bus: mhi: pci_generic: add Telit FN980 v1 hardware revision
Subsystems (2)
PATCH v2 1/1 bus: mhi: pci_generic: add Telit FN980 v1 hardware revision
Add Telit FN980 v1 hardware revision:
01:00.0 Unassigned class [ff00]: Qualcomm Device [17cb:0306]
Subsystem: Device [1c5d:2000]
Signed-off-by Daniele Palmas <[email protected]>
---
V2: rebased after mhi_pci_id_table reordering
--- drivers/bus/mhi/host/pci_generic.c | 38 ++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+)
drivers/bus/mhi/host/pci_generic.c +38 -0
@@ -446,6 +446,41 @@ static const struct mhi_pci_dev_info mhi_sierra_em919x_info = { .sideband_wake = false, }; +static const struct mhi_channel_config mhi_telit_fn980_hw_v1_channels[] = { +MHI_CHANNEL_CONFIG_UL (14 ,"QMI" ,32 ,0 ), +MHI_CHANNEL_CONFIG_DL (15 ,"QMI" ,32 ,0 ), +MHI_CHANNEL_CONFIG_UL (20 ,"IPCR" ,16 ,0 ), +MHI_CHANNEL_CONFIG_DL_AUTOQUEUE (21 ,"IPCR" ,16 ,0 ), +MHI_CHANNEL_CONFIG_HW_UL (100 ,"IP_HW0" ,128 ,1 ), +MHI_CHANNEL_CONFIG_HW_DL (101 ,"IP_HW0" ,128 ,2 ), +}; + +static struct mhi_event_config mhi_telit_fn980_hw_v1_events[] = { +MHI_EVENT_CONFIG_CTRL (0 ,128 ), +MHI_EVENT_CONFIG_HW_DATA (1 ,1024 ,100 ), +MHI_EVENT_CONFIG_HW_DATA (2 ,2048 ,101 ) +}; + +static struct mhi_controller_config modem_telit_fn980_hw_v1_config = { + .max_channels =128 , + .timeout_ms =20000 , + .num_channels =ARRAY_SIZE (mhi_telit_fn980_hw_v1_channels), + .ch_cfg = mhi_telit_fn980_hw_v1_channels, + .num_events =ARRAY_SIZE (mhi_telit_fn980_hw_v1_events), + .event_cfg = mhi_telit_fn980_hw_v1_events, +}; + +static const struct mhi_pci_dev_info mhi_telit_fn980_hw_v1_info = { + .name ="telit-fn980-hwv1" , + .fw ="qcom/sdx55m/sbl1.mbn" , + .edl ="qcom/sdx55m/edl.mbn" , + .config = &modem_telit_fn980_hw_v1_config, + .bar_num =MHI_PCI_DEFAULT_BAR_NUM , + .dma_data_width =32 , + .mru_default =32768 , + .sideband_wake = false, +}; +/* Keep the list sorted based on the PID. New VID should be added as the last entry */ static const struct pci_device_id mhi_pci_id_table[] = { {PCI_DEVICE (PCI_VENDOR_ID_QCOM ,0x0304 ),
@@ -453,6 +488,9 @@ static const struct pci_device_id mhi_pci_id_table[] = {/* EM919x (sdx55), use the same vid:pid as qcom-sdx55m */ { PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, 0x18d7, 0x0200), .driver_data = (kernel_ulong_t) &mhi_sierra_em919x_info }, +/* Telit FN980 hardware revision v1 */ + { PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, 0x1C5D, 0x2000), + .driver_data = (kernel_ulong_t) &mhi_telit_fn980_hw_v1_info }, { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0306), .driver_data = (kernel_ulong_t) &mhi_qcom_sdx55_info }, { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0308),
Signature · 1 line
2.32.0
Quoted 6 lines · Daniele Palmas
Add Telit FN980 v1 hardware revision:
01:00.0 Unassigned class [ff00]: Qualcomm Device [17cb:0306]
Subsystem: Device [1c5d:2000]Signed-off-by Daniele Palmas <[email protected]>
Reviewed-by Manivannan Sadhasivam <[email protected]>
Thanks,
Mani
Quoted 65 lines
---
V2: rebased aftermhi_pci_id_tablereordering--- drivers/bus/mhi/host/pci_generic.c | 38 ++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+)drivers/bus/mhi/host/pci_generic.c +38
-0@@ -446,6 +446,41 @@ static const struct mhi_pci_dev_info mhi_sierra_em919x_info = { .sideband_wake = false, }; +static const struct mhi_channel_config mhi_telit_fn980_hw_v1_channels[] = { +MHI_CHANNEL_CONFIG_UL (14 ,"QMI" ,32 ,0 ), +MHI_CHANNEL_CONFIG_DL (15 ,"QMI" ,32 ,0 ), +MHI_CHANNEL_CONFIG_UL (20 ,"IPCR" ,16 ,0 ), +MHI_CHANNEL_CONFIG_DL_AUTOQUEUE (21 ,"IPCR" ,16 ,0 ), +MHI_CHANNEL_CONFIG_HW_UL (100 ,"IP_HW0" ,128 ,1 ), +MHI_CHANNEL_CONFIG_HW_DL (101 ,"IP_HW0" ,128 ,2 ), +}; + +static struct mhi_event_config mhi_telit_fn980_hw_v1_events[] = { +MHI_EVENT_CONFIG_CTRL (0 ,128 ), +MHI_EVENT_CONFIG_HW_DATA (1 ,1024 ,100 ), +MHI_EVENT_CONFIG_HW_DATA (2 ,2048 ,101 ) +}; + +static struct mhi_controller_config modem_telit_fn980_hw_v1_config = { + .max_channels =128 , + .timeout_ms =20000 , + .num_channels =ARRAY_SIZE (mhi_telit_fn980_hw_v1_channels), + .ch_cfg = mhi_telit_fn980_hw_v1_channels, + .num_events =ARRAY_SIZE (mhi_telit_fn980_hw_v1_events), + .event_cfg = mhi_telit_fn980_hw_v1_events, +}; + +static const struct mhi_pci_dev_info mhi_telit_fn980_hw_v1_info = { + .name ="telit-fn980-hwv1" , + .fw ="qcom/sdx55m/sbl1.mbn" , + .edl ="qcom/sdx55m/edl.mbn" , + .config = &modem_telit_fn980_hw_v1_config, + .bar_num =MHI_PCI_DEFAULT_BAR_NUM , + .dma_data_width =32 , + .mru_default =32768 , + .sideband_wake = false, +}; +/* Keep the list sorted based on the PID. New VID should be added as the last entry */ static const struct pci_device_id mhi_pci_id_table[] = { {PCI_DEVICE (PCI_VENDOR_ID_QCOM ,0x0304 ),@@ -453,6 +488,9 @@ static const struct pci_device_id mhi_pci_id_table[] = {/* EM919x (sdx55), use the same vid:pid as qcom-sdx55m */ { PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, 0x18d7, 0x0200), .driver_data = (kernel_ulong_t) &mhi_sierra_em919x_info }, +/* Telit FN980 hardware revision v1 */ + { PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, 0x1C5D, 0x2000), + .driver_data = (kernel_ulong_t) &mhi_telit_fn980_hw_v1_info }, { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0306), .driver_data = (kernel_ulong_t) &mhi_qcom_sdx55_info }, { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0308),Signature · 1 line
2.32.0
Quoted 6 lines · Daniele Palmas
Add Telit FN980 v1 hardware revision:
01:00.0 Unassigned class [ff00]: Qualcomm Device [17cb:0306]
Subsystem: Device [1c5d:2000]Signed-off-by Daniele Palmas <[email protected]>
Applied to mhi-next!
Thanks,
Mani
Quoted 65 lines
---
V2: rebased aftermhi_pci_id_tablereordering--- drivers/bus/mhi/host/pci_generic.c | 38 ++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+)drivers/bus/mhi/host/pci_generic.c +38
-0@@ -446,6 +446,41 @@ static const struct mhi_pci_dev_info mhi_sierra_em919x_info = { .sideband_wake = false, }; +static const struct mhi_channel_config mhi_telit_fn980_hw_v1_channels[] = { +MHI_CHANNEL_CONFIG_UL (14 ,"QMI" ,32 ,0 ), +MHI_CHANNEL_CONFIG_DL (15 ,"QMI" ,32 ,0 ), +MHI_CHANNEL_CONFIG_UL (20 ,"IPCR" ,16 ,0 ), +MHI_CHANNEL_CONFIG_DL_AUTOQUEUE (21 ,"IPCR" ,16 ,0 ), +MHI_CHANNEL_CONFIG_HW_UL (100 ,"IP_HW0" ,128 ,1 ), +MHI_CHANNEL_CONFIG_HW_DL (101 ,"IP_HW0" ,128 ,2 ), +}; + +static struct mhi_event_config mhi_telit_fn980_hw_v1_events[] = { +MHI_EVENT_CONFIG_CTRL (0 ,128 ), +MHI_EVENT_CONFIG_HW_DATA (1 ,1024 ,100 ), +MHI_EVENT_CONFIG_HW_DATA (2 ,2048 ,101 ) +}; + +static struct mhi_controller_config modem_telit_fn980_hw_v1_config = { + .max_channels =128 , + .timeout_ms =20000 , + .num_channels =ARRAY_SIZE (mhi_telit_fn980_hw_v1_channels), + .ch_cfg = mhi_telit_fn980_hw_v1_channels, + .num_events =ARRAY_SIZE (mhi_telit_fn980_hw_v1_events), + .event_cfg = mhi_telit_fn980_hw_v1_events, +}; + +static const struct mhi_pci_dev_info mhi_telit_fn980_hw_v1_info = { + .name ="telit-fn980-hwv1" , + .fw ="qcom/sdx55m/sbl1.mbn" , + .edl ="qcom/sdx55m/edl.mbn" , + .config = &modem_telit_fn980_hw_v1_config, + .bar_num =MHI_PCI_DEFAULT_BAR_NUM , + .dma_data_width =32 , + .mru_default =32768 , + .sideband_wake = false, +}; +/* Keep the list sorted based on the PID. New VID should be added as the last entry */ static const struct pci_device_id mhi_pci_id_table[] = { {PCI_DEVICE (PCI_VENDOR_ID_QCOM ,0x0304 ),@@ -453,6 +488,9 @@ static const struct pci_device_id mhi_pci_id_table[] = {/* EM919x (sdx55), use the same vid:pid as qcom-sdx55m */ { PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, 0x18d7, 0x0200), .driver_data = (kernel_ulong_t) &mhi_sierra_em919x_info }, +/* Telit FN980 hardware revision v1 */ + { PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, 0x1C5D, 0x2000), + .driver_data = (kernel_ulong_t) &mhi_telit_fn980_hw_v1_info }, { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0306), .driver_data = (kernel_ulong_t) &mhi_qcom_sdx55_info }, { PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0308),Signature · 1 line
2.32.0