iio: core: Convert to use firmware node handle instead of OF node
PATCH 1/1 iio: core: Convert to use firmware node handle instead of OF node
Switch the IIO core to use firmware node handle instead of OF node. This will allow to get label from firmware on non-OF systems.
Note, this doesn't change of_iio_*() APIs for now.
--- drivers/iio/industrialio-core.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-)
drivers/iio/industrialio-core.c +9 -7
@@ -1893,20 +1893,22 @@ static const struct iio_buffer_setup_ops noop_ring_setup_ops;int __iio_device_register (struct iio_dev *indio_dev,struct module *this_mod) {struct iio_dev_opaque *iio_dev_opaque =to_iio_dev_opaque (indio_dev); -const char *label; +struct fwnode_handle *fwnode;int ret;if (!indio_dev->info)return -EINVAL ; iio_dev_opaque->driver_module = this_mod; -/* If the calling driver did not initialize of_node, do it here */ -if (!indio_dev->dev.of_node && indio_dev->dev.parent) - indio_dev->dev.of_node = indio_dev->dev.parent->of_node; - label =of_get_property (indio_dev->dev.of_node,"label" ,NULL ); -if (label) - indio_dev->label = label; +/* If the calling driver did not initialize firmware node, do it here */ +if (dev_fwnode (&indio_dev->dev)) + fwnode =dev_fwnode (&indio_dev->dev); +else + fwnode =dev_fwnode (indio_dev->dev.parent); +device_set_node (&indio_dev->dev, fwnode); + +fwnode_property_read_string (fwnode,"label" , &indio_dev->label); ret =iio_check_unique_scan_index (indio_dev);if (ret <0 )
Signature · 1 line
2.35.1
On Wed, Apr 13, 2022 at 09:02:02PM +0300, Andy Shevchenko wrote:
...
drivers/iio/industrialio-core.c static const struct iio_buffer_setup_ops noop_ring_setup_ops; · line 1908
Quoted 5 lines
drivers/iio/industrialio-core.c +5
-0+/* If the calling driver did not initialize firmware node, do it here */ +if (dev_fwnode (&indio_dev->dev)) + fwnode =dev_fwnode (&indio_dev->dev); +else + fwnode =dev_fwnode (indio_dev->dev.parent);
Can be also done as
fwnode = dev_fwnode(&indio_dev->dev) ?: dev_fwnode(indio_dev->dev.parent);
Signature · 2 lines
With Best Regards, Andy Shevchenko
Quoted 49 lines · Andy Shevchenko
Switch the IIO core to use firmware node handle instead of OF node. This will allow to get label from firmware on non-OF systems.
Note, this doesn't change of_iio_*() APIs for now.
Signed-off-by Andy Shevchenko <[email protected]>---
drivers/iio/industrialio-core.c | 16 +++++++++-------1 file changed, 9 insertions(+), 7 deletions(-)drivers/iio/industrialio-core.c +0
-0@@ -1893,20 +1893,22 @@ static const struct iio_buffer_setup_ops noop_ring_setup_ops;int
__iio_device_register(struct iio_dev *indio_dev, struct module *this_mod)
{
structiio_dev_opaque*iio_dev_opaque=to_iio_dev_opaque(indio_dev);
- const char *label;
+ structfwnode_handle*fwnode;
int ret;
if (!indio_dev->info)
return-EINVAL;
iio_dev_opaque->driver_module =this_mod;
- /* If the calling driver did not initializeof_node, do it here */
- if (!indio_dev->dev.of_node &&indio_dev->dev.parent) - indio_dev->dev.of_node = indio_dev->dev.parent-Quoted 1 line
of_node;
- label =of_get_property(indio_dev->dev.of_node, "label", NULL);
- if (label)
- indio_dev->label = label;
+ /* If the calling driver did not initialize firmware node, do it here */
+ if (dev_fwnode(&indio_dev->dev))
+ fwnode =dev_fwnode(&indio_dev->dev);
+ else
+ fwnode =dev_fwnode(indio_dev->dev.parent); + device_set_node(&indio_dev->dev, fwnode);
+
+ fwnode_property_read_string(fwnode, "label", &indio_dev-
Quoted 4 lines
Quoted 1 line
label);
ret =iio_check_unique_scan_index(indio_dev); if (ret < 0)
Hi Andy,
So I was actually planning to send the same patch today or in the next few days. I do also have the conversion of inkern.c so I guess we can move in 3 different ways:
1. If you are planning or already have some work with it, I'm more than fine in just forgetting my patches and let you do it (you are cleaning all the drivers already)
2. I can send the patch (without this one) already for reviewing... It won't apply because I think there will be some conflicts with some of the drivers you changed already. Fun fact, remove of.h from iio.h and you see some drivers relying on it for property.h and mod_devicetable.h
3. Just wait for your latest patches to be merged and send mine next week.
Up to you :)
- Nuno Sá
Quoted 19 lines · Nuno Sá
Quoted 4 lines · Andy Shevchenko
Switch the IIO core to use firmware node handle instead of OF node. This will allow to get label from firmware on non-OF systems.
Note, this doesn't change of_iio_*() APIs for now.
So I was actually planning to send the same patch today or in the next few days. I do also have the conversion of
inkern.cso I guess we can move in 3 different ways:1. If you are planning or already have some work with it, I'm more than fine in just forgetting my patches and let you do it (you are cleaning all the drivers already)
2. I can send the patch (without this one) already for reviewing... It won't apply because I think there will be some conflicts with some of the drivers you changed already. Fun fact, remove
of.hfromiio.hand you see some drivers relying on it forproperty.handmod_devicetable.h
Quoted 4 lines
3. Just wait for your latest patches to be merged and send mine next week.
Up to you :)
Thanks for letting me know. I think the best course of actions now is to settle down with what I have sent and you then rebase your stuff and sent out for review. I will help with reviewing and I'm glad to hear that you are step ahead of me. I wasn't planning to chase the inkern.c in the future (at least nearest future).
That said, it seems like fits the #3 from the above list you provided.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Jonathan Cameron
maintainerQuoted 6 lines · On Wed, 13 Apr 2022 21:02:02 +0300 Andy Shevchenko…
Switch the IIO core to use firmware node handle instead of OF node. This will allow to get label from firmware on non-OF systems.
Note, this doesn't change of_iio_*() APIs for now.
Signed-off-by Andy Shevchenko <[email protected]>
Applied to the togreg branch of iio.git and pushed out as testing for 0-day to poke at this and see if we missed anything.
Thanks,
Jonathan
Quoted 38 lines
--- drivers/iio/industrialio-core.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-)drivers/iio/industrialio-core.c +9
-7@@ -1893,20 +1893,22 @@ static const struct iio_buffer_setup_ops noop_ring_setup_ops;int __iio_device_register (struct iio_dev *indio_dev,struct module *this_mod) {struct iio_dev_opaque *iio_dev_opaque =to_iio_dev_opaque (indio_dev); -const char *label; +struct fwnode_handle *fwnode;int ret;if (!indio_dev->info)return -EINVAL ; iio_dev_opaque->driver_module = this_mod; -/* If the calling driver did not initialize of_node, do it here */ -if (!indio_dev->dev.of_node && indio_dev->dev.parent) - indio_dev->dev.of_node = indio_dev->dev.parent->of_node; - label =of_get_property (indio_dev->dev.of_node,"label" ,NULL ); -if (label) - indio_dev->label = label; +/* If the calling driver did not initialize firmware node, do it here */ +if (dev_fwnode (&indio_dev->dev)) + fwnode =dev_fwnode (&indio_dev->dev); +else + fwnode =dev_fwnode (indio_dev->dev.parent); +device_set_node (&indio_dev->dev, fwnode); + +fwnode_property_read_string (fwnode,"label" , &indio_dev->label); ret =iio_check_unique_scan_index (indio_dev);if (ret <0 )