Skip to contentSkip to conversation

ls1028a: hdp: Add config support for HDP firmware loading

PATCH In review Yangbo Lu 3 participants 4 messages May 10, 2022

lore
Share & tools
lore

Yangbo Lu

author
#0 lore raw

PATCH 1/1 ls1028a: hdp: Add config support for HDP firmware loading

From: Alison Wang <[email protected]>

This patch adds config support for HDP firmware loading on LS1028A.

---
 board/freescale/ls1028a/ls1028a.c            | 7 ++++++-
 configs/ls1028aqds_tfa_SECURE_BOOT_defconfig | 2 ++
 configs/ls1028aqds_tfa_defconfig             | 2 ++
 configs/ls1028ardb_tfa_SECURE_BOOT_defconfig | 2 ++
 configs/ls1028ardb_tfa_defconfig             | 2 ++
 5 files changed, 14 insertions(+), 1 deletion(-)
board/freescale/ls1028a/ls1028a.c +6 -1
index 71a086ef67..1a7806fad7 100644
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- * Copyright 2019, 2021 NXP
+ * Copyright 2019-2022 NXP
  */
 
 #include <common.h>
@@ -328,3 +328,8 @@ int checkboard(void)
 	return 0;
 }
 #endif
+
+void *video_hw_init(void)
+{
+	return NULL;
+}
configs/ls1028aqds_tfa_SECURE_BOOT_defconfig +2 -0
index 2e4db036a4..26613168f1 100644
@@ -98,3 +98,5 @@ CONFIG_WDT_SP805=y
 CONFIG_RSA=y
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_VIDEO=y
+CONFIG_VIDEO_LS_HDP_LOAD=y
configs/ls1028aqds_tfa_defconfig +2 -0
index 556f77e222..7e66e681fe 100644
@@ -103,3 +103,5 @@ CONFIG_WDT=y
 CONFIG_WDT_SP805=y
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_VIDEO=y
+CONFIG_VIDEO_LS_HDP_LOAD=y
configs/ls1028ardb_tfa_SECURE_BOOT_defconfig +2 -0
index 20cb844b01..024f9394b1 100644
@@ -92,3 +92,5 @@ CONFIG_WDT_SP805=y
 CONFIG_RSA=y
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_VIDEO=y
+CONFIG_VIDEO_LS_HDP_LOAD=y
configs/ls1028ardb_tfa_defconfig +2 -0
index fdfdf39c61..97e979ca97 100644
@@ -101,3 +101,5 @@ CONFIG_WDT=y
 CONFIG_WDT_SP805=y
 CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_VIDEO=y
+CONFIG_VIDEO_LS_HDP_LOAD=y
Signature · 1 line
2.25.1
#1 lore raw
Quoted 3 lines

From: Alison Wang <[email protected]>

This patch adds config support for HDP firmware loading on LS1028A.

FWIW, I really don't like this as this is just for a downstream kernel. For the upstream kernel the firmware should be loaded by the kernel itself. But unfortunately, there is no development there. (I have some half baked patches though and can confirm, that firmware loading is working from linux). Instead of this I'd like to see some work to support the DP PHY in upstream linux as this is really the last missing piece to get graphics working.

Now this is purely board related code, so it is probably fine. But in the past the handling of purly downstream stuff was removed from upstream u-boot anyway in favor of the upstream method. i.e. fixup of the ls1028a-gpu node.

-michael

#2 lore raw
Quoted 5 lines · Michael Walle
Quoted 3 lines

From: Alison Wang <[email protected]>

This patch adds config support for HDP firmware loading on LS1028A.

FWIW, I really don't like this as this is just for a downstream kernel.

This => what? I only see a config option. I searched the list and the source code for CONFIG_VIDEO_LS_HDP_LOAD and I don't see any user...

Quoted 1 line

For the upstream kernel the firmware should be loaded by the kernel itself.

In principle I agree.

Quoted 5 lines

But unfortunately, there is no development there. (I have some half baked patches though and can confirm, that firmware loading is working from linux). Instead of this I'd like to see some work to support the DP PHY in upstream linux as this is really the last missing piece to get graphics working.

It is? What did I miss?

Quoted 6 lines

Now this is purely board related code, so it is probably fine. But in the past the handling of purly downstream stuff was removed from upstream u-boot anyway in favor of the upstream method. i.e. fixup of the ls1028a-gpu node.

-michael

#3 lore raw

Am 2022-05-10 19:47, schrieb Vladimir Oltean:

Quoted 9 lines · Michael Walle
Quoted 5 lines
Quoted 3 lines

From: Alison Wang <[email protected]>

This patch adds config support for HDP firmware loading on LS1028A.

FWIW, I really don't like this as this is just for a downstream kernel.

This => what? I only see a config option. I searched the list and the source code for CONFIG_VIDEO_LS_HDP_LOAD and I don't see any user...

You are right, I didn't actually notice that. The whole loading thing
[1] is missing.

Quoted 11 lines
Quoted 1 line

For the upstream kernel the firmware should be loaded by the kernel itself.

In principle I agree.

Quoted 5 lines

But unfortunately, there is no development there. (I have some half baked patches though and can confirm, that firmware loading is working from linux). Instead of this I'd like to see some work to support the DP PHY in upstream linux as this is really the last missing piece to get graphics working.

It is? What did I miss?

I don't know? etnaviv is working [2 and more], mesa will be working soon [3]. mali-dp500 should have been working all the time. So only the output path is missing. If you are interested, this [4] is my take on the support, which is actually working. But I haven't found any time to look at it again. And I'm missing any documentation, so most information was found out by educated guesses and comparing to the downstream driver. I'd greatly appreciate any help ;)

[1] https://source.codeaurora.org/external/qoriq/qoriq-components/u-boot/tree/drivers/video/nxp/layerscape?h=integration
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/gpu/drm/etnaviv?id=12495f4eb298963565e0bdd37d8096ab1136d89f
[3] https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9255
[4] https://github.com/mwalle/linux/tree/feature-cdns-phy

-michael