAY_SIZE(chan_sel)) {
-		dev_err(&client->dev, "Invalid number of %s channels\n",
-			fwnode_get_name(sldr_node));
-		return -EINVAL;
-	} else if (count < 0) {
+	if (count < 0) {
 		dev_err(&client->dev, "Failed to count %s channels: %d\n",
 			fwnode_get_name(sldr_node), count);
 		return count;
+	} else if (count < 3 || count > ARRAY_SIZE(chan_sel)) {
+		dev_err(&client->dev, "Invalid number of %s channels\n",
+			fwnode_get_name(sldr_node));
+		return -EINVAL;
 	}
 
 	error = fwnode_property_read_u32_array(sldr_node,
Signature · 1 line
2.20.1
maintainer Applied
#1 lore raw
Quoted 5 lines · Dan Carpenter

If fwnode_property_count_u32() returns a negative error code then, because of type promotion, the "count > ARRAY_SIZE(pins)" condition will be true. The negative "count" is type promoted to a high unsigned size_t value.

Quoted 8 lines

That means the "else if (count < 0)" condition will always be false and we don't print that error message or propagate the error code from fwnode_property_count_u32() as intended.

Fix this by re-ordering the checks so that we check for negative first.

Fixes e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C")

Applied, thank you.

Signature · 1 line
Dmitry
Acked-by
#2 lore raw

Hi Dan,

Quoted 6 lines · Dmitry Torokhov
Quoted 5 lines · Dan Carpenter

If fwnode_property_count_u32() returns a negative error code then, because of type promotion, the "count > ARRAY_SIZE(pins)" condition will be true. The negative "count" is type promoted to a high unsigned size_t value.

Quoted 8 lines
Quoted 8 lines

That means the "else if (count < 0)" condition will always be false and we don't print that error message or propagate the error code from fwnode_property_count_u32() as intended.

Fix this by re-ordering the checks so that we check for negative first.

Fixes e505edaedcb9 ("Input: add support for Azoteq IQS7222A/B/C")

A bit late on my part, but for what it's worth:

Thanks for sending this; it's a great catch.

Quoted 5 lines

Applied, thank you.

Signature · 1 line
Dmitry

Kind regards,
Jeff LaBundy