perf intel-pt: Better support for perf record --cpu
Adrian Hunter
reviewerv2 cover perf intel-pt: Better support for perf record --cpu
Hi
Here are V2 patches to support capturing Intel PT sideband events such as mmap, task, context switch, text poke etc, on every CPU even when tracing selected user_requested_cpus. That is, when using the perf record -C or
--cpu option.
This is needed for:
1. text poke: a text poke on any CPU affects all CPUs
2. tracing user space: a user space process can migrate between CPUs so mmap events that happen on a different CPU can be needed to decode a user_requested_cpus CPU.
For example:
Trace on CPU 1:
perf record --kcore -C 1 -e intel_pt// &
Start a task on CPU 0:
taskset 0x1 testprog &
Migrate it to CPU 1:
taskset -p 0x2 <testprog pid>
Stop tracing:
kill %1
Prior to these changes there will be errors decoding testprog in userspace because the comm and mmap events for testprog will not have been captured.
There is quite a bit of preparation:
The first patch is a small Intel PT test for system-wide side band. The test fails before the patches are applied, passed afterwards.
perf intel-pt: Add a test for system-wide side band [new in V1]
The next 5 patches stop auxtrace mixing up mmap idx between evlist and evsel. That is going to matter whenevlist->all_cpus != evlist->user_requested_cpus != evsel->cpus:
libperf evsel: Factor out perf_evsel__ioctl() [now applied] libperf evsel: Add perf_evsel__enable_thread()
perf evlist: Use libperf functions in evlist__enable_event_idx() perf auxtrace: Move evlist__enable_event_idx() to auxtrace.c perf auxtrace: Do not mix up mmap idx
The next 6 patches stop attempts to auxtrace mmap when it is not an auxtrace event e.g. when mmapping the CPUs on which only sideband is captured:
libperf evlist: Remove ->idx() per_cpu parameter
libperf evlist: Move ->idx() into mmap_per_evsel()
libperf evlist: Add evsel as a parameter to ->idx()
perf auxtrace: Record whether an auxtrace mmap is needed perf auxctrace: Add mmap_needed to auxtrace_mmap_params perf auxtrace: Remove auxtrace_mmap_params__set_idx() per_cpu parameter
The next 5 patches switch to setting up dummy event maps before adding the evsel so that the evsel is subject to map propagation, primarily to cause addition of the evsel's CPUs to all_cpus.
perf evlist: Factor out evlist__dummy_event()
perf evlist: Add evlist__add_system_wide_dummy()
perf record: Use evlist__add_system_wide_dummy() in record__config_text_poke() perf intel-pt: Use evlist__add_system_wide_dummy() for switch tracking perf intel-pt: Track sideband system-wide when needed
The remaining patches make more significant changes.
First change from using user_requested_cpus to using all_cpus where necessary:
perf tools: Allow all_cpus to be a superset of user_requested_cpus
Secondly, mmap all per-thread and all per-cpu events:
libperf evlist: Allow mixing per-thread and per-cpu mmaps libperf evlist: Check nr_mmaps is correct [new in V1]
Stop using system_wide flag for uncore because it will not work anymore:
perf stat: Add requires_cpu flag for uncore libperf evsel: Add comments for booleans [new in V1]
Finally change map propagation so that system-wide events retain their cpus and (dummy) threads:
perf tools: Allow system-wide events to keep their own CPUs perf tools: Allow system-wide events to keep their own threads
Changes in V2:
Added some Acked-by: Ian Rogers <[email protected]>
libperf evsel: Add perf_evsel__enable_thread()
Use perf_cpu_map__for_each_cpu()
perf auxtrace: Add mmap_needed to auxtrace_mmap_params
Add documentation comment for mmap_needed
perf auxtrace: Remove auxtrace_mmap_params__set_idx() per_cpu parameter
Fix missing auxtrace_mmap_params__set_idx change
libperf evlist: Check nr_mmaps is correct
Remove unused code
libperf evsel: Add comments for booleans
Amend comments
perf evlist: Add evlist__add_dummy_on_all_cpus()
Rename evlist__add_system_wide -> evlist__add_on_all_cpus Changed patch subject accordingly
perf record: Use evlist__add_dummy_on_all_cpus() in record__config_text_poke()
Rename evlist__add_system_wide -> evlist__add_on_all_cpus Changed patch subject accordingly
perf intel-pt: Use evlist__add_dummy_on_all_cpus() for switch tracking
Rename evlist__add_system_wide -> evlist__add_on_all_cpus Changed patch subject accordingly
Changes in V1:
perf intel-pt: Add a test for system-wide side band
New patch
libperf evsel: Factor out perf_evsel__ioctl()
Dropped because it has been applied.
libperf evsel: Add perf_evsel__enable_thread()
Rename variable i -> idx
perf auxtrace: Do not mix up mmap idx
Rename variable cpu to cpu_map_idx
perf tools: Allow all_cpus to be a superset of user_requested_cpus
Add Acked-by: Ian Rogers <[email protected]>
libperf evlist: Allow mixing per-thread and per-cpu mmaps
Fix perf_evlist__nr_mmaps() calculation
libperf evlist: Check nr_mmaps is correct
New patch
libperf evsel: Add comments for booleans
New patch
perf tools: Allow system-wide events to keep their own CPUs perf tools: Allow system-wide events to keep their own threads
Adrian Hunter (23):
perf intel-pt: Add a test for system-wide side band
libperf evsel: Add perf_evsel__enable_thread()
perf evlist: Use libperf functions in evlist__enable_event_idx() perf auxtrace: Move evlist__enable_event_idx() to auxtrace.c perf auxtrace: Do not mix up mmap idx
libperf evlist: Remove ->idx() per_cpu parameter
libperf evlist: Move ->idx() into mmap_per_evsel()
libperf evlist: Add evsel as a parameter to ->idx()
perf auxtrace: Record whether an auxtrace mmap is needed
perf auxtrace: Add mmap_needed to auxtrace_mmap_params
perf auxtrace: Remove auxtrace_mmap_params__set_idx() per_cpu parameter perf evlist: Factor out evlist__dummy_event()
perf evlist: Add evlist__add_dummy_on_all_cpus()
perf record: Use evlist__add_dummy_on_all_cpus() in record__config_text_poke() perf intel-pt: Use evlist__add_dummy_on_all_cpus() for switch tracking perf intel-pt: Track sideband system-wide when needed
perf tools: Allow all_cpus to be a superset of user_requested_cpus libperf evlist: Allow mixing per-thread and per-cpu mmaps libperf evlist: Check nr_mmaps is correct
perf stat: Add requires_cpu flag for uncore
libperf evsel: Add comments for booleans
perf tools: Allow system-wide events to keep their own CPUs
perf tools: Allow system-wide events to keep their own threads
tools/lib/perf/evlist.c | 80 ++++++++++------------- tools/lib/perf/evsel.c | 15 +++++ tools/lib/perf/include/internal/evlist.h | 3 +- tools/lib/perf/include/internal/evsel.h | 10 +++ tools/lib/perf/include/perf/evsel.h | 1 + tools/perf/arch/arm/util/cs-etm.c | 1 + tools/perf/arch/arm64/util/arm-spe.c | 1 + tools/perf/arch/s390/util/auxtrace.c | 1 + tools/perf/arch/x86/util/intel-bts.c | 1 + tools/perf/arch/x86/util/intel-pt.c | 32 ++++------ tools/perf/builtin-record.c | 39 +++++------- tools/perf/builtin-stat.c | 5 +- tools/perf/tests/shell/test_intel_pt.sh | 71 +++++++++++++++++++++ tools/perf/util/auxtrace.c | 31 +++++++-- tools/perf/util/auxtrace.h | 10 +-- tools/perf/util/evlist.c | 106 +++++++++++++++---------------- tools/perf/util/evlist.h | 7 +- tools/perf/util/evsel.c | 1 + tools/perf/util/evsel.h | 1 + tools/perf/util/mmap.c | 4 +- tools/perf/util/parse-events.c | 2 +- 21 files changed, 261 insertions(+), 161 deletions(-) create mode 100755 tools/perf/tests/shell/test_intel_pt.sh
Regards
Adrian
Adrian Hunter
reviewerPATCH v2 1/23 perf intel-pt: Add a test for system-wide side band
Add a test for system-wide side band even when tracing selected CPUs.
--- tools/perf/tests/shell/test_intel_pt.sh | 71 +++++++++++++++++++++++++ 1 file changed, 71 insertions(+) create mode 100755 tools/perf/tests/shell/test_intel_pt.sh
tools/perf/tests/shell/test_intel_pt.sh new file +71 -0
@@ -0,0 +1,71 @@ +#!/bin/sh +# Miscellaneous Intel PT testing +# SPDX-License-Identifier: GPL-2.0 + +set -e + +# Skip if no Intel PT +perf list | grep -q 'intel_pt//' || exit 2 + +skip_cnt=0 +ok_cnt=0 +err_cnt=0 + +tmpfile=`mktemp` +perfdatafile=`mktemp` + +can_cpu_wide() +{ + perf record -o ${tmpfile} -B -N --no-bpf-event -e dummy:u -C $1 true 2>&1 >/dev/null || return 2 + return 0 +} + +test_system_wide_side_band() +{ + # Need CPU 0 and CPU 1 + can_cpu_wide 0 || return $? + can_cpu_wide 1 || return $? + + # Record on CPU 0 a task running on CPU 1 + perf record -B -N --no-bpf-event -o ${perfdatafile} -e intel_pt//u -C 0 -- taskset --cpu-list 1 uname + + # Should get MMAP events from CPU 1 because they can be needed to decode + mmap_cnt=`perf script -i ${perfdatafile} --no-itrace --show-mmap-events -C 1 2>/dev/null | grep MMAP | wc -l` + + if [ ${mmap_cnt} -gt 0 ] ; then + return 0 + fi + + echo "Failed to record MMAP events on CPU 1 when tracing CPU 0" + return 1 +} + +count_result() +{ + if [ $1 -eq 2 ] ; then + skip_cnt=`expr ${skip_cnt} \+ 1` + return + fi + if [ $1 -eq 0 ] ; then + ok_cnt=`expr ${ok_cnt} \+ 1` + return + fi + err_cnt=`expr ${err_cnt} \+ 1` +} + +test_system_wide_side_band + +count_result $? + +rm -f ${tmpfile} +rm -f ${perfdatafile} + +if [ ${err_cnt} -gt 0 ] ; then + exit 1 +fi + +if [ ${ok_cnt} -gt 0 ] ; then + exit 0 +fi + +exit 2
Signature · 1 line
2.25.1
Adrian Hunter
reviewerPATCH v2 2/23 libperf evsel: Add perf_evsel__enable_thread()
In reply to Adrian HunterAdd perf_evsel__enable_thread() as a counterpart to perf_evsel__enable_cpu(), to enable all events for a thread.
--- tools/lib/perf/evsel.c | 15 +++++++++++++++ tools/lib/perf/include/perf/evsel.h | 1 + 2 files changed, 16 insertions(+)
tools/lib/perf/evsel.c +15 -0
@@ -360,6 +360,21 @@ int perf_evsel__enable_cpu(struct perf_evsel *evsel, int cpu_map_idx)return perf_evsel__run_ioctl (evsel,PERF_EVENT_IOC_ENABLE ,NULL , cpu_map_idx); } +int perf_evsel__enable_thread (struct perf_evsel *evsel,int thread) +{ +struct perf_cpu cpu__maybe_unused ; +int idx; +int err; + +perf_cpu_map__for_each_cpu (cpu, idx, evsel->cpus) { + err =perf_evsel__ioctl (evsel,PERF_EVENT_IOC_ENABLE ,NULL , idx, thread); +if (err) +return err; + } + +return 0 ; +} +int perf_evsel__enable (struct perf_evsel *evsel) {int i;
tools/lib/perf/include/perf/evsel.h +1 -0
@@ -36,6 +36,7 @@ LIBPERF_API int perf_evsel__read(struct perf_evsel *evsel, int cpu_map_idx, int struct perf_counts_values *count); LIBPERF_API int perf_evsel__enable(struct perf_evsel *evsel); LIBPERF_API int perf_evsel__enable_cpu(struct perf_evsel *evsel, int cpu_map_idx); +LIBPERF_API int perf_evsel__enable_thread(struct perf_evsel *evsel, int thread); LIBPERF_API int perf_evsel__disable(struct perf_evsel *evsel); LIBPERF_API int perf_evsel__disable_cpu(struct perf_evsel *evsel, int cpu_map_idx); LIBPERF_API struct perf_cpu_map *perf_evsel__cpus(struct perf_evsel *evsel);
Signature · 1 line
2.25.1
Adrian Hunter
reviewerPATCH v2 3/23 perf evlist: Use libperf functions in evlist__enable_event_idx()
In reply to Adrian Hunterevlist__enable_event_idx() is used only for auxtrace events which are never system_wide. Simplify by using libperf enable event functions.
--- tools/perf/util/evlist.c | 44 ++-------------------------------------- 1 file changed, 2 insertions(+), 42 deletions(-)
tools/perf/util/evlist.c +2 -42
@@ -334,14 +334,6 @@ int evlist__add_newtp(struct evlist *evlist, const char *sys, const char *name,return 0 ; } -static int evlist__nr_threads (struct evlist *evlist,struct evsel *evsel) -{ -if (evsel->core.system_wide) -return 1 ; -else -return perf_thread_map__nr (evlist->core.threads); -} -struct evlist_cpu_iterator evlist__cpu_begin (struct evlist *evlist,struct affinity *affinity) {struct evlist_cpu_iterator itr = {
@@ -546,46 +538,14 @@ void evlist__toggle_enable(struct evlist *evlist) (evlist->enabled ? evlist__disable : evlist__enable)(evlist); } -static int evlist__enable_event_cpu (struct evlist *evlist,struct evsel *evsel,int cpu) -{ -int thread; -int nr_threads =evlist__nr_threads (evlist, evsel); - -if (!evsel->core.fd) -return -EINVAL ; - -for (thread =0 ; thread < nr_threads; thread++) { -int err =ioctl (FD (evsel, cpu, thread),PERF_EVENT_IOC_ENABLE ,0 ); -if (err) -return err; - } -return 0 ; -} - -static int evlist__enable_event_thread (struct evlist *evlist,struct evsel *evsel,int thread) -{ -int cpu; -int nr_cpus =perf_cpu_map__nr (evlist->core.user_requested_cpus); - -if (!evsel->core.fd) -return -EINVAL ; - -for (cpu =0 ; cpu < nr_cpus; cpu++) { -int err =ioctl (FD (evsel, cpu, thread),PERF_EVENT_IOC_ENABLE ,0 ); -if (err) -return err; - } -return 0 ; -} -int evlist__enable_event_idx (struct evlist *evlist,struct evsel *evsel,int idx) {bool per_cpu_mmaps = !perf_cpu_map__empty (evlist->core.user_requested_cpus);if (per_cpu_mmaps) -return evlist__enable_event_cpu (evlist, evsel, idx); +return perf_evsel__enable_cpu (&evsel->core, idx); -return evlist__enable_event_thread (evlist, evsel, idx); +return perf_evsel__enable_thread (&evsel->core, idx); }int evlist__add_pollfd (struct evlist *evlist,int fd)
Signature · 1 line
2.25.1
Adrian Hunter
reviewerPATCH v2 4/23 perf auxtrace: Move evlist__enable_event_idx() to auxtrace.c
In reply to Adrian Hunterevlist__enable_event_idx() is used only by auxtrace. Move it to auxtrace.c in preparation for making it even more auxtrace specific.
--- tools/perf/util/auxtrace.c | 10 ++++++++++ tools/perf/util/evlist.c | 10 ---------- tools/perf/util/evlist.h | 2 -- 3 files changed, 10 insertions(+), 12 deletions(-)
tools/perf/util/auxtrace.c +10 -0
@@ -636,6 +636,16 @@ int auxtrace_parse_snapshot_options(struct auxtrace_record *itr,return -EINVAL ; } +static int evlist__enable_event_idx (struct evlist *evlist,struct evsel *evsel,int idx) +{ +bool per_cpu_mmaps = !perf_cpu_map__empty (evlist->core.user_requested_cpus); + +if (per_cpu_mmaps) +return perf_evsel__enable_cpu (&evsel->core, idx); + +return perf_evsel__enable_thread (&evsel->core, idx); +} +int auxtrace_record__read_finish (struct auxtrace_record *itr,int idx) {struct evsel *evsel;
tools/perf/util/evlist.c +0 -10
@@ -538,16 +538,6 @@ void evlist__toggle_enable(struct evlist *evlist) (evlist->enabled ? evlist__disable : evlist__enable)(evlist); } -int evlist__enable_event_idx (struct evlist *evlist,struct evsel *evsel,int idx) -{ -bool per_cpu_mmaps = !perf_cpu_map__empty (evlist->core.user_requested_cpus); - -if (per_cpu_mmaps) -return perf_evsel__enable_cpu (&evsel->core, idx); - -return perf_evsel__enable_thread (&evsel->core, idx); -} -int evlist__add_pollfd (struct evlist *evlist,int fd) {return perf_evlist__add_pollfd (&evlist->core, fd,NULL ,POLLIN , fdarray_flag__default);
tools/perf/util/evlist.h +0 -2
@@ -196,8 +196,6 @@ void evlist__toggle_enable(struct evlist *evlist);void evlist__disable_evsel (struct evlist *evlist,char *evsel_name);void evlist__enable_evsel (struct evlist *evlist,char *evsel_name); -int evlist__enable_event_idx (struct evlist *evlist,struct evsel *evsel,int idx); -void evlist__set_selected (struct evlist *evlist,struct evsel *evsel);int evlist__create_maps (struct evlist *evlist,struct target *target);
Signature · 1 line
2.25.1
Adrian Hunter
reviewerPATCH v2 5/23 perf auxtrace: Do not mix up mmap idx
In reply to Adrian HunterThe idx is with respect to evlist not evsel. That hasn't mattered because they are the same at present. Prepare for that not being the case, which it won't be when sideband tracking events are allowed on all CPUs even when auxtrace is limited to selected CPUs.
--- tools/perf/util/auxtrace.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
tools/perf/util/auxtrace.c +8 -2
@@ -640,8 +640,14 @@ static int evlist__enable_event_idx(struct evlist *evlist, struct evsel *evsel, {bool per_cpu_mmaps = !perf_cpu_map__empty (evlist->core.user_requested_cpus); -if (per_cpu_mmaps) -return perf_evsel__enable_cpu (&evsel->core, idx); +if (per_cpu_mmaps) { +struct perf_cpu evlist_cpu =perf_cpu_map__cpu (evlist->core.all_cpus, idx); +int cpu_map_idx =perf_cpu_map__idx (evsel->core.cpus, evlist_cpu); + +if (cpu_map_idx ==-1 ) +return -EINVAL ; +return perf_evsel__enable_cpu (&evsel->core, cpu_map_idx); + }return perf_evsel__enable_thread (&evsel->core, idx); }
Signature · 1 line
2.25.1
Adrian Hunter
reviewerPATCH v2 6/23 libperf evlist: Remove ->idx() per_cpu parameter
In reply to Adrian HunterRemove ->idx() per_cpu parameter because it isn't needed.
--- tools/lib/perf/evlist.c | 4 ++-- tools/lib/perf/include/internal/evlist.h | 2 +- tools/perf/util/evlist.c | 3 ++- 3 files changed, 5 insertions(+), 4 deletions(-)
tools/lib/perf/evlist.c +2 -2
@@ -521,7 +521,7 @@ mmap_per_thread(struct perf_evlist *evlist, struct perf_evlist_mmap_ops *ops,int output_overwrite =-1 ;if (ops->idx) - ops->idx (evlist, mp, thread, false); + ops->idx (evlist, mp, thread);if (mmap_per_evsel (evlist, ops, thread, mp,0 , thread, &output, &output_overwrite))
@@ -548,7 +548,7 @@ mmap_per_cpu(struct perf_evlist *evlist, struct perf_evlist_mmap_ops *ops,int output_overwrite =-1 ;if (ops->idx) - ops->idx (evlist, mp, cpu, true); + ops->idx (evlist, mp, cpu);for (thread =0 ; thread < nr_threads; thread++) { if (mmap_per_evsel(evlist, ops, cpu, mp, cpu,
tools/lib/perf/include/internal/evlist.h +1 -1
@@ -38,7 +38,7 @@ struct perf_evlist { };typedef void -(*perf_evlist_mmap__cb_idx_t )(struct perf_evlist *,struct perf_mmap_param *,int ,bool ); +(*perf_evlist_mmap__cb_idx_t )(struct perf_evlist *,struct perf_mmap_param *,int );typedef struct perf_mmap * (*perf_evlist_mmap__cb_get_t )(struct perf_evlist *,bool ,int ); typedef int
tools/perf/util/evlist.c +2 -1
@@ -748,10 +748,11 @@ static struct mmap *evlist__alloc_mmap(struct evlist *evlist,static void perf_evlist__mmap_cb_idx (struct perf_evlist *_evlist,struct perf_mmap_param *_mp, -int idx,bool per_cpu) +int idx) { struct evlist *evlist = container_of(_evlist, struct evlist, core); struct mmap_params *mp = container_of(_mp, struct mmap_params, core); +bool per_cpu = !perf_cpu_map__empty (_evlist->user_requested_cpus);auxtrace_mmap_params__set_idx (&mp->auxtrace_mp, evlist, idx, per_cpu); }
Signature · 1 line
2.25.1
Adrian Hunter
reviewerPATCH v2 7/23 libperf evlist: Move ->idx() into mmap_per_evsel()
In reply to Adrian HunterMove ->idx() into mmap_per_evsel() in preparation for adding evsel as a parameter.
--- tools/lib/perf/evlist.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-)
tools/lib/perf/evlist.c +3 -6
@@ -478,6 +478,9 @@ mmap_per_evsel(struct perf_evlist *evlist, struct perf_evlist_mmap_ops *ops,*/ refcount_set (&map->refcnt,2 ); +if (ops->idx) + ops->idx (evlist, mp, idx); +if (ops->mmap (map, mp, *output, evlist_cpu) <0 )return -1 ;
@@ -520,9 +523,6 @@ mmap_per_thread(struct perf_evlist *evlist, struct perf_evlist_mmap_ops *ops,int output =-1 ;int output_overwrite =-1 ; -if (ops->idx) - ops->idx (evlist, mp, thread); -if (mmap_per_evsel (evlist, ops, thread, mp,0 , thread, &output, &output_overwrite)) goto out_unmap;
@@ -547,9 +547,6 @@ mmap_per_cpu(struct perf_evlist *evlist, struct perf_evlist_mmap_ops *ops,int output =-1 ;int output_overwrite =-1 ; -if (ops->idx) - ops->idx (evlist, mp, cpu); -for (thread =0 ; thread < nr_threads; thread++) {if (mmap_per_evsel (evlist, ops, cpu, mp, cpu, thread, &output, &output_overwrite))
Signature · 1 line
2.25.1
Adrian Hunter
reviewerPATCH v2 8/23 libperf evlist: Add evsel as a parameter to ->idx()
In reply to Adrian HunterAdd evsel as a parameter to ->idx() in preparation for correctly determining whether an auxtrace mmap is needed.
--- tools/lib/perf/evlist.c | 2 +- tools/lib/perf/include/internal/evlist.h | 3 ++- tools/perf/util/evlist.c | 1 + 3 files changed, 4 insertions(+), 2 deletions(-)
tools/lib/perf/evlist.c +1 -1
@@ -479,7 +479,7 @@ mmap_per_evsel(struct perf_evlist *evlist, struct perf_evlist_mmap_ops *ops,refcount_set (&map->refcnt,2 );if (ops->idx) - ops->idx (evlist, mp, idx); + ops->idx (evlist, evsel, mp, idx);if (ops->mmap (map, mp, *output, evlist_cpu) <0 )return -1 ;
tools/lib/perf/include/internal/evlist.h +2 -1
@@ -38,7 +38,8 @@ struct perf_evlist { };typedef void -(*perf_evlist_mmap__cb_idx_t )(struct perf_evlist *,struct perf_mmap_param *,int ); +(*perf_evlist_mmap__cb_idx_t )(struct perf_evlist *,struct perf_evsel *, +struct perf_mmap_param *,int );typedef struct perf_mmap * (*perf_evlist_mmap__cb_get_t )(struct perf_evlist *,bool ,int ); typedef int
tools/perf/util/evlist.c +1 -0
@@ -747,6 +747,7 @@ static struct mmap *evlist__alloc_mmap(struct evlist *evlist,static void perf_evlist__mmap_cb_idx (struct perf_evlist *_evlist, +struct perf_evsel *_evsel__maybe_unused ,struct perf_mmap_param *_mp,int idx) {
Signature · 1 line
2.25.1
Adrian Hunter
reviewerPATCH v2 9/23 perf auxtrace: Record whether an auxtrace mmap is needed
In reply to Adrian HunterAdd a flag needs_auxtrace_mmap to record whether an auxtrace mmap is needed, in preparation for correctly determining whether or not an auxtrace mmap is needed.
--- tools/perf/arch/arm/util/cs-etm.c | 1 + tools/perf/arch/arm64/util/arm-spe.c | 1 + tools/perf/arch/s390/util/auxtrace.c | 1 + tools/perf/arch/x86/util/intel-bts.c | 1 + tools/perf/arch/x86/util/intel-pt.c | 1 + tools/perf/util/evsel.h | 1 + 6 files changed, 6 insertions(+)
tools/perf/arch/arm/util/cs-etm.c +1 -0
@@ -319,6 +319,7 @@ static int cs_etm_recording_options(struct auxtrace_record *itr, } evsel->core.attr.freq =0 ; evsel->core.attr.sample_period =1 ; + evsel->needs_auxtrace_mmap = true; cs_etm_evsel = evsel; opts->full_auxtrace = true; }
tools/perf/arch/arm64/util/arm-spe.c +1 -0
@@ -160,6 +160,7 @@ static int arm_spe_recording_options(struct auxtrace_record *itr, } evsel->core.attr.freq =0 ; evsel->core.attr.sample_period = arm_spe_pmu->default_config->sample_period; + evsel->needs_auxtrace_mmap = true; arm_spe_evsel = evsel; opts->full_auxtrace = true; }
tools/perf/arch/s390/util/auxtrace.c +1 -0
@@ -98,6 +98,7 @@ struct auxtrace_record *auxtrace_record__init(struct evlist *evlist,evlist__for_each_entry (evlist, pos) {if (pos->core.attr.config ==PERF_EVENT_CPUM_SF_DIAG ) { diagnose =1 ; + pos->needs_auxtrace_mmap = true;break ; } }
tools/perf/arch/x86/util/intel-bts.c +1 -0
@@ -129,6 +129,7 @@ static int intel_bts_recording_options(struct auxtrace_record *itr, } evsel->core.attr.freq =0 ; evsel->core.attr.sample_period =1 ; + evsel->needs_auxtrace_mmap = true; intel_bts_evsel = evsel; opts->full_auxtrace = true; }
tools/perf/arch/x86/util/intel-pt.c +1 -0
@@ -649,6 +649,7 @@ static int intel_pt_recording_options(struct auxtrace_record *itr, evsel->core.attr.freq =0 ; evsel->core.attr.sample_period =1 ; evsel->no_aux_samples = true; + evsel->needs_auxtrace_mmap = true; intel_pt_evsel = evsel; opts->full_auxtrace = true; }
tools/perf/util/evsel.h +1 -0
@@ -124,6 +124,7 @@ struct evsel {bool merged_stat;bool reset_group;bool errored; +bool needs_auxtrace_mmap;struct hashmap *per_pkg_mask;int err;struct {
Signature · 1 line
2.25.1
Adrian Hunter
reviewerPATCH v2 10/23 perf auxtrace: Add mmap_needed to auxtrace_mmap_params
In reply to Adrian HunterAdd mmap_needed to auxtrace_mmap_params.
Currently an auxtrace mmap is always attempted even if the event is not an auxtrace event. That works because, when AUX area tracing, there is always an auxtrace event first for every mmap. Prepare for that not being the case, which it won't be when sideband tracking events are allowed on all CPUs even when auxtrace is limited to selected CPUs.
--- tools/perf/util/auxtrace.c | 10 ++++++++-- tools/perf/util/auxtrace.h | 8 ++++++-- tools/perf/util/evlist.c | 5 +++-- tools/perf/util/mmap.c | 1 + 4 files changed, 18 insertions(+), 6 deletions(-)
tools/perf/util/auxtrace.c +8 -2
@@ -125,7 +125,7 @@ int auxtrace_mmap__mmap(struct auxtrace_mmap *mm, mm->tid = mp->tid; mm->cpu = mp->cpu.cpu; -if (!mp->len) { +if (!mp->len || !mp->mmap_needed) { mm->base =NULL ;return 0 ; }
@@ -168,9 +168,15 @@ void auxtrace_mmap_params__init(struct auxtrace_mmap_params *mp, }void auxtrace_mmap_params__set_idx (struct auxtrace_mmap_params *mp, -struct evlist *evlist,int idx, +struct evlist *evlist, +struct evsel *evsel,int idx,bool per_cpu) { + mp->mmap_needed = evsel->needs_auxtrace_mmap; + +if (!mp->mmap_needed) +return ; + mp->idx = idx;if (per_cpu) {
tools/perf/util/auxtrace.h +6 -2
@@ -344,6 +344,7 @@ struct auxtrace_mmap {* @idx: index of this mmap * @tid: tid for a per-thread mmap (also set if there is only 1 tid on a per-cpu * mmap) otherwise %0 +* @mmap_needed: set to %false for non-auxtrace events * @cpu: cpu number for a per-cpu mmap otherwise %-1 */ struct auxtrace_mmap_params {
@@ -353,6 +354,7 @@ struct auxtrace_mmap_params {int prot;int idx;pid_t tid; +bool mmap_needed;struct perf_cpu cpu; };
@@ -490,7 +492,8 @@ void auxtrace_mmap_params__init(struct auxtrace_mmap_params *mp,unsigned int auxtrace_pages, bool auxtrace_overwrite);void auxtrace_mmap_params__set_idx (struct auxtrace_mmap_params *mp, -struct evlist *evlist,int idx, +struct evlist *evlist, +struct evsel *evsel,int idx,bool per_cpu); typedef int (*process_auxtrace_t)(struct perf_tool *tool,
@@ -863,7 +866,8 @@ void auxtrace_mmap_params__init(struct auxtrace_mmap_params *mp,unsigned int auxtrace_pages, bool auxtrace_overwrite);void auxtrace_mmap_params__set_idx (struct auxtrace_mmap_params *mp, -struct evlist *evlist,int idx, +struct evlist *evlist, +struct evsel *evsel,int idx,bool per_cpu);#define ITRACE_HELP ""
tools/perf/util/evlist.c +3 -2
@@ -747,15 +747,16 @@ static struct mmap *evlist__alloc_mmap(struct evlist *evlist,static void perf_evlist__mmap_cb_idx (struct perf_evlist *_evlist, -struct perf_evsel *_evsel__maybe_unused , +struct perf_evsel *_evsel,struct perf_mmap_param *_mp,int idx) { struct evlist *evlist = container_of(_evlist, struct evlist, core); struct mmap_params *mp = container_of(_mp, struct mmap_params, core);bool per_cpu = !perf_cpu_map__empty (_evlist->user_requested_cpus); + struct evsel *evsel = container_of(_evsel, struct evsel, core); -auxtrace_mmap_params__set_idx (&mp->auxtrace_mp, evlist, idx, per_cpu); +auxtrace_mmap_params__set_idx (&mp->auxtrace_mp, evlist, evsel, idx, per_cpu); } static struct perf_mmap*
tools/perf/util/mmap.c +1 -0
@@ -62,6 +62,7 @@ void __weak auxtrace_mmap_params__init(struct auxtrace_mmap_params *mp __maybe_uvoid __weak auxtrace_mmap_params__set_idx (struct auxtrace_mmap_params *mp__maybe_unused ,struct evlist *evlist__maybe_unused , +struct evsel *evsel__maybe_unused ,int idx__maybe_unused ,bool per_cpu__maybe_unused ) {
Signature · 1 line
2.25.1
Adrian Hunter
reviewerPATCH v2 12/23 perf evlist: Factor out evlist__dummy_event()
In reply to Adrian HunterFactor out evlist__dummy_event() so it can be reused.
--- tools/perf/util/evlist.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
tools/perf/util/evlist.c +8 -2
@@ -242,14 +242,20 @@ int __evlist__add_default(struct evlist *evlist, bool precise)return 0 ; } -int evlist__add_dummy (struct evlist *evlist) +static struct evsel *evlist__dummy_event (struct evlist *evlist) {struct perf_event_attr attr = { .type =PERF_TYPE_SOFTWARE , .config =PERF_COUNT_SW_DUMMY , .size =sizeof (attr),/* to capture ABI version */ }; -struct evsel *evsel =evsel__new_idx (&attr, evlist->core.nr_entries); + +return evsel__new_idx (&attr, evlist->core.nr_entries); +} + +int evlist__add_dummy (struct evlist *evlist) +{ +struct evsel *evsel =evlist__dummy_event (evlist);if (evsel ==NULL )return -ENOMEM ;
Signature · 1 line
2.25.1
Adrian Hunter
reviewerPATCH v2 11/23 perf auxtrace: Remove auxtrace_mmap_params__set_idx() per_cpu parameter
In reply to Adrian HunterRemove auxtrace_mmap_params__set_idx() per_cpu parameter because it isn't needed.
--- tools/perf/util/auxtrace.c | 5 +++-- tools/perf/util/auxtrace.h | 6 ++---- tools/perf/util/evlist.c | 3 +-- tools/perf/util/mmap.c | 3 +-- 4 files changed, 7 insertions(+), 10 deletions(-)
tools/perf/util/auxtrace.c +3 -2
@@ -169,9 +169,10 @@ void auxtrace_mmap_params__init(struct auxtrace_mmap_params *mp,void auxtrace_mmap_params__set_idx (struct auxtrace_mmap_params *mp,struct evlist *evlist, -struct evsel *evsel,int idx, -bool per_cpu) +struct evsel *evsel,int idx) { +bool per_cpu = !perf_cpu_map__empty (evlist->core.user_requested_cpus); + mp->mmap_needed = evsel->needs_auxtrace_mmap;if (!mp->mmap_needed)
tools/perf/util/auxtrace.h +2 -4
@@ -493,8 +493,7 @@ void auxtrace_mmap_params__init(struct auxtrace_mmap_params *mp, bool auxtrace_overwrite);void auxtrace_mmap_params__set_idx (struct auxtrace_mmap_params *mp,struct evlist *evlist, -struct evsel *evsel,int idx, -bool per_cpu); +struct evsel *evsel,int idx); typedef int (*process_auxtrace_t)(struct perf_tool *tool, struct mmap *map,
@@ -867,8 +866,7 @@ void auxtrace_mmap_params__init(struct auxtrace_mmap_params *mp, bool auxtrace_overwrite);void auxtrace_mmap_params__set_idx (struct auxtrace_mmap_params *mp,struct evlist *evlist, -struct evsel *evsel,int idx, -bool per_cpu); +struct evsel *evsel,int idx);#define ITRACE_HELP ""
tools/perf/util/evlist.c +1 -2
@@ -753,10 +753,9 @@ perf_evlist__mmap_cb_idx(struct perf_evlist *_evlist, { struct evlist *evlist = container_of(_evlist, struct evlist, core); struct mmap_params *mp = container_of(_mp, struct mmap_params, core); -bool per_cpu = !perf_cpu_map__empty (_evlist->user_requested_cpus); struct evsel *evsel = container_of(_evsel, struct evsel, core); -auxtrace_mmap_params__set_idx (&mp->auxtrace_mp, evlist, evsel, idx, per_cpu); +auxtrace_mmap_params__set_idx (&mp->auxtrace_mp, evlist, evsel, idx); } static struct perf_mmap*
tools/perf/util/mmap.c +1 -2
@@ -63,8 +63,7 @@ void __weak auxtrace_mmap_params__init(struct auxtrace_mmap_params *mp __maybe_uvoid __weak auxtrace_mmap_params__set_idx (struct auxtrace_mmap_params *mp__maybe_unused ,struct evlist *evlist__maybe_unused ,struct evsel *evsel__maybe_unused , -int idx__maybe_unused , -bool per_cpu__maybe_unused ) +int idx__maybe_unused ) { }
Signature · 1 line
2.25.1
Adrian Hunter
reviewerPATCH v2 13/23 perf evlist: Add evlist__add_dummy_on_all_cpus()
In reply to Adrian HunterAdd evlist__add_dummy_on_all_cpus() to enable creating a system-wide dummy event that sets up the system-wide maps before map propagation.
For convenience, add evlist__add_aux_dummy() so that the logic can be used whether or not the event needs to be system-wide.
--- tools/perf/util/evlist.c | 40 ++++++++++++++++++++++++++++++++++++++++ tools/perf/util/evlist.h | 5 +++++ 2 files changed, 45 insertions(+)
tools/perf/util/evlist.c +40 -0
@@ -264,6 +264,46 @@ int evlist__add_dummy(struct evlist *evlist)return 0 ; } +static void evlist__add_on_all_cpus (struct evlist *evlist,struct evsel *evsel) +{ + evsel->core.system_wide = true; + +/* All CPUs */ +perf_cpu_map__put (evsel->core.own_cpus); + evsel->core.own_cpus =perf_cpu_map__new (NULL ); +perf_cpu_map__put (evsel->core.cpus); + evsel->core.cpus =perf_cpu_map__get (evsel->core.own_cpus); + +/* No threads */ +perf_thread_map__put (evsel->core.threads); + evsel->core.threads =perf_thread_map__new_dummy (); + +evlist__add (evlist, evsel); +} + +struct evsel *evlist__add_aux_dummy (struct evlist *evlist,bool system_wide) +{ +struct evsel *evsel =evlist__dummy_event (evlist); + +if (!evsel) +return NULL ; + + evsel->core.attr.exclude_kernel =1 ; + evsel->core.attr.exclude_guest =1 ; + evsel->core.attr.exclude_hv =1 ; + evsel->core.attr.freq =0 ; + evsel->core.attr.sample_period =1 ; + evsel->no_aux_samples = true; + evsel->name =strdup ("dummy:u" ); + +if (system_wide) +evlist__add_on_all_cpus (evlist, evsel); +else +evlist__add (evlist, evsel); + +return evsel; +} +static int evlist__add_attrs (struct evlist *evlist,struct perf_event_attr *attrs,size_t nr_attrs) {struct evsel *evsel, *n;
tools/perf/util/evlist.h +5 -0
@@ -114,6 +114,11 @@ int arch_evlist__add_default_attrs(struct evlist *evlist);struct evsel *arch_evlist__leader (struct list_head *list);int evlist__add_dummy (struct evlist *evlist); +struct evsel *evlist__add_aux_dummy (struct evlist *evlist,bool system_wide); +static inline struct evsel *evlist__add_dummy_on_all_cpus (struct evlist *evlist) +{ +return evlist__add_aux_dummy (evlist, true); +}int evlist__add_sb_event (struct evlist *evlist,struct perf_event_attr *attr,evsel__sb_cb_t cb,void *data);
Signature · 1 line
2.25.1
Adrian Hunter
reviewerPATCH v2 14/23 perf record: Use evlist__add_dummy_on_all_cpus() in record__config_text_poke()
In reply to Adrian HunterUse evlist__add_dummy_on_all_cpus() in record__config_text_poke() in preparation for allowing system-wide events on all CPUs while the user requested events are on only user requested CPUs.
--- tools/perf/builtin-record.c | 21 +++------------------ 1 file changed, 3 insertions(+), 18 deletions(-)
tools/perf/builtin-record.c +3 -18
@@ -869,7 +869,6 @@ static int record__auxtrace_init(struct record *rec __maybe_unused)static int record__config_text_poke (struct evlist *evlist) {struct evsel *evsel; -int err;/* Nothing to do if text poke is already configured */ evlist__for_each_entry (evlist, evsel) {
@@ -877,27 +876,13 @@ static int record__config_text_poke(struct evlist *evlist)return 0 ; } - err =parse_events (evlist,"dummy:u" ,NULL ); -if (err) -return err; - - evsel =evlist__last (evlist); + evsel =evlist__add_dummy_on_all_cpus (evlist); +if (!evsel) +return -ENOMEM ; - evsel->core.attr.freq =0 ; - evsel->core.attr.sample_period =1 ; evsel->core.attr.text_poke =1 ; evsel->core.attr.ksymbol =1 ; - - evsel->core.system_wide = true; - evsel->no_aux_samples = true; evsel->immediate = true; - -/* Text poke must be collected on all CPUs */ -perf_cpu_map__put (evsel->core.own_cpus); - evsel->core.own_cpus =perf_cpu_map__new (NULL ); -perf_cpu_map__put (evsel->core.cpus); - evsel->core.cpus =perf_cpu_map__get (evsel->core.own_cpus); -evsel__set_sample_bit (evsel,TIME );return 0 ;
Signature · 1 line
2.25.1
Adrian Hunter
reviewerPATCH v2 15/23 perf intel-pt: Use evlist__add_dummy_on_all_cpus() for switch tracking
In reply to Adrian HunterUse evlist__add_dummy_on_all_cpus() for switch tracking in preparation for allowing system-wide events on all CPUs while the user requested events are on only user requested CPUs.
--- tools/perf/arch/x86/util/intel-pt.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-)
tools/perf/arch/x86/util/intel-pt.c +3 -10
@@ -811,18 +811,11 @@ static int intel_pt_recording_options(struct auxtrace_record *itr,if (!cpu_wide &&perf_can_record_cpu_wide ()) {struct evsel *switch_evsel; - err =parse_events (evlist,"dummy:u" ,NULL ); -if (err) -return err; + switch_evsel =evlist__add_dummy_on_all_cpus (evlist); +if (!switch_evsel) +return -ENOMEM ; - switch_evsel =evlist__last (evlist); - - switch_evsel->core.attr.freq =0 ; - switch_evsel->core.attr.sample_period =1 ; switch_evsel->core.attr.context_switch =1 ; - - switch_evsel->core.system_wide = true; - switch_evsel->no_aux_samples = true; switch_evsel->immediate = true;evsel__set_sample_bit (switch_evsel,TID );
Signature · 1 line
2.25.1
Adrian Hunter
reviewerPATCH v2 16/23 perf intel-pt: Track sideband system-wide when needed
In reply to Adrian HunterUser space tasks can migrate between CPUs, so when tracing selected CPUs, sideband for all CPUs is still needed. This is in preparation for allowing system-wide events on all CPUs while the user requested events are on only user requested CPUs.
--- tools/perf/arch/x86/util/intel-pt.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-)
tools/perf/arch/x86/util/intel-pt.c +10 -8
@@ -864,20 +864,22 @@ static int intel_pt_recording_options(struct auxtrace_record *itr,/* Add dummy event to keep tracking */ if (opts->full_auxtrace) { +bool need_system_wide_tracking;struct evsel *tracking_evsel; - err =parse_events (evlist,"dummy:u" ,NULL ); -if (err) -return err; +/* +* User space tasks can migrate between CPUs, so when tracing +* selected CPUs, sideband for all CPUs is still needed. +*/ + need_system_wide_tracking = evlist->core.has_user_cpus && + !intel_pt_evsel->core.attr.exclude_user; - tracking_evsel =evlist__last (evlist); + tracking_evsel =evlist__add_aux_dummy (evlist, need_system_wide_tracking); +if (!tracking_evsel) +return -ENOMEM ;evlist__set_tracking_event (evlist, tracking_evsel); - tracking_evsel->core.attr.freq =0 ; - tracking_evsel->core.attr.sample_period =1 ; - - tracking_evsel->no_aux_samples = true;if (need_immediate) tracking_evsel->immediate = true;
Signature · 1 line
2.25.1
Adrian Hunter
reviewerPATCH v2 17/23 perf tools: Allow all_cpus to be a superset of user_requested_cpus
In reply to Adrian HunterTo support collection of system-wide events with user requested CPUs, all_cpus must be a superset of user_requested_cpus.
In order to support all_cpus to be a superset of user_requested_cpus, all_cpus must be used instead of user_requested_cpus when dealing with CPUs of all events instead of CPUs of requested events.
--- tools/lib/perf/evlist.c | 12 ++++++------ tools/perf/builtin-record.c | 18 ++++++++++++------ tools/perf/util/auxtrace.c | 2 +- 3 files changed, 19 insertions(+), 13 deletions(-)
tools/lib/perf/evlist.c +6 -6
@@ -298,7 +298,7 @@ int perf_evlist__id_add_fd(struct perf_evlist *evlist,int perf_evlist__alloc_pollfd (struct perf_evlist *evlist) { -int nr_cpus =perf_cpu_map__nr (evlist->user_requested_cpus); +int nr_cpus =perf_cpu_map__nr (evlist->all_cpus);int nr_threads =perf_thread_map__nr (evlist->threads);int nfds =0 ;struct perf_evsel *evsel;
@@ -430,7 +430,7 @@ mmap_per_evsel(struct perf_evlist *evlist, struct perf_evlist_mmap_ops *ops, int idx, struct perf_mmap_param *mp, int cpu_idx, int thread, int *_output, int *_output_overwrite) { - struct perf_cpu evlist_cpu = perf_cpu_map__cpu(evlist->user_requested_cpus, cpu_idx); + struct perf_cpu evlist_cpu = perf_cpu_map__cpu(evlist->all_cpus, cpu_idx);struct perf_evsel *evsel;int revent;
@@ -540,7 +540,7 @@ mmap_per_cpu(struct perf_evlist *evlist, struct perf_evlist_mmap_ops *ops, struct perf_mmap_param *mp) {int nr_threads =perf_thread_map__nr (evlist->threads); -int nr_cpus =perf_cpu_map__nr (evlist->user_requested_cpus); +int nr_cpus =perf_cpu_map__nr (evlist->all_cpus);int cpu, thread;for (cpu =0 ; cpu < nr_cpus; cpu++) {
@@ -565,8 +565,8 @@ static int perf_evlist__nr_mmaps(struct perf_evlist *evlist) {int nr_mmaps; - nr_mmaps =perf_cpu_map__nr (evlist->user_requested_cpus); -if (perf_cpu_map__empty (evlist->user_requested_cpus)) + nr_mmaps =perf_cpu_map__nr (evlist->all_cpus); +if (perf_cpu_map__empty (evlist->all_cpus)) nr_mmaps =perf_thread_map__nr (evlist->threads);return nr_mmaps;
@@ -577,7 +577,7 @@ int perf_evlist__mmap_ops(struct perf_evlist *evlist, struct perf_mmap_param *mp) {struct perf_evsel *evsel; -const struct perf_cpu_map *cpus = evlist->user_requested_cpus; +const struct perf_cpu_map *cpus = evlist->all_cpus;if (!ops || !ops->get || !ops->mmap)return -EINVAL ;
tools/perf/builtin-record.c +12 -6
@@ -967,14 +967,20 @@ static void record__thread_data_close_pipes(struct record_thread *thread_data) } } +static bool evlist__per_thread (struct evlist *evlist) +{ +return cpu_map__is_dummy (evlist->core.user_requested_cpus); +} +static int record__thread_data_init_maps (struct record_thread *thread_data,struct evlist *evlist) {int m, tm, nr_mmaps = evlist->core.nr_mmaps;struct mmap *mmap = evlist->mmap;struct mmap *overwrite_mmap = evlist->overwrite_mmap; -struct perf_cpu_map *cpus = evlist->core.user_requested_cpus; +struct perf_cpu_map *cpus = evlist->core.all_cpus; +bool per_thread =evlist__per_thread (evlist); -if (cpu_map__is_dummy (cpus)) +if (per_thread) thread_data->nr_mmaps = nr_mmaps;else thread_data->nr_mmaps = bitmap_weight(thread_data->mask->maps.bits,
@@ -995,7 +1001,7 @@ static int record__thread_data_init_maps(struct record_thread *thread_data, stru thread_data->nr_mmaps, thread_data->maps, thread_data->overwrite_maps);for (m =0 , tm =0 ; m < nr_mmaps && tm < thread_data->nr_mmaps; m++) { -if (cpu_map__is_dummy (cpus) || +if (per_thread ||test_bit (perf_cpu_map__cpu (cpus, m).cpu, thread_data->mask->maps.bits)) {if (thread_data->maps) { thread_data->maps[tm] = &mmap[m];
@@ -1870,7 +1876,7 @@ static int record__synthesize(struct record *rec, bool tail)return err; } - err =perf_event__synthesize_cpu_map (&rec->tool, rec->evlist->core.user_requested_cpus, + err =perf_event__synthesize_cpu_map (&rec->tool, rec->evlist->core.all_cpus, process_synthesized_event,NULL );if (err <0 ) {pr_err ("Couldn't synthesize cpu map.\n" );
@@ -3668,12 +3674,12 @@ static int record__init_thread_default_masks(struct record *rec, struct perf_cpustatic int record__init_thread_masks (struct record *rec) {int ret =0 ; -struct perf_cpu_map *cpus = rec->evlist->core.user_requested_cpus; +struct perf_cpu_map *cpus = rec->evlist->core.all_cpus;if (!record__threads_enabled (rec))return record__init_thread_default_masks (rec, cpus); -if (cpu_map__is_dummy (cpus)) { +if (evlist__per_thread (rec->evlist)) {pr_err ("--per-thread option is mutually exclusive to parallel streaming mode.\n" );return -EINVAL ; }
tools/perf/util/auxtrace.c +1 -1
@@ -181,7 +181,7 @@ void auxtrace_mmap_params__set_idx(struct auxtrace_mmap_params *mp, mp->idx = idx;if (per_cpu) { - mp->cpu =perf_cpu_map__cpu (evlist->core.user_requested_cpus, idx); + mp->cpu =perf_cpu_map__cpu (evlist->core.all_cpus, idx);if (evlist->core.threads) mp->tid =perf_thread_map__pid (evlist->core.threads,0 );else
Signature · 1 line
2.25.1
Adrian Hunter
reviewerPATCH v2 18/23 libperf evlist: Allow mixing per-thread and per-cpu mmaps
In reply to Adrian Huntermmap_per_evsel() will skip events that do not match the CPU, so all CPUs can be iterated in any case.
--- tools/lib/perf/evlist.c | 36 +++++++----------------------------- 1 file changed, 7 insertions(+), 29 deletions(-)
tools/lib/perf/evlist.c +7 -29
@@ -512,29 +512,6 @@ mmap_per_evsel(struct perf_evlist *evlist, struct perf_evlist_mmap_ops *ops,return 0 ; } -static int -mmap_per_thread (struct perf_evlist *evlist,struct perf_evlist_mmap_ops *ops, -struct perf_mmap_param *mp) -{ -int thread; -int nr_threads =perf_thread_map__nr (evlist->threads); - -for (thread =0 ; thread < nr_threads; thread++) { -int output =-1 ; -int output_overwrite =-1 ; - -if (mmap_per_evsel (evlist, ops, thread, mp,0 , thread, - &output, &output_overwrite)) - goto out_unmap; - } - -return 0 ; - -out_unmap: -perf_evlist__munmap (evlist); -return -1 ; -} -static int mmap_per_cpu (struct perf_evlist *evlist,struct perf_evlist_mmap_ops *ops,struct perf_mmap_param *mp)
@@ -565,9 +542,14 @@ static int perf_evlist__nr_mmaps(struct perf_evlist *evlist) {int nr_mmaps; +/* One for each CPU */ nr_mmaps =perf_cpu_map__nr (evlist->all_cpus); -if (perf_cpu_map__empty (evlist->all_cpus)) - nr_mmaps =perf_thread_map__nr (evlist->threads); +if (perf_cpu_map__empty (evlist->all_cpus)) { +/* Plus one for each thread */ + nr_mmaps +=perf_thread_map__nr (evlist->threads); +/* Minus the per-thread CPU (-1) */ + nr_mmaps -=1 ; + }return nr_mmaps; }
@@ -577,7 +559,6 @@ int perf_evlist__mmap_ops(struct perf_evlist *evlist, struct perf_mmap_param *mp) {struct perf_evsel *evsel; -const struct perf_cpu_map *cpus = evlist->all_cpus;if (!ops || !ops->get || !ops->mmap)return -EINVAL ;
@@ -596,9 +577,6 @@ int perf_evlist__mmap_ops(struct perf_evlist *evlist,if (evlist->pollfd.entries ==NULL &&perf_evlist__alloc_pollfd (evlist) <0 )return -ENOMEM ; -if (perf_cpu_map__empty (cpus)) -return mmap_per_thread (evlist, ops, mp); -return mmap_per_cpu (evlist, ops, mp); }
Signature · 1 line
2.25.1
Adrian Hunter
reviewerPATCH v2 19/23 libperf evlist: Check nr_mmaps is correct
In reply to Adrian HunterPrint an error message if the predetermined number of mmaps is incorrect.
--- tools/lib/perf/evlist.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)
tools/lib/perf/evlist.c +9 -2
@@ -23,6 +23,7 @@#include <perf/cpumap.h> #include <perf/threadmap.h> #include <api/fd/array.h> +#include "internal.h" void perf_evlist__init (struct perf_evlist *evlist) {
@@ -428,7 +429,7 @@ static void perf_evlist__set_mmap_first(struct perf_evlist *evlist, struct perf_static int mmap_per_evsel (struct perf_evlist *evlist,struct perf_evlist_mmap_ops *ops,int idx,struct perf_mmap_param *mp,int cpu_idx, -int thread,int *_output,int *_output_overwrite) +int thread,int *_output,int *_output_overwrite,int *nr_mmaps) {struct perf_cpu evlist_cpu =perf_cpu_map__cpu (evlist->all_cpus, cpu_idx);struct perf_evsel *evsel;
@@ -484,6 +485,8 @@ mmap_per_evsel(struct perf_evlist *evlist, struct perf_evlist_mmap_ops *ops,if (ops->mmap (map, mp, *output, evlist_cpu) <0 )return -1 ; + *nr_mmaps +=1 ; +if (!idx)perf_evlist__set_mmap_first (evlist, map, overwrite); }else {
@@ -518,6 +521,7 @@ mmap_per_cpu(struct perf_evlist *evlist, struct perf_evlist_mmap_ops *ops, {int nr_threads =perf_thread_map__nr (evlist->threads);int nr_cpus =perf_cpu_map__nr (evlist->all_cpus); +int nr_mmaps =0 ;int cpu, thread;for (cpu =0 ; cpu < nr_cpus; cpu++) {
@@ -526,11 +530,14 @@ mmap_per_cpu(struct perf_evlist *evlist, struct perf_evlist_mmap_ops *ops,for (thread =0 ; thread < nr_threads; thread++) {if (mmap_per_evsel (evlist, ops, cpu, mp, cpu, - thread, &output, &output_overwrite)) + thread, &output, &output_overwrite, &nr_mmaps)) goto out_unmap; } } +if (nr_mmaps != evlist->nr_mmaps) +pr_err ("Miscounted nr_mmaps %d vs %d\n" , nr_mmaps, evlist->nr_mmaps); +return 0 ; out_unmap:
Signature · 1 line
2.25.1
Adrian Hunter
reviewerPATCH v2 23/23 perf tools: Allow system-wide events to keep their own threads
In reply to Adrian HunterSystem-wide events do not have threads, so do not propagate threads to them.
--- tools/lib/perf/evlist.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
tools/lib/perf/evlist.c +5 -2
@@ -52,8 +52,11 @@ static void __perf_evlist__propagate_maps(struct perf_evlist *evlist, evsel->cpus =perf_cpu_map__get (evsel->own_cpus); } -perf_thread_map__put (evsel->threads); - evsel->threads =perf_thread_map__get (evlist->threads); +if (!evsel->system_wide) { +perf_thread_map__put (evsel->threads); + evsel->threads =perf_thread_map__get (evlist->threads); + } + evlist->all_cpus =perf_cpu_map__merge (evlist->all_cpus, evsel->cpus); }
Signature · 1 line
2.25.1
Adrian Hunter
reviewerPATCH v2 22/23 perf tools: Allow system-wide events to keep their own CPUs
In reply to Adrian HunterCurrently, user_requested_cpus supplants system-wide CPUs when the evlist has_user_cpus. Change that so that system-wide events retain their own CPUs and they are added to all_cpus.
--- tools/lib/perf/evlist.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-)
tools/lib/perf/evlist.c +5 -6
@@ -40,12 +40,11 @@ static void __perf_evlist__propagate_maps(struct perf_evlist *evlist,* We already have cpus for evsel (via PMU sysfs) so * keep it, if there's no target cpu list defined. */ -if (!evsel->own_cpus || evlist->has_user_cpus) { -perf_cpu_map__put (evsel->cpus); - evsel->cpus =perf_cpu_map__get (evlist->user_requested_cpus); - }else if (!evsel->system_wide && - !evsel->requires_cpu && -perf_cpu_map__empty (evlist->user_requested_cpus)) { +if (!evsel->own_cpus || + (!evsel->system_wide && evlist->has_user_cpus) || + (!evsel->system_wide && + !evsel->requires_cpu && +perf_cpu_map__empty (evlist->user_requested_cpus))) {perf_cpu_map__put (evsel->cpus); evsel->cpus =perf_cpu_map__get (evlist->user_requested_cpus); }else if (evsel->cpus != evsel->own_cpus) {
Signature · 1 line
2.25.1
Adrian Hunter
reviewerPATCH v2 21/23 libperf evsel: Add comments for booleans
In reply to Adrian HunterAdd comments for 'system_wide' and 'requires_cpu' booleans
--- tools/lib/perf/include/internal/evsel.h | 9 +++++++++ 1 file changed, 9 insertions(+)
tools/lib/perf/include/internal/evsel.h +9 -0
@@ -49,7 +49,16 @@ struct perf_evsel {/* parse modifier helper */ int nr_members; +/* +* system_wide is for events that need to be on every CPU, irrespective +* of user requested CPUs or threads. Map propagation will not override +* this events own_cpus, which will contribute to evlist all_cpus. +*/ bool system_wide; +/* +* Some events, for example uncore events, require a CPU. +* i.e. it cannot be the 'any CPU' value of -1. +*/ bool requires_cpu;int idx; };
Signature · 1 line
2.25.1
Adrian Hunter
reviewerPATCH v2 20/23 perf stat: Add requires_cpu flag for uncore
In reply to Adrian HunterUncore events require a CPU i.e. it cannot be -1.
The evsel system_wide flag is intended for events that should be on every CPU, which does not make sense for uncore events because uncore events do not map one-to-one with CPUs.
These 2 requirements are not exactly the same, so introduce a new flag 'requires_cpu' for the uncore case.
--- tools/lib/perf/evlist.c | 4 +++- tools/lib/perf/include/internal/evsel.h | 1 + tools/perf/builtin-stat.c | 5 +---- tools/perf/util/evsel.c | 1 + tools/perf/util/parse-events.c | 2 +- 5 files changed, 7 insertions(+), 6 deletions(-)
tools/lib/perf/evlist.c +3 -1
@@ -43,7 +43,9 @@ static void __perf_evlist__propagate_maps(struct perf_evlist *evlist,if (!evsel->own_cpus || evlist->has_user_cpus) {perf_cpu_map__put (evsel->cpus); evsel->cpus =perf_cpu_map__get (evlist->user_requested_cpus); - }else if (!evsel->system_wide &&perf_cpu_map__empty (evlist->user_requested_cpus)) { + }else if (!evsel->system_wide && + !evsel->requires_cpu && +perf_cpu_map__empty (evlist->user_requested_cpus)) {perf_cpu_map__put (evsel->cpus); evsel->cpus =perf_cpu_map__get (evlist->user_requested_cpus); }else if (evsel->cpus != evsel->own_cpus) {
tools/lib/perf/include/internal/evsel.h +1 -0
@@ -50,6 +50,7 @@ struct perf_evsel {/* parse modifier helper */ int nr_members;bool system_wide; +bool requires_cpu;int idx; };
tools/perf/builtin-stat.c +1 -4
@@ -385,9 +385,6 @@ static int read_counter_cpu(struct evsel *counter, struct timespec *rs, int cpu_if (!counter->supported)return -ENOENT ; -if (counter->core.system_wide) - nthreads =1 ; -for (thread =0 ; thread < nthreads; thread++) {struct perf_counts_values *count;
@@ -2264,7 +2261,7 @@ static void setup_system_wide(int forks)struct evsel *counter;evlist__for_each_entry (evsel_list, counter) { -if (!counter->core.system_wide && +if (!counter->core.requires_cpu &&strcmp (counter->name,"duration_time" )) {return ; }
tools/perf/util/evsel.c +1 -0
@@ -382,6 +382,7 @@ struct evsel *evsel__clone(struct evsel *orig) evsel->core.threads =perf_thread_map__get (orig->core.threads); evsel->core.nr_members = orig->core.nr_members; evsel->core.system_wide = orig->core.system_wide; + evsel->core.requires_cpu = orig->core.requires_cpu;if (orig->name) { evsel->name =strdup (orig->name);
tools/perf/util/parse-events.c +1 -1
@@ -365,7 +365,7 @@ __add_event(struct list_head *list, int *idx, (*idx)++; evsel->core.cpus = cpus; evsel->core.own_cpus =perf_cpu_map__get (cpus); - evsel->core.system_wide = pmu ? pmu->is_uncore : false; + evsel->core.requires_cpu = pmu ? pmu->is_uncore : false; evsel->auto_merge_stats = auto_merge_stats;if (name)
Signature · 1 line
2.25.1
Ian Rogers
reviewerRe: [PATCH V2 13/23] perf evlist: Add evlist__add_dummy_on_all_cpus()
In reply to Adrian HunterQuoted 69 lines · Adrian Hunter
Add
evlist__add_dummy_on_all_cpus()to enable creating a system-wide dummy event that sets up the system-wide maps before map propagation.For convenience, add
evlist__add_aux_dummy()so that the logic can be used whether or not the event needs to be system-wide.Signed-off-by Adrian Hunter <[email protected]>--- tools/perf/util/evlist.c | 40 ++++++++++++++++++++++++++++++++++++++++ tools/perf/util/evlist.h | 5 +++++ 2 files changed, 45 insertions(+)tools/perf/util/evlist.c +40
-0@@ -264,6 +264,46 @@ int evlist__add_dummy(struct evlist *evlist)return 0 ; } +static void evlist__add_on_all_cpus (struct evlist *evlist,struct evsel *evsel) +{ + evsel->core.system_wide = true; + +/* All CPUs */ +perf_cpu_map__put (evsel->core.own_cpus); + evsel->core.own_cpus =perf_cpu_map__new (NULL ); +perf_cpu_map__put (evsel->core.cpus); + evsel->core.cpus =perf_cpu_map__get (evsel->core.own_cpus); + +/* No threads */ +perf_thread_map__put (evsel->core.threads); + evsel->core.threads =perf_thread_map__new_dummy (); + +evlist__add (evlist, evsel); +} + +struct evsel *evlist__add_aux_dummy (struct evlist *evlist,bool system_wide) +{ +struct evsel *evsel =evlist__dummy_event (evlist); + +if (!evsel) +return NULL ; + + evsel->core.attr.exclude_kernel =1 ; + evsel->core.attr.exclude_guest =1 ; + evsel->core.attr.exclude_hv =1 ; + evsel->core.attr.freq =0 ; + evsel->core.attr.sample_period =1 ; + evsel->no_aux_samples = true; + evsel->name =strdup ("dummy:u" ); + +if (system_wide) +evlist__add_on_all_cpus (evlist, evsel); +else +evlist__add (evlist, evsel); + +return evsel; +} +static int evlist__add_attrs (struct evlist *evlist,struct perf_event_attr *attrs,size_t nr_attrs) {struct evsel *evsel, *n;tools/perf/util/evlist.h +0
-0
tools/perf/util/evlist.h int arch_evlist__add_default_attrs(struct evlist *evlist); · line 118
Quoted 5 lines
tools/perf/util/evlist.h +2
-0@@ -114,6 +114,11 @@ int arch_evlist__add_default_attrs(struct evlist *evlist);struct evsel *arch_evlist__leader (struct list_head *list);int evlist__add_dummy (struct evlist *evlist); +struct evsel *evlist__add_aux_dummy (struct evlist *evlist,bool system_wide); +static inline struct evsel *evlist__add_dummy_on_all_cpus (struct evlist *evlist)
Sorry to be a language lawyer. What I hope to clean up with CPU maps is that:
empty == dummy == any CPU
https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/lib/perf/cpumap.c?h=perf/core#n279
Given every CPU map should be empty or contain any CPU then it seems they all meet the definition of empty - so something is wrong.
The cpu map here is explicitly opened so that it gets all online CPUs:
https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/lib/perf/cpumap.c?h=perf/core#n174
From:
https://github.com/torvalds/linux/blob/master/Documentation/admin-guide/cputopology.rst
there are example topologies like:kernel_max: 31
offline: 2,4-31,32-63
online: 0-1,3
possible: 0-31
present: 0-31
all_cpus could mean the union of offline and online CPUs, possible CPUs or present CPUs. You are saying that in the perf code all_cpus should be the same as all online cpus as only those CPUs are valid with perf_event_open. That's true but offline CPUs can be made online. If that happens here then the dummy events will have a CPU map that rather than being for all CPUs will be for all online CPUs at the point it was opened. Having online in the function name I think captures the time dependent nature of this - but if you think that's too much could we add a comment? I'm trying to avoid a situation, like with the CPU map code, where all and online are interchangeable leading to the code being unnecessarily confusing unless you read every line.
Thanks,
Ian
Quoted 9 lines
tools/perf/util/evlist.h +3
-1+{ +return evlist__add_aux_dummy (evlist, true); +}int evlist__add_sb_event (struct evlist *evlist,struct perf_event_attr *attr,evsel__sb_cb_t cb,void *data); --2.25.1
Adrian Hunter
reviewerRe: [PATCH V2 13/23] perf evlist: Add evlist__add_dummy_on_all_cpus()
Quoted 78 lines · Ian Rogers
Quoted 69 lines · Adrian Hunter
Add
evlist__add_dummy_on_all_cpus()to enable creating a system-wide dummy event that sets up the system-wide maps before map propagation.For convenience, add
evlist__add_aux_dummy()so that the logic can be used whether or not the event needs to be system-wide.Signed-off-by Adrian Hunter <[email protected]>--- tools/perf/util/evlist.c | 40 ++++++++++++++++++++++++++++++++++++++++ tools/perf/util/evlist.h | 5 +++++ 2 files changed, 45 insertions(+)tools/perf/util/evlist.c +40
-0@@ -264,6 +264,46 @@ int evlist__add_dummy(struct evlist *evlist)return 0 ; } +static void evlist__add_on_all_cpus (struct evlist *evlist,struct evsel *evsel) +{ + evsel->core.system_wide = true; + +/* All CPUs */ +perf_cpu_map__put (evsel->core.own_cpus); + evsel->core.own_cpus =perf_cpu_map__new (NULL ); +perf_cpu_map__put (evsel->core.cpus); + evsel->core.cpus =perf_cpu_map__get (evsel->core.own_cpus); + +/* No threads */ +perf_thread_map__put (evsel->core.threads); + evsel->core.threads =perf_thread_map__new_dummy (); + +evlist__add (evlist, evsel); +} + +struct evsel *evlist__add_aux_dummy (struct evlist *evlist,bool system_wide) +{ +struct evsel *evsel =evlist__dummy_event (evlist); + +if (!evsel) +return NULL ; + + evsel->core.attr.exclude_kernel =1 ; + evsel->core.attr.exclude_guest =1 ; + evsel->core.attr.exclude_hv =1 ; + evsel->core.attr.freq =0 ; + evsel->core.attr.sample_period =1 ; + evsel->no_aux_samples = true; + evsel->name =strdup ("dummy:u" ); + +if (system_wide) +evlist__add_on_all_cpus (evlist, evsel); +else +evlist__add (evlist, evsel); + +return evsel; +} +static int evlist__add_attrs (struct evlist *evlist,struct perf_event_attr *attrs,size_t nr_attrs) {struct evsel *evsel, *n;tools/perf/util/evlist.h +0
-0tools/perf/util/evlist.h int arch_evlist__add_default_attrs(struct evlist *evlist); · line 118
Quoted 5 lines
tools/perf/util/evlist.h +2
-0@@ -114,6 +114,11 @@ int arch_evlist__add_default_attrs(struct evlist *evlist);struct evsel *arch_evlist__leader (struct list_head *list);int evlist__add_dummy (struct evlist *evlist); +struct evsel *evlist__add_aux_dummy (struct evlist *evlist,bool system_wide); +static inline struct evsel *evlist__add_dummy_on_all_cpus (struct evlist *evlist)Sorry to be a language lawyer. What I hope to clean up with CPU maps is that:
Quoted 5 lines
empty == dummy == any CPU
https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/lib/perf/cpumap.c?h=perf/core#n279Given every CPU map should be empty or contain any CPU then it seems they all meet the definition of empty - so something is wrong.
Nothing is wrong. I am not against clarifying things, but stop assuming natural language has to mean anything exactly. That is what computer languages are for.
Sometimes more abstract language is used, precisely to stop people making assumptions about the details.
Quoted 13 lines
The cpu map here is explicitly opened so that it gets all online CPUs:
https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/lib/perf/cpumap.c?h=perf/core#n174From:
https://github.com/torvalds/linux/blob/master/Documentation/admin-guide/cputopology.rst
there are example topologies like:kernel_max: 31
offline: 2,4-31,32-63online: 0-1,3possible: 0-31
present: 0-31
Quoted 9 lines
all_cpuscould mean the union of offline and online CPUs, possible CPUs or present CPUs. You are saying that in the perf codeall_cpusshould be the same as all online cpus as only those CPUs are valid withperf_event_open. That's true but offline CPUs can be made online. If that happens here then the dummy events will have a CPU map that rather than being for all CPUs will be for all online CPUs at the point it was opened. Having online in the function name I think captures the time dependent nature of this - but if you think that's too much could we add a comment?
If you ask me it does the exact opposite. The function of the code is to put the event on all CPUS without having to know the details
of: well actually perf doesn't automagically retain or restore events across enabling or disabling CPUs so in fact we deal only in online CPUs.
Quoted 4 lines
too much could we add a comment? I'm trying to avoid a situation, like with the CPU map code, where all and online are interchangeable leading to the code being unnecessarily confusing unless you read every line.
It is normal to have to read the details of code, and, in my experience at least, normal for the code not to work exactly the way I'd imagined.
Quoted 13 lines
Thanks,
IanQuoted 9 lines
tools/perf/util/evlist.h +3
-1+{ +return evlist__add_aux_dummy (evlist, true); +}int evlist__add_sb_event (struct evlist *evlist,struct perf_event_attr *attr,evsel__sb_cb_t cb,void *data); --2.25.1
Ian Rogers
reviewerRe: [PATCH V2 13/23] perf evlist: Add evlist__add_dummy_on_all_cpus()
Quoted 116 lines · Adrian Hunter
Quoted 78 lines · Ian Rogers
Quoted 69 lines · Adrian Hunter
Add
evlist__add_dummy_on_all_cpus()to enable creating a system-wide dummy event that sets up the system-wide maps before map propagation.For convenience, add
evlist__add_aux_dummy()so that the logic can be used whether or not the event needs to be system-wide.Signed-off-by Adrian Hunter <[email protected]>--- tools/perf/util/evlist.c | 40 ++++++++++++++++++++++++++++++++++++++++ tools/perf/util/evlist.h | 5 +++++ 2 files changed, 45 insertions(+)tools/perf/util/evlist.c +40
-0@@ -264,6 +264,46 @@ int evlist__add_dummy(struct evlist *evlist)return 0 ; } +static void evlist__add_on_all_cpus (struct evlist *evlist,struct evsel *evsel) +{ + evsel->core.system_wide = true; + +/* All CPUs */ +perf_cpu_map__put (evsel->core.own_cpus); + evsel->core.own_cpus =perf_cpu_map__new (NULL ); +perf_cpu_map__put (evsel->core.cpus); + evsel->core.cpus =perf_cpu_map__get (evsel->core.own_cpus); + +/* No threads */ +perf_thread_map__put (evsel->core.threads); + evsel->core.threads =perf_thread_map__new_dummy (); + +evlist__add (evlist, evsel); +} + +struct evsel *evlist__add_aux_dummy (struct evlist *evlist,bool system_wide) +{ +struct evsel *evsel =evlist__dummy_event (evlist); + +if (!evsel) +return NULL ; + + evsel->core.attr.exclude_kernel =1 ; + evsel->core.attr.exclude_guest =1 ; + evsel->core.attr.exclude_hv =1 ; + evsel->core.attr.freq =0 ; + evsel->core.attr.sample_period =1 ; + evsel->no_aux_samples = true; + evsel->name =strdup ("dummy:u" ); + +if (system_wide) +evlist__add_on_all_cpus (evlist, evsel); +else +evlist__add (evlist, evsel); + +return evsel; +} +static int evlist__add_attrs (struct evlist *evlist,struct perf_event_attr *attrs,size_t nr_attrs) {struct evsel *evsel, *n;tools/perf/util/evlist.h +0
-0tools/perf/util/evlist.h int arch_evlist__add_default_attrs(struct evlist *evlist); · line 118
Quoted 5 lines
tools/perf/util/evlist.h +2
-0@@ -114,6 +114,11 @@ int arch_evlist__add_default_attrs(struct evlist *evlist);struct evsel *arch_evlist__leader (struct list_head *list);int evlist__add_dummy (struct evlist *evlist); +struct evsel *evlist__add_aux_dummy (struct evlist *evlist,bool system_wide); +static inline struct evsel *evlist__add_dummy_on_all_cpus (struct evlist *evlist)Sorry to be a language lawyer. What I hope to clean up with CPU maps is that:
Quoted 5 lines
empty == dummy == any CPU
https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/lib/perf/cpumap.c?h=perf/core#n279Given every CPU map should be empty or contain any CPU then it seems they all meet the definition of empty - so something is wrong.
Nothing is wrong. I am not against clarifying things, but stop assuming natural language has to mean anything exactly. That is what computer languages are for.
Sometimes more abstract language is used, precisely to stop people making assumptions about the details.
Quoted 13 lines
The cpu map here is explicitly opened so that it gets all online CPUs:
https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/lib/perf/cpumap.c?h=perf/core#n174From:
https://github.com/torvalds/linux/blob/master/Documentation/admin-guide/cputopology.rst
there are example topologies like:kernel_max: 31
offline: 2,4-31,32-63online: 0-1,3possible: 0-31
present: 0-31Quoted 9 lines
all_cpuscould mean the union of offline and online CPUs, possible CPUs or present CPUs. You are saying that in the perf codeall_cpusshould be the same as all online cpus as only those CPUs are valid withperf_event_open. That's true but offline CPUs can be made online. If that happens here then the dummy events will have a CPU map that rather than being for all CPUs will be for all online CPUs at the point it was opened. Having online in the function name I think captures the time dependent nature of this - but if you think that's too much could we add a comment?
Quoted 5 lines
If you ask me it does the exact opposite. The function of the code is to put the event on all CPUS without having to know the details
of: well actually perf doesn't automagically retain or restore events across enabling or disabling CPUs so in fact we deal only in online CPUs.
But 'any CPU' (-1) could map to an offline CPU brought online. Calling this function twice could also result in this behavior. Via the topology documentation we have language to describe exactly the scenario that's happening and I'd prefer not to muddy that by making all and online synonyms.
Quoted 8 lines
Quoted 4 lines
too much could we add a comment? I'm trying to avoid a situation, like with the CPU map code, where all and online are interchangeable leading to the code being unnecessarily confusing unless you read every line.
It is normal to have to read the details of code, and, in my experience at least, normal for the code not to work exactly the way I'd imagined.
:-) The problem is that we all need to work with abstractions at some point, abstraction is pretty much the whole point of computer science. We need to fix CPU maps empty function, it is just a fundamental level of contradiction. As with the CPU map index being often mistaken for the CPU leading to bugs and crashes, I suspect remedying empty will fix existing and future bugs. With function naming the point is to be short and succinct, but also to be intention revealing for the sake of abstraction. Yes you need to read the code, but as with CPU map empty even that isn't enough and trying to infer behavior from usage can be a long and painful process.
Thanks,
Ian
Quoted 14 lines
Quoted 13 lines
Thanks,
IanQuoted 9 lines
tools/perf/util/evlist.h +3
-1+{ +return evlist__add_aux_dummy (evlist, true); +}int evlist__add_sb_event (struct evlist *evlist,struct perf_event_attr *attr,evsel__sb_cb_t cb,void *data); --2.25.1
Re: [PATCH V2 02/23] libperf evsel: Add perf_evsel__enable_thread()
In reply to Adrian HunterQuoted 5 lines · Adrian Hunter
Add
perf_evsel__enable_thread()as a counterpart toperf_evsel__enable_cpu(), to enable all events for a thread.Signed-off-by Adrian Hunter <[email protected]>
Thanks,
Ian
Quoted 46 lines
--- tools/lib/perf/evsel.c | 15 +++++++++++++++ tools/lib/perf/include/perf/evsel.h | 1 + 2 files changed, 16 insertions(+)tools/lib/perf/evsel.c +15
-0@@ -360,6 +360,21 @@ int perf_evsel__enable_cpu(struct perf_evsel *evsel, int cpu_map_idx)return perf_evsel__run_ioctl (evsel,PERF_EVENT_IOC_ENABLE ,NULL , cpu_map_idx); } +int perf_evsel__enable_thread (struct perf_evsel *evsel,int thread) +{ +struct perf_cpu cpu__maybe_unused ; +int idx; +int err; + +perf_cpu_map__for_each_cpu (cpu, idx, evsel->cpus) { + err =perf_evsel__ioctl (evsel,PERF_EVENT_IOC_ENABLE ,NULL , idx, thread); +if (err) +return err; + } + +return 0 ; +} +int perf_evsel__enable (struct perf_evsel *evsel) {int i;tools/lib/perf/include/perf/evsel.h +1
-1@@ -36,6 +36,7 @@ LIBPERF_API int perf_evsel__read(struct perf_evsel *evsel, int cpu_map_idx, int struct perf_counts_values *count); LIBPERF_API int perf_evsel__enable(struct perf_evsel *evsel); LIBPERF_API int perf_evsel__enable_cpu(struct perf_evsel *evsel, int cpu_map_idx); +LIBPERF_API int perf_evsel__enable_thread(struct perf_evsel *evsel, int thread); LIBPERF_API int perf_evsel__disable(struct perf_evsel *evsel); LIBPERF_API int perf_evsel__disable_cpu(struct perf_evsel *evsel, int cpu_map_idx); LIBPERF_API struct perf_cpu_map *perf_evsel__cpus(struct perf_evsel *evsel); --2.25.1
Ian Rogers
reviewerRe: [PATCH V2 10/23] perf auxtrace: Add mmap_needed to auxtrace_mmap_params
In reply to Adrian HunterQuoted 8 lines · Adrian Hunter
Add
mmap_neededtoauxtrace_mmap_params.Currently an auxtrace mmap is always attempted even if the event is not an auxtrace event. That works because, when AUX area tracing, there is always an auxtrace event first for every mmap. Prepare for that not being the case, which it won't be when sideband tracking events are allowed on all CPUs even when auxtrace is limited to selected CPUs.
Should there be a later patch to remove this option and just not do the auxtrace mmap when it's not necessary?
Quoted 43 lines
Signed-off-by Adrian Hunter <[email protected]>--- tools/perf/util/auxtrace.c | 10 ++++++++-- tools/perf/util/auxtrace.h | 8 ++++++-- tools/perf/util/evlist.c | 5 +++-- tools/perf/util/mmap.c | 1 + 4 files changed, 18 insertions(+), 6 deletions(-)tools/perf/util/auxtrace.c +8
-2@@ -125,7 +125,7 @@ int auxtrace_mmap__mmap(struct auxtrace_mmap *mm, mm->tid = mp->tid; mm->cpu = mp->cpu.cpu; -if (!mp->len) { +if (!mp->len || !mp->mmap_needed) { mm->base =NULL ;return 0 ; }@@ -168,9 +168,15 @@ void auxtrace_mmap_params__init(struct auxtrace_mmap_params *mp, }void auxtrace_mmap_params__set_idx (struct auxtrace_mmap_params *mp, -struct evlist *evlist,int idx, +struct evlist *evlist, +struct evsel *evsel,int idx,bool per_cpu) { + mp->mmap_needed = evsel->needs_auxtrace_mmap; + +if (!mp->mmap_needed) +return ; + mp->idx = idx;if (per_cpu) {tools/perf/util/auxtrace.h +0
-0
tools/perf/util/auxtrace.h struct auxtrace_mmap { · line 347
Quoted 4 lines
tools/perf/util/auxtrace.h +1
-0@@ -344,6 +344,7 @@ struct auxtrace_mmap {* @idx: index of this mmap * @tid: tid for a per-thread mmap (also set if there is only 1 tid on a per-cpu * mmap) otherwise %0 +* @mmap_needed: set to %false for non-auxtrace events
Could you add something like:
(ie. we don't want the mmap but we do want the side effects of ...
Thanks,
Ian
Quoted 69 lines
tools/perf/util/auxtrace.h +5
-2* @cpu: cpu number for a per-cpu mmap otherwise %-1 */ struct auxtrace_mmap_params {@@ -353,6 +354,7 @@ struct auxtrace_mmap_params {int prot;int idx;pid_t tid; +bool mmap_needed;struct perf_cpu cpu; };@@ -490,7 +492,8 @@ void auxtrace_mmap_params__init(struct auxtrace_mmap_params *mp,unsigned int auxtrace_pages, bool auxtrace_overwrite);void auxtrace_mmap_params__set_idx (struct auxtrace_mmap_params *mp, -struct evlist *evlist,int idx, +struct evlist *evlist, +struct evsel *evsel,int idx,bool per_cpu); typedef int (*process_auxtrace_t)(struct perf_tool *tool,@@ -863,7 +866,8 @@ void auxtrace_mmap_params__init(struct auxtrace_mmap_params *mp,unsigned int auxtrace_pages, bool auxtrace_overwrite);void auxtrace_mmap_params__set_idx (struct auxtrace_mmap_params *mp, -struct evlist *evlist,int idx, +struct evlist *evlist, +struct evsel *evsel,int idx,bool per_cpu);#define ITRACE_HELP ""tools/perf/util/evlist.c +3
-2@@ -747,15 +747,16 @@ static struct mmap *evlist__alloc_mmap(struct evlist *evlist,static void perf_evlist__mmap_cb_idx (struct perf_evlist *_evlist, -struct perf_evsel *_evsel__maybe_unused , +struct perf_evsel *_evsel,struct perf_mmap_param *_mp,int idx) { struct evlist *evlist = container_of(_evlist, struct evlist, core); struct mmap_params *mp = container_of(_mp, struct mmap_params, core);bool per_cpu = !perf_cpu_map__empty (_evlist->user_requested_cpus); + struct evsel *evsel = container_of(_evsel, struct evsel, core); -auxtrace_mmap_params__set_idx (&mp->auxtrace_mp, evlist, idx, per_cpu); +auxtrace_mmap_params__set_idx (&mp->auxtrace_mp, evlist, evsel, idx, per_cpu); } static struct perf_mmap*tools/perf/util/mmap.c +1
-1@@ -62,6 +62,7 @@ void __weak auxtrace_mmap_params__init(struct auxtrace_mmap_params *mp __maybe_uvoid __weak auxtrace_mmap_params__set_idx (struct auxtrace_mmap_params *mp__maybe_unused ,struct evlist *evlist__maybe_unused , +struct evsel *evsel__maybe_unused ,int idx__maybe_unused ,bool per_cpu__maybe_unused ) { --2.25.1
Re: [PATCH V2 11/23] perf auxtrace: Remove auxtrace_mmap_params__set_idx() per_cpu parameter
In reply to Adrian HunterQuoted 5 lines · Adrian Hunter
Remove
auxtrace_mmap_params__set_idx()per_cpuparameter because it isn't needed.Signed-off-by Adrian Hunter <[email protected]>
Thanks,
Ian
Quoted 81 lines
--- tools/perf/util/auxtrace.c | 5 +++-- tools/perf/util/auxtrace.h | 6 ++---- tools/perf/util/evlist.c | 3 +-- tools/perf/util/mmap.c | 3 +-- 4 files changed, 7 insertions(+), 10 deletions(-)tools/perf/util/auxtrace.c +3
-2@@ -169,9 +169,10 @@ void auxtrace_mmap_params__init(struct auxtrace_mmap_params *mp,void auxtrace_mmap_params__set_idx (struct auxtrace_mmap_params *mp,struct evlist *evlist, -struct evsel *evsel,int idx, -bool per_cpu) +struct evsel *evsel,int idx) { +bool per_cpu = !perf_cpu_map__empty (evlist->core.user_requested_cpus); + mp->mmap_needed = evsel->needs_auxtrace_mmap;if (!mp->mmap_needed)tools/perf/util/auxtrace.h +2
-4@@ -493,8 +493,7 @@ void auxtrace_mmap_params__init(struct auxtrace_mmap_params *mp, bool auxtrace_overwrite);void auxtrace_mmap_params__set_idx (struct auxtrace_mmap_params *mp,struct evlist *evlist, -struct evsel *evsel,int idx, -bool per_cpu); +struct evsel *evsel,int idx); typedef int (*process_auxtrace_t)(struct perf_tool *tool, struct mmap *map,@@ -867,8 +866,7 @@ void auxtrace_mmap_params__init(struct auxtrace_mmap_params *mp, bool auxtrace_overwrite);void auxtrace_mmap_params__set_idx (struct auxtrace_mmap_params *mp,struct evlist *evlist, -struct evsel *evsel,int idx, -bool per_cpu); +struct evsel *evsel,int idx);#define ITRACE_HELP ""tools/perf/util/evlist.c +1
-2@@ -753,10 +753,9 @@ perf_evlist__mmap_cb_idx(struct perf_evlist *_evlist, { struct evlist *evlist = container_of(_evlist, struct evlist, core); struct mmap_params *mp = container_of(_mp, struct mmap_params, core); -bool per_cpu = !perf_cpu_map__empty (_evlist->user_requested_cpus); struct evsel *evsel = container_of(_evsel, struct evsel, core); -auxtrace_mmap_params__set_idx (&mp->auxtrace_mp, evlist, evsel, idx, per_cpu); +auxtrace_mmap_params__set_idx (&mp->auxtrace_mp, evlist, evsel, idx); } static struct perf_mmap*tools/perf/util/mmap.c +1
-3@@ -63,8 +63,7 @@ void __weak auxtrace_mmap_params__init(struct auxtrace_mmap_params *mp __maybe_uvoid __weak auxtrace_mmap_params__set_idx (struct auxtrace_mmap_params *mp__maybe_unused ,struct evlist *evlist__maybe_unused ,struct evsel *evsel__maybe_unused , -int idx__maybe_unused , -bool per_cpu__maybe_unused ) +int idx__maybe_unused ) { } --2.25.1
Re: [PATCH V2 19/23] libperf evlist: Check nr_mmaps is correct
In reply to Adrian HunterQuoted 5 lines · Adrian Hunter
Print an error message if the predetermined number of mmaps is incorrect.
Signed-off-by Adrian Hunter <[email protected]>
Thanks,
Ian
Quoted 61 lines
--- tools/lib/perf/evlist.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)tools/lib/perf/evlist.c +9
-3@@ -23,6 +23,7 @@#include <perf/cpumap.h> #include <perf/threadmap.h> #include <api/fd/array.h> +#include "internal.h" void perf_evlist__init (struct perf_evlist *evlist) {@@ -428,7 +429,7 @@ static void perf_evlist__set_mmap_first(struct perf_evlist *evlist, struct perf_static int mmap_per_evsel (struct perf_evlist *evlist,struct perf_evlist_mmap_ops *ops,int idx,struct perf_mmap_param *mp,int cpu_idx, -int thread,int *_output,int *_output_overwrite) +int thread,int *_output,int *_output_overwrite,int *nr_mmaps) {struct perf_cpu evlist_cpu =perf_cpu_map__cpu (evlist->all_cpus, cpu_idx);struct perf_evsel *evsel;@@ -484,6 +485,8 @@ mmap_per_evsel(struct perf_evlist *evlist, struct perf_evlist_mmap_ops *ops,if (ops->mmap (map, mp, *output, evlist_cpu) <0 )return -1 ; + *nr_mmaps +=1 ; +if (!idx)perf_evlist__set_mmap_first (evlist, map, overwrite); }else {@@ -518,6 +521,7 @@ mmap_per_cpu(struct perf_evlist *evlist, struct perf_evlist_mmap_ops *ops, {int nr_threads =perf_thread_map__nr (evlist->threads);int nr_cpus =perf_cpu_map__nr (evlist->all_cpus); +int nr_mmaps =0 ;int cpu, thread;for (cpu =0 ; cpu < nr_cpus; cpu++) {@@ -526,11 +530,14 @@ mmap_per_cpu(struct perf_evlist *evlist, struct perf_evlist_mmap_ops *ops,for (thread =0 ; thread < nr_threads; thread++) {if (mmap_per_evsel (evlist, ops, cpu, mp, cpu, - thread, &output, &output_overwrite)) + thread, &output, &output_overwrite, &nr_mmaps)) goto out_unmap; } } +if (nr_mmaps != evlist->nr_mmaps) +pr_err ("Miscounted nr_mmaps %d vs %d\n" , nr_mmaps, evlist->nr_mmaps); +return 0 ; out_unmap: --2.25.1
Ian Rogers
reviewerRe: [PATCH V2 21/23] libperf evsel: Add comments for booleans
In reply to Adrian HunterQuoted 13 lines · Adrian Hunter
Add comments for '
system_wide' and 'requires_cpu' booleansSigned-off-by Adrian Hunter <[email protected]>--- tools/lib/perf/include/internal/evsel.h | 9 +++++++++ 1 file changed, 9 insertions(+)tools/lib/perf/include/internal/evsel.h +0
-0
tools/lib/perf/include/internal/evsel.h struct perf_evsel { · line 55
Quoted 7 lines
tools/lib/perf/include/internal/evsel.h +4
-0@@ -49,7 +49,16 @@ struct perf_evsel {/* parse modifier helper */ int nr_members; +/* +* system_wide is for events that need to be on every CPU, irrespective +* of user requested CPUs or threads. Map propagation will not override +* this events own_cpus, which will contribute to evlist all_cpus.
So this muddies my understanding of cpus and own_cpus (sigh, again undocumented). I believe cpus to be the set of CPUs (or any CPU, aka dummy) that perf_event_open happens on. all_cpus in evlist is the union of all the evsels cpus (ie not related to own_cpus as described here). Own_cpus I believe to be what's computed at parse-event time from sysfs. Is this a typo in the comment or quite likely my error?
Thanks,
Ian
Quoted 12 lines
tools/lib/perf/include/internal/evsel.h +5
-1+*/ bool system_wide; +/* +* Some events, for example uncore events, require a CPU. +* i.e. it cannot be the 'any CPU' value of -1. +*/ bool requires_cpu;int idx; }; --2.25.1
Hi Adrian,
Quoted 27 lines · Adrian Hunter
Hi
Here are V2 patches to support capturing Intel PT sideband events such as mmap, task, context switch, text poke etc, on every CPU even when tracing selected
user_requested_cpus. That is, when using the perf record -C or
--cpu option.This is needed for:
1. text poke: a text poke on any CPU affects all CPUs
2. tracing user space: a user space process can migrate between CPUs so mmap events that happen on a different CPU can be needed to decode auser_requested_cpusCPU.For example:
Trace on CPU 1:
perf record --kcore -C 1 -e intel_pt// &
Start a task on CPU 0:
taskset
0x1testprog &Migrate it to CPU 1:
taskset -p
0x2<testprog pid>
Quoted 7 lines
Stop tracing:
kill %1
Prior to these changes there will be errors decoding testprog in userspace because the comm and mmap events for testprog will not have been captured.
Thanks a lot for this patch set, I believe this is a common issue for AUX trace (not only for Intel-PT), so I verified this patch set for both Arm CoreSight and SPE; unfortunately both cannot see MMAP events for migrated task. I used below commands:
# perf record -B -N --no-bpf-event -e cs_etm//u -C 0 -- taskset --cpu-list 1 uname # perf script --no-itrace --show-mmap-events -C 1 2>/dev/null | grep MMAP | wc -l 0
# perf record -B -N --no-bpf-event -e arm_spe_0//u -C 0 -- taskset --cpu-list 1 uname # perf script --no-itrace --show-mmap-events -C 1 2>/dev/null | grep MMAP | wc -l 0
I didn't dive into details for this patch set, so I cannot say the failure is caused by any issue in this patch set. But it's definitely we need to look into for Arm platforms to root cause what's the reason it cannot record MMAP events properly when migrate tasks. Loop James and German for this reason.
Thanks,
Leo
Adrian Hunter
reviewerQuoted 52 lines · Leo Yan
Hi Adrian,
Quoted 27 lines · Adrian Hunter
Hi
Here are V2 patches to support capturing Intel PT sideband events such as mmap, task, context switch, text poke etc, on every CPU even when tracing selected
user_requested_cpus. That is, when using the perf record -C or
--cpu option.This is needed for:
1. text poke: a text poke on any CPU affects all CPUs
2. tracing user space: a user space process can migrate between CPUs so mmap events that happen on a different CPU can be needed to decode auser_requested_cpusCPU.For example:
Trace on CPU 1:
perf record --kcore -C 1 -e intel_pt// &
Start a task on CPU 0:
taskset
0x1testprog &Migrate it to CPU 1:
taskset -p
0x2<testprog pid>Quoted 7 lines
Stop tracing:
kill %1
Prior to these changes there will be errors decoding testprog in userspace because the comm and mmap events for testprog will not have been captured.
Thanks a lot for this patch set, I believe this is a common issue for AUX trace (not only for Intel-PT), so I verified this patch set for both Arm CoreSight and SPE; unfortunately both cannot see MMAP events for migrated task. I used below commands:
# perf record -B -N --no-bpf-event -e cs_etm//u -C 0 -- taskset --cpu-list 1 uname # perf script --no-itrace --show-mmap-events -C 1 2>/dev/null | grep MMAP | wc -l 0# perf record -B -N --no-bpf-event -e arm_spe_0//u -C 0 -- taskset --cpu-list 1 uname # perf script --no-itrace --show-mmap-events -C 1 2>/dev/null | grep MMAP | wc -l 0
Quoted 5 lines
I didn't dive into details for this patch set, so I cannot say the failure is caused by any issue in this patch set. But it's definitely we need to look into for Arm platforms to root cause what's the reason it cannot record MMAP events properly when migrate tasks. Loop James and German for this reason.
You would need the equivalent of patch "perf intel-pt: Track sideband system-wide when needed" which makes use of new helper evlist__add_aux_dummy() to set up the dummy event with the option to make it "system wide".
cs_etm_recording_options() and arm_spe_recording_options() have similar code.
You will need to decide if it is worth the extra sideband. I decided if it became an issue, it could be made optional in the future.
On Mon, May 09, 2022 at 08:44:02AM +0300, Adrian Hunter wrote:
[...]
Quoted 20 lines
Quoted 14 lines
Thanks a lot for this patch set, I believe this is a common issue for AUX trace (not only for Intel-PT), so I verified this patch set for both Arm CoreSight and SPE; unfortunately both cannot see MMAP events for migrated task. I used below commands:
# perf record -B -N --no-bpf-event -e cs_etm//u -C 0 -- taskset --cpu-list 1 uname # perf script --no-itrace --show-mmap-events -C 1 2>/dev/null | grep MMAP | wc -l 0# perf record -B -N --no-bpf-event -e arm_spe_0//u -C 0 -- taskset --cpu-list 1 uname # perf script --no-itrace --show-mmap-events -C 1 2>/dev/null | grep MMAP | wc -l 0Quoted 5 lines
I didn't dive into details for this patch set, so I cannot say the failure is caused by any issue in this patch set. But it's definitely we need to look into for Arm platforms to root cause what's the reason it cannot record MMAP events properly when migrate tasks. Loop James and German for this reason.
Quoted 7 lines
You would need the equivalent of patch "perf intel-pt: Track sideband system-wide when needed" which makes use of new helper
evlist__add_aux_dummy()to set up the dummy event with the option to make it "system wide".
cs_etm_recording_options()andarm_spe_recording_options()have similar code.
Thanks a lot for the guidance.
I applied the simliar change for cs_etm_recording_options() and arm_spe_recording_options(), both can pass below tests:
# perf record -B -N --no-bpf-event -e cs_etm//u -C 0 -- taskset --cpu-list 1 uname # perf script --no-itrace --show-mmap-events -C 1 2>/dev/null | grep MMAP | wc -l 4
# perf record -B -N --no-bpf-event -e arm_spe_0//u -C 0 -- taskset --cpu-list 1 uname # perf script --no-itrace --show-mmap-events -C 1 2>/dev/null | grep MMAP | wc -l 4
And I tested a more complex case for migrating a test program 'sysbench' in the middle of perf session, it still fails to parse any samples testing program 'sysbench'. I need to do more homework for this part, but welcome any suggestions, thanks! The testing script is:
---8<---
export PATH=/mnt/export/arm-linux-kernel/tools/perf/:$PATH
perf record --kcore -C 1 -e cs_etm// &
PERF_PID=$!
echo "Perf PID ${PERF_PID}"
sleep 2
taskset 0x1 ./sysbench --test=memory --max-requests=1000000000 run & TEST_PROG_PID=$!
echo "Test Prog PID ${TEST_PROG_PID}"
sleep 1
taskset -p 0x2 $TEST_PROG_PID
sleep 1
kill $PERF_PID
Quoted 2 lines
You will need to decide if it is worth the extra sideband. I decided if it became an issue, it could be made optional in the future.
Yeah, the condition checking for system wide tracking in patch 16/23 looks good to me.
Thanks,
Leo
Adrian Hunter
reviewerRe: [PATCH V2 13/23] perf evlist: Add evlist__add_dummy_on_all_cpus()
In reply to Ian RogersQuoted 123 lines · Ian Rogers
Quoted 116 lines · Adrian Hunter
Quoted 78 lines · Ian Rogers
Quoted 69 lines · Adrian Hunter
Add
evlist__add_dummy_on_all_cpus()to enable creating a system-wide dummy event that sets up the system-wide maps before map propagation.For convenience, add
evlist__add_aux_dummy()so that the logic can be used whether or not the event needs to be system-wide.Signed-off-by Adrian Hunter <[email protected]>--- tools/perf/util/evlist.c | 40 ++++++++++++++++++++++++++++++++++++++++ tools/perf/util/evlist.h | 5 +++++ 2 files changed, 45 insertions(+)tools/perf/util/evlist.c +40
-0@@ -264,6 +264,46 @@ int evlist__add_dummy(struct evlist *evlist)return 0 ; } +static void evlist__add_on_all_cpus (struct evlist *evlist,struct evsel *evsel) +{ + evsel->core.system_wide = true; + +/* All CPUs */ +perf_cpu_map__put (evsel->core.own_cpus); + evsel->core.own_cpus =perf_cpu_map__new (NULL ); +perf_cpu_map__put (evsel->core.cpus); + evsel->core.cpus =perf_cpu_map__get (evsel->core.own_cpus); + +/* No threads */ +perf_thread_map__put (evsel->core.threads); + evsel->core.threads =perf_thread_map__new_dummy (); + +evlist__add (evlist, evsel); +} + +struct evsel *evlist__add_aux_dummy (struct evlist *evlist,bool system_wide) +{ +struct evsel *evsel =evlist__dummy_event (evlist); + +if (!evsel) +return NULL ; + + evsel->core.attr.exclude_kernel =1 ; + evsel->core.attr.exclude_guest =1 ; + evsel->core.attr.exclude_hv =1 ; + evsel->core.attr.freq =0 ; + evsel->core.attr.sample_period =1 ; + evsel->no_aux_samples = true; + evsel->name =strdup ("dummy:u" ); + +if (system_wide) +evlist__add_on_all_cpus (evlist, evsel); +else +evlist__add (evlist, evsel); + +return evsel; +} +static int evlist__add_attrs (struct evlist *evlist,struct perf_event_attr *attrs,size_t nr_attrs) {struct evsel *evsel, *n;tools/perf/util/evlist.h +0
-0tools/perf/util/evlist.h int arch_evlist__add_default_attrs(struct evlist *evlist); · line 118
Quoted 5 lines
tools/perf/util/evlist.h +2
-0@@ -114,6 +114,11 @@ int arch_evlist__add_default_attrs(struct evlist *evlist);struct evsel *arch_evlist__leader (struct list_head *list);int evlist__add_dummy (struct evlist *evlist); +struct evsel *evlist__add_aux_dummy (struct evlist *evlist,bool system_wide); +static inline struct evsel *evlist__add_dummy_on_all_cpus (struct evlist *evlist)Sorry to be a language lawyer. What I hope to clean up with CPU maps is that:
Quoted 5 lines
empty == dummy == any CPU
https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/lib/perf/cpumap.c?h=perf/core#n279Given every CPU map should be empty or contain any CPU then it seems they all meet the definition of empty - so something is wrong.
Nothing is wrong. I am not against clarifying things, but stop assuming natural language has to mean anything exactly. That is what computer languages are for.
Sometimes more abstract language is used, precisely to stop people making assumptions about the details.
Quoted 13 lines
The cpu map here is explicitly opened so that it gets all online CPUs:
https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/lib/perf/cpumap.c?h=perf/core#n174From:
https://github.com/torvalds/linux/blob/master/Documentation/admin-guide/cputopology.rst
there are example topologies like:kernel_max: 31
offline: 2,4-31,32-63online: 0-1,3possible: 0-31
present: 0-31Quoted 9 lines
all_cpuscould mean the union of offline and online CPUs, possible CPUs or present CPUs. You are saying that in the perf codeall_cpusshould be the same as all online cpus as only those CPUs are valid withperf_event_open. That's true but offline CPUs can be made online. If that happens here then the dummy events will have a CPU map that rather than being for all CPUs will be for all online CPUs at the point it was opened. Having online in the function name I think captures the time dependent nature of this - but if you think that's too much could we add a comment?Quoted 5 lines
If you ask me it does the exact opposite. The function of the code is to put the event on all CPUS without having to know the details
of: well actually perf doesn't automagically retain or restore events across enabling or disabling CPUs so in fact we deal only in online CPUs.
Quoted 5 lines
But 'any CPU' (-1) could map to an offline CPU brought online. Calling this function twice could also result in this behavior. Via the topology documentation we have language to describe exactly the scenario that's happening and I'd prefer not to muddy that by making all and online synonyms.
In this case the caller wants all CPUs, not online CPUs. The detail that we can't trace offline CPUs that become online is not relevant to the caller. Why would the caller call a function limited to online CPUs when that is not what the caller wants.
Quoted 10 lines
Quoted 9 lines
Quoted 5 lines
too much could we add a comment? I'm trying to avoid a situation, like with the CPU map code, where all and online are interchangeable leading to the code being unnecessarily confusing unless you read every line.
It is normal to have to read the details of code, and, in my experience at least, normal for the code not to work exactly the way I'd imagined.
Quoted 10 lines
:-) The problem is that we all need to work with abstractions at some point, abstraction is pretty much the whole point of computer science. We need to fix CPU maps empty function, it is just a fundamental level of contradiction. As with the CPU map index being often mistaken for the CPU leading to bugs and crashes, I suspect remedying empty will fix existing and future bugs. With function naming the point is to be short and succinct, but also to be intention revealing for the sake of abstraction. Yes you need to read the code, but as with CPU map empty even that isn't enough and trying to infer behavior from usage can be a long and painful process.
You seem to be insisting that the function be named for its implementation (i.e. offline CPUs are not supported) not its purpose (trace system wide).
I can only suggest we go back to the original name, because the function has *nothing* to do with whether or not perf supports tracing per-cpu contexts on offline CPUs that become online.
Quoted 18 lines
Thanks,
IanQuoted 14 lines
Quoted 13 lines
Thanks,
IanQuoted 9 lines
tools/perf/util/evlist.h +3
-1+{ +return evlist__add_aux_dummy (evlist, true); +}int evlist__add_sb_event (struct evlist *evlist,struct perf_event_attr *attr,evsel__sb_cb_t cb,void *data); --2.25.1
Ian Rogers
reviewerRe: [PATCH V2 13/23] perf evlist: Add evlist__add_dummy_on_all_cpus()
Quoted 157 lines · Adrian Hunter
Quoted 123 lines · Ian Rogers
Quoted 116 lines · Adrian Hunter
Quoted 78 lines · Ian Rogers
Quoted 69 lines · Adrian Hunter
Add
evlist__add_dummy_on_all_cpus()to enable creating a system-wide dummy event that sets up the system-wide maps before map propagation.For convenience, add
evlist__add_aux_dummy()so that the logic can be used whether or not the event needs to be system-wide.Signed-off-by Adrian Hunter <[email protected]>--- tools/perf/util/evlist.c | 40 ++++++++++++++++++++++++++++++++++++++++ tools/perf/util/evlist.h | 5 +++++ 2 files changed, 45 insertions(+)tools/perf/util/evlist.c +40
-0@@ -264,6 +264,46 @@ int evlist__add_dummy(struct evlist *evlist)return 0 ; } +static void evlist__add_on_all_cpus (struct evlist *evlist,struct evsel *evsel) +{ + evsel->core.system_wide = true; + +/* All CPUs */ +perf_cpu_map__put (evsel->core.own_cpus); + evsel->core.own_cpus =perf_cpu_map__new (NULL ); +perf_cpu_map__put (evsel->core.cpus); + evsel->core.cpus =perf_cpu_map__get (evsel->core.own_cpus); + +/* No threads */ +perf_thread_map__put (evsel->core.threads); + evsel->core.threads =perf_thread_map__new_dummy (); + +evlist__add (evlist, evsel); +} + +struct evsel *evlist__add_aux_dummy (struct evlist *evlist,bool system_wide) +{ +struct evsel *evsel =evlist__dummy_event (evlist); + +if (!evsel) +return NULL ; + + evsel->core.attr.exclude_kernel =1 ; + evsel->core.attr.exclude_guest =1 ; + evsel->core.attr.exclude_hv =1 ; + evsel->core.attr.freq =0 ; + evsel->core.attr.sample_period =1 ; + evsel->no_aux_samples = true; + evsel->name =strdup ("dummy:u" ); + +if (system_wide) +evlist__add_on_all_cpus (evlist, evsel); +else +evlist__add (evlist, evsel); + +return evsel; +} +static int evlist__add_attrs (struct evlist *evlist,struct perf_event_attr *attrs,size_t nr_attrs) {struct evsel *evsel, *n;tools/perf/util/evlist.h +0
-0tools/perf/util/evlist.h int arch_evlist__add_default_attrs(struct evlist *evlist); · line 118
Quoted 5 lines
tools/perf/util/evlist.h +2
-0@@ -114,6 +114,11 @@ int arch_evlist__add_default_attrs(struct evlist *evlist);struct evsel *arch_evlist__leader (struct list_head *list);int evlist__add_dummy (struct evlist *evlist); +struct evsel *evlist__add_aux_dummy (struct evlist *evlist,bool system_wide); +static inline struct evsel *evlist__add_dummy_on_all_cpus (struct evlist *evlist)Sorry to be a language lawyer. What I hope to clean up with CPU maps is that:
Quoted 5 lines
empty == dummy == any CPU
https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/lib/perf/cpumap.c?h=perf/core#n279Given every CPU map should be empty or contain any CPU then it seems they all meet the definition of empty - so something is wrong.
Nothing is wrong. I am not against clarifying things, but stop assuming natural language has to mean anything exactly. That is what computer languages are for.
Sometimes more abstract language is used, precisely to stop people making assumptions about the details.
Quoted 13 lines
The cpu map here is explicitly opened so that it gets all online CPUs:
https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/lib/perf/cpumap.c?h=perf/core#n174From:
https://github.com/torvalds/linux/blob/master/Documentation/admin-guide/cputopology.rst
there are example topologies like:kernel_max: 31
offline: 2,4-31,32-63online: 0-1,3possible: 0-31
present: 0-31Quoted 9 lines
all_cpuscould mean the union of offline and online CPUs, possible CPUs or present CPUs. You are saying that in the perf codeall_cpusshould be the same as all online cpus as only those CPUs are valid withperf_event_open. That's true but offline CPUs can be made online. If that happens here then the dummy events will have a CPU map that rather than being for all CPUs will be for all online CPUs at the point it was opened. Having online in the function name I think captures the time dependent nature of this - but if you think that's too much could we add a comment?Quoted 5 lines
If you ask me it does the exact opposite. The function of the code is to put the event on all CPUS without having to know the details
of: well actually perf doesn't automagically retain or restore events across enabling or disabling CPUs so in fact we deal only in online CPUs.Quoted 5 lines
But 'any CPU' (-1) could map to an offline CPU brought online. Calling this function twice could also result in this behavior. Via the topology documentation we have language to describe exactly the scenario that's happening and I'd prefer not to muddy that by making all and online synonyms.
In this case the caller wants all CPUs, not online CPUs. The detail that we can't trace offline CPUs that become online is not relevant to the caller. Why would the caller call a function limited to online CPUs when that is not what the caller wants.
Quoted 10 lines
Quoted 9 lines
Quoted 5 lines
too much could we add a comment? I'm trying to avoid a situation, like with the CPU map code, where all and online are interchangeable leading to the code being unnecessarily confusing unless you read every line.
It is normal to have to read the details of code, and, in my experience at least, normal for the code not to work exactly the way I'd imagined.
Quoted 10 lines
:-) The problem is that we all need to work with abstractions at some point, abstraction is pretty much the whole point of computer science. We need to fix CPU maps empty function, it is just a fundamental level of contradiction. As with the CPU map index being often mistaken for the CPU leading to bugs and crashes, I suspect remedying empty will fix existing and future bugs. With function naming the point is to be short and succinct, but also to be intention revealing for the sake of abstraction. Yes you need to read the code, but as with CPU map empty even that isn't enough and trying to infer behavior from usage can be a long and painful process.
Quoted 7 lines
You seem to be insisting that the function be named for its implementation (i.e. offline CPUs are not supported) not its purpose (trace system wide).
I can only suggest we go back to the original name, because the function has *nothing* to do with whether or not perf supports tracing per-cpu contexts on offline CPUs that become online.
Hi Adrian,
Do you understand my concern for 'all' and 'online' not being synonyms for each other? When I read 'all' I assume online + offline, this function is explicitly just online and it didn't seem like a big ask to have that in the function name. My hope is to have intention revealing function names rather than to have to plod through code when things don't work as intended. In any case, I already said that a comment will suffice that in this context 'all' == 'online'. I'm keen to land this patch series as we clearly need to fix what is meant by 'empty' that is true for:
truly empty: {}
dummy/any: {-1}
dummy/any merged: {-1,0,1,2,3}
ie empty can mean any CPU, actual CPUs or none. I know I'm adopting the role of language lawyer in doing this but honestly we need this fixed, and my hope is with tests on it.
Thanks,
Ian
Quoted 19 lines
Quoted 18 lines
Thanks,
IanQuoted 14 lines
Quoted 13 lines
Thanks,
IanQuoted 9 lines
tools/perf/util/evlist.h +3
-1+{ +return evlist__add_aux_dummy (evlist, true); +}int evlist__add_sb_event (struct evlist *evlist,struct perf_event_attr *attr,evsel__sb_cb_t cb,void *data); --2.25.1
Arnaldo Carvalho de Melo
maintainerRe: [PATCH V2 13/23] perf evlist: Add evlist__add_dummy_on_all_cpus()
In reply to Adrian HunterEm Tue, May 10, 2022 at 05:55:34PM +0300, Adrian Hunter escreveu:
Quoted 130 lines · Ian Rogers
Quoted 123 lines · Adrian Hunter
Quoted 116 lines · Ian Rogers
Quoted 78 lines · Adrian Hunter
Quoted 69 lines
Add
evlist__add_dummy_on_all_cpus()to enable creating a system-wide dummy event that sets up the system-wide maps before map propagation.For convenience, add
evlist__add_aux_dummy()so that the logic can be used whether or not the event needs to be system-wide.Signed-off-by Adrian Hunter <[email protected]>--- tools/perf/util/evlist.c | 40 ++++++++++++++++++++++++++++++++++++++++ tools/perf/util/evlist.h | 5 +++++ 2 files changed, 45 insertions(+)tools/perf/util/evlist.c +40
-0@@ -264,6 +264,46 @@ int evlist__add_dummy(struct evlist *evlist)return 0 ; } +static void evlist__add_on_all_cpus (struct evlist *evlist,struct evsel *evsel) +{ + evsel->core.system_wide = true; + +/* All CPUs */ +perf_cpu_map__put (evsel->core.own_cpus); + evsel->core.own_cpus =perf_cpu_map__new (NULL ); +perf_cpu_map__put (evsel->core.cpus); + evsel->core.cpus =perf_cpu_map__get (evsel->core.own_cpus); + +/* No threads */ +perf_thread_map__put (evsel->core.threads); + evsel->core.threads =perf_thread_map__new_dummy (); + +evlist__add (evlist, evsel); +} + +struct evsel *evlist__add_aux_dummy (struct evlist *evlist,bool system_wide) +{ +struct evsel *evsel =evlist__dummy_event (evlist); + +if (!evsel) +return NULL ; + + evsel->core.attr.exclude_kernel =1 ; + evsel->core.attr.exclude_guest =1 ; + evsel->core.attr.exclude_hv =1 ; + evsel->core.attr.freq =0 ; + evsel->core.attr.sample_period =1 ; + evsel->no_aux_samples = true; + evsel->name =strdup ("dummy:u" ); + +if (system_wide) +evlist__add_on_all_cpus (evlist, evsel); +else +evlist__add (evlist, evsel); + +return evsel; +} +static int evlist__add_attrs (struct evlist *evlist,struct perf_event_attr *attrs,size_t nr_attrs) {struct evsel *evsel, *n;tools/perf/util/evlist.h +0
-0tools/perf/util/evlist.h int arch_evlist__add_default_attrs(struct evlist *evlist); · line 118
Quoted 5 lines
tools/perf/util/evlist.h +2
-0@@ -114,6 +114,11 @@ int arch_evlist__add_default_attrs(struct evlist *evlist);struct evsel *arch_evlist__leader (struct list_head *list);int evlist__add_dummy (struct evlist *evlist); +struct evsel *evlist__add_aux_dummy (struct evlist *evlist,bool system_wide); +static inline struct evsel *evlist__add_dummy_on_all_cpus (struct evlist *evlist)Sorry to be a language lawyer. What I hope to clean up with CPU maps is that:
Quoted 5 lines
empty == dummy == any CPU
https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/lib/perf/cpumap.c?h=perf/core#n279Given every CPU map should be empty or contain any CPU then it seems they all meet the definition of empty - so something is wrong.
Nothing is wrong. I am not against clarifying things, but stop assuming natural language has to mean anything exactly. That is what computer languages are for.
Sometimes more abstract language is used, precisely to stop people making assumptions about the details.
Quoted 13 lines
The cpu map here is explicitly opened so that it gets all online CPUs:
https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/lib/perf/cpumap.c?h=perf/core#n174From:
https://github.com/torvalds/linux/blob/master/Documentation/admin-guide/cputopology.rst
there are example topologies like:kernel_max: 31
offline: 2,4-31,32-63online: 0-1,3possible: 0-31
present: 0-31Quoted 9 lines
all_cpuscould mean the union of offline and online CPUs, possible CPUs or present CPUs. You are saying that in the perf codeall_cpusshould be the same as all online cpus as only those CPUs are valid withperf_event_open. That's true but offline CPUs can be made online. If that happens here then the dummy events will have a CPU map that rather than being for all CPUs will be for all online CPUs at the point it was opened. Having online in the function name I think captures the time dependent nature of this - but if you think that's too much could we add a comment?Quoted 5 lines
If you ask me it does the exact opposite. The function of the code is to put the event on all CPUS without having to know the details
of: well actually perf doesn't automagically retain or restore events across enabling or disabling CPUs so in fact we deal only in online CPUs.Quoted 5 lines
But 'any CPU' (-1) could map to an offline CPU brought online. Calling this function twice could also result in this behavior. Via the topology documentation we have language to describe exactly the scenario that's happening and I'd prefer not to muddy that by making all and online synonyms.
Quoted 4 lines
In this case the caller wants all CPUs, not online CPUs. The detail that we can't trace offline CPUs that become online is not relevant to the caller. Why would the caller call a function limited to online CPUs when that is not what the caller wants.
Agreed, the intention is for all CPUs to be traced, so all that can be traced should be traced, at the time of the call to this function.
An improvement, that would change the workings of this function, but that would still do what was asked, would be to have functionality that remembers such requestgs for tracing all CPUs and when a CPU that was offline is brought online, gets that CPU added to whoever asked for all CPUs to be traced.
If this is something critical to the caller, then perhaps it should provide a callback for when CPUs are made online (or offline).
But then we can add that functionality when the need arises?
- Arnaldo
Quoted 46 lines
Quoted 9 lines
Quoted 8 lines
Quoted 4 lines
too much could we add a comment? I'm trying to avoid a situation, like with the CPU map code, where all and online are interchangeable leading to the code being unnecessarily confusing unless you read every line.
It is normal to have to read the details of code, and, in my experience at least, normal for the code not to work exactly the way I'd imagined.
Quoted 10 lines
:-) The problem is that we all need to work with abstractions at some point, abstraction is pretty much the whole point of computer science. We need to fix CPU maps empty function, it is just a fundamental level of contradiction. As with the CPU map index being often mistaken for the CPU leading to bugs and crashes, I suspect remedying empty will fix existing and future bugs. With function naming the point is to be short and succinct, but also to be intention revealing for the sake of abstraction. Yes you need to read the code, but as with CPU map empty even that isn't enough and trying to infer behavior from usage can be a long and painful process.
You seem to be insisting that the function be named for its implementation (i.e. offline CPUs are not supported) not its purpose (trace system wide).
I can only suggest we go back to the original name, because the function has *nothing* to do with whether or not perf supports tracing per-cpu contexts on offline CPUs that become online.
Quoted 18 lines
Thanks,
IanQuoted 14 lines
Quoted 13 lines
Thanks,
IanQuoted 9 lines
tools/perf/util/evlist.h +3
-1+{ +return evlist__add_aux_dummy (evlist, true); +}int evlist__add_sb_event (struct evlist *evlist,struct perf_event_attr *attr,evsel__sb_cb_t cb,void *data); --2.25.1
Signature · 1 line
- Arnaldo
Arnaldo Carvalho de Melo
maintainerRe: [PATCH V2 01/23] perf intel-pt: Add a test for system-wide side band
In reply to Adrian HunterEm Fri, May 06, 2022 at 03:25:39PM +0300, Adrian Hunter escreveu:
Quoted 4 lines
Add a test for system-wide side band even when tracing selected CPUs.
Tested-by Ian Rogers <[email protected]>Signed-off-by Adrian Hunter <[email protected]>
[root@quaco ~]# uname -a
Linux quaco 5.16.13-200.fc35.x86_64 #1 SMP PREEMPT Tue Mar 8 22:50:58 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux [root@quaco ~]# grep -m1 -i "model name" /proc/cpuinfo
model name : Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz
[root@quaco ~]# perf test -v Misc
97: Miscellaneous Intel PT testing :
--- start ---
test child forked, pid 769475
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.352 MB /tmp/tmp.Ty4Rqnz4vz ]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.352 MB /tmp/tmp.Ty4Rqnz4vz ]
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.446 MB /tmp/tmp.TnEqenwzZv ]
Failed to record MMAP events on CPU 1 when tracing CPU 0
test child finished with -1
---- end ----
Miscellaneous Intel PT testing: FAILED!
[root@quaco ~]#
Do I need some more recent machine or kernel?
- Arnaldo
Quoted 84 lines
--- tools/perf/tests/shell/test_intel_pt.sh | 71 +++++++++++++++++++++++++ 1 file changed, 71 insertions(+) create mode 100755 tools/perf/tests/shell/test_intel_pt.shtools/perf/tests/shell/test_intel_pt.sh new file +71
-0@@ -0,0 +1,71 @@ +#!/bin/sh +# Miscellaneous Intel PT testing +# SPDX-License-Identifier: GPL-2.0 + +set -e + +# Skip if no Intel PT +perf list | grep -q 'intel_pt//' || exit 2 + +skip_cnt=0 +ok_cnt=0 +err_cnt=0 + +tmpfile=`mktemp` +perfdatafile=`mktemp` + +can_cpu_wide() +{ + perf record -o ${tmpfile} -B -N --no-bpf-event -e dummy:u -C $1 true 2>&1 >/dev/null || return 2 + return 0 +} + +test_system_wide_side_band() +{ + # Need CPU 0 and CPU 1 + can_cpu_wide 0 || return $? + can_cpu_wide 1 || return $? + + # Record on CPU 0 a task running on CPU 1 + perf record -B -N --no-bpf-event -o ${perfdatafile} -e intel_pt//u -C 0 -- taskset --cpu-list 1 uname + + # Should get MMAP events from CPU 1 because they can be needed to decode + mmap_cnt=`perf script -i ${perfdatafile} --no-itrace --show-mmap-events -C 1 2>/dev/null | grep MMAP | wc -l` + + if [ ${mmap_cnt} -gt 0 ] ; then + return 0 + fi + + echo "Failed to record MMAP events on CPU 1 when tracing CPU 0" + return 1 +} + +count_result() +{ + if [ $1 -eq 2 ] ; then + skip_cnt=`expr ${skip_cnt} \+ 1` + return + fi + if [ $1 -eq 0 ] ; then + ok_cnt=`expr ${ok_cnt} \+ 1` + return + fi + err_cnt=`expr ${err_cnt} \+ 1` +} + +test_system_wide_side_band + +count_result $? + +rm -f ${tmpfile} +rm -f ${perfdatafile} + +if [ ${err_cnt} -gt 0 ] ; then + exit 1 +fi + +if [ ${ok_cnt} -gt 0 ] ; then + exit 0 +fi + +exit 2Signature · 1 line
2.25.1
Signature · 1 line
- Arnaldo
Re: [PATCH V2 02/23] libperf evsel: Add perf_evsel__enable_thread()
In reply to Adrian HunterEm Fri, May 06, 2022 at 03:25:40PM +0300, Adrian Hunter escreveu:
Quoted 2 lines
Add
perf_evsel__enable_thread()as a counterpart toperf_evsel__enable_cpu(), to enable all events for a thread.
Thanks, applied.
- Arnaldo
Quoted 46 lines
Signed-off-by Adrian Hunter <[email protected]>--- tools/lib/perf/evsel.c | 15 +++++++++++++++ tools/lib/perf/include/perf/evsel.h | 1 + 2 files changed, 16 insertions(+)tools/lib/perf/evsel.c +15
-0@@ -360,6 +360,21 @@ int perf_evsel__enable_cpu(struct perf_evsel *evsel, int cpu_map_idx)return perf_evsel__run_ioctl (evsel,PERF_EVENT_IOC_ENABLE ,NULL , cpu_map_idx); } +int perf_evsel__enable_thread (struct perf_evsel *evsel,int thread) +{ +struct perf_cpu cpu__maybe_unused ; +int idx; +int err; + +perf_cpu_map__for_each_cpu (cpu, idx, evsel->cpus) { + err =perf_evsel__ioctl (evsel,PERF_EVENT_IOC_ENABLE ,NULL , idx, thread); +if (err) +return err; + } + +return 0 ; +} +int perf_evsel__enable (struct perf_evsel *evsel) {int i;tools/lib/perf/include/perf/evsel.h +1
-0@@ -36,6 +36,7 @@ LIBPERF_API int perf_evsel__read(struct perf_evsel *evsel, int cpu_map_idx, int struct perf_counts_values *count); LIBPERF_API int perf_evsel__enable(struct perf_evsel *evsel); LIBPERF_API int perf_evsel__enable_cpu(struct perf_evsel *evsel, int cpu_map_idx); +LIBPERF_API int perf_evsel__enable_thread(struct perf_evsel *evsel, int thread); LIBPERF_API int perf_evsel__disable(struct perf_evsel *evsel); LIBPERF_API int perf_evsel__disable_cpu(struct perf_evsel *evsel, int cpu_map_idx); LIBPERF_API struct perf_cpu_map *perf_evsel__cpus(struct perf_evsel *evsel);Signature · 1 line
2.25.1
Signature · 1 line
- Arnaldo
Adrian Hunter
reviewerRe: [PATCH V2 01/23] perf intel-pt: Add a test for system-wide side band
In reply to Arnaldo Carvalho de MeloQuoted 28 lines · Arnaldo Carvalho de Melo
Em Fri, May 06, 2022 at 03:25:39PM +0300, Adrian Hunter escreveu:
Quoted 4 lines
Add a test for system-wide side band even when tracing selected CPUs.
Tested-by Ian Rogers <[email protected]>Signed-off-by Adrian Hunter <[email protected]>[root@quaco ~]# uname -a
Linux quaco 5.16.13-200.fc35.x86_64 #1 SMP PREEMPT Tue Mar 8 22:50:58 UTC 2022x86_64x86_64x86_64GNU/Linux [root@quaco ~]# grep -m1 -i "model name"/proc/cpuinfo
model name : Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz
[root@quaco ~]# perf test -v Misc
97: Miscellaneous Intel PT testing :
--- start ---
test child forked, pid 769475
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.352 MB/tmp/tmp.Ty4Rqnz4vz]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.352 MB/tmp/tmp.Ty4Rqnz4vz]
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.446 MB/tmp/tmp.TnEqenwzZv]
Failed to record MMAP events on CPU 1 when tracing CPU 0
test child finished with -1
---- end ----
Miscellaneous Intel PT testing: FAILED!
[root@quaco ~]#
Quoted 1 line
Do I need some more recent machine or kernel?
I put it only in the cover letter sorry but "The first patch is a small Intel PT test for system-wide side band. The test fails before the patches are applied, passed afterwards."
Re: [PATCH V2 03/23] perf evlist: Use libperf functions in evlist__enable_event_idx()
In reply to Adrian HunterEm Fri, May 06, 2022 at 03:25:41PM +0300, Adrian Hunter escreveu:
Quoted 5 lines
evlist__enable_event_idx()is used only for auxtrace events which are neversystem_wide. Simplify by using libperf enable event functions.Acked-by Ian Rogers <[email protected]>Signed-off-by Adrian Hunter <[email protected]>
Thanks, applied.
- Arnaldo
Quoted 74 lines
--- tools/perf/util/evlist.c | 44 ++-------------------------------------- 1 file changed, 2 insertions(+), 42 deletions(-)tools/perf/util/evlist.c +2
-42@@ -334,14 +334,6 @@ int evlist__add_newtp(struct evlist *evlist, const char *sys, const char *name,return 0 ; } -static int evlist__nr_threads (struct evlist *evlist,struct evsel *evsel) -{ -if (evsel->core.system_wide) -return 1 ; -else -return perf_thread_map__nr (evlist->core.threads); -} -struct evlist_cpu_iterator evlist__cpu_begin (struct evlist *evlist,struct affinity *affinity) {struct evlist_cpu_iterator itr = {@@ -546,46 +538,14 @@ void evlist__toggle_enable(struct evlist *evlist) (evlist->enabled ? evlist__disable : evlist__enable)(evlist); } -static int evlist__enable_event_cpu (struct evlist *evlist,struct evsel *evsel,int cpu) -{ -int thread; -int nr_threads =evlist__nr_threads (evlist, evsel); - -if (!evsel->core.fd) -return -EINVAL ; - -for (thread =0 ; thread < nr_threads; thread++) { -int err =ioctl (FD (evsel, cpu, thread),PERF_EVENT_IOC_ENABLE ,0 ); -if (err) -return err; - } -return 0 ; -} - -static int evlist__enable_event_thread (struct evlist *evlist,struct evsel *evsel,int thread) -{ -int cpu; -int nr_cpus =perf_cpu_map__nr (evlist->core.user_requested_cpus); - -if (!evsel->core.fd) -return -EINVAL ; - -for (cpu =0 ; cpu < nr_cpus; cpu++) { -int err =ioctl (FD (evsel, cpu, thread),PERF_EVENT_IOC_ENABLE ,0 ); -if (err) -return err; - } -return 0 ; -} -int evlist__enable_event_idx (struct evlist *evlist,struct evsel *evsel,int idx) {bool per_cpu_mmaps = !perf_cpu_map__empty (evlist->core.user_requested_cpus);if (per_cpu_mmaps) -return evlist__enable_event_cpu (evlist, evsel, idx); +return perf_evsel__enable_cpu (&evsel->core, idx); -return evlist__enable_event_thread (evlist, evsel, idx); +return perf_evsel__enable_thread (&evsel->core, idx); }int evlist__add_pollfd (struct evlist *evlist,int fd)Signature · 1 line
2.25.1
Signature · 1 line
- Arnaldo
Re: [PATCH V2 04/23] perf auxtrace: Move evlist__enable_event_idx() to auxtrace.c
In reply to Adrian HunterEm Fri, May 06, 2022 at 03:25:42PM +0300, Adrian Hunter escreveu:
Quoted 5 lines
evlist__enable_event_idx()is used only by auxtrace. Move it toauxtrace.cin preparation for making it even more auxtrace specific.Acked-by Ian Rogers <[email protected]>Signed-off-by Adrian Hunter <[email protected]>
Thanks, applied.
- Arnaldo
Quoted 63 lines
--- tools/perf/util/auxtrace.c | 10 ++++++++++ tools/perf/util/evlist.c | 10 ---------- tools/perf/util/evlist.h | 2 -- 3 files changed, 10 insertions(+), 12 deletions(-)tools/perf/util/auxtrace.c +10
-0@@ -636,6 +636,16 @@ int auxtrace_parse_snapshot_options(struct auxtrace_record *itr,return -EINVAL ; } +static int evlist__enable_event_idx (struct evlist *evlist,struct evsel *evsel,int idx) +{ +bool per_cpu_mmaps = !perf_cpu_map__empty (evlist->core.user_requested_cpus); + +if (per_cpu_mmaps) +return perf_evsel__enable_cpu (&evsel->core, idx); + +return perf_evsel__enable_thread (&evsel->core, idx); +} +int auxtrace_record__read_finish (struct auxtrace_record *itr,int idx) {struct evsel *evsel;tools/perf/util/evlist.c +0
-10@@ -538,16 +538,6 @@ void evlist__toggle_enable(struct evlist *evlist) (evlist->enabled ? evlist__disable : evlist__enable)(evlist); } -int evlist__enable_event_idx (struct evlist *evlist,struct evsel *evsel,int idx) -{ -bool per_cpu_mmaps = !perf_cpu_map__empty (evlist->core.user_requested_cpus); - -if (per_cpu_mmaps) -return perf_evsel__enable_cpu (&evsel->core, idx); - -return perf_evsel__enable_thread (&evsel->core, idx); -} -int evlist__add_pollfd (struct evlist *evlist,int fd) {return perf_evlist__add_pollfd (&evlist->core, fd,NULL ,POLLIN , fdarray_flag__default);tools/perf/util/evlist.h +0
-2@@ -196,8 +196,6 @@ void evlist__toggle_enable(struct evlist *evlist);void evlist__disable_evsel (struct evlist *evlist,char *evsel_name);void evlist__enable_evsel (struct evlist *evlist,char *evsel_name); -int evlist__enable_event_idx (struct evlist *evlist,struct evsel *evsel,int idx); -void evlist__set_selected (struct evlist *evlist,struct evsel *evsel);int evlist__create_maps (struct evlist *evlist,struct target *target);Signature · 1 line
2.25.1
Signature · 1 line
- Arnaldo
Re: [PATCH V2 05/23] perf auxtrace: Do not mix up mmap idx
In reply to Adrian HunterEm Fri, May 06, 2022 at 03:25:43PM +0300, Adrian Hunter escreveu:
Quoted 7 lines
The idx is with respect to evlist not evsel. That hasn't mattered because they are the same at present. Prepare for that not being the case, which it won't be when sideband tracking events are allowed on all CPUs even when auxtrace is limited to selected CPUs.
Acked-by Ian Rogers <[email protected]>Signed-off-by Adrian Hunter <[email protected]>
Thanks, applied.
- Arnaldo
Quoted 27 lines
--- tools/perf/util/auxtrace.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)tools/perf/util/auxtrace.c +8
-2@@ -640,8 +640,14 @@ static int evlist__enable_event_idx(struct evlist *evlist, struct evsel *evsel, {bool per_cpu_mmaps = !perf_cpu_map__empty (evlist->core.user_requested_cpus); -if (per_cpu_mmaps) -return perf_evsel__enable_cpu (&evsel->core, idx); +if (per_cpu_mmaps) { +struct perf_cpu evlist_cpu =perf_cpu_map__cpu (evlist->core.all_cpus, idx); +int cpu_map_idx =perf_cpu_map__idx (evsel->core.cpus, evlist_cpu); + +if (cpu_map_idx ==-1 ) +return -EINVAL ; +return perf_evsel__enable_cpu (&evsel->core, cpu_map_idx); + }return perf_evsel__enable_thread (&evsel->core, idx); }Signature · 1 line
2.25.1
Signature · 1 line
- Arnaldo
Re: [PATCH V2 06/23] libperf evlist: Remove ->idx() per_cpu parameter
In reply to Adrian HunterEm Fri, May 06, 2022 at 03:25:44PM +0300, Adrian Hunter escreveu:
Quoted 4 lines
Remove ->idx()
per_cpuparameter because it isn't needed.Acked-by Ian Rogers <[email protected]>Signed-off-by Adrian Hunter <[email protected]>
Thanks, applied.
- Arnaldo
Quoted 60 lines
--- tools/lib/perf/evlist.c | 4 ++-- tools/lib/perf/include/internal/evlist.h | 2 +- tools/perf/util/evlist.c | 3 ++- 3 files changed, 5 insertions(+), 4 deletions(-)tools/lib/perf/evlist.c +2
-2@@ -521,7 +521,7 @@ mmap_per_thread(struct perf_evlist *evlist, struct perf_evlist_mmap_ops *ops,int output_overwrite =-1 ;if (ops->idx) - ops->idx (evlist, mp, thread, false); + ops->idx (evlist, mp, thread);if (mmap_per_evsel (evlist, ops, thread, mp,0 , thread, &output, &output_overwrite))@@ -548,7 +548,7 @@ mmap_per_cpu(struct perf_evlist *evlist, struct perf_evlist_mmap_ops *ops,int output_overwrite =-1 ;if (ops->idx) - ops->idx (evlist, mp, cpu, true); + ops->idx (evlist, mp, cpu);for (thread =0 ; thread < nr_threads; thread++) { if (mmap_per_evsel(evlist, ops, cpu, mp, cpu,tools/lib/perf/include/internal/evlist.h +1
-1@@ -38,7 +38,7 @@ struct perf_evlist { };typedef void -(*perf_evlist_mmap__cb_idx_t )(struct perf_evlist *,struct perf_mmap_param *,int ,bool ); +(*perf_evlist_mmap__cb_idx_t )(struct perf_evlist *,struct perf_mmap_param *,int );typedef struct perf_mmap * (*perf_evlist_mmap__cb_get_t )(struct perf_evlist *,bool ,int ); typedef inttools/perf/util/evlist.c +2
-1@@ -748,10 +748,11 @@ static struct mmap *evlist__alloc_mmap(struct evlist *evlist,static void perf_evlist__mmap_cb_idx (struct perf_evlist *_evlist,struct perf_mmap_param *_mp, -int idx,bool per_cpu) +int idx) { struct evlist *evlist = container_of(_evlist, struct evlist, core); struct mmap_params *mp = container_of(_mp, struct mmap_params, core); +bool per_cpu = !perf_cpu_map__empty (_evlist->user_requested_cpus);auxtrace_mmap_params__set_idx (&mp->auxtrace_mp, evlist, idx, per_cpu); }Signature · 1 line
2.25.1
Signature · 1 line
- Arnaldo
Re: [PATCH V2 07/23] libperf evlist: Move ->idx() into mmap_per_evsel()
In reply to Adrian HunterEm Fri, May 06, 2022 at 03:25:45PM +0300, Adrian Hunter escreveu:
Quoted 5 lines
Move ->idx() into
mmap_per_evsel()in preparation for adding evsel as a parameter.Acked-by Ian Rogers <[email protected]>Signed-off-by Adrian Hunter <[email protected]>
Thanks, applied.
- Arnaldo
Quoted 40 lines
--- tools/lib/perf/evlist.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-)tools/lib/perf/evlist.c +3
-6@@ -478,6 +478,9 @@ mmap_per_evsel(struct perf_evlist *evlist, struct perf_evlist_mmap_ops *ops,*/ refcount_set (&map->refcnt,2 ); +if (ops->idx) + ops->idx (evlist, mp, idx); +if (ops->mmap (map, mp, *output, evlist_cpu) <0 )return -1 ;@@ -520,9 +523,6 @@ mmap_per_thread(struct perf_evlist *evlist, struct perf_evlist_mmap_ops *ops,int output =-1 ;int output_overwrite =-1 ; -if (ops->idx) - ops->idx (evlist, mp, thread); -if (mmap_per_evsel (evlist, ops, thread, mp,0 , thread, &output, &output_overwrite)) goto out_unmap;@@ -547,9 +547,6 @@ mmap_per_cpu(struct perf_evlist *evlist, struct perf_evlist_mmap_ops *ops,int output =-1 ;int output_overwrite =-1 ; -if (ops->idx) - ops->idx (evlist, mp, cpu); -for (thread =0 ; thread < nr_threads; thread++) {if (mmap_per_evsel (evlist, ops, cpu, mp, cpu, thread, &output, &output_overwrite))Signature · 1 line
2.25.1
Signature · 1 line
- Arnaldo
Re: [PATCH V2 08/23] libperf evlist: Add evsel as a parameter to ->idx()
In reply to Adrian HunterEm Fri, May 06, 2022 at 03:25:46PM +0300, Adrian Hunter escreveu:
Quoted 5 lines
Add evsel as a parameter to ->idx() in preparation for correctly determining whether an auxtrace mmap is needed.
Acked-by Ian Rogers <[email protected]>Signed-off-by Adrian Hunter <[email protected]>
Thanks, applied.
- Arnaldo
Quoted 47 lines
--- tools/lib/perf/evlist.c | 2 +- tools/lib/perf/include/internal/evlist.h | 3 ++- tools/perf/util/evlist.c | 1 + 3 files changed, 4 insertions(+), 2 deletions(-)tools/lib/perf/evlist.c +1
-1@@ -479,7 +479,7 @@ mmap_per_evsel(struct perf_evlist *evlist, struct perf_evlist_mmap_ops *ops,refcount_set (&map->refcnt,2 );if (ops->idx) - ops->idx (evlist, mp, idx); + ops->idx (evlist, evsel, mp, idx);if (ops->mmap (map, mp, *output, evlist_cpu) <0 )return -1 ;tools/lib/perf/include/internal/evlist.h +2
-1@@ -38,7 +38,8 @@ struct perf_evlist { };typedef void -(*perf_evlist_mmap__cb_idx_t )(struct perf_evlist *,struct perf_mmap_param *,int ); +(*perf_evlist_mmap__cb_idx_t )(struct perf_evlist *,struct perf_evsel *, +struct perf_mmap_param *,int );typedef struct perf_mmap * (*perf_evlist_mmap__cb_get_t )(struct perf_evlist *,bool ,int ); typedef inttools/perf/util/evlist.c +1
-0@@ -747,6 +747,7 @@ static struct mmap *evlist__alloc_mmap(struct evlist *evlist,static void perf_evlist__mmap_cb_idx (struct perf_evlist *_evlist, +struct perf_evsel *_evsel__maybe_unused ,struct perf_mmap_param *_mp,int idx) {Signature · 1 line
2.25.1
Signature · 1 line
- Arnaldo
Re: [PATCH V2 09/23] perf auxtrace: Record whether an auxtrace mmap is needed
In reply to Adrian HunterEm Fri, May 06, 2022 at 03:25:47PM +0300, Adrian Hunter escreveu:
Quoted 3 lines
Add a flag
needs_auxtrace_mmapto record whether an auxtrace mmap is needed, in preparation for correctly determining whether or not an auxtrace mmap is needed.
Thanks, applied.
- Arnaldo
Quoted 86 lines
Acked-by Ian Rogers <[email protected]>Signed-off-by Adrian Hunter <[email protected]>--- tools/perf/arch/arm/util/cs-etm.c | 1 + tools/perf/arch/arm64/util/arm-spe.c | 1 + tools/perf/arch/s390/util/auxtrace.c | 1 + tools/perf/arch/x86/util/intel-bts.c | 1 + tools/perf/arch/x86/util/intel-pt.c | 1 + tools/perf/util/evsel.h | 1 + 6 files changed, 6 insertions(+)tools/perf/arch/arm/util/cs-etm.c +1
-0@@ -319,6 +319,7 @@ static int cs_etm_recording_options(struct auxtrace_record *itr, } evsel->core.attr.freq =0 ; evsel->core.attr.sample_period =1 ; + evsel->needs_auxtrace_mmap = true; cs_etm_evsel = evsel; opts->full_auxtrace = true; }tools/perf/arch/arm64/util/arm-spe.c +1
-0@@ -160,6 +160,7 @@ static int arm_spe_recording_options(struct auxtrace_record *itr, } evsel->core.attr.freq =0 ; evsel->core.attr.sample_period = arm_spe_pmu->default_config->sample_period; + evsel->needs_auxtrace_mmap = true; arm_spe_evsel = evsel; opts->full_auxtrace = true; }tools/perf/arch/s390/util/auxtrace.c +1
-0@@ -98,6 +98,7 @@ struct auxtrace_record *auxtrace_record__init(struct evlist *evlist,evlist__for_each_entry (evlist, pos) {if (pos->core.attr.config ==PERF_EVENT_CPUM_SF_DIAG ) { diagnose =1 ; + pos->needs_auxtrace_mmap = true;break ; } }tools/perf/arch/x86/util/intel-bts.c +1
-0@@ -129,6 +129,7 @@ static int intel_bts_recording_options(struct auxtrace_record *itr, } evsel->core.attr.freq =0 ; evsel->core.attr.sample_period =1 ; + evsel->needs_auxtrace_mmap = true; intel_bts_evsel = evsel; opts->full_auxtrace = true; }tools/perf/arch/x86/util/intel-pt.c +1
-0@@ -649,6 +649,7 @@ static int intel_pt_recording_options(struct auxtrace_record *itr, evsel->core.attr.freq =0 ; evsel->core.attr.sample_period =1 ; evsel->no_aux_samples = true; + evsel->needs_auxtrace_mmap = true; intel_pt_evsel = evsel; opts->full_auxtrace = true; }tools/perf/util/evsel.h +1
-0@@ -124,6 +124,7 @@ struct evsel {bool merged_stat;bool reset_group;bool errored; +bool needs_auxtrace_mmap;struct hashmap *per_pkg_mask;int err;struct {Signature · 1 line
2.25.1
Signature · 1 line
- Arnaldo
Adrian Hunter
reviewerRe: [PATCH V2 13/23] perf evlist: Add evlist__add_dummy_on_all_cpus()
In reply to Arnaldo Carvalho de MeloQuoted 145 lines · Arnaldo Carvalho de Melo
Em Tue, May 10, 2022 at 05:55:34PM +0300, Adrian Hunter escreveu:
Quoted 130 lines · Ian Rogers
Quoted 123 lines · Adrian Hunter
Quoted 116 lines · Ian Rogers
Quoted 78 lines · Adrian Hunter
Quoted 69 lines
Add
evlist__add_dummy_on_all_cpus()to enable creating a system-wide dummy event that sets up the system-wide maps before map propagation.For convenience, add
evlist__add_aux_dummy()so that the logic can be used whether or not the event needs to be system-wide.Signed-off-by Adrian Hunter <[email protected]>--- tools/perf/util/evlist.c | 40 ++++++++++++++++++++++++++++++++++++++++ tools/perf/util/evlist.h | 5 +++++ 2 files changed, 45 insertions(+)tools/perf/util/evlist.c +40
-0@@ -264,6 +264,46 @@ int evlist__add_dummy(struct evlist *evlist)return 0 ; } +static void evlist__add_on_all_cpus (struct evlist *evlist,struct evsel *evsel) +{ + evsel->core.system_wide = true; + +/* All CPUs */ +perf_cpu_map__put (evsel->core.own_cpus); + evsel->core.own_cpus =perf_cpu_map__new (NULL ); +perf_cpu_map__put (evsel->core.cpus); + evsel->core.cpus =perf_cpu_map__get (evsel->core.own_cpus); + +/* No threads */ +perf_thread_map__put (evsel->core.threads); + evsel->core.threads =perf_thread_map__new_dummy (); + +evlist__add (evlist, evsel); +} + +struct evsel *evlist__add_aux_dummy (struct evlist *evlist,bool system_wide) +{ +struct evsel *evsel =evlist__dummy_event (evlist); + +if (!evsel) +return NULL ; + + evsel->core.attr.exclude_kernel =1 ; + evsel->core.attr.exclude_guest =1 ; + evsel->core.attr.exclude_hv =1 ; + evsel->core.attr.freq =0 ; + evsel->core.attr.sample_period =1 ; + evsel->no_aux_samples = true; + evsel->name =strdup ("dummy:u" ); + +if (system_wide) +evlist__add_on_all_cpus (evlist, evsel); +else +evlist__add (evlist, evsel); + +return evsel; +} +static int evlist__add_attrs (struct evlist *evlist,struct perf_event_attr *attrs,size_t nr_attrs) {struct evsel *evsel, *n;tools/perf/util/evlist.h +0
-0tools/perf/util/evlist.h int arch_evlist__add_default_attrs(struct evlist *evlist); · line 118
Quoted 5 lines
tools/perf/util/evlist.h +2
-0@@ -114,6 +114,11 @@ int arch_evlist__add_default_attrs(struct evlist *evlist);struct evsel *arch_evlist__leader (struct list_head *list);int evlist__add_dummy (struct evlist *evlist); +struct evsel *evlist__add_aux_dummy (struct evlist *evlist,bool system_wide); +static inline struct evsel *evlist__add_dummy_on_all_cpus (struct evlist *evlist)Sorry to be a language lawyer. What I hope to clean up with CPU maps is that:
Quoted 5 lines
empty == dummy == any CPU
https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/lib/perf/cpumap.c?h=perf/core#n279Given every CPU map should be empty or contain any CPU then it seems they all meet the definition of empty - so something is wrong.
Nothing is wrong. I am not against clarifying things, but stop assuming natural language has to mean anything exactly. That is what computer languages are for.
Sometimes more abstract language is used, precisely to stop people making assumptions about the details.
Quoted 13 lines
The cpu map here is explicitly opened so that it gets all online CPUs:
https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/lib/perf/cpumap.c?h=perf/core#n174From:
https://github.com/torvalds/linux/blob/master/Documentation/admin-guide/cputopology.rst
there are example topologies like:kernel_max: 31
offline: 2,4-31,32-63online: 0-1,3possible: 0-31
present: 0-31Quoted 9 lines
all_cpuscould mean the union of offline and online CPUs, possible CPUs or present CPUs. You are saying that in the perf codeall_cpusshould be the same as all online cpus as only those CPUs are valid withperf_event_open. That's true but offline CPUs can be made online. If that happens here then the dummy events will have a CPU map that rather than being for all CPUs will be for all online CPUs at the point it was opened. Having online in the function name I think captures the time dependent nature of this - but if you think that's too much could we add a comment?Quoted 5 lines
If you ask me it does the exact opposite. The function of the code is to put the event on all CPUS without having to know the details
of: well actually perf doesn't automagically retain or restore events across enabling or disabling CPUs so in fact we deal only in online CPUs.Quoted 5 lines
But 'any CPU' (-1) could map to an offline CPU brought online. Calling this function twice could also result in this behavior. Via the topology documentation we have language to describe exactly the scenario that's happening and I'd prefer not to muddy that by making all and online synonyms.
Quoted 4 lines
In this case the caller wants all CPUs, not online CPUs. The detail that we can't trace offline CPUs that become online is not relevant to the caller. Why would the caller call a function limited to online CPUs when that is not what the caller wants.
Agreed, the intention is for all CPUs to be traced, so all that can be traced should be traced, at the time of the call to this function.
An improvement, that would change the workings of this function, but that would still do what was asked, would be to have functionality that remembers such requestgs for tracing all CPUs and when a CPU that was offline is brought online, gets that CPU added to whoever asked for all CPUs to be traced.
Quoted 4 lines
If this is something critical to the caller, then perhaps it should provide a callback for when CPUs are made online (or offline).
But then we can add that functionality when the need arises?
It should always be possible to figure out which evsels to add a newly online CPU to. Roughly:
per-thread evsels CPU map = {-1} => never change since the kernel dynamically schedules per-task contexts.
If the CPU is a user-requested CPU, add it to all per-cpu evsels.
Otherwise add it to evsels marked as system_wide.
Actually adding it would be a lot more challenging.
Quoted 50 lines
- Arnaldo
Quoted 46 lines
Quoted 9 lines
Quoted 8 lines
Quoted 4 lines
too much could we add a comment? I'm trying to avoid a situation, like with the CPU map code, where all and online are interchangeable leading to the code being unnecessarily confusing unless you read every line.
It is normal to have to read the details of code, and, in my experience at least, normal for the code not to work exactly the way I'd imagined.
Quoted 10 lines
:-) The problem is that we all need to work with abstractions at some point, abstraction is pretty much the whole point of computer science. We need to fix CPU maps empty function, it is just a fundamental level of contradiction. As with the CPU map index being often mistaken for the CPU leading to bugs and crashes, I suspect remedying empty will fix existing and future bugs. With function naming the point is to be short and succinct, but also to be intention revealing for the sake of abstraction. Yes you need to read the code, but as with CPU map empty even that isn't enough and trying to infer behavior from usage can be a long and painful process.
You seem to be insisting that the function be named for its implementation (i.e. offline CPUs are not supported) not its purpose (trace system wide).
I can only suggest we go back to the original name, because the function has *nothing* to do with whether or not perf supports tracing per-cpu contexts on offline CPUs that become online.
Quoted 18 lines
Thanks,
IanQuoted 14 lines
Quoted 13 lines
Thanks,
IanQuoted 9 lines
tools/perf/util/evlist.h +3
-1+{ +return evlist__add_aux_dummy (evlist, true); +}int evlist__add_sb_event (struct evlist *evlist,struct perf_event_attr *attr,evsel__sb_cb_t cb,void *data); --2.25.1
Adrian Hunter
reviewerPATCH v3 10/23 perf auxtrace: Add mmap_needed to auxtrace_mmap_params
In reply to Adrian HunterAdd mmap_needed to auxtrace_mmap_params.
Currently an auxtrace mmap is always attempted even if the event is not an auxtrace event. That works because, when AUX area tracing, there is always an auxtrace event first for every mmap. Prepare for that not being the case, which it won't be when sideband tracking events are allowed on all CPUs even when auxtrace is limited to selected CPUs.
---
Changes in V3: Amended mmap_needed comment
tools/perf/util/auxtrace.c | 10 ++++++++-- tools/perf/util/auxtrace.h | 11 +++++++++-- tools/perf/util/evlist.c | 5 +++-- tools/perf/util/mmap.c | 1 + 4 files changed, 21 insertions(+), 6 deletions(-)
tools/perf/util/auxtrace.c +8 -2
@@ -125,7 +125,7 @@ int auxtrace_mmap__mmap(struct auxtrace_mmap *mm, mm->tid = mp->tid; mm->cpu = mp->cpu.cpu; -if (!mp->len) { +if (!mp->len || !mp->mmap_needed) { mm->base =NULL ;return 0 ; }
@@ -168,9 +168,15 @@ void auxtrace_mmap_params__init(struct auxtrace_mmap_params *mp, }void auxtrace_mmap_params__set_idx (struct auxtrace_mmap_params *mp, -struct evlist *evlist,int idx, +struct evlist *evlist, +struct evsel *evsel,int idx,bool per_cpu) { + mp->mmap_needed = evsel->needs_auxtrace_mmap; + +if (!mp->mmap_needed) +return ; + mp->idx = idx;if (per_cpu) {
tools/perf/util/auxtrace.h +9 -2
@@ -344,6 +344,10 @@ struct auxtrace_mmap {* @idx: index of this mmap * @tid: tid for a per-thread mmap (also set if there is only 1 tid on a per-cpu * mmap) otherwise %0 +* @mmap_needed: set to %false for non-auxtrace events. This is needed because +* auxtrace mmapping is done in the same code path as non-auxtrace +* mmapping but not every evsel that needs non-auxtrace mmapping +* also needs auxtrace mmapping. * @cpu: cpu number for a per-cpu mmap otherwise %-1 */ struct auxtrace_mmap_params {
@@ -353,6 +357,7 @@ struct auxtrace_mmap_params {int prot;int idx;pid_t tid; +bool mmap_needed;struct perf_cpu cpu; };
@@ -490,7 +495,8 @@ void auxtrace_mmap_params__init(struct auxtrace_mmap_params *mp,unsigned int auxtrace_pages, bool auxtrace_overwrite);void auxtrace_mmap_params__set_idx (struct auxtrace_mmap_params *mp, -struct evlist *evlist,int idx, +struct evlist *evlist, +struct evsel *evsel,int idx,bool per_cpu); typedef int (*process_auxtrace_t)(struct perf_tool *tool,
@@ -863,7 +869,8 @@ void auxtrace_mmap_params__init(struct auxtrace_mmap_params *mp,unsigned int auxtrace_pages, bool auxtrace_overwrite);void auxtrace_mmap_params__set_idx (struct auxtrace_mmap_params *mp, -struct evlist *evlist,int idx, +struct evlist *evlist, +struct evsel *evsel,int idx,bool per_cpu);#define ITRACE_HELP ""
tools/perf/util/evlist.c +3 -2
@@ -747,15 +747,16 @@ static struct mmap *evlist__alloc_mmap(struct evlist *evlist,static void perf_evlist__mmap_cb_idx (struct perf_evlist *_evlist, -struct perf_evsel *_evsel__maybe_unused , +struct perf_evsel *_evsel,struct perf_mmap_param *_mp,int idx) { struct evlist *evlist = container_of(_evlist, struct evlist, core); struct mmap_params *mp = container_of(_mp, struct mmap_params, core);bool per_cpu = !perf_cpu_map__empty (_evlist->user_requested_cpus); + struct evsel *evsel = container_of(_evsel, struct evsel, core); -auxtrace_mmap_params__set_idx (&mp->auxtrace_mp, evlist, idx, per_cpu); +auxtrace_mmap_params__set_idx (&mp->auxtrace_mp, evlist, evsel, idx, per_cpu); } static struct perf_mmap*
tools/perf/util/mmap.c +1 -0
@@ -62,6 +62,7 @@ void __weak auxtrace_mmap_params__init(struct auxtrace_mmap_params *mp __maybe_uvoid __weak auxtrace_mmap_params__set_idx (struct auxtrace_mmap_params *mp__maybe_unused ,struct evlist *evlist__maybe_unused , +struct evsel *evsel__maybe_unused ,int idx__maybe_unused ,bool per_cpu__maybe_unused ) {
Signature · 1 line
2.25.1
Adrian Hunter
reviewerRe: [PATCH V2 10/23] perf auxtrace: Add mmap_needed to auxtrace_mmap_params
In reply to Ian RogersQuoted 4 lines · Ian Rogers
Quoted 3 lines · Adrian Hunter
Add
mmap_neededtoauxtrace_mmap_params.
Quoted 8 lines
Quoted 5 lines
Currently an auxtrace mmap is always attempted even if the event is not an auxtrace event. That works because, when AUX area tracing, there is always an auxtrace event first for every mmap. Prepare for that not being the case, which it won't be when sideband tracking events are allowed on all CPUs even when auxtrace is limited to selected CPUs.
Should there be a later patch to remove this option and just not do the auxtrace mmap when it's not necessary?
The same code path is used for non-auxtrace mmap as auxtrace mmap. I have amended the comment to explain.
Quoted 124 lines
Quoted 44 lines
Signed-off-by Adrian Hunter <[email protected]>--- tools/perf/util/auxtrace.c | 10 ++++++++-- tools/perf/util/auxtrace.h | 8 ++++++-- tools/perf/util/evlist.c | 5 +++-- tools/perf/util/mmap.c | 1 + 4 files changed, 18 insertions(+), 6 deletions(-)tools/perf/util/auxtrace.c +8
-2@@ -125,7 +125,7 @@ int auxtrace_mmap__mmap(struct auxtrace_mmap *mm, mm->tid = mp->tid; mm->cpu = mp->cpu.cpu; -if (!mp->len) { +if (!mp->len || !mp->mmap_needed) { mm->base =NULL ;return 0 ; }@@ -168,9 +168,15 @@ void auxtrace_mmap_params__init(struct auxtrace_mmap_params *mp, }void auxtrace_mmap_params__set_idx (struct auxtrace_mmap_params *mp, -struct evlist *evlist,int idx, +struct evlist *evlist, +struct evsel *evsel,int idx,bool per_cpu) { + mp->mmap_needed = evsel->needs_auxtrace_mmap; + +if (!mp->mmap_needed) +return ; + mp->idx = idx;if (per_cpu) {tools/perf/util/auxtrace.h +0
-0tools/perf/util/auxtrace.h struct auxtrace_mmap { · line 347
Quoted 4 lines
tools/perf/util/auxtrace.h +1
-0@@ -344,6 +344,7 @@ struct auxtrace_mmap {* @idx: index of this mmap * @tid: tid for a per-thread mmap (also set if there is only 1 tid on a per-cpu * mmap) otherwise %0 +* @mmap_needed: set to %false for non-auxtrace events Could you add something like:
(ie. we don't want the mmap but we do want the side effects of ...Thanks,
IanQuoted 69 lines
tools/perf/util/auxtrace.h +5
-2* @cpu: cpu number for a per-cpu mmap otherwise %-1 */ struct auxtrace_mmap_params {@@ -353,6 +354,7 @@ struct auxtrace_mmap_params {int prot;int idx;pid_t tid; +bool mmap_needed;struct perf_cpu cpu; };@@ -490,7 +492,8 @@ void auxtrace_mmap_params__init(struct auxtrace_mmap_params *mp,unsigned int auxtrace_pages, bool auxtrace_overwrite);void auxtrace_mmap_params__set_idx (struct auxtrace_mmap_params *mp, -struct evlist *evlist,int idx, +struct evlist *evlist, +struct evsel *evsel,int idx,bool per_cpu); typedef int (*process_auxtrace_t)(struct perf_tool *tool,@@ -863,7 +866,8 @@ void auxtrace_mmap_params__init(struct auxtrace_mmap_params *mp,unsigned int auxtrace_pages, bool auxtrace_overwrite);void auxtrace_mmap_params__set_idx (struct auxtrace_mmap_params *mp, -struct evlist *evlist,int idx, +struct evlist *evlist, +struct evsel *evsel,int idx,bool per_cpu);#define ITRACE_HELP ""tools/perf/util/evlist.c +3
-2@@ -747,15 +747,16 @@ static struct mmap *evlist__alloc_mmap(struct evlist *evlist,static void perf_evlist__mmap_cb_idx (struct perf_evlist *_evlist, -struct perf_evsel *_evsel__maybe_unused , +struct perf_evsel *_evsel,struct perf_mmap_param *_mp,int idx) { struct evlist *evlist = container_of(_evlist, struct evlist, core); struct mmap_params *mp = container_of(_mp, struct mmap_params, core);bool per_cpu = !perf_cpu_map__empty (_evlist->user_requested_cpus); + struct evsel *evsel = container_of(_evsel, struct evsel, core); -auxtrace_mmap_params__set_idx (&mp->auxtrace_mp, evlist, idx, per_cpu); +auxtrace_mmap_params__set_idx (&mp->auxtrace_mp, evlist, evsel, idx, per_cpu); } static struct perf_mmap*tools/perf/util/mmap.c +1
-1@@ -62,6 +62,7 @@ void __weak auxtrace_mmap_params__init(struct auxtrace_mmap_params *mp __maybe_uvoid __weak auxtrace_mmap_params__set_idx (struct auxtrace_mmap_params *mp__maybe_unused ,struct evlist *evlist__maybe_unused , +struct evsel *evsel__maybe_unused ,int idx__maybe_unused ,bool per_cpu__maybe_unused ) { --2.25.1
Adrian Hunter
reviewerPATCH v3 13/23 perf evlist: Add evlist__add_dummy_on_all_cpus()
In reply to Adrian HunterAdd evlist__add_dummy_on_all_cpus() to enable creating a system-wide dummy event that sets up the system-wide maps before map propagation.
For convenience, add evlist__add_aux_dummy() so that the logic can be used whether or not the event needs to be system-wide.
---
Changes in V3: Amended comment about all CPUs.
tools/perf/util/evlist.c | 45 ++++++++++++++++++++++++++++++++++++++++ tools/perf/util/evlist.h | 5 +++++ 2 files changed, 50 insertions(+)
tools/perf/util/evlist.c +45 -0
@@ -264,6 +264,51 @@ int evlist__add_dummy(struct evlist *evlist)return 0 ; } +static void evlist__add_on_all_cpus (struct evlist *evlist,struct evsel *evsel) +{ + evsel->core.system_wide = true; + +/* +* All CPUs. +* +* Note perf_event_open() does not accept CPUs that are not online, so +* in fact this CPU list will include only all online CPUs. +*/ +perf_cpu_map__put (evsel->core.own_cpus); + evsel->core.own_cpus =perf_cpu_map__new (NULL ); +perf_cpu_map__put (evsel->core.cpus); + evsel->core.cpus =perf_cpu_map__get (evsel->core.own_cpus); + +/* No threads */ +perf_thread_map__put (evsel->core.threads); + evsel->core.threads =perf_thread_map__new_dummy (); + +evlist__add (evlist, evsel); +} + +struct evsel *evlist__add_aux_dummy (struct evlist *evlist,bool system_wide) +{ +struct evsel *evsel =evlist__dummy_event (evlist); + +if (!evsel) +return NULL ; + + evsel->core.attr.exclude_kernel =1 ; + evsel->core.attr.exclude_guest =1 ; + evsel->core.attr.exclude_hv =1 ; + evsel->core.attr.freq =0 ; + evsel->core.attr.sample_period =1 ; + evsel->no_aux_samples = true; + evsel->name =strdup ("dummy:u" ); + +if (system_wide) +evlist__add_on_all_cpus (evlist, evsel); +else +evlist__add (evlist, evsel); + +return evsel; +} +static int evlist__add_attrs (struct evlist *evlist,struct perf_event_attr *attrs,size_t nr_attrs) {struct evsel *evsel, *n;
tools/perf/util/evlist.h +5 -0
@@ -114,6 +114,11 @@ int arch_evlist__add_default_attrs(struct evlist *evlist);struct evsel *arch_evlist__leader (struct list_head *list);int evlist__add_dummy (struct evlist *evlist); +struct evsel *evlist__add_aux_dummy (struct evlist *evlist,bool system_wide); +static inline struct evsel *evlist__add_dummy_on_all_cpus (struct evlist *evlist) +{ +return evlist__add_aux_dummy (evlist, true); +}int evlist__add_sb_event (struct evlist *evlist,struct perf_event_attr *attr,evsel__sb_cb_t cb,void *data);
Signature · 1 line
2.25.1
Adrian Hunter
reviewerRe: [PATCH V2 21/23] libperf evsel: Add comments for booleans
In reply to Ian RogersQuoted 15 lines · Ian Rogers
Quoted 14 lines · Adrian Hunter
Add comments for '
system_wide' and 'requires_cpu' booleansSigned-off-by Adrian Hunter <[email protected]>--- tools/lib/perf/include/internal/evsel.h | 9 +++++++++ 1 file changed, 9 insertions(+)tools/lib/perf/include/internal/evsel.h +0
-0@@ -49,7 +49,16 @@ struct perf_evsel {
Quoted 13 lines
tools/lib/perf/include/internal/evsel.h struct perf_evsel { · line 55
Quoted 6 lines
tools/lib/perf/include/internal/evsel.h +4
-0/* parse modifier helper */ int nr_members; +/* +* system_wide is for events that need to be on every CPU, irrespective +* of user requested CPUs or threads. Map propagation will not override +* this events own_cpus, which will contribute to evlist all_cpus. So this muddies my understanding of cpus and
own_cpus(sigh, again undocumented). I believe cpus to be the set of CPUs (or any CPU, aka dummy) thatperf_event_openhappens on.all_cpusin evlist is the union of all the evsels cpus (ie not related toown_cpusas described here).Own_cpusI believe to be what's computed at parse-event time from sysfs. Is this a typo in the comment or quite likely my error?
A 'system_wide' event is not created by the parser, so own_cpus is set by the code adding the event.
Quoted 16 lines
Thanks,
IanQuoted 12 lines
tools/lib/perf/include/internal/evsel.h +5
-1+*/ bool system_wide; +/* +* Some events, for example uncore events, require a CPU. +* i.e. it cannot be the 'any CPU' value of -1. +*/ bool requires_cpu;int idx; }; --2.25.1
Namhyung Kim
maintainerRe: [PATCH V3 13/23] perf evlist: Add evlist__add_dummy_on_all_cpus()
In reply to Adrian HunterQuoted 28 lines · Adrian Hunter
Add
evlist__add_dummy_on_all_cpus()to enable creating a system-wide dummy event that sets up the system-wide maps before map propagation.For convenience, add
evlist__add_aux_dummy()so that the logic can be used whether or not the event needs to be system-wide.Signed-off-by Adrian Hunter <[email protected]>---
Changes in V3: Amended comment about all CPUs.
tools/perf/util/evlist.c | 45 ++++++++++++++++++++++++++++++++++++++++ tools/perf/util/evlist.h | 5 +++++ 2 files changed, 50 insertions(+)tools/perf/util/evlist.c +4
-0@@ -264,6 +264,51 @@ int evlist__add_dummy(struct evlist *evlist)return 0 ; } +static void evlist__add_on_all_cpus (struct evlist *evlist,struct evsel *evsel) +{ + evsel->core.system_wide = true; +
tools/perf/util/evlist.c int evlist__add_dummy(struct evlist *evlist) · line 280
Quoted 10 lines
tools/perf/util/evlist.c +10
-0+/* +* All CPUs. +* +* Note perf_event_open() does not accept CPUs that are not online, so +* in fact this CPU list will include only all online CPUs. +*/ +perf_cpu_map__put (evsel->core.own_cpus); + evsel->core.own_cpus =perf_cpu_map__new (NULL ); +perf_cpu_map__put (evsel->core.cpus); + evsel->core.cpus =perf_cpu_map__get (evsel->core.own_cpus);
Maybe I'm missing something.. Wouldn't it be overwritten by the user requested cpus during map propagation in evlist__add()?
Thanks,
Namhyung
Quoted 53 lines
tools/perf/util/evlist.c +31
-0+ +/* No threads */ +perf_thread_map__put (evsel->core.threads); + evsel->core.threads =perf_thread_map__new_dummy (); + +evlist__add (evlist, evsel); +} + +struct evsel *evlist__add_aux_dummy (struct evlist *evlist,bool system_wide) +{ +struct evsel *evsel =evlist__dummy_event (evlist); + +if (!evsel) +return NULL ; + + evsel->core.attr.exclude_kernel =1 ; + evsel->core.attr.exclude_guest =1 ; + evsel->core.attr.exclude_hv =1 ; + evsel->core.attr.freq =0 ; + evsel->core.attr.sample_period =1 ; + evsel->no_aux_samples = true; + evsel->name =strdup ("dummy:u" ); + +if (system_wide) +evlist__add_on_all_cpus (evlist, evsel); +else +evlist__add (evlist, evsel); + +return evsel; +} +static int evlist__add_attrs (struct evlist *evlist,struct perf_event_attr *attrs,size_t nr_attrs) {struct evsel *evsel, *n;tools/perf/util/evlist.h +5
-1@@ -114,6 +114,11 @@ int arch_evlist__add_default_attrs(struct evlist *evlist);struct evsel *arch_evlist__leader (struct list_head *list);int evlist__add_dummy (struct evlist *evlist); +struct evsel *evlist__add_aux_dummy (struct evlist *evlist,bool system_wide); +static inline struct evsel *evlist__add_dummy_on_all_cpus (struct evlist *evlist) +{ +return evlist__add_aux_dummy (evlist, true); +}int evlist__add_sb_event (struct evlist *evlist,struct perf_event_attr *attr,evsel__sb_cb_t cb,void *data); --2.25.1
Adrian Hunter
reviewerRe: [PATCH V3 13/23] perf evlist: Add evlist__add_dummy_on_all_cpus()
Quoted 35 lines · Namhyung Kim
Quoted 34 lines · Adrian Hunter
Add
evlist__add_dummy_on_all_cpus()to enable creating a system-wide dummy event that sets up the system-wide maps before map propagation.For convenience, add
evlist__add_aux_dummy()so that the logic can be used whether or not the event needs to be system-wide.Signed-off-by Adrian Hunter <[email protected]>---
Changes in V3: Amended comment about all CPUs.
tools/perf/util/evlist.c | 45 ++++++++++++++++++++++++++++++++++++++++ tools/perf/util/evlist.h | 5 +++++ 2 files changed, 50 insertions(+)tools/perf/util/evlist.c +10
-0@@ -264,6 +264,51 @@ int evlist__add_dummy(struct evlist *evlist)return 0 ; } +static void evlist__add_on_all_cpus (struct evlist *evlist,struct evsel *evsel) +{ + evsel->core.system_wide = true; + +/* +* All CPUs. +* +* Note perf_event_open() does not accept CPUs that are not online, so +* in fact this CPU list will include only all online CPUs. +*/
Quoted 8 lines
tools/perf/util/evlist.c int evlist__add_dummy(struct evlist *evlist) · line 280
Quoted 4 lines
tools/perf/util/evlist.c +4
-0+perf_cpu_map__put (evsel->core.own_cpus); + evsel->core.own_cpus =perf_cpu_map__new (NULL ); +perf_cpu_map__put (evsel->core.cpus); + evsel->core.cpus =perf_cpu_map__get (evsel->core.own_cpus);Maybe I'm missing something.. Wouldn't it be overwritten by the user requested cpus during map propagation in
evlist__add()?
Yes. That gets changed in patch 22 "perf tools: Allow system-wide events to keep their own CPUs"
Quoted 58 lines
Thanks,
NamhyungQuoted 53 lines
tools/perf/util/evlist.c +31
-0+ +/* No threads */ +perf_thread_map__put (evsel->core.threads); + evsel->core.threads =perf_thread_map__new_dummy (); + +evlist__add (evlist, evsel); +} + +struct evsel *evlist__add_aux_dummy (struct evlist *evlist,bool system_wide) +{ +struct evsel *evsel =evlist__dummy_event (evlist); + +if (!evsel) +return NULL ; + + evsel->core.attr.exclude_kernel =1 ; + evsel->core.attr.exclude_guest =1 ; + evsel->core.attr.exclude_hv =1 ; + evsel->core.attr.freq =0 ; + evsel->core.attr.sample_period =1 ; + evsel->no_aux_samples = true; + evsel->name =strdup ("dummy:u" ); + +if (system_wide) +evlist__add_on_all_cpus (evlist, evsel); +else +evlist__add (evlist, evsel); + +return evsel; +} +static int evlist__add_attrs (struct evlist *evlist,struct perf_event_attr *attrs,size_t nr_attrs) {struct evsel *evsel, *n;tools/perf/util/evlist.h +5
-1@@ -114,6 +114,11 @@ int arch_evlist__add_default_attrs(struct evlist *evlist);struct evsel *arch_evlist__leader (struct list_head *list);int evlist__add_dummy (struct evlist *evlist); +struct evsel *evlist__add_aux_dummy (struct evlist *evlist,bool system_wide); +static inline struct evsel *evlist__add_dummy_on_all_cpus (struct evlist *evlist) +{ +return evlist__add_aux_dummy (evlist, true); +}int evlist__add_sb_event (struct evlist *evlist,struct perf_event_attr *attr,evsel__sb_cb_t cb,void *data); --2.25.1
Namhyung Kim
maintainerRe: [PATCH V3 13/23] perf evlist: Add evlist__add_dummy_on_all_cpus()
Quoted 46 lines · Adrian Hunter
Quoted 35 lines · Namhyung Kim
Quoted 34 lines · Adrian Hunter
Add
evlist__add_dummy_on_all_cpus()to enable creating a system-wide dummy event that sets up the system-wide maps before map propagation.For convenience, add
evlist__add_aux_dummy()so that the logic can be used whether or not the event needs to be system-wide.Signed-off-by Adrian Hunter <[email protected]>---
Changes in V3: Amended comment about all CPUs.
tools/perf/util/evlist.c | 45 ++++++++++++++++++++++++++++++++++++++++ tools/perf/util/evlist.h | 5 +++++ 2 files changed, 50 insertions(+)tools/perf/util/evlist.c +10
-0@@ -264,6 +264,51 @@ int evlist__add_dummy(struct evlist *evlist)return 0 ; } +static void evlist__add_on_all_cpus (struct evlist *evlist,struct evsel *evsel) +{ + evsel->core.system_wide = true; + +/* +* All CPUs. +* +* Note perf_event_open() does not accept CPUs that are not online, so +* in fact this CPU list will include only all online CPUs. +*/ Quoted 8 lines
tools/perf/util/evlist.c int evlist__add_dummy(struct evlist *evlist) · line 280
Quoted 4 lines
tools/perf/util/evlist.c +4
-0+perf_cpu_map__put (evsel->core.own_cpus); + evsel->core.own_cpus =perf_cpu_map__new (NULL ); +perf_cpu_map__put (evsel->core.cpus); + evsel->core.cpus =perf_cpu_map__get (evsel->core.own_cpus);Maybe I'm missing something.. Wouldn't it be overwritten by the user requested cpus during map propagation in
evlist__add()?
Quoted 2 lines
Yes. That gets changed in patch 22 "perf tools: Allow system-wide events to keep their own CPUs"
Oh, I see. I'll take a look.
Thanks,
Namhyung
Namhyung Kim
maintainerRe: [PATCH V2 22/23] perf tools: Allow system-wide events to keep their own CPUs
In reply to Adrian HunterQuoted 20 lines · Adrian Hunter
Currently,
user_requested_cpussupplants system-wide CPUs when the evlisthas_user_cpus. Change that so that system-wide events retain their own CPUs and they are added toall_cpus.Acked-by Ian Rogers <[email protected]>Signed-off-by Adrian Hunter <[email protected]>--- tools/lib/perf/evlist.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-)tools/lib/perf/evlist.c +0
-1@@ -40,12 +40,11 @@ static void __perf_evlist__propagate_maps(struct perf_evlist *evlist,* We already have cpus for evsel (via PMU sysfs) so * keep it, if there's no target cpu list defined. */ -if (!evsel->own_cpus || evlist->has_user_cpus) {
tools/lib/perf/evlist.c static void __perf_evlist__propagate_maps(struct perf_evlist *evlist, · line 47
Quoted 10 lines
tools/lib/perf/evlist.c +5
-5-perf_cpu_map__put (evsel->cpus); - evsel->cpus =perf_cpu_map__get (evlist->user_requested_cpus); - }else if (!evsel->system_wide && - !evsel->requires_cpu && -perf_cpu_map__empty (evlist->user_requested_cpus)) { +if (!evsel->own_cpus || + (!evsel->system_wide && evlist->has_user_cpus) || + (!evsel->system_wide && + !evsel->requires_cpu && +perf_cpu_map__empty (evlist->user_requested_cpus))) {
This is getting hard to understand. IIUC this propagation basically sets user requested cpus to evsel unless it has its own cpus, right?
But the hybrid pmus make this complex. Maybe we can move the logic in evlist__fix_hybrid_cpus() here and simplify it like below
if (evsel->own_cpus) {
if (evsel->pmu->is_hybrid)
evsel->cpus = fixup_hybrid_cpus(evsel>own_cpus,
evlist->user_requested_cpus); //?
else
evsel->cpus = evlist->own_cpus; // put + get
} else { evsel->cpus = evlist->user_requested_cpus; // put + get
}
Then we need to make sure evsel->pmu is set properly.
What do you think?
Thanks,
Namhyung
Quoted 6 lines
tools/lib/perf/evlist.c +0
-1perf_cpu_map__put (evsel->cpus); evsel->cpus =perf_cpu_map__get (evlist->user_requested_cpus); }else if (evsel->cpus != evsel->own_cpus) { --2.25.1
Ian Rogers
reviewerRe: [PATCH V2 21/23] libperf evsel: Add comments for booleans
In reply to Adrian HunterQuoted 31 lines · Adrian Hunter
Quoted 15 lines · Ian Rogers
Quoted 14 lines · Adrian Hunter
Add comments for '
system_wide' and 'requires_cpu' booleansSigned-off-by Adrian Hunter <[email protected]>--- tools/lib/perf/include/internal/evsel.h | 9 +++++++++ 1 file changed, 9 insertions(+)tools/lib/perf/include/internal/evsel.h +0
-0@@ -49,7 +49,16 @@ struct perf_evsel {Quoted 13 lines
tools/lib/perf/include/internal/evsel.h struct perf_evsel { · line 55
Quoted 6 lines
tools/lib/perf/include/internal/evsel.h +4
-0/* parse modifier helper */ int nr_members; +/* +* system_wide is for events that need to be on every CPU, irrespective +* of user requested CPUs or threads. Map propagation will not override +* this events own_cpus, which will contribute to evlist all_cpus. So this muddies my understanding of cpus and
own_cpus(sigh, again undocumented). I believe cpus to be the set of CPUs (or any CPU, aka dummy) thatperf_event_openhappens on.all_cpusin evlist is the union of all the evsels cpus (ie not related toown_cpusas described here).Own_cpusI believe to be what's computed at parse-event time from sysfs. Is this a typo in the comment or quite likely my error?
Quoted 2 lines
A '
system_wide' event is not created by the parser, soown_cpusis set by the code adding the event.
I think I may be misreading the comment. Perhaps it should read:
system_wide is for events that need to be on every CPU, irrespective of user requested CPUs or threads. Map propagation will not override this event's own_cpus and own_cpus don't contribute to the evlist all_cpus.
It would be nice if there were a comment on own_cpus to explain its relationship to cpus and more broadly when it is used. Fwiw, the parse time copy is made here:
https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/perf/util/parse-events.c?h=perf/core#n367
I worry that if own_cpus should be used in place of cpus then iterators like evlist__for_each_cpu may need to handle this, and so they'd be broken currently.
Thanks,
Ian
Quoted 17 lines
Quoted 16 lines
Thanks,
IanQuoted 12 lines
tools/lib/perf/include/internal/evsel.h +5
-1+*/ bool system_wide; +/* +* Some events, for example uncore events, require a CPU. +* i.e. it cannot be the 'any CPU' value of -1. +*/ bool requires_cpu;int idx; }; --2.25.1
Adrian Hunter
reviewerRe: [PATCH V2 22/23] perf tools: Allow system-wide events to keep their own CPUs
In reply to Namhyung KimQuoted 26 lines · Namhyung Kim
Quoted 25 lines · Adrian Hunter
Currently,
user_requested_cpussupplants system-wide CPUs when the evlisthas_user_cpus. Change that so that system-wide events retain their own CPUs and they are added toall_cpus.Acked-by Ian Rogers <[email protected]>Signed-off-by Adrian Hunter <[email protected]>--- tools/lib/perf/evlist.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-)tools/lib/perf/evlist.c +0
-6@@ -40,12 +40,11 @@ static void __perf_evlist__propagate_maps(struct perf_evlist *evlist,* We already have cpus for evsel (via PMU sysfs) so * keep it, if there's no target cpu list defined. */ -if (!evsel->own_cpus || evlist->has_user_cpus) { -perf_cpu_map__put (evsel->cpus); - evsel->cpus =perf_cpu_map__get (evlist->user_requested_cpus); - }else if (!evsel->system_wide && - !evsel->requires_cpu && -perf_cpu_map__empty (evlist->user_requested_cpus)) {
Quoted 8 lines
tools/lib/perf/evlist.c static void __perf_evlist__propagate_maps(struct perf_evlist *evlist, · line 47
Quoted 5 lines
tools/lib/perf/evlist.c +5
-0+if (!evsel->own_cpus || + (!evsel->system_wide && evlist->has_user_cpus) || + (!evsel->system_wide && + !evsel->requires_cpu && +perf_cpu_map__empty (evlist->user_requested_cpus))) {This is getting hard to understand. IIUC this propagation basically sets user requested cpus to evsel unless it has its own cpus, right?
I put the conditional logic altogether because that is kernel style but it does make it practically unreadable.
If we start with the original logic:
if (!evsel->own_cpus || evlist->has_user_cpus) {
perf_cpu_map__put(evsel->cpus);
evsel->cpus = perf_cpu_map__get(evlist->user_requested_cpus);
} else if (!evsel->system_wide && perf_cpu_map__empty(evlist->user_requested_cpus)) {
perf_cpu_map__put(evsel->cpus);
evsel->cpus = perf_cpu_map__get(evlist->user_requested_cpus);
} else if (evsel->cpus != evsel->own_cpus) {
perf_cpu_map__put(evsel->cpus);
evsel->cpus = perf_cpu_map__get(evsel->own_cpus);
}Then make it more readable, i.e. same functionality
struct perf_cpu_map *cpus;
if (!evsel->own_cpus || evlist->has_user_cpus)
cpus = evlist->user_requested_cpus;
else if (!evsel->system_wide && perf_cpu_map__empty(evlist->user_requested_cpus))
cpus = evlist->user_requested_cpus;
else
cpus = evsel->own_cpus;
if (evsel->cpus != cpus) {
perf_cpu_map__put(evsel->cpus);
evsel->cpus = perf_cpu_map__get(cpus);
}Then separate out the conditions, i.e. still same functionality
if (!evsel->own_cpus) cpus = evlist->user_requested_cpus; else if (evlist->has_user_cpus) cpus = evlist->user_requested_cpus; else if (evsel->system_wide) cpus = evsel->own_cpus; else if (perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus;
Then add the new requires_cpu flag:
if (!evsel->own_cpus) cpus = evlist->user_requested_cpus; else if (evlist->has_user_cpus) cpus = evlist->user_requested_cpus; else if (evsel->system_wide) cpus = evsel->own_cpus; - else if (perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ + else if (!evsel->requres_cpu && perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus;
Then make system_wide keep own_cpus even if has_user_cpus:
if (!evsel->own_cpus) cpus = evlist->user_requested_cpus; + else if (evsel->system_wide) + cpus = evsel->own_cpus; else if (evlist->has_user_cpus) cpus = evlist->user_requested_cpus; - else if (evsel->system_wide) - cpus = evsel->own_cpus; else if (!evsel->requres_cpu && perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus;
Which leaves:
if (!evsel->own_cpus) cpus = evlist->user_requested_cpus; else if (evsel->system_wide) cpus = evsel->own_cpus; else if (evlist->has_user_cpus) cpus = evlist->user_requested_cpus; else if (!evsel->requres_cpu && perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus;
And putting it back together:
if (!evsel->own_cpus ||
(!evsel->system_wide && evlist->has_user_cpus) ||
(!evsel->system_wide &&
!evsel->requires_cpu &&
perf_cpu_map__empty(evlist->user_requested_cpus))) {
cpus = evlist->user_requested_cpus;
else
cpus = evsel->own_cpus;Perhaps I shouldn't put it together?
Quoted 11 lines
But the hybrid pmus make this complex. Maybe we can move the logic in
evlist__fix_hybrid_cpus()here and simplify it like belowif (evsel->own_cpus) { if (evsel->pmu->is_hybrid) evsel->cpus = fixup_hybrid_cpus(evsel>own_cpus, evlist->user_requested_cpus); //? else evsel->cpus = evlist->own_cpus; // put + get } else {
Quoted 6 lines
evsel->cpus=evlist->user_requested_cpus; // put + get
}Then we need to make sure
evsel->pmuis set properly.What do you think?
Hybrid handling looks complicated. I would have to spend time better understanding it.
So, in the context of this patch set, I don't want to look at issues with hybrid CPUs, except that there should be no change to how they are handled.
Quoted 11 lines
Thanks,
NamhyungQuoted 6 lines
tools/lib/perf/evlist.c +0
-1perf_cpu_map__put (evsel->cpus); evsel->cpus =perf_cpu_map__get (evlist->user_requested_cpus); }else if (evsel->cpus != evsel->own_cpus) { --2.25.1
Adrian Hunter
reviewerRe: [PATCH V2 21/23] libperf evsel: Add comments for booleans
In reply to Ian RogersQuoted 35 lines · Ian Rogers
Quoted 31 lines · Adrian Hunter
Quoted 15 lines · Ian Rogers
Quoted 14 lines · Adrian Hunter
Add comments for '
system_wide' and 'requires_cpu' booleansSigned-off-by Adrian Hunter <[email protected]>--- tools/lib/perf/include/internal/evsel.h | 9 +++++++++ 1 file changed, 9 insertions(+)tools/lib/perf/include/internal/evsel.h +0
-0@@ -49,7 +49,16 @@ struct perf_evsel {Quoted 13 lines
tools/lib/perf/include/internal/evsel.h struct perf_evsel { · line 55
Quoted 6 lines
tools/lib/perf/include/internal/evsel.h +4
-0/* parse modifier helper */ int nr_members; +/* +* system_wide is for events that need to be on every CPU, irrespective +* of user requested CPUs or threads. Map propagation will not override +* this events own_cpus, which will contribute to evlist all_cpus. So this muddies my understanding of cpus and
own_cpus(sigh, again undocumented). I believe cpus to be the set of CPUs (or any CPU, aka dummy) thatperf_event_openhappens on.all_cpusin evlist is the union of all the evsels cpus (ie not related toown_cpusas described here).Own_cpusI believe to be what's computed at parse-event time from sysfs. Is this a typo in the comment or quite likely my error?Quoted 2 lines
A '
system_wide' event is not created by the parser, soown_cpusis set by the code adding the event.
Quoted 6 lines
I think I may be misreading the comment. Perhaps it should read:
system_wideis for events that need to be on every CPU, irrespective of user requested CPUs or threads. Map propagation will not override this event'sown_cpusandown_cpusdon't contribute to the evlistall_cpus.
For a system_wide evsel, evsel->cpus are set to own_cpus and the evsel->cpus contribute to all_cpus.
Quoted 9 lines
It would be nice if there were a comment on
own_cpusto explain its relationship to cpus and more broadly when it is used. Fwiw, the parse time copy is made here:
https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/perf/util/parse-events.c?h=perf/core#n367I worry that if
own_cpusshould be used in place of cpus then iterators likeevlist__for_each_cpumay need to handle this, and so they'd be broken currently.
No, evsel->own_cpus may be used to determine evsel->cpus, but that is where their influence stops.
Quoted 21 lines
Thanks,
IanQuoted 17 lines
Quoted 16 lines
Thanks,
IanQuoted 12 lines
tools/lib/perf/include/internal/evsel.h +5
-1+*/ bool system_wide; +/* +* Some events, for example uncore events, require a CPU. +* i.e. it cannot be the 'any CPU' value of -1. +*/ bool requires_cpu;int idx; }; --2.25.1
Namhyung Kim
maintainerRe: [PATCH V2 22/23] perf tools: Allow system-wide events to keep their own CPUs
In reply to Adrian HunterQuoted 135 lines · Adrian Hunter
Quoted 26 lines · Namhyung Kim
Quoted 25 lines · Adrian Hunter
Currently,
user_requested_cpussupplants system-wide CPUs when the evlisthas_user_cpus. Change that so that system-wide events retain their own CPUs and they are added toall_cpus.Acked-by Ian Rogers <[email protected]>Signed-off-by Adrian Hunter <[email protected]>--- tools/lib/perf/evlist.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-)tools/lib/perf/evlist.c +0
-6@@ -40,12 +40,11 @@ static void __perf_evlist__propagate_maps(struct perf_evlist *evlist,* We already have cpus for evsel (via PMU sysfs) so * keep it, if there's no target cpu list defined. */ -if (!evsel->own_cpus || evlist->has_user_cpus) { -perf_cpu_map__put (evsel->cpus); - evsel->cpus =perf_cpu_map__get (evlist->user_requested_cpus); - }else if (!evsel->system_wide && - !evsel->requires_cpu && -perf_cpu_map__empty (evlist->user_requested_cpus)) {Quoted 8 lines
tools/lib/perf/evlist.c static void __perf_evlist__propagate_maps(struct perf_evlist *evlist, · line 47
Quoted 5 lines
tools/lib/perf/evlist.c +5
-0+if (!evsel->own_cpus || + (!evsel->system_wide && evlist->has_user_cpus) || + (!evsel->system_wide && + !evsel->requires_cpu && +perf_cpu_map__empty (evlist->user_requested_cpus))) {This is getting hard to understand. IIUC this propagation basically sets user requested cpus to evsel unless it has its own cpus, right?
I put the conditional logic altogether because that is kernel style but it does make it practically unreadable.
If we start with the original logic:
if (!evsel->own_cpus || evlist->has_user_cpus) { perf_cpu_map__put(evsel->cpus); evsel->cpus = perf_cpu_map__get(evlist->user_requested_cpus); } else if (!evsel->system_wide && perf_cpu_map__empty(evlist->user_requested_cpus)) { perf_cpu_map__put(evsel->cpus); evsel->cpus = perf_cpu_map__get(evlist->user_requested_cpus); } else if (evsel->cpus != evsel->own_cpus) { perf_cpu_map__put(evsel->cpus); evsel->cpus = perf_cpu_map__get(evsel->own_cpus); }Then make it more readable, i.e. same functionality
struct perf_cpu_map *cpus; if (!evsel->own_cpus || evlist->has_user_cpus) cpus = evlist->user_requested_cpus; else if (!evsel->system_wide && perf_cpu_map__empty(evlist->user_requested_cpus)) cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus; if (evsel->cpus != cpus) { perf_cpu_map__put(evsel->cpus); evsel->cpus = perf_cpu_map__get(cpus); }Then separate out the conditions, i.e. still same functionality
if (!evsel->own_cpus) cpus = evlist->user_requested_cpus; else if (evlist->has_user_cpus) cpus = evlist->user_requested_cpus; else if (evsel->system_wide) cpus = evsel->own_cpus; else if (perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus;Then add the new
requires_cpuflag:if (!evsel->own_cpus) cpus = evlist->user_requested_cpus; else if (evlist->has_user_cpus) cpus = evlist->user_requested_cpus; else if (evsel->system_wide) cpus = evsel->own_cpus;(quoted diff) +1
-1- else if (perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ + else if (!evsel->requres_cpu && perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus;Then make
system_widekeepown_cpuseven ifhas_user_cpus:if (!evsel->own_cpus) cpus = evlist->user_requested_cpus;(quoted diff) +2
-2+ else if (evsel->system_wide) + cpus = evsel->own_cpus; else if (evlist->has_user_cpus) cpus = evlist->user_requested_cpus; - else if (evsel->system_wide) - cpus = evsel->own_cpus; else if (!evsel->requres_cpu && perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus;Which leaves:
if (!evsel->own_cpus) cpus = evlist->user_requested_cpus; else if (evsel->system_wide) cpus = evsel->own_cpus; else if (evlist->has_user_cpus) cpus = evlist->user_requested_cpus; else if (!evsel->requres_cpu && perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus;And putting it back together:
if (!evsel->own_cpus || (!evsel->system_wide && evlist->has_user_cpus) || (!evsel->system_wide && !evsel->requires_cpu && perf_cpu_map__empty(evlist->user_requested_cpus))) { cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus;
Quoted 1 line
Perhaps I shouldn't put it together?
Cool, thanks a lot for explaining it in detail. I do not oppose your change but little worried about the complexity. And I think we have some issues with uncore events already.
So do you have any idea where evsel->own_cpus doesn't propagate to evsel->cpus?
I think evsel->system_wide and evsel->requires_cpu can be replaced to check evsel->own_cpus instead.
Actually evlist->has_user_cpus is checked first so uncore events' own_cpus might not be used.
In my laptop, perf stat -a -A -e imc/data_reads/ will use cpu 0 as it's listed in the pmu cpumask. But when I use -C1,2 it'll use the both cpus and returns the similar values each (so the sum is 2x).
I'm not sure if it's intended. I expect it runs on cpu 0 or one of the given cpus. Or it runs on both cpus and returns value in half so that the sum is the same as the original value (from a cpu).
Quoted 17 lines
Quoted 17 lines
But the hybrid pmus make this complex. Maybe we can move the logic in
evlist__fix_hybrid_cpus()here and simplify it like belowif (evsel->own_cpus) { if (evsel->pmu->is_hybrid) evsel->cpus = fixup_hybrid_cpus(evsel>own_cpus, evlist->user_requested_cpus); //? else evsel->cpus = evlist->own_cpus; // put + get } else {
evsel->cpus=evlist->user_requested_cpus; // put + get
}Then we need to make sure
evsel->pmuis set properly.
Quoted 8 lines
Quoted 1 line
What do you think?
Hybrid handling looks complicated. I would have to spend time better understanding it.
So, in the context of this patch set, I don't want to look at issues with hybrid CPUs, except that there should be no change to how they are handled.
Fair enough. But I think we have to look at it again soon.
Thanks,
Namhyung
Adrian Hunter
reviewerRe: [PATCH V2 22/23] perf tools: Allow system-wide events to keep their own CPUs
Quoted 136 lines · Namhyung Kim
Quoted 135 lines · Adrian Hunter
Quoted 26 lines · Namhyung Kim
Quoted 25 lines · Adrian Hunter
Currently,
user_requested_cpussupplants system-wide CPUs when the evlisthas_user_cpus. Change that so that system-wide events retain their own CPUs and they are added toall_cpus.Acked-by Ian Rogers <[email protected]>Signed-off-by Adrian Hunter <[email protected]>--- tools/lib/perf/evlist.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-)tools/lib/perf/evlist.c +0
-6@@ -40,12 +40,11 @@ static void __perf_evlist__propagate_maps(struct perf_evlist *evlist,* We already have cpus for evsel (via PMU sysfs) so * keep it, if there's no target cpu list defined. */ -if (!evsel->own_cpus || evlist->has_user_cpus) { -perf_cpu_map__put (evsel->cpus); - evsel->cpus =perf_cpu_map__get (evlist->user_requested_cpus); - }else if (!evsel->system_wide && - !evsel->requires_cpu && -perf_cpu_map__empty (evlist->user_requested_cpus)) {Quoted 8 lines
tools/lib/perf/evlist.c static void __perf_evlist__propagate_maps(struct perf_evlist *evlist, · line 47
Quoted 5 lines
tools/lib/perf/evlist.c +5
-0+if (!evsel->own_cpus || + (!evsel->system_wide && evlist->has_user_cpus) || + (!evsel->system_wide && + !evsel->requires_cpu && +perf_cpu_map__empty (evlist->user_requested_cpus))) {This is getting hard to understand. IIUC this propagation basically sets user requested cpus to evsel unless it has its own cpus, right?
I put the conditional logic altogether because that is kernel style but it does make it practically unreadable.
If we start with the original logic:
if (!evsel->own_cpus || evlist->has_user_cpus) { perf_cpu_map__put(evsel->cpus); evsel->cpus = perf_cpu_map__get(evlist->user_requested_cpus); } else if (!evsel->system_wide && perf_cpu_map__empty(evlist->user_requested_cpus)) { perf_cpu_map__put(evsel->cpus); evsel->cpus = perf_cpu_map__get(evlist->user_requested_cpus); } else if (evsel->cpus != evsel->own_cpus) { perf_cpu_map__put(evsel->cpus); evsel->cpus = perf_cpu_map__get(evsel->own_cpus); }Then make it more readable, i.e. same functionality
struct perf_cpu_map *cpus; if (!evsel->own_cpus || evlist->has_user_cpus) cpus = evlist->user_requested_cpus; else if (!evsel->system_wide && perf_cpu_map__empty(evlist->user_requested_cpus)) cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus; if (evsel->cpus != cpus) { perf_cpu_map__put(evsel->cpus); evsel->cpus = perf_cpu_map__get(cpus); }Then separate out the conditions, i.e. still same functionality
if (!evsel->own_cpus) cpus = evlist->user_requested_cpus; else if (evlist->has_user_cpus) cpus = evlist->user_requested_cpus; else if (evsel->system_wide) cpus = evsel->own_cpus; else if (perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus;Then add the new
requires_cpuflag:if (!evsel->own_cpus) cpus = evlist->user_requested_cpus; else if (evlist->has_user_cpus) cpus = evlist->user_requested_cpus; else if (evsel->system_wide) cpus = evsel->own_cpus;(quoted diff) +1
-1- else if (perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ + else if (!evsel->requres_cpu && perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus;Then make
system_widekeepown_cpuseven ifhas_user_cpus:if (!evsel->own_cpus) cpus = evlist->user_requested_cpus;(quoted diff) +2
-2+ else if (evsel->system_wide) + cpus = evsel->own_cpus; else if (evlist->has_user_cpus) cpus = evlist->user_requested_cpus; - else if (evsel->system_wide) - cpus = evsel->own_cpus; else if (!evsel->requres_cpu && perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus;Which leaves:
if (!evsel->own_cpus) cpus = evlist->user_requested_cpus; else if (evsel->system_wide) cpus = evsel->own_cpus; else if (evlist->has_user_cpus) cpus = evlist->user_requested_cpus; else if (!evsel->requres_cpu && perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus;And putting it back together:
if (!evsel->own_cpus || (!evsel->system_wide && evlist->has_user_cpus) || (!evsel->system_wide && !evsel->requires_cpu && perf_cpu_map__empty(evlist->user_requested_cpus))) { cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus;
Quoted 6 lines
Quoted 1 line
Perhaps I shouldn't put it together?
Cool, thanks a lot for explaining it in detail. I do not oppose your change but little worried about the complexity. And I think we have some issues with uncore events already.
Yes it is a bit complicated because we are handling many different use cases.
Quoted 3 lines
So do you have any idea where
evsel->own_cpusdoesn't propagate toevsel->cpus?
We let the user's list of CPUs override it i.e. the evlist->has_user_cpus case. Essentially we are expecting the user to know what they are doing.
Quoted 3 lines
I think
evsel->system_wideandevsel->requires_cpucan be replaced to checkevsel->own_cpusinstead.
Not at the moment because we let the user override own_cpus.
Quoted 3 lines
Actually
evlist->has_user_cpusis checked first so uncore events'own_cpusmight not be used.
Yes
Quoted 5 lines
In my laptop, perf stat -a -A -e imc/data_reads/ will use cpu 0 as it's listed in the pmu cpumask. But when I use -C1,2 it'll use the both cpus and returns the similar values each (so the sum is 2x).
We expect the user to understand the uncore PMU they are using. AFAICT an uncore PMU cpu mask with only CPU 0 typically means a single PMU that counts events that could be indrectly caused by any CPU. When the cpu mask has more than one CPU, it means a PMU for each of a group of CPU's (e.g. a core or socket)
So in the example you gave above, there is only 1 PMU and reading from any CPU will give it's value.
A user providing a list of CPUs for uncore events is useful only in certain cases. For example when each core has an uncore PMU and you only want to get values from one core.
Quoted 5 lines
I'm not sure if it's intended. I expect it runs on cpu 0 or one of the given cpus. Or it runs on both cpus and returns value in half so that the sum is the same as the original value (from a cpu).
I don't know if there is anything wrong with the way we are handling uncore PMUs, except that I don't know if it is documented anywhere.
Quoted 31 lines
Quoted 18 lines
Quoted 18 lines
But the hybrid pmus make this complex. Maybe we can move the logic in
evlist__fix_hybrid_cpus()here and simplify it like belowif (evsel->own_cpus) { if (evsel->pmu->is_hybrid) evsel->cpus = fixup_hybrid_cpus(evsel>own_cpus, evlist->user_requested_cpus); //? else evsel->cpus = evlist->own_cpus; // put + get } else {
evsel->cpus=evlist->user_requested_cpus; // put + get
}Then we need to make sure
evsel->pmuis set properly.Quoted 8 lines
Quoted 1 line
What do you think?
Hybrid handling looks complicated. I would have to spend time better understanding it.
So, in the context of this patch set, I don't want to look at issues with hybrid CPUs, except that there should be no change to how they are handled.
Fair enough. But I think we have to look at it again soon.
Thanks,
Namhyung
Re: [PATCH V2 22/23] perf tools: Allow system-wide events to keep their own CPUs
Quoted 156 lines · Adrian Hunter
Quoted 136 lines · Namhyung Kim
Quoted 135 lines · Adrian Hunter
Quoted 26 lines · Namhyung Kim
Quoted 25 lines · Adrian Hunter
Currently,
user_requested_cpussupplants system-wide CPUs when the evlisthas_user_cpus. Change that so that system-wide events retain their own CPUs and they are added toall_cpus.Acked-by Ian Rogers <[email protected]>Signed-off-by Adrian Hunter <[email protected]>--- tools/lib/perf/evlist.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-)tools/lib/perf/evlist.c +0
-6@@ -40,12 +40,11 @@ static void __perf_evlist__propagate_maps(struct perf_evlist *evlist,* We already have cpus for evsel (via PMU sysfs) so * keep it, if there's no target cpu list defined. */ -if (!evsel->own_cpus || evlist->has_user_cpus) { -perf_cpu_map__put (evsel->cpus); - evsel->cpus =perf_cpu_map__get (evlist->user_requested_cpus); - }else if (!evsel->system_wide && - !evsel->requires_cpu && -perf_cpu_map__empty (evlist->user_requested_cpus)) {Quoted 8 lines
tools/lib/perf/evlist.c static void __perf_evlist__propagate_maps(struct perf_evlist *evlist, · line 47
Quoted 5 lines
tools/lib/perf/evlist.c +5
-0+if (!evsel->own_cpus || + (!evsel->system_wide && evlist->has_user_cpus) || + (!evsel->system_wide && + !evsel->requires_cpu && +perf_cpu_map__empty (evlist->user_requested_cpus))) {This is getting hard to understand. IIUC this propagation basically sets user requested cpus to evsel unless it has its own cpus, right?
I put the conditional logic altogether because that is kernel style but it does make it practically unreadable.
If we start with the original logic:
if (!evsel->own_cpus || evlist->has_user_cpus) { perf_cpu_map__put(evsel->cpus); evsel->cpus = perf_cpu_map__get(evlist->user_requested_cpus); } else if (!evsel->system_wide && perf_cpu_map__empty(evlist->user_requested_cpus)) { perf_cpu_map__put(evsel->cpus); evsel->cpus = perf_cpu_map__get(evlist->user_requested_cpus); } else if (evsel->cpus != evsel->own_cpus) { perf_cpu_map__put(evsel->cpus); evsel->cpus = perf_cpu_map__get(evsel->own_cpus); }Then make it more readable, i.e. same functionality
struct perf_cpu_map *cpus; if (!evsel->own_cpus || evlist->has_user_cpus) cpus = evlist->user_requested_cpus; else if (!evsel->system_wide && perf_cpu_map__empty(evlist->user_requested_cpus)) cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus; if (evsel->cpus != cpus) { perf_cpu_map__put(evsel->cpus); evsel->cpus = perf_cpu_map__get(cpus); }Then separate out the conditions, i.e. still same functionality
if (!evsel->own_cpus) cpus = evlist->user_requested_cpus; else if (evlist->has_user_cpus) cpus = evlist->user_requested_cpus; else if (evsel->system_wide) cpus = evsel->own_cpus; else if (perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus;Then add the new
requires_cpuflag:if (!evsel->own_cpus) cpus = evlist->user_requested_cpus; else if (evlist->has_user_cpus) cpus = evlist->user_requested_cpus; else if (evsel->system_wide) cpus = evsel->own_cpus;(quoted diff) +1
-1- else if (perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ + else if (!evsel->requres_cpu && perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus;Then make
system_widekeepown_cpuseven ifhas_user_cpus:if (!evsel->own_cpus) cpus = evlist->user_requested_cpus;(quoted diff) +2
-2+ else if (evsel->system_wide) + cpus = evsel->own_cpus; else if (evlist->has_user_cpus) cpus = evlist->user_requested_cpus; - else if (evsel->system_wide) - cpus = evsel->own_cpus; else if (!evsel->requres_cpu && perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus;Which leaves:
if (!evsel->own_cpus) cpus = evlist->user_requested_cpus; else if (evsel->system_wide) cpus = evsel->own_cpus; else if (evlist->has_user_cpus) cpus = evlist->user_requested_cpus; else if (!evsel->requres_cpu && perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus;And putting it back together:
if (!evsel->own_cpus || (!evsel->system_wide && evlist->has_user_cpus) || (!evsel->system_wide && !evsel->requires_cpu && perf_cpu_map__empty(evlist->user_requested_cpus))) { cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus;Quoted 6 lines
Quoted 1 line
Perhaps I shouldn't put it together?
Cool, thanks a lot for explaining it in detail. I do not oppose your change but little worried about the complexity. And I think we have some issues with uncore events already.
Yes it is a bit complicated because we are handling many different use cases.
Quoted 3 lines
So do you have any idea where
evsel->own_cpusdoesn't propagate toevsel->cpus?We let the user's list of CPUs override it i.e. the
evlist->has_user_cpuscase. Essentially we are expecting the user to know what they are doing.Quoted 1 line
Quoted 5 lines
Quoted 2 lines
I think
evsel->system_wideandevsel->requires_cpucan be replaced to checkevsel->own_cpusinstead.Not at the moment because we let the user override
own_cpus.
Do we check whether the user's input is valid (match the PMU's cpumask) before the override?
I think we know the PMU name. The cpumask of the PMU can be found in the sysfs. So we should have enough information for a sanity check.
Quoted 20 lines
Quoted 4 lines
Actually
evlist->has_user_cpusis checked first so uncore events'own_cpusmight not be used.Yes
Quoted 5 lines
In my laptop, perf stat -a -A -e imc/data_reads/ will use cpu 0 as it's listed in the pmu cpumask. But when I use -C1,2 it'll use the both cpus and returns the similar values each (so the sum is 2x).
We expect the user to understand the uncore PMU they are using. AFAICT an uncore PMU cpu mask with only CPU 0 typically means a single PMU that counts events that could be indrectly caused by any CPU. When the cpu mask has more than one CPU, it means a PMU for each of a group of CPU's (e.g. a core or socket)
Quoted 13 lines
So in the example you gave above, there is only 1 PMU and reading from any CPU will give it's value.
A user providing a list of CPUs for uncore events is useful only in certain cases. For example when each core has an uncore PMU and you only want to get values from one core.
Quoted 5 lines
I'm not sure if it's intended. I expect it runs on cpu 0 or one of the given cpus. Or it runs on both cpus and returns value in half so that the sum is the same as the original value (from a cpu).
It runs on CPU0. The kernel will correct the CPU when initializing the event. The uncore is per-die (For the most current platforms, die is the same as socket.). Usually, it runs on the first CPU of a die. For the -C 1,2 uncore/event/ case, the current tool creates two events. One for each CPU. The kernel will find the die ID of the input CPU first, then correct it to the first CPU of the die, which is 0. So from the kernel's perspective, the perf command turns to -C0 uncore/event/ -C0 uncore/event/. That's why you see similar values each. (They should not be exactly the same. That's because they are not in a group.)
Quoted 4 lines
I don't know if there is anything wrong with the way we are handling uncore PMUs, except that I don't know if it is documented anywhere.
Right, we are lacking of the document for the cpumask. I guess I can update it in the Documentation/ABI/testing/sysfs-bus-event_source-devices-uncore. But it's only for the developer.
At the meantime, I think it may be better to show an error/warning if the user inputs are not matched with the cpumask of the requested PMU. That's for the end users.
Quoted 21 lines
Quoted 21 lines
Quoted 21 lines
Quoted 20 lines
But the hybrid pmus make this complex. Maybe we can move the logic in
evlist__fix_hybrid_cpus()here and simplify it like belowif (evsel->own_cpus) { if (evsel->pmu->is_hybrid) evsel->cpus = fixup_hybrid_cpus(evsel>own_cpus, evlist->user_requested_cpus); //? else evsel->cpus = evlist->own_cpus; // put + get } else { evsel->cpus = evlist->user_requested_cpus; // put + get }Then we need to make sure
evsel->pmuis set properly.What do you think?
Quoted 7 lines
Quoted 7 lines
Quoted 6 lines
Hybrid handling looks complicated. I would have to spend time better understanding it.
So, in the context of this patch set, I don't want to look at issues with hybrid CPUs, except that there should be no change to how they are handled.
I think we should at least run perf test on a hybrid machine. We already have some backlog to handle. It's better not to bring more regression issue.
Thanks,Kan
Adrian Hunter
reviewerRe: [PATCH V2 22/23] perf tools: Allow system-wide events to keep their own CPUs
Quoted 162 lines · Kan
Quoted 159 lines · Adrian Hunter
Quoted 136 lines · Namhyung Kim
Quoted 135 lines · Adrian Hunter
Quoted 26 lines · Namhyung Kim
Quoted 25 lines · Adrian Hunter
Currently,
user_requested_cpussupplants system-wide CPUs when the evlisthas_user_cpus. Change that so that system-wide events retain their own CPUs and they are added toall_cpus.Acked-by Ian Rogers <[email protected]>Signed-off-by Adrian Hunter <[email protected]>---
tools/lib/perf/evlist.c| 11 +++++------1 file changed, 5 insertions(+), 6 deletions(-)tools/lib/perf/evlist.c +0
-6@@ -40,12 +40,11 @@ static void __perf_evlist__propagate_maps(struct perf_evlist *evlist,* We already have cpus for evsel (via PMU sysfs) so * keep it, if there's no target cpu list defined. */ - if (!evsel->own_cpus || evlist->has_user_cpus) { - perf_cpu_map__put(evsel->cpus); - evsel->cpus = perf_cpu_map__get(evlist->user_requested_cpus); - } else if (!evsel->system_wide && - !evsel->requires_cpu && - perf_cpu_map__empty(evlist->user_requested_cpus)) {Quoted 8 lines
tools/lib/perf/evlist.c static void __perf_evlist__propagate_maps(struct perf_evlist *evlist, · line 47
Quoted 5 lines
tools/lib/perf/evlist.c +5
-0+ if (!evsel->own_cpus || + (!evsel->system_wide && evlist->has_user_cpus) || + (!evsel->system_wide && + !evsel->requires_cpu && + perf_cpu_map__empty(evlist->user_requested_cpus))) {This is getting hard to understand. IIUC this propagation basically sets user requested cpus to evsel unless it has its own cpus, right?
I put the conditional logic altogether because that is kernel style but it does make it practically unreadable.
If we start with the original logic:
if (!evsel->own_cpus ||
evlist->has_user_cpus) {perf_cpu_map__put(evsel->cpus);
evsel->cpus=perf_cpu_map__get(evlist->user_requested_cpus); } else if (!evsel->system_wide &&perf_cpu_map__empty(evlist->user_requested_cpus)) {perf_cpu_map__put(evsel->cpus);
evsel->cpus=perf_cpu_map__get(evlist->user_requested_cpus); } else if (evsel->cpus!=evsel->own_cpus) {perf_cpu_map__put(evsel->cpus);
evsel->cpus=perf_cpu_map__get(evsel->own_cpus);
}Then make it more readable, i.e. same functionality
struct
perf_cpu_map*cpus;if (!evsel->own_cpus ||
evlist->has_user_cpus)
cpus =evlist->user_requested_cpus;
else if (!evsel->system_wide &&perf_cpu_map__empty(evlist->user_requested_cpus)) cpus =evlist->user_requested_cpus;
else
cpus =evsel->own_cpus;if (
evsel->cpus!= cpus) {perf_cpu_map__put(evsel->cpus);evsel->cpus=perf_cpu_map__get(cpus); }Then separate out the conditions, i.e. still same functionality
if (!evsel->own_cpus)
cpus =evlist->user_requested_cpus;
else if (evlist->has_user_cpus)
cpus =evlist->user_requested_cpus;
else if (evsel->system_wide)
cpus =evsel->own_cpus;
else if (perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus =evlist->user_requested_cpus;
else
cpus =evsel->own_cpus;Then add the new
requires_cpuflag:if (!evsel->own_cpus)
cpus =evlist->user_requested_cpus;
else if (evlist->has_user_cpus)
cpus =evlist->user_requested_cpus;
else if (evsel->system_wide)
cpus =evsel->own_cpus;
- else if (perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */
+ else if (!evsel->requres_cpu &&perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus =evlist->user_requested_cpus;
else
cpus =evsel->own_cpus;Then make
system_widekeepown_cpuseven ifhas_user_cpus:if (!evsel->own_cpus)
cpus =evlist->user_requested_cpus;
+ else if (evsel->system_wide)
+ cpus =evsel->own_cpus;
else if (evlist->has_user_cpus)
cpus =evlist->user_requested_cpus;
- else if (evsel->system_wide)
- cpus =evsel->own_cpus;
else if (!evsel->requres_cpu &&perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus =evlist->user_requested_cpus;
else
cpus =evsel->own_cpus;Which leaves:
if (!evsel->own_cpus)
cpus =evlist->user_requested_cpus;
else if (evsel->system_wide)
cpus =evsel->own_cpus;
else if (evlist->has_user_cpus)
cpus =evlist->user_requested_cpus;
else if (!evsel->requres_cpu &&perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus =evlist->user_requested_cpus;
else
cpus =evsel->own_cpus;And putting it back together:
if (!evsel->own_cpus ||
(!evsel->system_wide &&evlist->has_user_cpus) || (!evsel->system_wide && !evsel->requires_cpu &&perf_cpu_map__empty(evlist->user_requested_cpus))) { cpus =evlist->user_requested_cpus; else
cpus =evsel->own_cpus;Quoted 6 lines
Quoted 1 line
Perhaps I shouldn't put it together?
Cool, thanks a lot for explaining it in detail. I do not oppose your change but little worried about the complexity. And I think we have some issues with uncore events already.
Yes it is a bit complicated because we are handling many different use cases.
Quoted 3 lines
So do you have any idea where
evsel->own_cpusdoesn't propagate toevsel->cpus?We let the user's list of CPUs override it i.e. the
evlist->has_user_cpuscase. Essentially we are expecting the user to know what they are doing.Quoted 3 lines
I think
evsel->system_wideandevsel->requires_cpucan be replaced to checkevsel->own_cpusinstead.
Quoted 6 lines
Quoted 2 lines
Not at the moment because we let the user override
own_cpus.Do we check whether the user's input is valid (match the PMU's cpumask) before the override?
I think we know the PMU name. The cpumask of the PMU can be found in the sysfs. So we should have enough information for a sanity check.
For the uncore PMU case, I am not sure what sanity is :-)
I don't know about the hybrid case. I suspect it doesn't work because it would need to intersect own_cpus with user_requested_cpus if has_user_cpus, wouldn't it?
Quoted 85 lines
Quoted 22 lines
Quoted 6 lines
Actually
evlist->has_user_cpusis checked first so uncore events'own_cpusmight not be used.Yes
Quoted 5 lines
In my laptop, perf stat -a -A -e imc/data_reads/ will use cpu 0 as it's listed in the pmu cpumask. But when I use -C1,2 it'll use the both cpus and returns the similar values each (so the sum is 2x).
We expect the user to understand the uncore PMU they are using. AFAICT an uncore PMU cpu mask with only CPU 0 typically means a single PMU that counts events that could be indrectly caused by any CPU. When the cpu mask has more than one CPU, it means a PMU for each of a group of CPU's (e.g. a core or socket)
Quoted 13 lines
So in the example you gave above, there is only 1 PMU and reading from any CPU will give it's value.
A user providing a list of CPUs for uncore events is useful only in certain cases. For example when each core has an uncore PMU and you only want to get values from one core.
Quoted 5 lines
I'm not sure if it's intended. I expect it runs on cpu 0 or one of the given cpus. Or it runs on both cpus and returns value in half so that the sum is the same as the original value (from a cpu).
It runs on CPU0. The kernel will correct the CPU when initializing the event. The uncore is per-die (For the most current platforms, die is the same as socket.). Usually, it runs on the first CPU of a die. For the -C 1,2 uncore/event/ case, the current tool creates two events. One for each CPU. The kernel will find the die ID of the input CPU first, then correct it to the first CPU of the die, which is 0. So from the kernel's perspective, the perf command turns to -C0 uncore/event/ -C0 uncore/event/. That's why you see similar values each. (They should not be exactly the same. That's because they are not in a group.)
Quoted 4 lines
I don't know if there is anything wrong with the way we are handling uncore PMUs, except that I don't know if it is documented anywhere.
Right, we are lacking of the document for the cpumask. I guess I can update it in the
Documentation/ABI/testing/sysfs-bus-event_source-devices-uncore. But it's only for the developer.At the meantime, I think it may be better to show an error/warning if the user inputs are not matched with the cpumask of the requested PMU. That's for the end users.
Quoted 21 lines
Quoted 21 lines
Quoted 21 lines
Quoted 20 lines
But the hybrid pmus make this complex. Maybe we can move the logic in
evlist__fix_hybrid_cpus()here and simplify it like belowif (
evsel->own_cpus) {
if (evsel->pmu->is_hybrid)
evsel->cpus=fixup_hybrid_cpus(evsel>own_cpus, evlist->user_requested_cpus); //? else
evsel->cpus= evlist->own_cpus; // put + get
} else {
evsel->cpus= evlist->user_requested_cpus; // put + get }Then we need to make sure
evsel->pmuis set properly.What do you think?
Quoted 7 lines
Quoted 7 lines
Quoted 6 lines
Hybrid handling looks complicated. I would have to spend time better understanding it.
So, in the context of this patch set, I don't want to look at issues with hybrid CPUs, except that there should be no change to how they are handled.
I think we should at least run perf test on a hybrid machine. We already have some backlog to handle. It's better not to bring more regression issue.
Thanks,Kan
Re: [PATCH V2 22/23] perf tools: Allow system-wide events to keep their own CPUs
Quoted 163 lines · Adrian Hunter
Quoted 162 lines · Kan
Quoted 159 lines · Adrian Hunter
Quoted 136 lines · Namhyung Kim
Quoted 135 lines · Adrian Hunter
Quoted 26 lines · Namhyung Kim
Quoted 25 lines · Adrian Hunter
Currently,
user_requested_cpussupplants system-wide CPUs when the evlisthas_user_cpus. Change that so that system-wide events retain their own CPUs and they are added toall_cpus.Acked-by Ian Rogers <[email protected]>Signed-off-by Adrian Hunter <[email protected]>--- tools/lib/perf/evlist.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-)tools/lib/perf/evlist.c +0
-6@@ -40,12 +40,11 @@ static void __perf_evlist__propagate_maps(struct perf_evlist *evlist,* We already have cpus for evsel (via PMU sysfs) so * keep it, if there's no target cpu list defined. */ - if (!evsel->own_cpus || evlist->has_user_cpus) { - perf_cpu_map__put(evsel->cpus); - evsel->cpus = perf_cpu_map__get(evlist->user_requested_cpus); - } else if (!evsel->system_wide && - !evsel->requires_cpu && - perf_cpu_map__empty(evlist->user_requested_cpus)) {Quoted 8 lines
tools/lib/perf/evlist.c static void __perf_evlist__propagate_maps(struct perf_evlist *evlist, · line 47
Quoted 5 lines
tools/lib/perf/evlist.c +5
-0+ if (!evsel->own_cpus || + (!evsel->system_wide && evlist->has_user_cpus) || + (!evsel->system_wide && + !evsel->requires_cpu && + perf_cpu_map__empty(evlist->user_requested_cpus))) {This is getting hard to understand. IIUC this propagation basically sets user requested cpus to evsel unless it has its own cpus, right?
I put the conditional logic altogether because that is kernel style but it does make it practically unreadable.
If we start with the original logic:
if (!evsel->own_cpus ||
evlist->has_user_cpus) {perf_cpu_map__put(evsel->cpus);
evsel->cpus=perf_cpu_map__get(evlist->user_requested_cpus); } else if (!evsel->system_wide &&perf_cpu_map__empty(evlist->user_requested_cpus)) {perf_cpu_map__put(evsel->cpus);
evsel->cpus=perf_cpu_map__get(evlist->user_requested_cpus); } else if (evsel->cpus!=evsel->own_cpus) {perf_cpu_map__put(evsel->cpus);
evsel->cpus=perf_cpu_map__get(evsel->own_cpus);
}Then make it more readable, i.e. same functionality
struct
perf_cpu_map*cpus;if (!evsel->own_cpus ||
evlist->has_user_cpus)
cpus =evlist->user_requested_cpus;
else if (!evsel->system_wide &&perf_cpu_map__empty(evlist->user_requested_cpus)) cpus =evlist->user_requested_cpus;
else
cpus =evsel->own_cpus;if (
evsel->cpus!= cpus) {perf_cpu_map__put(evsel->cpus);evsel->cpus=perf_cpu_map__get(cpus); }Then separate out the conditions, i.e. still same functionality
if (!evsel->own_cpus)
cpus =evlist->user_requested_cpus;
else if (evlist->has_user_cpus)
cpus =evlist->user_requested_cpus;
else if (evsel->system_wide)
cpus =evsel->own_cpus;
else if (perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus =evlist->user_requested_cpus;
else
cpus =evsel->own_cpus;Then add the new
requires_cpuflag:if (!evsel->own_cpus)
cpus =evlist->user_requested_cpus;
else if (evlist->has_user_cpus)
cpus =evlist->user_requested_cpus;
else if (evsel->system_wide)
cpus =evsel->own_cpus;
- else if (perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */
+ else if (!evsel->requres_cpu &&perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */
cpus =evlist->user_requested_cpus;
else
cpus =evsel->own_cpus;Then make
system_widekeepown_cpuseven ifhas_user_cpus:if (!evsel->own_cpus)
cpus =evlist->user_requested_cpus;
+ else if (evsel->system_wide)
+ cpus =evsel->own_cpus;
else if (evlist->has_user_cpus)
cpus =evlist->user_requested_cpus;
- else if (evsel->system_wide)
- cpus =evsel->own_cpus;
else if (!evsel->requres_cpu &&perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus =evlist->user_requested_cpus;
else
cpus =evsel->own_cpus;Which leaves:
if (!evsel->own_cpus)
cpus =evlist->user_requested_cpus;
else if (evsel->system_wide)
cpus =evsel->own_cpus;
else if (evlist->has_user_cpus)
cpus =evlist->user_requested_cpus;
else if (!evsel->requres_cpu &&perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus =evlist->user_requested_cpus;
else
cpus =evsel->own_cpus;And putting it back together:
if (!evsel->own_cpus ||
(!evsel->system_wide &&evlist->has_user_cpus) || (!evsel->system_wide && !evsel->requires_cpu &&perf_cpu_map__empty(evlist->user_requested_cpus))) { cpus =evlist->user_requested_cpus; else
cpus =evsel->own_cpus;Quoted 6 lines
Quoted 1 line
Perhaps I shouldn't put it together?
Cool, thanks a lot for explaining it in detail. I do not oppose your change but little worried about the complexity. And I think we have some issues with uncore events already.
Yes it is a bit complicated because we are handling many different use cases.
Quoted 3 lines
So do you have any idea where
evsel->own_cpusdoesn't propagate toevsel->cpus?We let the user's list of CPUs override it i.e. the
evlist->has_user_cpuscase. Essentially we are expecting the user to know what they are doing.Quoted 3 lines
I think
evsel->system_wideandevsel->requires_cpucan be replaced to checkevsel->own_cpusinstead.
Quoted 9 lines
Quoted 6 lines
Quoted 2 lines
Not at the moment because we let the user override
own_cpus.Do we check whether the user's input is valid (match the PMU's cpumask) before the override?
I think we know the PMU name. The cpumask of the PMU can be found in the sysfs. So we should have enough information for a sanity check.
For the uncore PMU case, I am not sure what sanity is :-)
For a non-core PMU, e.g., uncore, cstate, power and etc. The cpumask is under the /sys/devices/<PMU>/cpumask. It shows the cpumask which kernel supports. If a end user request a different CPU other that the cpumask, I think it's better throw a waning. It should mitigate the confusion which Namhyung mentioned (uncore -C1,2).
Quoted 3 lines
I don't know about the hybrid case. I suspect it doesn't work because it would need to intersect
own_cpuswithuser_requested_cpusifhas_user_cpus, wouldn't it?
For the hybrid, the cpumask is named as "cpus" under the sysfs. The name is the same for both X86 and Arm. The current kernel will filter out the CPU which is not in the cpumask.
For the tool, I think we can throw a warning as well if the user requests the unsupported CPU.
Actually, there is already a patch to check and print a warning for the hybrid group. See commit 660e533e87ff ("perf stat: Warn group events from different hybrid PMU"), but it's X86 specific.
Maybe we can introduce a generic way by checking the "cpus" of the core PMU for both X86 and Arm. Then the above patch may be dropped.
Thanks,
Kan
Quoted 87 lines
Quoted 86 lines
Quoted 23 lines
Quoted 7 lines
Actually
evlist->has_user_cpusis checked first so uncore events'own_cpusmight not be used.Yes
Quoted 5 lines
In my laptop, perf stat -a -A -e imc/data_reads/ will use cpu 0 as it's listed in the pmu cpumask. But when I use -C1,2 it'll use the both cpus and returns the similar values each (so the sum is 2x).
We expect the user to understand the uncore PMU they are using. AFAICT an uncore PMU cpu mask with only CPU 0 typically means a single PMU that counts events that could be indrectly caused by any CPU. When the cpu mask has more than one CPU, it means a PMU for each of a group of CPU's (e.g. a core or socket)
Quoted 13 lines
So in the example you gave above, there is only 1 PMU and reading from any CPU will give it's value.
A user providing a list of CPUs for uncore events is useful only in certain cases. For example when each core has an uncore PMU and you only want to get values from one core.
Quoted 5 lines
I'm not sure if it's intended. I expect it runs on cpu 0 or one of the given cpus. Or it runs on both cpus and returns value in half so that the sum is the same as the original value (from a cpu).
It runs on CPU0. The kernel will correct the CPU when initializing the event. The uncore is per-die (For the most current platforms, die is the same as socket.). Usually, it runs on the first CPU of a die. For the -C 1,2 uncore/event/ case, the current tool creates two events. One for each CPU. The kernel will find the die ID of the input CPU first, then correct it to the first CPU of the die, which is 0. So from the kernel's perspective, the perf command turns to -C0 uncore/event/ -C0 uncore/event/. That's why you see similar values each. (They should not be exactly the same. That's because they are not in a group.)
Quoted 4 lines
I don't know if there is anything wrong with the way we are handling uncore PMUs, except that I don't know if it is documented anywhere.
Right, we are lacking of the document for the cpumask. I guess I can update it in the
Documentation/ABI/testing/sysfs-bus-event_source-devices-uncore. But it's only for the developer.At the meantime, I think it may be better to show an error/warning if the user inputs are not matched with the cpumask of the requested PMU. That's for the end users.
Quoted 21 lines
Quoted 21 lines
Quoted 21 lines
Quoted 20 lines
But the hybrid pmus make this complex. Maybe we can move the logic in
evlist__fix_hybrid_cpus()here and simplify it like belowif (
evsel->own_cpus) {
if (evsel->pmu->is_hybrid)
evsel->cpus=fixup_hybrid_cpus(evsel>own_cpus, evlist->user_requested_cpus); //? else
evsel->cpus= evlist->own_cpus; // put + get
} else {
evsel->cpus= evlist->user_requested_cpus; // put + get
}Then we need to make sure
evsel->pmuis set properly.What do you think?
Quoted 7 lines
Quoted 7 lines
Quoted 6 lines
Hybrid handling looks complicated. I would have to spend time better understanding it.
So, in the context of this patch set, I don't want to look at issues with hybrid CPUs, except that there should be no change to how they are handled.
I think we should at least run perf test on a hybrid machine. We already have some backlog to handle. It's better not to bring more regression issue.
Thanks,Kan
Adrian Hunter
reviewerRe: [PATCH V2 22/23] perf tools: Allow system-wide events to keep their own CPUs
Quoted 169 lines · Kan
Quoted 166 lines · Adrian Hunter
Quoted 165 lines · Kan
Quoted 161 lines · Adrian Hunter
Quoted 136 lines · Namhyung Kim
Quoted 135 lines · Adrian Hunter
Quoted 26 lines · Namhyung Kim
Quoted 25 lines · Adrian Hunter
Currently,
user_requested_cpussupplants system-wide CPUs when the evlisthas_user_cpus. Change that so that system-wide events retain their own CPUs and they are added toall_cpus.Acked-by Ian Rogers <[email protected]>Signed-off-by Adrian Hunter <[email protected]>---
tools/lib/perf/evlist.c| 11 +++++------1 file changed, 5 insertions(+), 6 deletions(-)tools/lib/perf/evlist.c +0
-6@@ -40,12 +40,11 @@ static void __perf_evlist__propagate_maps(struct perf_evlist *evlist,* We already have cpus for evsel (via PMU sysfs) so * keep it, if there's no target cpu list defined. */ - if (!evsel->own_cpus || evlist->has_user_cpus) { - perf_cpu_map__put(evsel->cpus); - evsel->cpus = perf_cpu_map__get(evlist->user_requested_cpus); - } else if (!evsel->system_wide && - !evsel->requires_cpu && - perf_cpu_map__empty(evlist->user_requested_cpus)) {Quoted 8 lines
tools/lib/perf/evlist.c static void __perf_evlist__propagate_maps(struct perf_evlist *evlist, · line 47
Quoted 5 lines
tools/lib/perf/evlist.c +5
-0+ if (!evsel->own_cpus || + (!evsel->system_wide && evlist->has_user_cpus) || + (!evsel->system_wide && + !evsel->requires_cpu && + perf_cpu_map__empty(evlist->user_requested_cpus))) {This is getting hard to understand. IIUC this propagation basically sets user requested cpus to evsel unless it has its own cpus, right?
I put the conditional logic altogether because that is kernel style but it does make it practically unreadable.
If we start with the original logic:
if (!evsel->own_cpus ||
evlist->has_user_cpus) {perf_cpu_map__put(evsel->cpus);
evsel->cpus=perf_cpu_map__get(evlist->user_requested_cpus); } else if (!evsel->system_wide &&perf_cpu_map__empty(evlist->user_requested_cpus)) {perf_cpu_map__put(evsel->cpus);
evsel->cpus=perf_cpu_map__get(evlist->user_requested_cpus); } else if (evsel->cpus!=evsel->own_cpus) {perf_cpu_map__put(evsel->cpus);
evsel->cpus=perf_cpu_map__get(evsel->own_cpus);
}Then make it more readable, i.e. same functionality
struct
perf_cpu_map*cpus;if (!evsel->own_cpus ||
evlist->has_user_cpus)
cpus =evlist->user_requested_cpus;
else if (!evsel->system_wide &&perf_cpu_map__empty(evlist->user_requested_cpus)) cpus =evlist->user_requested_cpus;
else
cpus =evsel->own_cpus;if (
evsel->cpus!= cpus) {perf_cpu_map__put(evsel->cpus);evsel->cpus=perf_cpu_map__get(cpus); }Then separate out the conditions, i.e. still same functionality
if (!evsel->own_cpus)
cpus =evlist->user_requested_cpus;
else if (evlist->has_user_cpus)
cpus =evlist->user_requested_cpus;
else if (evsel->system_wide)
cpus =evsel->own_cpus;
else if (perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus =evlist->user_requested_cpus;
else
cpus =evsel->own_cpus;Then add the new
requires_cpuflag:if (!evsel->own_cpus)
cpus =evlist->user_requested_cpus;
else if (evlist->has_user_cpus)
cpus =evlist->user_requested_cpus;
else if (evsel->system_wide)
cpus =evsel->own_cpus;
- else if (perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */
+ else if (!evsel->requres_cpu &&perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus =evlist->user_requested_cpus;
else
cpus =evsel->own_cpus;Then make
system_widekeepown_cpuseven ifhas_user_cpus:if (!evsel->own_cpus)
cpus =evlist->user_requested_cpus;
+ else if (evsel->system_wide)
+ cpus =evsel->own_cpus;
else if (evlist->has_user_cpus)
cpus =evlist->user_requested_cpus;
- else if (evsel->system_wide)
- cpus =evsel->own_cpus;
else if (!evsel->requres_cpu &&perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus =evlist->user_requested_cpus;
else
cpus =evsel->own_cpus;Which leaves:
if (!evsel->own_cpus)
cpus =evlist->user_requested_cpus;
else if (evsel->system_wide)
cpus =evsel->own_cpus;
else if (evlist->has_user_cpus)
cpus =evlist->user_requested_cpus;
else if (!evsel->requres_cpu &&perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus =evlist->user_requested_cpus;
else
cpus =evsel->own_cpus;And putting it back together:
if (!evsel->own_cpus ||
(!evsel->system_wide &&evlist->has_user_cpus) || (!evsel->system_wide && !evsel->requires_cpu &&perf_cpu_map__empty(evlist->user_requested_cpus))) { cpus =evlist->user_requested_cpus; else
cpus =evsel->own_cpus;Quoted 6 lines
Quoted 1 line
Perhaps I shouldn't put it together?
Cool, thanks a lot for explaining it in detail. I do not oppose your change but little worried about the complexity. And I think we have some issues with uncore events already.
Yes it is a bit complicated because we are handling many different use cases.
Quoted 3 lines
So do you have any idea where
evsel->own_cpusdoesn't propagate toevsel->cpus?We let the user's list of CPUs override it i.e. the
evlist->has_user_cpuscase. Essentially we are expecting the user to know what they are doing.Quoted 3 lines
I think
evsel->system_wideandevsel->requires_cpucan be replaced to checkevsel->own_cpusinstead.Not at the moment because we let the user override
own_cpus.
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
Do we check whether the user's input is valid (match the PMU's cpumask) before the override?
I think we know the PMU name. The cpumask of the PMU can be found in the sysfs. So we should have enough information for a sanity check.
For the uncore PMU case, I am not sure what sanity is :-)
For a non-core PMU, e.g., uncore, cstate, power and etc. The cpumask is under the /sys/devices/<PMU>/cpumask. It shows the cpumask which kernel supports. If a end user request a different CPU other that the cpumask, I think it's better throw a waning. It should mitigate the confusion which Namhyung mentioned (uncore -C1,2).
So you couldn't get uncore events unless you are also coincidentally wanting to trace CPU 0.
I guess really the requrement is not to perf_event_open() an uncore PMU more than once? To figure that out we'd need to be able map CPUs to uncore PMUs?
Quoted 8 lines
Quoted 4 lines
I don't know about the hybrid case. I suspect it doesn't work because it would need to intersect
own_cpuswithuser_requested_cpusifhas_user_cpus, wouldn't it?For the hybrid, the cpumask is named as "cpus" under the sysfs. The name is the same for both X86 and Arm. The current kernel will filter out the CPU which is not in the cpumask.
For the tool, I think we can throw a warning as well if the user requests the unsupported CPU.
Ok, I was assuming we were using atom and core PMUs at the same time, so if the user asks for some of each that should be fine.
Quoted 95 lines
Actually, there is already a patch to check and print a warning for the hybrid group. See commit
660e533e87ff("perf stat: Warn group events from different hybrid PMU"), but it's X86 specific.Maybe we can introduce a generic way by checking the "cpus" of the core PMU for both X86 and Arm. Then the above patch may be dropped.
Thanks,
KanQuoted 87 lines
Quoted 86 lines
Quoted 23 lines
Quoted 7 lines
Actually
evlist->has_user_cpusis checked first so uncore events'own_cpusmight not be used.Yes
Quoted 5 lines
In my laptop, perf stat -a -A -e imc/data_reads/ will use cpu 0 as it's listed in the pmu cpumask. But when I use -C1,2 it'll use the both cpus and returns the similar values each (so the sum is 2x).
We expect the user to understand the uncore PMU they are using. AFAICT an uncore PMU cpu mask with only CPU 0 typically means a single PMU that counts events that could be indrectly caused by any CPU. When the cpu mask has more than one CPU, it means a PMU for each of a group of CPU's (e.g. a core or socket)
Quoted 13 lines
So in the example you gave above, there is only 1 PMU and reading from any CPU will give it's value.
A user providing a list of CPUs for uncore events is useful only in certain cases. For example when each core has an uncore PMU and you only want to get values from one core.
Quoted 5 lines
I'm not sure if it's intended. I expect it runs on cpu 0 or one of the given cpus. Or it runs on both cpus and returns value in half so that the sum is the same as the original value (from a cpu).
It runs on CPU0. The kernel will correct the CPU when initializing the event. The uncore is per-die (For the most current platforms, die is the same as socket.). Usually, it runs on the first CPU of a die. For the -C 1,2 uncore/event/ case, the current tool creates two events. One for each CPU. The kernel will find the die ID of the input CPU first, then correct it to the first CPU of the die, which is 0. So from the kernel's perspective, the perf command turns to -C0 uncore/event/ -C0 uncore/event/. That's why you see similar values each. (They should not be exactly the same. That's because they are not in a group.)
Quoted 4 lines
I don't know if there is anything wrong with the way we are handling uncore PMUs, except that I don't know if it is documented anywhere.
Right, we are lacking of the document for the cpumask. I guess I can update it in the
Documentation/ABI/testing/sysfs-bus-event_source-devices-uncore. But it's only for the developer.At the meantime, I think it may be better to show an error/warning if the user inputs are not matched with the cpumask of the requested PMU. That's for the end users.
Quoted 21 lines
Quoted 21 lines
Quoted 21 lines
Quoted 20 lines
But the hybrid pmus make this complex. Maybe we can move the logic in
evlist__fix_hybrid_cpus()here and simplify it like belowif (
evsel->own_cpus) {
if (evsel->pmu->is_hybrid)
evsel->cpus=fixup_hybrid_cpus(evsel>own_cpus, evlist->user_requested_cpus); //? else
evsel->cpus= evlist->own_cpus; // put + get
} else {
evsel->cpus= evlist->user_requested_cpus; // put + get }Then we need to make sure
evsel->pmuis set properly.What do you think?
Quoted 7 lines
Quoted 7 lines
Quoted 6 lines
Hybrid handling looks complicated. I would have to spend time better understanding it.
So, in the context of this patch set, I don't want to look at issues with hybrid CPUs, except that there should be no change to how they are handled.
I think we should at least run perf test on a hybrid machine. We already have some backlog to handle. It's better not to bring more regression issue.
Thanks,Kan
Namhyung Kim
maintainerRe: [PATCH V2 22/23] perf tools: Allow system-wide events to keep their own CPUs
Quoted 178 lines · Adrian Hunter
Quoted 176 lines · Kan
Quoted 172 lines · Adrian Hunter
Quoted 162 lines · Kan
Quoted 159 lines · Adrian Hunter
Quoted 136 lines · Namhyung Kim
Quoted 135 lines · Adrian Hunter
Quoted 26 lines · Namhyung Kim
Quoted 25 lines · Adrian Hunter
Currently,
user_requested_cpussupplants system-wide CPUs when the evlisthas_user_cpus. Change that so that system-wide events retain their own CPUs and they are added toall_cpus.Acked-by Ian Rogers <[email protected]>Signed-off-by Adrian Hunter <[email protected]>--- tools/lib/perf/evlist.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-)tools/lib/perf/evlist.c +0
-6@@ -40,12 +40,11 @@ static void __perf_evlist__propagate_maps(struct perf_evlist *evlist,* We already have cpus for evsel (via PMU sysfs) so * keep it, if there's no target cpu list defined. */ -if (!evsel->own_cpus || evlist->has_user_cpus) { -perf_cpu_map__put (evsel->cpus); - evsel->cpus =perf_cpu_map__get (evlist->user_requested_cpus); - }else if (!evsel->system_wide && - !evsel->requires_cpu && -perf_cpu_map__empty (evlist->user_requested_cpus)) {Quoted 8 lines
tools/lib/perf/evlist.c static void __perf_evlist__propagate_maps(struct perf_evlist *evlist, · line 47
Quoted 5 lines
tools/lib/perf/evlist.c +5
-0+if (!evsel->own_cpus || + (!evsel->system_wide && evlist->has_user_cpus) || + (!evsel->system_wide && + !evsel->requires_cpu && +perf_cpu_map__empty (evlist->user_requested_cpus))) {This is getting hard to understand. IIUC this propagation basically sets user requested cpus to evsel unless it has its own cpus, right?
I put the conditional logic altogether because that is kernel style but it does make it practically unreadable.
If we start with the original logic:
if (!evsel->own_cpus || evlist->has_user_cpus) { perf_cpu_map__put(evsel->cpus); evsel->cpus = perf_cpu_map__get(evlist->user_requested_cpus); } else if (!evsel->system_wide && perf_cpu_map__empty(evlist->user_requested_cpus)) { perf_cpu_map__put(evsel->cpus); evsel->cpus = perf_cpu_map__get(evlist->user_requested_cpus); } else if (evsel->cpus != evsel->own_cpus) { perf_cpu_map__put(evsel->cpus); evsel->cpus = perf_cpu_map__get(evsel->own_cpus); }Then make it more readable, i.e. same functionality
struct perf_cpu_map *cpus; if (!evsel->own_cpus || evlist->has_user_cpus) cpus = evlist->user_requested_cpus; else if (!evsel->system_wide && perf_cpu_map__empty(evlist->user_requested_cpus)) cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus; if (evsel->cpus != cpus) { perf_cpu_map__put(evsel->cpus); evsel->cpus = perf_cpu_map__get(cpus); }Then separate out the conditions, i.e. still same functionality
if (!evsel->own_cpus) cpus = evlist->user_requested_cpus; else if (evlist->has_user_cpus) cpus = evlist->user_requested_cpus; else if (evsel->system_wide) cpus = evsel->own_cpus; else if (perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus;Then add the new
requires_cpuflag:if (!evsel->own_cpus) cpus = evlist->user_requested_cpus; else if (evlist->has_user_cpus) cpus = evlist->user_requested_cpus; else if (evsel->system_wide) cpus = evsel->own_cpus;(quoted diff) +1
-1- else if (perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ + else if (!evsel->requres_cpu && perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus;Then make
system_widekeepown_cpuseven ifhas_user_cpus:if (!evsel->own_cpus) cpus = evlist->user_requested_cpus;(quoted diff) +2
-2+ else if (evsel->system_wide) + cpus = evsel->own_cpus; else if (evlist->has_user_cpus) cpus = evlist->user_requested_cpus; - else if (evsel->system_wide) - cpus = evsel->own_cpus; else if (!evsel->requres_cpu && perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus;Which leaves:
if (!evsel->own_cpus) cpus = evlist->user_requested_cpus; else if (evsel->system_wide) cpus = evsel->own_cpus; else if (evlist->has_user_cpus) cpus = evlist->user_requested_cpus; else if (!evsel->requres_cpu && perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus;And putting it back together:
if (!evsel->own_cpus || (!evsel->system_wide && evlist->has_user_cpus) || (!evsel->system_wide && !evsel->requires_cpu && perf_cpu_map__empty(evlist->user_requested_cpus))) { cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus;Quoted 6 lines
Quoted 1 line
Perhaps I shouldn't put it together?
Cool, thanks a lot for explaining it in detail. I do not oppose your change but little worried about the complexity. And I think we have some issues with uncore events already.
Yes it is a bit complicated because we are handling many different use cases.
Quoted 3 lines
So do you have any idea where
evsel->own_cpusdoesn't propagate toevsel->cpus?We let the user's list of CPUs override it i.e. the
evlist->has_user_cpuscase. Essentially we are expecting the user to know what they are doing.Quoted 3 lines
I think
evsel->system_wideandevsel->requires_cpucan be replaced to checkevsel->own_cpusinstead.Quoted 6 lines
Quoted 2 lines
Not at the moment because we let the user override
own_cpus.Do we check whether the user's input is valid (match the PMU's cpumask) before the override?
I think we know the PMU name. The cpumask of the PMU can be found in the sysfs. So we should have enough information for a sanity check.
For the uncore PMU case, I am not sure what sanity is :-)
Quoted 6 lines
Quoted 1 line
For a non-core PMU, e.g., uncore, cstate, power and etc. The cpumask is under the /sys/devices/<PMU>/cpumask. It shows the cpumask which kernel supports. If a end user request a different CPU other that the cpumask, I think it's better throw a waning. It should mitigate the confusion which Namhyung mentioned (uncore -C1,2).
So you couldn't get uncore events unless you are also coincidentally wanting to trace CPU 0.
I guess really the requrement is not to
perf_event_open()an uncore PMU more than once? To figure that out we'd need to be able map CPUs to uncore PMUs?
We might just use evsel->own_cpus for uncore events and if the user-given cpu list contains other cpus it can show an warning.
Thanks,
Namhyung
Re: [PATCH V2 22/23] perf tools: Allow system-wide events to keep their own CPUs
Quoted 181 lines · Namhyung Kim
Quoted 180 lines · Adrian Hunter
Quoted 177 lines · Kan
Quoted 163 lines · Adrian Hunter
Quoted 162 lines · Kan
Quoted 159 lines · Adrian Hunter
Quoted 136 lines · Namhyung Kim
Quoted 135 lines · Adrian Hunter
Quoted 26 lines · Namhyung Kim
Quoted 25 lines · Adrian Hunter
Currently,
user_requested_cpussupplants system-wide CPUs when the evlisthas_user_cpus. Change that so that system-wide events retain their own CPUs and they are added toall_cpus.Acked-by Ian Rogers <[email protected]>Signed-off-by Adrian Hunter <[email protected]>--- tools/lib/perf/evlist.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-)tools/lib/perf/evlist.c +0
-6@@ -40,12 +40,11 @@ static void __perf_evlist__propagate_maps(struct perf_evlist *evlist,* We already have cpus for evsel (via PMU sysfs) so * keep it, if there's no target cpu list defined. */ -if (!evsel->own_cpus || evlist->has_user_cpus) { -perf_cpu_map__put (evsel->cpus); - evsel->cpus =perf_cpu_map__get (evlist->user_requested_cpus); - }else if (!evsel->system_wide && - !evsel->requires_cpu && -perf_cpu_map__empty (evlist->user_requested_cpus)) {Quoted 8 lines
tools/lib/perf/evlist.c static void __perf_evlist__propagate_maps(struct perf_evlist *evlist, · line 47
Quoted 5 lines
tools/lib/perf/evlist.c +5
-0+if (!evsel->own_cpus || + (!evsel->system_wide && evlist->has_user_cpus) || + (!evsel->system_wide && + !evsel->requires_cpu && +perf_cpu_map__empty (evlist->user_requested_cpus))) {This is getting hard to understand. IIUC this propagation basically sets user requested cpus to evsel unless it has its own cpus, right?
I put the conditional logic altogether because that is kernel style but it does make it practically unreadable.
If we start with the original logic:
if (!evsel->own_cpus || evlist->has_user_cpus) { perf_cpu_map__put(evsel->cpus); evsel->cpus = perf_cpu_map__get(evlist->user_requested_cpus); } else if (!evsel->system_wide && perf_cpu_map__empty(evlist->user_requested_cpus)) { perf_cpu_map__put(evsel->cpus); evsel->cpus = perf_cpu_map__get(evlist->user_requested_cpus); } else if (evsel->cpus != evsel->own_cpus) { perf_cpu_map__put(evsel->cpus); evsel->cpus = perf_cpu_map__get(evsel->own_cpus); }Then make it more readable, i.e. same functionality
struct perf_cpu_map *cpus; if (!evsel->own_cpus || evlist->has_user_cpus) cpus = evlist->user_requested_cpus; else if (!evsel->system_wide && perf_cpu_map__empty(evlist->user_requested_cpus)) cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus; if (evsel->cpus != cpus) { perf_cpu_map__put(evsel->cpus); evsel->cpus = perf_cpu_map__get(cpus); }Then separate out the conditions, i.e. still same functionality
if (!evsel->own_cpus) cpus = evlist->user_requested_cpus; else if (evlist->has_user_cpus) cpus = evlist->user_requested_cpus; else if (evsel->system_wide) cpus = evsel->own_cpus; else if (perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus;Then add the new
requires_cpuflag:if (!evsel->own_cpus) cpus = evlist->user_requested_cpus; else if (evlist->has_user_cpus) cpus = evlist->user_requested_cpus; else if (evsel->system_wide) cpus = evsel->own_cpus;(quoted diff) +1
-1- else if (perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ + else if (!evsel->requres_cpu && perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus;Then make
system_widekeepown_cpuseven ifhas_user_cpus:if (!evsel->own_cpus) cpus = evlist->user_requested_cpus;(quoted diff) +2
-2+ else if (evsel->system_wide) + cpus = evsel->own_cpus; else if (evlist->has_user_cpus) cpus = evlist->user_requested_cpus; - else if (evsel->system_wide) - cpus = evsel->own_cpus; else if (!evsel->requres_cpu && perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus;Which leaves:
if (!evsel->own_cpus) cpus = evlist->user_requested_cpus; else if (evsel->system_wide) cpus = evsel->own_cpus; else if (evlist->has_user_cpus) cpus = evlist->user_requested_cpus; else if (!evsel->requres_cpu && perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus;And putting it back together:
if (!evsel->own_cpus || (!evsel->system_wide && evlist->has_user_cpus) || (!evsel->system_wide && !evsel->requires_cpu && perf_cpu_map__empty(evlist->user_requested_cpus))) { cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus;Quoted 6 lines
Quoted 1 line
Perhaps I shouldn't put it together?
Cool, thanks a lot for explaining it in detail. I do not oppose your change but little worried about the complexity. And I think we have some issues with uncore events already.
Yes it is a bit complicated because we are handling many different use cases.
Quoted 3 lines
So do you have any idea where
evsel->own_cpusdoesn't propagate toevsel->cpus?We let the user's list of CPUs override it i.e. the
evlist->has_user_cpuscase. Essentially we are expecting the user to know what they are doing.Quoted 3 lines
I think
evsel->system_wideandevsel->requires_cpucan be replaced to checkevsel->own_cpusinstead.Quoted 9 lines
Quoted 6 lines
Quoted 2 lines
Not at the moment because we let the user override
own_cpus.Do we check whether the user's input is valid (match the PMU's cpumask) before the override?
I think we know the PMU name. The cpumask of the PMU can be found in the sysfs. So we should have enough information for a sanity check.
For the uncore PMU case, I am not sure what sanity is :-)
For a non-core PMU, e.g., uncore, cstate, power and etc. The cpumask is under the /sys/devices/<PMU>/cpumask. It shows the cpumask which kernel supports. If a end user request a different CPU other that the cpumask, I think it's better throw a waning. It should mitigate the confusion which Namhyung mentioned (uncore -C1,2).
Quoted 9 lines
Quoted 4 lines
So you couldn't get uncore events unless you are also coincidentally wanting to trace CPU 0.
I guess really the requrement is not to
perf_event_open()an uncore PMU more than once? To figure that out we'd need to be able map CPUs to uncore PMUs?We might just use
evsel->own_cpusfor uncore events and if the user-given cpu list contains other cpus it can show an warning.
Yes, it sounds reasonable.
Thanks,
Kan
Arnaldo Carvalho de Melo
maintainerRe: [PATCH V2 22/23] perf tools: Allow system-wide events to keep their own CPUs
In reply to Adrian HunterEm Fri, May 13, 2022 at 07:48:40AM +0300, Adrian Hunter escreveu:
Quoted 190 lines · Namhyung Kim
Quoted 136 lines · Adrian Hunter
Quoted 135 lines · Namhyung Kim
Quoted 26 lines · Adrian Hunter
Quoted 25 lines
Currently,
user_requested_cpussupplants system-wide CPUs when the evlisthas_user_cpus. Change that so that system-wide events retain their own CPUs and they are added toall_cpus.Acked-by Ian Rogers <[email protected]>Signed-off-by Adrian Hunter <[email protected]>--- tools/lib/perf/evlist.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-)tools/lib/perf/evlist.c +0
-6@@ -40,12 +40,11 @@ static void __perf_evlist__propagate_maps(struct perf_evlist *evlist,* We already have cpus for evsel (via PMU sysfs) so * keep it, if there's no target cpu list defined. */ -if (!evsel->own_cpus || evlist->has_user_cpus) { -perf_cpu_map__put (evsel->cpus); - evsel->cpus =perf_cpu_map__get (evlist->user_requested_cpus); - }else if (!evsel->system_wide && - !evsel->requires_cpu && -perf_cpu_map__empty (evlist->user_requested_cpus)) {Quoted 8 lines
tools/lib/perf/evlist.c static void __perf_evlist__propagate_maps(struct perf_evlist *evlist, · line 47
Quoted 5 lines
tools/lib/perf/evlist.c +5
-0+if (!evsel->own_cpus || + (!evsel->system_wide && evlist->has_user_cpus) || + (!evsel->system_wide && + !evsel->requires_cpu && +perf_cpu_map__empty (evlist->user_requested_cpus))) {This is getting hard to understand. IIUC this propagation basically sets user requested cpus to evsel unless it has its own cpus, right?
I put the conditional logic altogether because that is kernel style but it does make it practically unreadable.
If we start with the original logic:
if (!evsel->own_cpus || evlist->has_user_cpus) { perf_cpu_map__put(evsel->cpus); evsel->cpus = perf_cpu_map__get(evlist->user_requested_cpus); } else if (!evsel->system_wide && perf_cpu_map__empty(evlist->user_requested_cpus)) { perf_cpu_map__put(evsel->cpus); evsel->cpus = perf_cpu_map__get(evlist->user_requested_cpus); } else if (evsel->cpus != evsel->own_cpus) { perf_cpu_map__put(evsel->cpus); evsel->cpus = perf_cpu_map__get(evsel->own_cpus); }Then make it more readable, i.e. same functionality
struct perf_cpu_map *cpus; if (!evsel->own_cpus || evlist->has_user_cpus) cpus = evlist->user_requested_cpus; else if (!evsel->system_wide && perf_cpu_map__empty(evlist->user_requested_cpus)) cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus; if (evsel->cpus != cpus) { perf_cpu_map__put(evsel->cpus); evsel->cpus = perf_cpu_map__get(cpus); }Then separate out the conditions, i.e. still same functionality
if (!evsel->own_cpus) cpus = evlist->user_requested_cpus; else if (evlist->has_user_cpus) cpus = evlist->user_requested_cpus; else if (evsel->system_wide) cpus = evsel->own_cpus; else if (perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus;Then add the new
requires_cpuflag:if (!evsel->own_cpus) cpus = evlist->user_requested_cpus; else if (evlist->has_user_cpus) cpus = evlist->user_requested_cpus; else if (evsel->system_wide) cpus = evsel->own_cpus;(quoted diff) +1
-1- else if (perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ + else if (!evsel->requres_cpu && perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus;Then make
system_widekeepown_cpuseven ifhas_user_cpus:if (!evsel->own_cpus) cpus = evlist->user_requested_cpus;(quoted diff) +2
-2+ else if (evsel->system_wide) + cpus = evsel->own_cpus; else if (evlist->has_user_cpus) cpus = evlist->user_requested_cpus; - else if (evsel->system_wide) - cpus = evsel->own_cpus; else if (!evsel->requres_cpu && perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus;Which leaves:
if (!evsel->own_cpus) cpus = evlist->user_requested_cpus; else if (evsel->system_wide) cpus = evsel->own_cpus; else if (evlist->has_user_cpus) cpus = evlist->user_requested_cpus; else if (!evsel->requres_cpu && perf_cpu_map__empty(evlist->user_requested_cpus)) /* per-thread */ cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus;And putting it back together:
if (!evsel->own_cpus || (!evsel->system_wide && evlist->has_user_cpus) || (!evsel->system_wide && !evsel->requires_cpu && perf_cpu_map__empty(evlist->user_requested_cpus))) { cpus = evlist->user_requested_cpus; else cpus = evsel->own_cpus;Quoted 6 lines
Quoted 1 line
Perhaps I shouldn't put it together?
Cool, thanks a lot for explaining it in detail. I do not oppose your change but little worried about the complexity. And I think we have some issues with uncore events already.
Yes it is a bit complicated because we are handling many different use cases.
Quoted 3 lines
So do you have any idea where
evsel->own_cpusdoesn't propagate toevsel->cpus?We let the user's list of CPUs override it i.e. the
evlist->has_user_cpuscase. Essentially we are expecting the user to know what they are doing.Quoted 3 lines
I think
evsel->system_wideandevsel->requires_cpucan be replaced to checkevsel->own_cpusinstead.Not at the moment because we let the user override
own_cpus.Quoted 3 lines
Actually
evlist->has_user_cpusis checked first so uncore events'own_cpusmight not be used.Yes
Quoted 5 lines
In my laptop, perf stat -a -A -e imc/data_reads/ will use cpu 0 as it's listed in the pmu cpumask. But when I use -C1,2 it'll use the both cpus and returns the similar values each (so the sum is 2x).
We expect the user to understand the uncore PMU they are using. AFAICT an uncore PMU cpu mask with only CPU 0 typically means a single PMU that counts events that could be indrectly caused by any CPU. When the cpu mask has more than one CPU, it means a PMU for each of a group of CPU's (e.g. a core or socket)
So in the example you gave above, there is only 1 PMU and reading from any CPU will give it's value.
A user providing a list of CPUs for uncore events is useful only in certain cases. For example when each core has an uncore PMU and you only want to get values from one core.
Quoted 1 line
Quoted 8 lines
Quoted 4 lines
I'm not sure if it's intended. I expect it runs on cpu 0 or one of the given cpus. Or it runs on both cpus and returns value in half so that the sum is the same as the original value (from a cpu).
I don't know if there is anything wrong with the way we are handling uncore PMUs, except that I don't know if it is documented anywhere.
Good thing about this conversation is that it will result in documentation :-)
Thank you guys for having it and detailing it so nicely.
- Arnaldo
Quoted 31 lines
Quoted 31 lines
Quoted 18 lines
Quoted 18 lines
But the hybrid pmus make this complex. Maybe we can move the logic in
evlist__fix_hybrid_cpus()here and simplify it like belowif (evsel->own_cpus) { if (evsel->pmu->is_hybrid) evsel->cpus = fixup_hybrid_cpus(evsel>own_cpus, evlist->user_requested_cpus); //? else evsel->cpus = evlist->own_cpus; // put + get } else {
evsel->cpus=evlist->user_requested_cpus; // put + get
}Then we need to make sure
evsel->pmuis set properly.Quoted 8 lines
Quoted 1 line
What do you think?
Hybrid handling looks complicated. I would have to spend time better understanding it.
So, in the context of this patch set, I don't want to look at issues with hybrid CPUs, except that there should be no change to how they are handled.
Fair enough. But I think we have to look at it again soon.
Thanks,
Namhyung
Re: [PATCH V2 22/23] perf tools: Allow system-wide events to keep their own CPUs
Quoted 8 lines · Arnaldo Carvalho de Melo
Em Fri, May 13, 2022 at 07:48:40AM +0300, Adrian Hunter escreveu:
Quoted 6 lines · Namhyung Kim
Quoted 4 lines
I'm not sure if it's intended. I expect it runs on cpu 0 or one of the given cpus. Or it runs on both cpus and returns value in half so that the sum is the same as the original value (from a cpu).
Quoted 8 lines
Quoted 3 lines
I don't know if there is anything wrong with the way we are handling uncore PMUs, except that I don't know if it is documented anywhere.
Good thing about this conversation is that it will result in documentation :-)
Thank you guys for having it and detailing it so nicely.
To move things forward,
for the patchset. I'll try to cleanup the cpu map propagation with hybrid events later.
Thanks,
Namhyung