powerpc/52xx: Remove dead code, i.e. mpc52xx_get_xtal_freq()
Subsystems (11)
PATCH v2 1/4 powerpc/52xx: Remove dead code, i.e. mpc52xx_get_xtal_freq()
It seems mpc52xx_get_xtal_freq() is not used anywhere. Remove dead code.
---
v2: collected tags
arch/powerpc/include/asm/mpc52xx.h | 1 - arch/powerpc/platforms/52xx/mpc52xx_common.c | 37 -------------------- 2 files changed, 38 deletions(-)
arch/powerpc/include/asm/mpc52xx.h +0 -1
@@ -274,7 +274,6 @@ extern void mpc52xx_declare_of_platform_devices(void);extern int mpc5200_psc_ac97_gpio_reset (int psc_number);extern void mpc52xx_map_common_devices (void );extern int mpc52xx_set_psc_clkdiv (int psc_id,int clkdiv); -extern unsigned int mpc52xx_get_xtal_freq (struct device_node *node);extern void __noreturn mpc52xx_restart (char *cmd);/* mpc52xx_gpt.c */
arch/powerpc/platforms/52xx/mpc52xx_common.c +0 -37
@@ -203,43 +203,6 @@ int mpc52xx_set_psc_clkdiv(int psc_id, int clkdiv) }EXPORT_SYMBOL (mpc52xx_set_psc_clkdiv); -/** -* mpc52xx_get_xtal_freq - Get SYS_XTAL_IN frequency for a device -* -* @node: device node -* -* Returns the frequency of the external oscillator clock connected -* to the SYS_XTAL_IN pin, or 0 if it cannot be determined. -*/ -unsigned int mpc52xx_get_xtal_freq (struct device_node *node) -{ -u32 val; -unsigned int freq; - -if (!mpc52xx_cdm) -return 0 ; - - freq =mpc5xxx_get_bus_frequency (node); -if (!freq) -return 0 ; - -if (in_8 (&mpc52xx_cdm->ipb_clk_sel) &0x1 ) - freq *=2 ; - - val =in_be32 (&mpc52xx_cdm->rstcfg); -if (val & (1 <<5 )) - freq *=8 ; -else - freq *=4 ; -if (val & (1 <<6 )) - freq /=12 ; -else - freq /=16 ; - -return freq; -} -EXPORT_SYMBOL (mpc52xx_get_xtal_freq); -/** * mpc52xx_restart: ppc_md->restart hook for mpc5200 using the watchdog timer */
Signature · 1 line
2.35.1
PATCH v2 2/4 powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode
Switch mpc5xxx_get_bus_frequency() to use fwnode in order to help cleaning up other parts of the kernel from OF specific code.
No functional change intended.
---
v2: collected tags, fixed compilation error (LKP, Chris)
arch/powerpc/include/asm/mpc5xxx.h | 9 +++- arch/powerpc/platforms/52xx/mpc52xx_gpt.c | 2 +- arch/powerpc/sysdev/mpc5xxx_clocks.c | 41 ++++++++++--------- drivers/ata/pata_mpc52xx.c | 2 +- drivers/i2c/busses/i2c-mpc.c | 7 ++-- drivers/net/can/mscan/mpc5xxx_can.c | 2 +- drivers/net/ethernet/freescale/fec_mpc52xx.c | 2 +- .../net/ethernet/freescale/fec_mpc52xx_phy.c | 3 +- .../net/ethernet/freescale/fs_enet/mii-fec.c | 4 +- drivers/spi/spi-mpc52xx.c | 2 +- drivers/tty/serial/mpc52xx_uart.c | 4 +- 11 files changed, 44 insertions(+), 34 deletions(-)
arch/powerpc/include/asm/mpc5xxx.h +8 -1
@@ -11,7 +11,14 @@#ifndef __ASM_POWERPC_MPC5xxx_H__#define __ASM_POWERPC_MPC5xxx_H__ -extern unsigned long mpc5xxx_get_bus_frequency (struct device_node *node); +#include <linux/property.h> + +unsigned long mpc5xxx_fwnode_get_bus_frequency (struct fwnode_handle *fwnode); + +static inline unsigned long mpc5xxx_get_bus_frequency (struct device *dev) +{ +return mpc5xxx_fwnode_get_bus_frequency (dev_fwnode (dev)); +}#endif /* __ASM_POWERPC_MPC5xxx_H__ */
arch/powerpc/platforms/52xx/mpc52xx_gpt.c +1 -1
@@ -720,7 +720,7 @@ static int mpc52xx_gpt_probe(struct platform_device *ofdev)raw_spin_lock_init (&gpt->lock); gpt->dev = &ofdev->dev; - gpt->ipb_freq =mpc5xxx_get_bus_frequency (ofdev->dev.of_node); + gpt->ipb_freq =mpc5xxx_get_bus_frequency (&ofdev->dev); gpt->regs =of_iomap (ofdev->dev.of_node,0 );if (!gpt->regs)return -ENOMEM ;
arch/powerpc/sysdev/mpc5xxx_clocks.c +22 -19
53 lines not on this page · raw message
drivers/ata/pata_mpc52xx.c +1 -1
@@ -683,7 +683,7 @@ static int mpc52xx_ata_probe(struct platform_device *op)struct bcom_task *dmatsk;/* Get ipb frequency */ - ipb_freq =mpc5xxx_get_bus_frequency (op->dev.of_node); + ipb_freq =mpc5xxx_get_bus_frequency (&op->dev);if (!ipb_freq) {dev_err (&op->dev,"could not determine IPB bus frequency\n" );return -ENODEV ;
drivers/i2c/busses/i2c-mpc.c +4 -3
@@ -239,6 +239,7 @@ static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = {static int mpc_i2c_get_fdr_52xx (struct device_node *node,u32 clock,u32 *real_clk) { +struct fwnode_handle *fwnode =of_fwnode_handle (node);const struct mpc_i2c_divider *div =NULL ;unsigned int pvr =mfspr (SPRN_PVR );u32 divider;
@@ -246,12 +247,12 @@ static int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock,if (clock ==MPC_I2C_CLOCK_LEGACY ) {/* see below - default fdr = 0x3f -> div = 2048 */ - *real_clk =mpc5xxx_get_bus_frequency (node) /2048 ; + *real_clk =mpc5xxx_fwnode_get_bus_frequency (fwnode) /2048 ;return -EINVAL ; }/* Determine divider value */ - divider =mpc5xxx_get_bus_frequency (node) / clock; + divider =mpc5xxx_fwnode_get_bus_frequency (fwnode) / clock;/* * We want to choose an FDR/DFSR that generates an I2C bus speed that
@@ -266,7 +267,7 @@ static int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock,break ; } - *real_clk =mpc5xxx_get_bus_frequency (node) / div->divider; + *real_clk =mpc5xxx_fwnode_get_bus_frequency (fwnode) / div->divider;return (int )div->fdr; }
drivers/net/can/mscan/mpc5xxx_can.c +1 -1
@@ -63,7 +63,7 @@ static u32 mpc52xx_can_get_clock(struct platform_device *ofdev,else *mscan_clksrc =MSCAN_CLKSRC_XTAL ; - freq =mpc5xxx_get_bus_frequency (ofdev->dev.of_node); + freq =mpc5xxx_get_bus_frequency (&ofdev->dev);if (!freq)return 0 ;
drivers/net/ethernet/freescale/fec_mpc52xx.c +1 -1
@@ -922,7 +922,7 @@ static int mpc52xx_fec_probe(struct platform_device *op)/* Start with safe defaults for link connection */ priv->speed =100 ; priv->duplex =DUPLEX_HALF ; - priv->mdio_speed = ((mpc5xxx_get_bus_frequency (np) >>20 ) /5 ) <<1 ; + priv->mdio_speed = ((mpc5xxx_get_bus_frequency (&op->dev) >>20 ) /5 ) <<1 ;/* The current speed preconfigures the speed of the MII link */ prop =of_get_property (np,"current-speed" , &prop_size);
drivers/net/ethernet/freescale/fec_mpc52xx_phy.c +1 -2
@@ -99,8 +99,7 @@ static int mpc52xx_fec_mdio_probe(struct platform_device *of)dev_set_drvdata (dev, bus);/* set MII speed */ -out_be32 (&priv->regs->mii_speed, - ((mpc5xxx_get_bus_frequency (of->dev.of_node) >>20 ) /5 ) <<1 ); +out_be32 (&priv->regs->mii_speed, ((mpc5xxx_get_bus_frequency (dev) >>20 ) /5 ) <<1 ); err =of_mdiobus_register (bus, np);if (err)
drivers/net/ethernet/freescale/fs_enet/mii-fec.c +2 -2
@@ -102,7 +102,7 @@ static int fs_enet_mdio_probe(struct platform_device *ofdev)struct resource res;struct mii_bus *new_bus;struct fec_info *fec; -int (*get_bus_freq)(struct device_node *); +int (*get_bus_freq)(struct device *);int ret = -ENOMEM , clock, speed; match =of_match_device (fs_enet_mdio_fec_match, &ofdev->dev);
@@ -136,7 +136,7 @@ static int fs_enet_mdio_probe(struct platform_device *ofdev) }if (get_bus_freq) { - clock =get_bus_freq (ofdev->dev.of_node); + clock =get_bus_freq (&ofdev->dev);if (!clock) {/* Use maximum divider if clock is unknown */ dev_warn (&ofdev->dev,"could not determine IPS clock\n" );
drivers/spi/spi-mpc52xx.c +1 -1
@@ -437,7 +437,7 @@ static int mpc52xx_spi_probe(struct platform_device *op) ms->irq0 =irq_of_parse_and_map (op->dev.of_node,0 ); ms->irq1 =irq_of_parse_and_map (op->dev.of_node,1 ); ms->state = mpc52xx_spi_fsmstate_idle; - ms->ipb_freq =mpc5xxx_get_bus_frequency (op->dev.of_node); + ms->ipb_freq =mpc5xxx_get_bus_frequency (&op->dev); ms->gpio_cs_count =of_gpio_count (op->dev.of_node);if (ms->gpio_cs_count >0 ) { master->num_chipselect = ms->gpio_cs_count;
drivers/tty/serial/mpc52xx_uart.c +2 -2
@@ -1630,7 +1630,7 @@ mpc52xx_console_setup(struct console *co, char *options)return ret; } - uartclk =mpc5xxx_get_bus_frequency (np); + uartclk =mpc5xxx_fwnode_get_bus_frequency (of_fwnode_handle (np));if (uartclk ==0 ) {pr_debug ("Could not find uart clock frequency!\n" );return -EINVAL ;
@@ -1747,7 +1747,7 @@ static int mpc52xx_uart_of_probe(struct platform_device *op)/* set the uart clock to the input clock of the psc, the different * prescalers are taken into account in the set_baudrate() methods * of the respective chip */ - uartclk =mpc5xxx_get_bus_frequency (op->dev.of_node); + uartclk =mpc5xxx_get_bus_frequency (&op->dev);if (uartclk ==0 ) {dev_dbg (&op->dev,"Could not find uart clock frequency!\n" );return -EINVAL ;
Signature · 1 line
2.35.1
PATCH v2 4/4 powerpc/52xx: Convert to use fwnode API
In reply to Andy ShevchenkoWe may convert the GPT driver to use fwnode API for the sake of consistency of the used APIs inside the driver.
---
v2: no changes
arch/powerpc/platforms/52xx/mpc52xx_gpt.c | 47 +++++++++++------------ 1 file changed, 22 insertions(+), 25 deletions(-)
arch/powerpc/platforms/52xx/mpc52xx_gpt.c +22 -25
@@ -53,10 +53,9 @@#include <linux/interrupt.h> #include <linux/io.h> #include <linux/list.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> #include <linux/mutex.h> -#include <linux/of.h> -#include <linux/of_platform.h> -#include <linux/of_gpio.h> #include <linux/kernel.h> #include <linux/property.h> #include <linux/slab.h>
@@ -64,7 +63,7 @@#include <linux/watchdog.h> #include <linux/miscdevice.h> #include <linux/uaccess.h> -#include <linux/module.h> +#include <asm/div64.h> #include <asm/mpc52xx.h>
@@ -235,18 +234,17 @@ static const struct irq_domain_ops mpc52xx_gpt_irq_ops = { .xlate = mpc52xx_gpt_irq_xlate, }; -static void -mpc52xx_gpt_irq_setup (struct mpc52xx_gpt_priv *gpt,struct device_node *node) +static void mpc52xx_gpt_irq_setup (struct mpc52xx_gpt_priv *gpt) {int cascade_virq;unsigned long flags;u32 mode; - cascade_virq =irq_of_parse_and_map (node,0 ); -if (!cascade_virq) + cascade_virq =platform_get_irq (to_platform_device (gpt->dev),0 ); +if (cascade_virq <0 )return ; - gpt->irqhost =irq_domain_add_linear (node,1 , &mpc52xx_gpt_irq_ops, gpt); + gpt->irqhost =irq_domain_create_linear (dev_fwnode (gpt->dev),1 , &mpc52xx_gpt_irq_ops, gpt);if (!gpt->irqhost) {dev_err (gpt->dev,"irq_domain_add_linear() failed\n" );return ;
@@ -670,8 +668,7 @@ static int mpc52xx_gpt_wdt_init(void)return err; } -static int mpc52xx_gpt_wdt_setup (struct mpc52xx_gpt_priv *gpt, -const u32 *period) +static int mpc52xx_gpt_wdt_setup (struct mpc52xx_gpt_priv *gpt,const u32 period) {u64 real_timeout;
@@ -679,14 +676,14 @@ static int mpc52xx_gpt_wdt_setup(struct mpc52xx_gpt_priv *gpt, mpc52xx_gpt_wdt = gpt;/* configure the wdt if the device tree contained a timeout */ -if (!period || *period ==0 ) +if (period ==0 )return 0 ; - real_timeout = (u64) *period *1000000000ULL ; + real_timeout = (u64 )period *1000000000ULL ;if (mpc52xx_gpt_do_start (gpt, real_timeout,0 ,1 ))dev_warn (gpt->dev,"starting as wdt failed\n" );else -dev_info (gpt->dev,"watchdog set to %us timeout\n" , *period); +dev_info (gpt->dev,"watchdog set to %us timeout\n" , period);return 0 ; }
@@ -697,8 +694,7 @@ static int mpc52xx_gpt_wdt_init(void)return 0 ; } -static inline int mpc52xx_gpt_wdt_setup (struct mpc52xx_gpt_priv *gpt, -const u32 *period) +static inline int mpc52xx_gpt_wdt_setup (struct mpc52xx_gpt_priv *gpt,const u32 period) {return 0 ; }
@@ -726,25 +722,26 @@ static int mpc52xx_gpt_probe(struct platform_device *ofdev)dev_set_drvdata (&ofdev->dev, gpt);mpc52xx_gpt_gpio_setup (gpt); -mpc52xx_gpt_irq_setup (gpt, ofdev->dev.of_node); +mpc52xx_gpt_irq_setup (gpt);mutex_lock (&mpc52xx_gpt_list_mutex);list_add (&gpt->list, &mpc52xx_gpt_list);mutex_unlock (&mpc52xx_gpt_list_mutex);/* check if this device could be a watchdog */ -if (of_get_property (ofdev->dev.of_node,"fsl,has-wdt" ,NULL ) || -of_get_property (ofdev->dev.of_node,"has-wdt" ,NULL )) { -const u32 *on_boot_wdt; +if (device_property_present (gpt->dev,"fsl,has-wdt" ) || +device_property_present (gpt->dev,"has-wdt" )) { +u32 on_boot_wdt =0 ; +int ret; gpt->wdt_mode = MPC52xx_GPT_CAN_WDT; - on_boot_wdt =of_get_property (ofdev->dev.of_node, -"fsl,wdt-on-boot" ,NULL ); -if (on_boot_wdt) { + ret =device_property_read_u32 (gpt->dev,"fsl,wdt-on-boot" , &on_boot_wdt); +if (ret) { +dev_info (gpt->dev,"can function as watchdog\n" ); + }else {dev_info (gpt->dev,"used as watchdog\n" ); gpt->wdt_mode |= MPC52xx_GPT_IS_WDT; - }else -dev_info (gpt->dev,"can function as watchdog\n" ); + }mpc52xx_gpt_wdt_setup (gpt, on_boot_wdt); }
Signature · 1 line
2.35.1
PATCH v2 3/4 powerpc/52xx: Get rid of of_node assignment
In reply to Andy ShevchenkoLet GPIO library assign of_node from the parent device. This allows to move GPIO library and drivers to use fwnode APIs instead of being stuck with OF-only interfaces.
---
v2: no changes
arch/powerpc/platforms/52xx/mpc52xx_gpt.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-)
arch/powerpc/platforms/52xx/mpc52xx_gpt.c +8 -10
@@ -58,6 +58,7 @@#include <linux/of_platform.h> #include <linux/of_gpio.h> #include <linux/kernel.h> +#include <linux/property.h> #include <linux/slab.h> #include <linux/fs.h> #include <linux/watchdog.h>
@@ -314,17 +315,15 @@ mpc52xx_gpt_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)return 0 ; } -static void -mpc52xx_gpt_gpio_setup (struct mpc52xx_gpt_priv *gpt,struct device_node *node) +static void mpc52xx_gpt_gpio_setup (struct mpc52xx_gpt_priv *gpt) {int rc; -/* Only setup GPIO if the device tree claims the GPT is -* a GPIO controller */ -if (!of_find_property (node,"gpio-controller" ,NULL )) +/* Only setup GPIO if the device claims the GPT is a GPIO controller */ +if (!device_property_present (gpt->dev,"gpio-controller" ))return ; - gpt->gc.label =kasprintf (GFP_KERNEL ,"%pOF" , node); + gpt->gc.label =kasprintf (GFP_KERNEL ,"%pfw" ,dev_fwnode (gpt->dev));if (!gpt->gc.label) {dev_err (gpt->dev,"out of memory\n" );return ;
@@ -336,7 +335,7 @@ mpc52xx_gpt_gpio_setup(struct mpc52xx_gpt_priv *gpt, struct device_node *node) gpt->gc.get = mpc52xx_gpt_gpio_get; gpt->gc.set = mpc52xx_gpt_gpio_set; gpt->gc.base =-1 ; - gpt->gc.of_node = node; + gpt->gc.parent = gpt->dev;/* Setup external pin in GPIO mode */ clrsetbits_be32(&gpt->regs->mode, MPC52xx_GPT_MODE_MS_MASK,
@@ -349,8 +348,7 @@ mpc52xx_gpt_gpio_setup(struct mpc52xx_gpt_priv *gpt, struct device_node *node) dev_dbg(gpt->dev, "%s() complete.\n", __func__); }#else /* defined(CONFIG_GPIOLIB) */ -static void -mpc52xx_gpt_gpio_setup (struct mpc52xx_gpt_priv *p,struct device_node *np) { } +static void mpc52xx_gpt_gpio_setup (struct mpc52xx_gpt_priv *gpt) { }#endif /* defined(CONFIG_GPIOLIB) */ /***********************************************************************
@@ -727,7 +725,7 @@ static int mpc52xx_gpt_probe(struct platform_device *ofdev)dev_set_drvdata (&ofdev->dev, gpt); -mpc52xx_gpt_gpio_setup (gpt, ofdev->dev.of_node); +mpc52xx_gpt_gpio_setup (gpt);mpc52xx_gpt_irq_setup (gpt, ofdev->dev.of_node);mutex_lock (&mpc52xx_gpt_list_mutex);
Signature · 1 line
2.35.1
Michael Ellerman
reviewerRe: [PATCH v2 4/4] powerpc/52xx: Convert to use fwnode API
In reply to Andy ShevchenkoQuoted 2 lines · Andy Shevchenko
We may convert the GPT driver to use fwnode API for the sake of consistency of the used APIs inside the driver.
I'm not sure about this one.
It's more consistent to use fwnode in this driver, but it's very inconsistent with the rest of the powerpc code. We have basically no uses of the fwnode APIs at the moment.
It seems like a pretty straight-forward conversion, but there could easily be a bug in there, I don't have any way to test it. Do you?
cheers
Quoted 125 lines
arch/powerpc/platforms/52xx/mpc52xx_gpt.c +22
-25@@ -53,10 +53,9 @@#include <linux/interrupt.h> #include <linux/io.h> #include <linux/list.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> #include <linux/mutex.h> -#include <linux/of.h> -#include <linux/of_platform.h> -#include <linux/of_gpio.h> #include <linux/kernel.h> #include <linux/property.h> #include <linux/slab.h> @@ -64,7 +63,7 @@#include <linux/watchdog.h> #include <linux/miscdevice.h> #include <linux/uaccess.h> -#include <linux/module.h> +#include <asm/div64.h> #include <asm/mpc52xx.h> @@ -235,18 +234,17 @@ static const struct irq_domain_ops mpc52xx_gpt_irq_ops = { .xlate = mpc52xx_gpt_irq_xlate, }; -static void -mpc52xx_gpt_irq_setup (struct mpc52xx_gpt_priv *gpt,struct device_node *node) +static void mpc52xx_gpt_irq_setup (struct mpc52xx_gpt_priv *gpt) {int cascade_virq;unsigned long flags;u32 mode; - cascade_virq =irq_of_parse_and_map (node,0 ); -if (!cascade_virq) + cascade_virq =platform_get_irq (to_platform_device (gpt->dev),0 ); +if (cascade_virq <0 )return ; - gpt->irqhost =irq_domain_add_linear (node,1 , &mpc52xx_gpt_irq_ops, gpt); + gpt->irqhost =irq_domain_create_linear (dev_fwnode (gpt->dev),1 , &mpc52xx_gpt_irq_ops, gpt);if (!gpt->irqhost) {dev_err (gpt->dev,"irq_domain_add_linear() failed\n" );return ;@@ -670,8 +668,7 @@ static int mpc52xx_gpt_wdt_init(void)return err; } -static int mpc52xx_gpt_wdt_setup (struct mpc52xx_gpt_priv *gpt, -const u32 *period) +static int mpc52xx_gpt_wdt_setup (struct mpc52xx_gpt_priv *gpt,const u32 period) {u64 real_timeout;@@ -679,14 +676,14 @@ static int mpc52xx_gpt_wdt_setup(struct mpc52xx_gpt_priv *gpt, mpc52xx_gpt_wdt = gpt;/* configure the wdt if the device tree contained a timeout */ -if (!period || *period ==0 ) +if (period ==0 )return 0 ; - real_timeout = (u64) *period *1000000000ULL ; + real_timeout = (u64 )period *1000000000ULL ;if (mpc52xx_gpt_do_start (gpt, real_timeout,0 ,1 ))dev_warn (gpt->dev,"starting as wdt failed\n" );else -dev_info (gpt->dev,"watchdog set to %us timeout\n" , *period); +dev_info (gpt->dev,"watchdog set to %us timeout\n" , period);return 0 ; }@@ -697,8 +694,7 @@ static int mpc52xx_gpt_wdt_init(void)return 0 ; } -static inline int mpc52xx_gpt_wdt_setup (struct mpc52xx_gpt_priv *gpt, -const u32 *period) +static inline int mpc52xx_gpt_wdt_setup (struct mpc52xx_gpt_priv *gpt,const u32 period) {return 0 ; }@@ -726,25 +722,26 @@ static int mpc52xx_gpt_probe(struct platform_device *ofdev)dev_set_drvdata (&ofdev->dev, gpt);mpc52xx_gpt_gpio_setup (gpt); -mpc52xx_gpt_irq_setup (gpt, ofdev->dev.of_node); +mpc52xx_gpt_irq_setup (gpt);mutex_lock (&mpc52xx_gpt_list_mutex);list_add (&gpt->list, &mpc52xx_gpt_list);mutex_unlock (&mpc52xx_gpt_list_mutex);/* check if this device could be a watchdog */ -if (of_get_property (ofdev->dev.of_node,"fsl,has-wdt" ,NULL ) || -of_get_property (ofdev->dev.of_node,"has-wdt" ,NULL )) { -const u32 *on_boot_wdt; +if (device_property_present (gpt->dev,"fsl,has-wdt" ) || +device_property_present (gpt->dev,"has-wdt" )) { +u32 on_boot_wdt =0 ; +int ret; gpt->wdt_mode = MPC52xx_GPT_CAN_WDT; - on_boot_wdt =of_get_property (ofdev->dev.of_node, -"fsl,wdt-on-boot" ,NULL ); -if (on_boot_wdt) { + ret =device_property_read_u32 (gpt->dev,"fsl,wdt-on-boot" , &on_boot_wdt); +if (ret) { +dev_info (gpt->dev,"can function as watchdog\n" ); + }else {dev_info (gpt->dev,"used as watchdog\n" ); gpt->wdt_mode |= MPC52xx_GPT_IS_WDT; - }else -dev_info (gpt->dev,"can function as watchdog\n" ); + }mpc52xx_gpt_wdt_setup (gpt, on_boot_wdt); }Signature · 1 line
2.35.1
Re: [PATCH v2 4/4] powerpc/52xx: Convert to use fwnode API
Quoted 9 lines · Michael Ellerman
Quoted 2 lines · Andy Shevchenko
We may convert the GPT driver to use fwnode API for the sake of consistency of the used APIs inside the driver.
I'm not sure about this one.
It's more consistent to use fwnode in this driver, but it's very inconsistent with the rest of the powerpc code. We have basically no uses of the fwnode APIs at the moment.
Fair point!
Quoted 2 lines
It seems like a pretty straight-forward conversion, but there could easily be a bug in there, I don't have any way to test it. Do you?
Nope, only compile testing. The important part of this series is to clean up of_node from GPIO library, so since here it's a user of it I want to do that. This patch is just ad-hoc conversion that I noticed is possible. But there is no any requirement to do so.
Lemme drop this from v3.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Re: [PATCH v2 4/4] powerpc/52xx: Convert to use fwnode API
Quoted 16 lines · Andy Shevchenko
Quoted 9 lines · Michael Ellerman
Quoted 2 lines · Andy Shevchenko
We may convert the GPT driver to use fwnode API for the sake of consistency of the used APIs inside the driver.
I'm not sure about this one.
It's more consistent to use fwnode in this driver, but it's very inconsistent with the rest of the powerpc code. We have basically no uses of the fwnode APIs at the moment.
Fair point!
Quoted 2 lines
It seems like a pretty straight-forward conversion, but there could easily be a bug in there, I don't have any way to test it. Do you?
Quoted 6 lines
Nope, only compile testing. The important part of this series is to clean up
of_nodefrom GPIO library, so since here it's a user of it I want to do that. This patch is just ad-hoc conversion that I noticed is possible. But there is no any requirement to do so.Lemme drop this from v3.
I just realize that there is no point to send a v3. You can just apply first 3 patches. Or is your comment against entire series?
Signature · 2 lines
With Best Regards, Andy Shevchenko
Michael Ellerman
reviewerRe: [PATCH v2 4/4] powerpc/52xx: Convert to use fwnode API
Quoted 22 lines · Andy Shevchenko
Quoted 21 lines · Andy Shevchenko
Quoted 9 lines · Michael Ellerman
Quoted 2 lines · Andy Shevchenko
We may convert the GPT driver to use fwnode API for the sake of consistency of the used APIs inside the driver.
I'm not sure about this one.
It's more consistent to use fwnode in this driver, but it's very inconsistent with the rest of the powerpc code. We have basically no uses of the fwnode APIs at the moment.
Fair point!
Quoted 2 lines
It seems like a pretty straight-forward conversion, but there could easily be a bug in there, I don't have any way to test it. Do you?
Nope, only compile testing. The important part of this series is to clean up
of_nodefrom GPIO library, so since here it's a user of it I want to do that. This patch is just ad-hoc conversion that I noticed is possible. But there is no any requirement to do so.
Quoted 4 lines
Quoted 1 line
Lemme drop this from v3.
I just realize that there is no point to send a v3. You can just apply first 3 patches. Or is your comment against entire series?
No, my comment is just about this patch.
I don't mind converting to new APIs when it's blocking some other cleanup. But given the age of this code I think it's probably better to just leave the rest of it as-is, unless someone volunteers to test it.
So yeah I'll just take patches 1-3 of this v2 series, no need to resend.
cheers
Re: [PATCH v2 4/4] powerpc/52xx: Convert to use fwnode API
Quoted 28 lines · Michael Ellerman
Quoted 22 lines · Andy Shevchenko
Quoted 21 lines · Andy Shevchenko
Quoted 9 lines · Michael Ellerman
Quoted 2 lines · Andy Shevchenko
We may convert the GPT driver to use fwnode API for the sake of consistency of the used APIs inside the driver.
I'm not sure about this one.
It's more consistent to use fwnode in this driver, but it's very inconsistent with the rest of the powerpc code. We have basically no uses of the fwnode APIs at the moment.
Fair point!
Quoted 2 lines
It seems like a pretty straight-forward conversion, but there could easily be a bug in there, I don't have any way to test it. Do you?
Nope, only compile testing. The important part of this series is to clean up
of_nodefrom GPIO library, so since here it's a user of it I want to do that. This patch is just ad-hoc conversion that I noticed is possible. But there is no any requirement to do so.Quoted 4 lines
Quoted 1 line
Lemme drop this from v3.
I just realize that there is no point to send a v3. You can just apply first 3 patches. Or is your comment against entire series?
Quoted 7 lines
No, my comment is just about this patch.
I don't mind converting to new APIs when it's blocking some other cleanup. But given the age of this code I think it's probably better to just leave the rest of it as-is, unless someone volunteers to test it.
So yeah I'll just take patches 1-3 of this v2 series, no need to resend.
Thanks!
One note though, the fwnode_for_each_parent_node() is not yet available in upstream, but will be after v5.19-rc1. It means the patch 3 can't be applied without that. That's why LKP complained on patch 4 in this series.
That said, the easiest way is to postpone it till v5.19-rc1 is out.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Quoted 3 lines · Andy Shevchenko
It seems
mpc52xx_get_xtal_freq()is not used anywhere. Remove dead code.
Patches 1-3 applied to powerpc/next.
[1/4] powerpc/52xx: Remove dead code, i.e. mpc52xx_get_xtal_freq()
https://git.kernel.org/powerpc/c/6d056b7254f9954522b7bb9947c8779a013d189f [2/4] powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode https://git.kernel.org/powerpc/c/de06fba62af64144aca6f8a8bedbc848d2e5b440 [3/4] powerpc/52xx: Get rid of of_node assignment https://git.kernel.org/powerpc/c/00bcb550dc60f73d593d2dbb718c4f521c7d7be8
cheers