ARM: dts: imx: Fix iMX6QDL DHCOM PDK2 DTC Warnings
Subsystems (6)
PATCH 1/1 ARM: dts: imx: Fix iMX6QDL DHCOM PDK2 DTC Warnings
From: Marcel Ziswiler <[email protected]>
Currently, compiling any i.MX 6 based target results in the following warning:
w+arch/arm/dts/imx6q-dhcom-pdk2.dtb: Warning (pwms_property):
/display-bl:pwms: cell 3 is not a phandle reference
w+arch/arm/dts/imx6q-dhcom-pdk2.dtb: Warning (pwms_property):
/display-bl: Missing property '#pwm-cells' in node /soc/bus@2000000/gpc@20dc000 or bad phandle (referred from pwms[3])
w+arch/arm/dts/imx6dl-dhcom-pdk2.dtb: Warning (pwms_property):
/display-bl:pwms: cell 3 is not a phandle reference
w+arch/arm/dts/imx6dl-dhcom-pdk2.dtb: Warning (pwms_property):
/display-bl: Missing property '#pwm-cells' in node /soc/bus@2000000/gpc@20dc000 or bad phandle (referred from pwms[3])
This is due to the imx6qdl-dhcom-pdk2.dtsi using a later pwm-cells of 3 (e.g. the one with the last cell indicating whether or not it is inverted) then what U-Boot's current imx6qdl.dtsi has. Unfortunately, fixing aka synchronising that one as well would lead to further issues:
w+arch/arm/dts/imx6dl-aristainetos2c_cslb_7.dtb: Warning
(pwms_property): /backlight:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6dl-brppt2.dtb: Warning (pwms_property):
/backlight:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6dl-cubox-i.dtb: Warning (pwms_property):
/pwmleds/front:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6dl-aristainetos2c_7.dtb: Warning (pwms_property):
/backlight:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6dl-cubox-i-emmc-som-v15.dtb: Warning (pwms_property):
/pwmleds/front:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6dl-cubox-i-som-v15.dtb: Warning (pwms_property):
/pwmleds/front:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6dl-icore.dtb: Warning (pwms_property):
/backlight-lvds:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6dl-icore-mipi.dtb: Warning (pwms_property):
/backlight-lvds:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6dl-sabreauto.dtb: Warning (pwms_property):
/backlight:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6dl-sabresd.dtb: Warning (pwms_property):
/backlight-lvds:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6q-cubox-i.dtb: Warning (pwms_property):
/pwmleds/front:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6q-cubox-i-emmc-som-v15.dtb: Warning (pwms_property):
/pwmleds/front:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6q-cubox-i-som-v15.dtb: Warning (pwms_property):
/pwmleds/front:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6q-icore.dtb: Warning (pwms_property):
/backlight-lvds:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6q-icore-mipi.dtb: Warning (pwms_property):
/backlight-lvds:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6q-logicpd.dtb: Warning (pwms_property):
/backlight-lvds:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6q-novena.dtb: Warning (pwms_property):
/backlight:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6q-phytec-mira-rdk-nand.dtb: Warning (pwms_property):
/backlight:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6q-sabreauto.dtb: Warning (pwms_property):
/backlight:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6q-sabresd.dtb: Warning (pwms_property):
/backlight-lvds:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6qp-sabreauto.dtb: Warning (pwms_property):
/backlight:pwms: property size (12) too small for cell size 3
w+arch/arm/dts/imx6qp-sabresd.dtb: Warning (pwms_property):
/backlight-lvds:pwms: property size (12) too small for cell size 3
Messing with all those so late in the game does not seem like too good of an idea. Therefore, I suggest reverting just that one PWM node for now. We may (and really should) properly synchronise all i.MX 6 DTs again in the next cycle.
---
arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi +1 -1
@@ -25,7 +25,7 @@ compatible = "pwm-backlight"; default-brightness-level = <8>; enable-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; /* GPIO G */ - pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>; + pwms = <&pwm1 0 50000>; status = "okay"; };
Signature · 1 line
2.34.1
Quoted 4 lines · Marcel Ziswiler
From: Marcel Ziswiler <[email protected]>
Currently, compiling any i.MX 6 based target results in the following warning:
Oh no.
[...]
arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi line 28
Quoted 13 lines
arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi +1
-1@@ -25,7 +25,7 @@ compatible = "pwm-backlight"; default-brightness-level = <8>; enable-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; /* GPIO G */ - pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>; + pwms = <&pwm1 0 50000>;
I think just pick Linux
fa28d8212ede ("ARM: dts: imx: default to #pwm-cells = <3> in the SoC dtsi files")
That should fix it.
Quoted 26 lines · Marek Vasut
Quoted 4 lines · Marcel Ziswiler
From: Marcel Ziswiler <[email protected]>
Currently, compiling any i.MX 6 based target results in the following warning:
Oh no.
[...]
arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi line 28
Quoted 13 lines
arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi +1
-1@@ -25,7 +25,7 @@ compatible = "pwm-backlight"; default-brightness-level = <8>; enable-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; /* GPIO G */ - pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>; + pwms = <&pwm1 0 50000>;I think just pick Linux
Quoted 2 lines
fa28d8212ede("ARM: dts: imx: default to #pwm-cells = <3> in the SoC dtsi files")
We've just done -rc1, there should be time for re-syncing things.
Signature · 1 line
Tom
Quoted 26 lines · Marek Vasut
Quoted 4 lines · Marcel Ziswiler
From: Marcel Ziswiler <[email protected]>
Currently, compiling any i.MX 6 based target results in the following warning:
Oh no.
[...]
Quoted 10 lines
arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi| 2 +-1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi +0
-0@@ -25,7 +25,7 @@ compatible = "pwm-backlight"; default-brightness-level = <8>;Quoted 3 lines
enable-gpios = <&gpio3 27
GPIO_ACTIVE_HIGH>; /* GPIO G */ - pwms = <&pwm1 0 50000PWM_POLARITY_INVERTED>; + pwms = <&pwm1 0 50000>;I think just pick Linux
Quoted 5 lines
fa28d8212ede("ARM: dts: imx: default to #pwm-cells = <3> in the SoC dtsi files")That should fix it.
Yes, and breaks everything else.
Quoted 27 lines · Marcel Ziswiler
Quoted 26 lines · Marek Vasut
Quoted 4 lines · Marcel Ziswiler
From: Marcel Ziswiler <[email protected]>
Currently, compiling any i.MX 6 based target results in the following warning:
Oh no.
[...]
arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi line 28
Quoted 13 lines
arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi +1
-1@@ -25,7 +25,7 @@ compatible = "pwm-backlight"; default-brightness-level = <8>; enable-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; /* GPIO G */ - pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>; + pwms = <&pwm1 0 50000>;I think just pick Linux
Quoted 7 lines
Quoted 5 lines
fa28d8212ede("ARM: dts: imx: default to #pwm-cells = <3> in the SoC dtsi files")That should fix it.
Yes, and breaks everything else.
Ouch ... so what did Linux do about that breakage ?
btw the polarity flag is correct, the PWM is really inverted.
Fabio Estevam
reviewerHi Marek,
Quoted 1 line · Marek Vasut
Ouch ... so what did Linux do about that breakage ?
Linux treats the third pwm cell as optional.
It seems we need of_pwm_xlate_with_flags() ported to U-Boot.
Thanks
Fabio Estevam
reviewerHi Marcel,
Quoted 4 lines · Marcel Ziswiler
Messing with all those so late in the game does not seem like too good of an idea. Therefore, I suggest reverting just that one PWM node for now. We may (and really should) properly synchronise all i.MX 6 DTs again in the next cycle.
I did an attempt to sync the imx6 dts with Linux and generated the attached patch.
It builds the dtb's cleanly.
Boot tested only on a imx6q-sabresd.
I can send it after 2022.07 is released.
Regards,
Fabio Estevam
From b29e690c55690ae52e2af95fcc795e8ca3ecae62 Mon Sep 17 00:00:00 2001
From: Fabio Estevam <[email protected]>
Date: Tue, 26 Apr 2022 23:43:36 -0300
Subject: [PATCH] imx6: Sync device tree with Linux 5.18-rc4
Sync device tree with Linux 5.18-rc4.
--- arch/arm/dts/imx6-logicpd-baseboard.dtsi | 12 +- arch/arm/dts/imx6-logicpd-som.dtsi | 4 + arch/arm/dts/imx6dl-brppt2.dts | 2 + arch/arm/dts/imx6dl-mamoj.dts | 273 +++++- arch/arm/dts/imx6dl-mba6.dtsi | 10 +- arch/arm/dts/imx6dl-mba6a.dts | 15 +- arch/arm/dts/imx6dl-mba6b.dts | 15 +- arch/arm/dts/imx6dl-nitrogen6x.dts | 12 +- arch/arm/dts/imx6dl-riotboard.dts | 2 + arch/arm/dts/imx6dl-sabreauto.dts | 15 + arch/arm/dts/imx6dl-tqma6a.dtsi | 12 +- arch/arm/dts/imx6dl-tqma6b.dtsi | 12 +- arch/arm/dts/imx6dl.dtsi | 13 +- arch/arm/dts/imx6q-b450v3.dts | 19 +- arch/arm/dts/imx6q-b650v3.dts | 17 +- arch/arm/dts/imx6q-b850v3.dts | 23 +- arch/arm/dts/imx6q-ba16.dtsi | 18 +- arch/arm/dts/imx6q-bx50v3.dtsi | 61 +- arch/arm/dts/imx6q-cm-fx6.dts | 112 ++- arch/arm/dts/imx6q-icore-ofcap10.dts | 28 +- arch/arm/dts/imx6q-logicpd.dts | 18 +- arch/arm/dts/imx6q-marsboard.dts | 2 +- arch/arm/dts/imx6q-mba6.dtsi | 32 +- arch/arm/dts/imx6q-mba6a.dts | 14 +- arch/arm/dts/imx6q-mba6b.dts | 14 +- arch/arm/dts/imx6q-mccmon6.dts | 213 +++-- arch/arm/dts/imx6q-nitrogen6x.dts | 12 +- arch/arm/dts/imx6q-novena.dts | 42 +- arch/arm/dts/imx6q-phytec-mira-rdk-nand.dts | 3 + arch/arm/dts/imx6q-sabrelite.dts | 52 +- arch/arm/dts/imx6q-tbs2910.dts | 9 +- arch/arm/dts/imx6q-tqma6a.dtsi | 12 +- arch/arm/dts/imx6q-tqma6b.dtsi | 11 +- arch/arm/dts/imx6q.dtsi | 36 +- .../arm/dts/imx6qdl-aristainetos2-common.dtsi | 1 + arch/arm/dts/imx6qdl-cubox-i.dtsi | 5 +- arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi | 6 +- arch/arm/dts/imx6qdl-dhcom-som.dtsi | 8 +- arch/arm/dts/imx6qdl-gw51xx.dtsi | 7 +- arch/arm/dts/imx6qdl-gw52xx.dtsi | 10 +- arch/arm/dts/imx6qdl-gw53xx.dtsi | 22 +- arch/arm/dts/imx6qdl-gw54xx.dtsi | 22 +- arch/arm/dts/imx6qdl-gw551x.dtsi | 7 +- arch/arm/dts/imx6qdl-gw552x.dtsi | 29 +- arch/arm/dts/imx6qdl-gw553x.dtsi | 5 +- arch/arm/dts/imx6qdl-gw560x.dtsi | 14 +- arch/arm/dts/imx6qdl-gw5903.dtsi | 6 - arch/arm/dts/imx6qdl-gw5904.dtsi | 27 +- arch/arm/dts/imx6qdl-gw5907.dtsi | 9 +- arch/arm/dts/imx6qdl-gw5910.dtsi | 7 - arch/arm/dts/imx6qdl-gw5912.dtsi | 22 +- arch/arm/dts/imx6qdl-gw5913.dtsi | 10 +- arch/arm/dts/imx6qdl-hummingboard2.dtsi | 2 +- arch/arm/dts/imx6qdl-icore.dtsi | 19 +- arch/arm/dts/imx6qdl-mba6.dtsi | 599 +++++++++--- arch/arm/dts/imx6qdl-mba6a.dtsi | 35 +- arch/arm/dts/imx6qdl-mba6b.dtsi | 40 +- arch/arm/dts/imx6qdl-nitrogen6x.dtsi | 733 +++++++++++++-- arch/arm/dts/imx6qdl-phytec-mira.dtsi | 32 +- arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi | 30 +- arch/arm/dts/imx6qdl-pico.dtsi | 226 ++++- arch/arm/dts/imx6qdl-sabreauto.dtsi | 119 ++- arch/arm/dts/imx6qdl-sabrelite.dtsi | 874 ++++++++++++----- arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi | 6 + arch/arm/dts/imx6qdl-sabresd.dtsi | 214 +++-- arch/arm/dts/imx6qdl-sr-som-ti.dtsi | 1 + arch/arm/dts/imx6qdl-sr-som.dtsi | 22 +- arch/arm/dts/imx6qdl-tqma6.dtsi | 326 +++---- arch/arm/dts/imx6qdl-tqma6a.dtsi | 46 +- arch/arm/dts/imx6qdl-tqma6b.dtsi | 28 +- arch/arm/dts/imx6qdl-udoo.dtsi | 2 + arch/arm/dts/imx6qdl-wandboard-revd1.dtsi | 2 - arch/arm/dts/imx6qdl-wandboard.dtsi | 102 +- arch/arm/dts/imx6qdl.dtsi | 190 ++-- arch/arm/dts/imx6qp-sabreauto.dts | 7 +- arch/arm/dts/imx6qp-sabresd.dts | 10 +- arch/arm/dts/imx6qp.dtsi | 3 +- arch/arm/dts/imx6sl-evk.dts | 183 ++-- arch/arm/dts/imx6sl.dtsi | 348 ++++--- arch/arm/dts/imx6sll-evk.dts | 879 +++++++----------- arch/arm/dts/imx6sll.dtsi | 445 +++++---- arch/arm/dts/imx6sx-sabreauto.dts | 623 ++++++++++--- arch/arm/dts/imx6sx-sdb.dts | 8 +- arch/arm/dts/imx6sx-sdb.dtsi | 56 +- arch/arm/dts/imx6sx-softing-vining-2000.dts | 50 +- arch/arm/dts/imx6sx-udoo-neo.dtsi | 74 ++ arch/arm/dts/imx6sx.dtsi | 127 ++- arch/arm/dts/imx6ul-14x14-evk.dtsi | 161 +++- arch/arm/dts/imx6ul-geam.dts | 363 +++++++- arch/arm/dts/imx6ul-isiot-emmc.dts | 42 +- arch/arm/dts/imx6ul-isiot-nand.dts | 45 +- arch/arm/dts/imx6ul-isiot.dtsi | 330 +++++-- arch/arm/dts/imx6ul-kontron-n6x1x-s.dtsi | 18 +- .../dts/imx6ul-kontron-n6x1x-som-common.dtsi | 30 +- arch/arm/dts/imx6ul-litesom.dtsi | 1 + arch/arm/dts/imx6ul-opos6ul.dtsi | 194 +--- arch/arm/dts/imx6ul-opos6uldev.dts | 387 +------- arch/arm/dts/imx6ul-phytec-phycore-som.dtsi | 21 +- .../dts/imx6ul-phytec-segin-ff-rdk-nand.dts | 2 + arch/arm/dts/imx6ul-phytec-segin.dtsi | 46 +- arch/arm/dts/imx6ul-pico-hobbit.dts | 2 +- arch/arm/dts/imx6ul-pico-pi.dts | 4 +- arch/arm/dts/imx6ul-pico.dtsi | 40 +- arch/arm/dts/imx6ul.dtsi | 186 ++-- arch/arm/dts/imx6ull-colibri.dtsi | 427 +++++---- arch/arm/dts/imx6ull-myir-mys-6ulx-eval.dts | 2 +- .../dts/imx6ull-phytec-segin-ff-rdk-emmc.dts | 1 + arch/arm/dts/imx6ull-phytec-segin.dtsi | 7 - arch/arm/dts/imx6ull.dtsi | 14 + arch/arm/dts/imx6ulz.dtsi | 1 - include/dt-bindings/clock/imx6qdl-clock.h | 14 +- 111 files changed, 6508 insertions(+), 3653 deletions(-)
arch/arm/dts/imx6-logicpd-baseboard.dtsi +8 -4
@@ -212,6 +212,7 @@ &ecspi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; status = "disabled"; };
@@ -237,7 +238,6 @@ compatible = "wlf,wm8962"; reg = <0x1a>; clocks = <&clks IMX6QDL_CLK_CKO>; - clock-names = "xclk"; DCVDD-supply = <®_audio>; DBVDD-supply = <®_audio>; AVDD-supply = <®_audio>;
@@ -249,9 +249,9 @@ gpio-cfg = < 0x0000 /* 0:Default */ 0x0000 /* 1:Default */ - 0x0013 /* 2:FN_DMICCLK */ + 0x0000 /* 2:FN_DMICCLK */ 0x0000 /* 3:Default */ - 0x8014 /* 4:FN_DMICCDAT */ + 0x0000 /* 4:FN_DMICCDAT */ 0x0000 /* 5:Default */ >; };
@@ -328,6 +328,10 @@ pinctrl-0 = <&pinctrl_pwm3>; }; +&snvs_pwrkey { + status = "okay"; +}; + &ssi2 { status = "okay"; };
@@ -379,7 +383,7 @@ MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 - MX6QDL_PAD_KEY_ROW1__ECSPI1_SS0 0x100b1 + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 >; };
arch/arm/dts/imx6-logicpd-som.dtsi +4 -0
@@ -207,6 +207,10 @@ vin-supply = <&sw1c_reg>; }; +&snvs_poweroff { + status = "okay"; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>;
arch/arm/dts/imx6dl-brppt2.dts +2 -0
@@ -161,10 +161,12 @@ }; &pwm3 { + #pwm-cells = <2>; status = "okay"; }; &pwm4 { + #pwm-cells = <2>; status = "okay"; };
arch/arm/dts/imx6dl-mamoj.dts +272 -1
313 lines not on this page · raw message
arch/arm/dts/imx6dl-mba6.dtsi +7 -3
@@ -1,6 +1,10 @@ -// SPDX-License-Identifier: GPL-2.0+ -// -// Copyright (C) 2020 TQ-Systems GmbH +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2013 Sascha Hauer, Pengutronix + * + * Copyright 2013-2021 TQ-Systems GmbH + * Author: Markus Niebel <[email protected]> + */ ðphy { rxdv-skew-ps = <180>;
arch/arm/dts/imx6dl-mba6a.dts +10 -5
@@ -1,6 +1,10 @@ -// SPDX-License-Identifier: GPL-2.0+ -// -// Copyright (C) 2020 TQ-Systems GmbH +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2013 Sascha Hauer, Pengutronix + * + * Copyright 2013-2021 TQ-Systems GmbH + * Author: Markus Niebel <[email protected]> + */ /dts-v1/;
@@ -11,6 +15,7 @@ #include "imx6dl-mba6.dtsi" / { - model = "TQ TQMa6S on MBa6x"; - compatible = "tq,mba6a", "tq,tqma6dl", "fsl,imx6dl"; + model = "TQ TQMa6S/DL on MBa6x"; + compatible = "tq,imx6dl-mba6x-a", "tq,mba6a", + "tq,imx6dl-tqma6dl-a", "fsl,imx6dl"; };
arch/arm/dts/imx6dl-mba6b.dts +10 -5
@@ -1,6 +1,10 @@ -// SPDX-License-Identifier: GPL-2.0+ -// -// Copyright (C) 2020 TQ-Systems GmbH +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2013 Sascha Hauer, Pengutronix + * + * Copyright 2013-2021 TQ-Systems GmbH + * Author: Markus Niebel <[email protected]> + */ /dts-v1/;
@@ -11,6 +15,7 @@ #include "imx6dl-mba6.dtsi" / { - model = "TQ TQMa6S on MBa6x"; - compatible = "tq,mba6b", "tq,tqma6dl", "fsl,imx6dl"; + model = "TQ TQMa6S/DL on MBa6x"; + compatible = "tq,imx6dl-mba6x-b", "tq,mba6b", + "tq,imx6dl-tqma6dl-b", "fsl,imx6dl"; };
arch/arm/dts/imx6dl-nitrogen6x.dts +6 -6
@@ -1,11 +1,11 @@ -// SPDX-License-Identifier: GPL-2.0+ -// -// Copyright 2013-2019 Boundary Devices, Inc. -// Copyright 2012 Freescale Semiconductor, Inc. -// Copyright 2011 Linaro Ltd. +// SPDX-License-Identifier: GPL-2.0 OR X11 +/* + * Copyright 2013 Boundary Devices, Inc. + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + */ /dts-v1/; - #include "imx6dl.dtsi" #include "imx6qdl-nitrogen6x.dtsi"
arch/arm/dts/imx6dl-riotboard.dts +2 -0
@@ -106,6 +106,8 @@ reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; reset-assert-us = <10000>; reset-deassert-us = <1000>; + qca,smarteee-tw-us-1g = <24>; + qca,clk-out-frequency = <125000000>; }; }; };
arch/arm/dts/imx6dl-sabreauto.dts +15 -0
@@ -11,3 +11,18 @@ model = "Freescale i.MX6 DualLite/Solo SABRE Automotive Board"; compatible = "fsl,imx6dl-sabreauto", "fsl,imx6dl"; }; + +&cpu0 { + operating-points = < + /* kHz uV */ + 996000 1275000 + 792000 1175000 + 396000 1150000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 996000 1200000 + 792000 1175000 + 396000 1175000 + >; +};
arch/arm/dts/imx6dl-tqma6a.dtsi +7 -5
@@ -1,14 +1,16 @@ -// SPDX-License-Identifier: GPL-2.0+ -// -// Copyright (C) 2020 TQ-Systems GmbH +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2013 Sascha Hauer, Pengutronix + * Copyright 2013-2017 Markus Niebel <[email protected]> + */ #include "imx6dl.dtsi" #include "imx6qdl-tqma6a.dtsi" #include "imx6qdl-tqma6.dtsi" / { - memory { + memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x20000000>; }; }; -
arch/arm/dts/imx6dl-tqma6b.dtsi +7 -5
@@ -1,14 +1,16 @@ -// SPDX-License-Identifier: GPL-2.0+ -// -// Copyright (C) 2020 TQ-Systems GmbH +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2013 Sascha Hauer, Pengutronix + * Copyright 2013-2017 Markus Niebel <[email protected]> + */ #include "imx6dl.dtsi" #include "imx6qdl-tqma6b.dtsi" #include "imx6qdl-tqma6.dtsi" / { - memory { + memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x20000000>; }; }; -
arch/arm/dts/imx6dl.dtsi +8 -5
@@ -15,7 +15,7 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <0>;
@@ -44,6 +44,8 @@ arm-supply = <®_arm>; pu-supply = <®_pu>; soc-supply = <®_soc>; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; }; cpu@1 {
@@ -64,6 +66,7 @@ 396000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; clocks = <&clks IMX6QDL_CLK_ARM>, <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, <&clks IMX6QDL_CLK_STEP>,
@@ -85,10 +88,6 @@ }; aips1: bus@2000000 { - iomuxc: iomuxc@20e0000 { - compatible = "fsl,imx6dl-iomuxc"; - }; - pxp: pxp@20f0000 { reg = <0x020f0000 0x4000>; interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
@@ -295,6 +294,10 @@ compatible = "fsl,imx6dl-hdmi"; }; +&iomuxc { + compatible = "fsl,imx6dl-iomuxc"; +}; + &ipu1_csi1 { ipu1_csi1_from_ipu1_csi1_mux: endpoint { remote-endpoint = <&ipu1_csi1_mux_to_ipu1_csi1>;
arch/arm/dts/imx6q-b450v3.dts +7 -12
@@ -1,4 +1,3 @@ -// SPDX-License-Identifier: GPL-2.0+ OR X11 /* * Copyright 2015 Timesys Corporation. * Copyright 2015 General Electric Company
@@ -66,13 +65,6 @@ }; }; -&clks { - assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, - <&clks IMX6QDL_CLK_LDB_DI1_SEL>; - assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, - <&clks IMX6QDL_CLK_PLL3_USB_OTG>; -}; - &ldb { status = "okay";
@@ -92,14 +84,19 @@ }; &pca9539 { - P04 { + gpio-line-names = "AMB_P_INT1#", "AMB_P_INT2#", "BT_EN", "WLAN_EN", + "", "SM_D_ACT", "DP1_RST#", "", + "WD15S_EN", "WD15S_DIS#", "", "", + "", "", "", ""; + + P04-hog { gpio-hog; gpios = <4 0>; output-low; line-name = "PCA9539-P04"; }; - P07 { + P07-hog { gpio-hog; gpios = <7 0>; output-low;
@@ -158,5 +155,3 @@ }; }; }; - -#include "imx6q-bx50v3-uboot.dtsi"
arch/arm/dts/imx6q-b650v3.dts +6 -11
@@ -1,4 +1,3 @@ -// SPDX-License-Identifier: GPL-2.0+ OR X11 /* * Copyright 2015 Timesys Corporation. * Copyright 2015 General Electric Company
@@ -66,13 +65,6 @@ }; }; -&clks { - assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, - <&clks IMX6QDL_CLK_LDB_DI1_SEL>; - assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, - <&clks IMX6QDL_CLK_PLL3_USB_OTG>; -}; - &ldb { status = "okay";
@@ -92,7 +84,12 @@ }; &pca9539 { - P07 { + gpio-line-names = "AMB_P_INT1#", "AMB_P_INT2#", "BT_EN", "WLAN_EN", + "", "SM_D_ACT", "DP1_RST#", "", + "WD15S_EN", "WD15S_DIS#", "", "", + "", "", "", ""; + + P07-hog { gpio-hog; gpios = <7 0>; output-low;
@@ -157,5 +154,3 @@ }; }; }; - -#include "imx6q-bx50v3-uboot.dtsi"
arch/arm/dts/imx6q-b850v3.dts +7 -16
@@ -1,4 +1,3 @@ -// SPDX-License-Identifier: GPL-2.0+ OR X11 /* * Copyright 2015 Timesys Corporation. * Copyright 2015 General Electric Company
@@ -54,17 +53,6 @@ }; }; -&clks { - assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, - <&clks IMX6QDL_CLK_LDB_DI1_SEL>, - <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>, - <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>; - assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, - <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, - <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, - <&clks IMX6QDL_CLK_PLL2_PFD2_396M>; -}; - &ldb { fsl,dual-channel; status = "okay";
@@ -211,14 +199,19 @@ }; &pca9539 { - P10 { + gpio-line-names = "AMB_P_INT1#", "AMB_P_INT2#", "BT_EN", "WLAN_EN", + "REMOTE_ON_PML#", "SM_D_ACT", "DP1_RST#", "DP2_RST#", + "", "", "", "", + "", "", "", ""; + + P10-hog { gpio-hog; gpios = <8 0>; output-low; line-name = "PCA9539-P10"; }; - P11 { + P11-hog { gpio-hog; gpios = <9 0>; output-low;
@@ -300,5 +293,3 @@ phy-handle = <&switchphy4>; }; }; - -#include "imx6q-bx50v3-uboot.dtsi"
arch/arm/dts/imx6q-ba16.dtsi +14 -4
@@ -1,4 +1,3 @@ -// SPDX-License-Identifier: GPL-2.0+ OR X11 /* * Support for imx6 based Advantech DMS-BA16 Qseven module *
@@ -125,6 +124,9 @@ regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + pinctrl-0 = <&pinctrl_usbotg_vbus>; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + enable-active-high; }; };
@@ -135,12 +137,12 @@ }; &ecspi1 { - cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; - flash: n25q032@0 { + flash: flash@0 { compatible = "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>;
@@ -173,8 +175,9 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; - status = "okay"; + phy-supply = <®_3p3v>; phy-handle = <&phy0>; + status = "okay"; mdio { #address-cells = <1>;
@@ -346,6 +349,7 @@ }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay";
@@ -586,6 +590,12 @@ >; }; + pinctrl_usbotg_vbus: usbotgvbusgrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0 + >; + }; + pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
arch/arm/dts/imx6q-bx50v3.dtsi +44 -17
161 lines not on this page · raw message
arch/arm/dts/imx6q-cm-fx6.dts +100 -12
144 lines not on this page · raw message
arch/arm/dts/imx6q-icore-ofcap10.dts +16 -12
@@ -12,6 +12,17 @@ / { model = "Engicam i.CoreM6 Quad/Dual OpenFrame Capacitive touch 10.1 Kit"; compatible = "engicam,imx6-icore", "fsl,imx6q"; + + panel { + compatible = "ampire,am-1280800n3tzqw-t00h"; + backlight = <&backlight_lvds>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; }; &ldb {
@@ -22,18 +33,11 @@ fsl,data-width = <24>; status = "okay"; - display-timings { - native-mode = <&timing0>; - timing0: timing0 { - clock-frequency = <60000000>; - hactive = <1280>; - vactive = <800>; - hback-porch = <40>; - hfront-porch = <40>; - vback-porch = <10>; - vfront-porch = <3>; - hsync-len = <80>; - vsync-len = <10>; + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; }; }; };
arch/arm/dts/imx6q-logicpd.dts +14 -4
@@ -9,11 +9,11 @@ / { model = "Logic PD i.MX6QD SOM-M3"; - compatible = "fsl,imx6q"; + compatible = "logicpd,imx6q-logicpd", "fsl,imx6q"; backlight: backlight-lvds { compatible = "pwm-backlight"; - pwms = <&pwm3 0 20000>; + pwms = <&pwm3 0 20000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; power-supply = <®_lcd>;
@@ -21,6 +21,8 @@ panel-lvds0 { compatible = "okaya,rs800480t-7x0gp"; + power-supply = <®_lcd_reset>; + backlight = <&backlight>; port { panel_in_lvds0: endpoint {
@@ -38,7 +40,6 @@ regulator-max-microvolt = <3300000>; gpio = <&gpio4 17 GPIO_ACTIVE_HIGH>; enable-active-high; - regulator-always-on; vin-supply = <®_3v3>; startup-delay-us = <500000>; };
@@ -52,7 +53,6 @@ regulator-max-microvolt = <3300000>; gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; enable-active-high; - regulator-always-on; vin-supply = <®_lcd>; }; };
@@ -73,6 +73,16 @@ status = "okay"; }; +&i2c1 { + touchscreen@26 { + compatible = "ilitek,ili2117"; + reg = <0x26>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touchscreen>; + interrupts-extended = <&gpio1 6 IRQ_TYPE_EDGE_RISING>; + }; +}; + &ldb { status = "okay";
arch/arm/dts/imx6q-marsboard.dts +1 -1
@@ -100,7 +100,7 @@ cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; status = "okay"; - m25p80@0 { + flash@0 { compatible = "microchip,sst25vf016b"; spi-max-frequency = <20000000>; reg = <0>;
arch/arm/dts/imx6q-mba6.dtsi +29 -3
@@ -1,6 +1,16 @@ -// SPDX-License-Identifier: GPL-2.0+ -// -// Copyright (C) 2020 TQ-Systems GmbH +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2013 Sascha Hauer, Pengutronix + * + * Copyright 2013-2021 TQ-Systems GmbH + * Author: Markus Niebel <[email protected]> + */ + +&ecspi5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi5_mba6x>; + cs-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; +}; ðphy { rxdv-skew-ps = <180>;
@@ -16,3 +26,19 @@ txc-skew-ps = <1860>; rxc-skew-ps = <1860>; }; + +&sata { + status = "okay"; +}; + +&iomuxc { + pinctrl_ecspi5_mba6x: ecspi5grp-mba6x { + fsl,pins = < + /* HYS, SPEED = MED, 100k up, DSE = 011, SRE_FAST */ + MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x1b099 + MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0xb099 + MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0xb099 + MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0xb099 /* eCSPI5 SS0 */ + >; + }; +};
arch/arm/dts/imx6q-mba6a.dts +9 -5
@@ -1,10 +1,13 @@ -// SPDX-License-Identifier: GPL-2.0+ -// -// Copyright (C) 2020 TQ-Systems GmbH +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2013 Sascha Hauer, Pengutronix + * + * Copyright 2013-2021 TQ-Systems GmbH + * Author: Markus Niebel <[email protected]> + */ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> #include "imx6q-tqma6a.dtsi" #include "imx6qdl-mba6.dtsi" #include "imx6qdl-mba6a.dtsi"
@@ -12,5 +15,6 @@ / { model = "TQ TQMa6Q on MBa6x"; - compatible = "tq,mba6a", "fsl,imx6q"; + compatible = "tq,imx6q-mba6x-a", "tq,mba6a", + "tq,imx6q-tqma6q-a", "fsl,imx6q"; };
arch/arm/dts/imx6q-mba6b.dts +9 -5
@@ -1,10 +1,13 @@ -// SPDX-License-Identifier: GPL-2.0+ -// -// Copyright (C) 2020 TQ-Systems GmbH +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2013 Sascha Hauer, Pengutronix + * + * Copyright 2013-2021 TQ-Systems GmbH + * Author: Markus Niebel <[email protected]> + */ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> #include "imx6q-tqma6b.dtsi" #include "imx6qdl-mba6.dtsi" #include "imx6qdl-mba6b.dtsi"
@@ -12,5 +15,6 @@ / { model = "TQ TQMa6Q on MBa6x"; - compatible = "tq,mba6b", "fsl,imx6q"; + compatible = "tq,imx6q-mba6x-b", "tq,mba6b", + "tq,imx6q-tqma6q-b", "fsl,imx6q"; };
arch/arm/dts/imx6q-mccmon6.dts +150 -63
274 lines not on this page · raw message
arch/arm/dts/imx6q-nitrogen6x.dts +6 -6
@@ -1,11 +1,11 @@ -// SPDX-License-Identifier: GPL-2.0+ -// -// Copyright 2013-2019 Boundary Devices, Inc. -// Copyright 2012 Freescale Semiconductor, Inc. -// Copyright 2011 Linaro Ltd. +// SPDX-License-Identifier: GPL-2.0 OR X11 +/* + * Copyright 2013 Boundary Devices, Inc. + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + */ /dts-v1/; - #include "imx6q.dtsi" #include "imx6qdl-nitrogen6x.dtsi"
arch/arm/dts/imx6q-novena.dts +24 -18
68 lines not on this page · raw message
arch/arm/dts/imx6q-phytec-mira-rdk-nand.dts +3 -0
@@ -8,6 +8,9 @@ #include "imx6q.dtsi" #include "imx6qdl-phytec-phycore-som.dtsi" #include "imx6qdl-phytec-mira.dtsi" +#include "imx6qdl-phytec-mira-peb-eval-01.dtsi" +#include "imx6qdl-phytec-mira-peb-av-02.dtsi" +#include "imx6qdl-phytec-mira-peb-wlbt-05.dtsi" / { model = "PHYTEC phyBOARD-Mira Quad Carrier-Board with NAND";
arch/arm/dts/imx6q-sabrelite.dts +46 -6
60 lines not on this page · raw message
arch/arm/dts/imx6q-tbs2910.dts +5 -4
@@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ OR MIT // -// Copyright 2014-2019 Soeren Moch <[email protected]> +// Copyright 2014 Soeren Moch <[email protected]> /dts-v1/;
@@ -20,7 +20,7 @@ mmc0 = &usdhc2; mmc1 = &usdhc3; mmc2 = &usdhc4; - usb0 = &usbotg; + /delete-property/ mmc3; }; memory@10000000 {
@@ -106,7 +106,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; - phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; phy-handle = <&phy>; status = "okay";
@@ -117,6 +116,8 @@ phy: ethernet-phy@4 { reg = <4>; qca,clk-out-frequency = <125000000>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; }; }; };
@@ -158,7 +159,7 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - rtc: ds1307@68 { + rtc: rtc@68 { compatible = "dallas,ds1307"; reg = <0x68>; };
arch/arm/dts/imx6q-tqma6a.dtsi +7 -5
@@ -1,14 +1,16 @@ -// SPDX-License-Identifier: GPL-2.0+ -// -// Copyright (C) 2020 TQ-Systems GmbH +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2013 Sascha Hauer, Pengutronix + * Copyright 2013-2017 Markus Niebel <[email protected]> + */ #include "imx6q.dtsi" #include "imx6qdl-tqma6a.dtsi" #include "imx6qdl-tqma6.dtsi" / { - memory { + memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; }; -
arch/arm/dts/imx6q-tqma6b.dtsi +6 -5
@@ -1,14 +1,15 @@ -// SPDX-License-Identifier: GPL-2.0+ -// -// Copyright (C) 2020 TQ-Systems GmbH +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2013 Sascha Hauer, Pengutronix + */ #include "imx6q.dtsi" #include "imx6qdl-tqma6b.dtsi" #include "imx6qdl-tqma6.dtsi" / { - memory { + memory@10000000 { + device_type = "memory"; reg = <0x10000000 0x40000000>; }; }; -
arch/arm/dts/imx6q.dtsi +21 -15
@@ -9,7 +9,6 @@ / { aliases { ipu1 = &ipu2; - video1 = &ipu2; spi4 = &ecspi5; };
@@ -50,6 +49,8 @@ arm-supply = <®_arm>; pu-supply = <®_pu>; soc-supply = <®_soc>; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; }; cpu1: cpu@1 {
@@ -74,6 +75,7 @@ 396000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; clocks = <&clks IMX6QDL_CLK_ARM>, <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, <&clks IMX6QDL_CLK_STEP>,
@@ -108,6 +110,7 @@ 396000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; clocks = <&clks IMX6QDL_CLK_ARM>, <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, <&clks IMX6QDL_CLK_STEP>,
@@ -142,6 +145,7 @@ 396000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; clocks = <&clks IMX6QDL_CLK_ARM>, <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, <&clks IMX6QDL_CLK_STEP>,
@@ -173,15 +177,11 @@ clocks = <&clks IMX6Q_CLK_ECSPI5>, <&clks IMX6Q_CLK_ECSPI5>; clock-names = "ipg", "per"; - dmas = <&sdma 11 8 1>, <&sdma 12 8 2>; + dmas = <&sdma 11 7 1>, <&sdma 12 7 2>; dma-names = "rx", "tx"; status = "disabled"; }; }; - - iomuxc: iomuxc@20e0000 { - compatible = "fsl,imx6q-iomuxc"; - }; }; sata: sata@2200000 {
@@ -406,23 +406,29 @@ &hdmi { compatible = "fsl,imx6q-hdmi"; - port@2 { - reg = <2>; + ports { + port@2 { + reg = <2>; - hdmi_mux_2: endpoint { - remote-endpoint = <&ipu2_di0_hdmi>; + hdmi_mux_2: endpoint { + remote-endpoint = <&ipu2_di0_hdmi>; + }; }; - }; - port@3 { - reg = <3>; + port@3 { + reg = <3>; - hdmi_mux_3: endpoint { - remote-endpoint = <&ipu2_di1_hdmi>; + hdmi_mux_3: endpoint { + remote-endpoint = <&ipu2_di1_hdmi>; + }; }; }; }; +&iomuxc { + compatible = "fsl,imx6q-iomuxc"; +}; + &ipu1_csi1 { ipu1_csi1_from_mipi_vc1: endpoint { remote-endpoint = <&mipi_vc1_to_ipu1_csi1>;
arch/arm/dts/imx6qdl-aristainetos2-common.dtsi +1 -0
@@ -344,6 +344,7 @@ }; &pwm1 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay";
arch/arm/dts/imx6qdl-cubox-i.dtsi +3 -2
@@ -55,12 +55,12 @@ pinctrl-0 = <&pinctrl_cubox_i_ir>; }; - pwmleds { + led-controller { compatible = "pwm-leds"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cubox_i_pwm1>; - front { + led-1 { active-low; label = "imx6:red:front"; max-brightness = <248>;
@@ -233,6 +233,7 @@ }; &pwm1 { + #pwm-cells = <2>; status = "okay"; };
arch/arm/dts/imx6qdl-dhcom-pdk2.dtsi +5 -1
@@ -5,9 +5,9 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/leds/common.h> #include <dt-bindings/pwm/pwm.h> -#include <dt-bindings/input/input.h> / { chosen {
@@ -263,6 +263,10 @@ status = "okay"; }; +&usbh1 { + disable-over-current; +}; + &usdhc2 { /* SD card */ status = "okay"; };
arch/arm/dts/imx6qdl-dhcom-som.dtsi +5 -3
@@ -132,14 +132,15 @@ #size-cells = <0>; ethphy0: ethernet-phy@0 { /* SMSC LAN8710Ai */ - compatible = "ethernet-phy-ieee802.3-c22"; + compatible = "ethernet-phy-id0007.c0f0", + "ethernet-phy-ieee802.3-c22"; interrupt-parent = <&gpio4>; interrupts = <15 IRQ_TYPE_LEVEL_LOW>; pinctrl-0 = <&pinctrl_ethphy0>; pinctrl-names = "default"; reg = <0>; - reset-assert-us = <1000>; - reset-deassert-us = <1000>; + reset-assert-us = <500>; + reset-deassert-us = <500>; reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; smsc,disable-energy-detect; /* Make plugin detection reliable */ };
@@ -728,6 +729,7 @@ pinctrl_usbh1: usbh1-grp { fsl,pins = < MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x120b0 + MX6QDL_PAD_EIM_D30__USB_H1_OC 0x1b0b1 >; };
arch/arm/dts/imx6qdl-gw51xx.dtsi +2 -5
@@ -13,8 +13,8 @@ led0 = &led0; led1 = &led1; nand = &gpmi; - usb0 = &usbotg; - usb1 = &usbh1; + usb0 = &usbh1; + usb1 = &usbotg; }; chosen {
@@ -129,8 +129,6 @@ pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; - phy-reset-duration = <10>; - phy-reset-post-delay = <100>; status = "okay"; };
@@ -452,7 +450,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; disable-over-current; - dr_mode = "otg"; status = "okay"; };
arch/arm/dts/imx6qdl-gw52xx.dtsi +2 -8
@@ -13,11 +13,10 @@ led0 = &led0; led1 = &led1; led2 = &led2; - mmc0 = &usdhc3; nand = &gpmi; ssi0 = &ssi1; - usb0 = &usbotg; - usb1 = &usbh1; + usb0 = &usbh1; + usb1 = &usbotg; }; chosen {
@@ -33,8 +32,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb";
@@ -195,8 +192,6 @@ pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; - phy-reset-duration = <10>; - phy-reset-post-delay = <100>; status = "okay"; };
@@ -547,7 +542,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; disable-over-current; - dr_mode = "otg"; status = "okay"; };
arch/arm/dts/imx6qdl-gw53xx.dtsi +3 -19
@@ -13,11 +13,10 @@ led0 = &led0; led1 = &led1; led2 = &led2; - mmc0 = &usdhc3; nand = &gpmi; ssi0 = &ssi1; - usb0 = &usbotg; - usb1 = &usbh1; + usb0 = &usbh1; + usb1 = &usbotg; }; chosen {
@@ -33,8 +32,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb";
@@ -137,8 +134,7 @@ regulator-name = "usb_h1_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; - enable-active-high; + regulator-always-on; }; reg_usb_otg_vbus: regulator-usb-otg-vbus {
@@ -189,8 +185,6 @@ pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; - phy-reset-duration = <10>; - phy-reset-post-delay = <100>; status = "okay"; };
@@ -545,14 +539,11 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; disable-over-current; - dr_mode = "otg"; status = "okay"; }; &usbh1 { vbus-supply = <®_usb_h1_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1>; status = "okay"; };
@@ -602,7 +593,6 @@ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 - MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 >; };
@@ -723,12 +713,6 @@ >; }; - pinctrl_usbh1: usbh1grp { - fsl,pins = < - MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 - >; - }; - pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
arch/arm/dts/imx6qdl-gw54xx.dtsi +3 -19
@@ -14,11 +14,10 @@ led0 = &led0; led1 = &led1; led2 = &led2; - mmc0 = &usdhc3; nand = &gpmi; ssi0 = &ssi1; - usb0 = &usbotg; - usb1 = &usbh1; + usb0 = &usbh1; + usb1 = &usbotg; }; chosen {
@@ -34,8 +33,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb";
@@ -146,8 +143,7 @@ regulator-name = "usb_h1_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>; - enable-active-high; + regulator-always-on; }; reg_usb_otg_vbus: regulator@3 {
@@ -226,8 +222,6 @@ pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; - phy-reset-duration = <10>; - phy-reset-post-delay = <100>; status = "okay"; };
@@ -615,14 +609,11 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; disable-over-current; - dr_mode = "otg"; status = "okay"; }; &usbh1 { vbus-supply = <®_usb_h1_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1>; status = "okay"; };
@@ -680,7 +671,6 @@ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 - MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 >; };
@@ -818,12 +808,6 @@ >; }; - pinctrl_usbh1: usbh1grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0 - >; - }; - pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
arch/arm/dts/imx6qdl-gw551x.dtsi +2 -5
@@ -57,8 +57,8 @@ led0 = &led0; nand = &gpmi; ssi0 = &ssi1; - usb0 = &usbotg; - usb1 = &usbh1; + usb0 = &usbh1; + usb1 = &usbotg; }; chosen {
@@ -67,8 +67,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb";
@@ -536,7 +534,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; disable-over-current; - dr_mode = "otg"; status = "okay"; };
arch/arm/dts/imx6qdl-gw552x.dtsi +4 -25
@@ -14,8 +14,8 @@ led1 = &led1; led2 = &led2; nand = &gpmi; - usb0 = &usbotg; - usb1 = &usbh1; + usb0 = &usbh1; + usb1 = &usbotg; }; chosen {
@@ -24,8 +24,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb";
@@ -120,15 +118,7 @@ regulator-name = "5P0V"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - }; - - reg_usb_h1_vbus: regulator-usbh1-vbus { - compatible = "regulator-fixed"; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; - enable-active-high; + regulator-always-on; }; };
@@ -399,13 +389,9 @@ &uart5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart5>; - status = "okay"; -}; + status = "okay"; }; &usbh1 { - vbus-supply = <®_usb_h1_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1>; status = "okay"; };
@@ -414,7 +400,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; disable-over-current; - dr_mode = "otg"; status = "okay"; };
@@ -520,12 +505,6 @@ >; }; - pinctrl_usbh1: usbh1grp { - fsl,pins = < - MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 - >; - }; - pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x13059
arch/arm/dts/imx6qdl-gw553x.dtsi +2 -3
@@ -55,8 +55,8 @@ led0 = &led0; led1 = &led1; nand = &gpmi; - usb0 = &usbotg; - usb1 = &usbh1; + usb0 = &usbh1; + usb1 = &usbotg; }; chosen {
@@ -509,7 +509,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; disable-over-current; - dr_mode = "otg"; status = "okay"; };
arch/arm/dts/imx6qdl-gw560x.dtsi +3 -11
@@ -55,11 +55,9 @@ led0 = &led0; led1 = &led1; led2 = &led2; - mmc0 = &usdhc2; - mmc1 = &usdhc3; ssi0 = &ssi1; - usb0 = &usbotg; - usb1 = &usbh1; + usb0 = &usbh1; + usb1 = &usbotg; }; chosen {
@@ -93,8 +91,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb";
@@ -221,8 +217,7 @@ regulator-name = "usb_h1_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; - enable-active-high; + regulator-always-on; }; reg_usb_otg_vbus: regulator-usb-otg-vbus {
@@ -280,8 +275,6 @@ pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; - phy-reset-duration = <10>; - phy-reset-post-delay = <100>; status = "okay"; };
@@ -661,7 +654,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; disable-over-current; - dr_mode = "otg"; status = "okay"; };
arch/arm/dts/imx6qdl-gw5903.dtsi +0 -6
@@ -75,8 +75,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb";
@@ -223,9 +221,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; - phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; - phy-reset-duration = <10>; - phy-reset-post-delay = <100>; status = "okay"; };
@@ -534,7 +529,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; disable-over-current; - dr_mode = "host"; status = "okay"; };
arch/arm/dts/imx6qdl-gw5904.dtsi +8 -19
@@ -55,9 +55,8 @@ led0 = &led0; led1 = &led1; led2 = &led2; - mmc0 = &usdhc3; - usb0 = &usbotg; - usb1 = &usbh1; + usb0 = &usbh1; + usb1 = &usbotg; }; chosen {
@@ -73,8 +72,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb";
@@ -176,8 +173,7 @@ regulator-name = "usb_h1_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; - enable-active-high; + regulator-always-on; }; reg_usb_otg_vbus: regulator-usb-otg-vbus {
@@ -201,9 +197,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; - phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; - phy-reset-duration = <10>; - phy-reset-post-delay = <100>; status = "okay"; fixed-link {
@@ -474,6 +467,11 @@ }; }; + crypto@60 { + compatible = "atmel,atecc508a"; + reg = <0x60>; + }; + imu@6a { compatible = "st,lsm9ds1-imu"; reg = <0x6a>;
@@ -588,14 +586,11 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; disable-over-current; - dr_mode = "otg"; status = "okay"; }; &usbh1 { vbus-supply = <®_usb_h1_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; status = "okay"; };
@@ -756,12 +751,6 @@ >; }; - pinctrl_usbh1: usbh1grp { - fsl,pins = < - MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 - >; - }; - pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
arch/arm/dts/imx6qdl-gw5907.dtsi +2 -7
@@ -13,8 +13,8 @@ led0 = &led0; led1 = &led1; nand = &gpmi; - usb0 = &usbotg; - usb1 = &usbh1; + usb0 = &usbh1; + usb1 = &usbotg; }; chosen {
@@ -23,8 +23,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb";
@@ -131,8 +129,6 @@ pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; - phy-reset-duration = <10>; - phy-reset-post-delay = <100>; status = "okay"; };
@@ -380,7 +376,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; disable-over-current; - dr_mode = "otg"; status = "okay"; };
arch/arm/dts/imx6qdl-gw5910.dtsi +0 -7
@@ -13,7 +13,6 @@ led0 = &led0; led1 = &led1; led2 = &led2; - mmc0 = &usdhc3; }; chosen {
@@ -27,8 +26,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb";
@@ -146,9 +143,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; - phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; - phy-reset-duration = <10>; - phy-reset-post-delay = <100>; status = "okay"; };
@@ -402,7 +396,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; disable-over-current; - dr_mode = "host"; status = "okay"; };
arch/arm/dts/imx6qdl-gw5912.dtsi +3 -19
@@ -13,10 +13,9 @@ led0 = &led0; led1 = &led1; led2 = &led2; - mmc0 = &usdhc3; nand = &gpmi; - usb0 = &usbotg; - usb1 = &usbh1; + usb0 = &usbh1; + usb1 = &usbotg; }; chosen {
@@ -25,8 +24,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb";
@@ -120,8 +117,7 @@ regulator-name = "usb_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>; - enable-active-high; + regulator-always-on; }; };
@@ -142,9 +138,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; - phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; - phy-reset-duration = <10>; - phy-reset-post-delay = <100>; status = "okay"; };
@@ -381,8 +374,6 @@ &usbh1 { vbus-supply = <®_usb_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1>; status = "okay"; };
@@ -432,7 +423,6 @@ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 >; };
@@ -563,12 +553,6 @@ >; }; - pinctrl_usbh1: usbh1grp { - fsl,pins = < - MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 - >; - }; - pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
arch/arm/dts/imx6qdl-gw5913.dtsi +2 -8
@@ -13,8 +13,8 @@ led0 = &led0; led1 = &led1; nand = &gpmi; - usb0 = &usbotg; - usb1 = &usbh1; + usb0 = &usbh1; + usb1 = &usbotg; }; chosen {
@@ -23,8 +23,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb";
@@ -121,9 +119,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; - phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; - phy-reset-duration = <10>; - phy-reset-post-delay = <100>; status = "okay"; };
@@ -346,7 +341,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; disable-over-current; - dr_mode = "host"; status = "okay"; };
arch/arm/dts/imx6qdl-hummingboard2.dtsi +1 -1
@@ -203,7 +203,7 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard2_ecspi2>; - cs-gpios = <&gpio2 26 0>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; status = "okay"; };
arch/arm/dts/imx6qdl-icore.dtsi +17 -2
@@ -150,10 +150,23 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&rmii_clk>; phy-mode = "rmii"; + phy-handle = <ð_phy>; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + eth_phy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; + reset-assert-us = <4000>; + reset-deassert-us = <4000>; + }; + }; }; &gpmi {
@@ -232,6 +245,7 @@ }; &pwm3 { + #pwm-cells = <2>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; status = "okay";
@@ -384,7 +398,7 @@ pinctrl_usbotg: usbotggrp { fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 >; };
@@ -396,6 +410,7 @@ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17070 MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17070 MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17070 + MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0 >; };
arch/arm/dts/imx6qdl-mba6.dtsi +464 -135
424 lines not on this page · raw message
arch/arm/dts/imx6qdl-nitrogen6x.dtsi +678 -55
733 lines not on this page · raw message
arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi +27 -3
Lines of this file are not shown. View the raw message.
arch/arm/dts/imx6qdl-pico.dtsi +215 -11
226 lines not on this page · raw message
arch/arm/dts/imx6qdl-sabreauto.dtsi +86 -33
119 lines not on this page · raw message
arch/arm/dts/imx6qdl-sabrelite.dtsi +634 -240
874 lines not on this page · raw message
arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi +6 -0
Lines of this file are not shown. View the raw message.
arch/arm/dts/imx6qdl-sabresd.dtsi +162 -52
214 lines not on this page · raw message
arch/arm/dts/imx6qdl-tqma6.dtsi +165 -161
326 lines not on this page · raw message
arch/arm/dts/imx6qdl-tqma6a.dtsi +36 -10
46 lines not on this page · raw message
arch/arm/dts/imx6qdl-wandboard-revd1.dtsi +0 -2
Lines of this file are not shown. View the raw message.
arch/arm/dts/imx6qdl-wandboard.dtsi +92 -10
102 lines not on this page · raw message
arch/arm/dts/imx6qdl.dtsi +120 -70
190 lines not on this page · raw message
arch/arm/dts/imx6sl-evk.dts +100 -83
183 lines not on this page · raw message
arch/arm/dts/imx6sl.dtsi +213 -135
348 lines not on this page · raw message
arch/arm/dts/imx6sll-evk.dts +327 -552
879 lines not on this page · raw message
arch/arm/dts/imx6sll.dtsi +211 -234
445 lines not on this page · raw message
arch/arm/dts/imx6sx-sabreauto.dts +476 -147
623 lines not on this page · raw message
arch/arm/dts/imx6sx-sdb.dtsi +49 -7
56 lines not on this page · raw message
arch/arm/dts/imx6sx-softing-vining-2000.dts +21 -29
50 lines not on this page · raw message
arch/arm/dts/imx6sx-udoo-neo.dtsi +74 -0
74 lines not on this page · raw message
arch/arm/dts/imx6sx.dtsi +79 -48
127 lines not on this page · raw message
arch/arm/dts/imx6ul-14x14-evk.dtsi +139 -22
161 lines not on this page · raw message
arch/arm/dts/imx6ul-geam.dts +321 -42
363 lines not on this page · raw message
arch/arm/dts/imx6ul-isiot-emmc.dts +2 -40
42 lines not on this page · raw message
arch/arm/dts/imx6ul-isiot-nand.dts +6 -39
45 lines not on this page · raw message
arch/arm/dts/imx6ul-isiot.dtsi +276 -54
330 lines not on this page · raw message
arch/arm/dts/imx6ul-kontron-n6x1x-s.dtsi +2 -16
Lines of this file are not shown. View the raw message.
arch/arm/dts/imx6ul-kontron-n6x1x-som-common.dtsi +14 -16
Lines of this file are not shown. View the raw message.
arch/arm/dts/imx6ul-opos6ul.dtsi +4 -190
194 lines not on this page · raw message
arch/arm/dts/imx6ul-opos6uldev.dts +8 -379
387 lines not on this page · raw message
arch/arm/dts/imx6ul-phytec-phycore-som.dtsi +18 -3
Lines of this file are not shown. View the raw message.
arch/arm/dts/imx6ul-phytec-segin-ff-rdk-nand.dts +2 -0
Lines of this file are not shown. View the raw message.
arch/arm/dts/imx6ul-phytec-segin.dtsi +2 -44
46 lines not on this page · raw message
arch/arm/dts/imx6ul.dtsi +123 -63
186 lines not on this page · raw message
arch/arm/dts/imx6ull-colibri.dtsi +240 -187
427 lines not on this page · raw message
arch/arm/dts/imx6ull-myir-mys-6ulx-eval.dts +1 -1
Lines of this file are not shown. View the raw message.
arch/arm/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts +1 -0
Lines of this file are not shown. View the raw message.
include/dt-bindings/clock/imx6qdl-clock.h +9 -5
Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Signature · 1 line
2.25.1
Part of the diff is not shown here. View the raw message.
Quoted 9 lines · Fabio Estevam
Hi Marcel,
Quoted 4 lines · Marcel Ziswiler
Messing with all those so late in the game does not seem like too good of an idea. Therefore, I suggest reverting just that one PWM node for now. We may (and really should) properly synchronise all i.MX 6 DTs again in the next cycle.
Quoted 8 lines
I did an attempt to sync the imx6 dts with Linux and generated the attached patch.
It builds the dtb's cleanly.
Boot tested only on a imx6q-sabresd.
I can send it after 2022.07 is released.
We're in rc1, there is still time to get things synced for 2022.07, so just send it.
Quoted 13 lines · Marek Vasut
Quoted 12 lines · Fabio Estevam
Hi Marcel,
Quoted 4 lines · Marcel Ziswiler
Messing with all those so late in the game does not seem like too good of an idea. Therefore, I suggest reverting just that one PWM node for now. We may (and really should) properly synchronise all i.MX 6 DTs again in the next cycle.
I did an attempt to sync the imx6 dts with Linux and generated the attached patch.
Quoted 8 lines
Quoted 5 lines
It builds the dtb's cleanly.
Boot tested only on a imx6q-sabresd.
I can send it after 2022.07 is released.
We're in rc1, there is still time to get things synced for 2022.07, so just send it.
Yes, please! These dts files should be getting re-synced regularly.
Signature · 1 line
Tom