Several changes for UFSHPB
v2 cover Several changes for UFSHPB
From: Bean Huo <[email protected]>
Hi UFS driver developers/reviewers
Here are some changes to the UFS HPB driver. They are all based on Martin's Git repo 5.18/scsi-staging branch. Please refer to the patch submission information for the specific purpose of each patch. I tested them on my own platform. Please have a review and any comments and suggestions are welcome.
v1--v2:
1. Increase the submission information of the cover letter.
2. Fix coding style issues in patch 4/5
3. Add new patch 5/5.
Bean Huo (5):
scsi: ufshpb: Merge ufshpb_reset() and ufshpb_reset_host()
scsi: ufshpb: Remove 0 assignment for enum value
scsi: ufshpb: Cleanup the handler when device reset HPB information
scsi: ufshpb: Add handing of device reset HPB regions Infos in HPB
device mode
scsi: ufshpb: Cleanup ufshpb_suspend/resume
drivers/scsi/ufs/ufshcd.c | 4 +- drivers/scsi/ufs/ufshpb.c | 157 ++++++++++++++++++++++---------------- drivers/scsi/ufs/ufshpb.h | 10 +-- 3 files changed, 98 insertions(+), 73 deletions(-)
Signature · 1 line
2.34.1
PATCH v2 1/5 scsi: ufshpb: Merge ufshpb_reset() and ufshpb_reset_host()
From: Bean Huo <[email protected]>
There is no functional change in this patch, just merge ufshpb_reset() and ufshpb_reset_host() into one function ufshpb_toggle()
--- drivers/scsi/ufs/ufshcd.c | 4 ++-- drivers/scsi/ufs/ufshpb.c | 36 +++++++++++++----------------------- drivers/scsi/ufs/ufshpb.h | 6 ++---- 3 files changed, 17 insertions(+), 29 deletions(-)
drivers/scsi/ufs/ufshcd.c +2 -2
@@ -7223,7 +7223,7 @@ static int ufshcd_host_reset_and_restore(struct ufs_hba *hba)* Stop the host controller and complete the requests * cleared by h/w */ -ufshpb_reset_host (hba); +ufshpb_toggle (hba,HPB_PRESENT ,HPB_RESET );ufshcd_hba_stop (hba); hba->silence_err_logs = true;ufshcd_complete_requests (hba);
@@ -8184,7 +8184,7 @@ static int ufshcd_probe_hba(struct ufs_hba *hba, bool init_dev_params)/* Enable Auto-Hibernate if configured */ ufshcd_auto_hibern8_enable (hba); -ufshpb_reset (hba); +ufshpb_toggle (hba,HPB_RESET ,HPB_PRESENT ); out:spin_lock_irqsave (hba->host->host_lock, flags);if (ret)
drivers/scsi/ufs/ufshpb.c +13 -23
@@ -2278,38 +2278,28 @@ static bool ufshpb_check_hpb_reset_query(struct ufs_hba *hba)return flag_res; } -void ufshpb_reset (struct ufs_hba *hba) +/** +* ufshpb_toggle - switch HPB state of all LUs +* @hba: per-adapter instance +* @src: expected current HPB state +* @dest: target HPB state to switch to +*/ +void ufshpb_toggle (struct ufs_hba *hba,enum UFSHPB_STATE src,enum UFSHPB_STATE dest) {struct ufshpb_lu *hpb;struct scsi_device *sdev;shost_for_each_device (sdev, hba->host) { hpb =ufshpb_get_hpb_data (sdev); -if (!hpb) -continue ; - -if (ufshpb_get_state (hpb) !=HPB_RESET ) -continue ; - -ufshpb_set_state (hpb,HPB_PRESENT ); - } -} - -void ufshpb_reset_host (struct ufs_hba *hba) -{ -struct ufshpb_lu *hpb; -struct scsi_device *sdev; -shost_for_each_device (sdev, hba->host) { - hpb =ufshpb_get_hpb_data (sdev); -if (!hpb) +if (!hpb ||ufshpb_get_state (hpb) != src)continue ; +ufshpb_set_state (hpb, dest); -if (ufshpb_get_state (hpb) !=HPB_PRESENT ) -continue ; -ufshpb_set_state (hpb,HPB_RESET ); -ufshpb_cancel_jobs (hpb); -ufshpb_discard_rsp_lists (hpb); +if (dest ==HPB_RESET ) { +ufshpb_cancel_jobs (hpb); +ufshpb_discard_rsp_lists (hpb); + } } }
drivers/scsi/ufs/ufshpb.h +2 -4
@@ -288,8 +288,7 @@ static int ufshpb_prep(struct ufs_hba *hba, struct ufshcd_lrb *lrbp) { return 0;static void ufshpb_rsp_upiu (struct ufs_hba *hba,struct ufshcd_lrb *lrbp) {}static void ufshpb_resume (struct ufs_hba *hba) {}static void ufshpb_suspend (struct ufs_hba *hba) {} -static void ufshpb_reset (struct ufs_hba *hba) {} -static void ufshpb_reset_host (struct ufs_hba *hba) {} +static void ufshpb_toggle (struct ufs_hba *hba,enum UFSHPB_STATE src,enum UFSHPB_STATE dest) {}static void ufshpb_init (struct ufs_hba *hba) {}static void ufshpb_init_hpb_lu (struct ufs_hba *hba,struct scsi_device *sdev) {}static void ufshpb_destroy_lu (struct ufs_hba *hba,struct scsi_device *sdev) {}
@@ -303,8 +302,7 @@ int ufshpb_prep(struct ufs_hba *hba, struct ufshcd_lrb *lrbp);void ufshpb_rsp_upiu (struct ufs_hba *hba,struct ufshcd_lrb *lrbp);void ufshpb_resume (struct ufs_hba *hba);void ufshpb_suspend (struct ufs_hba *hba); -void ufshpb_reset (struct ufs_hba *hba); -void ufshpb_reset_host (struct ufs_hba *hba); +void ufshpb_toggle (struct ufs_hba *hba,enum UFSHPB_STATE src,enum UFSHPB_STATE dest);void ufshpb_init (struct ufs_hba *hba);void ufshpb_init_hpb_lu (struct ufs_hba *hba,struct scsi_device *sdev);void ufshpb_destroy_lu (struct ufs_hba *hba,struct scsi_device *sdev);
Signature · 1 line
2.34.1
RE: [PATCH v2 1/5] scsi: ufshpb: Merge ufshpb_reset() and ufshpb_reset_host()
Hi Bean,
Quoted 40 lines
From: Bean Huo <[email protected]>
There is no functional change in this patch, just merge
ufshpb_reset()andufshpb_reset_host()into one functionufshpb_toggle()Signed-off-by Bean Huo <[email protected]>---
drivers/scsi/ufs/ufshcd.c | 4 ++-- drivers/scsi/ufs/ufshpb.c | 36 +++++++++++++----------------------- drivers/scsi/ufs/ufshpb.h | 6 ++---- 3 files changed, 17 insertions(+), 29 deletions(-)drivers/scsi/ufs/ufshcd.c +2
-2@@ -7223,7 +7223,7 @@ static int ufshcd_host_reset_and_restore(struct ufs_hba *hba)* Stop the host controller and complete the requests * cleared by h/w */ -ufshpb_reset_host (hba); +ufshpb_toggle (hba,HPB_PRESENT ,HPB_RESET );ufshcd_hba_stop (hba); hba->silence_err_logs = true;ufshcd_complete_requests (hba);@@ -8184,7 +8184,7 @@ static int ufshcd_probe_hba(struct ufs_hba *hba, bool init_dev_params)/* Enable Auto-Hibernate if configured */ ufshcd_auto_hibern8_enable (hba); -ufshpb_reset (hba); +ufshpb_toggle (hba,HPB_RESET ,HPB_PRESENT );out:
spin_lock_irqsave(hba->host->host_lock, flags); if (ret)drivers/scsi/ufs/ufshpb.c +0
-0@@ -2278,38 +2278,28 @@ static bool ufshpb_check_hpb_reset_query(struct ufs_hba *hba)return flag_res;
drivers/scsi/ufs/ufshpb.c static bool ufshpb_check_hpb_reset_query(struct ufs_hba *hba) · line 2287
Quoted 10 lines
drivers/scsi/ufs/ufshpb.c +7
-1} -void ufshpb_reset (struct ufs_hba *hba) +/** +* ufshpb_toggle - switch HPB state of all LUs +* @hba: per-adapter instance +* @src: expected current HPB state +* @dest: target HPB state to switch to +*/ +void ufshpb_toggle (struct ufs_hba *hba,enum UFSHPB_STATE src,enum UFSHPB_STATE dest)
How about changing it to something like ufshpb_state_toggle()?
Best Regards,
Keoseong Park
Quoted 68 lines
drivers/scsi/ufs/ufshpb.c +6
-22{struct ufshpb_lu *hpb;struct scsi_device *sdev;shost_for_each_device (sdev, hba->host) { hpb =ufshpb_get_hpb_data (sdev); -if (!hpb) -continue ; - -if (ufshpb_get_state (hpb) !=HPB_RESET ) -continue ; - -ufshpb_set_state (hpb,HPB_PRESENT ); - } -} - -void ufshpb_reset_host (struct ufs_hba *hba) -{ -struct ufshpb_lu *hpb; -struct scsi_device *sdev; -shost_for_each_device (sdev, hba->host) { - hpb =ufshpb_get_hpb_data (sdev); -if (!hpb) +if (!hpb ||ufshpb_get_state (hpb) != src)continue ; +ufshpb_set_state (hpb, dest); -if (ufshpb_get_state (hpb) !=HPB_PRESENT ) -continue ; -ufshpb_set_state (hpb,HPB_RESET ); -ufshpb_cancel_jobs (hpb); -ufshpb_discard_rsp_lists (hpb); +if (dest ==HPB_RESET ) { +ufshpb_cancel_jobs (hpb); +ufshpb_discard_rsp_lists (hpb); + } } }drivers/scsi/ufs/ufshpb.h +2
-4@@ -288,8 +288,7 @@ static int ufshpb_prep(struct ufs_hba *hba, struct ufshcd_lrb *lrbp) { return 0;static void ufshpb_rsp_upiu (struct ufs_hba *hba,struct ufshcd_lrb *lrbp) {}static void ufshpb_resume (struct ufs_hba *hba) {}static void ufshpb_suspend (struct ufs_hba *hba) {} -static void ufshpb_reset (struct ufs_hba *hba) {} -static void ufshpb_reset_host (struct ufs_hba *hba) {} +static void ufshpb_toggle (struct ufs_hba *hba,enum UFSHPB_STATE src,enum UFSHPB_STATE dest) {}static void ufshpb_init (struct ufs_hba *hba) {}static void ufshpb_init_hpb_lu (struct ufs_hba *hba,struct scsi_device *sdev) {}static void ufshpb_destroy_lu (struct ufs_hba *hba,struct scsi_device *sdev) {}@@ -303,8 +302,7 @@ int ufshpb_prep(struct ufs_hba *hba, struct ufshcd_lrb *lrbp);void ufshpb_rsp_upiu (struct ufs_hba *hba,struct ufshcd_lrb *lrbp);void ufshpb_resume (struct ufs_hba *hba);void ufshpb_suspend (struct ufs_hba *hba); -void ufshpb_reset (struct ufs_hba *hba); -void ufshpb_reset_host (struct ufs_hba *hba); +void ufshpb_toggle (struct ufs_hba *hba,enum UFSHPB_STATE src,enum UFSHPB_STATE dest);void ufshpb_init (struct ufs_hba *hba);void ufshpb_init_hpb_lu (struct ufs_hba *hba,struct scsi_device *sdev);void ufshpb_destroy_lu (struct ufs_hba *hba,struct scsi_device *sdev);Signature · 1 line
2.34.1
Re: [PATCH v2 1/5] scsi: ufshpb: Merge ufshpb_reset() and ufshpb_reset_host()
Quoted 6 lines · Keoseong Park
Quoted 2 lines
+void
ufshpb_toggle(struct ufs_hba *hba, enum UFSHPB_STATE src, enum UFSHPB_STATE dest)How about changing it to something like
ufshpb_state_toggle()?Best Regards,
Keoseong Park
ufshpb_state_toggle() is much better, I will change it in the next version. Thanks.
Kind regards,
Bean
Re: [PATCH v2 1/5] scsi: ufshpb: Merge ufshpb_reset() and ufshpb_reset_host()
Quoted 10 lines · Bean Huo
Quoted 6 lines · Keoseong Park
Quoted 2 lines
+void
ufshpb_toggle(struct ufs_hba *hba, enum UFSHPB_STATE src, enum UFSHPB_STATE dest)How about changing it to something like
ufshpb_state_toggle()?Best Regards,
Keoseong Park
ufshpb_state_toggle()is much better, I will change it in the next version. Thanks.
How about ufshbp_toggle_state() such that the word order is correct?
Thanks,
Bart.
Re: [PATCH v2 1/5] scsi: ufshpb: Merge ufshpb_reset() and ufshpb_reset_host()
Quoted 5 lines · Bart Van Assche
Quoted 5 lines
Quoted 4 lines
How about changing it to something like
ufshpb_state_toggle()?Best Regards,
Keoseong Park
Quoted 8 lines
Quoted 2 lines
ufshpb_state_toggle()is much better, I will change it in the next version. Thanks.How about
ufshbp_toggle_state()such that the word order is correct?Thanks,
Bart.
Sound good, I will change to this one. thanks.
Bean
PATCH v2 2/5 scsi: ufshpb: Remove 0 assignment for enum value
In reply to Bean HuoFrom: Bean Huo <[email protected]>
If the first enumerator has no initializer, the value of the corresponding constant is zero.
--- drivers/scsi/ufs/ufshpb.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/scsi/ufs/ufshpb.h +2 -2
@@ -59,8 +59,8 @@ enum UFSHPB_MODE { };enum UFSHPB_STATE { -HPB_INIT =0 , -HPB_PRESENT =1 , +HPB_INIT , +HPB_PRESENT ,HPB_SUSPEND ,HPB_FAILED ,HPB_RESET ,
Signature · 1 line
2.34.1
RE: [PATCH v2 2/5] scsi: ufshpb: Remove 0 assignment for enum value
Quoted 28 lines
From: Bean Huo <[email protected]>
If the first enumerator has no initializer, the value of the corresponding constant is zero.
Signed-off-by Bean Huo <[email protected]>---
drivers/scsi/ufs/ufshpb.h| 4 ++--1 file changed, 2 insertions(+), 2 deletions(-)drivers/scsi/ufs/ufshpb.h +2
-2@@ -59,8 +59,8 @@ enum UFSHPB_MODE { };enum UFSHPB_STATE { -HPB_INIT =0 , -HPB_PRESENT =1 , +HPB_INIT , +HPB_PRESENT ,HPB_SUSPEND ,HPB_FAILED ,HPB_RESET ,Signature · 1 line
2.34.1
Best Regards,
Keoseong Park
PATCH v2 3/5 scsi: ufshpb: Cleanup the handler when device reset HPB information
In reply to Bean HuoFrom: Bean Huo <[email protected]>
"When the device is powered off by the host, the device may restore L2P map data upon power up or build from the host’s HPB READ command. In case device powered up and lost HPB information, device can signal to the host through HPB Sense data, by setting HPB Operation as ‘2’ which will inform the host that device reset HPB information."
This patch is to clean up the handler and make the intent of this handler more readable, no functional change.
--- drivers/scsi/ufs/ufshpb.c | 35 +++++++++++++++++++++++------------ 1 file changed, 23 insertions(+), 12 deletions(-)
drivers/scsi/ufs/ufshpb.c +23 -12
@@ -1231,7 +1231,10 @@ static void ufshpb_rsp_req_region_update(struct ufshpb_lu *hpb,queue_work (ufshpb_wq, &hpb->map_work); } -static void ufshpb_dev_reset_handler (struct ufshpb_lu *hpb) +/* +* Set the flags of all active regions to RGN_FLAG_UPDATE to let host side reload L2P entries later +*/ +static void ufshpb_set_regions_update (struct ufshpb_lu *hpb) {struct victim_select_info *lru_info = &hpb->lru_info;struct ufshpb_region *rgn;
@@ -1245,6 +1248,24 @@ static void ufshpb_dev_reset_handler(struct ufshpb_lu *hpb)spin_unlock_irqrestore (&hpb->rgn_state_lock, flags); } +static void ufshpb_dev_reset_handler (struct ufs_hba *hba) +{ +struct scsi_device *sdev; +struct ufshpb_lu *hpb; + +__shost_for_each_device (sdev, hba->host) { + hpb =ufshpb_get_hpb_data (sdev); +if (hpb && hpb->is_hcm) +/* +* For the HPB host mode, in case device powered up and lost HPB +* information, we will set the region flag to be RGN_FLAG_UPDATE, +* it will let host reload its L2P entries(re-activate the region +* in the UFS device). +*/ +ufshpb_set_regions_update (hpb); + } +} +/* * This function will parse recommended active subregion information in sense * data field of response UPIU with SAM_STAT_GOOD state.
@@ -1319,17 +1340,7 @@ void ufshpb_rsp_upiu(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)case HPB_RSP_DEV_RESET :dev_warn (&hpb->sdev_ufs_lu->sdev_dev,"UFS device lost HPB information during PM.\n" ); - -if (hpb->is_hcm) { -struct scsi_device *sdev; - -__shost_for_each_device (sdev, hba->host) { -struct ufshpb_lu *h = sdev->hostdata; - -if (h) -ufshpb_dev_reset_handler (h); - } - } +ufshpb_dev_reset_handler (hba);break ;default :
Signature · 1 line
2.34.1
PATCH v2 4/5 scsi: ufshpb: Add handing of device reset HPB regions Infos in HPB device mode
In reply to Bean HuoFrom: Bean Huo <[email protected]>
In UFS HPB Spec JESD220-3A,
"5.8. Active and inactive information upon power cycle
...
When the device is powered off by the host, the device may restore L2P map data upon power up or build from the host’s HPB READ command. In case device powered up and lost HPB information, device can signal to the host through HPB Sense data, by setting HPB Operation as ‘2’ which will inform the host that device reset HPB information."
Therefore, for HPB device control mode, if the UFS device is reset via the RST_N pin, the active region information in the device will be reset. If the host side receives this notification from the device side, it is recommended to inactivate all active regions in the host's HPB cache.
--- drivers/scsi/ufs/ufshpb.c | 73 ++++++++++++++++++++++++++++----------- 1 file changed, 53 insertions(+), 20 deletions(-)
drivers/scsi/ufs/ufshpb.c +53 -20
@@ -1143,6 +1143,39 @@ static int ufshpb_add_region(struct ufshpb_lu *hpb, struct ufshpb_region *rgn)spin_unlock_irqrestore (&hpb->rgn_state_lock, flags);return ret; } +/** +*ufshpb_submit_region_inactive() - submit a region to be inactivated later +*@hpb: per-LU HPB instance +*@region_index: the index associated with the region that will be inactivated later +*/ +static void ufshpb_submit_region_inactive (struct ufshpb_lu *hpb,int region_index) +{ +int subregion_index; +struct ufshpb_region *rgn; +struct ufshpb_subregion *srgn; + +/* +* Remove this region from active region list and add it to inactive list +*/ +spin_lock (&hpb->rsp_list_lock); +ufshpb_update_inactive_info (hpb, region_index); +spin_unlock (&hpb->rsp_list_lock); + + rgn = hpb->rgn_tbl + region_index; + +/* +* Set subregion state to be HPB_SRGN_INVALID, there will no HPB read on this subregion +*/ +spin_lock (&hpb->rgn_state_lock); +if (rgn->rgn_state !=HPB_RGN_INACTIVE ) { +for (subregion_index =0 ; subregion_index < rgn->srgn_cnt; subregion_index++) { + srgn = rgn->srgn_tbl + subregion_index; +if (srgn->srgn_state ==HPB_SRGN_VALID ) + srgn->srgn_state =HPB_SRGN_INVALID ; + } + } +spin_unlock (&hpb->rgn_state_lock); +}static void ufshpb_rsp_req_region_update (struct ufshpb_lu *hpb,struct utp_hpb_rsp *rsp_field)
@@ -1202,25 +1235,8 @@ static void ufshpb_rsp_req_region_update(struct ufshpb_lu *hpb,for (i =0 ; i < rsp_field->inactive_rgn_cnt; i++) { rgn_i =be16_to_cpu (rsp_field->hpb_inactive_field[i]); -dev_dbg (&hpb->sdev_ufs_lu->sdev_dev, -"inactivate(%d) region %d\n" , i, rgn_i); - -spin_lock (&hpb->rsp_list_lock); -ufshpb_update_inactive_info (hpb, rgn_i); -spin_unlock (&hpb->rsp_list_lock); - - rgn = hpb->rgn_tbl + rgn_i; - -spin_lock (&hpb->rgn_state_lock); -if (rgn->rgn_state !=HPB_RGN_INACTIVE ) { -for (srgn_i =0 ; srgn_i < rgn->srgn_cnt; srgn_i++) { - srgn = rgn->srgn_tbl + srgn_i; -if (srgn->srgn_state ==HPB_SRGN_VALID ) - srgn->srgn_state =HPB_SRGN_INVALID ; - } - } -spin_unlock (&hpb->rgn_state_lock); - +dev_dbg (&hpb->sdev_ufs_lu->sdev_dev,"inactivate(%d) region %d\n" , i, rgn_i); +ufshpb_submit_region_inactive (hpb, rgn_i); } out:
@@ -1255,7 +1271,10 @@ static void ufshpb_dev_reset_handler(struct ufs_hba *hba)__shost_for_each_device (sdev, hba->host) { hpb =ufshpb_get_hpb_data (sdev); -if (hpb && hpb->is_hcm) +if (!hpb) +continue ; + +if (hpb->is_hcm) {/* * For the HPB host mode, in case device powered up and lost HPB * information, we will set the region flag to be RGN_FLAG_UPDATE,
@@ -1263,6 +1282,20 @@ static void ufshpb_dev_reset_handler(struct ufs_hba *hba)* in the UFS device). */ ufshpb_set_regions_update (hpb); + }else { +/* +* For the HPB device mode, we add all active regions to inactive list, +* they will be inactivated later in ufshpb_map_work_handler() +*/ +struct victim_select_info *lru_info = &hpb->lru_info; +struct ufshpb_region *rgn; + +list_for_each_entry (rgn, &lru_info->lh_lru_rgn, list_lru_rgn) +ufshpb_submit_region_inactive (hpb, rgn->rgn_idx); + +if (ufshpb_get_state (hpb) ==HPB_PRESENT ) +queue_work (ufshpb_wq, &hpb->map_work); + } } }
Signature · 1 line
2.34.1
RE: [PATCH v2 4/5] scsi: ufshpb: Add handing of device reset HPB regions Infos in HPB device mode
Hi Bean,
Quoted 36 lines
From: Bean Huo <[email protected]>
In UFS HPB Spec JESD220-3A,
"5.8. Active and inactive information upon power cycle
...
When the device is powered off by the host, the device may restore L2P map data upon power up or build from the host’s HPB READ command. In case device powered up and lost HPB information, device can signal to the host through HPB Sense data, by setting HPB Operation as ‘2’ which will inform the host that device reset HPB information."Therefore, for HPB device control mode, if the UFS device is reset via the
RST_Npin, the active region information in the device will be reset. If the host side receives this notification from the device side, it is recommended to inactivate all active regions in the host's HPB cache.Signed-off-by Bean Huo <[email protected]>---
drivers/scsi/ufs/ufshpb.c| 73 ++++++++++++++++++++++++++++-----------1 file changed, 53 insertions(+), 20 deletions(-)drivers/scsi/ufs/ufshpb.c +6
-0@@ -1143,6 +1143,39 @@ static int ufshpb_add_region(struct ufshpb_lu *hpb, struct ufshpb_region *rgn)spin_unlock_irqrestore (&hpb->rgn_state_lock, flags);return ret; } +/** +*ufshpb_submit_region_inactive() - submit a region to be inactivated later +*@hpb: per-LU HPB instance +*@region_index: the index associated with the region that will be inactivated later +*/ +static void ufshpb_submit_region_inactive (struct ufshpb_lu *hpb,int region_index)
drivers/scsi/ufs/ufshpb.c static int ufshpb_add_region(struct ufshpb_lu *hpb, struct ufshpb_region *rgn) · line 1161
Quoted 10 lines
drivers/scsi/ufs/ufshpb.c +10
-0+{ +int subregion_index; +struct ufshpb_region *rgn; +struct ufshpb_subregion *srgn; + +/* +* Remove this region from active region list and add it to inactive list +*/ +spin_lock (&hpb->rsp_list_lock); +ufshpb_update_inactive_info (hpb, region_index);
How about separating the "hpb->stats.rb_inactive_cnt++" code from ufshpb_update_inactive_info()? Because I think this code should only be used in ufshpb_rsp_req_region_update().
Quoted 49 lines
drivers/scsi/ufs/ufshpb.c +19
-19+spin_unlock (&hpb->rsp_list_lock); + + rgn = hpb->rgn_tbl + region_index; + +/* +* Set subregion state to be HPB_SRGN_INVALID, there will no HPB read on this subregion +*/ +spin_lock (&hpb->rgn_state_lock); +if (rgn->rgn_state !=HPB_RGN_INACTIVE ) { +for (subregion_index =0 ; subregion_index < rgn->srgn_cnt; subregion_index++) { + srgn = rgn->srgn_tbl + subregion_index; +if (srgn->srgn_state ==HPB_SRGN_VALID ) + srgn->srgn_state =HPB_SRGN_INVALID ; + } + } +spin_unlock (&hpb->rgn_state_lock); +}static void ufshpb_rsp_req_region_update (struct ufshpb_lu *hpb,struct utp_hpb_rsp *rsp_field)@@ -1202,25 +1235,8 @@ static void ufshpb_rsp_req_region_update(struct ufshpb_lu *hpb,for (i =0 ; i < rsp_field->inactive_rgn_cnt; i++) { rgn_i =be16_to_cpu (rsp_field->hpb_inactive_field[i]); -dev_dbg (&hpb->sdev_ufs_lu->sdev_dev, -"inactivate(%d) region %d\n" , i, rgn_i); - -spin_lock (&hpb->rsp_list_lock); -ufshpb_update_inactive_info (hpb, rgn_i); -spin_unlock (&hpb->rsp_list_lock); - - rgn = hpb->rgn_tbl + rgn_i; - -spin_lock (&hpb->rgn_state_lock); -if (rgn->rgn_state !=HPB_RGN_INACTIVE ) { -for (srgn_i =0 ; srgn_i < rgn->srgn_cnt; srgn_i++) { - srgn = rgn->srgn_tbl + srgn_i; -if (srgn->srgn_state ==HPB_SRGN_VALID ) - srgn->srgn_state =HPB_SRGN_INVALID ; - } - } -spin_unlock (&hpb->rgn_state_lock); - +dev_dbg (&hpb->sdev_ufs_lu->sdev_dev,"inactivate(%d) region %d\n" , i, rgn_i); +ufshpb_submit_region_inactive (hpb, rgn_i); }out:
drivers/scsi/ufs/ufshpb.c static void ufshpb_dev_reset_handler(struct ufs_hba *hba) · line 1279
Quoted 10 lines
drivers/scsi/ufs/ufshpb.c +4
-1@@ -1255,7 +1271,10 @@ static void ufshpb_dev_reset_handler(struct ufs_hba *hba)__shost_for_each_device (sdev, hba->host) { hpb =ufshpb_get_hpb_data (sdev); -if (hpb && hpb->is_hcm) +if (!hpb) +continue ; + +if (hpb->is_hcm) {/* * For the HPB host mode, in case device powered up and lost HPB
For the HPB host control mode, ...
drivers/scsi/ufs/ufshpb.c static void ufshpb_dev_reset_handler(struct ufs_hba *hba) · line 1287
Quoted 8 lines
drivers/scsi/ufs/ufshpb.c +3
-0* information, we will set the region flag to be RGN_FLAG_UPDATE, @@ -1263,6 +1282,20 @@ static void ufshpb_dev_reset_handler(struct ufs_hba *hba)* in the UFS device). */ ufshpb_set_regions_update (hpb); + }else { +/* +* For the HPB device mode, we add all active regions to inactive list,
For the HPB device control mode, ...
Quoted 18 lines
drivers/scsi/ufs/ufshpb.c +11
-0+* they will be inactivated later in ufshpb_map_work_handler() +*/ +struct victim_select_info *lru_info = &hpb->lru_info; +struct ufshpb_region *rgn; + +list_for_each_entry (rgn, &lru_info->lh_lru_rgn, list_lru_rgn) +ufshpb_submit_region_inactive (hpb, rgn->rgn_idx); + +if (ufshpb_get_state (hpb) ==HPB_PRESENT ) +queue_work (ufshpb_wq, &hpb->map_work); + } } }Signature · 1 line
2.34.1
Best Regards,
Keoseong Park
Re: [PATCH v2 4/5] scsi: ufshpb: Add handing of device reset HPB regions Infos in HPB device mode
Quoted 16 lines · Keoseong Park
Quoted 16 lines
+/**
+*ufshpb_submit_region_inactive()- submit a region to be inactivated later
+ *@hpb: per-LU HPB instance
+ *@region_index: the index associated with the region that will be inactivated later
+ */
+static voidufshpb_submit_region_inactive(struct ufshpb_lu *hpb, int region_index)drivers/scsi/ufs/ufshpb.c +7
-0+{ + int subregion_index; + struct ufshpb_region *rgn; + struct ufshpb_subregion *srgn; + + /* +* Remove this region from active region list and add it
Quoted 8 lines
Quoted 4 lines
to inactive list
+ */
+spin_lock(&hpb->rsp_list_lock);
+ufshpb_update_inactive_info(hpb, region_index);How about separating the "hpb->stats.rb_inactive_cnt++" code from
ufshpb_update_inactive_info()?
Because I think this code should only be used inufshpb_rsp_req_region_update().
based on Documentation/ABI/testing/sysfs-driver-ufs:
"What: /sys/class/scsi_device/*/device/hpb_stats/rb_inactive_cnt
Date: June 2021 Contact: Daejun Park <[email protected]> Description: This entry shows the number of inactive regions
recommended by response UPIUs."
This parameter should be increased only when recieving inactive recommended.
I will change it in the next version, thanks.
Kind regards,
Bean
Re: [PATCH v2 4/5] scsi: ufshpb: Add handing of device reset HPB regions Infos in HPB device mode
Quoted 8 lines · Keoseong Park
Quoted 7 lines
Quoted 7 lines
+ /*
+ * Remove this region from active region list and add it to inactive list
+ */
+spin_lock(&hpb->rsp_list_lock);
+ufshpb_update_inactive_info(hpb, region_index);
Quoted 4 lines
Quoted 4 lines
How about separating the "hpb->stats.rb_inactive_cnt++" code from
ufshpb_update_inactive_info()?
Because I think this code should only be used inufshpb_rsp_req_region_update().
Hi Keoseong Park,
I didn't take this hpb->stats.rb_inactive_cnt++ out, since I think if the host receives HPB operation:02h, which means the device recommends the host to de-activate all active regions on the host side. we need to add these de-activations to this parameter because the device has inactivated all active regions. Otherwise, we will find an inconsistent inactivation and activation counter. Please have a look a review the v3.
Kind regards,
Bean
PATCH v2 5/5 scsi: ufshpb: Cleanup ufshpb_suspend/resume
In reply to Bean HuoFrom: Bean Huo <[email protected]>
ufshpb_resume() is only called when the HPB state is HPB_SUSPEND, so the check statement for "ufshpb_get_state(hpb) != HPB_PRESENT" is useless.
--- drivers/scsi/ufs/ufshpb.c | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-)
drivers/scsi/ufs/ufshpb.c +4 -11
@@ -2354,11 +2354,9 @@ void ufshpb_suspend(struct ufs_hba *hba)shost_for_each_device (sdev, hba->host) { hpb =ufshpb_get_hpb_data (sdev); -if (!hpb) +if (!hpb ||ufshpb_get_state (hpb) !=HPB_PRESENT )continue ; -if (ufshpb_get_state (hpb) !=HPB_PRESENT ) -continue ;ufshpb_set_state (hpb,HPB_SUSPEND );ufshpb_cancel_jobs (hpb); }
@@ -2371,20 +2369,15 @@ void ufshpb_resume(struct ufs_hba *hba)shost_for_each_device (sdev, hba->host) { hpb =ufshpb_get_hpb_data (sdev); -if (!hpb) +if (!hpb ||ufshpb_get_state (hpb) !=HPB_SUSPEND )continue ; -if ((ufshpb_get_state (hpb) !=HPB_PRESENT ) && - (ufshpb_get_state (hpb) !=HPB_SUSPEND )) -continue ;ufshpb_set_state (hpb,HPB_PRESENT );ufshpb_kick_map_work (hpb);if (hpb->is_hcm) { -unsigned int poll = - hpb->params.timeout_polling_interval_ms; +unsigned int poll = hpb->params.timeout_polling_interval_ms; -schedule_delayed_work (&hpb->ufshpb_read_to_work, -msecs_to_jiffies (poll)); +schedule_delayed_work (&hpb->ufshpb_read_to_work,msecs_to_jiffies (poll)); } } }
Signature · 1 line
2.34.1