powerpc: dts: p2020: Define MPIC nodes
PATCH 2/4 powerpc: dts: p2020: Define crypto node
In reply to Pali RohárCopy definition of crypto node from upstream Linux kernel P2020 dts files.
Signed-off-by Pali Rohár <[email protected]>
--- arch/powerpc/dts/p2020-post.dtsi | 1 + arch/powerpc/dts/pq3-sec3.1-0.dtsi | 45 ++++++++++++++++++++++++++++++ 2 files changed, 46 insertions(+) create mode 100644 arch/powerpc/dts/pq3-sec3.1-0.dtsi
arch/powerpc/dts/p2020-post.dtsi +1 -0
@@ -74,6 +74,7 @@ /include/ "pq3-etsec1-1.dtsi" /include/ "pq3-etsec1-2.dtsi" +/include/ "pq3-sec3.1-0.dtsi" /include/ "pq3-mpic.dtsi" /include/ "pq3-mpic-timer-B.dtsi" };
arch/powerpc/dts/pq3-sec3.1-0.dtsi new file +45 -0
45 lines not on this page · raw message
Signature · 1 line
2.20.1
PATCH 4/4 powerpc: dts: p2020: Define ecm, memory and guts nodes
In reply to Pali RohárCopy definition of these nodes from upstream Linux kernel P2020 dts files.
Signed-off-by Pali Rohár <[email protected]>
--- arch/powerpc/dts/p2020-post.dtsi | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)
arch/powerpc/dts/p2020-post.dtsi +24 -0
@@ -56,6 +56,24 @@ /include/ "pq3-duart-0.dtsi" /include/ "pq3-gpio-0.dtsi" + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p2020-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,p2020-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <18 2 0 0>; + }; + L2: l2-cache-controller@20000 { compatible = "fsl,p2020-l2-cache-controller"; reg = <0x20000 0x1000>;
@@ -80,6 +98,12 @@ /include/ "pq3-sec3.1-0.dtsi" /include/ "pq3-mpic.dtsi" /include/ "pq3-mpic-timer-B.dtsi" + + global-utilities@e0000 { + compatible = "fsl,p2020-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; }; /* PCIe controller base address 0x8000 */
Signature · 1 line
2.20.1
PATCH 1/4 powerpc: dts: p2020: Define MPIC nodes
Copy definition of MPIC nodes from upstream Linux kernel P2020 dts files.
Signed-off-by Pali Rohár <[email protected]>
--- arch/powerpc/dts/p2020-post.dtsi | 3 + arch/powerpc/dts/pq3-mpic-timer-B.dtsi | 42 ++++++++++++++ arch/powerpc/dts/pq3-mpic.dtsi | 79 ++++++++++++++++++++++++++ 3 files changed, 124 insertions(+) create mode 100644 arch/powerpc/dts/pq3-mpic-timer-B.dtsi create mode 100644 arch/powerpc/dts/pq3-mpic.dtsi
arch/powerpc/dts/p2020-post.dtsi +3 -0
@@ -73,6 +73,9 @@ /include/ "pq3-etsec1-1.dtsi" /include/ "pq3-etsec1-2.dtsi" + +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" }; /* PCIe controller base address 0x8000 */
arch/powerpc/dts/pq3-mpic-timer-B.dtsi new file +42 -0
42 lines not on this page · raw message
arch/powerpc/dts/pq3-mpic.dtsi new file +79 -0
79 lines not on this page · raw message
Signature · 1 line
2.20.1
PATCH 3/4 powerpc: dts: p2020: Define DMA nodes
Copy definition of DMA nodes from upstream Linux kernel P2020 dts files.
Signed-off-by Pali Rohár <[email protected]>
--- arch/powerpc/dts/p2020-post.dtsi | 3 ++ arch/powerpc/dts/pq3-dma-0.dtsi | 66 ++++++++++++++++++++++++++++++++ arch/powerpc/dts/pq3-dma-1.dtsi | 66 ++++++++++++++++++++++++++++++++ 3 files changed, 135 insertions(+) create mode 100644 arch/powerpc/dts/pq3-dma-0.dtsi create mode 100644 arch/powerpc/dts/pq3-dma-1.dtsi
arch/powerpc/dts/p2020-post.dtsi +3 -0
@@ -64,6 +64,9 @@ interrupts = <16 2 0 0>; }; +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-dma-1.dtsi" + /include/ "pq3-etsec1-0.dtsi" /include/ "pq3-etsec1-timer-0.dtsi"
arch/powerpc/dts/pq3-dma-0.dtsi new file +66 -0
66 lines not on this page · raw message
arch/powerpc/dts/pq3-dma-1.dtsi new file +66 -0
66 lines not on this page · raw message
Signature · 1 line
2.20.1